Photothermal Effect Research Articles

Antimicrobial Peptide‐Modified Liquid Metal Nanomaterials for Enhanced Antibacterial Photothermal Therapy

The misuse of antibiotics has led to antibiotic‐resistant “superbugs,” prompting the exploration of alternative antibacterial strategies. This study focuses on the promising avenue of photothermal therapy (PTT). Despite numerous advantages, the clinical applicability of PTT as a sole sterilization strategy is hindered by the necessity for higher temperatures, potentially causing harm to healthy tissues. To overcome this challenge, this study introduces antimicrobial peptides (AMPs) to modify the surface of gallium‐based liquid metal (LM) nano‐antimicrobial agents, thereby enhancing their photothermal antibacterial effects within a lower temperature range. First, a novel LM composite nanomaterial, LM@AMP nanoparticles, is synthesized through a sonication process involving 1,2‐distearoyl‐sn‐glycero‐3‐phosphoethanolamine‐N‐[carboxy(polyethylene glycol)], AMP, and LM in an aqueous solution. Herein, AMPs not only contribute to the structural stability of LM nanoparticles but also enhance their selective interaction with bacterial cell membranes. Then, a thorough characterization of LM@AMP nanoparticles is performed, encompassing analyses through electron microscopy, determination of particle size, and assessment of zeta potential. Moreover, the exceptional photothermal properties exhibited by these nanoparticles are validated. Finally, this investigation demonstrates that LM@AMP nanoparticles selectively target bacterial cell membranes, showcasing efficient bactericidal effects (near 100%) at relatively low temperatures under near‐infrared irradiation.

Boosting photothermal-assisted photocatalytic H2 production over black g-C3N4 nanosheet photocatalyst via incorporation with carbon dots

Although photocatalytic H2 production based on semiconductor materials has a wide potential application, it still facing challenges such as slow reaction kinetics or complex synthesis processes. To meet these challenges, the carbon dots loaded black g-C3N4 (CN-B-CDs) was synthesized by simple calcination method to achieve efficient photothermal-assisted photocatalytic H2 production. Photothermal imaging experiments confirmed the photothermal effect of CN-B and CDs as dual heat sources to increase the temperature of the composite system, thus improving the effective separation of photo-generated charges. In addition, multiple photocatalytic H2 production tests exhibited that CN-B-CDs photocatalysts not only have strong stability but also can accommodate a variety of complex water bodies, which displayed the potential for industrial application. This study combined the photothermal effect and the mechanism by which the CDs promote the charge transfer to design a new photocatalytic H2 production system and provided a new scheme for achieving efficient photothermal-assisted photocatalytic H2 production using carbon-based materials.

Double-Enhanced Photothermal Lateral Flow Biosensor Based on Dual Gold Nanoparticle Conjugates.

Bacterial toxins emerge as the primary triggers of foodborne illnesses, posing a significant threat to human health. To ensure food safety, it is imperative to implement point-of-care testing methods. Lateral flow biosensors (LFBs) based on gold nanoparticles (GNPs) have been commonly used for rapid detection, but their applicationis limited by low sensitivity. Based on the localized surface plasmon resonance and photothermal effect of dual gold nanoparticle conjugates (DGNPs), we developed a smartphone-integrated photothermal LFB (PLFB) with double-enhanced colorimetric and photothermal sensitivity. Through numerical simulations, we verified that DGNPs have significantly enhanced photothermal performance compared to single 15 nm GNPs (SGNPs), and applied DGNPs in PLFB for the detection of staphylococcus enterotoxin A (SEA). The colorimetric and photothermal limits of detection of DGNPs-based PLFB for SEA were 0.091 and 0.0038 ng mL-1, respectively. Compared with the colorimetric detection of the SGNPs-based LFB, the colorimetric detection sensitivity of the DGNPs-based PLFB was increased by 10.7 times, and the photothermal detection sensitivity was further improved by 255.3 times. Moreover, the PLFB exhibits robust reproducibility and exceptional specificity and is applicable for detecting SEA in milk samples. This smartphone-integrated PLFB based on DGNPs allows users to detect toxins simply, conveniently, and quickly and has huge application potential in the field of food safety.

Tumor Microenvironment-Activatable Phototheranostic: Leveraging Nitric Oxide and Weak Acidity as Dual Biomarkers for Ratiometric Fluorescence, Photoacoustic Imaging, and Photothermal Therapy.

Tumor microenvironment-responsive phototheranostic agents are highly sought after for their ability to improve diagnostic accuracy and treatment specificity. Here, we introduce a novel single-molecule probe, POZ-NO, which is activated by nitric oxide (NO) and weak acidity, enabling dual-mode imaging and photothermal therapy (PTT) of tumors. In acidic environments with elevated NO levels, POZ-NO exhibits a distinctive ratiometric fluorescence signal shift from the red to near-infrared, accompanied by a 700 nm photoacoustic signal. Additionally, POZ-NO demonstrated potent photothermal effects upon NO and acidity activation, achieving an impressive conversion efficiency of 74.3% under 735 nm laser irradiation. In vivo studies confirm POZ-NO's ability to accurately image tumors through ratiometric fluorescence and photoacoustic modes while selectively treating tumors with PTT.

Reinforcing Carrier‐Free Photothermal Nanodrugs Through Flavonol‐Driven Assembly

AbstractCarrier‐free nanodrugs that integrate chemodrugs and other therapeutic agents demonstrate good efficacy and minimized side effects, showing promise for combined therapy. However, a key challenge lies in enhancing the bioavailability and therapeutic potential of the nanodrugs through a controllable assembly process. Herein, a carrier‐free photothermal nanodrug (ZPQ NPs) is constructed through flavonol‐driven assembly with amine‐substituted perylene diimide for enhanced chemo‐photothermal combined cancer therapy. The flavonol, particularly quercetin, facilitates J‐aggregation of perylene diimide derivatives within the nanodrug and contributes to multiple improvements, including red‐shifted absorption, enhanced fluorescence intensity, improved photothermal conversion efficiency as well as excellent photostability. Moreover, the nanodrug also demonstrates enhanced cellular uptake and intracellular reactive oxygen species scavenging capability. The combination of quercetin and photothermal effect effectively kills cancer cells, as well as alleviates inflammation following photothermal therapy. Guided by in vivo fluorescence imaging, the application of ZPQ NPs results in complete tumor elimination and effectively inhibits tumor recurrence through chemo‐photothermal combined therapy. This work presents a straightforward strategy for constructing carrier‐free nanodrugs that exhibit simultaneous enhancements in both photophysical properties and biological activity.

Gold core@CeO2 halfshell Janus nanocomposites catalyze targeted sulfate radical for periodontitis therapy

The sulfate radical (SO4•-), known for its high reactivity and long lifespan, has emerged as a potent antimicrobial agent. Its exceptional energy allows for the disruption of vital structures and metabolic pathways in bacteria that are usually inaccessible to common radicals. Despite its promising potential, the efficient generation of this radical, particularly through methods involving enzymes and photocatalysis, remains a substantial challenge. Here, we capitalized on the peroxidase (POD)-mimicking activity and photocatalytic properties of cerium oxide (CeO2) nanozymes, integrating these properties with the enhanced concept of plasma gold nanorod (GNR) to develop a half-encapsulated core@shell GNRs@CeO2 Janus heterostructure impregnated with persulfate. Under near-infrared irradiation, the GNRs generate hot electrons, thereby boosting the CeO2's enzyme-like activity and initiating a potent reactive oxygen species (ROS) storm. This distinct nanoarchitecture facilitates functional specialization, wherein the heterostructure and efficient light absorption ensured continuous hot electron flow, not only enhancing the POD-like activity of CeO2 for the production of SO4•- effectively, but also contributing a significant photothermal effect, disrupting periodontal plaque biofilm and effectively eradicating pathogens. Furthermore, the local temperature elevation synergistically enhances the POD-like activity of CeO2. Transcriptomics analysis, as well as animal experiments of the periodontitis model, have revealed that pathogens undergo genetic information destruction, metabolic disorders, and pathogenicity changes in the powerful ROS system, and profound therapeutic outcomes in vivo, including anti-inflammation and bone preservation. This study demonstrated that energy transfer to augment nanozyme activity, specifically targeting ROS generation, constitutes a significant advancement in antibacterial treatment.

NIR-Responsive Methotrexate-Modified Iron Selenide Nanorods for Synergistic Magnetic Hyperthermic, Photothermal, and Chemodynamic Therapy.

Breast cancer is a malignant tumor with a high mortality rate among women. Therefore, it is necessary to develop novel therapies to effectively treat this disease. In this study, iron selenide nanorods (FeSe2 NRs) were designed for use in magnetic hyperthermic, photothermal, and chemodynamic therapy (MHT/PTT/CDT) for breast cancer. To illustrate their efficacy, FeSe2 NRs were modified with the chemotherapeutic agent methotrexate (MTX). MTX-modified FeSe2 (FeSe2-MTX) exhibited excellent controlled drug release properties. Fe2+ released from FeSe2 NRs induced the release of •OH from H2O2 via a Fenton/Fenton-like reaction, enhancing the efficacy of CDT. Under alternating magnetic field (AMF) stimulation and 808 nm laser irradiation, FeSe2-MTX exerted potent hyperthermic and photothermal effects by suppressing tumor growth in a breast cancer nude mouse model. In addition, FeSe2 NRs can be used for magnetic resonance imaging in vivo by incorporating their superparamagnetic characteristics into a single nanomaterial. Overall, we presented a novel technique for the precise delivery of functional nanosystems to tumors that can enhance the efficacy of breast cancer treatment.

NF-κB-Signaling-Targeted Immunomodulatory Nanoparticle with Photothermal and Quorum-Sensing Inhibition Effects for Efficient Healing of Biofilm-Infected Wounds.

The development of therapeutics with high antimicrobial activity and immunomodulatory effects is urgently needed for the treatment of infected wounds due to the increasing danger posed by recalcitrant-infected wounds. In this study, we developed light-controlled antibacterial, photothermal, and immunomodulatory biomimetic N/hPDA@M nanoparticles (NPs). This nanoplatform was developed by loading flavonoid naringenin onto hollow mesoporous polydopamine NPs in a π-π-stacked configuration and encasing them with macrophage membranes. First, our N/hPDA@M NPs efficiently neutralized inflammatory factors present within the wound microenvironment by the integration of macrophage membranes. Afterward, the N/hPDA@M NPs effectively dismantled bacterial biofilms through a combination of the photothermal properties of PDA and the quorum sensing inhibitory effects of naringenin. It is worth noting that N/hPDA@M NPs near-infrared-enhanced release of naringenin exhibited specificity toward the NF-κB-signaling pathway, effectively mitigating the inflammatory response. This innovative design not only conferred remarkable antibacterial properties upon the N/hPDA@M NPs but also endowed them with the capacity to modulate inflammatory responses, curbing excessive inflammation and steering macrophage polarization toward the M2 phenotype. As a result, this multifaceted approach significantly contributes to expediting the healing process of infected skin wounds.

Nanostructured systems based on pluronics to carry gold nanoparticles and methylene blue aiming for multimodal therapy

The rise of multidrug-resistant microorganisms has become a cause of concern in the biomedical field. In this sense, this study focuses on the development of an effective treatment for infectious diseases mediated by Multimodal Therapy, combining Photodynamic Therapy (PDT), and Photothermal Therapy (PTT). The system involves the synthesis and stabilization of gold nanoparticles (AuNPs) in Pluronic® micelles of F-127 and P-84, combined with the Methylene Blue (MB) aiming effects against microorganisms. It is noteworthy that the AuNPs were synthesized in situ in the copolymer using the solid dispersion technique. These copolymers were strategically chosen for evaluation purposes with our study involving P-123 previously published in this journal. Thus, the effect of the length of the PEO and PPO blocks can be delineated concerning the synthesis of AuNPs. In this case, copolymer F127 has PPO blocks identical to P-123 while P-84 has PEO blocks compatible with P-123. Characterization of the formulations included electronic absorption spectroscopy, dynamic light scattering, and transmission electron microscopy. Fluorescence quenching studies by Stern Volmer plots indicated the location of the MB in the hydrophilic corona of the micelles. In general, was verified that reducing the PEO/PPO ratio favors the formation of AuNPs, possibly due to the greater number of reducing sites per unit mass of the polymer. The formulations remained stable for at least 15 days, and photothermal studies showed a temperature increase of at least 11 °C. The photothermal effect proved reversible after three heating–cooling cycles, revealing a synergy between MB and AuNPs in heat generation, hindered by increased irradiance and rapid photobleaching of MB. The in vitro susceptibility tests with Candida albicans and Staphylococcus aureus demonstrated effective inhibition of the microorganisms. The result shows that AuNPs for itself do not affect the fungal/bacteria lineage. However, the MB/AuNPs combination samples, showed excellent fungal and bacterial inhibition at low drug concentrations.

Cotton Fabric-Reinforced Hydrogels with Excellent Mechanical and Broad-Spectrum Photothermal Antibacterial Properties

Antibacterial hydrogel wound dressings hold great potential in eliminating bacteria and accelerating the healing process. However, it remains a challenge to fabricate hydrogel wound dressings that simultaneously exhibit excellent mechanical and photothermal antibacterial properties. Here we report the development of polydopamine-functionalized graphene oxide (rGO@PDA)/calcium alginate (CA)/Polypyrrole (PPy) cotton fabric-reinforced hydrogels (abbreviated as rGO@PDA/CA/PPy FHs) for tackling bacterial infections. The mechanical properties of hydrogels were greatly enhanced by cotton fabric reinforcement and an interpenetrating structure, while excellent broad-spectrum photothermal antibacterial properties based on the photothermal effect were obtained by incorporating PPy and rGO@PDA. Results indicated that rGO@PDA/CA/PPy FHs exhibited superior tensile strength in both the warp (289 ± 62.1 N) and weft directions (142 ± 23.0 N), similarly to cotton fabric. By incorporating PPy and rGO@PDA, the swelling ratio was significantly decreased from 673.5% to 236.6%, while photothermal conversion performance was significantly enhanced with a temperature elevated to 45.0 °C. Due to the synergistic photothermal properties of rGO@PDA and PPy, rGO@PDA/CA/PPy FHs exhibited excellent bacteria-eliminating efficiency for S. aureus (0.57%) and E. coli (3.58%) after exposure to NIR for 20 min. We believe that the design of fabric-reinforced hydrogels could serve as a guideline for developing hydrogel wound dressings with improved mechanical properties and broad-spectrum photothermal antibacterial properties for infected-wound treatment.

A Multifunctional Nanoreactor-Induced Dual Inhibition of HSP70 Strategy for Enhancing Mild Photothermal/Chemodynamic Synergistic Tumor Therapy.

Mild photothermal therapy (PTT) is a spatiotemporally controllable method that utilizes the photothermal effect at relatively low temperatures (40-45°C) to especially eliminate tumor tissues with negligible side effects on the surrounding normal tissues. However, the overexpression of heat shock protein 70 (HSP70) and limited effect of single treatment drastically impede the therapeutic efficacy. Herein, the constructed multifunctional core-shell structured Ag-Cu@SiO2-PDA/GOx nanoreactors (APG NRs) that provide a dual inhibition of HSP70 strategy for the second near-infrared photoacoustic (NIR-II PA) imaging-guided combined mild PTT/chemodynamic therapy (CDT). The Ag-Cu cores can convert endogenous H2O2 to hydroxyl radical (•OH), which can induce lipid peroxidation (LPO) and further degrade HSP70. The polydopamine (PDA)/glucose oxidase (GOx) shells are utilized as the NIR-II photothermal agent to generate low temperature, and the GOx can reduce the energy supplies and inhibit energy-dependent HSP70 expression. Furthermore, both the generation of •OH and GOx-mediated energy shortage can reduce HSP70 expression to sensitize mild PTT under 1064nm laser, and in turn, GOx and laser self-amplify the catalytic reactions of APG NRs for more production of •OH. The multifunctional nanoreactors will provide more potential possibilities for the clinical employment of mild PTT and the advancement of tumor combination therapies.

A novel nanoplasmonic-based diagnosis platform: Advances and emerging technologies

The development of a rapid, simple, inexpensive, and sensitive nucleic acid assay is critical in ultrafast diagnostic systems to prevent the rapid spread of novel infectious agents. However, current representative diagnostic methods, such as the polymerase chain reaction (PCR), are bulky, expensive, complex, and time-consuming. The plasmonic photothermal effect of plasmonic materials is widely used in biological applications because of excellent properties, such as strong optical properties and enhanced local electromagnetic field. PCR methods using plasmonic nanostructures are used to overcome the limitations of conventional PCR. Therefore, plasmonic photothermal-based PCR exhibit a rapid ramping rate, ultrafast amplification, high sensitivity, cost-effectiveness, and compactness, which can be used as a point-of-care device in situ. This study reviewed the mechanisms of plasmonic PCR and various materials, such as organic, inorganic, and hybrid materials, used in PCR. Furthermore, the properties, light source, amplification efficiency, and monitoring method of classified plasmonic materials were compared. This review introduced the disease diagnosis application using plasmonic PCR and evaluated the prospect of potential future applications as next-generation PCR.

Doping Engineering To Modulate Surface Plasmon Resonance and Enzyme-like Activities for Enhancing Photoacoustic Imaging-Guided Targeted Cancer Therapy in the Second Near-Infrared Window.

Biological imaging-guided targeted tumor therapy has been a soughtafter goal in the field of cancer diagnosis and treatment. To this end, we proposed a strategy to modulate surface plasmon resonance and endow WO3-x nanoparticles (NPs) with enzyme-like catalytic properties by doping Fe2+ in the structure of the NPs. Doping of the Fe2+ introduced oxygen vacancies into the structure of the NPs, inducing a red shift of the maximum absorption wavelength into the near-infrared II (NIR-II) region and enhancing the photoacoustic (PA) and photothermal properties of the NPs for more effective imaging-guided cancer therapy. Under NIR-II laser irradiation, the Fe-WO3-x NPs produced very strong NIR-II PA and photothermal effects, which significantly enhanced the PA imaging and photothermal treatment effects. On the other hand, Fe2+ in Fe-WO3-x could undergo Fenton reactions with H2O2 in the tumor tissue to generate ·OH for chemodynamic therapy. In addition, Fe-WO3-x can also catalyze the above reactions to produce more reactive oxygen species (ROS) and induce the oxidation of NADH to interfere with intracellular adenosine triphosphate (ATP) synthesis, thereby further improving the efficiency of cancer therapy. Specific imaging of tumor tissue and targeted synergistic therapy was achieved after ligation of a MUC1 aptamer to the surface of the Fe-WO3-x NPs by the complexing of -COOH in MUC1 with tungsten ions on the surface of the NPs. These results demonstrated that Fe-WO3-x NPs could be a promising diagnosis and therapeutic agent for cancer. Such a study opens up new avenues into the rational design of nanodiagnosis and treatment agents for NIR-II PA imaging and cancer therapy.

Balancing Bioresponsive Biofilm Eradication and Guided Tissue Repair via Pro-Efferocytosis and Bidirectional Pyroptosis Regulation during Implant Surgery.

There is an increasingly growing demand to balance tissue repair guidance and opportunistic infection (OI) inhibition in clinical implant surgery. Herein, we developed a nanoadjuvant for all-stage tissue repair guidance and biofilm-responsive OI eradication via in situ incorporating Cobaltiprotoporphyrin (CoPP) into Prussian blue (PB) to prepare PB-CoPP nanozymes (PCZs). Released CoPP possesses a pro-efferocytosis effect for eliminating apoptotic and progressing necrotic cells in tissue trauma, thus preventing secondary inflammation. Once OIs occur, PCZs with switchable nanocatalytic capacity can achieve bidirectional pyroptosis regulation. Once reaching the acidic biofilm microenvironment, PCZs possess peroxidase (POD)-like activity that can generate reactive oxygen species (ROS) to eradicate bacterial biofilms, especially when synergized with the photothermal effect. Furthermore, generated ROS can promote macrophage pyroptosis to secrete inflammatory cytokines and antimicrobial proteins for biofilm eradication in vivo. After eradicating the biofilm, PCZs possess catalase (CAT)-like activity in a neutral environment, which can scavenge ROS and inhibit macrophage pyroptosis, thereby improving the inflammatory microenvironment. Briefly, PCZs as nanoadjuvants feature the capability of all-stage tissue repair guidance and biofilm-responsive OI inhibition that can be routinely performed in all implant surgeries, providing a wide range of application prospects and commercial translational value.

Nucleus-targeted carbon dots as peroxidase nanozyme for photoacoustic imaging and phototherapy of tumor

High-purity carbon dots (CDs) with a highly π-conjugated sp2-hybridized graphite structure were prepared by the pulse electrolysis method using the graphite plate as raw material. Photoacoustic signal together with photothermal effect was found in the CDs-dispersed suspensions under near-infrared (NIR) irradiation. For the suspension with the CDs concentration of 500 μg/mL, the photothermal conversion efficiency is high up 64.3% and the solution’s temperature can be increased to 82.2 °C under NIR irradiation. Moreover, CDs can be effectively endocytosed by human hepatoma (HepG2) cells with a few hours, act as peroxidase nanozyme to decompose H2O2 and facilitate the production of reactive oxygen species. Under NIR irradiation, CDs exhibit an outstanding apoptosis-inducing effect on HepG2 cells by the photothermal effect. In addition, in vivo experiments show that CDs can be used in photoacoustic imaging (PAI) and guiding the tumor treatment. As a result, the nucleus-targeted CDs with an unique combination of PAI and photothermal effect have potential in cancer diagnosis and treatment.

Bidirectional π − π stacking for near-infrared photothermal effects and photo-thermo-electric conversion in a semiconductive hydroxamate coordination polymer

Photo-thermo-electric conversion is an emerging technology for utilizing solar energy. As the main component, photothermal materials play a significant role in achieving high conversion efficiency from sunlight to electrical energy. Organic photothermal materials have attracted intense attention recently due to their excellent photothermal efficiency and recycling capabilities. However, broad sunlight absorption in organics heavily relies on the realization of intramolecular or intermolecular charge transfer. Exploring more versatile and efficient methods to construct materials with broad sunlight absorption remains a great challenge. Herein, we report a novel photothermal compound from the perspective of modulating molecular assembly structure. By combining two distinct metal ions, Ba2+ and Mn2+, with the planar ligand H2ONDI, a new coordination polymer, {[BaMn(ONDI)2(H2O)3]⋅H2O}n (1), can be obtained. This coordination polymer exhibits rare bidirectional π−π stacking columns along both the a and b axis. The tightly bidirectional arrangement of ligands in 1 results in a broad optical absorption from the ultraviolet region to the near-infrared area, leading to intriguing near-infrared photothermal effects under irradiation of a laser of 808 nm with a efficiency of 42.3 %. By integrating with thermoelectric devices, 1 shows good application potential in the field of photo-thermo-electric conversion, with the maximum open circuit voltage reaching 313 mV under the irradiation of 1 sun. Furthermore, 1 displays semiconducting behavior because the presence of bidirectional π−π stacking columns facilitates charge transport along two directions, including hopping and band-like charge transport.

MXene-Enhanced Ionovoltaic Effect by Evaporation and Water Infiltration in Semiconductor Nanochannels.

In recent years, substantial attention has been directed toward energy-harvesting systems that exploit sunlight energy and water resources. Intensive research efforts are underway to develop energy generation methodologies through interactions with water using various materials. In the present investigation, we synthesized sodium vanadium oxide (SVO) nanorods with n-type semiconductor characteristics. These nanorods facilitate the initiation of capillary phenomena within nanochannels, thereby enhancing the interfacial area between nanomaterials and ions. The open-circuit voltage (VOC) was 0.8 V, and the short-circuit current (ISC) was 30 μA, which were continuously monitored at room temperature using a 0.1 M saltwater solution. Additionally, we achieved enhanced energy generation by efficiently converting light energy into thermal energy using MXene, a 2D material. This was accomplished through the photothermal effect, leveraging the inherent semiconductor characteristics. Under light exposure, the system exhibited improved performance attributed to heightened ion diffusion and increased conductivity. This phenomenon was a result of the concerted synergy between ions and electrons facilitated by a semiconductor nanofluidic channel. Ultimately, we demonstrated an application to showcase real-world viability. In this scenario, electricity was harvested through a smart buoy floating on the water, and, based on this, data from the surrounding environment was sensed and wirelessly transmitted.

An Immune-Regulating Polysaccharide Hybrid Hydrogel with Mild Photothermal Effect and Anti-Inflammatory for Accelerating Infected Wound Healing.

Bacterial infections and excessive inflammation present substantial challenges for clinical wound healing. Hydrogels with mild photothermal (PTT) effects have emerged as promising agents owing to their dual actions: positive effects on cells and negative effects on bacteria. Here, an injectable self-healing hydrogel of oxidized konjac glucomannan/arginine-modified chitosan (OKGM/CS-Arg, OC) integrated with protocatechualdehyde-@Fe (PF) nanoparticles capable of effectively absorbing near-infrared radiation is synthesized successfully. The OC/PF hydrogels exhibit excellent mechanical properties, biocompatibility, and antioxidant activity. Moreover, in synergy with PTT, OC/PF demonstrates potent antibacterial effects while concurrently stimulating cell migration and new blood vessel formation. In methicillin-resistant Staphylococcus aureus-infected full-thickness mouse wounds, the OC/PF hydrogel displays remarkable antibacterial and anti-inflammatory activities, and accelerates wound healing by regulating the wound immune microenvironment and promoting M2 macrophage polarization. Consequently, the OC/PF hydrogel represents a novel therapeutic approach for treating multidrug-resistant bacterial infections and offers a technologically advanced solution for managing infectious wounds in clinical settings.

A MXene Hydrogel-Based Versatile Microrobot for Controllable Water Pollution Management.

The urgent demand for addressing dye contaminants in water necessitates the development of microrobots that exhibit remote navigation, rapid removal, and molecular identification capabilities. The progress of microrobot development is currently hindered by the scarcity of multifunctional materials. In this study, a plasmonic MXene hydrogel (PM-Gel) is synthesized by combining bimetallic nanocubes and Ti3C2Tx MXene through the rapid gelation of degradable alginate. The hydrogel can efficiently adsorb over 60% of dye contaminants within 2 min, ultimately achieving a removal rate of >90%. Meanwhile, the hydrogel exhibits excellent sensitivity in surface enhanced Raman scattering (SERS) detection, with a limit of detection (LOD) as low as 3.76 am. The properties of the plasmonic hydrogel can be further adjusted for various applications. As a proof-of-concept experiment, thermosensitive polymers and superparamagnetic particles are successfully integrated into this hydrogel to construct a versatile, light-responsive microrobot for dye contaminants. With magnetic and optical actuation, the robot can remotely sample, identify, and remove pollutants in maze-like channels. Moreover, light-driven hydrophilic-hydrophobic switch of the microrobots through photothermal effect can further enhance the adsorption capacity and reduced the dye residue by up to 58%. These findings indicate of a broad application potential in complex real-world environments.

Quantitative investigation on the effects of eyeball geometry, blood perfusion and natural convection in retinal laser surgery

The photothermal effects of laser on tissue are widely used in ophthalmology to treat retinal diseases. The accurate modelling of retinal laser surgery will prove valuable guidance for clinic treatment. There are several important issues should be carefully evaluated during retinal laser surgery modelling, including the eye geometry (whole eye or fundus only, retinal pigment epithelium layer incorporated or not), blood perfusion and natural convection. In previous publications, the existence of the anterior part of eyeball and retinal pigment epithelium layer is neglected to simply the eye geometry due to low laser light absorption (anterior part of eyeball) or small volume occupation (retinal pigment epithelium layer), respectively. However, the justification of this treatment has not been conducted. In this study, we will quantitatively investigate these factors systemically in a large pulse duration range that covers all the retinal laser surgery used in clinic. To do this, we present a bioheat transfer model for the simulation of the thermal response of the eye to laser irradiation. In the simulation, the 3D whole-eye geometry is considered. The Pennes bioheat transfer equation is adopted for the whole-eye temperature modelling. Simultaneously, we treat the fundus as a multilayered medium that all primary components, including RPE layer, are considered for first time in whole eye modelling. Our model calculates the thermal responses of the eye during laser retinal surgery with the pulse duration from nanosecond to tens of second. The effects of eye geometry, blood perfusion and natural convection are clearly clarified based on the laser pulse duration and incident energy used. The results show that neglecting the anterior part of eyeball will introduce the computational error more than 27 %. The existence of the retinal pigment epithelium layer should always be considered in retinal laser surgery modelling in all pulse durations used in clinic, otherwise more than 20 % computational error will be generated. When the pulse duration is longer than 10s, the effect of blood perfusion and natural convection in vitreous body should both be considered.