Photoresponsive Hydrogels Research Articles

Synthetic Photoresponsive Hydrogels Enable In Situ Control Over Murine Intestinal Monolayer Differentiation and Crypt Formation

AbstractAs a model of the intestinal epithelium, intestinal stem cells (ISCs) are grown and differentiated as monolayers on materials where stochastic organization of the crypt and villi cells occurs. An allyl sulfide crosslinked photoresponsive hydrogel with a shear modulus of 1.6 kPa is developed and functionalized with GFOGER, Bm‐binder peptide ligands for monolayer growth of ISCs. The allyl sulfide chemistry allows in situ control of mechanics in the presence of growing ISC monolayers and structured irradiation affords spatial regulation of the hydrogel properties. Specifically, ISC monolayers grown on 1.6 kPa substrates are in situ softened to 0.29 kPa, using circular patterns 50, 75, and 100 µm in diameter, during differentiation, resulting in control over the size and arrangement of de novo crypts and monolayer cellularity. These photoresponsive materials should be useful in applications ranging from studying crypt evolution to drug screening and transport across tissues of changing cellular composition. Spatiotemporal softening enables control over the size and arrangement of de novo crypts within intestinal monolayers.

The Photocleavable Protein PhoCl-Based Dynamic Hydrogels.

Dynamic protein hydrogels have attracted increasing attention owing to their tunable physiochemical and mechanical properties, customized functionality, and biocompatibility. Among the different types of dynamic hydrogels, photoresponsive hydrogels are of particular interest. Here, we report the engineering of a photoresponsive protein hydrogel by using the photocleavable protein PhoCl. We employed the well-developed SpyTag and SpyCatcher chemistry to engineer PhoCl-containing covalently cross-linked hydrogels. In the hydrogel network, PhoCl, which can be cleaved into two fragments upon violet irradiation, is employed as a dynamic structural motif to regulate the cross-linking density of the hydrogel network. The resultant PhoCl-containing hydrogels showed photoresponsive viscoelastic properties. Upon violet irradiation, the PhoCl hydrogels soften, leading to an irreversible reduction in the storage moduli. However, no gel-sol transition was observed. Leveraging this light-induced stiffness change, we employed this hydrogel as a cell culture substrate to investigate the mechanobiological response of NIH-3T3 fibroblast cells. Our results showed that 3T3 cells can change their morphologies in response to the stiffness change of the PhoCl hydrogel substrate dynamically, rendering PhoCl-based hydrogels a useful substrate for other mechanobiological studies.

Optically Mediated Hydrogel-Based Ionic Diode.

Ionic diodes with environmentally modulated ion-rectifying characteristics have attracted much attention and show great promise in the construction of smart devices with environmental adaptability. One immediate challenge is to integrate stimuli responsiveness and ion rectification into one single ionic diode, which requires a close cooperation of chemical principles and device technologies. Herein, an ionic diode based on a photoresponsive hydrogel with optically mediated ion-rectifying performances is introduced. Relying on the photoresponsive concentration of proton in the hydrogel, the ionic current rectification can be prominently enhanced upon ultraviolet (UV) irradiation. A maximum ionic current rectification ratio of the optically mediated ionic diode about 4× 105 is achieved. Furthermore, the hydrogel-based diode can serve as an AND logic gate operated by UV light and voltage bias as two independent inputs. As a proof of concept, to use the optically mediated diode is achieved to modulate the feedback of a robot with logic behaviors. This work provides a novel and valuable strategy for designing functional hydrogel-based devices with the integration of stimuli-responsiveness and logic signal processing through chemical approaches.

Photo-programmable hydrogel iontronics for electrically and chromatically rewritable circuits

Hydrogel-based iontronics is emerging as a promising frontier in healthcare and human-machine interfacing (HMI), offering excellent compatibility with biological systems in terms of electrical, chemical, and mechanical properties. However, conventional hydrogel systems have limitations in dynamically regulating their electrical and optical properties, which restricts their use in adaptive electronics and responsive interfaces. In this study, we present a new hydrogel system with UV photochemistry-induced reversible conductivity, enabling reversible changes in conductivity. Unlike typical photo-responsive hydrogels that revert to their original states upon removal of the light source, the new hydrogel can maintain its activated states without continuous light exposure, facilitating practical applications. By leveraging the photobase triphenylmethane leucohydroxide and photoacid n-nitrobenzaldehyde, we achieve a significant increase in photo-induced conductivity compared to existing photo-ionic hydrogels. Combining the effective photo-induced conductivity and the accompanied photochromatic effect, we demonstrate a full hydrogel-based stylus pad capable of tracking motion and strokes, and a soft calculator keypad with programmable conductivity and imprinted patterns. These advancements underscore the importance of actively controlling localized conductivity and processing light inputs in hydrogels, exhibiting their potential for diverse applications in bioelectronics and HMI.

Generation of precision microstructures based on reconfigurable photoresponsive hydrogels for high-resolution polymer replication and microoptics

Microstructured molds are essential for fabricating various components ranging from precision optics and microstructured surfaces to microfluidics. However, conventional fabrication technology such as photolithography requires expensive equipment and a large number of processing steps. Here, we report a facile method to fabricate micromolds based on a reusable photoresponsive hydrogel: Uniform micropatterns are engraved into the hydrogel surface using photo masks under UV irradiation within a few minutes. Patterns are replicated using polydimethylsiloxane with minimum feature size of 40 μm and smoothness of Rq ~ 3.4 nm. After replication, the patterns can be fully erased by light thus allowing for reuse as a new mold without notable loss in performance. Utilizing greyscale lithography, patterns with different height levels can be produced within the same exposure step. We demonstrate the versatility of this method by fabricating diffractive optical elements devices and a microlens array and microfluidic device with 100 µm wide channels.

Photoresponsive Hydrogels for Tissue Engineering.

Hydrophilic and biocompatible hydrogels are widely applied as ideal scaffolds in tissue engineering. The "smart" gelation material can alter its structural, physiochemical, and functional features in answer to various endo/exogenous stimuli to better biomimic the endogenous extracellular matrix for the engineering of cells and tissues. Light irradiation owns a high spatial-temporal resolution, complete biorthogonal reactivity, and fine-tunability and can thus induce physiochemical reactions within the matrix of photoresponsive hydrogels with good precision, efficiency, and safety. Both gel structure (e.g., geometry, porosity, and dimension) and performance (like conductivity and thermogenic or mechanical properties) can hence be programmed on-demand to yield the biochemical and biophysical signals regulating the morphology, growth, motility, and phenotype of engineered cells and tissues. Here we summarize the strategies and mechanisms for encoding light-reactivity into a hydrogel and demonstrate how fantastically such responsive gels change their structure and properties with light irradiation as desired and thus improve their applications in tissue engineering including cargo delivery, dynamic three-dimensional cell culture, and tissue repair and regeneration, aiming to provide a basis for more and better translation of photoresponsive hydrogels in the clinic.

Versatile preparation of jellyfish-inspired color transition hydrogels via polymerization induced supramolecular geletion (PISG)

Supramolecular hydrogels based on host–guest interactions constitute a class of intriguing soft matter and have attracted great attention due to their unique properties, etc. In this study, we successfully synthesized 4-methylene-7-diethylaminocoumarin methacrylate (DEACMMA) monomer and carried out reversible addition-fragmentation chain transfer (RAFT) polymerization using methylated β-cyclodextrin via a host-guest encapsulation mechanism. This process led to the formation of ternary copolymer hydrogel supramolecular photoresponsive hydrogels through polymerization induced supramolecular gelation (PISG). The encapsulation of coumarin monomers by methylated cyclodextrins was confirmed using 2D ROESY NMR and fluorescence spectroscopy. We have carefully analyzed the microstructure of these supramolecular hydrogels by rheological profiles and scanning electron microscopy (SEM). Stimulated by UV light, the copolymers transition from non-luminescence to a bright fluorescent blue color, which is reminiscent of the self-transforming colors observed in jellyfish. The development of photostimuli-responsive hydrogels based on methylated β-cyclodextrin-coated coumarin esters opens new avenues in the fields of smart materials and clinical medicine.

Photoresponsive Smart Hydrogels and Their Versatile Applications: A Review

Stimuli responsive hydrogels are emerging as smart materials due to their tunable chemical and physical properties in response to various stimuli like pH, temperature, chemicals, pressure, electrical or light. Photoresponsive hydrogels are more attractive for versatile applications as their properties can be manipulated via contact free fine tuning of wavelength and intensity of light. If designed properly photoresponsive hydrogels could also have inherent biocompatibility. Their smart responsiveness along with biocompatibility have made them suitable for applications in versatile fields starting from drug delivery, cell-culture to surface modification and soft-robotics. In this review article, basic mechanisms responsible for photo-responsiveness in hydrogels along with their potential applications are discussed.

Cationic Azobenzenes as Light-Responsive Crosslinkers for Alginate-Based Supramolecular Hydrogels.

Azobenzene photoswitches are fundamental components in contemporary approaches aimed at light-driven control of intelligent materials. Significant endeavors are directed towards enhancing the light-triggered reactivity of azobenzenes for such applications and obtaining water-soluble molecules able to act as crosslinkers in a hydrogel. Here, we report the rational design and the synthesis of azobenzene/alginate photoresponsive hydrogels endowed with fast reversible sol-gel transition. We started with the synthesis of three cationic azobenzenes (AZOs A, B, and C) and then incorporated them in sodium alginate (SA) to obtain photoresponsive supramolecular hydrogels (SMHGs). The photoresponsive properties of the azobenzenes were investigated by UV-Vis and 1H NMR spectroscopy. Upon irradiation with 365 nm UV light, the azobenzenes demonstrated efficient trans-to-cis isomerization, with complete isomerization occurring within seconds. The return to the trans form took several hours, with AZO C exhibiting the fastest return, possibly due to higher trans isomer stability. In the photoresponsive SMHGs, the minimum gelation concentration (MGC) of azobenzenes was determined for different compositions, indicating that small amounts of azobenzenes could induce gel formation, particularly in 5 wt% SA. Upon exposure to 365 nm UV light, the SMHGs exhibited reversible gel-sol transitions, underscoring their photoresponsive nature. This research offers valuable insights into the synthesis and photoresponsive properties of cationic, water-soluble azobenzenes, as well as their potential application in the development of photoresponsive hydrogels.

A photoresponsive recombinant human amelogenin-loaded hyaluronic acid hydrogel promotes bone regeneration.

In order to evaluate the effect of methacrylated hyaluronic acid (HAMA) hydrogels containing the recombinant human amelogenin (rhAm) invitro and invivo. The ultimate goal in treating periodontal disease is to control inflammation and achieve regeneration of periodontal tissues. In recent years, methacrylated hyaluronic acid (HAMA) containing recombinant human amyloid protein (rhAm) has been widely used as a new type of biomaterial in tissue engineering and regenerative medicine. However, there is a lack of comprehensive research on the periodontal regeneration effects of this hydrogel. This experiment aims to explore the application of photoresponsive recombinant human amelogenin-loaded hyaluronic acid hydrogel for periodontal tissue regeneration and provide valuable insights into its potential use in this field. The effects of rhAm-HAMA hydrogel on the proliferation of human periodontal ligament cells (hPDLCs) were assessed using the CCK-8 kit. The osteogenic differentiation of hPDLCs was evaluated through ALP staining and real-time PCR. Calvarial parietal defects were created in 4-week-old Sprague Dawley rats and implanted with deproteinized bovine bone matrix in different treatment groups. The animals were euthanized after 4 and 8 weeks of healing. The bone volume of the defect was observed by micro-CT and histological analysis. Stimulating hPDLCs with rhAm-HAMA hydrogel did not significantly affect their proliferation (p > .05). ALP staining and real-time PCR results demonstrated that the rhAm-HAMA group exhibited a significant upregulation of osteoclastic gene expression (p < .05). Micro-CT results revealed a significant increase in mineralized tissue volume fraction (MTV/TV%), trabecular bone number (Tb.N), and mineralized tissue density (MTD) of the bone defect area in the rhAm-HAMA group compared to the other groups (p < .05). The results of hematoxylin and eosin staining and Masson staining at 8 weeks post-surgery further supported the results of the micro-CT. The results of this study indicate that rhAm-HAMA hydrogel could effectively promote the osteogenic differentiation of hPDLCs and stabilize bone substitutes in the defects that enhance the bone regeneration invivo.

Advances and Trends of Photoresponsive Hydrogels for Bone Tissue Engineering.

The development of static hydrogels as an optimal choice for bone tissue engineering (BTE) remains a difficult challenge primarily due to the intricate nature of bone healing processes, continuous physiological functions, and pathological changes. Hence, there is an urgent need to exploit smart hydrogels with programmable properties that can effectively enhance bone regeneration. Increasing evidence suggests that photoresponsive hydrogels are promising bioscaffolds for BTE due to their advantages such as controlled drug release, cell fate modulation, and the photothermal effect. Here, we review the current advances in photoresponsive hydrogels. The mechanism of photoresponsiveness and its advanced applications in bone repair are also elucidated. Future research would focus on the development of more efficient, safer, and smarter photoresponsive hydrogels for BTE. This review is aimed at offering comprehensive guidance on the trends of photoresponsive hydrogels and shedding light on their potential clinical application in BTE.

Construction of gelatin/alginate hydrogels doped hemicyanine derivatives for photodynamic antibacterial application

Hydrogel systems based on natural polymer materials have provided alternative opportunities for preparing antimicrobial dressings. A composite antibacterial hydrogel system containing gelatin (Gel), alginate (Alg) and hemicyanine derivatives with different chain lengths (C3, C6 and C10) was constructed. The composite hydrogels have excellent swelling ability and low degradability due to the classical three-dimensional network structure. Because of the photosensitization ability of C3, C6 and C10, hydrogels containing these molecules can also effectively produce reactive oxygen species (ROS) under light. Importantly, the hydrogel containing C3 molecules that have higher spatial extension structure and shorter alkyl chain than C6 and C10 shows better photo-responsive antibacterial effect against drug-resistant Escherichia coli. The bacterial killing activity of the composite hydrogel system could be regulated by changing the alkyl chain length of the photosensitizers. This effective and photo-responsive composite hydrogel system is expected to be used for bacteria-infected wound repair and promoting wound healing.

Cocktail Cell-Reprogrammed Hydrogel Microspheres Achieving Scarless Hair Follicle Regeneration.

The scar repair inevitably causes damage of skin function and loss of skin appendages such as hair follicles (HF). It is of great challenge in wound repair that how to intervene in scar formation while simultaneously remodeling HF niche and inducing in situ HF regeneration. Here, chemical reprogramming techniques are used to identify a clinically chemical cocktail (Tideglusib and Tamibarotene) that can drive fibroblasts toward dermal papilla cell (DPC) fate. Considering the advantage of biomaterials in tissue repair and their regulation in cell behavior that may contributes to cellular reprogramming, the artificial HF seeding (AHFS) hydrogel microspheres, inspired by the natural processes of "seeding and harvest", are constructed via using a combination of liposome nanoparticle drug delivery system, photoresponsive hydrogel shell, positively charged polyamide modification, microfluidic and photocrosslinking techniques. The identified chemical cocktail is as the core nucleus of AHFS. In vitro and in vivo studies show that AHFS can regulate fibroblast fate, induce fibroblast-to-DPC reprogramming by activating the PI3K/AKT pathway, finally promoting wound healing and in situ HF regeneration while inhibiting scar formation in a two-pronged translational approach. In conclusion, AHFS provides a new and effective strategy for functional repair of skin wounds.

Photoresponsive hydrogel friction.

Photoresponsive hydrogels are an emerging class of stimuli-responsive materials that exhibit changes in physical or chemical properties in response to light. Previous investigations have leveraged photothermal mechanisms to achieve reversible changes in hydrogel friction, although few have focused on photochemical means. To date, the tribological properties of photoswitchable hydrogels (e.g., friction and lubrication) have remained underexplored. In this work, we incorporated photoresponsive methoxy-spiropyran-methacrylate monomers (methoxy-SP-MA) into a hydrogel network to form a copolymerized system of poly(N-isopropylacrylamide-co-2-acrylamido-2-methylpropane sulfonic acid-co-methoxy-spiropyran-methacrylate) (p(NIPAAm-co-AMPS-co-SP)). We demonstrated repeatable photoresponsive changes to swelling, friction, and stiffness over three light cycles. Our findings suggest that volume changes driven by the decreased hydrophilicity of the methoxy-SP-MA upon light irradiation are responsible for differences in the mechanical and tribological properties of our photoresponsive hydrogels. Our results could inform future designs of photoswitchable hydrogels for applications ranging from biomedical applications to soft robotics.

A photo-responsive self-healing hydrogel loaded with immunoadjuvants and MoS2 nanosheets for combating post-resection breast cancer recurrence.

Tumor recurrence after surgical resection remains a significant challenge in breast cancer treatment. Immune checkpoint blockade therapy, as a promising alternative therapy, faces limitations in combating tumor recurrence due to the low immune response rate. In this study, we developed an implantable photo-responsive self-healing hydrogel loaded with MoS2 nanosheets and the immunoadjuvant R837 (PVA-MoS2-R837, PMR hydrogel) for in situ generation of tumor-associated antigens at the post-surgical site of the primary tumor, enabling sustained and effective activation of the immune response. This PMR hydrogel exhibited potential for near-infrared (NIR) light response, tissue adhesion, self-healing, and sustained adjuvant release. When implanted at the site after tumor resection, NIR irradiation triggered a photothermal effect, resulting in the ablation of residual cancer cells. The in situ-generated tumor-associated antigens promoted dendritic cell (DC) maturation. In a mouse model, PMR hydrogel-mediated photothermal therapy combined with immune checkpoint blockade effectively inhibited the recurrence of resected tumors, providing new insights for combating post-resection breast cancer recurrence.

Photo-responsive hydrogels based on a ruthenium complex: synthesis and degradation.

We report the synthesis of a photo responsive metallo-hydrogel based on a ruthenium(II) complex as a functional cross-linker. This metal complex contains reactive 4AAMP (= 4-(acrylamidomethyl)pyridine) ligands, which can be cleaved by light-induced ligand substitution. Ru[(bpy)2(4AAMP)2] cross-links 4-arm-PEG-SH macromonomers by thia-Michael-addition to the photocleavable 4AAMP ligand for the preparation of the hydrogel. Irradiation with green light at 529 nm leads to photodegradation of the metallo-hydrogel due to the ligand dissociation, which can be adjusted by adjusting the Ru[(bpy)2(4AAMP)2] concentration. The ligand substitution forming [Ru(bpy)2(L)2]2+ (L = H2O and CH3CN) can be monitored by 1H NMR spectroscopy and UV-visible absorption. The control of degradation by light irradiation plays a significant role in modulating the elasticity and stiffness of the light sensitive metallo-hydrogel network. The photo-responsive hydrogel is a viable substrate for cell cultures.

Anti-swelling and photoresponsive MXene-based polyampholyte hydrogel sensors for underwater positioning and urban waterlogging pre-warning

Based on the excellent anti-swelling behavior of the polyampholyte hydrogel, a monitoring system is constructed for underwater communication and urban waterlogging pre-warning.

Research on advanced photoresponsive azobenzene hydrogels with push-pull electronic effects: a breakthrough in photoswitchable adhesive technologies.

Smart materials that adapt to various stimuli, such as light, hold immense potential across many fields. Photoresponsive molecules like azobenzenes, which undergo E-Z photoisomerization when exposed to light, are particularly valuable for applications in smart coatings, light-controlled adhesives, and photoresists in semiconductors and integrated circuits. Despite advances in using azobenzene moieties for stimuli-responsive adhesives, the role of push-pull electronic effects in regulating reversible adhesion remains largely unexplored. In this study, we investigate for the first time photo-controlled hydrogel adhesives of azobenzene with different push-pull electronic groups. We synthesized the monomers 4-methoxyazobenzene acrylate (ABOMe), azobenzene acrylate (ABH), and 4-nitroazobenzene acrylate (ABNO2), and examined their effects on reversible adhesion properties. By incorporating these azobenzene monomers into acrylamide, dialdehyde-functionalized poly(ethylene glycol), and [3-(methacryloylamino)propyl]-trimethylammonium chloride, we prepared ABOMe, ABH, and ABNO2 ionic hydrogels. Our research findings demonstrate that only the ABOMe ionic hydrogel exhibits reversible adhesion. This is due to its distinct transition state mechanism compared to ABH and ABNO2, which enables efficient E-Z photoisomerization and drives its reversible adhesion properties. Notably, the ABOMe ionic hydrogel reveals an outstanding skin adhesion strength of 360.7 ± 10.1 kPa, surpassing values reported in current literature. This exceptional adhesion is attributed to Schiff base reactions, monopole-quadrupole interactions, π-π interactions, and hydrogen bonding with skin amino acids. Additionally, the ABOMe hydrogel exhibits excellent reversible self-healing capabilities, significantly enhancing its potential for injectable medical applications. This research underscores the importance of integrating multifunctional properties into a single system, opening new possibilities for innovative and durable adhesive materials.

Exploration of an Organic Mixed-Ion Electronic Conductor by a Peptide-Appended Naphthalene Diimide-Based Photoresponsive Hydrogel

Exploration of an Organic Mixed-Ion Electronic Conductor by a Peptide-Appended Naphthalene Diimide-Based Photoresponsive Hydrogel

Photo-crosslinked composite hydrogels with silver-deposited polymeric carbon nitride for boosting antibacterial activity

Rational design of antibacterial hydrogels is an important link to promote the multi-scenario application of this promising soft material. Herein, acrylamide and sodium alginate were selected as mixed monomers, silver-deposited polymeric carbon nitride nanosheets were used as a photoinitiator, pre-gelation was achieved under UV irradiation, and then a composite hydrogel was obtained through calcium ion crosslinking. The composite hydrogels exhibit good mechanical stability, structural stability in water and degradability under simulated physiological conditions. The composite hydrogels have the activity of killing Escherichia coli with or without light. The visible light response and surface plasmon resonance effect of the silver-deposited polymeric carbon nitride boosted the photocatalytic antibacterial activity of the composite hydrogels, and the bactericidal rate of the optimal sample reached 95.5% after 120 min of visible light irradiation. This work provides a constructive and green roadmap for the design of composite dual-network photoresponsive antibacterial hydrogels.