Photonic Fiber Research Articles

Two-core photonic quasicrystal fiber - surface plasmon resonance (PQF-SPR) methane sensor comprising the ZnO/Au composite film: design and FEM simulation

A photonic quasicrystal fiber - surface plasmon resonance (PQF-SPR) methane sensor made up of the eight-fold photonic quasicrystal fiber has been designed and analyzed. The PQF is used to construct the double-core D-type structure with air holes forming a hole groove on the D-type surface. The grooves are plated with ZnO and Au films successively, following the deposition of a methane-sensitive film containing Cryptophane-E. The effects of the air hole diameter, materials, and relative thickness of the composite film on the sensing properties are studied by finite element simulation. The results show that the wavelength sensitivity of the sensor with the ZnO-Au and TiO2-Au composite film with the same thickness is significantly higher than that with a single gold film coating in the methane concentration range of 0%–3.5%, confirming that the composite film enhances the SPR effect and improves the sensing properties. The ZnO-Au composite film has the best properties such as maximum and average wavelength sensitivities of 64 nm/% and 40.24 nm/%, respectively. The performance of this sensor is notably superior to that of comparable methane sensors previously documented.

High-sensitivity lossy mode resonance sensor by deposition of perovskite nanofilms on the eccentric core quasi D-shaped photonic quasi-crystal fiber

High-sensitivity lossy mode resonance sensor by deposition of perovskite nanofilms on the eccentric core quasi D-shaped photonic quasi-crystal fiber

A Novel High Birefringence Single Elliptic Photonic Quasicrystal Fiber

This A novel single elliptical photonic quasi-crystal fiber (PQF) structure based on ZrF4-BaF2-LaF3-AlF3-NaF (ZBLAN) is proposed. There is a single elliptical air hole at the fiber core and a ten-fold Person-type quasi-crystal structure distributed in the outer layer. The birefringence and confinement loss (CL) of the PQF are numerically proposed in short-wavelength infrared region (SWIR) based on finite element method. The high birefringence is achieved thanks to a single ellipse near the fiber core breaking the symmetry of the structure. Fluoride materials ZBLAN have lower CL in SWIR than traditional quartz glass. The birefringence of this novel PQF can be maintained above 10-2, which will have great potential in optical devices.

Chirped grating for TE-five/TM-three reflective distribution feature

This research expounds on a novel reflective chirped grating, characterized by its differentiated functionality under various polarization modes. Under perpendicular incidence, this intricately grating produces a quintuple-channel diffraction output of the 0th, ±1st, and ±2nd orders in transverse electric (TE) polarization and a triple-channel diffraction output of the 0th and ±1st orders in transverse magnetic (TM) polarization. Both polarization modes exhibit excellent overall diffraction efficiency and uniformity. At an incident wavelength of 1550 nm, the diffraction efficiencies for the 0th, ±1st, and ±2nd orders under TE polarization are 20.16%, 19.27%, and 20.25%, respectively. Simultaneously, under TM polarization, the efficiencies for the 0th and ±1st orders are 31.79% and 31.57%, respectively. Grating parameters were meticulously derived using the finite element method (FEM) and subsequently corroborated through rigorous coupled-wave analysis (RCWA) to ensure superior grating accuracy. The study also exhaustively analyzes the manufacturing tolerances and robustness of the grating, affirming its practical applicability and effectiveness in practical applications. The dual-function grating splitter proposed in this paper enables the implementation of multiple functionalities within simple setups, suitable for applications requiring varied beam splitting. As photonic systems and fiber technology evolve, the potential applications of dual-function reflective splitters in these fields are increasingly highlighted.

Axion topology in photonic crystal domain walls

Axion insulators are 3D magnetic topological insulators supporting hinge states and quantized magnetoelectric effects, recently proposed for detecting dark-matter axionic particles via their axionic excitations. Beyond theoretical interest, obtaining a photonic counterpart of axion insulators offers potential for advancing magnetically-tunable photonic devices and axion haloscopes based on axion-photon conversion. This work proposes an axionic 3D phase within a photonic setup. By building inversion-symmetric domain-walls in gyrotropic photonic crystals, we bind chiral modes on inversion-related hinges, ultimately leading to the realization of an axionic channel of light. These states propagate embedded in a 3D structure, thus protected from radiation in the continuum. Employing a small external gyromagnetic bias, we transition across different axionic mode configurations, enabling effective topological switching of chiral photonic fibers. While demonstrating the possibility of realizing axion photonic crystals within state-of-the-art gyrotropic setups, we propose a general scheme for rendering axion topology at domain walls of Weyl semimetals.

Exploring Two‐Exciton Steerability and Nonlocality Dynamics in Two Open Microcavities Coupled by an Optical Fiber

AbstractThis work will explore the generations of quantum nonlocalities (as entanglement, Bellnonlocality, and steerability) for two quantum wells (excitons) in dissipative microcavities containing a linear optical medium. An optical fiber links the microcavities. The generated two‐exciton nonlocalities are explored by using Bell inequality, steering inequality, and entanglement of formation. For initial correlated and uncorrelated states, the ability of the excitation–photon–fiber interactions to produce new generation and robustness of the two‐exciton nonlocality is investigated under the effects of the couplings of the exciton–photon and fiber–photon interactions as well as of the dissipations and the optical susceptibility. It is found that increasing the optical susceptibility enhances the regularity and amplitudes, reduces the frequencies of two‐exciton nonlocality dynamics, and supports dissipation degradations. For the initial uncorrelated state, decreasing the difference between the exciton–photon and fiber–photon couplings enhances the generations of the nonlocalities. For the initial correlated state, increasing the exciton–photon and fiber–photon couplings enhances the nonlocality conservation. For open microcavites, increasing the exciton–photon and fiber–photon couplings and the difference between them supports the nonlocality degradations resulting from the external environment dissipations.

Improving correlation based super-resolution microscopy images through image fusion by self-supervised deep learning.

Super-resolution imaging is a powerful tool in modern biological research, allowing for the optical observation of subcellular structures with great detail. In this paper, we present a deep learning approach for image fusion of intensity and super-resolution optical fluctuation imaging (SOFI) microscopy images. We construct a network that can successfully combine the advantages of these two imaging methods, producing a fused image with a resolution comparable to that of SOFI and an SNR comparable to that of the intensity image. We also demonstrate the effectiveness of our approach experimentally, specifically on cell samples where microtubules were stained with ATTO647N and imaged using a confocal microscope with a single photon fiber bundle camera, allowing for the simultaneous acquisition of an image scanning microscopy (ISM) image and a SOFISM (ISM and SOFI) image. Our network is designed as a self-supervised network and shows the ability to train on a single pair of images and to generalize to other image pairs without the need for additional training. Our approach offers a flexible and efficient way to combine the strengths of correlation based imaging techniques along with traditional intensity based microscopy, and can be readily applied to other fluctuation based imaging modalities.

Ge-Se-Te based penrose photonic quasi-crystal fiber for SCG covering 2–21 μm MIR regime

This work proposes a Penrose-based photonic quasi-crystal fiber (PQF) composed of Arsenic-free, non-toxic chalcogenide glass for Supercontinuum (SC) generation consisting of quasi-crystal lattice of air holes having eight-fold rotational symmetry. Following optimizing the structural parameters, the proposed PQF offers zero dispersion wavelength (ZDW) at around 3.8 μm, an effective mode area of 30 μm2, and a respective high nonlinearity of 824 W−1Km−1 at 2 μm wavelength. By injecting a secant hyperbolic optical pulse having a central wavelength of 4 μm with 20 kW peak power and pulse width of 50 fs, a broadband SC of 2–21 μm is generated, which mostly covers the transparency range of the proposed material as well as Mid-IR regime. To the best of our understanding, this particular type of PQF for broadband SC generation has been proposed for the first time, serving as the novelty factor. Apart from novelty, the wide-band SC assists the proposed PQF in becoming a better counterpart for applications like optical coherence tomography (OCT), frequency metrology, and other Mid-IR applications.

Low loss polycrystalline SiGe core fibers for nonlinear photonics.

Polycrystalline silicon-germanium (SiGe) core fibers offer great potential as flexible platforms for microscale optoelectronic and nonlinear optical devices. Compared to silicon (Si) core fibers, the SiGe material provides the potential for higher nonlinear coefficients, extended mid-infrared wavelength coverage, and a means to tune the bandgap and index of refraction by varying the Ge composition. Here, SiGe core fibers (10 at% Ge) were fabricated using the molten core drawing method, followed by CO2 laser irradiation to improve the homogeneity of the core. The transmission properties of the fibers were further optimized using a fiber tapering method to tailor the core diameter and re-grow the crystal grains. The resulting tapered SiGe fiber exhibited an average linear loss of ∼3 dB cm-1 across the wavelength range 1.5 - 2.5 µm, allowing for nonlinear optical characterization of this new fiber type. Measurements of the nonlinear figure of merit demonstrate the potential for higher nonlinear performance compared to the pure Si core fibers, particularly for wavelengths >2 µm, indicating that the SiGe fiber platform could open up new opportunities for mid-infrared nonlinear photonics.

Silicon Core Fibers for Nonlinear Photonics: Applications and Emerging Trends

Silicon Core Fibers for Nonlinear Photonics: Applications and Emerging Trends

Pathogen inactivation mechanism with application in implantology

At the present time, a special attention is given to the large-scale using of implant treatments. Modern implants have a good rate of success, reliability and longevity, they are minimally invasive, delicate and resistant. Due to the development of some forms of pathogens at the implant-tissue contact, there are situations of poor adhesion of the implant surface to the organic tissue. The application of chemical or surgical methods in such situations are difficult. But in order to solve these phenomena, new techniques are needed to be implemented. That why it is proposed to apply ultraviolet radiation on the optical system (photonic crystals and photonic fiber crystals) of modern implants to treat the infection that can appear on the surface between the implant and the cellular tissue in the process of poor adhesion. These combinations of periodic quartz optical structures are deposited and regularly arranged (set of fibers or spheres) on the implant surface, which can be used as a large volume dispersion of ultraviolet C radiation to treat the infection at the surface between the implant and adhesion tissue. The proposed periodic optical structure contributes considerably to increasing the adhesion of the implant to the cellular tissue, thus stimulating cellular growth between the elements and the implant.

Beam loss detection based on generation of Cherenkov light in optical fibers in the CERN Linear Electron Accelerator for Research

Cherenkov optical beam loss monitors (oBLMs) based on optical fibers are a revolutionary achievement among the monitoring systems in particle accelerators. Due to the nature of the Cherenkov phenomenon and the intrinsic characteristics of optical fibers, the photon production and fiber light transmission need to be studied to deduce the total amount of Cherenkov photons detected by the photosensors attached at the end of the system. Simulations of the Cherenkov oBLM detector system have been implemented using the software with postprocessing considering the light attenuation and capture factors in the optical fiber. In addition, the study includes the longitudinal beam loss localization of the controlled beam losses produced along the CERN Linear Electron Accelerator for Research (CLEAR) test facility line. In this paper, the Cherenkov photon detection by an oBLM installed in the CLEAR facility is simulated, analyzed, and compared with experimental data. Published by the American Physical Society 2024

Photonic quasi-crystal fiber electro-optical modulator

The integration of graphene with optical fiber is considered to be a new interdisciplinary research hotspot for functional fiber. In this paper, an electro-optical modulator based on a six-fold Stampfli-type photonic quasi-crystal fiber (PQF) is theoretically proposed with a sandwiched graphene/hexagonal boron nitride/graphene (Gr/hBN/Gr) film covering all the hole walls. This design exhibits a strong light-graphene interaction with an excellent modulation depth of ∼64 dB mm−1 at 1550 nm by applying an external bias voltage (below 30 V) on both graphene layers. As the Fermi level of the graphene changes with voltage, the fiber shows ‘On’ and ‘Off’ states, serving well as a light-switch. For the modulator performance, the dependence of modulation depth on multiple factors is studied in terms of the layer numbers of graphene and hBN films, the incident wavelength, and the structure parameters. Interestingly, an attenuation peak occurs due to the epsilon-near-zero effect in graphene and shows a linear relationship between the wavelength and the Fermi level. This design provides a guidance for the integration of PQF and graphene, and holds great promise for future all-fiber systems.

Surface plasmon resonance methane sensor based on the D-type photonic quasi-crystal fiber with double-layer films

A high-sensitivity photonic quasi-crystal fiber surface plasmon resonance (PQF-SPR) methane sensor is designed and analyzed. The six-fold Penrose PQF has a D-type structure with two grooves on which TiO2 and Au films are deposited, and methane-sensitive film containing cryptophane-E is coated on the surface of the D-type structure. The characteristics of the sensor are analyzed by the finite element method and the influence of different coating materials (Au-TiO2, Au-MgF2, Au-ITO) on the sensitivity and FOM of the sensor is analyzed and compared. The results show that the PCF-SPR sensor with the dual Au-TiO2 film has better sensing properties. The maximum wavelength sensitivity and average wavelength sensitivity reach 40 nm/% and 34.74 nm/% in the methane concentration range of 0–3.5 % respectively. These properties are significantly better than those of similar sensors reported recently, and the sensor thus has large potential in the development of high-sensitivity and miniaturized methane sensors.

Control of temperature dependent viscosity for manufacturing of Bi-doped active fiber

Bi-activated photonic materials are promising for various applications in high-capacity telecommunication, tunable laser, and advanced bioimaging and sensing. Although various Bi-doped material candidates have been explored, manufacturing of Bi heavily doped fiber with excellent optical activity remains a long-standing challenge. Herein, a novel viscosity evolutional behavior mediated strategy for manufacturing of Bi-doped active fiber with high dopant solubility is proposed. The intrinsic relation among the evolution of Bi, reaction temperature and viscosity of the glass system is established. Importantly, the effective avenue to prevent the undesired deactivation of Bi during fiber drawing by tuning the temperature dependent viscosity evolution is built. By applying the strategy, for the first time we demonstrate the success in fabrication of heavily doped Bi active fiber. Furthermore, the principal fiber amplifier device is constructed and broadband optical signal amplification is realized. Our findings indicate the effectiveness of the proposed temperature dependent viscosity mediated strategy for developing novel photonic active fiber, and they also demonstrate the great potential for application in the next-generation high-capacity telecommunication system.

Photonic Interpenetrating Polymer Network Fibers Comprising Intertwined Solid-State Cholesteric Liquid Crystal and Polyelectrolyte Networks for Sensor Applications.

Uniform-sized photonic interpenetrating polymer network (IPN) fibers comprising intertwined solid-state cholesteric liquid crystal (CLCsolid) and anionic poly(acrylic acid) (PAA) or cationic poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) networks (photonic IPNPAA or IPNPDMAEMA fibers) were developed for sensor applications. IPNPAA or IPNPDMAEMA fibers with a perfect photonic structure were fabricated inside Teflon tube templates without any treatments for realizing a planar orientation in those fibers. The dominant wavelength of the photonic color from a photograph taken with a cellular phone was used to measure the photonic color change. Photonic IPNPAA fibers treated with KOH (IPNKOH fibers) were used for sensing humidity and divalent metal ions. The linear ranges for relative humidity and Ca2+ detection were 21-92% and 0.5-3.5 mM, and their limits of detection (LODs) were 7.86% and 0.07 mM, respectively. The photonic IPNPAA (or IPNPDMAEMA) fiber immobilized with urease (IPNPAA-urease) (or glucose oxidase (IPNPDMAEMA-GOx)) was used for urea (or glucose) biosensor application. The photonic IPNPAA-urease (or IPNPDMAEMA-GOx) fiber was red-shifted in response to urea (or glucose) in the linear range of 10-60 mM (or 2-16 mM) with an LOD of 2.54 mM (or 0.76 mM). These photonic IPN fibers are promising because of their easy fabrication and miniaturization, battery-free device, cost-effectiveness, and visual detection without using sophisticated analytical instruments. The developed photonic IPN fibers provide new possibilities for the widespread use of photonic sensors in cutting-edge wearable technology and beyond.

Anion Hybridization for Enhanced Broadband Optical Response in Bi‐Doped Photonic Glass and Fiber

AbstractGiven the ever‐increasing demand for transmission capacity in optical fiber communication systems, there is a growing focus on developing active fibers and devices with an optical response across a wider spectrum. Bismuth (Bi)‐doped photonic glasses have attracted significant interest for their exceptional ultra‐broadband optical response, particularly within telecommunication bands. However, developing advanced Bi‐activated materials with robust optical response, high compatibility with commercial transmission systems, and low processing temperature remains a huge challenge. Herein, an anion hybridization strategy is proposed to overcome the aforementioned limitations. The anion hybridization significantly enhances the broadband optical response (≈10 times) of the Bi center following the introduction of fluorine ions, and reduces the transition temperature of the photonic glass (≈200 °C). Moreover, the near‐infrared optical response bandwidth experiences significant broadening, a result attributed to the larger inhomogeneous broadening. Furthermore, successful fabrication of the anion‐hybridized Bi‐activated glass fiber is achieved, demonstrating excellent compatibility with commercial transmission fibers. Additionally, the fabricated fiber exhibits an amplified spontaneous emission and on‐off gain across a broad waveband, further validating its efficacy. These results indicate that anion hybridization offers an effective strategy to optimize the optical and thermal properties of photonic materials to develop novel advanced photonic devices.

Te Cluster Engineering for Tunable Optical Response

AbstractThe construction of active materials with controllable optical response facilitates the development of advanced photonic devices. However, the achievement of robust active materials with wide wavelength tunable and broadband emission remains a great challenge, mainly due to the fixed energy levels of conventional active dopants and limited inhomogeneous broadening in common hosts. Here, the study proposes that the cluster in the mesoscopic scale of ≈1 nm may break this bottleneck issue and demonstrate a strategy for the management of photon emission by engineering the cluster evolution. The amorphous glass as the host to tailor the characteristic configuration of Te clusters from 1 to 2 nm by control of the topological structures in glass is employed. Impressively, it presents a distinct optical response totally different from the conventional active centers and this enables to construct of active photonic glass with continuously tunable emission from 888 to 1064 nm. More importantly, Te cluster‐activated photonic glass fibers are fabricated and the broadband on‐off gain is successfully achieved. Furthermore, benefiting from the unique tunable emission, novel near‐infrared devices are constructed and their application in imaging is demonstrated. The approach of cluster engineering mediated tunable optical response is believed to bring new opportunities for developing advanced photonic devices.

Demodulation and Vibration Signal Systems for Photonic Fiber Optic Pressure Sensor

The article describes the optical elements of signal demodulation and polling systems from photonic pressure sensors on inclined fiber Bragg gratings, which are often used to measure the refractive index (RI). A new design of a photonic fiber-optic Bragg pressure sensor with an inclined lattice has been developed, which is connected to standard multimode fibers with an inclined Bragg lattice connected to a metal diaphragm, which is a deformed inclined cantilever. The light source is polarized using the first polarizer and directed to the photonic crystal fiber in such a way as to excite multimode fibers. In this work, a method was developed for determining the optical elements of the spectral contour length system, which consists of setting the cut-off wavelength and then determining the accompanying refractive index. An experimental study determined the curve of the chain length change in the set. To process random signals, the spatial correlation method is used in combination with an approach to digital images based on the number of lanes and the direction of movement. The experimental results differ from the theoretical ones by about 4%. The developed correlation method reflects frequency as well as randomness, it is used in the photographic process together with the image correction given in this document.

Fully Connected Feedforward Neural Network for the Prediction of Amorphous Silicon Grating Couplers Efficiency

Photonic circuits are an enabling technology for the development of novel solutions in different fields such as healthcare, quantum computing, neural networks, communications, and manufacturing. Interconnections between devices and systems require low-loss light coupling strategies. Grating couplers are a promising solution to couple light between photonic circuits and optical fibres due to their off-plane coupling capabilities. Hydrogenated amorphous silicon (a-Si:H), which can be deposited by PECVD over a substrate of silica or glass, is a suitable low-cost solution for the production of such light coupling devices. In this work we developed, trained and tested a fully connected feedforward neural network for coupling efficiency prediction in a-Si:H grating couplers. The light coupling gratings were simulated by twodimensional finite-difference time-domain (FDTD) analysis and field distributions were analysed with the Finite Element Method (FEM). Simulated gratings include non-apodized, linear and quadratic refractive index variation designs featuring full or partial etching, operating at 1550 nm. Not featuring any type of bottom reflector, the couplers exhibit coupling efficiencies up to about 40 % (~ -4 dB). The neural network multiclass grating coupler efficiency classifier was trained with over 3000 simulation results, reaching an accuracy over 85%, for coupling efficiencies between 0 and 30%+.