Photolysis Products Research Articles

Development and Application of a New QuEChERS Method Coupled with UPLC-QTOF-MS/MS for Analysis of Tiafenacil and Its Photolysis Products in Water.

This research centered on the novel pyrimidinedione herbicide, tiafenacil. Residues of tiafenacil and its three photolysis products (PP1 to PP3) in water were analyzed using advanced QuEChERS and UPLC-QTOF-MS/MS techniques, reaching a low limit of quantitation (LOQ) of 10 μg/L. Calibration curves exhibited a high degree of linearity (R2 ≥ 0.993) over a concentration range of 0.01 to 1.00 mg/L. Method validation demonstrated high precision, with intraday relative standard deviation RSDr ≤7.9% and interday RSDR ≤ 6.1%, along with high accuracy (recoveries from 94.4% to 105.0%). Using density functional theory (DFT) at the B3LYP/6-311g (d) level, we calculated the electronic properties of tiafenacil and its PPs (PP1 to PP3). Additionally, frontier molecular orbital (FMO) and fukui function analyses were conducted to explore HOMO-LUMO energies, determine energy band gaps for these substances, and predict reactive sites for their electrophilic, nucleophilic, and radical reactions. Significantly, ecotoxicity assessment, including ECOSAR predictions and acute toxicity tests, revealed that the PPs exhibited higher ecotoxicity to aquatic organisms than tiafenacil. Field experiments showed a half-life of 18.9 days for tiafenacil in water, fitting a first-order kinetic model (R2 = 0.999), with a degradation of 41.5% after 14 days and approximately 89.2% after 60 days. This study significantly advances our understanding of tiafenacil's environmental fate, evaluates its associated risks, and offers valuable insights for its responsible application.

Sea foam contains hemoglycin from cosmic dust.

In-falling cosmic dust has left evidence of meteoritic polymer amide in stromatolites, both fossil and modern. In search of evidence for continued present day in-fall, sea foam was collected from two beaches in Rhode Island and subjected to Folch extraction to concentrate amphiphilic components in a chloroform water-methanol interphase layer. Hemoglycin polymer amide molecules previously characterized by MALDI mass spectrometry in meteorites and stromatolites were identified in sea foam either directly, or via their fragmentation patterns. Residual isotope enrichment pointed to an extra-terrestrial origin. The unique resiliency of sea foam may be due to the formation of extended hemoglycin lattices that stabilize its closed-cell structure and its lightness can potentially be explained by photolytic hydrogen production.

Substantiation and Prospects of the Application of Chlorine Photosensitizer Photolysis Products for Antimicrobial Therapy in Clinical Practice

Substantiation and Prospects of the Application of Chlorine Photosensitizer Photolysis Products for Antimicrobial Therapy in Clinical Practice

Photolysis of p-phenylenediamine rubber antioxidants in aqueous environment: Kinetics, pathways and their photo-induced toxicity

The widespread use of rubber antioxidants, especially p-phenylenediamines (PPDs), has raised increasing concerns about their risk assessment. However, there is a notable lack of research on their transformation products (TPs). Photolysis, influenced by active components, plays a significant role in the environmental fates of PPDs. This study investigated four emerging PPDs (N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD), N, N′-diphenyl-p-phenylenediamine (DPPD), N-isopropyl-N′-phenyl-p-phenylenediamine (IPPD), and N-cyclohexyl-N′-phenyl-p-phenylenediamine (CPPD)) through a combination of experiments (photolysis kinetics, quenching experiments, acute toxicity test to Vibrio Fischeri (V. fischeri) and identification of photolytic products) and theoretical calculations. The results revealed different pathways for indirect photolysis mediated by the hydroxyl radicals (•OH) and singlet oxygen (1O2) of DPPD and IPPD under simulated sunlight irradiation. The effects of dissolved organic matter (DOM) and fulvic acid (FA) on the rates of photolysis of PPDs highlighted the complex interactions among the molecular structure, light absorption properties, and environmental variables. Quenching for reactive oxygen species (ROS) reduced photo-induced toxicity, whereas the addition of DOM and FA increased it, suggesting the crucial role of ROS in the formation of more toxic photolytic products. The study of photolysis pathways and the evaluation of the health risks provide a comprehensive understanding of the environmental effects of these pollutants.

Novel Chemical Routes for Carbon Dioxide and Methane Production from Lignin Photodegradation: The Role of Environmental Free Radicals.

Sunlight irradiation significantly mediates plant litter's carbon dynamics and volatile carbon release in semi-arid and arid ecosystems. In this process, carbon loss is controlled by lignin, but the mechanisms of production of CO2 and CH4 during lignin photolysis are ambiguous. In this study, the photomineralization of plant litter and the lignocellulosic component collectively indicate that lignin is a major source of CO2 and CH4 emissions. Characterization and free radical analysis reveal that the production of CO2 is due to the oxidation and ring-opening reaction of the coniferyl alcohol unit, with the subsequent decarboxylation of carboxylic acid as an oxidation product. This reaction involves o-quinone formation by the reactions between O2, superoxide radical (O2·-), and persistent free radicals (PFRs)-bearing lignin. Of this, O2·- contributes to 43.2% of the photogenerated CO2, as a new pathway, derived from the electron transfer from PFRs to O2. Interestingly, photoinduced demethylation of the dimethoxybenzene-type compounds as the photolysis products of lignin results in a never-before-reported CH4 formation chemical route independent of that of O2. This mechanistic insight into the role of lignin in volatile carbon production from the irradiative plant litter will contribute to a deeper understanding of carbon balance in water-limited ecosystems.

Comparative toxic effect of tire wear particle-derived compounds 6PPD and 6PPD-quinone to Chlorella vulgaris

N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD), a widely used antioxidant in rubber products, and its corresponding ozone photolysis product N-(1,3-Dimethylbutyl)-N′-phenyl-p-phenylenediamine-quinone (6PPD-Q), have raised public concerns due to their environmental toxicity. However, there is an existing knowledge gap on the toxicity of 6PPD and 6PPD-Q to aquatic plants. A model aquatic plant, Chlorella vulgaris (C. vulgaris), was subjected to 6PPD and 6PPD-Q at concentrations of 50, 100, 200, and 400 μg/L to investigate their effects on plant growth, photosynthetic, antioxidant system, and metabolic behavior. The results showed that 6PPD-Q enhanced the photosynthetic efficiency of C. vulgaris, promoting growth of C. vulgaris at low concentrations (50, 100, and 200 μg/L) while inhibiting growth at high concentration (400 μg/L). 6PPD-Q induced more oxidative stress than 6PPD, disrupting cell permeability and mitochondrial membrane potential stability. C. vulgaris responded to contaminant-induced oxidative stress by altering antioxidant enzyme activities and active substance levels. Metabolomics further identified fatty acids as the most significantly altered metabolites following exposure to both contaminants. In conclusion, this study compares the toxicity of 6PPD and 6PPD-Q to C. vulgaris, with 6PPD-Q demonstrating higher toxicity. This study provides valuable insight into the risk assessment of tire wear particles (TWPs) derived chemicals in aquatic habitats and plants.

Relationships Between HCl, H2O, Aerosols, and Temperature in the Martian Atmosphere: 2. Quantitative Correlations

AbstractThe detection of hydrogen chloride (HCl) in the atmosphere of Mars was among the primary objectives of the ExoMars Trace Gas Orbiter (TGO) mission. Its discovery using the Atmospheric Chemistry Suite mid‐infrared channel (ACS MIR) showed a distinct seasonality and possible link to dust activity. This paper is part 2 of a study investigating the link between HCl and aerosols by comparing gas measurements made with TGO to dust and water ice opacities measured with the Mars Climate Sounder (MCS). In part 1, we showed, and compared, the seasonal evolution of vertical profiles of HCl, water vapor, temperature, dust opacity, and water ice opacity over the dusty periods around perihelion (solar longitudes 180°–360°) across Mars years 34–36. In part 2, we investigated the quantitative correlations in the vertical distribution between each quantity, as well as ozone. We show that there is a strong positive correlation between HCl and water vapor, which is expected due to fast photochemical production rates for HCl when reacting with water vapor photolysis products. We also show a strong positive correlation between water vapor and temperature, but are unable to show any correlation between temperature and HCl. There are weak correlations between the opacities of dust and water ice, and dust and water vapor, but only very low correlations between dust and HCl. We close with a discussion of possible sources and sinks and that interactions between HCl and water ice are the most likely for both, given the inter‐comparison.

Photochemical transformation of liquid crystal monomers in simulated environmental media: Kinetics, mechanism, toxicity variation and QSAR modeling

Liquid crystal monomers (LCMs) are a new class of emerging pollutants with high octanol-water partition coefficients; however, their transformation behavior and associated risk to environments with high organic matter content has rarely been reported. In this study, we investigated the photodegradation kinetics, mechanism, and toxicity variation of 23 LCMs on leaf wax models (e.g., organic solvents methanol and n-hexane). The order of the photolysis rates of these LCMs were biphenylethyne LCMs > phenylbenzoate LCMs > diphenyl/terphenyl LCMs under simulated sunlight, while the phenylcyclohexane LCMs were resistant to photodegradation. The phenylbenzoate and biphenylethyne LCMs mainly undergo direct photolysis, while the diphenyl/terphenyl LCMs mainly undergo self-sensitized photolysis. The main photolysis pathways are the cleavage of ester bonds for phenylbenzoate LCMs, the addition, oxidation and cleavage of alkynyl groups for biphenylethyne LCMs, and the cleavage/oxidation of chains attached to phenyls and the benzene ring opening for diphenyl/terphenyls LCMs. Most photolysis products remained toxic to aquatic organisms to some degree. Additionally, two quantitative structure-activity relationship models for predicting kobs of LCMs in methanol and n-hexane were developed, and employed to predict kobs of 93 LCMs to fill the kobs data gap in systems mimicking leaf surfaces. These results can be helpful for evaluating the fate and risk of LCMs in environments with high content of organic phase.

Orthogonal Deprotection of Photolabile Protecting Groups and Its Application in Oligosaccharide Synthesis.

We herein report for the first time the inter- and intramolecular orthogonal cleavage of two ortho-nitrobenzyl (NB) analogues. It is shown that the nitroveratryl (NV) group can be photolyzed with high priority when NV and ortho-nitrobenzyl carbonate (oNBC) are used together as the protecting groups of glycans. Notably, the photolytic products could be used directly in the subsequent glycosylation without further purification. With the above-mentioned orthogonal photolabile protecting group strategy in hand, a Mycobacterium tuberculosis tetrasaccharide and a derivative of glucosyl glycerol were rapidly prepared.

Development and validation of stability indicating assay method for mitapivat: Identification of novel hydrolytic, photolytic, and oxidative forced degradation products employing quadrupole-time of flight mass spectrometry.

Mitapivat is a novel, first-in-class orally active pyruvate kinase activator approved by the US Food and Drug Administration in 2022 for the treatment of hemolytic anemia. There is no literature available regarding the identification of degradation impurities of mitapivat. The present study deals with the degradation behavior of mitapivat under various stress conditions such as hydrolytic, photolytic, thermal, and oxidative stress. The multivariate analysis found that the independent variables, that is, molarity, temperature, and time, are interacting with each other to affect the degradation of mitapivat. A specific, accurate, and precise high-performance liquid chromatographic (HPLC) method was developed to separate mitapivat from its degradation products. The separation was achieved on the C-18 column (250mm × 4.6mm × 5µm) using the combination of 0.1% formic acid buffer and acetonitrile in gradient elution profile. The method was validated as per the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use Q2(R2) guideline. LC-electrospray ionization-Quadrupole-time of flight was employed to identify degradation products. A total of seven novel degradation products of mitapivat were identified based on tandem mass spectrometry and accurate mass measurement. In-silico toxicity of mitapivat and its degradation products was qualitatively evaluated by the DEREK toxicity prediction tool.

An eco-friendly first and second derivative synchronous spectrofluorimetry for quantification of florfenicol in presence of its different degradation products. Application to kinetic stability study.

Two rapid, simple, sensitive and selective derivative spectrofluorimetric methods (first and second derivative synchronous spectrofluorimetric (FDSFS and SDSFS) procedures) have been developed for the analysis of florfenicol in the presence of its various degradation products. FDSFS was applied to assay the drug in the presence of its alkaline, oxidative and photolytic degradation products while SDSFS was used to quantify it in the presence of its acidic degradation product. These methods permitted quantification of florfenicol at corresponding λ Em of 288, 287, 279 and 284 nm without interferences from any of its degradation products. Full validation procedures were applied to the suggested method according to International Conference of Harmonization guidelines. Moreover, different degradation kinetic parameters were calculated such as half-life (t 1/2), degradation rate constant (K) and activation energy (E a). Using the analytical eco-scale, green analytical procedure index and analytical greenness metric approach AGREE as greenness assessment tools, the proposed method was found to be environmentally friendly.

High-Resolution Imaging Study on Photodissociation of OCS+ [A2ΠΩ=1/2,3/2 (ν1 0 ν3)

The development of the velocity map ion imaging (VMI) technique has greatly advanced the study of photodissociation dynamics. The high-resolution imaging study of the photodissociation allows for the acquisition of precise and detailed information on the fragments. This information can further provide more insight into the energy partition and potential pathways involved in the photodissociation process. In this study, we report the investigation on the photodissociation of OCS+ via the A2ΠΩ=1/2,3/2 states following the excitation of A2Π (ν1 0 ν3) ← X2Π (0 0 0) by using time-sliced VMI techniques in the ultraviolet region. Our investigation revealed significant mode-dependent recoil anisotropies and branching ratios of two product channels for both Ω = 1/2 and Ω = 3/2. The photolysis products also exhibited dramatic deviation in angular distributions and generally comparable kinetic energy distributions following the excitation to the same vibrational modes of A2ΠΩ states with two separate spin-orbit components. According to the observation in this study and previously reported photodissociation mechanisms of the OCS+ cations, the decay from the A2Π3/2 state was more likely via the internal conversion to high rovibrational states of the X2Π state, in comparison to the A2Π1/2 state.

Boosting photolytic hydrogen production over N-rich BaTaO2N

BaTaO2N with an absorption edge over 600 nm demonstrates excellent hydrogen evolution activity under visible light irradiation. In this work, we synthesized N-rich BaTaO2N by adjusting the ratio of Ta2O5 and TaCl5, leading to a subsequent impact on its photocatalytic hydrogen production activity. The results demonstrate the successful synthesis of nitrogen-rich BaTaO2N using the flux method, yielding an observed apparent quantum efficiency (AQE) of 2.27 % at a wavelength of 420 nm. The increased rate of hydrogen evolution in photocatalytic water splitting is primarily due to the enhanced efficiency of separating photogenerated carriers resulting from nitrogen enrichment.

Simultaneous determination of folic acid photolysis products and oxidized guanine derivatives in plasma by liquid chromatography-tandem mass spectrometry.

Folic acid (FA) is easily photodegraded to yield 6-formylpterin and pterin-6-carboxylic acid, which can generate reactive oxygen species and result in the formation of oxidized guanine derivatives such as 8-hydroxy-2'-deoxyguanosine and 8-hydroxy-guanosine.In this study, we developed a simple, rapid, and sensitive liquid chromatography-tandem mass spectrometry strategy for the simultaneous determination of FA photolysis products and oxidized guanine derivatives in plasma samples. Chromatographic separation was performed on a Waters HSS T3 column (2.1 × 100mm, 5.0μm) with gradient elution at a flow rate of 0.25mL/min. Plasma samples were first pretreated with 1% formic acid, followed by protein precipitation with methanol. The developed method showed good linear relationships between 1 and 2000ng/mL (r2>0.99). The intra- and inter-day precisions ranged from 2.6% to 7.5% and from 2.5% to 6.5%, respectively. Recoveries of the analytes were between 75.4% and 112.4% with the relative standard deviation<9.1%. Finally, the method was applied to quantify FA photolysis products and oxidized guanine derivatives in rats with light and non-light conditions.

Photochemical Degradation of the New Nicotine Pesticide Acetamiprid in Water.

Acetamiprid is a novel nicotinic pesticide widely used in modern agriculture because of its low toxicity and specific biological target properties. The objective of this study was to understand the photolysis pattern of acetamiprid in the water column and elucidate its degradation products and mechanism. It was observed that acetamiprid exhibited different photolysis rates under different light source conditions in pure water, with ultraviolet > fluorescence > sunlight; furthermore, its photolysis half-life ranged from 17.3 to 28.6h. In addition, alkaline conditions (pH 9.0) accelerated its photolysis rate, which increased with pH. Using gas chromatography-mass spectrometry, five direct photolysis products generated during the exposure of acetamiprid to pure water were successfully separated and identified. The molecular structure of acetamiprid was further analyzed using density functional theory, and the active photodegradation sites of acetamiprid were predicted. The mechanism of the photolytic transformation of acetamiprid in water was mainly related to hydroxyl substitution and oxidation. Based on these findings, a comprehensive transformation pathway for acetamiprid was proposed.

Synthesis and Reactivity of Tricoordinate Organoberyllium Azides.

A series of terminal mono- and disubstituted beryllium azides of the form [(CAAC)Be(N3)R] (R=CAACH, Dur; CAACH/CAAC=1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-yl/idene, Dur=2,3,5,6-tetramethylphenyl) and [L2Be(N3)2] (L=CAACNH=1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-imine, IiPrMe=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene), respectively, were synthesized and characterized by NMR spectroscopy and X-ray crystallography. Thermolysis and photolysis products of these first examples of tricoordinate azidoberyllium complexes evidence extensive ligand scrambling and the formal insertion of nitrenes into the CAAC-Be bond, generating cyclic alkyl(amino)imine (CAAI) ligands. Furthermore, the reaction with a small N-heterocyclic carbene (NHC) leads to unexpected CAAC-NHC ligand exchange, while the reaction with pentaphenylborole yields the first γ-azide adduct of a borole, long postulated to be the first step in the synthesis of 1,2-azaborinines from boroles and azides.

Aquatic photolysis of high-risk fluorinated liquid crystal monomers: Kinetics, toxicity evaluation, and mechanisms

Despite the frequent detection of fluorinated liquid-crystal monomers (FLCMs) in the environment, the level of understanding of their fate, toxicity, and transformation remains insufficient. Herein, we investigated the degradation kinetics and mechanism of an FLCM (4-cyano-3-fluorophenyl 4-ethylbenzoate, CEB-F) under ultraviolet (UV) photolysis in aquatic environment. Our findings demonstrated that the UV photolysis of CEB-F followed first-order kinetics. Photodegradation products were identified using liquid chromatography with mass spectrometry, and detailed reaction pathways were proposed. It is postulated that through the attack of reactive oxygen species, hydroxylation, and CO/C-F bond cleavage, CEB-F gradually degraded into small molecular compounds, releasing fluorine ions. Acute immobilization tests with Daphnia magna (D. magna) revealed significant acute toxicity of CEB-F, with LC50 values ranging from 1.023 to 0.0536 μM over 24 to 96 h, emphasizing the potential high risk of FLCMs in aquatic ecosystems if inadvertently discharged. Interestingly, we found that the toxicity of CEB-F photolysis reaction solutions was effectively reduced. Through catalase and acetylcholinesterase activities analysis along with molecular docking simulation, we proposed differences in the underlying toxicity mechanisms of CEB-F and its photolysis products to D. magna. These findings highlight the potential harmful effects of FLCMs on aquatic ecosystems and enrich our understanding of the photolysis behavior of FLCMs.

Photochemistry of IrCl&lt;sub&gt;6&lt;/sub&gt;&lt;sup&gt;3–&lt;/sup&gt; complex in aqueous solutions

The photochemistry of the [IrIIICl6]3- complex in aqueous solutions was studied by the methods of stationary and laser flash photolysis. As the result of a light quantum absorption, parallel processes of photoaquatation and photoionization occur. The aquated electron ea–q, which is formed with a quantum yield of 0.12 (excitation at 266 nm), is predominantly decayed in reactions with the initial complex and dissolved oxygen. The rate constant of ea–q capture by the [IrIIICl6]3- complex was measured. The main final photolysis products are Ir(III) complexes with different compositions of ligands, as well as several percents of Ir(IV) complexes. The formation of final products occurs in the time range from milliseconds to seconds.

Laser flash photolysis and quantum chemical studies of UV degradation of pharmaceutical drug chloramphenicol: Short-lived intermediates, quantum yields and mechanism of photolysis

Using methods of time-resolved and stationary photolysis, HPLC-MS and quantum-chemical calculations by the DFT method, the mechanism of direct UV photolysis of the antibiotic chloramphenicol (CAP) was established. For the first time, short-lived intermediates formed during photolysis were detected. The primary photoprocess is the cleavage of the β-C-C bond relative to the aromatic system with the formation of 4-nitrobenzylalcohol radical and residual aliphatic radical. The first radical in deoxygenated solutions predominantly transforms into para-nitrobenzaldehyde and its secondary photolysis products. In the presence of oxygen, the aromatic radical and para-nitrobenzaldehyde are transformed into para-nitrosobenzoic and para-nitrobenzoic acids as a result of reaction with reactive oxygen species (ROS). Formation of ROS is provoked by reactions of aliphatic radical with dissolved oxygen, so this radical is very important for CAP degradation. The quantum yield of direct photolysis of CAP is ∼3% and does not depend on the presence of dissolved oxygen and on the change of the excitation wavelength in the range of 254–308 nm. Obtained data are important for further understanding of the transformation pathways of CAP and similar PPCP in natural and wastewaters under the action of sunlight and artificial UV radiation.

Photolysis of dinotefuran in aqueous solution: Kinetics, influencing factors and photodegradation mechanism

The environmental behaviour of neonicotinoid insecticides (NNIs) is of momentous concern due to their frequent detection in aquatic environment and their biotoxicity for non-target organisms. Phototransformation is one of the most significant transformation processes, which is directly related to NNIs exposure and environmental risks. In this study, the photodegradation of dinotefuran (DIN, 1-Methyl-2-nitro-3-(tetrahydro-3-furanylmethyl)-guanidine), one of the most promising NNIs, was conducted under irritated light in the presence of Cl−, DOM along with the effect of pH and initial concentration. The findings demonstrated that in ultra-pure (UP) water, the photolysis rate constants (k) of DIN rose with increasing initial concentration. Whereas, in tap water, at varied pH levels, and in the presence of Cl-, the outcomes were reversed. At the same time, lower concentration of DOM promoted DIN photolysis processes due to the production of reactive oxygen species, while higher concentrations of DOM inhibited the photolysis by the predominance of light shielding effects. The singlet oxygen (1O2) was produced in the photolysis processes of DIN with Cl− and DOM, which was confirmed by electron spin resonance (EPR) analysis. Four main photolysis products and three intermediates were identified by UPLC-Q-Exactive Orbitrap MS analysis. The possible photodegradation pathways of DIN were proposed including the oxidation by 1O2, reduction and hydrolysis after the removal of nitro group from parent compounds. This study expanding our understanding of transformation behavior and fate of NNIs in the aquatic environment, which is essential for estimating their environmental risks.