Photoluminescence Spectroscopy Research Articles

Photocatalytic Performance of the BaSn-based Nanoscale Materials for the Organic Pollutants Enhanced by Sm (Er) Doping

Background: Sm (Er) doping is an effective strategy for enhancing the photocatalytic activity of the semiconductor photocatalysts for the degradation of organic pollutants. BaSnbased nanorods possess wide band gap energy, which limits the photocatalytic application. It is important to research the feasibility of the improved photocatalytic performance of the BaSnbased nanorods by doping with Sm (Er). Objective: The aim is to synthesize Sm (Er)-doped BaSn-based nanoscale materials through a simple hydrothermal process and research the photocatalytic performance of the Sm (Er)-doped BaSn-based nanoscale materials for the gentian violet degradation. Methods: Sm (Er)-doped BaSn-based nanoscale materials with a polycrystalline structure were synthesized through a simple hydrothermal process. The Sm (Er)-doped composites were analyzed by X-ray diffraction, electron microscopy, solid diffuse reflectance spectrum, X-ray photoelectron spectroscopy, photoluminescence, and electrochemical impedance spectroscopy. Results: Sm (Er) doping induces the morphological evolution of the BaSn-based nanoscale materials from the nanorods to irregular nanoscale particles. Sm (Er) in the doped BaSn-based nanoscale materials exists in the form of the cubic Sm2Sn2O7 and orthorhombic ErF3 phases. The band gap value is decreased with increasing the Sm (Er) dopant contents. Sm (Er)-doped BnSnbased nanoscale materials with the Sm (Er) content of 8wt.% have the lowest band gap and show the strongest light absorption ability. Compared with the un-doped BaSn-based nanoscale materials, the Sm (Er)-doped BnSn-based nanoscale materials exhibit higher photocatalytic activity for the gentian violet degradation. 8wt.% Sm-doped BnSn-based nanoscale materials show the highest photocatalytic activity for the degradation of the gentian violet. 20 mL gentian violet solution (concentration of 10 mg·L-1) can be totally degraded using 20 mg 8wt.% Sm-doped BnSnbased nanoscale materials under UV light illumination for 150 min. Conclusion: The enhanced photocatalytic activity of the Sm (Er)-doped BnSn-based nanoscale materials can be attributed to the decreased band gap, enhanced light absorption ability, and decreased recombination of the photo-generated electron-hole pairs.

Role of Passivation Ligand in Exciton Diffusion and Emission Mechanism of Metal Halide Perovskite Nanocrystal Solid

Shorter-ligand passivated metal halide perovskite nanocrystal (PNC) solids possess smaller inter-NC edge distance which can potentially activate shorter-range nonradiative routes of energy transfer. However, these PNCs are prone to develop surface defects due to ligand detachment and the photogenerated excitons also have high probability to undergo dissociation. It remains unclear how these factors influence the exciton diffusion and emission mechanism of PNC solids. Herein, we prepare two PNC solids passivated with alkylamine and alkylacid ligands of different chain lengths and investigate the exciton diffusion and emission properties by combining time-resolved photoluminescence (PL) and low temperature PL spectroscopy. Our results show that due to the easy ligand detachment and rich surface defects, no prominent exciton transfer occurs in PNC solid passivated with short ligands, despite of the shorter distance between adjacent PNCs. In comparison, the PNC solid passivated with long ligands shows significant occurrence of exciton diffusion from high energy sites towards low energy sites. Accordingly, the PL spectra of thick PNC solid passivated with different ligands show a strikingly different evolution trend with decreasing temperature: in short ligand passivated PNC solid, an intrinsic emission is observed along with a defect-related emission arising from carrier trapping and subsequent radiative recombination, and both emissions are enhanced at lower temperature; in long ligand passivated PNC solid, high energy emission quenches while low energy emission is strengthened due to enhanced exciton transfer at lower temperature. This work reveals that the exciton diffusion and emission properties of PNC solid is strongly mediated by the passivation ligands, providing important insights for their applications in optoelectronic devices.

Amino-functionalized graphene quantum dots as a photoluminescent probe for in vitro cellular imaging of human lung cancer cell lines

Graphene-based fluorescent materials, particularly graphene quantum dots (GQDs), have emerged as a new class of biomedical agents. In the present study, functionalised GQDs have a better chance of being employed in a broader range of bioapplications because of their proven low toxicity, outstanding biocompatibility, and enhanced fluorescence properties. For this purpose, amino-functionalised GQDs (AF-GQDs) were synthesised via hydrothermal treatment by treating graphene oxide in ammonia with heat and water. The as-prepared AF-GQDs samples were characterised using a variety of techniques, including x-ray diffraction analysis (XRD), high-resolution transmission electron microscopy (HR-TEM), and photoluminescence (PL) spectroscopy. The results show that AF-GQDs are merely hexagonal, with an average size of about 8 nm. Also, AF-GQDs are highly soluble in water and display excellent luminescence behaviour. After 48 h of incubation, the MTT results showed that more than 63% of the cells were still alive, even at high concentrations (500 g ml−1) of AF-GQDs. In addition, the AO/EB staining results also showed that the AF-GQDs had the most robust green fluorescence (viable cells). This makes them a promising agent for biomedical imaging because they have good optical properties, are readily soluble in water, are biocompatible, and are not toxic.

Effect of the Addition of WO3 on the Structure and Luminescent Properties of ZnO-B2O3:Eu3+ Glass

Glasses with the compositions in mol % of 50ZnO:(50 − x)B2O3:0.5Eu2O3:xWO3, x = 0, 1, 3, 5 and 10 were obtained by applying the melt-quenching method and investigated by Raman spectroscopy, DSC analysis and photoluminescence (PL) spectroscopy. Raman spectra revealed that tungstate ions incorporate into the base zinc borate glass as tetrahedral [WO4]2− groups, and octahedral [WØ4O2]2− species with four bridging and two non-bridging oxygen atoms. There are also metaborate, [BØ2O]− and pyroborate units, [B2O5]4−, in the glass networks. The glasses are characterized by good transmission in the visible region, at about 80%. Photoluminescence (PL) spectra evidenced that WO3 is an appropriate constituent for the modification of zinc borate glass structure and for enhancing the Eu3+ luminescent intensity. The most intense luminescence peak observed, at 612 nm, suggests that the glasses are potential materials for red emission.

An Investigation of Two Cu (II)‐Based Hybrid Materials: Physico‐Chemical Characterization, Theoretical Calculation and Evaluation of The Inhibitory Activities against Key Enzymes related to Diabetes and Obesity

AbstractTwo complexes (C6H9N2)2[CuCl4] (1) and (C5H6N2Cl)2[CuCl4] (2) have been synthesized and characterized by single‐crystal X‐ray diffraction which revealed that these phases are centrosymmetric and crystallize, respectively, in monoclinic and triclinic symmetries. The thermal properties of both complexes are investigated as well as the UV‐Vis spectroscopic, photoluminescence properties, electronic paramagnetic resonance and biological activities. The crystal packing of the two compounds is guided by N−H⋅⋅⋅Cl hydrogen bonds and offset π–π stacking interactions; these interactions contribute to the overall stabilization of the structures as they connect anions and cations together into a three‐dimensional network. In addition, the optimized molecular structure was calculated by the Density Functional Theory (DFT) method using the B3LYP function with the LanL2DZ basis set. Subsequently, the thermal behavior was studied by TGA/DTA analyses. Moreover, the optical properties were studied using optical absorption UV‐visible and photoluminescence (PL) spectroscopy. The analysis of the magnetic properties is studied by electronic paramagnetic resonance (EPR). Simultaneously, compound (1) exhibits a potential inhibitory effect against the key enzymes associated with diabetes, obesity, and hyperlipidemia. It demonstrates IC50 values of 0.21 μM and 0.32 μM against α‐amylase and lipase, respectively. Consequently, it emerges as a promising candidate for the treatment of diabetes and obesity.

Antiprotozoal Pt(II) Complexes as Luminophores Bearing Monodentate P/As/Sb-Based Donors: An X-ray Diffractometric, Photoluminescence, and 121Sb-Mössbauer Spectroscopic Study with TD-DFT-Guided Interpretation and Predictive Extrapolation toward Bi.

In this study, it is demonstrated that the radiative rate constant of phosphorescent metal complexes can be substantially enhanced using monodentate ancillary ligands containing heavy donor atoms. Thus, the chlorido coligand from a Pt(II) complex bearing a monoanionic tridentate C^N*N luminophore ([PtLCl]) was replaced by triphenylphosphane (PPh3) and its heavier pnictogen congeners (i.e., PnPh3 to yield [PtL(PnPh3)]). Due to the high tridentate-ligand-centered character of the excited states, the P-related radiative rate is rather low while showing a significant boost upon replacement of the P donor by heavier As- and Sb-based units. The syntheses of the three complexes containing PPh3, AsPh3, and SbPh3 were completed by unambiguous characterization of the clean products using exact mass spectrometry, X-ray diffractometry, bidimensional NMR, and 121Sb-Mössbauer spectroscopy (for [PtL(SbPh3)]) as well as steady state and time-resolved photoluminescence spectroscopies. Hence, it was shown that the hybridization defects of the Vth main-group atoms can be overcome by complexation with the Pt center. Notably, the enhancement of the radiative rate constants mediated by heavier coligands was achieved without significantly influencing the character of the excited states. A rationalization of the results was achieved by TD-DFT. Even though the Bi-based homologue was not accessible due to phenylation side reactions, the experimental data allowed a reasonable extrapolation of the structural features whereas the hybridization defects and the excited state properties related to the Bi-species and its phosphorescence rate can be predicted by theory. The three complexes showed an interesting antiprotozoal activity, which was unexpectedly notorious for the P-containing complex. This work could pave the road toward new efficient materials for optoelectronics and novel antiparasitic drugs.

On the diverse utility of Cu doped ZnS/Fe3O4 nanocomposites.

The global water crisis is a growing concern, with water pollution from organic dyes being a significant issue. Photocatalysis has emerged as a sustainable and renewable method for removing organic pollutants from wastewater. The study synthesized innovative (2.5, 5 and 10 wt%) Cu doped zinc sulfide/iron oxide nanocomposites using a sonochemical method, which have versatile applications in adsorption and photocatalytic degradation of organic pollutants in wastewater. The nanocomposites underwent comprehensive characterization using powder X-ray diffraction, fourier-transform infrared spectroscopy, photoluminescence spectroscopy, Ultraviolet-Visible spectrophotometer, field emission scanning electron microscopy combined with energy dispersive X-ray spectroscopy and Mott-Schottky analysis. The synthesized samples demonstrate strong adsorption ability to remove RhB and MB dyes. Afterward, we evaluated their capability to degrade Rhodamine B (RhB) dye under UV light exposure. The greatest photocatalytic efficiency was noticed when employing a UV-C lamp in combination with the 10 wt% Cu doped ZnS/Fe3O4 nanocomposite as photocatalyst (98.8% degradation after 60 min irradiation). The Langmuir-Hinshelwood model can be used to describe the pseudo first order kinetics of RhB dye photodegradation. The calculated ban gap values are 4.77, 4.67, and 4.55 eV, for (2.5, 5 and 10 wt%) Cu doped ZnS/Fe3O4, respectively. Furthermore, 10 wt% Cu doped ZnS/Fe3O4 showed good recyclability, with a degradation rate of 89% even after five cycles. Consequently, prepared samples have outstanding photocatalytic activity and can be used as useful adsorbents in water purification.

Cu-doped NiO thin film's structural, optical, and electrical properties and its negative absorption behaviour in the Infra-Red region

NiO undoped and Cu-doped thin films on FTO-coated glass (fluorine-doped tin oxide) are prepared by employing the sol-gel spin coating method. The Cu-doping effect was observed in all the characterized reports such as absorption, transmittance, field emission scanning electron microscope (FESEM), Grazing Incidence X-ray Diffraction (GIXRD), photoluminescence (PL), Raman spectra, current-voltage measurement (IV), and X-ray photoelectron spectroscopy (XPS). Enhancement in electrical conductivity due to Cu doping and IR illumination has been found. Band gap can also be tuned by varying doping concentrations. One new phenomenon called negative absorption (NA) has been found while investigating the optical properties in the infrared (IR) region for both undoped and Cu-doped NiO on the FTO substrate, which opens a new door for advanced research. The multifarious properties of NiO thin films offer various applications in many different fields.

Controlling the Orientation‐Dependent Second Harmonic Generation in Hybrid Germanium Perovskite Crystals

Manipulating the crystal orientation plays a crucial role in the conversion efficiency during second harmonic generation (SHG). Here, we provide a new strategy in controlling the surface‐dependent anisotropic SHG with the precise design of (101) and (20) MAGeI3 facets. Based on the SHG measurement, the (101) MAGeI3 single crystal exhibits larger SHG (1.3 × (20) MAGeI3). Kelvin probe force microscopy imaging shows a smaller work function for the (101) MAGeI3 compared with the (20), which indirectly demonstrates the stronger intrinsic polarization on the (101) surface. X‐ray photoelectron spectroscopy confirms the band bending within the (101) facet. Temperature‐dependent steady‐state and time‐resolved photoluminescence spectroscopy show shorter lifetime and wider emission band in the (101) MAGeI3 single crystal, revealing the higher defect states. Additionally, powder X‐ray diffraction patterns show the (101) MAGeI3 possesses larger in‐plane polar units [GeI3]‐ density, which could directly enhance the spontaneous polarization in the (101) facet. Density functional theory (DFT) calculation further demonstrates the higher intrinsic polarization in the (101) facet compared with the (20) facet, and the larger built‐in electric field in the (101) facet facilitates surface vacancy defect accumulation. Our work provides a new angle in tuning and optimizing hybrid perovskite‐based nonlinear optical materials.

Controlling the Orientation-Dependent Second Harmonic Generation in Hybrid Germanium Perovskite Crystals.

Manipulating the crystal orientation plays a crucial role in the conversion efficiency during second harmonic generation (SHG). Here, we provide a new strategy in controlling the surface-dependent anisotropic SHG with the precise design of (101) and (20) MAGeI3 facets. Based on the SHG measurement, the (101) MAGeI3 single crystal exhibits larger SHG (1.3 × (20) MAGeI3). Kelvin probe force microscopy imaging shows a smaller work function for the (101) MAGeI3 compared with the (20), which indirectly demonstrates the stronger intrinsic polarization on the (101) surface. X-ray photoelectron spectroscopy confirms the band bending within the (101) facet. Temperature-dependent steady-state and time-resolved photoluminescence spectroscopy show shorter lifetime and wider emission band in the (101) MAGeI3 single crystal, revealing the higher defect states. Additionally, powder X-ray diffraction patterns show the (101) MAGeI3 possesses larger in-plane polar units [GeI3]- density, which could directly enhance the spontaneous polarization in the (101) facet. Density functional theory (DFT) calculation further demonstrates the higher intrinsic polarization in the (101) facet compared with the (20) facet, and the larger built-in electric field in the (101) facet facilitates surface vacancy defect accumulation. Our work provides a new angle in tuning and optimizing hybrid perovskite-based nonlinear optical materials.

Synthesis and characterization of Ag@Ni co-axial nanocables and their fluorescent and catalytic properties

Abstract We report here a convenient, rapid one-pot synthesis of new metal–metal core–shell nanocomposites comprising silver nanowires (AgNWs) coated with nickel. The resulting AgNWs and nickel-coated silver nanocables average 60–80 nm in diameter were prepared by the polyol synthetic route. This method employed ethylene glycol as a reducing agent and polyvinylpyrrolidone as a capping agent. These nanomaterials are designated as AgNWs (0.1 M) and Ag@Ni (0.2 M), Ag@Ni (0.3 M), Ag@Ni (0.4 M), and Ag@Ni (0.5 M) nanocables based on the nickel content and were characterized by scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV–Visible (UV–Vis) spectroscopy, and photoluminescence (PL) spectroscopy. The morphology of each nanowire and nanocable was clarified using SEM, while EDX quantified the presence of Ni. XRD patterns confirmed the face-centered cubic structure of the nanomaterials. The Debye–Scherrer formula was applied to establish different characteristics such as crystallite size and lattice constant. Surface plasmon resonance was measured using UV−Vis spectroscopy and fluorescence of each product was determined by PL spectroscopy, respectively. Both the AgNWs and Ag@Ni nanocables catalyze the reduction of p-nitrophenol to p-aminophenol by sodium borohydride.

Effective degradation of tetracycline under visible light by microwave-assisted reflux synthesis of ZnO/MoS2/rGO ternary nanocomposites

ZnO@MoS2 and conducting rGO based ternary nanocomposites were synthesized by a bottom-up microwave-assisted reflux method and effectively investigated for the photocatalytic degradation of tetracycline hydrochloride (TCH) antibiotic. The XRD, EDAX and XPS results corroborates the formation of nanostructure composite with high phase purity. The ZnO nanorods are well grafted on the curled configuration of layered MoS2 and thin surfaced rGO sheets as visualised from HR-TEM analysis. Upon addition of rGO, there is a significant decrease in the bandgap and improved visible light response in the ternary nanocomposites is elucidated by UV–visible Diffuse Reflectance Spectroscopy (UV-DRS) analysis. The suppression in photo-induced electron/hole pair recombination and allowing easy charge transport of ZnMG-50 were evidenced from photoluminescence (PL) and photo-electrochemical impedance (photo-EIS) spectroscopy. From BET and BJH analysis, the enhancement in surface area and pore volume by loading of rGO (SBET = 264.794 m2/g and 0.548 cm3/g). The optimized ZnMG-50 nano-photocatalyst possess a superior photocatalytic performance with higher removal efficiency of 92.18 % was achieved at pH level 10, catalyst dosage 40 mg and TCH concentration 20 ppm within 180 min under illumination. The degradation process compiles a pseudo-first order reaction with a kinetic rate constant of 0.01365 min−1. The nonstop generation of hydroxyl (˙OH) and superoxide (O2˙-) reactive species were beneficial for free electrons in the active participation, which remains as a core factor in the degradation process. The detailed study on ZnMG-50 nanocomposite substantiated to be an efficient noble metal-free synthetic catalyst for enhanced photocatalytic degradation of antibiotics.

An insight into structural, spectroscopic and nonlinear optical Application of a promising malononitrile derivative: (Z)-2-(3-chloro-3-(4-chlorophenyl)allylidene)malononitrile

Conjugated organic single crystals play a pivotal role as donor-acceptor molecules, showcasing nonlinear optical properties due to their unique molecular structure. In the present study, a novel functionalised allylidene malononitrile derivative, (Z)-2-(3-chloro-3-(4-chlorophenyl)allylidene)malononitrile, was synthesised and subjected to various spectroscopic and structural analyses for its optical and structural characterisation. This compound serves as an essential building block in developing photonic and optoelectronic materials. We synthesised the compound through a Vilsmeier-Haack reaction followed by a Knoevenagel condensation reaction and crystallised it using a slow evaporation method. In addition to SCXRD, the structural analysis of the compound was performed using NMR (1H, 13C), mass spectroscopy and FT-IR spectroscopy. The Intermolecular interactions were studied using Hirshfeld surfaces. The optical properties were analysed using UV–visible and photoluminescence spectroscopy. The third-order nonlinearity of the grown crystal was estimated using the NLO coefficients via the widely recognised femtosecond Z-scan technique, equipped with Ti:sapphire-based laser oscillator using laser pulses of 90 fs and a wavelength of 500 nm at various incident powers. It was observed that with increasing laser power, the nonlinear absorption coefficient of the sample also increased. These findings, combined with the calculation of the nonlinear refractive index, conclusively establish the potential of (Z)-2-(3-chloro-3-(4-chlorophenyl)allylidene)malononitrile for optoelectronic applications.

Photoluminescence studies of the charge states of nitrogen vacancy centers in diamond after arsenic ion implantation and subsequent annealing

In this work, nitrogen vacancy (NV) centers of high nitrogen diamond implanted with arsenic ions were investigated by photoluminescence spectroscopy. The transition of the NV center charge state was discussed by the regularly changing laser excitation power and measurement temperature following high-temperature annealing. After high-temperature annealing, the amorphous layer generated by arsenic ion implantation is transformed into a graphitization layer, resulting in a decrease in the NV yield. The electric neutral NV (NV0) center and negatively charged NV (NV−) center are affected by both radiation recombination and Auger recombination with increasing laser power. Accompanied by the increasing measurement temperature, the intensities of NV centers gradually decreased and eventually quenched. In addition, the charge states of NV− and NV0 centers were undergoing a transition. The zero phonon line positions of NV centers were also red shift, it was attributed to the dominant role of electron–phonon interaction in the temperature-dependent displacement of diamond energy gaps. The full width at half maxima of NV center were broadened significantly at higher temperatures.

Effect of hydrogen flow rate on properties of silicon oxycarbide thin films via hot wire chemical vapor deposition

AbstractThis study explores the impact of hydrogen flow as a carrier gas on silicon oxycarbide thin films produced via hot wire chemical vapor deposition (HWCVD) using tetraethyl orthosilicate as a precursor. Systematically varying the hydrogen flow rates, the influence on thin film composition, microstructure, and optical properties is investigated. Employing diverse characterization techniques, such as X‐ray diffraction, field‐emission scanning electron microscopy (FE‐SEM), energy‐dispersive X‐ray spectroscopy, Fourier‐transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), ellipsometry, and photoluminescence (PL) spectroscopy, it is revealed that there is a correlation between hydrogen flow rate and thin film elemental composition. Higher hydrogen flow rates result in increased silicon content and reduced contributions of oxygen and carbon. FE‐SEM images show agglomerates with improved homogeneity at higher flow rates. FTIR spectra highlight distinctive vibrational modes, including Si–H bonds. XPS confirms the emergence of Si–H bonds at elevated hydrogen flow rates. Ellipsometry indicates increased thickness and refractive index. PL spectra exhibit a broadband across the visible spectrum, influenced by hydrogen‐related defects and electronic transitions. This study provides findings for optimizing HWCVD parameters to tailor thin films for specific applications, emphasizing the important role of hydrogen flow as a carrier gas.

Impact of oxygen vacancies on enhanced NO2 gas sensing performance of lithium doped Co:ZnO thin films

This article explored the influence of lithium on cobalt-doped ZnO thin films fabricated via the sol–gel spin coating technique for NO2 gas sensing applications. The abundance of oxygen vacancies in ZnO can be proven by scanning electron microscopy, four-probe Hall measurements, photoluminescence spectroscopy, UV-visible spectroscopy, and x-ray photoelectron spectroscopy. The presence of lithium plays a crucial role in generating more oxygen vacancies in Co-doped ZnO was discussed. Among the fabricated samples, (Li-Co) co-doped ZnO exhibits better sensitivity (2940.17%), selectivity, repeatability, and stability (after 90 days) toward 75 ppm NO2 gas.

Elucidating the Role of Electron Transfer in the Photoluminescence of MoS2 Quantum Dots Synthesized by fs-Pulse Ablation.

Herein, MoS2 quantum dots (QDs) with controlled optical, structural, and electronic properties are synthesized using the femtosecond pulsed laser ablation in liquid (fs-PLAL) technique by varying the pulse width, ablation power, and ablation time to harness the potential for next-generation optoelectronics and quantum technology. Furthermore, this work elucidates key aspects of the mechanisms underlying the near-UV and blue emissions the accompanying large Stokes shift, and the consequent change in sample color with laser exposure parameters pertaining to MoS2 QDs. Through spectroscopic analysis, including UV-visible absorption, photoluminescence, and Raman spectroscopy, we successfully unraveled the mechanisms for the change in optoelectronic properties of MoS2 QDs with laser parameters. We realize that the occurrence of a secondary phase, specifically MoO3-x, is responsible for the significant Stokes shift and blue emission observed in this QD system. The primary factor influencing these activities is the electron transfer observed between these two phases, as validated by excitation-dependent photoluminescence and XPS and Raman spectroscopies.

Synthesis and Characterization of WO3/BiVO4/Graphene Ternary Nanocomposites for the Photodegradation of Methlyene Blue and Tetracycline

In this study, a hydrothermal method was employed to synthesize the ternary nanocomposites comprising WO3/BiVO4/Graphene, all driven by visible light. The characteristics of these nanocomposites were interpreted through techniques such as UV–Vis, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and photoluminescence spectroscopy (PL). The enhanced performance of the composite, attributed to its heightened capability for separating charge carriers, outperformed that of the individual semiconductor components. The PL results validated the composite's improved charge separation. The nanocomposites have weaker PL peaks, indicating slower e−/h+ recombination. The balanced concentrations of the mixed semiconductors in the composite affected both PL intensity and photodegradation efficiency. The photocatalytic degradation of methylene blue (MB) and tetracycline (TC) was observed by nanocomposites. The heterogeneous nanocomposite WOBV/G-5 with 0.03 mg graphene content has a better photocatalytic activity for both MB (63 %) and TC (80 %) than other concentrations. It has also been investigated using TOC and COD analysis. Moreover, zeta potential analysis and pH analysis have been done to check the conductivity of optimized photocatalyst. Additionally, to check the stability of WOBV/G-5 photocatalyst, recyclability test that shows 58 % degradation rate after five cycles and analysis of XRD after recyclability have also been performed. Role of active species (h+, O2−, and OH.) was observed by using different scavengers (EDTA, BQ, and IPA) in trapping experiment that plays a vital role in photocatalytic degradation process.

Tuning the Electronic Characteristics of Monolayer MoS2‐Based Transistors by Ion Irradiation: The Role of the Substrate

AbstractThis study explores defect engineering in 2D materials using ion beam irradiation to modify the electrical and optical properties with potential in advancing quantum electronics and photonics. Helium and neon ions ranging from 5 to 7.5 keV are employed to manipulate charge transport in monolayer molybdenum disulfide (MoS2). In situ electrical characterization occurs without vacuum breakage post‐irradiation. Raman and photoluminescence spectroscopy quantify ion irradiation's impact on MoS2. Small doses of helium ion irradiation enhance monolayer MoS2 conductivity in field‐effect transistor geometry by inducing doping and substrate charging. Findings reveal a strong correlation between the electrical properties of MoS2 and the primary ion used, as well as the substrate on which the irradiation occurred. Using hexagonal boron nitride (h‐BN) as a buffer layer between MoS2 flake and SiO2 substrate yields distinct alterations in electrical behavior subsequent to ion irradiation compared to the MoS2 layer directly interfacing with SiO2. Molecular dynamics simulations and density functional theory provide insight into experimental results, emphasizing substrate influence on measured electrical properties post‐ion irradiation.

Robust Layer‐Dependent Valley Polarization and Valley Coherence in Spiral WS2 at Room Temperature

In the emerging field of valleytronics, it is aimed to coherently manipulate the valley pseudospin as an information‐bearing degree of freedom. The 2D transition‐metal dichalcogenides (TMDCs) provide a unique possibility to generate an excitonic valley pseudospin, opening the way to valley information. Although significant development of valley pseudospin in layered materials has been achieved recently, looking for new TMDCs featuring robust valley phenomenon at room temperature is still desirable for practical applications. Herein, the valley pseudospin of the spiral WS2 with different layer thicknesses at room temperature is investigated by both circular and linear polarization‐resolved photoluminescence spectroscopy. In the experimental results, it is demonstrated that the spiral WS2 emerges robust valley polarization and valley coherence, the degree of circular polarization, and linear polarization gradually increase with the lift of the layer thicknesses, reaching up to 0.91 for valley polarization and 0.94 for valley coherence, respectively. The robust layer‐dependent valley pseudospin may originate from the intrinsic broken inversion symmetry, due to the spiral structure of the multilayer WS2. The robust and near‐unity valley polarization and valley coherence at room temperature in the spiral WS2 may provide a new platform for optical manipulation of the valley pseudospin for further valleytronics applications.