Photofermentative Hydrogen Production Research Articles

Enhanced photo-fermentative hydrogen production by constructing Rhodobacter capsulatus-ZnO/ZnS hybrid system

This study incorporated ZnO/ZnS nanoparticles with Rhodobacter capsulatus SB1003, forming a hybrid system to promote photo-fermentative hydrogen production. The results indicate that the material’s photocatalytic activity and concentration significantly affected hydrogen yield. The addition of ZnO/ZnS exhibited a more significant auxiliary effect than ZnO and achieved an approximately 30% increase in hydrogen production compared to the control group. ZnO/ZnS enhanced the production of extracellular polymers, thereby strengthening the synergy between the nanomaterials and the bacteria. The photogenerated electrons from ZnO/ZnS were utilized by the photosynthetic bacteria. Furthermore, the activity of nitrogenase was enhanced, resulting in improved hydrogen production performance. This study provides insights into hydrogen production by photosynthetic bacteria with the assistance of inorganic semiconductor nanomaterials.

WITHDRAWN: Prospects of graphene quantum dots preparation using lignocellulosic wastes for application in photofermentative hydrogen production

Graphene quantum dots (GQDs) are a novel carbon nanomaterial from the graphene family due to their unique physicochemical properties and diverse range of applications. However, in terms of the sustainable utility of GQDs, their synthesis methods are the main roadblock because of their high production costs and the release of toxic byproducts during the production processes. Thus, the search for sustainable and economical fabrication methods for preparing GQDs is one of the most essential areas of research for their practical applications. In this context, lignocellulosic biomass (LCB) wastes are a prime choice for the fabrication of GQDs due to their high carbon and cellulose content, which are favorable for being employed as precursors and reducing agents Additionally, LCBs are a prime source of potential bioenergy production, which is currently a key research hotspot to combat environmental pollution, global warming, and energy crises. Therefore, the present review provides feasibility for sustainable and environmentally friendly fabrication of GQDs using LCB wastes for their possible utility in cellulosic biofuel production technology improvement. Furthermore, the prospective of using these GQDs as catalysts in bioenergy production for the development of low-cost biomass-based biofuel production technology has been discussed along with the existing limitations and their sustainable recommendation.

Pilot composite tubular bioreactor for outdoor photo-fermentation hydrogen production: From batch to continuous operation

A novel 70 L composite tubular photo-bioreactor was constructed, and its photo-fermentation hydrogen production characteristics of batch and continuous modes were investigated with glucose as the substrate in an outdoor environment. In the batch fermentation stage, the hydrogen production rate peaked at 37.6 mL H2/(L·h) accompanied by a high hydrogen yield of 7 mol H2/mol glucose. The daytime light conversion efficiency is 4 %, with 37 % of light energy from the sun. An optimal hydraulic retention time of 5 d was identified during continuous photo-fermentation. Under this condition, the stability of the cell concentration is maintained and more electrons can be driven to the hydrogen generation pathway while attaining a hydrogen production rate of 20.7 ± 0.9 mL H2/(L·h). The changes of biomass, volatile fatty acids concentration and ion concentration during fermentation were analyzed. Continuous hydrogen production by composite tubular photo-bioreactor offers new ideas for the large-scale deployment of photobiological hydrogen production.

Multidimensional engineering of Rhodobacter sphaeroides for enhanced photo-fermentative hydrogen production

The photo-fermentative hydrogen production by purple non-sulfur photosynthetic bacteria (PNSB) is regarded as a promising approach for sustainable hydrogen production. In PNSB, biohydrogen synthesis is catalyzed by nitrogenase which requires two essential cofactors of adenosine triphosphate (ATP) and electron. To avoid the insufficient ATP supply that limits the nitrogenase activity for hydrogen production, we systematically engineered Rhodobacter sphaeroides to improve the hydrogen production by manipulating the light harvesting (LH) complexes, the electron transfer chain (ETC), the adenosine diphosphate (ADP) synthetic pathway, the F0F1-ATPase expression, and the nitrogenase expression. To improve the photosynthetic efficiency, we engineered the LH complexes by eliminating pucBA and overexpressing pufQ and spbA. Then, the ETC was boosted by deleting qxt-type oxidase and integrating the electron carrier cytochrome cy at the site of cyt cbb3 oxidase. In addition, we increased the supply of precursor ADP by overexpressing adk, and the abundance of F0F1-ATPase was efficiently enhanced through overexpressing atpXF. Further transposon engineering with the integration of nifHDK and atpXF resulted in a mutant YH27 with a substantial improvement of performance over the base strain, and its nitrogenase activity and hydrogen production were enhanced by 404 % and 93 %, respectively. Taken together, the multidimensional strategies enabled the engineered R. sphaeroides with a hydrogen productivity of 61.2 mL/(Lh) and a yield of 3.0 mol/mol acetate under the fed-batch condition, which represents one of the most efficient biohydrogen-producing strains.

Comparative analysis of photo-fermentation hydrogen production from pretreated corn stover by deep eutectic solvents

To compare the pretreatment effect of deep eutectic solvents (DESs) on corn stover, three types of DESs (acid, neutral, and alkaline) were used to pretreat corn stover, and their effects on lignin removal were investigated. Then the performance of photo-fermentation hydrogen production (PFHP) using DESs pretreated corn stover was compared and analyzed. The results showed that acid DESs had the best lignin removal efficiency, and the lignin removal percentages of choline chloride/formic acid (ChCl/Fac) and choline chloride/oxalate (ChCl/Oac) were 64.7% and 65.6%, respectively. The alkaline DESs had the second highest removal of lignin, while the neutral DESs had a poor effect on lignin removal. The comparison of hydrogen production indicated that the corn stover pretreated with ChCl/Oac had the best hydrogen production effect. In conclusion, the DESs pretreatment can obviously remove the lignin in corn stover, and then improve the hydrogen production capacity and efficiency of photo-fermentation, which provides a potential pretreatment method for the efficient utilization of straw biomass.

Effects of fbcFBC overexpression on ATP content and photo-fermentative hydrogen production performance of Rhodobacter sphaeroides HY01

Photosynthetic fermentation for hydrogen production can convert some organic compounds into hydrogen, thus realizing the dual benefits of waste utilization and energy production. However, the low H2 production rate is currently a major constraint restricting its further development. ATP synthesis during photophosphorylation could be a key factor on hydrogen production. In this work, the vector pRK415 and three endogenous promoters PpufQ, PpucB and PphaC were used to optimize the expression intensity of the fbcFBC gene, which encodes cytochrome bc1, a key protein in the photosynthetic electron transport chain. The effect of fbcFBC expression level on the hydrogen production performance of R. sphaeroides HY01 and its hydrogenase gene deletion mutant strain WH04 was studied. The hydrogen yields of pRKfbc/HY01 and pRKfbc/WH04 increased by 15.5% and 5.1% compared with the control. Substitutions of the fbcFBC promoter with promoters PpufQ, PpucB and PphaC, the transcription level of fbcFBC and ATP content were significantly improved. In particular, the transcription level of fbcFBC and ATP content in WHpuc were respectively increased by 734% and 57.0% compared with that in WH04. The results demonstrate that Cyt bc1 is a limiting factor affecting ATP synthesis in the process of photo-fermentative hydrogen production. The mutants overexpressing fbcFBC are more efficient in hydrogen production than the naturally isolated strains under the medium light intensity of 5000 lux.

Enhancement on photobiological hydrogen production from corn stalk via reducing hydrogen pressure in bioreactors by way of phased decompression schemes

In this project, it was verified that properly reducing the bioreactor hydrogen partial pressure (HPP) could significantly enhance the photo-fermentative hydrogen production (PFHP) by corn stalk. The maximal cumulative hydrogen yield (CHY) of 82.37 mL/g was obtained under full decompression to 0.4 bar, which was 35% higher than that without decompression. To increase CHY and save the pressure control cost, 12-hour, 24-hour and 36-hour decompression schemes were provided, and the optimal decompression phase in fermentation under each scheme was investigated. The 12-hour decompression scheme was suitable for 24–36 h of fermentation; the 24-hour decompression scheme implemented within 12–36 h of fermentation had a more desirable CHY; when adopting the 36-hour decompression scheme, operation during 12–48 h yielded a CHY of 81.70 mL/g that approximated whole process decompression. The strategies of decompression at the appropriate phase of fermentation were innovative, which offered a new option for optimizing PFHP economically.

Triggering photo fermentative biohydrogen production through NiFe2O4 photo nanocatalysts with various excitation sources

The triggering effects of nickel ferrite (NiFe2O4) photo nanocatalysts on photo fermentative hydrogen production (PFHP), and metabolic pathways under various excitation sources (incandescent lamp, Xenon lamp, and 532 laser) have been investigated. Compare to the control group (CG) highest cumulative hydrogen volume (CHV) and the maximum hydrogen production rate (HPR) of 568.8 mL and 9.17 mL/h, respectively were achieved at a loading centration of 150 mg/L excited with an incandescent lamp. The change in metabolites with NiFe2O4 incorporation suggests that bacterial activity is significantly affected by photo nanocatalysts. Triggering of NiFe2O4 by laser excitation showed the highest HPR of 7.83 mL /h within 24 h, which greatly reduces the lag time. The microbial community investigation showed that the addition of NiFe2O4 photo nanocatalysts and the change of light source effectively improved the microbial community structure and increased the abundance of hydrogen-producing bacteria (HPB) which leads to enhanced hydrogen production.

A preliminary techno-economic analysis of photofermentative hydrogen production

Photofermentative hydrogen production promises sustainable energy using cheap feedstock and sunlight. While successful laboratory and pilot-scale photofermentative production studies are widespread, overall economic feasibility remains to be demonstrated. In this study, a preliminary techno-economic analysis of photofermentative production based on current technology was carried out, and the results were compared to alternatives such as photovoltaic electrolysis.Specific photofermentative hydrogen cost was estimated based on an existing outdoor, pilot-scale (20 L) photobioreactor system. The annual capital cost was calculated as 124 USD/year including equipment and land. Operating cost was calculated as 42 USD/year including maintenance, energy consumption and feedstock. The specific hydrogen production cost was found as 2.7 USD/mol (1362 USD/kg H2), and 395 USD/kg H2 when equipment cost is subsidized. Further analysis shows that utilization of wastewater as feedstock and a boost in hydrogen productivity could reduce specific cost of hydrogen to levels competitive with alternative technologies.

Genetically engineered deletion in the N-terminal region of nifA1 in R. capsulatus to enhance hydrogen production

NifA is the primary activator of nitrogenase, and the N-terminal domain of nifA is sensitive to ammonium concentration. In this work, a mutant Rhodobacter capsulatus ZX01 with a genetically engineered deletion in the N-terminal region of nifA1 was constructed by employing overlap extension PCR to mitigate the inhibition of ammonium on nitrogenase expression in photosynthetic bacteria. The effects of different ammonium ion concentrations on the growth and photo-fermentative hydrogen production performance of wild-type strain R. capsulatus SB1003 and mutant ZX01 with glucose and volatile fatty acids as the carbon sources were studied, respectively. When the ratio of NH4+-N was 20% and 30%, the hydrogen yield of the mutant ZX01 was enhanced by 14.8% and 20.9% compared with that of R. capsulatus SB1003 using 25 mM acetic acid and 34 mM butyric acid as the carbon source, respectively. In comparison, using 30 mM glucose as the carbon source, the hydrogen yield of ZX01 was increased by 17.7% and 22.2% compared with that of R. capsulatus SB1003 when the ratio of NH4+-N was 20% and 30%, and the nitrogenase activity of ZX01 was also enhanced by 38.0% and 47.6%, respectively. When using 10 mM NH4+ as a single nitrogen source, ZX01 showed a 2.6-fold increase in H2 production. These results indicated that ZX01 demonstrated higher ammonium tolerance and better hydrogen production performance than the wild-type. The deletion in the N-terminal region of nifA1 could partially de-repress the nitrogenase activity inhibited by ammonium.

The effect of diurnal light cycles on biohydrogen production in a thermosiphon photobioreactor

Hydrogen production via microbial photofermentation shows great promise as a method for sustainable hydrogen production; however, operating costs associated with photofermentative hydrogen production need to be reduced. Costs can be reduced using a passive circulation system like the thermosiphon photobioreactor, and by operating it under natural sunlight. In this study, an automated system was implemented to investigate the effect of diurnal light cycles on the hydrogen productivity and growth of Rhodopseudomonas palustris and on the operation of a thermosiphon photobioreactor, under controlled conditions. Diurnal light cycles, simulating daylight times, were found to reduce hydrogen production in the thermosiphon photobioreactor demonstrating a low maximum production rate of 0.015 mol m−3 h−1 (± 0.002 mol m−3 h−1) as compared to 0.180 mol m−3 h−1 (± 0.0003 mol m−3 h−1) under continuous illumination. Glycerol consumption as well as hydrogen yield also decreased under diurnal light cycles. Nonetheless, hydrogen production in a thermosiphon photobioreactor under outdoor conditions was demonstrated as possible avenue for further investigation.

Modeling and optimization of photo-fermentation biohydrogen production from co-substrates basing on response surface methodology and artificial neural network integrated genetic algorithm

The main aim of the present study was to establish a relationship model between bio-hydrogen yield and the key operating parameters affecting photo-fermentation hydrogen production (PFHP) from co-substrates. Central composite design-response surface methodology (CCD-RSM) and artificial neural network-genetic algorithm (ANN-GA) models were used to optimize the hydrogen production performance from co-substrates. Compared to CCD-RSM, the ANN-GA had higher determination coefficient (R2 = 0.9785) and lower mean square error (MSE = 9.87), average percentage deviation (APD = 2.72) and error (4.3%), indicating the ANN-GA was more suitable, reliable and accurate in predicting biohydrogen yield from co-substrates by PFHP. The highest biohydrogen yield (99.09 mL/g) predicted by the ANN-GA model at substrate concentration 35.62 g/L, temperature 30.94 °C, initial pH 7.49 and inoculation ratio 32.98 %(v/v), which was 4.20 % higher than the CCD-RSM model (95.10 mL/g).

The exploration of hydrogen production promoting mechanism of Rhodobacter sphaeroides by expressing tetA under tetracycline stress

Photo-fermentative hydrogen production rate improving has been a key limiting link in the field of biological hydrogen production by photosynthetic bacterium (PSB) in recent years. In our previous study, apparent hydrogen production enhancement was observed in R. sphaeroides HY01 with tetA expressed under tetracycline (Tc), which attracted our interests. It was found that Tc-resistant strains always presented stable hydrogen production promotion on the maximum hydrogen production rate (Rm), which was approximately 30% with Tc addition. Figuring out the underlying connections between Tc resistance and hydrogen production of R. sphaeroides may provide new methods for obtaining engineered PSB with high hydrogen production performance. In this study, basing on experimental tests, hydrogen promotion of resistant strain was found to be Tc dose-dependent. Some relevant gene expression differences on hydrogen production of Rodobacter sphaeroides induced by the expression of TetA and the addition of Tc were also tested and discussed.

A mechanistic mathematical model for photo fermentative hydrogen and polyhydroxybutyrate production.

An original mathematical model describing the photo fermentation process is proposed. The model represents the first attempt to describe the photo fermentative hydrogen production and polyhydroxybutyrate accumulation, simultaneously. The mathematical model is derived from mass balance principles and consists of a system of ordinary differential equations describing the biomass growth, the nitrogen and the substrate degradation, the hydrogen and other catabolites production, and the polyhydroxybutyrate accumulation in photo fermentation systems. Moreover, the model takes into account important inhibiting phenomena, such as the self-shading and the substrate inhibition, which can occur during the evolution of the process. The calibration was performed using a real experimental data set and it was supported by the results of a sensitivity analysis study. The results showed that the most sensitive parameters for both hydrogen and PHB production were the hydrogen yield on substrate, the catabolites yield on substrate, and the biomass yield. Successively, a different experimental data set was used to validate the model. Performance indicators showed that the model could efficiently be used to simulate the photo fermentative hydrogen and polyhydroxybutyrate production by Rhodopseudomonas palustris. For instance, the index of agreement of 0.95 was observed for the validated hydrogen production trend. Moreover, the model well predicted the maximum PHB accumulation in bacterial cells. Indeed, the predicted and observed accumulated PHB were 4.5 and 4.8%, respectively. Further numerical simulations demonstrated the model consistency in describing process inhibiting phenomena. Numerical simulations showed that the acetate and nitrogen inhibition phenomena take place when concentrations are higher than 12.44 g L-1 and lower than 4.76 mg L-1, respectively. Finally, the potential long term hydrogen production from accumulated polyhydroxybutyrate in bacterial cells was studied via a fast-slow analysis technique.

Effects of Different Hydrolysis Methods on the Hydrolysate Characteristics and Photo-Fermentative Hydrogen Production Performance of Corn and Sorghum Straw

The effects of hydrolysis methods (hydrothermal, acid, alkali, hydrothermal-enzyme, acid-enzyme, and alkali-enzyme) on hydrolysate characteristics and photo fermentative hydrogen production (PFHP) of corn straw (CS) and sorghum straw (SS) were investigated. The optimum production of reducing the sugar of straw in different solvent environments was studied by one-step hydrolysis and co-enzymatic hydrolysis pretreatment through a 3,5-dinitrosalicylic acid method. The hydrogen production process by photolytic fermentation of hydrolysates of Rhodobacter sphaeroides HY01 was further analyzed through a gas chromatograph, including the differences in accumulated PFHP yield, chemical oxygen consumption (COD), and volatile fatty acid (VFA) composition. The results showed that the highest reducing sugar yield was obtained by the acid method among one-step hydrolysis. In contrast, acid-enzyme hydrolysis can further increase the reducing sugar yield, which reached 0.42 g·g−1-straw of both straws. Both CS and SS had the highest hydrogen yield from acid-enzyme hydrolysate, 122.72 ± 3.34 mL·g−1-total solid of straw (TS) and 170.04 ± 4.12 mL·g−1-TS, respectively, compared with their acid hydrolysates with 40.46% and 10.53% higher hydrogen yields, respectively. The use of enzymatic hydrolysis showed a significantly higher hydrogen yield for CS compared to SS, indicating that acid hydrolysis was more suitable for SS and acid-enzyme hydrolysis was more suitable for CS.

Enhancement of Photo-Fermentative Hydrogen Production with Co-culture of Rhodobacter capsulatus and Rhodospirillum rubrum by Using Medium Renewal Strategy

Enhancement of Photo-Fermentative Hydrogen Production with Co-culture of Rhodobacter capsulatus and Rhodospirillum rubrum by Using Medium Renewal Strategy

Modelling and testing of a light reflector system for the enhancement of biohydrogen production in a thermosiphon photobioreactor

One of the main factors affecting hydrogen production and growth of photofermentative microorganisms is light; low light penetration and utilization are significant bottlenecks in photofermentative hydrogen production systems. In this study, light distribution in a thermosiphon photobioreactor operated with Rhodopseudomonas palustris was investigated. Radiation fields were modelled and simulated using computational fluid dynamics (ANSYS® Fluent, 2019 R2) and a reflector system was evaluated for the enhancement of light distribution in a thermosiphon photobioreactor. The effect of the reflector system was investigated experimentally in terms of hydrogen production, carbon substrate consumption and biomass circulation in the reactor. With the addition of the reflector system, hydrogen production was increased by 48% while glycerol consumption was increased from approximately 24% to 32%. After 336 h, the concentration of R. palustris cells still in suspension ranged from 0.13 to 0.18 g∙L−1, with no discernible difference in concentration between the systems with and without reflectors. Collectively, the reflector system was shown to be a viable option in enhancing light distribution in photobioreactors, with an associated increase in both hydrogen production as well as glycerol consumption.

Enhancing biohydrogen yield from corn stover by photo fermentation via adjusting photobioreactor headspace pressure

In this study, the effect of bioreactor headspace pressure regulation on photo-fermentative hydrogen production (PFHP) from corn stover (CS) was investigated. The results showed that the headspace pressure could significantly affect the performance of PFHP. With the decrease in the reactor headspace pressure (100 kPa–10 kPa), cumulative biohydrogen production firstincreased and then decreased, the maximum hydrogen yield of 546.57 mL was obtained at the headspace pressure of 30 kPa. The parameters of Gompertz model showed a lower hydrogen partial pressure was beneficial to speed up the reaction process and shorten the hydrogen production delay time of the system, however, too low pressure would inhibit the metabolism of microorganisms in the PFHP process, resulting lower hydrogen yield obtained.

A life cycle impact analysis of various hydrogen production methods for public transportation sector

Reducing greenhouse gas emissions is an important task to reduce the adverse effects of climate change. A large portion of greenhouse gas emissions apparently originates from the transportation sector. Therefore, adopting cleaner technologies with lower emission footprints has become vital. For this reason, in this study, a life cycle impact analysis of hydrogen production technologies as an alternative to fossil fuels and the utilization of hydrogen in fuel cell electric buses is carried out. According to the results of this study, the operational contributions of internal combustion engines have a significant impact on life cycle impact analysis indicators. The global warming potentials of clean hydrogen production technologies result in much lower results compared to conventional hydrogen production technologies. Also, almost all indicators for biohydrogen production technologiess yield lower results because of the wastewater removal. The global warming potential results of hydrogen production methods are found to be 6.8, 1.9, 2.1, 0.5, 0.2, and 7.9 kg CO2 eq./kg H2 for PV electrolysis, wind electrolysis, high temperature electrolysis, dark fermentation, photo fermentation and conventional hydrogen production, respectively. However, the chemicals used in PV and wind turbine production increased the ecotoxicological indicators. On the other hand, hydrogen utilization in buses is a better option environmentally. The global warming potentials for PV electrolysis, wind electrolysis, high temperature electrolysis, dark fermentation, photo fermentation, conventional hydrogen, compressed natural gas bus, and diesel bus are found to be 0.060, 0.016, 0.018, 0.007, 0.006, 0.053, 0.082, and 0.125 kg CO2 eq./p.km, respectively. The results are especially important in terms of reducing the effects at the source and optimizing the systems.

Influence of nanomaterials in biohydrogen production through photo fermentation and photolysis - Review on applications and mechanism

The pressure on reducing greenhouse gas emissions has increased since the focus on climate change mitigation has grown. As the human development index is directly related to per capita energy consumption, sustainable energy production with reduced carbon footprint is the essential pathway for cleaner environment. Over numerous existing biological processes, hydrogen production via photo fermentation and photolysis of water is considered a more sustainable and economical method of hydrogen production. While both biological modes suffer from certain limitations, such as low yields and low production rates, practical implementation is still a long way off due to these limitations. The unique properties of nanomaterials (NMs) can help increase the efficiency of the biomass to biohydrogen process in significant ways. Applications of organic and inorganic nanoparticles in photocatalytic and photo fermentative hydrogen production is discussed in this paper. This review reports a wide range of applications of nanomaterials including the details of photo fermentative microorganisms and their mechanism of action. The maximum photo fermentative bio-H2 production was reported in the presence of SiC–Fe3O4(3.02 mol H2/mol acetate), Ni (41 mol H2/mol sugar), graphite-C3N4 (64.2 mol H2/mol sugar) whereas photocatalytic bio-H2 yield was highest when Pd–Ni/CdS (54 mmol/g.h), Ni-MO/g-C3N4 (1785 mmol/g.h) and CuO/TiO2 (20.3 mmol/g.h) nanoparticles were employed. To design photocatalytic systems for practical and scalable use, the future research should be focused on deeper theoretical knowledge of mechanisms of light harvesting, ± charge separation and transport, surface biochemical reactions, semiconductor–liquid interactions, and reactor dynamics.