Photofermentative Biohydrogen Production Research Articles

Catalyzing the metabolism through CoFe2O4 magnetic photocatalyst for photo fermentative biohydrogen production: Selectivity and recyclability across diverse strains

The interaction between the photo-induced charges from photo nanocatalysts (PNCs) and biohydrogen production strains plays a key role in controlling the metabolism mechanism in fermentative biohydrogen production from lignocellulosic biomass wastes. Thus, in the present study, two strains of Rhodopseudomonas palustris (PNSB) and a mixed consortium of HAU-M1 were evaluated for their biohydrogen production potential from corn stover (CS), whereas metabolism was catalyzed through photo-induced electrons from magnetic PNCs of cobalt ferrite (CoFe2O4). The threshold concentration of CoFe2O4 (400 mg/L) produced 428.62 mL and 373.30 mL biohydrogen in PNSB and HAU-M1, which is 129.0 % and 81.12 % higher as compared to respective control groups (CGs), respectively. The presence of PNCs provides the photo-induced electrons, which catalyze the metabolic processes as butyric acid increases by 96.29 % and 94.87 % in PNSB and HAU-M1, respectively, hence increasing hydrogen production. The results were supported by microbial community investigation, which showed that the incorporation of the appropriate concentration of PNCs effectively changes the bacterial community dynamics and diversifies the phyla (Firmicutes, Proteobacteria, and Bacteroidetes) and hydrogen-producing genus Clostridium. The recovered yield of CoFe2O4 PNCs from PNSB and HAU-M1 fermentative mediums in three consecutive cycles was (90.87 %, 88.94 %), (80.25 %, 72.25 %), and (69.75 %, 60.80 %) respectively showing potential for recycling catalysts during the fermentation process. Thus, selecting the right photocatalysts and strain can affect metabolism and biohydrogen production, while recyclability reduces environmental leaching.

Outdoor biohydrogen production by thermotolerant Rhodopseudomonas pentothenatexigens KKU-SN1/1 in a cluster of ten bioreactors system.

In tropical regions, the viability of outdoor photo-fermentative biohydrogen production faces challenges arising from elevated temperatures and varying light intensity. This research aimed to explore how high temperatures and outdoor environments impact both biohydrogen production and the growth of purple non-sulfur bacteria. Our findings revealed the potential of Rhodopseudomonas spp. as a robust outdoor hydrogen-producing bacteria, demonstrating its capacity to thrive and generate biohydrogen even at 40°C and under fluctuating outdoor conditions. Rhodopseudomonas harwoodiae NM3/1-2 produced the highest cumulative biohydrogen of 223mL/L under anaerobic light conditions at 40°C, while Rhodopseudomonas harwoodiae 2M had the highest dry cell weight of 2.93g/L. However, R. harwoodiae NM3/1-2 demonstrated the highest dry cell weight of 3.99g/L and Rhodopseudomonas pentothenatexigens KKU-SN1/1 exhibited the highest cumulative biohydrogen production of 400mL/L when grown outdoors. In addition, the outdoor enhancement of biohydrogen production was achieved through the utilization of a cluster of ten bioreactors system. The outcomes demonstrated a notable improvement in biohydrogen production efficiency, marked by the highest daily biohydrogen production of 493mL/Ld by R. pentothenatexigens KKU-SN1/1. Significantly, the highest biohydrogen production rate was noted to be 17 times greater than that observed in conventional batch production methods. This study is the first to utilize R. pentothenatexigens and R. harwoodiae for sustained biohydrogen production at high temperatures and in outdoor conditions over an extended operational period. The successful utilization of a clustered system of ten bioreactors demonstrates potential to scale-up for industrial biohydrogen production.

Enhancement of biohydrogen production by photo-fermentation of corn stover via visible light catalyzed titanium dioxide/activated carbon fiber

In this study, titanium dioxide/activated carbon fiber (TiO2/ACF) was synthesized by liquid-phase deposition method and the effect of TiO2/ACF on the performance of photo-fermentation biohydrogen production (PFHP) from corn stover under visible light catalysis was discussed. Results show the maximum cumulative hydrogen yield (CHY) obtained under the optimal conditions was 74.0 ± 1.3 mL/g TS with TiO2/ACF addition of 100 mg/L, which was twice that without TiO2/ACF addition (36.9 ± 1.0 mL/g TS). Initial pH value had the most significant effect on CHY. The addition of TiO2/ACF promoted the metabolic pathway of nitrogenase to reduce H+ produced by consuming acetic acid and butyric acid to hydrogen, and also shortened the photo-fermentation period. By scanning electron microscopy and X-ray diffraction analysis, the morphology and phase structure of TiO2/ACF after PFHP did not change significantly. This study laid the foundation for the reuse of TiO2 and its practical application in PFHP.

Optimization of photofermentative biohydrogen production in a mixed volatile fatty acid medium by Rhodobacter sp. MAY2: A response surface methodology (RSM) approach

Biohydrogen production through photofermentation has gained significant attention as it provides a sustainable solution for clean energy supply and addresses wastewater concerns by utilizing volatile fatty acids (VFA) which are produced in dark fermentation. In this study, response surface methodology via a Face-centered Central Composite Design (FCCD) was employed to optimize buffer solution pH, ferric citrate concentration, sodium glutamate concentration to maximize biohydrogen production by Rhodobacter sp. MAY2 with mixed VFA (acetate, propionate, butyrate) as substrates. Results showed that the concentrations of ferric citrate, sodium glutamate, and buffer solution pH positively impact the biohydrogen production of Rhodobacter sp. MAY2. The optimal conditions were shown to be 0.36 mM ferric citrate, 11 mM sodium glutamate, and buffer solution of pH 7. The predicted hydrogen production potential (HPP) at these conditions (661.1 mL/L) was within 2 % of the actual HPP (647.7 mL/L). Kinetic parameters using the modified Gompertz equation showed that the predicted values for maximum potential cumulative H2 production (P), maximum hydrogen production rate (Rm), and lag time (λ) are comparable to those reported in literature. Overall, the study highlighted the potential of a local isolate, Rhodobacter sp. MAY2, for biohydrogen production and the suitable fermentation conditions for its growth.

Impact of light spectra on photo-fermentative biohydrogen production by Rhodobacter sphaeroides KKU-PS1

Purple non-sulphur bacteria can only capture up to 10 % light spectra and only 1–5 % of light is converted efficiently for biohydrogen production. To enhance light capture and conversion efficiencies, it is necessary to understand the impact of various light spectra on light harvesting pigments. During photo-fermentation, Rhodobacter sphaeroides KKU-PS1 cultivated at 30 °C and 150 rpm under different light spectra has been investigated. Results revealed that red light is more beneficial for biomass accumulation, whereas green light showed the greatest impact on photo-fermentative biohydrogen production. Light conversion efficiency by green light is 2-folds of that under control white light, hence photo-hydrogen productivity is ranked as green > red > orange > violet > blue > yellow. These experimental data demonstrated that green and red lights are essential for photo-hydrogen and biomass productions of R. sphaeroides and a clearer understanding that possibly pave the way for further photosynthetic enhancement research.

Influence of titanate photocatalyst in biohydrogen yield via photo fermentation from corn stover

The effects of three common titanate photocatalysts (TPC) on the photo fermentation biohydrogen production (PFHP) from corn stover were studied in this paper. Compared with CaTiO3 and BaTiO3, the experimental group with the addition of MgTiO3 showed stronger potential for PFHP, the maximum hydrogen yield of 344 mL (68.8 mL/g TS) was obtained at 3 g/L MgTiO3, increased by 48.3%. For CaTiO3, BaTiO3, the optimal amount of addition was 8 and 7 g/L, respectively, in which, the hydrogen yield was 308 and 288 mL (61.6 and 57.6 mL/g TS). TPC addition could shorten the delay period of hydrogen production lower the Oxidation-Reduction Potential (ORP) of fermentation broth, especially MgTiO3 addition, the delayed hydrogen production could be shortened by 33.2% compared with control group, and the ORP could reach the lowest value of −371 mV.

Comparison of biorefinery characteristics: Photo-fermentation biohydrogen, dark fermentation biohydrogen, biomethane, and bioethanol production

Biorefinery technology promotes the realization of the Paris Agreement, China’s achievement of its carbon peak, and carbon neutralization. Photo-fermentation biohydrogen production, dark fermentation biohydrogen production, biomethane production, and bioethanol production are several promising biorefinery methods. In this study, corn stover was used as the raw material, and the gas, liquid, and kinetic characteristics of four biorefinery methods were investigated. The production yield, gross thermal energy, economy, and greenhouse gas emissions of the target product per gram of corn stover were studied. The maximum yields of photo-fermentation biohydrogen production, dark fermentation biohydrogen production, biomethane production, and bioethanol production were 68.4 mL/g dry matter (DM), 47.4 mL/g DM, 196.0 mL/g DM, and 2.7 g/L, respectively. The maximum gross thermal energy obtained from biomethane production was 7017.3 J/g DM. The maximum economy of 1.4 RMB/g DM was observed in photo-fermentation biohydrogen production. The highest greenhouse gas emission of the target product from biomethane production was 196.0 mL/g DM. The results provide a reference for the efficient utilization of biomass resources and a comprehensive evaluation of biorefinery technology.

Triggering photo fermentative biohydrogen production through NiFe2O4 photo nanocatalysts with various excitation sources

The triggering effects of nickel ferrite (NiFe2O4) photo nanocatalysts on photo fermentative hydrogen production (PFHP), and metabolic pathways under various excitation sources (incandescent lamp, Xenon lamp, and 532 laser) have been investigated. Compare to the control group (CG) highest cumulative hydrogen volume (CHV) and the maximum hydrogen production rate (HPR) of 568.8 mL and 9.17 mL/h, respectively were achieved at a loading centration of 150 mg/L excited with an incandescent lamp. The change in metabolites with NiFe2O4 incorporation suggests that bacterial activity is significantly affected by photo nanocatalysts. Triggering of NiFe2O4 by laser excitation showed the highest HPR of 7.83 mL /h within 24 h, which greatly reduces the lag time. The microbial community investigation showed that the addition of NiFe2O4 photo nanocatalysts and the change of light source effectively improved the microbial community structure and increased the abundance of hydrogen-producing bacteria (HPB) which leads to enhanced hydrogen production.

Enhanced biohydrogen yield and light conversion efficiency during photo-fermentation using immobilized photo-catalytic nano-particles

Bacterial immobilization is a common method in anaerobic fermentation, since of the maintenance of high bacterial activity, insurance of high density microbial during continuous fermentation, and quick adaptability to the environment. While, the bio-hydrogen production capacity of immobilized photosynthetic bacteria (I-PSB) is seriously affected by the low light transfer efficiency. Hence, in this study, photo-catalytic nano-particles (PNPs) was added into the photo-fermentative bio-hydrogen production (PFHP) system, and its enhancement effects of bio-hydrogen production performance were investigated. Results showed that the maximum cumulative hydrogen yield (CHY) of I-PSB with 100 mg/L nano-SnO2 (154.33 ± 7.33 mL) addition was 18.54% and 33.06% higher than those of I-PSB without nano-SnO2 addition and control group (free cells), and the lag time was the shortest indicating a shorter cell arrest time, more cells and faster response. Maximum energy recovery efficiency and light conversion efficiency were also found to be increased by 18.5% and 12.4%, respectively.

Pretreatment of Arundo donax L. for photo-fermentative biohydrogen production by ultrasonication and ionic liquid

Combined pretreatment methods were assumed to further enhance photo-fermentative biohydrogen production (PFHP) from lignocellulosic biomass. For this purpose, an ultrasonication assisted ionic liquid pretreatment was applied to Arundo donax L. biomass for PFHP. The optimal condition for the combined pretreatment was 16 g/L of 1-Butyl-3-methylimidazolium Hydrogen Sulfate ([Bmim]HSO4) combined with ultrasonication at a solid to liquid ratio (SLR) of 1:10 for 1.5 h under 60 °C. Under this condition, the maximum delignification of 22.9 % was obtained, in addition, the hydrogen yield (HY) and energy conversion efficiency (ECE) were enhanced by 1.5-fold and 46.4 % (p < 0.05) compared to untreated biomass, respectively. Moreover, heat map analysis was performed to evaluate the correlation between pretreatment conditions and corresponding results, suggesting pretreatment temperature had the strongest (absolute value of Pearson’s r was 0.97) linear correlation with HY. Combined multiple energy production approaches might be useful for further improved ECE.

Modeling and optimization of photo-fermentation biohydrogen production from co-substrates basing on response surface methodology and artificial neural network integrated genetic algorithm

The main aim of the present study was to establish a relationship model between bio-hydrogen yield and the key operating parameters affecting photo-fermentation hydrogen production (PFHP) from co-substrates. Central composite design-response surface methodology (CCD-RSM) and artificial neural network-genetic algorithm (ANN-GA) models were used to optimize the hydrogen production performance from co-substrates. Compared to CCD-RSM, the ANN-GA had higher determination coefficient (R2 = 0.9785) and lower mean square error (MSE = 9.87), average percentage deviation (APD = 2.72) and error (4.3%), indicating the ANN-GA was more suitable, reliable and accurate in predicting biohydrogen yield from co-substrates by PFHP. The highest biohydrogen yield (99.09 mL/g) predicted by the ANN-GA model at substrate concentration 35.62 g/L, temperature 30.94 °C, initial pH 7.49 and inoculation ratio 32.98 %(v/v), which was 4.20 % higher than the CCD-RSM model (95.10 mL/g).

Synergetic effect evaluation of light and mass transfer enhancement strategies on photo fermentative biohydrogen production process: Illumination, shake, and high solid level

During the process of photo fermentative biohydrogen production (PFHP) with high substrate concentration from agricultural waste, the interphase light and mass transfer behavior is hindered, caused by the suspension flow of substrates, resulting in low hydrogen production performance. In the paper, shake and lighting supplied strategy was investigated to soften the restrictions of high substrate concentration of corncob to improve the hydrogen yield and light energy conversion. The response surface methodology (RSM) was adopted to optimize the influence of variables on hydrogen production (substrate concentration, light intensity and shake intensity). Results showed that the maximum hydrogen yield of 48 mL/g TS and the maximum light energy conversion efficiency of 11.04% were obtained at the condition of 150 rpm, 6000 Lux and substrate concentration 55.56 g/L, increased by 603.85% and 598.63% than the static condition, respectively. RSM showed the synergistic effect between variables significantly affected the hydrogen production performance, the optimal enhancement strategies were: shake intensity 153.33 rpm, light intensity 6155.56 Lux and substrate concentration 57.71 g/L. 4.71% error of the predicted cumulative hydrogen yield (490.41 mL) and the actual cumulative hydrogen yield (468.34 mL) indicating the fitting effect of the model was satisfactory.

Surfactant assisted microwave irradiation pretreatment of corncob: Effect on hydrogen production capacity, energy consumption and physiochemical structure

The combination pretreatment strategy is an effective way to intensify photo-fermentative biohydrogen production (PFHP) process. In this study, the synergistic effects of microwave irradiation and surfactants on the hydrogen production performance, energy analysis and structural characteristics was evaluated. Results revealed that hydrogen production performance was improved after microwave irradiation pretreatment (MIP) and surfactants assisted microwave irradiation pretreatment (SMIP). SMIP group had a higher cumulative hydrogen yield (CHY) of 367.87 ± 6.481 mL compared with control group (223.26 ± 4.329 mL) and MIP group (303.66 ± 3.366 mL), which was an increase of 36.01% and 64.77%, respectively. Energy evaluation analysis showed that the energy ratio of SMIP (0.49) was higher than that of MIP (0.37) in the PFHP system, therefore, SMIP can save more energy. After SMIP, the corncob lignocellulose structure was greatly damaged, which was verified by SEM, FTIR, XRD and XPS analyses.

Enhancement effect of defoamer additives on photo-fermentation biohydrogen production process

Foaming is a key issue should be solved in the process of photo-fermentation biohydrogen production (PFHP), since it has negative influence on the hydrogen yield potential, especially when taken straw as substrate. Appropriate foam control measures must be considered for industrialization. Hence, in this work, foam height and biohydrogen yield were selected as index, the effect of defoamer addition on PFHP was investigated. The defoamer has no negative effect on bacterial growth. In the addition range of 0–1 mL/L, the higher addition amount, indicates better foam control effect. The maximum foam height could be reduced by 55% and the foam existence time by 36 h. The reduction of foam was beneficial to biohydrogen production, and the highest cumulative hydrogen yield was increased 23% at the addition level of 0.125 mL/L.

Surfactants-induced photo-fermentative biohydrogen production from corncob

Surfactants could improve the mass transfer capacity by avoiding agglomeration and sedimentation of substrate. This study evaluated the effects of diverse Tween series surfactants on hydrogen production performance of photo-fermentative biohydrogen production (PFHP) process. Tween 80 was found to be the most suitable surfactant. The maximum cumulative hydrogen yield (CHY) reached 49.38 ± 1.90 mL/g TS under 0.20% (v/v) Tween 80 addition. Highest energy recovery efficiency of 3.41 ± 0.13% and substrate conversion efficiency of 94.93 ± 0.44% were obtained, which was 50.37% and 1.7% higher than that of the control group, respectively. The effect of diverse Tween series surfactants on photosynthetic bacteria (PSB) was further studied. Results showed that Tween 80 significantly improved the growth and activity of PSB. The modified Han-Levenspiel model was adopted to analyze the effects of Tween 80 addition on PFHP. Results indicated that the reaction system was non-competitive inhibition, the predicted critical concentration of Tween 80 was 0.42% (v/v). This study provides a way to increase the CHY of corncob by the PFHP process.

Photo fermentative biohydrogen production potential using microalgae-activated sludge co-digestion in a sequential flow batch reactor (SFBR).

Biohydrogen (bioH2) is a sustainable energy source that can produce carbon-free energy upon combustion. BioH2 can be generated from microalgae by photolytic and anaerobic digestion (AD) pathways. The AD pathway faces many challenges when scaling up using different bioreactors, particularly the continuous stirred tank reactor (CSTR) and sequential flow batch reactor (SFBR). Therefore, the performance characteristics of SFBR were analysed in this study using Chlorella vulgaris and domestic wastewater activated sludge (WWAS) co-culture. An organic loading rate (OLR) of 4.7 g COD L-1 day-1 was fed to the SFBR with a hydraulic retention time (HRT) of five days in the presence of light under anaerobic conditions. The pH of the medium was maintained at 6 using a pH controller for the incubation period of 15 days. The maximum bioH2 concentrations of 421.1 μmol L-1 and 56.6 μmol L-1 were observed in the exponential and steady-state phases, respectively. The effluent had an unusually high amount of acetate of 16.6 g L-1, which remained high with an average of 11.9 g L-1 during the steady state phase. The amount of bioH2 produced was found to be inadequate but consistent when operating the SFBR with a constant OLR. Because of the limitations in CSTR handling, operating a SFBR by optimizing OLR and HRT might be more feasible in operation for bioH2 yield in upscaling. A logistic function model was also found to be the best fit for the experimental data for the prediction of bioH2 generation using co-culture in the SFBR.

Synergetic Effect Evaluation of Light and Mass Transfer Enhancement Strategies on Photo Fermentative Biohydrogen Production Process: Illumination, Oscillation, and High Solid Level

Synergetic Effect Evaluation of Light and Mass Transfer Enhancement Strategies on Photo Fermentative Biohydrogen Production Process: Illumination, Oscillation, and High Solid Level

Optimization of Photo-Fermentation Bio-Hydrogen Production by Hau-M2 Photosynthetic Hydrogen Producing Bacteria Using Genetic Algorithm Optimized Neural Network

Optimization of Photo-Fermentation Bio-Hydrogen Production by Hau-M2 Photosynthetic Hydrogen Producing Bacteria Using Genetic Algorithm Optimized Neural Network

Enhancing photo-fermentative biohydrogen production using different zinc salt additives

The kinetic properties of the hydrogen yield of photosynthetic bacteria were investigated using Han–Levenspiel and modified Gompertz models to determine the effects of different zinc salts on the growth and hydrogen production of the photosynthetic bacterium HAU-M1. Inorganic zinc salts (zinc standard solution and zinc sulfate) inhibited bacterial growth by 1–4-fold higher than organic zinc salts (zinc lactate and zinc gluconate). Among these four zinc salts, 5 mg/L zinc lactate displayed the weakest inhibition performance. This compound increased cumulative hydrogen production by approximately 57.81% (80.44 mL/g) and maximum hydrogen production rate by 58.27% (3.43 mL/[g·h]). The Han–Levenspiel model with parameters m > n > 0 indicated that the addition of zinc salts influenced the hydrogen production process of the bacterium in a noncompetitive manner. Compared with the inorganic zinc, the organic zinc salts were more suitable as exogenous zinc supplements to promote bacterial growth and its hydrogen production.

Enhancing photo-fermentation biohydrogen production from corn stalk by iron ion

This study aimed to investigate the enhancement of iron ion on growth, metabolic pathway, and biohydrogen production performance of biohydrogen producing bacteria HAU-M1. Different concentrations of Fe2+ and Fe3+ were respectively added into fermentation broth of photo-fermentation biohydrogen production (PFHP) from corn stalk. Regular sampling test was used to measure the characteristics of fermentation broth and gas, metabolic pathway, energy conversion efficiency, and kinetic of PFHP. The analysis of experimental data showed that the maximum hydrogen yield of 70.25 mL/g was observed at 2500 μmol/L Fe2+ addition, with an energy conversion efficiency of 5.21%, which was 19.98% higher over no-addition. However, the maximum hydrogen content of 51.41% and the maximum hydrogen production rate of 17.82 mL/h were observed at 2000 μmol/L Fe2+ addition. The experimental results revealed that iron ion played a key role in PFHP, which provided a technical support for improving the performance of PFHP.