Photoelectrochemical Reaction Research Articles

Introducing Platinum Nanoparticles on Inorganic/Organic Nanoheterostructures for Enhancing their Efficiency toward the Photoelectrochemical Urea Oxidation Reaction

Introducing Platinum Nanoparticles on Inorganic/Organic Nanoheterostructures for Enhancing their Efficiency toward the Photoelectrochemical Urea Oxidation Reaction

Elementary Reaction Steps That Precede or Follow a Unimolecular Reaction Step Can Obfuscate Interpretation of the Driving-Force Dependence to Its Rate Constant.

Assessing the validity of a driving-force-dependent kinetic theory for a unimolecular elementary reaction step is difficult when the observed reaction rate is strongly influenced by properties of the preceding or following elementary reaction step. A well-known example occurs for bimolecular reactions with weak orbital overlap, such as outer-sphere electron transfer, where bimolecular collisional encounters that precede a fast unimolecular electron-transfer step can limit the observed rate. A lesser-appreciated example occurs for bimolecular reactions with stronger orbital overlap, including many proton-transfer reactions, where equilibration of an endergonic unimolecular proton-transfer step results in a relatively small concentration of reaction products, thus slowing the rate of the following step such that it becomes rate limiting. Incomplete consideration of these points has led to discrepancies in interpretation of data from the literature. Our reanalysis of these data suggests that proton-transfer elementary reaction steps have a nonzero intrinsic free energy barrier, implying, in the parlance of Marcus theory, that there is non-negligible nuclear reorganization. Outcomes from our analyses are generalizable to inner-sphere electron-transfer reactions such as those involved in (photo)electrochemical fuel-forming reactions.

Facile Semiconductor p–n Homojunction Nanowires with Strategic p-Type Doping Engineering Combined with Surface Reconstruction for Biosensing Applications

HighlightsA novel photoelectrochemical (PEC) photosensor composed of GaN nanowire-on-Si platform demonstrates record-high responsivity of 247.8 mA W−1 with ultra-stable operation characteristics.Strategic internal and external band structure engineering of semiconductor nanowires promotes efficient PEC reaction via controlling carrier dynamics while preserving nanowires from material degradation.The glucose sensing system is constructed to successfully analyze blood glucose levels in real human serum samples, featuring a high sensitivity of 0.173 µA µM−1 cm−2 and a low detection limit of 0.07 µM.

Steering Electron–Hole Migration Pathways from Plasmon-Induced Resonance Energy Transfer in Hematite to Enhance Their Photoelectrochemical Water Splitting

The strategy of Plasmon-Induced Resonance Energy Transfer (PIRET) holds promise in mitigating the recombination of photo-generated electron-hole pairs, thereby amplifying the efficiency of an electrode in photoelectrochemical (PEC) reactions geared towards solar-driven PEC. Nevertheless, the PIRET mechanism, particularly from the view of charge separation and extraction dynamics, remains unclear. Herein, we examined PEC water splitting activities of Au nanoparticles decorated α-Fe2O3 nanoarrays (α-Fe2O3/Au NRs) and systematically investigated the PIRET mechanism by the combination of ultraviolet-visible spectra, field distribution simulation, and transient absorption spectroscopy. The PIRET effect of Au nanoparticles (NPs) generates a localized electromagnetic field near the surface of the α-Fe2O3 NRs and the significant near-field coupling between α-Fe2O3 NRs and Au NPs promotes cross-sectional absorption that markedly enhances plasmonic energy transfer from Au NPs to α-Fe2O3 NRs. TA measurement uncovers the proximate electric field around α-Fe2O3 NRs, which emanates from the Au NPs' PIRET, orchestrates the instantaneous segregation of electrons and holes upon their formation and births enduring photogenerated holes in α-Fe2O3/Au NRs. Additionally, the FeOOH overlayers, as cocatalyst, are effective in boosting hole transfer kinetics. Consequently, the photocurrent density exhibited by the α-Fe2O3/Au/FeOOH arrays is amplified by 3.5 times in comparison to the pristine α-Fe2O3 NR arrays.

Photoelectrochemical CO2 reduction in Tandem Photoelectrode Cells: Interpretation of Apparent Photocurrents

Photoelectrochemical reactors harness solar energy to accelerate heterogeneous chemical reactions and reduce power consumption for a given reaction rate. The tandem photoelectrochemical cell design presented here employs a light penetrable TiO2 photoanode||Cu2O photocathode configuration that enables carbon dioxide turnover at limited cell voltages. During polarization tests, the tandem configuration demonstrated a photocurrent density of 0.2 mA/cm2 at a cell voltage of -2.6 V. That is 2-fold higher than the photocurrent density obtained with a solo photoanode (Cu||TiO2) and five orders of magnitude higher compared to the solo photocathode (Cu2O||Ni) design. Moreover, electrolysis under illumination (photoelectrolysis) showed a current density increase of 3.9 mA/cm2 with respect to electrolysis in the dark. However, this photocurrent density was merely apparent and was caused by light-triggered changes in the surface morphology and phase of Cu2O, which in turn affected the catalytic response. Moreover, the apparent partial ethylene photocurrent density and total partial current density during photoelectrolysis was 44%, the highest among the detected products. That selectivity is attributed to the combined effect of Cu2O photoreduction and the associated local pH rise at the electrode-electrolyte interface.

Recycling Waste Melamine-Formaldehyde Resin as a Photocatalytic Enhancer for g-C3N4 Photocatalysts and Application in Photoelectrochemical (PEC) Reactions

Recycling Waste Melamine-Formaldehyde Resin as a Photocatalytic Enhancer for g-C₃N₄ Photocatalysts and Application in Photoelectrochemical (PEC) Reactions

Mesoporous TS-1 zeolite-confined metal oxides photocathode for efficient reduction of carbon dioxide to methanol

Excessive CO2 emission has caused serious environmental problems, and converting CO2 to high value-added fuels is attractive for solving energy and environmental crisis. Herein, a novel mesoporous TS-1(mTS-1) zeolite-confined metal oxides nanoclusters Cu-Bi@mTS-1 was developed for efficient photoelectrochemical reduction reaction of CO2 (PEC CO2RR). The catalyst Cu-Bi@mTS-1 as a photocathode showed high activity, achieving a maximum methanol Faraday efficiency (FECH3OH) of 93.4 % at −0.7 V vs. RHE. The C2 product ethanol could be also detected at higher potentials during PEC CO2RR. In-situ FTIR results indicate the occurrence of key reaction intermediates *CO, *CHO, *OCCO and *COCHO during the conversion of CO2 to CH3OH and CH3CH2OH. It is believed that the hierarchically porous structure of mTS-1 is conducive to the enrichment of CO2 molecules to increase the reactant concentration, also can promote C-C coupling through photoelectric synergism. This work provides a favorable reference for the rational design of photocathodes by confinement effect of porous structure.

Photocatalytic Hydrogen Production for Green Energy

The rapid increase in energy consumption, driven by the rising vehicle population and travel demand, has led to a surge in Greenhouse Gas (GHG) emissions. This necessitates the development of sustainable and eco-friendly technologies and fuels to mitigate global and local environmental impacts. Four primary justifications support transitioning to alternative fuels and technologies: dwindling oil reserves worldwide, adverse environmental effects of vehicle pollution, escalating oil production costs, and the complex challenges of maintaining energy security in international markets. To address these concerns, there is a growing global demand for hydrogen as a sustainable energy source. Utilizing photocatalytic and photoelectrochemical (PEC) water splitting reactions, particularly with graphene quantum dots-based composites, offers promising avenues for efficient and eco-friendly hydrogen generation. The selection of these systems is based on their unique physical and chemical properties, with graphene providing strong support and efficient electron transport, while components like cadmium sulfide (CdS) and zinc oxide (ZnO) enhance light absorption and charge separation. This integrated approach shows potential for efficient and sustainable hydrogen production, further bolstered by advances in metal-containing photocatalysts and collaborative efforts across energy markets.

Rational design of cocatalyst for highly improved ammonia production from photoelectrochemical nitrate reduction

Photoelectrochemical nitrate reduction reaction (p-NO3RR) has been one of the most promising ways for ambient ammonia synthesis. However, current trials haven’t realized efficient ammonia production due to low ammonia yield. Herein, we present that silicon (Si) photocathode with CoNi as co-catalyst can achieve low onset potential, high ammonia yield, and close-to-unity selectivity in p-NO3RR. The optimal photocathode (Co0.95Ni0.05/Si) exhibits a record-high ammonia yield of 2054 µg h−1 cm−2 with an excellent Faraday efficiency (FE) of 98.6% at only −0.1 V vs. reversible hydrogen electrode (RHE), which outperforms reported photocathodes in literature. Our characterizations and calculations demonstrate that the metallic Co dominantly exists as the interior of Co0.95Ni0.05/Si that accelerates electron transfer, while Ni is introduced into Co3O4 on the surface that optimizes the adsorption behavior and improves the activity and selectivity. We believe that the findings provide insightful guidance for enhanced performance towards large-scale ammonia synthesis by photoelectrochemical nitrate reduction.

A coupled faradaic/electrostatic boosting strategy for decolorization of a refractory dye inside a dually-biased photoelectrochemical reactor: Time and energy saving

A green sustainable strategy for environmental remediation and treatment of dye-polluted water is the application/development of effective photoelectrochemical (PEC) reactors. Despite some recent progress in PEC systems, achieving a complete decolorization is still a challenging issue and often requires a long period of reactor operation. Herein, the authors address this interesting time/energy-related problem, demonstrating how without consuming extra electricity/chemicals, fabricating complex photoelectrodes, or changing the pH of medium, one can effortlessly promote the activity of a PEC reactor just by its coupling to a non-faradaic bias source. By applying this novel dually biased (faradaic/electrostatic) boosting strategy, we reveal that decolorization of methyl orange (a refractory dye pollutant) is significantly improved and the decolorization time (thereby energy consumption) is reduced by almost half in comparison to that of a conventional PEC reactor–operating under a single-bias (faradaic) condition. The reactor activity and its photoelectrochemical response are finally discussed in detail in terms of applied potential biases, semiconductor's band bending, open-circuit-potential displacement, electrostatic interaction and electrosorption of dye pollutant.

Perfluorinated Zinc Porphyrin Sensitized Photoelectrosynthetic Cells for Enhanced TEMPO-Mediated Benzyl Alcohol Oxidation.

This research introduces a novel series of perfluorinated Zn(II) porphyrins with positive oxidation potentials designed as sensitizers for photoelectrosynthetic cells, with a focus on promoting the oxidation of benzyl alcohol (BzOH) mediated by the 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) organocatalyst. Three dyes, CLICK-3, CLICK-4, and BETA-4, are meticulously designed to explore the impact of substituents and their positions on the perfluorinated porphyrin ring in terms of redox potentials and energy level alignment when coupled with SnO2/TiO2-based photoanodes and TEMPO mediator. A comprehensive analysis utilizing spectroscopy, electrochemistry, photophysics, and computational techniques of the dyes in solution and sensitized thin films unveils an enhanced charge-separation character in the 4D-π-1A type BETA-4. Incorporating four dimethylamino donor groups at the periphery of the porphyrin ring and a BTD-accepting linker at the β-pyrrolic position equips the structure with a more efficient donor-acceptor system. This enhancement ensures improved light-harvesting capacity, resulting in a doubled incident photon-to-current conversion efficiency (IPCE% ≃30%) in the presence of LiI compared to meso-substituted dyes CLICK-3 and CLICK-4. Sensitizing SnO2/TiO2 thin films with BETA-4 successfully promotes the photooxidation of benzyl alcohol (BzOH) in the presence of the rapid TEMPO radical catalyst, yielding photocurrents of approximately 125 μA/cm2 in an optimized TBPy/LiClO4/ACN electrolyte. Notably, when lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) replaces TBPy as the base for TEMPO-catalyzed BzOH oxidation, a remarkable photocurrent of around 800 μA/cm2 is achieved, marking one of the highest values reported for this photoelectrochemical reaction to date. This study underscores that the proper functionalization of perfluorinated zinc porphyrins positions these dyes as ideal candidates for sensitizing SnO2/TiO2 in the photodriven oxidation of BzOH. It also highlights the crucial role of carefully tuning electrolyte composition based on the electronic properties of molecular sensitizers.

Accelerating photoelectrochemical CO2RR selectively of C2+ products by integrating Ag/Pd cocatalysts on Cu/Cu2O/CuO heterojunction nanorods

The Cu-based photoelectrochemical CO2 reduction reaction (PEC–CO2RR) represents a convenient approach for producing value-added C2+ products, aiming to achieve carbon neutrality by reducing greenhouse gas emissions. However, these reactions typically suffer from limited selectivity. In this work, we fabricate Cu/Cu2O/CuO nanorod (CuR)-based heterojunction architectures integrated with Ag and Pd cocatalysts to boost the selectivity of C2+ products. The proposed Cu/Cu2O/CuO/Ag-Pd (CuR/Ag-Pd) photoelectrodes are used as photocathodes to generate a maximum Faradaic efficiency (FE) of C2+ products exceeding 53% by suppressing the hydrogen evolution reaction (HER). The FE improvement is approximately 22-fold (n-propanol), 12-fold (ethanol), 13-fold (acetaldehyde), and 6-fold (acetate) compared with CuR photoelectrodes operating at a negative applied potential of −1.8 V (vs. reversible hydrogen electrode, RHE). Conversely, the CuR photoelectrodes exhibit a maximum HER rate of ∼86% at −1.8 V (vs. RHE), higher than those of the CuR/Ag (54%) and CuR/Ag-Pd (35%) photoelectrodes. The superior PEC–CO2RR performance of CuR/Ag-Pd photoelectrodes is attributable to the higher electrochemical active surface area (6.7 mF/cm2) and faster charge transfer rate at the electrode/electrolyte interface owing to the presence of cocatalysts. In addition, the CuR/Ag-Pd photoelectrodes exhibit remarkable long-term stability retaining 70% of the initial performance even after a relatively more negative applied potential at −1.2 V. A comprehensive investigation into the changes in surface morphology, crystal structure, and elemental composition after PEC–CO2RR confirms the higher stability of CuR/Ag-Pd photoelectrodes. Thus, this work provides novel perceptions into the development of Cu-based heterojunction photoelectrodes integrated with Ag/Pd cocatalysts for improving the selectivity of C2+ products.

A novel molecularly imprinted photoelectrochemical sensor utilizing Ag/SnO2 for the highly sensitive and selective detection of 2,4-dichlorophenoxyacetic acid

The pervasive use of herbicides in agriculture has necessitated the development of sensitive and selective detection methods for environmental monitoring. In this work, a novel photoelectrochemical sensor based on molecular imprinting technology was engineered to specifically detect 2,4-dichlorophenoxyacetic acid (2,4-D) using an Ag/SnO2 composite. The SnO2 was chosen as the photoelectric material due to its abundant surface defects, excellent thermal stability, and high electron carrier density, which are essential for enhanced photoelectrochemical reactions. The introduction of Ag to the SnO2 matrix exploited the surface plasmon resonance effect to bridge its wide band gap, thereby improving the photoelectric conversion efficiency. This Ag/SnO2 composite was then deposited onto an indium tin oxide (ITO) substrate to utilize its high conductivity and optical transparency, followed by the strategic layering of molecularly imprinted polymers (MIPs) that offer selective recognition sites for 2,4-D. To ensure the robustness of the sensor, a Nafion solution was meticulously applied dropwise, which served to immobilize the MIPs/Ag/SnO2 complex on the ITO surface and enhance the sensor's durability. Under optimized conditions, the sensor exhibited a broad linear detection range from 3 × 10-12 to 3 × 10-5 mol/L and a low detection limit of 1.13 × 10-12 mol/L (S/N = 3). The sensor also demonstrated exceptional performance in the analysis of 2,4-D in complex matrices, such as milk, tap water, and beef, highlighting its potential for practical applications in the accurate monitoring of herbicide contamination. These findings affirm the sensor's superior photoelectrochemical properties and introduce an innovative method for the sensitive detection of 2,4-D in environmental and food samples.

Bromine generation on various photoanodes: α-Fe2O3, Fe2TiO5, WO3 and TiO2

The competitive photoelectrochemical reactions bromide vs. water (photo)oxidation in an acidic medium (pH = 1.7) were studied on four semiconducting oxides viz. hematite (α-Fe2O3), pseudobrookite (Fe2TiO5), tungsten trioxide (WO3) and titanium dioxide (TiO2). The experiments were carried out with thin film electrodes on conductive substrates (FTO/glass) in a vigorously stirred batch reactor under AM1.5 irradiation. Electrical bias was applied to the electrodes, exclusively promoting valence band processes leading to oxidative pathways. The initial Faradaic efficiency (FE0) for bromine generation was determined by chemical analysis (UV-Vis absorbance) of the electrolytes. The semiconducting materials used as photoanodes showed a similar ability to oxidize bromide to bromine. For 0.02 M sodium bromide, a Faradaic efficiency of 100% was obtained for α-Fe2O3, WO3 and TiO2, while the highest value for pseudobrookite was 90%. From further analysis, as to competition kinetics, the ratio of the rate constants of water oxidation and bromide oxidation, vH2O / kox, was estimated. α-Fe2O3 was the most successful compound among the studied semiconductors.

Frontiers in Photoelectrochemical Catalysis: A Focus on Valuable Product Synthesis.

Photoelectrochemical (PEC) catalysis provides the most promising avenue for producing value-added chemicals and consumables from renewable precursors. Over the last decades, PEC catalysis, including reduction of renewable feedstock, oxidation of organics, and activation and functionalization of C─C and C─H bonds, are extensively investigated, opening new opportunities for employing the technology in upgrading readily available resources. However, several challenges still remain unsolved, hindering the commercialization of the process. This review offers an overview of PEC catalysis targeted at the synthesis of high-value chemicals from sustainable precursors. First, the fundamentals of evaluating PEC reactions in the context of value-added product synthesis at both anode and cathode are recalled. Then, the common photoelectrode fabrication methods that have been employed to produce thin-film photoelectrodes are highlighted. Next, the advancements are systematically reviewed and discussed in the PEC conversion of various feedstocks to produce highly valued chemicals. Finally, the challenges and prospects in the field are presented. This review aims at facilitating further development of PEC technology for upgrading several renewable precursors to value-added products and other pharmaceuticals.

Quantum Dots Mediated Heterojunction Coupling MoSe2 Photoanode for Photoelectrochemical Water Splitting.

Graphene quantum dots (GQDs) possess the photosensitive absorption for photoelectrochemical hydrogen evolution owing to special band structures, whereas they usually confront with photo-corrosion or undesired charge recombination during photoelectrochemical reactions. Hence, we establish the heterojunction between GQDs and MoSe2 sheets via a hydrothermal process for improved stability and performance. Photoanodic water splitting with hydrogen evolution boosted by the heteroatom doped N,S-GQDs/MoSe2 heterojunction has been attained due to the abundant active sites, promoted charge separation and transfer kinetics with reduced energy barriers. Diphasic 1T and 2H MoSe2 sheet-hybridized quantum dots contribute to the Schottky heterojunction, which can play a key role in expedited carrier transport to inhibit accumulative photo-corrosion and increase photocurrent. Heteroatom dopants lead to favored energy band matching, bandgap narrowing, stronger light absorption and high photocurrent density. The external quantum efficiency of the doped heterojunction has been elevated twofold over that of the non-doped pristine heterojunction. Modification of the graphene quantum dots and MoSe2 heterojunction demonstrate a viable and adaptable platform toward photoelectrochemical hydrogen evolution processes.

Engineering Surface Passivation and Hole Transport Layer on Hematite Photoanodes Enabling Robust Photoelectrocatalytic Water Oxidation.

Regulation of charge transport at the molecular level is essential to elucidating the kinetics of junction photoelectrodes across the heterointerface for photoelectrochemical (PEC) water oxidation. Herein, an integrated photoanode as the prototype was constructed by use of a 5,10,15,20-tetrakis(4-carboxyphenyl) porphyrin-cobalt molecule (CoTCPP) and ZnO on hematite (α-Fe2O3) photoanode. CoTCPP molecules serve as a typical hole transport layer (HTL), accelerating the transport of the photogenerated holes to oxygen evolution cocatalysts (OECs). Meanwhile, ZnO as the surface passivation layer (SPL) can passivate the interfacial state and reduce the level of electron leakage from hematite into the electrolyte. After the integration of OECs, the state-of-the-art α-Fe2O3/ZnO/CoTCPP/OECs photoanode exhibits a distinguished photocurrent density and excellent stability in comparison with pristine α-Fe2O3. The simultaneous incorporation of a ZnO and CoTCPP dual interlayer can effectively modulate the interfacial photoinduced charge transfer for PEC reaction. This work provides in-depth insights into interfacial charge transfer across junction electrodes and identifies the critical roles of solar PEC conversion.

Enhanced Charge Carrier Dynamics on Sb2 Se3 Photocathodes for Efficient Photoelectrochemical Nitrate Reduction to Ammonia.

Ammonia (NH3 ) is recognized as a transportable carrier for renewable energy fuels. Photoelectrochemical nitrate reduction reaction (PEC NO3 RR) offers a sustainable solution for nitrate-rich wastewater treatment by directly converting solar energy to ammonia. In this study, we demonstrate the highly selective PEC ammonia production from NO3 RR by constructing a CoCu/TiO2 /Sb2 Se3 photocathode. The constructed CoCu/TiO2 /Sb2 Se3 photocathode achieves an ammonia Faraday efficiency (FE) of 88.01 % at -0.2 VRHE and an ammonia yield as high as 15.91 μmol h-1 cm-2 at -0.3 VRHE with an excellent onset potential of 0.43 VRHE . Dynamics experiments and theoretical calculations have demonstrated that the CoCu/TiO2 /Sb2 Se3 photocathode possesses high light absorption capacity, excellent carrier transfer capability, and high charge separation and transfer efficiencies. The photocathode can effectively adsorb the reactant NO3 - and intermediate, and the CoCu co-catalyst increases the maximum Gibbs free energy difference between NO3 RR and HER. Meanwhile, the Co species enhances the spin density of Cu, and increases the density of states near the Fermi level in pdos, which results in a high PEC NO3 RR activity on CoCu/TiO2 /Sb2 Se3 . This work provides a new avenue for the feasibility of efficient PEC ammonia synthesis from nitrate-rich wastewater.

Enhanced Charge Carrier Dynamics on Sb2Se3 Photocathodes for Efficient Photoelectrochemical Nitrate Reduction to Ammonia

AbstractAmmonia (NH3) is recognized as a transportable carrier for renewable energy fuels. Photoelectrochemical nitrate reduction reaction (PEC NO3RR) offers a sustainable solution for nitrate‐rich wastewater treatment by directly converting solar energy to ammonia. In this study, we demonstrate the highly selective PEC ammonia production from NO3RR by constructing a CoCu/TiO2/Sb2Se3 photocathode. The constructed CoCu/TiO2/Sb2Se3 photocathode achieves an ammonia Faraday efficiency (FE) of 88.01 % at −0.2 VRHE and an ammonia yield as high as 15.91 μmol h−1 cm−2 at −0.3 VRHE with an excellent onset potential of 0.43 VRHE. Dynamics experiments and theoretical calculations have demonstrated that the CoCu/TiO2/Sb2Se3 photocathode possesses high light absorption capacity, excellent carrier transfer capability, and high charge separation and transfer efficiencies. The photocathode can effectively adsorb the reactant NO3− and intermediate, and the CoCu co‐catalyst increases the maximum Gibbs free energy difference between NO3RR and HER. Meanwhile, the Co species enhances the spin density of Cu, and increases the density of states near the Fermi level in pdos, which results in a high PEC NO3RR activity on CoCu/TiO2/Sb2Se3. This work provides a new avenue for the feasibility of efficient PEC ammonia synthesis from nitrate‐rich wastewater.

High‐performance Photoelectrochemical Hydrogen Production Using Asymmetric Quantum Dots

AbstractSolar‐driven photoelectrochemical (PEC) reactions using colloidal quantum dots (QDs) as photoabsorbers have shown great potential for the production of clean fuels. However, the low H2 evolution rate, consistent with low values of photocurrent density, and their limited operational stability are still the main obstacles. To address these challenges, the heterostructure engineering of asymmetric capsule‐shaped CdSe/CdxZn1‐xSe QDs with broad absorption and efficient charge extraction compared to pure‐shell QDs is reported. By engineering the shell composition from pure ZnSe shells into CdxZn1‐xSe gradient shells, the electron transfer rate increased from 4.0 × 107 s−1 to 32.7 × 107 s−1. Moreover, the capsule‐shaped architecture enables more efficient spatial carrier separation, yielding a saturated current density of average of 25.4 mA cm−2 under AM 1.5 G one sun illumination. This value is the highest ever observed for QDs‐based devices and comparable to the best‐known Si‐based devices, perovskite‐based devices, and metal oxide‐based devices. Furthermore, PEC devices based on heterostructured QDs maintained 96% of the initial current density after 2 h and 82% after 10 h under continuous illumination, respectively. The results represent a breakthrough in hydrogen production using heterostructured asymmetric QDs.