Photoelectrochemical Aptasensor Research Articles

Self-powered photoelectrochemical aptasensor for fumonisin B1 detection based on a Z-scheme ZnIn2S4/WO3 photoanode

The incidence of esophageal cancer is positively associated with fumonisin contamination. It is necessary to develop methods for the rapid detection of fumonisins. In this work, a self-powered photoelectrochemical aptamer sensor based on ZnIn2S4/WO3 photoanode and Au@W–Co3O4 photocathode is proposed for the sensitive detection of fumonisin B1 (FB1). Among them, under visible light irradiation, the Z-type heterostructure of ZnIn2S4/WO3 acts as a photoanode to improve the electron transfer rate, which contributes to the enhancement of the photocathode signal and lays the foundation for a wider detection range. The Au@W–Co3O4 photocathode as a sensing interface reduces the probability of false positives (comparison of anode sensing platforms). The PEC sensor has a good working performance in the detection range (10 pg/mL-1000 ng/mL) with a detection limit of 2.7 pg/mL (S/N = 3). In addition, the sensor offers good selectivity, stability and excellent recoveries in real sample analysis. This work is expected to play a role in the field of analyzing environmental toxins.

Near-infrared light-driven lab-on-paper cathodic photoelectrochemical aptasensing for di(2-ethylhexyl)phthalate based on AgInS2/Cu2O/FeOOH photocathode

Di(2-ethylhexyl)phthalate (DEHP) is commonly released from plastics in aqueous environment, which can disrupt endocrine system and cause adverse effects on public health. There is a pressing need to highly sensitive detect DEHP. Herein, a near-infrared (NIR) light-driven lab-on-paper cathodic photoelectrochemical aptasensing platform integrated with AgInS2/Cu2O/FeOOH photocathode and “Y”-like ternary conjugated DNA nanostructure-mediated “ON-OFF” catalytic switching of hemin monomer-to-dimer was established for ultrasensitive DEHP detection. Profiting from the collaborative roles of the effective photosensitization of NIR-response AgInS2 and the fast hole extraction of FeOOH, the NIR light-activated AgInS2/Cu2O/FeOOH photocathode generated a markedly enhanced photocathodic signal. The dual hemin-labelled “Y”-like ternary conjugated DNA nanostructures made the hemin monomers separated in space and they maintained highly active to catalyze in situ generation of electron acceptors (O2). The hemin monomers were relocated in close proximity with the help of target-induced allosteric change of DNA nanostructures, which could spontaneously dimerize into catalytically inactive hemin dimers and fail to mediate electron acceptors generation, resulting in a decreased photocathodic signal. Therefore, the ultrasensitive DEHP detection was realized with a linear response range of 1 pM–500 nM and a detection limit of 0.39 pM. This work rendered a promising prototype to construct powerful paper-based photocathodic aptasensing system for sensitive and accurate screening of DEHP in aqueous environment.

Integration of high-entropy nanozyme and hollow In2S3 nanotube heterostructures decorated with WO3 for ultrasensitive PEC aptasensing of highly toxic mycotoxin

As a highly toxic mycotoxin, patulin threatens human and animal health. Herein, a new signal amplification strategy was designed for photoelectrochemical (PEC) analysis of patulin based on nanotube-like In2S3/WO3 heterostructures with the assistance of PtRuFeCoW high-entropy alloy nanorods (HEANRs). Specifically, the prominent photoactivity of the In2S3/WO3 was investigated by UV−vis diffuse reflectance and photoluminescence spectroscopy, coupled by elaborating the photoelectron transport mechanism in detail. Simultaneously, the excellent peroxidase-like activity of the PtRuFeCoW HEANRs was certificated mainly by UV–vis absorption spectroscopy. On such foundation, the PtRuFeCoW HEANRs modified capture DNA was cast onto the In2S3/WO3 based photoanode for catalyzing 4-chloro-1-naphthol (4-CN) oxidation to form insoluble benz-4-chloro-hexadienone (4-CD) precipitate in the presence of H2O2, ultimately weakening the PEC currents. The resulting PEC sensor exhibited a wider detection range from 0.1 pg mL−1 to 500 ng mL−1 and a lower detection limit was down to 0.063 pg mL−1 (S/N = 3). The HEANRs nanozyme assisted PEC method holds great promise for ultrasensitive detection of environmental pollutants in practice.

Enhancing the photoelectric performance of TiO2-based heterojunction using the hydrothermal decomposition of MIL-125 strategy for sensitive detection of Bisphenol A

Due to its outstanding conductive properties, TiO2-based heterojunctions have extensive applications in the field of photoelectrochemical sensors. However, due to surface energy and van der Waals forces, TiO2 tends to aggregate and presents an uneven distribution, which reduces the overall performance of these heterostructures. To overcome these challenges and achieve a uniform distribution of TiO2 within the heterojunction, the characteristic of gradual decomposition of the metal-organic framework MIL-125 under hydrothermal conditions was employed. This process gradually generates TiO2 particles that slowly participate in the construction of the heterojunction. By combining the exceptional light absorption properties and appropriate bandgap widths of CdS and CdIn2S4, a uniformly distributed flower-globular ternary heterojunction CdS/CdIn2S4/TiO2-FG was successfully synthesized. In comparison to the disordered heterojunction CdS/CdIn2S4/TiO2-DO, CdS/CdIn2S4/TiO2-FG exhibits enhanced visible light absorption properties and photoelectric conversion efficiency. Taking Bisphenol A (BPA) as a model, a signal-off photoelectrochemical (PEC) aptasensor based on the CdS/CdIn2S4/TiO2-FG was established and exhibited a high sensitive detection for BPA with a linear response range from 10−1 to 107 pM, as well as an ultralow detection limit of 0.015 pM, revealing vivid selectivity, stability, and reproducibility. Therefore, this study offers an efficient and straightforward approach for the preparation of TiO2-based heterojunctions with superior photoelectric activity.

Enhanced sensitivity for Aflatoxin B1 detection in food through a h-Zn1Cd5S-based photoelectrochemical aptasensor

Designing photoelectrochemical sensors for detecting ultra-trace amounts of Aflatoxin B1 (AFB1) in complex samples poses a significant challenge. In pursuit of this objective, we engineered hollow-structured ZnCdS (denoted as h-Zn1Cd5S) material and applied an electrodeposition method to introduce Au nanoparticles (AuNPs) on the surface. This approach resulted in a significant enhancement of the photocurrent response of the photoelectrode, attributed to the synergistic effects of the hollow structure and surface plasmon resonance, thereby underscoring its potential for advanced applications. Utilizing density functional theory, we computed the transfer route and energy band formation of photogenerated electrons. Subsequently, we developed an AFB1 photoelectrochemical (PEC) aptasensor based on the competition mechanism, coupled with aptamer probe technology. This aptasensor allows for the ultra-trace determination of AFB1, exhibiting a remarkable detection limit as low as 1.32 fg/mL and a linear range from 1.0 × 10−2 to 100.0 pg/mL. The PEC aptasensor for AFB1 demonstrates excellent sensitivity and selectivity. When applied to the detection of AFB1 in Tsaoko, wheat, and corn samples, its performance aligns closely with high-performance liquid chromatography (HPLC) results, validating its applicability for analyzing real-world samples.

Synergistic signal amplification of ultrathin nanowire-like PtCoFeRuMo high-entropy nanozyme and Z-scheme WO3/ZnIn2S4 heterostructure for split-typed photoelectrochemical aptasensing of myoglobin

Enzyme-initiated sensing strategy has wide applications in photoelectrochemical (PEC) analysis for its high specificity and excellent catalytic efficiency. Herein, ultrathin PtCoFeRuMo high-entropy alloy nanowires (PtCoFeRuMo HEANWs) were prepared by a simple solvothermal method, whose peroxidase-like (POD-like) catalytic property was critically investigated by tetramethylbenzidine (TMB) oxidation in the presence of H2O2. Simultaneously, Z-scheme WO3/ZnIn2S4 heterostructures (labeled WO3/ZnIn2S4) were constructed under solvothermal treatment, whose optical properties and photoactivity were rigorously studied by a set of techniques, combined by elaborating the interfacial charge transfer mechanism. On such foundation, a split-typed PEC aptasensor was established with the WO3/ZnIn2S4 substrate, whose detection signals were further magnified through catalytic oxidation of 3-amino-9-ethylcarbazole (AEC) initiated by the PtCoFeRuMo HEANWs. The resultant PEC sensor realized excellent bioanalysis of biomarker myoglobin, showing a broader linear range from 1.0 × 10−2 to 1.0 × 105 pg mL−1 and a lower limit of detection (0.96 fg mL−1, S/N = 3). This split-typed PEC biosensing strategy shows substantial promise in bioanalysis and clinical diagnosis.

Photoelectrochemical sensing of isoniazid and streptomycin based on metal Bi-doped BiOI microspheres grown on book-shape layers of Ti3C2 heterostructures.

Isoniazid and streptomycin are vital drugs for treating tuberculosis, which are utilized as efficient anti-tuberculosis agents. This paper presentsa novel visible-light-driven composite photocatalyst Ti3C2/Bi/BiOI, which was built from Ti3C2 nanosheets and Bi/BiOI microspheres. Photoelectrochemical (PEC) sensors based on Ti3C2/Bi/BiOI were synthesized for isoniazid identification, which showed a linear concentration range of 0.1-125 μM with a detection limit of 0.05 μM (S/N = 3). Moreover, we designed a PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI to detect streptomycin in 0.1 M PBS covering the electron donor isoniazid, because the isoniazid consumes photogenerated holes thus increasing the photocurrent effectively and preventing photogenerated electron-hole pairs from being recombined. Furthermore, PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI were synthesized for streptomycin identification, which exhibited a linear concentration range of 0.01-1000 nM with a detection limit of 2.3 × 10-3 nM (S/N = 3), and are well stable in streptomycin sensing.

Dual amplification for PEC ultrasensitive aptasensing of biomarker HER-2 based on Z-scheme UiO-66/CdIn2S4 heterojunction and flower-like PtPdCu nanozyme

As an important prognostic indicator in breast cancer, human epithelial growth factor receptor-2 (HER-2) is of importance for assessing prognosis of breast cancer patients, whose accurate and facile analysis are imperative in clinical diagnosis and treatment. Herein, photoactive Z-scheme UiO-66/CdIn2S4 heterojunction was constructed by a hydrothermal method, whose optical property and photoactivity were critically investigated by a range of techniques, combined by elucidating the interfacial charge transfer mechanism. Meanwhile, PtPdCu nanoflowers (NFs) were fabricated by a simple aqueous wet-chemical method, whose peroxidase (POD)-mimicking catalytic activity was scrutinized by representative tetramethylbenzidine (TMB) oxidation in H2O2 system. Taken together, the UiO-66/CdIn2S4 based photoelectrochemical (PEC) aptasensor was established for quantitative analysis of HER-2, where the detection signals were further magnified through catalytic precipitation reaction towards 4-chloro-1-naphthol (4-CN) oxidation (assisted by the PtPdCu NFs nanozyme). The PEC aptasensor presented a broader linear range within 0.1 pg mL−1–0.1 μg mL−1 and a lower limit of detection of 0.07 pg mL−1. This work developed a new PEC aptasensor for ultrasensitive determination of HER-2, holding substantial promise for clinical diagnostics.

A novel photoelectrochemical self-screening aptamer biosensor based on CAU-17-derived Bi2WO6/Bi2S3 for rapid detection of quorum sensing signal molecules

Quorum sensing signal molecule is an important biomarker released by some microorganisms, which can regulate the adhesion and aggregation of marine microorganisms on the surface of engineering facilities. Thus, it is significant to exploit a convenient method that can effectively monitor the formation and development of marine biofouling. In this work, an advanced photoelectrochemical (PEC) aptamer biosensing platform was established and firstly applied for the rapid and ultrasensitive determination of N-(3-Oxodecanoyl)-l-homoserine lactone (3-O-C10-HL) released from marine fouling microorganism Ponticoccus sp. PD-2. The visible-light-driven Bi2WO6/Bi2S3 heterojunction derived from metal-organic frameworks (MOFs) CAU-17 and self-screened aptamer were employed as the photoactive materials and bioidentification elements, respectively. Appropriate amount of MoS2 quantum dots (QDs) conjugated with single-stranded DNA were introduced by hybridization to enhance the photocurrent response of the PEC biosensor. The self-screening aptamer can specifically recognize 3-O-C10-HL, accompanied by increasing the steric hindrance and forcing MoS2 QDs to leave the electrode surface, resulting in an obvious reduction of photocurrent and achieving a dual-inhibition signal amplification effect. Under the optimized conditions, the photocurrent response of PEC aptasensor was linear with 3-O-C10-HL concentration from 1 nM to 10 μM, and the detection limit was as low as 0.26 nM. The detection strategy also showed a high reproducibility, superior specificity and good stability. This work not only provides a simple, rapid and ultrasensitive PEC aptamer biosensing strategy for monitoring quorum sensing signal molecules in marine biofouling, but also broadens the application of MOFs-based heterojunctions in PEC sensors.

Highly efficient photoelectrochemical aptasensor based on CdS/CdTe QDs co-sensitized TiO2 nanoparticles designed for thrombin detection.

A photoelectrochemical (PEC) sensor for the sensitive detection of thrombin (TB) was established. Co-sensitized combination of TiO2 nanoparticles combined with modified cadmium sulfide and cadmium telluride quantum dots (CdS/CdTe QDs) was utilized as a photoactive material. Successful growth of CdS/CdTe quantum dots on mesoporous TiO2 films occuredby successive ion-layer adsorption and reaction. This interesting formation of co-sensitive structure is conducive to enhancing the photocurrent response by improving the use rate of light energy. Additionally, the step-level structure of CdS/CdTe QDs and TiO2 NPs shows a wide range of visible light absorption, facilitating the dissociation of excitons into free electrons and holes. Consequently, the photoelectric response of the PEC analysis platform is significantly enhanced. This constructed PEC aptasensor shows good detection of thrombin with a low detection limit (0.033pM) and a widelinear range (0.0001-100nM) in diluted actual human serum samples. In addition, this PEC aptasensor also has the characteristics of good stability and good reproducibility, which provides a novel insight for the quantitative measurement of other similar analytes.

A photoelectrochemical aptasensor based on double Z-scheme α-Fe2O3/MoS2/Bi2S3 ternary heterojunction for sensitive detection of circulating tumor cells.

A novel photoelectrochemical (PEC) aptasensor based on a dual Z-scheme α-Fe2O3/MoS2/Bi2S3 ternary heterojunction for the ultrasensitive detection of circulating tumor cells (CTCs) was developed. The α-Fe2O3/MoS2/Bi2S3 nanocomposite was prepared via a step-by-step route, and the photoproduced electron/hole transfer path was speculated by conducting trapping experiments of reactive species. α-Fe2O3/MoS2/Bi2S3-modified electrodes exhibited greatly enhanced photocurrent under visible light due to the double Z-scheme charge transfer process, which met the requirement of the PEC sensor for detecting larger targets. After the aptamer was conjugated on the photoelectrode through chitosan (CS) and glutaraldehyde (GA), when MCF-7 cells were presented and captured, the photocurrent of the PEC biosensing system decreased due to steric hindrance. The current intensity had a linear relationship with the logarithm of MCF-7 cell concentration ranging from 10 to 1×105 cellsmL-1, with a low detection limit of 3 cellmL-1 (S/N = 3). The dual Z-scheme α-Fe2O3/MoS2/Bi2S3 ternary heterojunction-modified PEC aptasensor exhibited high sensitivity and excellent specificity and stability. Additionally, MCF-7 cells in human serum were determined by this PEC aptasensor, exhibiting great potential as a promising tool for clinical detection.

Enhanced split-type photoelectrochemical aptasensor incorporating a robust antifouling coating derived from four-armed polyethylene glycol

Antifouling biosensors capable of preventing protein nonspecific adhesion in real human bodily fluids are highly sought-after for precise disease diagnosis and treatment. In this context, an enhanced split-type photoelectrochemical (PEC) aptasensor was developed incorporating a four-armed polyethylene glycol (4A-PEG) to construct a robust antifouling coating, enabling accurate and sensitive bioanalysis. The split-type PEC system involved the photoelectrode and the biocathode, effectively separating signal converter with biorecogniton events. Specifically, the TiO2 electrode underwent sequential modification with ZnIn2S4 (ZIS) and polydopamine (PDA) to form the PDA/ZIS/TiO2 photoelectrode. The cathode substrate was synthesized as a hybrid of N-doped graphene loaded with Pt nanoparticles (NG-Pt), and subsequently modified with 4A-PEG to establish a robust antifouling coating. Following the anchoring of probe DNA (pDNA) on the 4A-PEG-grafted antifouling coating, the biocathode for model target of cancer antigen 125 (CA125) was obtained. Leveraging pronounced photocurrent output of the photoelectrode and commendable antifouling characteristics of the biocathode, the split-type PEC aptasensor showcased exceptional detection performances with high sensitivity, good selectivity, antifouling ability, and potential feasibility.

Polycarboxyl ionic liquid functionalized Yb-MOFs nanoballs based dual-wavelength responsive photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA

Developing an accurate and precise approach for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B1 (AFB1) is significant for food safety surveillance. Herein, a photoelectrochemical sensing platform was constructed based on polycarboxylic ionic liquid functionalized metal-organic framework integrated with gold nanoparticles (Yb-MOFs@AuNPs). Sulfhydryl functionalized hairpin DNA (hDNA) was immobilized on a Yb-MOFs@AuNPs modified glassy carbon electrode (GCE) surface through Au-S bond. After blocking residual active binding sites with BSA, gold nanoparticles-labeled AFB1 aptamer (AuNPs-Apt 1) and gold nanorods-labeled OTA aptamer (AuNRs-Apt 2) were introduced to construct a photoelectrochemical aptasensor for the simultaneous determination of AFB1 and OTA. Due to the surface plasmon resonance effect and the nanometer size effect of gold nanomaterials, the photoelectrochemical aptasensor can output photocurrent responses as being excited with different wavelengths at 520 nm and 808 nm, respectively. When the AFB1 and OTA concentration in the range of 0.001–50.0 ng mL−1, a good linear relationship between the photocurrent difference (ΔI) before and after recognizing targets and the logarithm of AFB1 or OTA concentration was obtained. The detection limits for AFB1 and OTA were 0.40 pg mL−1 and 0.19 pg mL−1, respectively. AFB1 and OTA in corn samples were detected simultaneously by the photoelectrochemical aptasensor.

Target-regulated photoactivities of CdS/Ni-MOF heterojunction with [Ru(bpy)2dppz]2+ intercalator: a bisphenol A photoelectrochemical aptasensor.

Bisphenol A (BPA), an important endocrine disrupting compound, has infiltrated human daily lives through electronic devices, food containers, and children's toys. Developing of novel BPA assay methods with high sensitivity holds tremendous importance in valuing the pollution state. Here, we constructed an ultrasensitive photoelectrochemical (PEC) aptasensor for BPA determinationby regulating photoactivities of CdS/Ni-based metal-organic framework (CdS/Ni-MOF) with [Ru(bpy)2dppz]2+ sensitizer. CdS/Ni-MOF spheres exhibited excellent photocatalytic performance, serving as a potential sensing platform for the construction of target recognition process. [Ru(bpy)2dppz]2+ were embedded into DNA double-stranded structure, functioningas sensitizer formodulating the signal response of the developed PEC aptasensor. The proposed PEC sensor exhibited outstanding analytical performances, including a wide linear range (0.1 to 1000.0nM), low detection limit (0.026nM, at 3σ/m), excellentselectivity, and high stability. This work provides aperspective for the design of ideal photosensitive materials and signal amplification strategies and extends their application in environment analysis.

NIR‐Excitable POM‐Encapsulated Yb‐Bi2S3 Decorated Graphene for Wearable Photoelectrochemical Sensing

AbstractTransition metal sulfides have garnered significant interest in the realm of photoelectrochemical (PEC) sensors due to their remarkable optical and electrical properties. However, their intrinsic UV–vis adsorption and electron‐donor consumption severely hinder their nonirritating and in situ epidermal PEC applications. Herein, a NIR‐808 nm light‐excited heterojunction, phosphomolybdic acid‐encapsulated ytterbium‐doped bismuth sulfide (Yb‐Bi2S3/PMA), is synthesized by hydrothermal method for self‐sufficient electron donor‐based PEC sensing. Further, the Yb‐Bi2S3/PMA heterojunction is decorated on flexible and integrated laser‐induced graphene electrode arrays, providing ultrafast charge carrier transfer capacity and robust mechanical durability (300 bending cycles) for subsequent wearable PEC sensing. As a showcase, the aptamer molecular recognition‐based wearable PEC sensor for sweat trace Neuropeptide Y (NPY, a stress or depression biomarker) presents an ultra‐low detection limit (0.39 fM) and good anti‐interference ability. Moreover, the integration of wearable PEC aptasensor with signal processing and wireless communication facilitates nonirritating and in situ analysis of sweat trace NPY dynamics in various real scenarios (feeding behaviors, physiological stress, and circadian rhythm). More broadly, this research establishes the foundation for NIR‐excitable semiconductors equipped with self‐sufficient electron donor capabilities, unlocking the potential for ultrasensitive wearable PEC sensing applications.

Oxygen Vacancies-Induced Antifouling Photoelectrochemical Aptasensor for Highly Sensitive and Selective Determination of α-Fetoprotein.

Accurate measurement of cancer markers in urine is a convenient method for tumor monitoring. However, the concentration of cancer markers in urine is so low that it is difficult to achieve their measurement. Photoelectrochemical (PEC) sensors are a promising technology to realize the detection of trace cancer markers due to their high sensitivity. Currently, the interference of nonspecific biomolecules in urine is the main reason affecting the high sensitivity and selectivity of PEC sensors in detecting cancer markers. In this work, a strategy of oxygen vacancy (OV) modulation is proposed to construct a fouling-resistant PEC aptamer sensing platform for the detection of α-fetoprotein (AFP), a liver cancer marker. The introduction of OVs induces the formation of intermediate localized states in the photoelectric material, which not only facilitates the separation of photogenerated carriers but also leads to the redshift of the light absorption edge. More importantly, OVs with positive electrical properties can be employed to modify the antifouling layer (C-PEG) with negatively charged groups through an electrostatic interaction. The synergistic effect of OVs, antifouling layer, and aptamer resulted in a TiO2/OVs/C-PEG-based PEC sensor achieves a wide linear range from 1 pg/mL to 100 ng/mL and a low detection limit of 0.3 pg/mL for AFP. In addition, the sensor successfully realized the determination of AFP in urine samples and accurately differentiated between normal people and liver cancer patients in the early and advanced stages. This project is of great significance in advancing the application of photoelectrochemical bioanalytical technology to achieve the detection of cancer markers in urine by investigating the construction of an OVs-regulated fouling-resistant sensing interface.

Click Conjugation of Zwitterionic Peptide with DNA Strand: An Efficient Antifouling Strategy for Versatile Photoelectrochemical Aptasensor.

Advanced antifouling biosensors have garnered considerable attention for their potential for precise and sensitive analysis in complex human bodily fluids. Herein, a pioneering approach was utilized to establish a robust and versatile photoelectrochemical aptasensor by conjugating a zwitterionic peptide with a DNA strand. Specifically, the branched zwitterionic peptide (BZP) was efficiently linked to complementary DNA (cDNA) through a click reaction, forming the BZP-cDNA conjugate. This intriguing conjugate exploited the BZP domain to create an antifouling biointerface, while the cDNA component facilitated subsequent hybridization with probe DNA (pDNA). To advance the development of the aptasensor, an upgraded PDA/HOF-101/ZnO ternary photoelectrode was designed as the signal converter for the modification of the BZP-cDNA conjugate, while a bipyridinium (MCEPy) molecule with strong electron-withdrawing properties was labeled at the front end of the pDNA to form the pDNA-MCEPy signal probe. Targeting the model of mucin-1, a remarkable enhancement in the photocurrent signal was achieved through exonuclease-I-aided target recycling. Such an engineered zwitterionic peptide-DNA conjugate surpasses the limitations imposed by conventional peptide-based sensing modes, exhibiting unique advantages such as versatility in design and capability for signal amplification.

A photoelectrochemical aptasensor for omethoate determination based on a photocatalysis of CeO2@MnO2 heterojunction for glucose oxidation

In the present work, we developed a photoelectrochemical aptasensor to determine omethoate (OMT) based on the dual signal amplification of CeO2@MnO2 photocatalysis for glucose oxidation and exonuclease I-assisted cyclic catalytic hydrolysis. CeO2@MnO2 heterojunction material prepared by hydrothermal method was linked with captured DNA (cDNA) and then assembled on the ITO conductive glass to form ITO/CeO2@MnO2-cDNA, which exhibited significant photocurrent response and good photocatalytic performance for glucose oxidation under visible light irradiation, providing the feasibility for sensitive determining OMT. After binding with the aptamer of OMT (apt), the formation of rigid double stranded cDNA/apt kept CeO2@MnO2 away from ITO surface, which ensured a low photocurrent background for the constructed ITO/CeO2@MnO2-cDNA/apt aptasensor. In the presence of target OMT, the restoration of the cDNA hairpin structure and the exonuclease I-assisted cyclic catalytic hydrolysis led to the generation and amplification of measurement photocurrent signals, and allowed the aptasensor to have an ideal quantitative range of 0.01–10.0 nM and low detection limit of 0.0027 nM. Moreover, the aptasensor has been applied for selective determination of OMT in real samples with good precision of the relative standard deviation less than 6.2 % and good accuracy of the recoveries from 93 % to 108 %. What's more, the aptasensor can be used for other target determination only by replacing the captured DNA and corresponding aptamer.

Photoelectrochemical aptasensing withmethylene blue filled Ni-MOFs nanocomposite by spatial confinement for microcystin-LR detection.

Microcystin LR (MC-LR) is a hazardous cyanotoxin produced by cyanobacteria during freshwater eutrophication, which can cause liver cancer. Here, a photoelectrochemical (PEC) aptasensor based on methylene blue (MB)-loaded Ni-MOF composite (Ni-MOF/MB) with spatial confinement was constructed for the sensitive detection of MC-LR. Ni-MOF with two-dimensional sheet structure was prepared via a liquid-liquid interface synthesis method with environmental-friendly solvent and milder reaction conditions. Benefiting from the uniform pore size, Ni-MOF acted as reaction platform to anchor the photosensitive molecule MB. The electron donor, ascorbic acid (AA), was produced by alkaline phosphatase (ALP) loaded on DNA strand catalyzing ascorbic acid phosphate. The generated AA was absorbed by Ni-MOF/MB, thereby effectively improving the utilization of AA and avoiding the external environment interferences to enlarge the photocurrent of MB. For analysis, ALP-labeled aptamer can specifically recognize MC-LR by forming acomplex to strip from aptasensor, thus leading to a decreased photocurrent. Thedeveloped PEC aptasensor offered a linear range of 10 fM-100 pM with a detection limit of 6 fM. It was successfully employed for detecting MC-LR in farm water and fish meat, and the results were validated by ultrahigh-performance liquid chromatography-mass spectrometry. This method presents a new idea of MOF-limited domain for PEC aptasensing.

A photoelectrochemical aptasensing platform assembled at the heterojunction interface of Cu3BiS3 sensitized CuV2O6 for bisphenol A.

The interaction between the sensitive interfaces of photoelectrochemical (PEC) semiconductor nanomaterials and microscopic matter creates endless potential for the efficient detection of endocrine disruptor. Thiswork presents the development of a high-efficiency PEC aptasensor for bisphenol A (BPA) monitoring based on Cu3BiS3 sensitized CuV2O6 nanocomposites with exceptional visible-light PEC activity. We implemented the integration of Cu3BiS3 nanosheet photosensitizer to sensitize the CuV2O6 nanowire structure that was synthesized utilizing a facile hydrothermal approach. The band gap alignment between Cu3BiS3 and CuV2O6 facilitated enduring PEC response yielding an efficient interfacial structure. The surface of the CuV2O6/Cu3BiS3 electrode was modified with BPA aptamer, enabling specific binding with BPA and precise quantification of its content. The developed aptamer sensors possess a wide detection range of5.00 × 10-1 to 5.00 × 104 ng/mL, and a low detection limit of 1.60 × 10-1 ng/mL (at S/N = 3). After undergoing 20 testing cycles and enduring long-term storage, the sensor maintained its stability and showcased excellent repeatability and reproducibility. This study presents a promising methodology for the detection of BPA in environmental settings.