Photocatalytic Degradation Of Organic Pollutants Research Articles

BiOClxM1-x (M=I, Br) solid solution-coupled CdS photocatalysts for enhanced visible light-driven organic pollutants degradation with simultaneous hydrogen production

The construction of Z-scheme heterojunction stands out as one of the most effective modification methods for enhancing the performance of photocatalysts. Therefore, BiOClxM1-x (M=I, Br) solid solution-coupled CdS (BiOClxM1-x/CdS) Z-scheme photocatalysts were successfully synthesized by a hydrothermal-precipitation method. BiOCl0.8I0.2/CdS exhibited notable photocatalytic performance with a hydrogen yield of 261 μmol/g, which was 2.23, 1.56 and 1.44 times higher than that of CdS, BiOCl/CdS and BiOCl0.5Br0.5/CdS, respectively. This improvement can be attributed to two key factors: (1) the formation of BiOClxM1-x (M=I, Br) solid solution enhances visible light absorption; (2) The formation of BiOCl0.8I0.2/CdS (M=I, Br) Z-scheme heterojunctions inhibit the recombination of photogenerated carriers to prolong the lifetime of photogenerated carriers, thus increasing the utilization of the photogenerated carriers. Moreover, BiOCl0.8I0.2/CdS also showed good photocatalytic activity in ROW-DFHP (residual organic wastewater from dark fermentation for hydrogen production), with a hydrogen production rate of 42.83 μmol/g and a mineralization rate of organic pollutants of 31.73%. Cycling experiments, XRD and SEM of the samples before and after the photocatalytic reaction showed that BiOCl0.8I0.2/CdS has good stability. Furthermore, the mechanism of BiOCl0.8I0.2/CdS for the photocatalytic degradation of organic pollutants and simultaneous hydrogen production was proposed, offering a novel strategy for organic wastewater purification and hydrogen energy recovery.

Facile hydrothermal synthesis of a multifunctional copper zinc tin sulfide (CZTS) nanoparticle-coated sepiolite fiber composite: structural characterization and photocatalytic properties

This work presents a facile hydrothermal synthesis method for fabricating a multifunctional composite of copper zinc tin sulfide (CZTS) nanoparticles coated onto sepiolite fibers. Morphological analysis confirms the firm attachment of approximately 10 nm CZTS nanoparticles onto the sepiolite surface. Elemental analysis verifies the presence of constituent elements from both CZTS and sepiolite, with a slight deficiency in Cu and an abundance of Zn observed. The compositional formula of CZTS in the composite is estimated as Cu1.93Zn1.05Sn0.98S4.04. Notably, the material exhibits a narrow band gap of 1.5 eV, enabling effective utilization of the entire visible light spectrum, making it promising for photocatalytic applications. BET nitrogen adsorption/desorption measurements reveal a substantial surface area of approximately 85.720 m2 /g, confirming the composite’s versatility and applicability, particularly in photocatalysis and adsorption processes. Additionally, X-ray diffraction analysis indicates reflections consistent with the crystal structures of kasterite CZTS and sepiolite, further confirming the composite’s composition. The multifunctional CZTS/Sepiolite composite demonstrates exceptional potential for simultaneous photocatalytic degradation and adsorption of organic pollutants, presenting a promising avenue for sustainable water treatment applications.

Emerging trends of ferrite-based nanomaterials as photocatalysts for environmental remediation: A review and synthetic perspective

Efficient wastewater treatment processes are in high demand for removing organic and inorganic pollutants. Photocatalysis, as an environmentally friendly technology, has shown significant progress in the treatment of contaminated wastewater. This review explores the potential of spinel ferrite-based nanomaterials as efficient photocatalysts for wastewater treatment. To enhance their properties, ferrites have been combined with advanced materials, such as BiOX, MXene, and g-C3N4 to form binary and ternary nanocomposites. We highlight the state-of-the-art in these binary and ternary spinel ferrite nanocomposites in the photocatalytic degradation of organic pollutants. These ferrite nanocomposites showed superior photocatalytic performance due to enhanced properties such as increasing the capacity for light utilization, slowing electron-hole recombination, and reducing agglomeration. Furthermore, our review explores recent research on template-assisted synthesis, a novel approach for fine-tuning the morphology of spinel ferrites and enhancing their catalytic efficiency. The impact of both the soft and hard templates on the properties of the produced ferrite nanomaterials is discussed. Overall, this unique combination of advanced nanocomposite materials and structural control using template-assisted approaches paves the way for a new generation of highly efficient photocatalysts. Thus, we provide a comprehensive overview of recent advances in the development of ferrite nanocomposites, underlining their potential as photocatalysts for environmental remediation applications.

Cellulose-based materials in tailoring a novel defective titanium‑carbon‑phosphorus hybrid composites for highly efficient photocatalytic activity

Until now, black titania has attracted much interest as a potential photocatalyst. In this contribution, we report the first demonstration of the effective strategy to fundamentally improve the photocatalytic performance using a novel sustainable defective titanium‑carbon-phosphorous (TCPH) hybrid nanocomposite. The prepared TCPH was used for photocatalytic degradation of the main organic pollutants, which is methyl orange (MO) dye. The physico-chemical properties of as-prepared samples were characterized by various techniques to observe the transformations after carbonization and the interaction between different composite phases. The existence of Ti+3 and oxygen vacancies at the surface, and a notable increase in surface area, are all demonstrated by TCPH, together with the distinct core-shell structure. These unique properties exhibit excellent photocatalytic performance due to the boosted charge transport and separation. The highest degradation efficiency of methyl orange (MO) was attained in the case of TCPH when compared with titanium-cellulose-phosphorous (TCeP) and titanium‑carbon-phosphorous (TCPN). Accordingly, the highest degradation efficiency was achieved by applying the optimal operational conditions of 1 g/L of TCPH catalyst, 10 mg/L of MO, pH of 7 and the temperature at 25 ± 3 °C after 3 min under LED lamp (365 nm) with light intensity 100 mW/cm2. The degradation mechanism was investigated, and the trapping tests showed the dominance of hydroxyl radicals in the degradation of MO. TCPH showed high stability under a long period of operation in five consecutive cycles, which renders the highly promising on an industrial scale. The fabrication of highly active defective titanium‑carbon-phosphorous opens new opportunities in various areas, including water splitting, and CO2 reduction.

Construction of TiO2@Cu2O-CuS heterostructures integrating RGO for enhanced full-spectrum photocatalytic degradation of organic pollutants

This study presents the development and optimization of TiO2@Cu2O-CuS heterostructures, enhanced with reduced graphene oxide (RGO), for efficient photocatalytic degradation of organic pollutants, focusing on imidacloprid. Two configurations, TiO2/RGO/Cu2O-CuS and Cu2O-CuS/RGO/TiO2, are explored to highlight the impact of material layering on photocatalytic efficiency. The strategic integration of RGO optimizes charge transfer, crucial for photocatalysis. Comprehensive characterization techniques, such as X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Raman spectroscopy, and Nitrogen adsorption-desorption isotherms, provide insights into the crystalline structure, morphology, surface chemistry, and textural properties of the heterostructures. The TiO2/RGO/Cu2O-CuS configuration significantly outperforms its counterpart in photocatalytic activity under full-spectrum (UV–VIS–IR) illumination, due to improved charge carrier dynamics and synergistic interactions between the composite materials. Remarkably, the TiO2/RGO/Cu2O-CuS assembly achieved over 95 % degradation of imidacloprid under simulated solar irradiation, marking a breakthrough in solar spectrum utilization for photocatalysis and exhibits promising recyclability, maintaining its high photocatalytic efficiency even after multiple degradation cycles, highlighting its potential for sustainable pollutant removal applications. Additionally, this configuration demonstrates a twofold increase in degradation efficiency compared to separate UV and VIS irradiations, emphasizing its rapid pollutant removal capability. This research underscores the critical role of material layer sequencing in developing high-efficiency photocatalytic systems and marks a significant advancement in environmental remediation technologies that harness renewable energy sources.

Enhanced photocatalytic degradation of organic pollutants by green-synthesized gold nanoparticles using polysaccharide for environmental remediation

The recent rise in textile dye wastewater discharge into the environment has detrimental effects on living organisms and human health. The present study reports a facile approach to green-synthesized AuNPs employing sesbania gum for catalytic and photocatalytic degradation of organic pollutants. The obtained AuNPs were characterized by various techniques such as UV–vis, FT-IR, SEM, TEM, AFM, zeta potential, LC-MS, and XPS. The XRD patterns revealed a highly crystalline and face-centered cubic structure. XPS and EDX analysis defined the chemical composition and product purity of SBG-AuNPs. Photocatalytic degradation of hazardous dyes congo red and safranin-O using SBG-AuNPs showed a rapid decomposition rate with 94.69 % under visible light irradiation. The effect of pH, dye concentration, and catalyst dose on photodegradation and recyclability was also studied. The kinetic plots were used to calculate the rate constant, showing a pseudo-first-order reaction. Scavenger trap experiments confirmed the role of h+ and superoxide(.O2−) as active species, and LCMS analysis was used to identify the degradation intermediates. The catalytic reduction of SBG–AuNPs was studied for brilliant green (BG) and methylene blue (MB) in the presence of NaBH4, resulting the degradation efficiency of 90.37 % and 84.52 %, respectively. This study presents an innovative approach for designing highly efficient photocatalysts for environmental remediation and wastewater treatment from textile dyes.

Ultrathin Sulfur‐Doped g‐C3N4 Nanosheets Controlled by Steam Activation for Enhanced Visible‐Light Photocatalytic Performance

AbstractGraphite carbon nitride (g‐C3N4) has garnered considerable attention due to its excellent photocatalytic properties for the degradation of organic matter in wastewater treatment. Herein, sulfur‐doped g‐C3N4 nanosheets (CN−S‐X) were successfully synthesized via physical steam activation using thiourea and urea as precursors. Comprehensive characterizations demonstrate that the enhanced photocatalysis is attributed to the ultrathin structure, highly active site, vacancy defects, and high specific surface area due to the synergy of S doping and steam activation. The as‐prepared CN−S‐25 photocatalyst exhibits a desirable degradation efficiency of 95.4 % for methylene blue dye with a high degradation rate of 2.65×10−2 min−1 under visible‐light irradiation, which are 2.1 and 5.52 times those for bulk g‐C3N4, respectively as well as good reusability and stability. This study provides a simple and promising strategy to regulate the nanostructure of g‐C3N4 for highly efficient photocatalytic degradation of organic pollutants.

Reinforcing 2D Single-Crystal Bi2O2CO3 with Additional Interlayer Carbonates by CO2-Assisted Solid-to-Solid Phase Transition.

A facile gaseous CO2 mediated solid-to-solid transformation principle is adopted to insert additional CO3 2- anions into the thin single-crystal nanosheets of Bi2O2CO3, which is built of periodic arrays of intrinsic CO3 2- anions and (Bi2O2)2+ layers. The additional CO3 2- anions create abundant defects. The Bi2O2CO3 nanosheets with rich interlayer CO3 2- exhibit superior electronic properties and charge transfer kinetics than the pristine single-crystal 2D Bi2O2CO3 and display enhanced catalytic activity in photocatalytic CO2 reduction reaction and the photocatalytic oxidative degradation of organic pollutants. This work thus illustrates interlayer engineering as a flexible means to build layered 2D materials with excellent properties.

Persistent production of multiple active species with copper doped zinc gallate nanoparticles for light-independent photocatalytic degradation of organic pollutants

Photocatalysis is considered as an environmentally friendly and sustainable method as it can produce active species to degrade pollutants. However, its applications are hindered by the turbidity of pollutants and the requirements for continuous or repeated in situ irradiation. To avoid the need for continuous in situ irradiation in the photocatalytic process, herein we report the doping of Cu(II) ions into zinc gallate (ZnGa2O4) as traps to capture photo-generated electrons. In this way, long lifetime charge release and separation were effectively achieved for the persistent degradation of organic dyes in wastewater. The Cu(II) doped ZnGa2O4 (ZGC) nanoparticles with a small size about 7.7 nm synthesized via a hydrothermal method exhibited a persistent photocatalytic activity with continuous production of reactive oxygen species for at least 96 h without in situ irradiation due to its unique electronic structure and carrier transport path, and enabled to degrade 82.2 % of rhodamine B in 1 h. Further investigation revealed that the doped Cu(II) ions occupied the octahedral sites of ZGC and highly increased the persistent production and availability of active species for the persistent degradation of organic dyes under pre-illuminated conditions.

Enhanced photocatalytic degradation of organic pollutants in actual sewage water with a full-spectrum-responsive NaYF4:Yb,Tm@NaYF4:Yb,Nd@TiO2@g-C3N4 nanoheterojunction photocatalyst

Full spectrum-excitation photocatalysis is promising for the environmentally friendly treatment of actual sewage with sunlight. High-efficiency, stable NaYF4:Yb,Tm@NaYF4:Yb,Nd@TiO2@g-C3N4 (UPTC) nanoheterojunction photocatalysts were fabricated via facile chemical synthesis. Nanophotocatalyst characterization revealed good crystallinity, strong composite formation, and a high separation rate of photoexcited charges. The synthesized UPTC was excited by ultraviolet, visible light and infrared light, exhibiting excellent full spectrum-response. Under near-infrared irradiation at 808 nm and 980 nm, UPTC effectively degraded rhodamine B (RhB). Under simulated sunlight, UPTC decomposed 88.6% malachite green, 92.2% rose bengal, and 90.8% RhB in 90 min. In photocatalysis, ·O2- played a dominant role. Moreover, the nanoheterojunction structure greatly improved photoexcited carrier separation. UPTC nanoheterojunction had excellent recycling capability. In actual sewage treatment, UPTC degraded 36.5% ammonia-nitrogen under simulated sunlight. In addition, UPTC exhibited sufficient biosafety. This study offers a fresh potential approach for producing highly efficient, stable, and biosafe nanoheterojunction photocatalysts for sewage treatment.

Simultaneous photocatalytic removal of tetracycline and hexavalent chromium by BiVO4/0.6CdS photocatalyst: Insights into the performance, evaluation, calculation and mechanism

In this study, a novel Z-scheme heterojunction on bismuth vanadium/cadmium sulfide (BiVO4/0.6CdS) was developed and evaluated for simultaneous photocatalytic removal of combined tetracycline (TC) and hexavalent chromium Cr(Ⅵ) pollution under visible light. Based on the analysis of intermediate products and theoretical calculation, the property of the intermediate products of TC degradation and the effect of built-in electric field (IEF) of composite materials on photo-generated carrier separation were illustrated. According to the experiments and evaluation results, the performance of BiVO4/0.6CdS is higher than CdS 2.83 times and 4.82 times under the visible light conditions, with the aspect of simultaneous oxidizing TC and reducing Cr(Ⅵ), respectively. The catalyst has a faster removal rate in the binary composite pollution system than the single one. Therefore, the photocatalytic degradation of TC using BiVO4/0.6CdS can reduce the toxic effect of TC on the environment. The aforementioned evaluation provides a new design strategy for Z-scheme heterojunction to simultaneous photocatalytic degradation of composite organic and inorganic pollutants.

Fabrication of Ag-decorated La0.9Ag0.1FeO3 for efficient photocatalytic degradation of tetracycline under visible light with the assistance of water oxidation

The photocatalytic conversion of molecular O2 into reactive oxygen species, such as superoxide radicals (·O2-), has become the focus in the oxidative removal of organic pollutants. Nevertheless, the inefficient light absorption, limited adsorption of O2, and the fast recombination rate of photo-induced electron-hole pairs considerably impede the conversion efficiency of the photocatalysts. Herein, we report the synthesis of Ag@LAFO photocatalyst, which contains Ag nanoparticles (NPs)-decorated LAFO (Ag-substituted LaFeO3), to enhance the photodegradation efficiency of tetracycline (TC) with the assistance of water oxidation. Structural and spectroscopic analyses confirmed the successful decoration of Ag NPs on LAFO, which was prepared by substituting 10 % La with Ag. The efficiency of TC photocatalytic degradation rate of Ag@LAFO is 76.25 %, which is 6.1-fold higher than that of pure LFO (12.41 %). The trapping experiment of active radicals verified that ·O2- was crucial in the decomposition of TC molecules and was continuously supplied by the reduction of O2 molecules supported by photocatalytic water oxidation. Moreover, the Ag NPs in Ag@LAFO were found to be crucial for boosting the capture of photo-induced electrons and the activation of adsorbed O2. This study offers a new perspective on the conversion of O2 to ·O2- with the assistance of photocatalytic water oxidation for photocatalytic degradation of organic pollutants.

Constructing a type-II heterojunction of AgI/CO32−-Bi2O2CO3 for enhanced photocatalytic degradation of organic pollutants

The construction of heterojunctions is a well-established approach for enhancing the photocatalytic efficiency of semiconductor materials. To improve the photocatalytic activity of CO32−-Bi2O2CO3, AgI/CO32−-Bi2O2CO3 type-II heterojunction photocatalysts were synthesized using an electrostatic self-assembly method with varying composite ratios. The performance of AgI/CO32−-Bi2O2CO3 catalyst was investigated by photocatalytic degradation of 2-Hydroxy-1, 4-naphthoquinone and levofloxacin under a 300 W xenon lamp (λ ≥ 420 nm). The results demonstrated that the composite photocatalyst (0.5ACBOC), prepared by incorporating 0.5 mL of AgNO3 and KI, exhibited exceptional photocurrent responsiveness and efficient charge carrier separation. 0.5ACBOC displayed the highest degradation efficiency towards 2-Hydroxy-1,4-naphthoquinone (67.5%) and levofloxacin (78.0%). Free radical capture experiments and electron paramagnetic resonance (EPR) analysis revealed ·O2− as a crucial reactive species in the photodegradation process. Moreover, the photocatalytic degradation of 2-Hydroxy-1,4-naphthoquinone exhibited consistent removal efficiency even after undergoing four cycles, thereby demonstrating the excellent cycle stability of the composite catalyst. These findings highlight that AgI/CO32−-Bi2O2CO3 can be easily synthesized and holds great potential as a photocatalyst for efficient degradation of organic pollutants.

S-Schematic CuWO4/ZnO nanocomposite boosted photocatalytic degradation of organic dye pollutants

S-schematic CuWO4/ZnO nanocomposite photocatalyst was synthesized by an impregnation method. Synthesized CuWO4 and ZnO nanoparticles, and CuWO4/ZnO nanocomposites were thoroughly characterized. X-ray diffraction (XRD) analysis of the CuWO4/ZnO nanocomposite confirmed the respective triclinic and hexagonal wurtzite structures of CuWO4 and ZnO crystals. Raman and Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectroscopy (XPS) revealed bond formations in CuWO4 and ZnO, and confirmed the synthesis of the CuWO4/ZnO nanocomposite. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed CuWO4 nanoparticles adhered to ZnO aggregates. Energy dispersive X-ray spectrometry (EDS) confirmed the distribution of CuWO4 on the ZnO aggregates. UV–Vis diffuse reflectance spectroscopy (DRS) showed optical bandgap energies of 2.36 eV for CuWO4 and 3.18 eV for ZnO nanoparticles. The photocatalytic performance of the CuWO4/ZnO nanocomposite was investigated through the degradation of the cationic dyes methylene blue (MB) and Rhodamine B (RhB) and the anionic dye methyl orange (MO). A 5.0%CuWO4/ZnO nanocomposite degraded 100% of MB within 120 min, 91.02% of RhB within 300 min, and 89.13% of MO within 300 min. The pseudo-first order kinetic rate constant fit well for the degradation of all the dyes on the CuWO4/ZnO nanocomposite. The CuWO4/ZnO nanocomposite could better degrade the cationic dyes than the anionic dye in an aqueous solution. The hole (h+), the hydroxyl radical (•OH), and the superoxide ion (•O2−) were the active species responsible for degrading MB, RhB and MO dyes. The proposed CuWO4/ZnO nanocomposite could be applied for environment friendly wastewater treatment.

Sunlight driven photocatalytic degradation of organic pollutants by solvothermally synthesized rGO-BiVO4 nanohybrids

This study reports photocatalytic degradation of organic dyes by rGO-BiVO4 nanohybrids. rGO- BiVO4 nanohybrids were solvothermally prepared with different rGO loading (1.5, 3 and 6 %) and their structural, optical and photocatalytic properties were investigated. Effect of rGO loading on photocatalytic dye degradation was studied and the factors responsible were analyzed. Structural analysis was done using XRD and Raman analyses which clearly showed monoclinic phase of the BiVO4. FESEM images showed sub-micron spheres of BiVO4 along with sheet-like structures corresponding to rGO. A slight change in the band gap was observed from 2.2 eV for BiVO4 to around 2 eV for the rGO-BiVO4 nanohybrids. Band to band transitions as well as the transitions from the defect bands were observed from the PL spectra. Photocatalytic degradation studies of organic pollutant MB under natural sunlight showed 3 % rGO-BiVO4 to be the best photocatalyst which degraded 88.4 % of MB in 80 min with rate constant of 0.0244 min−1. It was observed that for obtaining a maximum catalytic efficiency an optimum loading of rGO proved to be best. In either case of higher or lower loading of rGO showed a lower degradation performance. Amongst the samples synthesized 3 % rGO loading was found to be the optimum rGO loading to have the lowest band gap (2 eV) as well as the reduced recombination that has resulted in highest photocatalytic efficiency under solar irradiation.

Crafting defective ZnO nanoparticles: A green synthesis for enhanced photocatalytic degradation of organic pollutants

Surface defect engineering is a promising strategy for enhancing the number of surface-active sites to facilitate efficient redox reactions that occur on the surface of a photocatalyst. A green approach was employed to prepare urea- and choline-chloride-based deep eutectic solvent (DES) for the synthesis of ZnO/Zn(OH)2 supported by a DES complex (Zn precursor). Surface defects on ZnO nanoparticles (NPs) were tailored by decomposing the Zn precursor in air. In addition, calcination improved the crystallinity and surface-active sites of the defective ZnO by creating surface oxygen vacancies (Vo). The appearance of an Electron paramagnetic resonance peak at a g value of 1.96 confirms the formation of single-charged Vo defects on the surface of ZnO. The photocatalyst prepared at a reaction bath temperature of 75 °C (Vo-ZnO-75) showed the highest photocatalytic activity. The observed green emission in the photoluminescence spectrum and X-ray photoelectron spectroscopy analysis suggests the formation of defects on the ZnO surface. Consequently, Vo-ZnO-75 enhanced surface donor density (14.4×1020 cm−3) and lower charge transfer resistance (88.89 × 103 Ω). The optimized photocatalyst of Vo-ZnO-75 has 94% removal efficiency for rhodamine B degradation within 60 min. This study sheds new light on the development of an efficient and eco-friendly approach for preparing defective ZnO NPs for photocatalytic applications.

Two-dimensional Ti3C2Tx anchored on three-dimensional SiC honeycomb framework for efficient and cyclic photocatalytic degradation of organic pollutants

The excellent recyclability of SiC foam renders it an ideal catalyst in the field of photocatalytic degradation, however to further improve its photocatalytic efficiency remains a major challenge in current research. In this regard, a honeycomb-like porous SiC foam was successfully constructed through freeze-drying and polymer-to-ceramic derivation method, with two-dimensional Ti3C2Tx nanosheets anchored on its three-dimensional framework. Their photocatalytic performances were evaluated by the degradation of methylene blue (MB) under visible-light irradiation. All Ti3C2Tx/SiC hybrid foams show superior photocatalytic degradation capability compared with SiC foam, with a highest removal rate (adsorption and degradation) reaching 94.4% for TSF-4, denoting an increasement of 50.4%. Even after five cycles, the removal rate remained at 91.4% with only a slightly loss of 3%, suggesting its excellent recycling performance. These desirable results stem from the unique structural design, in which the porous structure facilitates the contact between catalyst and pollutant, while the Ti3C2Tx/SiC heterojunction promotes effective separation of photogenerated carriers. This work paves the way for the development of lightweight, efficient and easily recyclable photocatalyst for wastewater purification.

Construction of A-FeOx/LaFeO3 hybrid microreactors for efficient photocatalytic degradation of organic pollutants

Low-dimensional hybrid nanocrystals are newly emerging active photocatalysts for separating electron-hole pairs, but the instability and low quantum efficiency caused by particle aggregation and hybrid structure relaxation remain great challenges. To this end, herein we constructed amorphous FeOx (A-FeOx) and crystalline LaFeO3 hybrids by a sol-gel method. The amorphous-crystalline hybrids, A-FeOx/LaFeO3, not only improve the surface area and alter the band position, but also form numerous channels that are conducive to the transport of electrons and separation of electron–hole pairs, acting as microreactors. Photocatalytic tests show that the A-FeOx/LaFeO3 is highly active for the degradation of various organic pollutants, with reaction rate constant of 1.19 × 10–2 min–1 for ciprofloxacin degradation, for example, which is 1.82 and 1.87 times higher than that of LaFeO3 and Fe2O3/LaFeO3, respectively, owing to the formation of microreactors between A-FeOx and LaFeO3. Cycling tests show that the material has good stability in the reaction, and trapping experiments demonstrate that the photo-induced holes are the main reactive species of the reaction. This work provides a novel and feasible insight into the design of high performance low-dimensional hybrid nanocatalysts for photocatalysis.

Self-standing CdS/TiO2 Janus nanofiberous membrane: COD removal, antibacterial activity and photocatalytic degradation of organic pollutants

The self-standing TiO2 nanofiber-based heterojunction with excellent visible-light-driven photocatalytic activity, antimicrobial activity, and reusability holds great importance in water and airborne pollutant management. Herein, a series of splendid flexible CdS/TiO2 (CdS/TZ) nanofibrous membranes (NFMs) were fabricated by facile post-electrospinning treatment. The self-standing TiO2 NFM was first prepared via the electrospinning technique followed by controlled calcination, and then the CdS nanoparticles (NPs) were grown by the successive ionic layer adsorption and reaction (SILAR) method. The careful deposition of CdS NPs preserved the self-standing properties of the TiO2 membrane. The amount of CdS NPs in the CdS/TiO2 membrane was tailored by varying the SILAR cycles. The CdS/TiO2 heterojunction demonstrated superior antimicrobial efficacy against both Gram-positive and Gram-negative bacteria. Additionally, it enhanced the photocatalytic degradation of the methyl orange and effectively removed oxidizable impurities from pharmaceutical effluent while maintaining good recycling capacity. The photocatalytic degradation of methyl orange obeyed the pseudo-first-order reaction dynamics model and showed a strong influence of the CdS amount on the degradation. The maximum degradation rate for methyl orange dye using the CdS/TiO2 Janus membrane was 0.057 min−1, which was 3.5 times that of the TiO2 membrane. The degradation efficiency of CdS/ TiO2 was found to be up to 96.8% in 60 minutes and showed excellent photocatalytic activity in five consecutive cycles. The chemical oxygen demand (COD) removal efficiency for the TiO2 membrane was 74.16, which was increased to 91.66% for the CdS/TiO2 membrane. This study provides insight into developing highly efficient Janus inorganic nanofiber with superior structural integrity for waste water treatment and environmental remediation.

New breakthrough in dye removal: Ultrafast removal of high concentration MB with biochar-based organic photocatalysts under indoor light (30W/m2) drive

At the present stage, the light sources used in the photocatalytic degradation of organic pollutants are generally UV and simulated sunlight, which invariably increase the extra energy loss. Therefore, it is important to find an effective strategy for the rapid removal of high concentrations of organic pollutants in a cleaner and low-light environment with lower energy consumption. Here we prepare three biochar-based organic photocatalytic materials PM6:TPIC/BC, PM6:TPIC-2Cl/BC, PM6:TPIC-4Cl/BC by impregnation method. Among the three photocatalysts, PM6:TPIC-4Cl/BC exhibits the highest apparent rate constant (0.105 min−1), which is 3 times and 1.5 times higher than PM6:TPIC/BC (0.034 min−1) and PM6:TPIC-2Cl/BC (0.071 min−1) respectively. Due to a wider range of light absorption, the best material is able to completely degrade high concentrations of MB in 3 min. Moreover, photoluminescence (PL), time-resolved photoluminescence (TRPL), electrochemical impedance (EIS), and photocurrent (PCR) measurements confirm its exceptional photogenerated electron-hole separation. Free radical trapping identifies h+, ·OH, and ·O2− as key reaction species. DFT analysis reveal atoms with higher Fukui index (f0) as prime free radical targets. LC-MS detects intermediates, suggesting possible degradation pathways. The reduced toxicity of the degradation products after photocatalysis indicates an environmentally friendly approach. This work demonstrates the valuable of PM6:TPIC-4Cl/BC organic photocatalysts for treating organic wastewater.