Photoacoustic Imaging Technology Research Articles

Advances in Photoacoustic Endoscopic Imaging Technology for Prostate Cancer Detection

The rapid progress in biomedical imaging technology has generated considerable interest in new non-invasive photoacoustic endoscopy imaging techniques. This emerging technology offers significant benefits, including high spectral specificity, strong tissue penetration, and real-time multidimensional high-resolution imaging capabilities, which enhance clinical diagnosis and treatment of prostate cancer. This paper delivers a thorough review of current prostate cancer screening techniques, the core principles of photoacoustic endoscopy imaging, and the latest research on its use in detecting prostate cancer. Additionally, the limitations of this technology in prostate cancer detection are discussed, and future development trends are anticipated.

Research on 3D Reconstruction of Paleontological Fossils Based on Photoacoustic Microscopy

Abstract The focus on three-dimensional morphological analysis of endogenous trace fossils has emerged as a prominent aspect in the study of palaeobiological fossils. Photoacoustic imaging technology, renowned for its deep penetration, high resolution and non-destructiveness, holds considerable promise in exploring fossil morphology. In this work, a solid-coupling-based photoacoustic microscopic imaging system was developed, leveraging this technology to investigate small-scale physical fossils. The proposed system enabled layered imaging of various fossil specimens, achieving a lateral resolution exceeds 35 μm and an axial resolution superior to 8.8815 μm. The three-dimensional reconstruction results were obtained through image processing algorithms. This system was proved to be efficient to imaging the small-scale physical fossils.

The Feasibility Study of Bone Fracture Assessment Based on Photoacoustic Time-of-Flight Method

Abstract Photoacoustic imaging (PAI) technology combines the advantages of acoustic resolution and optical contrast imaging within deep tissue. The commonly clinically used bone fracture detection and evaluation method is X-ray based imaging techniques. In order to study the feasibility of human radius fractures detection in non-radiation and non-invasive way, this study combined the time-of-flight (TOF) method commonly used in industrial nondestructive testing with photoacoustic technology for the detection and location of bone fractures. Firstly, the bone fracture information carried by PA signal was studied by simulating the bone models with different locations of bone fractures. The finite difference time domain (FDTD) method was used to simulate the propagation process of photoacoustic signal in bone tissue. Secondly, the PATOF diagrams formed by PA signals at different locations is obtained by using laser fixed and ultrasonic detector motion detection method. Finally, the PATOF diagrams are further analyzed and quantified. The results show that the photoacoustic bone detection method based on TOF method can effectively locate the fracture location. This study confirms the feasibility of combining PAI technique with TOF method to detect bone fractures, which indicates that PAI technique has great application prospect in bone detection field.

Photoacoustic Image Analysis of Dental Tissue Using Two Wavelengths: A Comparative Study

This work compares photoacoustic images of a tooth by analyzing the signals generated with wavelengths 532 and 355 nm. This comparison addresses the differences in the optical properties of dental tissue for these wavelengths that affect the resulting photoacoustic images. A pulsed Nd:YAG laser was used to illuminate a complete extracted tooth sample, and 2D photoacoustic images (PAIs) were reconstructed using the single-sensor scanning synthetic aperture focusing technique (SSC-SAFT), which is a suitable method for our experimental system with forward detection mode. Signal comparison was conducted using sinogram, signal-to-noise ratio (SNR), root mean square (RMS), arrival time, maximum amplitude, and fast Fourier transform (FFT). PAI comparison utilized intensity profile, edge correlation, and image composition tools. The signal analysis revealed that at 532 nm, the signals exhibited longer decay time and a wider distribution of vibration frequencies due to higher laser pulse energy and greater optical penetration depth. Conversely, at 355 nm, the signals had shorter decay times and a lower frequency distribution, which was attributed to lower energy but improved optical absorption, resulting in reconstructed images with better sharpness and contour definition. This study contributes to the advancement of photoacoustic imaging technology in dentistry by providing insights that could optimize signal generation and image reconstruction for dental tissue.

Research progress of photoacoustic imaging technology in brain diseases

Photoacoustic imaging (PAI) technology, characterized by its high resolution, minimal biological impact, and high sensitivity, has become a cornerstone in biomedical research. Its application spans various domains, showing significant promise for disease diagnosis. Currently, the majority of PAI research is conducted using animal models, with human clinical applications still in early development. This paper reviews the fundamental principles of PAI and explores its use in animal brain imaging studies. It addresses the current challenges and limitations of the technology and evaluates the potential for extending these techniques to human cerebral imaging. PAI offers substantial benefits for diagnosing neurological disorders, and its adaptation for human brain studies is crucial for advancing our understanding of neuropathogenesis, improving early disease detection, and monitoring treatment effectiveness. Continued advancements in PAI are expected to not only augment its role in neuroscience research but also establish it as a valuable tool in clinical diagnostics.

Deep Learning Realizes Photoacoustic Imaging Artifact Removal

Photoacoustic imaging integrates the strengths of optics and ultrasound, offering high resolution, depth penetration, and multimodal imaging capabilities. Practical considerations with instrumentation and geometry limit the number of available acoustic sensors and their “view” of the imaging target, which result in image reconstruction artifacts degrading image quality. To address this problem, YOLOv8-Pix2Pix is proposed as a hybrid artifact-removal algorithm, which is advantageous in comprehensively eliminating various types of artifacts and effectively restoring image details compared to existing algorithms. The proposed algorithm demonstrates superior performance in artifact removal and segmentation of photoacoustic images of brain tumors. For the purpose of further expanding its application fields and aligning with actual clinical needs, an experimental system for photoacoustic detection is designed in this paper to be verified. The experimental results show that the processed images are better than the pre-processed images in terms of reconstruction metrics PSNR and SSIM, and also the segmentation performance is significantly improved, which provides an effective solution for the further development of photoacoustic imaging technology.

Innovative methods for microplastic characterization and detection: Deep learning supported by photoacoustic imaging and automated pre-processing data

Plastic products' widespread applications and their non-biodegradable nature have resulted in the continuous accumulation of microplastic waste, emerging as a significant component of ecological environmental issues. In the field of microplastic detection, the intricate morphology poses challenges in achieving rapid visual characterization of microplastics. In this study, photoacoustic imaging technology is initially employed to capture high-resolution images of diverse microplastic samples. To address the limited dataset issue, an automated data processing pipeline is designed to obtain sample masks while effectively expanding the dataset size. Additionally, we propose Vqdp2, a generative deep learning model with multiple proxy tasks, for predicting six forms of microplastics data. By simultaneously constraining model parameters through two training modes, outstanding morphological category representations are achieved. The results demonstrate Vqdp2's excellent performance in classification accuracy and feature extraction by leveraging the advantages of multi-task training. This research is expected to be attractive for the detection classification and visual characterization of microplastics.

Saliency enhancement method for photoacoustic molecular imaging based on Grüneisen relaxation nonlinear effect.

Photoacoustic molecular imaging technology has a wide range of applications in biomedical research. In practical scenarios, both the probes and blood generate signals, resulting in the saliency of the probes in the blood environment being diminished, impacting imaging quality. Although several methods have been proposed for saliency enhancement, they inevitably suffer from moderate generality and detection speed. The Grüneisen relaxation (GR) nonlinear effect offers an alternative for enhancing saliency and can improve generality and speed. In this article, the excitation and detection efficiencies are optimized to enhance the GR signal amplitude. Experimental studies show that the saliency of the probe is enhanced. Moreover, the issue of signal aliasing is studied to ensure the accuracy of enhancement results in the tissues. In a word, the feasibility of the GR-based imaging method in saliency enhancement is successfully demonstrated in the study, showing the superiorities of good generality and detection speed.

Therapeutic and Contrast Agents for Photoacoustic Imaging-Guided Photothermal Therapy: A Narrative Review.

Photoacoustic imaging is a hybrid modality that combines high-contrast and spectroscopy-based optical imaging specificity with the high spatial resolution of ultrasonography. This review highlights the development and progress of photoacoustic imaging technology over the past decade. This imaging technology has evolved to be more user-friendly, cost-effective, and portable, demonstrating its potential for diverse clinical applications. A potential clinical application lies in the use of photoacoustic imaging as a guiding tool for photothermal therapy. This review was conducted by initially filtering through three databases, namely, Google Scholar, PubMed, and Scopus, resulting in 460 articles published between 2019 and May 2023. Of these, 54 articles were deemed suitable for review after identification. The selected articles were research papers focusing on the development of therapeutic agents that enhance contrast in photoacoustic imaging. All reviewed articles tested these agents both in vitro and in vivo. This review focuses on wavelength absorption and radiation sources for photothermal therapy. The developed agents predominantly used NIR-I wavelengths, whereas the NIR-II region has been less explored, indicating significant potential for future research. This review provides comprehensive insights into the advancement of compounds serving as therapeutic agents and contrast agents in photoacoustic imaging-guided photothermal therapy.

Review of Three-Dimensional Handheld Photoacoustic and Ultrasound Imaging Systems and Their Applications.

Photoacoustic (PA) imaging is a non-invasive biomedical imaging technique that combines the benefits of optics and acoustics to provide high-resolution structural and functional information. This review highlights the emergence of three-dimensional handheld PA imaging systems as a promising approach for various biomedical applications. These systems are classified into four techniques: direct imaging with 2D ultrasound (US) arrays, mechanical-scanning-based imaging with 1D US arrays, mirror-scanning-based imaging, and freehand-scanning-based imaging. A comprehensive overview of recent research in each imaging technique is provided, and potential solutions for system limitations are discussed. This review will serve as a valuable resource for researchers and practitioners interested in advancements and opportunities in three-dimensional handheld PA imaging technology.

High Contrast Detection of Carotid Neothrombus with Strong Near-Infrared Absorption Selenium Nanosphere Enhanced Photoacoustic Imaging.

Carotid artery thrombosis is the leading cause of stroke. Since there are no apparent symptoms in the early stages of carotid atherosclerosis onset, it causes a more significant clinical diagnosis. Photoacoustic (PA) imaging provides high contrast and good depth information, which has been used for the early detection and diagnosis of many diseases. We investigated thrombus formation by using 20% ferric chloride (FeCl3) in the carotid arteries of KM mice for the thrombosis model. The near-infrared selenium/polypyrrole (Se@PPy) nanomaterials are easy to synthesize and have excellent optical absorption in vivo, which can be used as PA contrast agents to obtain thrombosis information. In vitro experiments showed that Se@PPy nanocomposites have fulfilling PA ability in the 700 nm to 900 nm wavelength range. In the carotid atherosclerosis model, maximum PA signal enhancement up to 3.44, 4.04, and 5.07 times was observed by injection of Se@PPy nanomaterials, which helped to diagnose the severity of carotid atherosclerosis. The superior PA signal of Se@PPy nanomaterials can identify the extent of atherosclerotic carotid lesions, demonstrating the feasibility of PA imaging technology in diagnosing carotid thrombosis lesion formation. This study demonstrates nanocomposites and PA techniques for imaging and diagnosing carotid thrombosis in vivo.

In vivo spatial-spectral photoacoustic microscopy enabled by optical evanescent wave sensing

In addition to offering morphological visualizations via capture of the spatial distributions of optical absorption, photoacoustic imaging technology can reveal abundant physical information about biological particles, including their orientation, density, and viscoelasticity, through analysis of the pressure transients in the spectral domain. However, the low-amplitude wideband photoacoustic signals of intrinsic microscopic optically-absorbing objects under the action of confined photoacoustic excitation power continue to hinder simultaneous photoacoustic structural imaging and spectroscopic analysis of the nonfluorescent chromophores in living biological tissues because of the inadequate responses to photoacoustic impulses observed in most photoacoustic imaging setups that include piezoelectric transducers. Building upon a recently-developed optical evanescent wave sensor that can respond to ultrasound with high sensitivity over a broad frequency range, we propose in vivo spatial-spectral photoacoustic microscopy for recovery of structural imaging in three dimensions and characterization of anatomical features in the acoustic frequency domain. Label-free photoacoustic images of a living zebrafish are acquired in which spectroscopically-resolved differentiation of the microarchitecture is accessed, along with isometric micrometer-scale volumetric visualizations. The proposed imaging technology could potentially provide more comprehensive evaluations of the physiopathological status of living small animals.

Visual inertial odometry enabled 3D ultrasound and photoacoustic imaging.

There is an increasing need for 3D ultrasound and photoacoustic (USPA) imaging technology for real-time monitoring of dynamic changes in vasculature or molecular markers in various malignancies. Current 3D USPA systems utilize expensive 3D transducer arrays, mechanical arms or limited-range linear stages to reconstruct the 3D volume of the object being imaged. In this study, we developed, characterized, and demonstrated an economical, portable, and clinically translatable handheld device for 3D USPA imaging. An off-the-shelf, low-cost visual odometry system (the Intel RealSense T265 camera equipped with simultaneous localization and mapping technology) to track free hand movements during imaging was attached to the USPA transducer. Specifically, we integrated the T265 camera into a commercially available USPA imaging probe to acquire 3D images and compared it to the reconstructed 3D volume acquired using a linear stage (ground truth). We were able to reliably detect 500 µm step sizes with 90.46% accuracy. Various users evaluated the potential of handheld scanning, and the volume calculated from the motion-compensated image was not significantly different from the ground truth. Overall, our results, for the first time, established the use of an off-the-shelf and low-cost visual odometry system for freehand 3D USPA imaging that can be seamlessly integrated into several photoacoustic imaging systems for various clinical applications.

Non-uniform image reconstruction for fast photoacoustic microscopy of histology imaging.

Photoacoustic microscopic imaging utilizes the characteristic optical absorption properties of pigmented materials in tissues to enable label-free observation of fine morphological and structural features. Since DNA/RNA can strongly absorb ultraviolet light, ultraviolet photoacoustic microscopy can highlight the cell nucleus without complicated sample preparations such as staining, which is comparable to the standard pathological images. Further improvements in the imaging acquisition speed are critical to advancing the clinical translation of photoacoustic histology imaging technology. However, improving the imaging speed with additional hardware is hampered by considerable costs and complex design. In this work, considering heavy redundancy in the biological photoacoustic images that overconsume the computing power, we propose an image reconstruction framework called non-uniform image reconstruction (NFSR), which exploits an object detection network to reconstruct low-sampled photoacoustic histology images into high-resolution images. The sampling speed of photoacoustic histology imaging is significantly improved, saving 90% of the time cost. Furthermore, NFSR focuses on the reconstruction of the region of interest while maintaining high PSNR and SSIM evaluation indicators of more than 99% but reducing the overall computation by 60%.

Real-time monitoring of NIR-triggered drug release from phase-changeable nanodroplets by photoacoustic/ultrasound imaging

Optical-responsive nanodroplets have recently been studied as a new mode of remotely controlled drug delivery. As a class of new emerging smart drug carriers, NIR-absorber-loaded perfluorocarbon nanodroplets can be converted into gas bubbles through laser stimulation, called optical droplet vaporization (ODV), which provides a potential strategy to deliver therapeutic agents to solid tumors on demand. However, there is a lack of suitable technologies to monitor these drug-loaded nanodroplet behaviors in vivo, and control the site and amount of drug released. In this study, ultrasound and photoacoustic imaging technology were applied to directly monitor optical-responsive, drug-loaded nanodroplets within the tissue. We explored the effects of laser energy, repetition rate, and number of pulses on the release profiles of the delivered drug as well as ultrasound and photoacoustic imaging signal-intensity curves. The conducted studies demonstrated that this noninvasive technology helped determine the optimum time point for laser activation on accumulated drug-loaded nanodroplets within tissues, allowing for the potential to effectively treat pathologies while minimizing drug-related toxicities.

Recent Advances in Activatable Organic Photoacoustic Probes for In Vivo pH‐Detection

AbstractAll life forms require pH homeostasis. The disorder of pH homeostasis is associated with many severe diseases, suggesting the significance of pH‐detection for theranostic diseases. Photoacoustic imaging (PAI) technology has piqued great research interests in spatiotemporal detection of pH in vivo due to its non‐invasiveness and non‐ionization, as well as the high resolution and deep tissue penetration. This mini‐review outlines the most recent advances in activatable organic PA probes for pH‐detection with respect to molecular design, response mechanisms, and their in vivo applications. The basic understanding of PA probes is clarified. The pH‐response mechanisms of the PA probes at the molecular level are particularly emphasized to elucidate the structural design strategies. Finally, the challenges and perspectives, mainly focusing on quantitative detection, are discussed. This review aims to pave the way for further exploration of responsive organic PA probes for in vivo pH‐detection.

Quantitative analysis of oxygen partial pressure measurements based on photoacoustic pump-probe imaging

Pump-probe-based photoacoustic imaging is an innovative technique for high-specificity molecular imaging in deep tissues. Compared with conventional photoacoustic imaging, this method effectively eliminates the interference from blood signal and other background signal, enabling the detection of subtle target molecules. Additionally, the manipulating of the time delay between the pump laser and probe laser can facilitate non-invasive mapping of oxygen partial pressure distribution within tissues. To quantify the photoacoustic pump-probe imaging, we use methylene blue as the molecular probe to monitor changes in oxygen partial pressure within a hemoglobin solution. Utilizing a Gaussian noise model, we investigate the relationship between the stability of the triplet-state difference signal and the average number, and also evaluate the error associated with measuring oxygen partial pressure. The results demonstrate that the detection accuracy of the system is better than 33 mmHg (1 mmHg = 133 Pa) in the oxygen partial pressure range of about 300 to 550 mmHg after 200 times of averaging. This research will play a significant role in guiding the further advancement and application of pump-probe-based photoacoustic imaging technology.

Research and development of polarized photoacoustic imaging technology

Life is a highly ordered combination, and the basic biological processes of cells and tissues are essentially controlled by the structural order of biomolecular assembly, in which the conformational characteristics of biomolecule arrangement, orientation, helix, and folding are closely related to the physiological functions of biological tissues. In the skin, muscle, and nerve tissues of living animals, for instance, fibrous proteins, collagen, nerve fibers, and DNA frequently exhibit molecular spatial conformation properties such as particular alignment or helical structure, and such tissues have distinct optical polarization responses. The fundamental structural foundation for tissues to carry out certain activities is provided by molecular conformational characteristics. Early illness diagnosis will be aided by the accurate detection and efficient revelation of molecular conformational characteristics and their changes. The microscopic organization, structure, orientation, chirality, and other structural details of living things or materials can be obtained by using polarization imaging. The analysis of the imaging depth and polarization data is challenging, despite its widespread usage in the fields of material detection and biological imaging. Photoacoustic imaging preserves both the great contrast of optical imaging and the deep penetration of ultrasonic imaging by using light as an excitation source and ultrasound as the carrier for information transmission. While keeping the benefits of non-invasiveness, it is capable of high-resolution imaging, deep penetration, and functional imaging. A polarized photoacoustic imaging technology has recently been developed to complement polarization optical imaging and allow the collection of three-dimensional polarization data from deeper layers of the medium. This provides a straightforward and efficient method of measuring the polarimetry of tissues, suggesting substantial promise for both biological imaging and substance detection. The evolution of polarized photoacoustic imaging technology is outlined in this paper. First, the technical underpinnings of polarized photoacoustic imaging are described. Then, from the two applications of biological tissue imaging and nanomaterial detection, the related research progress of polarized photoacoustic microscopic imaging, polarized photoacoustic computational tomography, and polarized photoacoustic nanoparticles' molecular imaging is presented. We briefly explain the depolarization that results from particle size, density, and organization as polarized light travels through tissue. In an anisotropic medium, the change in the mid-incident polarization state of such a sample is caused by tissue birefringence and scattering because of the inherent birefringence effect of molecules, whereas in the isotropic medium, depolarization is largely determined by the density and size of the scatter. The potential applications of polarized photoacoustic imaging are then discussed.

Progress of photoacoustic imaging combined with targeted photoacoustic contrast agents in tumor molecular imaging.

Molecular imaging visualizes, characterizes, and measures biological processes at the molecular and cellular level. In oncology, molecular imaging is an important technology to guide integrated and precise diagnosis and treatment. Photoacoustic imaging is mainly divided into three categories: photoacoustic microscopy, photoacoustic tomography and photoacoustic endoscopy. Different from traditional imaging technology, which uses the physical properties of tissues to detect and identify diseases, photoacoustic imaging uses the photoacoustic effect to obtain the internal information of tissues. During imaging, lasers excite either endogenous or exogenous photoacoustic contrast agents, which then send out ultrasonic waves. Currently, photoacoustic imaging in conjunction with targeted photoacoustic contrast agents is frequently employed in the research of tumor molecular imaging. In this study, we will examine the latest advancements in photoacoustic imaging technology and targeted photoacoustic contrast agents, as well as the developments in tumor molecular imaging research.

Frontier progress and challenges based on excited-state porphyrins and their derivatives

<p indent="0mm">Porphyrins and their derivatives feature advantages of strong resonance plane structure and facile modification of molecular, thereby showing great development prospects in the area of biochemistry and optical materials. In this review, based on excited porphyrin and phthalocyanine substrates, modification methods and mechanism research are discussed, and latest progress and challenges of photoacoustic imaging technology for photodynamic therapy, acoustic therapy and adjuvant tumor therapy are reviewed.