Photoinduced Charge Transfer Research Articles

New AIEgens based on thieno[2,3-d]pyrimidine derivatives: Synthesis, DFT calculations, and molecular docking

In this paper, new thieno[2,3-d]pyrimidine analogs have been synthesized and characterized through different spectroscopic techniques. The photophysical properties of the molecules (7b-7f) and the quantum chemical calculations have been investigated. These molecules exhibited aggregation-induced emission behavior and showed efficient emission in both solid and solution states. A shift toward shorter wavelengths (hypsochromic shift) was observed when transitioning from the solution to the solid state, which could be explained by photoinduced intramolecular charge transfer (ICT) processes. DFT calculations confirmed that the diverse behavior of the thieno[2,3-d]pyrimidine analogs could be attributed to variations in molecular packing and rigidity. This study illustrates how luminophores aggregation can occur without significantly impacting the excited state, emphasizing the unconventional behavior resulting from minor alterations in terminal substituents. These findings hold implications for the advancement of luminescent materials. Additionally, theoretical calculations were conducted to compare the excitations and emissions of the new AIEgens with practical observations. Furthermore, a molecular docking study of the five AIEgens suggested their potential utility as anticancer drugs. Compound 7c exhibited a high affinity for human cyclin-dependent kinase 2 (CDK-2) protein, with a binding energy of 9.6 kcal/mol, indicating its potential as an inhibitor for this specific protein.

Highly efficient photocatalysis-Fenton degradation of antibiotics and phenol over sulfidated FeOCl under natural sunlight illumination

Sulfidated FeOCl is prepared as a heterogeneous photo-Fenton catalyst. And the surface sulfidation of FeOCl can remarkably accelerate the photoinduced charge separation and transfer, while also increase Fe2+/Fe3+ atomic ratio, leading to the boosted photo-Fenton activity in the presence of H2O2. Under irradiation of natural sunlight (light intensity: ∼80 mW·cm−2), over 10 mg sulfidated FeOCl catalyst with using 20 μL 15 % H2O2, 91.2 % of ofloxacin solution (50 mg·L−1) and 97.5 % of sulfisoxazole solution (60 mg·L−1) can be degraded in 80 min, and 99.6 % of phenol solution (625 mg·L−1) is decomposed in 4 h. Under irradiation of a white Light-Emitting Diode (LED) lamp (light intensity: 5 mW·cm−2), 99.8 % of ofloxacin solution is decomposed after treatment for 4 h. Moreover, this photo-Fenton degradation system displays a stable activity in a wide range of pH (1−10), diverse water bodies, and various coexisting ions with concertation from 1 mM to 500 mM. Moreover, sulfidated FeOCl catalyst coated on a frosted glass sheet exhibits excellent stability for degrading ofloxacin even in seven continuous cycles. Particularly, the non-toxicity of the treated ofloxacin, sulfisoxazole, and phenol solution, have been proven by testing their toxic effects on cabbage seed, bacteria, and human embryonic kidney cell, respectively.

Tailoring Light-Harvesting in Zn-Porphyrin and Carbon Fullerene based Donor-Acceptor Complex through Ethynyl-Extended Donor π-Conjugation.

Organic photovoltaic efficiency though currently limited for practical applications, can be improved by means of various molecular-level modifications. Herein the role of extended donor -conjugation through ethynyl-bridged meso-phenyl/pyridyl on the photoinduced charge-transfer kinetics is studied in noncovalently bound Zn-Porphyrin and carbon-fullerene based donor-acceptor complex using time-dependent optimally tuned range-separated hybrid combined with the kinetic rate theory in polar solvent. Noncovalent dispersive interaction is identified to primarily govern the complex stability. Ethynyl-extended -conjugation results in red-shifted donor-localized Q-band with substantially increased dipole oscillator strength and smaller exciton binding energy, suggesting greater light-harvesting efficiency. However, the low-lying charge-transfer state below to the Q-band is relatively less affected by the ethynyl-extended -conjugation, yielding reduced driving forces for the charge-transfer. Detailed kinetics analysis reveals similar order of charge-transfer rate constants (~1012 s-1) for all donor-acceptor composites studied. Importantly, enhanced light-absorption, smaller exciton binding energy and similar charge-transfer rates together with reduced charge-recombination make these complexes suitable for efficient photoinduced charge-separation. These findings will be helpful to molecularly design the advanced organic donor-acceptor blends for energy efficient photovoltaic applications.

Photoinduced Nickel-Catalyzed Homolytic C(sp3)-N Bond Activation of Isonitriles for Selective Carbo- and Hydro-Cyanation of Alkynes.

The exploration of strong chemical bonds as synthetic handles offers new disconnection strategies for the synthesis of functionalized molecules via transition metal catalysis. However, the slow oxidative addition rate of these covalent bonds to a transition metal center hampers their synthetic utility. Here, we report a C(sp3)-N bond activation strategy that bypasses thermodynamically challenging 2e- or 1e- oxidative addition via a distinct pathway in nickel catalysis. This strategy leverages a previously unknown activation pathway of photoinduced inner-sphere charge transfer of low-valent nickel(isonitriles), triggering a C(sp3)-N bond cleavage distal to the metal-ligand interaction to deliver nickel(cyanide) and versatile alkyl radicals. Utilizing this catalytic strategy, the selective intermolecular 1,2-carbocyanation reaction of alkynes with alkyl isonitriles as both alkylating and cyanating agents can be achieved, delivering a wide array of trisubstituted alkenyl nitriles with excellent atom-economy, regio-, and stereoselectivity under mild conditions. Furthermore, Markovnikov-selective hydrocyanation of aliphatic alkynes can be accomplished through the synergistic action of a photocatalyst utilizing isonitriles as the cyanation agents. Mechanistic investigations support the photogeneration of low-valent Ni(isonitrile) complexes that undergo photochemical homolysis of the C(sp3)-N bond to engage catalytic cyanation with alkynes.

Photoinduced Charge Transfer Empowers Ta4C3 and Nb4C3 MXenes with High SERS Performance.

This study introduces two-dimensional (2D) Ta4C3 and Nb4C3 MXenes as outstanding materials for surface-enhanced Raman scattering (SERS) sensing, marking a significant departure from traditional noble-metal substrates. These MXenes exhibit exceptional SERS capabilities, achieving enhancement factors around 105 and detection limits as low as 10-7 M for various analytes, including environmental pollutants and drugs. The core of their SERS functionality is attributed to the robust interfacial photoinduced charge-transfer interactions between the MXenes and the adsorbed molecules. This deep insight not only advances our understanding of MXene materials in SERS applications but also opens new avenues for developing highly sensitive and selective SERS sensors. The potential of Ta4C3 and Nb4C3 MXenes to revolutionize SERS technology underscores their importance in environmental monitoring, food safety, and beyond.

Boosting the Efficiency of Red Thermally Activated Delayed Fluorescence via Conjugation Enhancement in Push-Pull Naphthalimide Derivatives.

In this work, we synthesize a series of push-pull compounds bearing naphthalimide as the electron acceptor and tetraphenylethylene (TPE)/triphenylamine (TPA)/phenothiazine (PTZ) as the electron rich/electron donor units. These moieties are arranged in highly conjugated quadrupolar structures. The structure-property relationships are investigated through a joint experimental time-resolved spectroscopic and computational TD-DFT study. The femtosecond transient absorption and fluorescence up-conversion experiments reveal ultrafast photoinduced intramolecular charge transfer. This is likely the key factor leading to efficient spin-orbit CT-induced intersystem crossing for the TPA- and PTZ-derivatives as well as to small singlet-to-triplet energy gap. Consequently, evidence for a delayed fluorescence component is found together with the main prompt emission in the fluorescence kinetics both in solution and in thin film. The weight of the Thermally Activated Delayed Fluorescence (TADF) is greatly enhanced when these fluorophores are used as guests in solid-state host matrices. TADF is interestingly revealed in the orange-red region of the visible. Such long wavelength emission is here observed with surprisingly large fluorescence quantum yields, thanks to the conjugation enhancement achieved in these newly synthesized structures relative to previous studies. Our findings may be thus promising for the future development of efficient third generation TADF-based OLEDs.

Photoinduced charge transfer in small-molecule organic solar cells dependent on external electric field

In this paper, MTDATA is selected as the electron donor and BPhen as the acceptor. The trianiline structure of the donor molecule provides a variety of charge transfer pathways for charge separation. Based on Marcus theory, the photoinduced charge transfer properties of non-fullerene acceptor organic solar cells (NFA-OSCs) in external electric field (Fext) were studied. By analyzing the changes of reorganization energy (λ), Gibbs free energy (ΔG), electron transfer integral (Vda) and charge transfer rate under the influence of Fext, it was found that Fext can effectively regulate the charge transfer. Moreover, the change of charge transfer rate under Fext is similar to Vda, indicating that Vda is the main factor affecting charge transfer rate. To a certain extent, this study provides theoretical support for improving the photoelectric performance of NFA-OSCs.

Cocatalyst Embedded Ce-BDC-CeO2 S-Scheme Heterojunction Hollowed-Out Octahedrons With Rich Defects for Efficient CO2 Photoreduction.

Constructing heterojunction photocatalysts with optimized architecture and components is an effective strategy for enhancing CO2 photoreduction by promoting photogenerated carrier separation, visible light absorption, and CO2 adsorption. Herein, defect-rich photocatalysts (Ni2P@Ce-BDC-CeO2 HOOs) with S-scheme heterojunction and hollowed-out octahedral architecture are prepared by decomposing Ce-BDC octahedrons embedded with Ni2P nanoparticles and subsequent lactic acid etching for CO2 photoreduction. The hollowed-out octahedral architecture with multistage pores (micropores, mesopores, and macropores) and oxygen vacancy defects are simultaneously produced during the preparation process. The S-scheme heterojunction boosts the quick transfer and separation of photoinduced charges. The formed hollowed-out multi-stage pore structure is favorable for the adsorption and diffusion of CO2 molecules and gaseous products. As expected, the optimized photocatalyst exhibits excellent performance, producing CO with a yield of 61.6µmolh-1g-1, which is four times higher than that of the original Ce-BDC octahedrons. The X-ray photoelectron spectroscopy, scanning Kelvin probe, and electron spin resonance spectroscopy characterizations confirm the S-schematic charge-transfer route. The key intermediate species during the CO2 photoreduction process are detected by in situ Fourier transform infrared spectroscopy to support the proposed mechanism for CO2 photoreduction. This work presents a synthetic strategy for excellent catalysts with potential prospects in photocatalytic applications.

Green-light Hydrosilylation Photocatalysis with Platinum(II)Metalla-N-Heterocyclic Carbene Complexes.

Platinum(II) metalla-N-heterocyclic carbene complexes featuring pyridyl heterocyclic moiety demonstrate remarkable catalytic efficiency in alkyne hydrosilylation under green light irradiation. The photocatalytic properties of complexes are rationalised by the photo-induced charge transfer occurring in extended condensed system identified with the help of various experimental (UV/vis and emission spectroscopy, cyclic voltammetry) and theoretical methods (DFT/TD-DFT, IFCT analysis).

The coexistence of highly dispersed Pt2+ and Pt0 co-catalysts on chemically oxidized g–C3N4 via metal-support interaction: The effect of reduction time on Pt species and hydrogen evolution of Pt/g-C3N4 photocatalysts

Platinum (Pt) cocatalyst greatly enhances the photoactivity of the graphitic carbon nitride (g-C3N4) photocatalyst for photocatalytic H2 evolution where the Pt properties are critical to determine the photocatalytic activity. In this study, highly dispersed Pt was successfully loaded onto chemically oxidized g–C3N4 (OCN) via a hydrogen reduction process over different reduction time. OCN photocatalysts containing highly dispersed Pt2+/Pt0 exhibited outstanding charge separation efficiency and photocatalytic performance. Symmetrical –CO groups on the OCN surface specifically interacted with atomic Pt2+, and the Pt2+ atoms were stably reduced to Pt0 atoms along with the generation of –OH groups over time. The coexistence of Pt0 and Pt2+ promoted superior photocatalytic performance because the photoinduced charge transfer was facilitated by the Pt0 atoms, which was evidenced by the DFT calculation and the EIS, PL, and photocurrent response results. Consequently, after the 24 h reduction, the highly stable and active Pt2+/Pt0 atoms were effectively distributed over OCN, resulting in the highest HER activity at 4091.3 µmol g−1 h−1.

Single-Particle Imaging Photoinduced Charge Transfer of Ferroelectric Polarized Heterostructures for Photocatalysis.

Piezoelectric-assisted photocatalysis has a huge potential in solving the energy shortage and environmental pollution problems, and imaging their detailed charge-transfer process can provide in-depth understanding for the development of high-active piezo-photocatalysts; however, it is still challenging. Herein, topotactic heterostructures of TiO2@BaTiO3 (TO@BTO-S) were constructed by the epitaxial growth of ferroelectric BaTiO3 mesocrystals on TiO2-{001} facets, resulting in a ferroelectric photocatalyst with a polarization orientation on the surface. Notably, the photoinduced charge transfer in ferroelectric TiO2@BaTiO3 was accurately monitored and directly visualized at the single-particle level by the advanced photoluminescence (PL) imaging microscopy systems. The longer PL lifetime of TO@BTO-S demonstrated the efficient charge separation caused by a built-in electric field, which is constructed by the polarization orientation of BaTiO3 mesocrystals. Therefore, the TO@BTO-S heterostructure exhibits efficient piezoelectric-assisted photocatalytic pure water splitting, which is 290 times higher than photocatalysis. This work revealed time/spatial-resolved photoinduced charge transfer in piezoelectric assistance photocatalysts at the single-particle level and demonstrated the great role of polarization orientation in promoting charge transfer for photocatalysis.

From Ultrafast Photoinduced Small Polarons to Cooperative and Macroscopic Charge-Transfer Phase Transition.

We study by femtosecond infrared spectroscopy the ultrafast and persistent photoinduced phase transition of the Rb0.94Mn0.94Co0.06[Fe(CN)6]0.98 ⋅ 0.2H2O material, induced at room temperature by a single laser shot. This system exhibits a charge-transfer based phase transition with a 75 K wide thermal hysteresis, centred at room temperature, from the low temperature Mn3+-N-C-Fe2+ tetragonal phase to the high temperature Mn2+-N-C-Fe3+ cubic phase. At room temperature, the photoinduced phase transition is persistent. However, the out-of-equilibrium dynamics leading to this phase is multi-scale. Femtosecond infrared spectroscopy, particularly sensitive to local reorganizations through the evolution of the frequency of the N-C vibration modes with the different characteristic electronic states, reveals that at low laser fluence and on short time scale, the photoexcitation of the Mn3+-N-C-Fe2+ phase creates small charge-transfer polarons [Mn2+-N-C-Fe3+]* within ≃250 fs. The local trapping of photoinduced intermetallic charge-transfer is characterized by the appearance of a polaronic infrared band, due to the surrounding Mn2+-N-C-Fe2+ species. Above a threshold fluence, when a critical fraction of small CT-polarons is reached, the macroscopic phase transition to the persistent Mn2+-N-C-Fe3+ cubic phase occurs within ≃ 100 ps. This non-linear photo-response results from elastic cooperativity, intrinsic to a switchable lattice and reminiscent of a feedback mechanism.

Construction of a novel multidimensional 1D/2D heterojunction FeVO4/In2S3 with significantly reinforced charge transport and excellent photocatalytic activity

Aiming at developing a highly efficient photocatalyst for the photocatalytic degradation of emerging contaminants, a novel 1D/2D heterojunction FeVO4/In2S3 was constructed by the in-situ growing of the small-sized In2S3 nanosheets on the rod-shaped FeVO4. The fabricated FeVO4/In2S3 was in detail characterized. The photodegradation of tetracycline (TC) in water was carried out for the evaluation of the photocatalytic performance of FeVO4/In2S3. Additionally, the photoinduced charge transfer mode at the interface of FeVO4/In2S3 was discussed. The prepared FeVO4/In2S3 exhibits exceptional photocatalytic capability for the elimination of TC. The optimum composite photocatalyst 20%FVO/IS displays the greatest activity, achieving a removal efficiency of 90 % toward TC in water. The photodegradation rate constant of TC by 20%FVO/IS is 0.01362 min−1, which is 3.98 and 2.87 folds that by FeVO4 and In2S3, individually. The significantly reinforced activity of FeVO4/In2S3 is attributed to the improved light-harvesting ability in the visible region and the considerably accelerated separation and transfer of the photo-excited carriers resulting from the formation of 1D/2D multidimensional heterostructure between FeVO4 and In2S3. Additionally, FeVO4/In2S3 displayed outstanding stability. Its photocatalytic activity decreased by only 6 % after four cycles of reuse. The predominant reactive species for TC degradation is superoxide radical, followed by holes. Furthermore, the transport pathway of the photoexcited charge carriers in FeVO4/In2S3 complies with the Type-II interfacial charge transfer mode. The prepared FeVO4/In2S3 is a potential photocatalytic material for the photodegradation of the contaminants in water environment.

Photoinduced charge transfer assisted through external electric field and ternary hydrogen bonding strategies

Understanding the mechanisms governing interfacial charge transfer in photoactive layer is crucial for optimizing photogenerated charge separation efficiency. In this study, the interfacial charge transfer process is regulated by applying external electric field (Fext) and ternary hydrogen bonding strategies. We observe significant changes in the excited state properties and charge transfer parameters at the interface under Fext conditions. This facilitates an in-depth exploration of the effects of Fext on the microscopic details of the interface at the molecular level. Implementing the ternary hydrogen bonding strategy significantly enhances the electron-attracting ability of fullerene. Comparative analysis of the PTB7-Th:PC71BM and PTB7-Th:C7:PC71BM systems under Fext = 0, reveals that the ternary hydrogen bonding strategy increases the charge transfer pathway and significantly improves the intermolecular charge separation rate (KCS). Additionally, we evaluated the relationship between hydrogen bond strength and Fext, demonstrating that Fext significantly enhances the hydrogen bond strength between C7:PC71BM. These studies provide deeper insights into the role of Fext and ternary hydrogen bonding strategies in charge transfer process, providing a valuable theoretical framework for designing more efficient organic solar cells (OSCs).

Control of Photoinduced Charge Transfer Through Selective Cyanation of Spirofluorene‐Bridged N‐Heterotriangulenes (Advanced Optical Materials 27/2024)

Control of Photoinduced Charge Transfer Through Selective Cyanation of Spirofluorene‐Bridged <i>N</i>‐Heterotriangulenes (Advanced Optical Materials 27/2024)

PH selective fluorometric detection of E. coli using water soluble polyphenothiazine

This work has investigated the use of a novel cationic conjugated polymer, Poly 10-(6-(3-methylimidazolidin-l-yl)hexyl)−9-Phenothiazine (PMP), as a sensing platform for a polymer-based fluorescence sensor for the detection of E. Coli O157:H7. Fourier Transform Infrared Spectroscopy (FTIR), ultraviolet radiation (UV), proton nuclear magnetic resonance (1HNMR), and photoluminescence (PL) analysis were used to characterise the synthesised polymer. The electrostatic interaction between single strand genomic DNA of E.coli (tDNA) and cationic polymer resulted in photoinduced charge transfer (PET) mediated quenching of the fluorescence intensity of PMP, which has been utilized as a tool for the detection DNA of E. coli (tDNA), since the decrease in photoluminescence intensity of cationic polymer was found to be proportional to the concentration of tDNA. The biosensor developed using PMP exhibits sensitive detection of tDNAin the range of 10−18 to 10−21 M concentration with a lowest detection limit of tDNA is 1 × 10−21 M.

Synthesis of model heterojunction interfaces reveals molecular-configuration-dependent photoinduced charge transfer

Control of the molecular configuration at the interface of an organic heterojunction is key to the development of efficient optoelectronic devices. Due to the difficulty in characterizing these buried and (probably) disordered heterointerfaces, the interfacial structure in most systems remains a mystery. Here we demonstrate a synthetic strategy to design and control model interfaces, enabling their detailed study in isolation from the bulk material. This is achieved by the synthesis of a polymer in which a non-fullerene acceptor moiety is covalently bonded to a donor polymer backbone using dual alkyl chain links, constraining the acceptor and donor units in a through space co-facial arrangement. The constrained geometry of the acceptor relative to the electron-rich and -poor moieties in the polymer backbone can be tuned to control the kinetics of charge separation and the energy of the resultant charge-transfer state giving insight into factors that govern charge generation at organic heterojunctions.

Proton transfer induced persistent triplet charge transfer phosphorescence in molecule-doped polymer systems

The intermolecular interactions between small molecules and the matrix in a highly polar environment could easily lead to non-radiative transitions, which significantly hampers the development of high-performance persistent room-temperature phosphorescence (pRTP) materials in such condition. Herein, we introduce a novel strategy that integrates consecutive proton transfer and photo-induced charge transfer to facilitate triplet charge transfer emission in highly polar polymer matrix. In particular, doping aza-arene guests including 1,10-phenanthroline (1,10-Phen), 2,9-dimethyl-1,10-phenanthroline (DM-Phen), and 7,8-benzoquinoline (7,8-BQ) into polyacrylic acid (PAA) resulted in superior pRTP properties compared to other polymer hosts. Spectroscopic investigations and theoretical calculations elucidate that this is attributed to the proton transfer and triplet charge transfer characteristics between the host and guest. Moreover, due to the rigid environment and space confinement provided by PAA, pRTP with the lifetime up to 841 ms is achieved. Capitalizing on the excellent water solubility of the doped PAA films, the inkjet printings have been executed, and showcasing the promising the potential applications of these pRTP materials in the field of information encryption.

A Dye-Sensitized Sensor for Oxygen Detection under Visible Light.

Sensors that can accurately assess oxygen (O2) concentrations in real time are crucial for a wide range of applications spanning personal health monitoring, environmental protection, and industrial process development. Here a high-performance chemiresistive sensor that allows for the rapid detection of O2 at room temperature under visible light illumination is described. Inspired by the operating principles of dye-sensitized solar cells, the chemiresistor is based on a single-walled carbon nanotube-titania hybrid (SWCNT-TiO2) bearing a molecular Re-based photosensitizer [(Pbpy)(CO)3ReBr] (Pbpy = 4,4'-[P(O)(OH)2]2-2,2'-bipyridine). The resulting SWCNT-TiO2-Re composite undergoes photoinduced charge transfer that is sensitive to ppb levels of O2, thereby yielding a rapid and reversible chemiresistive response. Owing to its unique mode of operation and robust components, the sensor shows a high degree of selectivity for O2 over a range of interferants, humidity tolerance, and multimonth benchtop stability. The approach presented herein demonstrates the translatability of concepts in light harvesting to the development of robust, rapid, and low-power sensing technologies.

Development of superhydrophilic ZnOX/TiO2 with visible light-induced self-cleaning and antibacterial properties

Many studies aimed to improve the antibacterial ability and applicability of antibacterial surface materials by altering their chemical composition and structure. In this study, we successfully prepared a multifunctional ZnOX/TiO2 (0<X ≤ 2) nanocomposites by a sol-gel method, which exhibits visible light responsive self-cleaning, antibacterial adhesion, and antimicrobial properties. In the comparison of the three zinc sources, it was found that the ZnOX/TiO2 prepared with zinc sulfate doping had a water contact angle of only 1.7°, with enhanced hydrophilicity, and exhibited the best photocatalytic activity under visible light, with a removal rate of up to 90.2% of methylene orange (MO). Antibacterial tests revealed the average diameters of the inhibition halos for Escherichia coli and Staphylococcus aureus were 10 and 12 mm, respectively, thereby showing excellent antibacterial activity under visible light. The low photogenerated electron-hole recombination and the high rates of ·OH and ·O2- generation through photo-induced interface charge transfer in ZnOX/TiO2 composite, which is the main reason for enhancing the photocatalytic antibacterial activity under visible light irradiation. Release of Zn2+ species, resulting in significant antibacterial performance even under dark conditions. This study combines doping and surface modification, introduce abundant surface hydroxyl groups to endow the composite material surface with superhydrophilicity, anti-bacterial adhesion, and antibacterial properties that can meet the needs of clean and antibacterial surfaces in medical.