Phosphonate Groups Research Articles

Grafting of phosphonylated polymers onto 3D printed polycaprolactone scaffolds improves osteoblasts proliferation and calcium mineralization in-vitro

Prosthesis implantation or bone grafting are currently used to treat bone defects induced by osteoporosis, bone tumors or fractures. However, these conventional surgical techniques can lead to significant complications, including infection, loosening, and rejection. Consequently, additional surgeries or even amputation of the affected limb may become necessary. In this context, advancing the strategies used for bone repair remains a critical challenge. The present preliminary study outlines a method for developing biodegradable and bioactive PCL implants with improved osteoblast biological response for bone regeneration., vinylbenzylphosphonic acid (VBP) monomer was grafted and polymerized onto the 3D printed cylindrical polycaprolactone (PCL) implants using a two-step UV irradiation process. To refine and optimize the grafting conditions, key parameters such as ozonation time, UV irradiation duration, and reaction medium were adjusted. The success of the grafting process was assessed using various characterization techniques, including colorimetry, contact angle measurements, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Attenuated Total Reflection-Fourrier Transform Infrared Spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), and size-exclusion chromatography (SEC). Furthermore, a study of the cellular response focusing on viability, morphology, and mineralization was conducted using mouse preosteoblasts (MC3T3-E1 cell line). The results demonstrated the beneficial effects of grafting a bioactive polymer containing a phosphonate group onto implant surfaces.

A Flexible Phosphonate Metal-Organic Framework for Enhanced Cooperative Ammonia Capture.

Ammonia (NH3) production in 2023 reached 150 million tons and is associated with potential concomitant production of up to 500 million tons of CO2 each year. Efforts to produce green NH3 are compromised since it is difficult to separate using conventional condensation chillers, but in situ separation with minimal cooling is challenging. While metal-organic framework materials offer some potential, they are often unstable and decompose in the presence of caustic and corrosive NH3. Here, we address these challenges by developing a pore-expansion strategy utilizing the flexible phosphonate framework, STA-12(Ni), which shows exceptional stability and capture of NH3 at ppm levels at elevated temperatures (100-220 °C) even under humid conditions. A remarkable NH3 uptake of 4.76 mmol g-1 at 100 μbar (equivalent to 100 ppm) is observed, and in situ neutron powder diffraction, inelastic neutron scattering, and infrared microspectroscopy, coupled with modeling, reveal a pore expansion from triclinic to a rhombohedral structure on cooperative binding of NH3 to unsaturated Ni(II) sites and phosphonate groups. STA-12(Ni) can be readily engineered into pellets or monoliths without losing adsorption capacity, underscoring its practical potential.

Breathing effect in a Tetrapodal Lanthanide‐Phosphonate Organic Framework

The highly flexible organic linker hexamethylenediamine‐N,N,N’,N’‐tetrakis(methylphosphonic acid) (H8htp) was used in the preparation of a new 3D MOF formulated as [La2(SO4)2(H6htp)(H2O)4]∙2H2O (UAV‐15) by using hydrothermal synthesis. The flexibility of the organic linker posed a serious challenge in the preparation of crystalline materials: for this, the judicious selection of sulfuric acid to act as a mineralizing agent proved to be instrumental, acting in the retardation of the coordination of the phosphonic acid groups, as well as being an integral part the UAV‐15 by coordinating to the metal center. The material is a 3D network having channels filled with crystallization water molecules that can be easily removed by increasing of temperature (120ºC for 24h), leading to a single‐crystal‐to‐single‐crystal transformation originating [La2(SO4)2(H6htp)(H2O)3] (UAV‐15d). This transformation maintains the overall topology of UAV‐15 with only a small distortion of the framework. The reversibility of this transformation was studied, with the material reverting naturally to its original structure at ambient conditions for a period of 3 months or, in a faster way, when immersed in water at 120 ºC for 24h.

Mussel-Inspired, Self-Healing, Highly Effective Fully Polymeric Fire-Retardant Coatings Enabled by Group Synergy.

Fire-retardant coatings represent a universal cost-effective approach to providing fire protection for various substrates without compromising substrates' bulk properties. However, it has been attractive yet highly challenging to create waterborne polymeric fire-retardant coatings combining high-efficiency, generally strong adhesion, and self-repairability due to a lack of rational design principles. Inspired by mussel's unique adhesive, self-healing, and char-forming mechanisms, herein, a "group synergy" design strategy is proposed to realize the combination of self-healing, strong adhesion, and high efficiency in a fully polymeric fire-retardant coating via multiple synergies between catechol, phosphonic, and hydroxyethyl groups. As-created fire-retardant coating exhibits a rapid room-temperature self-healing ability and strong adhesion to (non)polar substrates due to multiple dynamic non-covalent interactions enabled by these groups. Because these functional groups enable the formation of a robust structurally intact yet slightly expanded char layer upon exposure to flame, a 200µm-thick such coating can make extremely flammable polystyrene foam very difficult to ignite and self-extinguishing, which far outperforms previous strategies. Moreover, this coating can provide universal exceptional fire protection for a variety of substrates from polymer foams, and timber, to fabric and steel. This work presents a promising material design principle to create next-generation sustainable high-performance fire-retardant coatings for general fire protection.

Defect passivation with spectral shift for improved efficiency and stability of quasi-2D blue perovskite light emitting diodes

Metal halide perovskites are emerging as promising materials for next-generation light-emitting diodes (LEDs), owing to their cost-effectiveness, facile manufacturing, and excellent optoelectronic properties including a narrow emission-line full width at half maximum, high photoluminescence quantum yield, and spectral stability. However, blue-emission perovskite LEDs (PeLEDs) exhibit perovskite phase segregation and halogen ion migration during operation, attributed to crystal defects, halogen vacancies, and phase instability of mixed-halide perovskites. These defects compromise the spectral stability of blue-emitting PeLEDs, resulting in an undesirable color shift toward longer wavelengths. In this study, we introduce a dynamic treatment with phenylphosphonic dichloride (PPOCl2) to address these challenges and achieve blue-emitting PeLEDs. The chloride in PPOCl2 penetrates the quasi-2D sky-blue perovskite, reducing halide defects. Meanwhile, the phosphonic group forms covalent bonds with undercoordinated Pb on the perovskites, effectively passivating defects. PPOCl2-treated perovskite exhibits a spectral blue shift toward a deep-blue wavelength (≤467 nm), enhancing electroluminescence performance. The quasi-2D PPOCl2-treated PeLEDs achieve a maximum external quantum efficiency of 2.31 % with an emission peak at 488 nm. Dynamic treatment with PPOCl2 shows the potential to improve the performance and stability of blue emission perovskite-based LEDs, providing a spectral shift mechanism to achieve deep-blue emission in PeLEDs.

Recent Advances in the Synthesis of Acyclic Nucleosides and Their Therapeutic Applications.

DNA is commonly known as the "molecule of life" because it holds the genetic instructions for all living organisms on Earth. The utilization of modified nucleosides holds the potential to transform the management of a wide range of human illnesses. Modified nucleosides and their role directly led to the 2023 Nobel prize. Acyclic nucleosides, due to their distinctive physiochemical and biological characteristics, rank among the most adaptable modified nucleosides in the field of medicinal chemistry. Acyclic nucleosides are more resistant to chemical and biological deterioration, and their adaptable acyclic structure makes it possible for them to interact with various enzymes. A phosphonate group, which is linked via an aliphatic functionality to a purine or a pyrimidine base, distinguishes acyclic nucleoside phosphonates (ANPs) from other nucleotide analogs. Acyclic nucleosides and their derivatives have demonstrated various biological activities such as anti-viral, anti-bacterial, anti-cancer, anti-microbial, etc. Ganciclovir, Famciclovir, and Penciclovir are the acyclic nucleoside-based drugs approved by FDA for the treatment of various diseases. Thus, acyclic nucleosides are extremely useful for generating a variety of unique bioactive chemicals. Their biological activities as well as selectivity is significantly influenced by the stereochemistry of the acyclic nucleosides because chiral acyclic nucleosides have drawn a lot of interest due to their intriguing biological functions and potential as medicines. For example, tenofovir's (R) enantiomer is roughly 50 times more potent against HIV than its (S) counterpart. We can confidently state, "The most promising developments are yet to come in the realm of acyclic nucleosides!" Herein, we have covered the most current developments in the field of chemical synthesis and therapeutic applications of acyclic nucleosides based upon our continued interest and activity in this field since mid-1990's.

Strategically Modified Ligand Incorporating Mixed Phosphonate and Carboxylate Groups to Enhance Performance in All‐Iron Redox Flow Batteries

AbstractIron redox flow batteries (Fe‐RFBs) hold significant promise for achieving cost‐effectiveness and utilizing abundant materials for stationary energy storage applications. Here, a design of a novel Fe complex utilizing a nitrogenous phosphonate/carboxylate mixed ligand, N,N‐Bis(phosphonomethyl)glycine (BMPG), is presented to achieve high performance Fe anolyte. Compared to its all‐phosphonate form, nitrilotri(methylphosphonic acid) (NTMPA), the new complex Fe(BPMG)2 demonstrates a negatively shifted redox potential, resulting in ≈0.07 V (≈10%) increase in battery output voltage. Full battery testing paired with ferrocyanide catholyte demonstrates stable cycling (capacity degradation <0.0001%/cycle) over 730 consecutive charge/discharge cycles with Coulombic Efficiency of 100% at a current density of 20 mA cm−2 under near neutral pH (≈8). Of particular interest, density functional theory (DFT) studies and operando Raman measurements provide strong evidence supporting a molecular structure in BPMG, which reveals the mixed phosphonate/carboxylate groups in BPMG maintain the octahedral coordination of the Fe ion center with phosphonates exclusively, while leaving the carboxylate unbound for both Fe(II) and Fe(III) complexes. This structural similarity between BPMG‐based Fe(II) and Fe(III) complexes effectively mitigates the slow redox reaction kinetics observed in Fe(NTMPA)2 anolyte, where significant ligand reorientation occurs between Fe(II) and Fe(III) complexes.

Ultra-High Adsorption Capacity of Calcium-Iron Layered Double Hydroxides for HEDP Removal through Phase Transition Processes.

Antiscalant disposal in reverse osmosis concentrate (ROC) treatment is a significant obstacle in desalination. This study investigated the adsorption performance of LDHs for removing 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP). CaFe-LDH presented a specific adsorption behavior and ultrahigh adsorption capacity for HEDP, with a maximum adsorption capacity of 335.7 mg P/g (1116.5 mg HEDP/g) at pH 7.0. X-ray diffraction (XRD) demonstrated that HEDP adsorption induced a structural transformation of CaFe-LDH from a layered configuration to a highly ordered structure, leading to a noticeable phase transition. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and Raman spectroscopy further confirmed that two distinct binding modes of HEDP, relating to chelation with Ca2+ and adsorption on Fe3+ simultaneously, are connected by phosphonic acid groups (-C-PO(OH)2), forming the CaFe-HEDP complex. X-ray fluorescence (XRF) and X-ray photoelectron spectroscopy (XPS) analyses revealed that the CaFe-HEDP ternary complex exhibits a highly ordered arrangement in an oxygen-bridged framework. The construction of an oxygen-coordinated framework contributes to the incorporation of more HEDP into CaFe-LDH, leading to a well-aligned lattice in the new phase. These findings provide valuable insights into developing novel LDH-based adsorbents for removing phosphorus-containing antiscalants, establishing a sustainable approach to ROC management, and potential environmental risk reduction.

A novel durable and soft cotton flame retardant containing phosphonamide phosphate ester with ammonium phosphonate group

A novel durable and soft cotton flame retardant containing phosphonamide phosphate ester with ammonium phosphonate group

Porous Metal Phosphonate Frameworks: Construction and Physical Properties.

ConspectusPorous metal phosphonate frameworks (PMPFs) as a subclass of metal-organic frameworks (MOFs) have promising applications in the fields of gas adsorption and separation, ion exchange and storage, catalysis, sensing, etc. Compared to the typical carboxylate-based MOFs, PMPFs exhibit higher thermal and water stability due to the strong coordination ability of the phosphonate ligands. Despite their robust frameworks, PMPFs account for less than 0.51% of the porous MOFs reported so far. This is because metal phosphonates are highly susceptible to the formation of dense layered or pillared-layered structures, and they precipitate easily and are difficult to crystallize. There is a tendency to use phosphonate ligands containing multiple phosphonate groups and large organic spacers to prevent the formation of dense structures and generate open frameworks with permanent porosity. Thus, many PMPFs are composed of chains or clusters of inorganic metal phosphonates interconnected by organic spacers. Using this feature, a wide range of metal ions and organic components can be selected, and their physical properties can be modulated. However, limited by the small number of PMPFs, there are still relatively few studies on the physical properties of PMPFs, some of which merely remain in the description of the phenomena and lack in-depth elaboration of the structure-property relationship. In this Account, we review the strategies for constructing PMPFs and their physical properties, primarily based on our own research. The construction strategies are categorized according to the number (n = 1-4) of phosphonate groups in the ligand. The physical properties include proton conduction, electrical conduction, magnetism, and photoluminescence properties. Proton conductivity of PMPFs can be enhanced by increasing the proton carrier concentration and mobility. The former can be achieved by adding acidic groups such as -POH and/or introducing acidic guests in the hydrophilic channels. The latter can be attained by introducing conjugate acid-base pairs or elevating the temperature. Semiconducting PMPFs, on the other hand, can be obtained by constructing highly conjugated networks of coordination bonds or introducing large conjugated organic linkers π-π stacked in the lattice. In the case of magnetic PMPFs, long-range magnetic ordering occurs at very low temperatures due to very weak magnetic exchange couplings propagated via O-P-O and/or O(P) units. However, lanthanide compounds may be interesting candidates for single-molecule magnets because of the strong single-ion magnetic anisotropy arising from the spin-orbit coupling and large magnetic moments of lanthanide ions. The luminescent properties of PMPFs depend on the metal ions and/or organic ligands. Emissive PMPFs containing lanthanides and/or uranyl ions are promising for sensing and photonic applications. We conclude with an outlook on the opportunities and challenges for the future development of this promising field.

Colloidal dispersions of cobalt ferrite nanoparticles in EMIM TFSI, propylene carbonate and their mixtures

Liquid thermocells are promising devices for the recovery of low-grade waste heat and its conversion into electricity. The present study proposes dispersing charged magnetic nanoparticles in liquids to improve thermoelectric conversion, due to their thermodiffusive and magnetic properties. Core@shell cobalt ferrite@maghemite nanoparticles (NPs) of various sizes with three different kinds of coatings are tested for dispersion in EMIM TFSI (ethyl-methylimidazolium bistriflimide), an ionic liquid (IL) of high electrical conductivity. Among the tested ligands, PAC6MIM±Br− (1-(6-hexylphosphonate) 3-methyl imidazolium bromide) emerges as the most efficient due to its phosphonic group. This ligand leads to dispersions of clusters of a few dozen NPs in water and a few NPs in EMIM TFSI. For improving both the viscosity and the electrical conductivity, dispersions in binary mixtures of propylene carbonate (PC), a polar medium, and EMIM-TFSI are further investigated with the sample based on NPs of ∼ 9 nm diameter. Through a pumping and heating procedure, stable dispersions are obtained with a subsequent reduction of the size of the NP clusters, down to 1 to 2 NPs in EMIM TFSI and a few NPs in PC and their binary mixtures. The mixture with an IL mole fraction ∼0.2–0.3 and maximal electrical conductivity is a promising candidate for further thermoelectric investigations.

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules.

The interface between the perovskite layer and electron transporting layer is a critical determinate for the performance and stability of perovskite solar cells (PSCs). The heterogeneity of the interface critically affects the carrier dynamics at the buried interface. To address this, a bridging molecule, (2-aminoethyl)phosphonic acid (AEP), is introduced for the modification of SnO2/perovskite buried interface in n-i-p structure PSCs. The phosphonic acid group strongly bonds to the SnO2 surface, effectively suppressing the surface carrier traps and leakage current, and uniforming the surface potential. Meanwhile, the amino group influences the growth of perovskite film, resulting in higher crystallinity, phase purity, and fewer defects. Furthermore, the bridging molecules facilitate the charge extraction at the interface, as indicated by the femtosecond transient reflection (fs-TR) spectroscopy, leading to champion power conversion efficiency (PCE) of 26.40% (certified 25.98%) for PSCs. Additionally, the strengthened interface enables improved operational durability of ≈1400 h for the unencapsulated PSCs under ISOS-L-1I protocol.

Crystal structure of a tris(2-amino-eth-yl)methane capped carbamoyl-methyl-phosphine oxide compound.

The mol-ecular structure of the tripodal carbamoyl-methyl-phosphine oxide compound diethyl {[(5-[2-(di-eth-oxy-phosphor-yl)acetamido]-3-{2-[2-(di-eth-oxy-phos-phor-yl)acetamido]-eth-yl}pent-yl)carbamo-yl]meth-yl}phospho-nate, C25H52N3O12P3, features six intra-molecular hydrogen-bonding inter-actions. The phospho-nate groups have key bond lengths ranging from 1.4696 (12) to 1.4729 (12) Å (P=O), 1.5681 (11) to 1.5811 (12) Å (P-O) and 1.7881 (16) to 1.7936 (16) Å (P-C). Each amide group adopts a nearly perfect trans geometry, and the geometry around each phophorus atom resembles a slightly distorted tetra-hedron.

Zirconium titanium phosphonates for enhanced lanthanide recovery from acidic wastes

Metal phosphonates show promise for recovery of valuable lanthanide (Ln) elements from acidic waste streams due to their selectivity, high capacity, fast kinetics and chemical stability. To optimise these properties, a balance is needed between free phosphonate groups available to bind Ln and P-O-metal linkages to provide stability. This work demonstrates how astute choice of metal precursors can be used to control the phosphonate structure and maximise both sorption and stability. Relative to single metal zirconium phosphonate, mixed metal zirconium titanium phosphonate sorbents had more free phosphonate groups and greater porosity, increasing Ln capacity by 30 % and the kinetic rate constant by 90 %. Acid stability was also improved upon Ti inclusion. Use of metal propoxide and tert-butoxide precursors were also compared, revealing different reactivities with Zr versus Ti. Specifically, the tert-butoxide precursor increased P-O-Zr linkages and acid stability with Zr, but increased formation of leachable P-O-Na2 groups in the presence of Ti that decreased acid stability. The optimised zirconium titanium phosphonate sorbent used metal propoxide precursors and a Zr:Ti molar ratio of 1:1 to achieve (1) selectivity for Ln over Co, Sr and Cs, (2) sorption capacity of approximately 70 mg Eu/g, (3) fast kinetics with > 99 % sorption in 10 min and (4) retention of 60 % sorption capacity after contact with 5 M nitric acid. The enhanced chemical stability, capacity and kinetics achieved via incorporating Ti drastically improves the practicality of these sorbents for Ln recovery from acidic leachates of magnets, phosphors and other wastes.

D113 resin in-situ loaded with Fe3+ to develop glyphosate adsorbent with the characteristics of salt-resistance and the remarkable saturated adsorption capacity

There are inorganic salts in glyphosate production liquor and natural water bodies coexisting with glyphosate. It is imperative to develop a salt-tolerant adsorbent for glyphosate in water. Industrial D113 resin undergone two-step transformation to optimize the preparation of D113 in-situ loaded with Fe3+ (D113-Fe3+) as salt-resistance glyphosate adsorbent. The loading amount of Fe3+ on D113-Fe3+ is 3.5 mmol/g. The adsorption mechanism revealed that Fe3+ in D113-Fe3+ formed Fe-O-P bond with the phosphonate group of glyphosate. At 293 K, the maximum complex ratio of the adsorbed glyphosate to Fe3+ in D113-Fe3+ was 2.4:1. At 293 K, the remarkable saturated glyphosate adsorption capacity of D113-Fe3+ reached 1420.2 mg/g. In pK2 state of glyphosate, D113-Fe3+ featured its maximum adsorption capacity at the zero charge point 2.43 of D113-Fe3+ and 293 K. In glyphosate solution coexisting 0–16 % NaCl, D113-Fe3+ exhibited stable glyphosate adsorption capacity and salt-resistance compared with D201, D301 and 330 resin. The endothermic and spontaneous adsorption of glyphosate on D113-Fe3+ can fit Freundlich model and pseudo-second-order model. 2 mol/L NH3·H2O, 2 mol/L FeCl3 and 2 mol/L H2SO4 could all regenerate D113-Fe3+. The characteristics of salt-resistance and the remarkable saturated adsorption capacity made D113-Fe3+ comparable to all reported glyphosate adsorbents.

Rh(III)-Catalyzed Regioselective Alkyne Insertion in the Context of C-H Activation and Lactonization Reactions: Synthesis of Fused 1,2-Oxaphospholenes.

Herein, we report an expedient synthesis of fused phosphorus-containing heterocycles via Rh-catalyzed cascade C-H activation, alkyne insertion, and lactonization reactions. The substrate scope and the group tolerance are good, as various substituted benzoic acids, N-methoxybenzamides, and 2-phenylindoles could go through the reactions smoothly to afford the corresponding products in moderate to high yields. Additionally, excellent regioselectivities are shown in the alkyne insertion with the assistance of an electron-withdrawing phosphonate group.

Local Coordination Environment of Lanthanides Adsorbed onto Cr- and Zr-based Metal-Organic Frameworks.

Separating individual lanthanide (Ln) elements in aqueous mixtures is challenging. Ion-selective capture by porous materials, such as metal-organic frameworks (MOFs), is a promising approach. To design ion-selective MOFs, molecular details of the Ln adsorption complexes within the MOFs must be understood. We determine the local coordination environment of lanthanides Nd(III), Gd(III), and Lu(III) adsorbed onto Cr(III)-based terephthalate MOF (Cr-MIL-101) and Zr(IV)-based Universitet in Oslo MOFs (UiO-66 and UiO-68) and their derivatives. In the Cr(III)- and Zr(IV)-based MOFs, Ln adsorb as inner-sphere complexes at the metal oxo clusters, regardless of whether the organic linkers are decorated with amino groups. Missing linkers result in favorable Ln binding sites at oxo clusters; however, Ln can coordinate to metal sites even with linkers in place. MOF functionalization with phosphonate groups led to Ln chemisorption onto these groups, which out-compete metal cluster sites. Ln form monodentate and bidentate and mononuclear and binuclear surface complexes. We conclude that MOFs for ion-selective Ln capture can be designed by a combination of (1) maximizing metal-lanthanide interactions via shared O atoms at the metal oxo cluster sites, where mixed oxo clusters can lead to ion-selective Ln adsorption, and (2) functionalizing MOFs with Ln-selective groups capable of out-completing the metal oxo cluster sites.

Anion exchange recovery of rhenium from industrial liquors followed by direct synthesis of a rhenium halide salt

In the present study, the sorption of perrhenate ions from sulfuric acid liquors was studied using three types of polymer ion exchange resins. An anion exchange resin type 1 (a copolymer of 2-methyl-5-vinylpyridine with divinylbenzene (VP-DVB)) as well as two polyfunctional resins containing anion and cation exchange functional groups, namely, type 2 (a carboxylated VP-DVB with pyridine-2-carboxylic acid (picolinic acid) functional group) and type 3 (an aminophosphorylated VP-DVB with pyridine-2-[(methylamino)methyl]phosphonic acid functional group), were studied. The resins before and after rhenium sorption were characterized by FT-IR spectroscopy and XPS spectroscopy. The incorporation of additional acidic functional groups into the polymer matrix of the VP-DVB resins led to a slight decrease in the rhenium anion exchange capacity. At the same time, polyfunctional resins make it possible to strip rhenium with hydrochloric acid. A completely new process for the preconcentration of rhenium as a halide compound, which will contribute to the low-cost production of metallic rhenium, can be implemented using these new polyfunctional resins. Column sorption experiments using real uranium leach liquors demonstrated an exchange capacity of 33.2 mg of Re per gram of resin and a concentration factor in the eluate of ∼2500. The possibility of anion exchange recovery of rhenium from uranium leach liquors by Type 3 resin followed by direct precipitation of potassium hexachlororhenate from hydrochloric acid desorption liquor was demonstrated. The present study provided a new resin for rhenium recovery with excellent adsorption and elution characteristics, which is a promising candidate for practical applications.

Role of self-assembled molecules’ anchoring groups for surface defect passivation and dipole modulation in inverted perovskite solar cells

Abstract Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication, low hysteresis effects, and high stability. Despite these advantages, their efficiency is currently limited by excessive defects and poor carrier transport at the perovskite–electrode interface, particularly at the buried interface between the perovskite and transparent conductive oxide (TCO). Recent efforts in the perovskite community have focused on designing novel self-assembled molecules (SAMs) to improve the quality of the buried interface. However, a notable gap remains in understanding the regulation of atomic-scale interfacial properties of SAMs between the perovskite and TCO interfaces. This understanding is crucial, particularly in terms of identifying chemically active anchoring groups. In this study, we used the star SAM ([2-(9H-carbazol-9-yl)ethyl] phosphonic acid) as the base structure to investigate the defect passivation effects of eight common anchoring groups at the perovskite–TCO interface. Our findings indicate that the phosphonic and boric acid groups exhibit notable advantages. These groups fulfill three key criteria: they provide the greatest potential for defect passivation, exhibit stable adsorption with defects, and exert significant regulatory effects on interface dipoles. Ionized anchoring groups exhibit enhanced passivation capabilities for defect energy levels due to their superior Lewis base properties, which effectively neutralize local charges near defects. Among various defect types, iodine vacancies are the easiest to passivate, whereas iodine-substituted lead defects are the most challenging to passivate. Our study provides comprehensive theoretical insights and inspiration for the design of anchoring groups in SAMs, contributing to the ongoing development of more efficient inverted perovskite solar cells.

Synthesis, Physical, and Mechanical Properties of Fluorinated Vinyl Copolymers Bearing Phosphonate Groups

Synthesis, Physical, and Mechanical Properties of Fluorinated Vinyl Copolymers Bearing Phosphonate Groups