Phenylboric Acid Research Articles

Synergistically Activated Aggregation-Induced Emission Probe for Precise In Situ Staining of Lipids in Atherosclerotic Plaques.

Visualizing the localization and distribution of lipids within arteries is crucial for studying atherosclerosis. However, existing lipid-specific probes face challenges such as strong hydrophobicity and nonspecific staining of lipophilic organelles or tissues, making them impractical for the precise identification of atherosclerotic plaques. To address this issue, we design a synergistically activated probe, Cbz-Lys-Lys-TPEB, which responds to cathepsin B (CTB) and H2O2 for the in situ generation of aggregation-induced emission luminogens (AIEgens). This enables specific staining of lipids within arteries and precise imaging of atherosclerotic plaques. The probe combines a tetraphenylethene building block with a hydrophilic peptide sequence (Cbz-Lys-Lys) and phenylboric acid module, providing excellent water solubility and fluorescence quenching in a molecular dispersion state. Upon interaction with H2O2 and CTB within plaques, the hydrophilic Cbz-Lys-Lys-TPEB probe is specifically cleaved and converted into hydrophobic AIEgens, leading to rapid aggregation and significant fluorescence enhancement. Interestingly, the in situ-liberated AIEgens display distinct lipid binding ability, effectively tracking the location and distribution of lipids in plaques. This synergistic target-activated AIEgen liberation strategy demonstrates significant feasibility for the reliable and accurate identification of atherosclerotic plaques, holding tremendous potential for clinical diagnosis and risk stratification of atherosclerosis.

Dopamine-assisted surface functionalization of saccharide-responsive fibers for the controlled harvesting and continuous fermentation of Saccharomyces cerevisiae

Continuous fermentation processes increasingly emphasized cell recycling, utilization, and renewal. In this study, to improve the sustainability of the immobilized Saccharomyces cerevisiae, the cells were recovered on the surface of the glucose-responsive supports through manipulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose. Through a dopamine (DA)-assisted deposition approach, 3-acrylamidophenylboronic acid (APBA) was integrated to design the saccharide-sensitive cotton fibers (APBA@PDA-CF). The optimal co-deposition time (5 h) and ratio (1:1) resulted in an impressive immobilization efficiency of 69.64%. Meanwhile, 93.23% of Saccharomyces cerevisiae was captured and harvested on the surface of APBA@PDA-CF with the fermentation course through regulating the competitive interactions of phenylboric acid groups between glycoproteins on the cells and glucose regardless of pH. Notably, a strong interaction between the yeast cells and APBA@PDA-CF was observed at a low glucose concentration (0.1～2 g/L), with reduced sensitivity at high glucose concentrations (>5 g/L). Moreover, the ethanol production and yield could be increased to 25.37 g/L and 42.4% in the fifth-batch fermentation, respectively. Therefore, based on the feasible and versatile co-deposition method, this study not only broadened the application scope of APBA, but also explored the broad prospects of smart materials in cell immobilization, recovery and continuous fermentation.

Multifunctional and immunoregulatory microenvironment-responsive hydrogel for whole course management of infected diabetic wounds

Infective diabetic wounds can significantly delay healing and pose severe infection risks. The process of infective diabetic wounds healing (DWH) are not only re-epithelialization and angiogenesis but also anti-bacterial, hair follicles regeneration and nerve growth. In this study, a stable dynamic hydrogel system was formulated by incorporating dynamic borate easter bond and carbon–carbon double bond, which based on tannic acid (TA) − acrylic phenyl boric acid (APBA) and acrylamide (AM). Subsequently, a hydrogel (ATAN-Met) was obtained by modifying the antibacterial ammonium cationic (N+) and loading metformin (Met). This system demonstrated impressive wet adhesion, self-healing, wearable and peelable properties, responding to glucose/reactive oxygen species (ROS) for drug release. In vitro and vivo experiments illustrated that ATAN-Met recruited mesenchymal stem cell (MSC), facilitating interaction between MSC and neural cells, regulating macrophage polarization, and modulating the diabetic wound microenvironment while exhibiting anti-bacterial property, ultimately leading to re-epithelialization and neurovascular-hair follicles regeneration. RNA and metabolomic sequencing indicated that ATAN-Met activate the Hippo pathway, inhibit the TNF pathway, and regulate wound metabolism to improve the diabetic wound microenvironment. These results suggest that the microenvironment-responsive ATAN-Met hydrogel shows considerable potential for the whole course management of infective DWH.

Properties, evaluation and application of naringin magnetic molecularly imprinted polymer based on synergistic imprinting strategy.

A novel and facile surface molecularly imprinted polymer coated on magnetic chitosan (Fe3O4@CS@MIP) was fabricated for the selective recognition and enrichment of naringin (NRG). The Fe3O4@CS@MIP was prepared based on covalent-noncovalent synergistic imprinting strategies, utilizing 4-vinyl phenyl boric acid as covalent functional monomer, deep eutectic solvent (choline chloride/methacrylic acid [ChCl/MAA]) as non-covalent functional monomer and Fe3O4@CS nanoparticles as the magnetic support. The obtained Fe3O4@CS@MIP exhibited a uniform morphology, excellent crystallinity, outstanding magnetic properties, and high surface area. Owing to the double recognition abilities, the resultant polymer showed exceptional binding performance and rapid mass transfer in phosphate buffer (pH 7.0). The maximum binding amount of Fe3O4@CS@MIP was found to be 15.08mgg-1, and the equilibrium adsorption could be achieved within 180min. Moreover, they also exhibited stronger selectivity for NRG and satisfactory reusability, with only 11.0% loss after five adsorption-desorption cycles. Additionally, the Fe3O4@CS@MIP, serving as an adsorbent, presented practical application potential in the separation and enrichment of NRG from pummelo peel, with extraction efficiency in the range of 79.53% to 84.63%. This work provided a new strategy for improving the performance of MIP and contributed an attractive option for the extraction of NRG in complex samples.

Construction of stable two-sided interface via the addition of phenylboric acid in Lithium-ion batteries

Electrolyte additive engineering is one of the most useful approaches to improve the interfacial property of electrode material in Li-ion batteries (LIBs), which plays a vital role in the mass transport during the electrochemical process. Boron-based electrolyte additives have a good application prospect, however exploring new additives with lower-cost and higher efficiency is still needed. In this study, Phenyl boric acid (PBA), acting as a two-sided interface modifier, is introduced to LiNi0.5Co0.2Mn0.3O2/SiC batteries. Through both theoretical calculations and experimental measurements, it is found that PBA could be preferentially reduced on the SiC anode and induce the formation of B-rich solid electrolyte interphase (SEI), which efficiently protects the anode material from the parasitic reaction. Besides, PBA can be sacrificially oxidized before other salt/solvent decomposition, achieving a highly-reversible lithiation/delithiation process at the cathode. Benefiting from these synergistic effects, the target Si-C/Li half-cells achieve a 2.5 % improvement in average coulomb efficiency of 100 cycles, while the capacity retention rate of NCM/Li half-cells and NCM/Si-C full cells increase by 21.4 % and 15.8 %, respectively. This work provides an effective approach to ameliorating the electrode interface chemistry of LIBs employing Si-based anodes Ni-rich cathodes and another analogous battery systems.

Notch-Targeted Therapeutic in Colorectal Cancer by Notch1 Attenuation Via Tumor Microenvironment-Responsive Cascade DNA Delivery.

The Notch signaling is a key molecular pathway that regulates cell fate and development. Aberrant Notch signaling can lead to carcinogenesis and progression of malignant tumors. However, current therapies targeting Notch pathway lack specificity and induce high toxicity. In this report, a tumor microenvironment-responsive and injectable hydrogel is designed to load plasmid DNA complexes as a cascade gene delivery system to achieve precise Notch-targeted gene therapy of colorectal cancer (CRC). The hydrogels are prepared through cross-linking between phenylboric acid groups containing poly(oligo(ethylene glycol)methacrylate) (POEGMA) and epigallocatechin gallate (EGCG), used to load the complexes between plasmid DNA encoding short hairpin RNAs of Notch1 (shNotch1) and fluorinated polyamidoamine (PAMAM-F) (PAMAM-F/shNotch1). In response to low pH and H2O2 in tumor microenvironment, the hydrogel can be dissociated and release the complexes for precise delivery of shNotch1 into tumor cells and inhibit Notch1 activity to suppress malignant biological behaviors of CRC. In the subcutaneous tumor model of CRC, PAMAM-F/shNotch1-loaded hydrogels can accurately attenuate Notch1 activity and significantly inhibit tumor growth without affecting Notch signal in adjacent normal tissues. Therefore, this therapeutic system can precisely inhibit Notch1 signal in CRC with high responsiveness and low toxicity, providing a promising Notch-targeted gene therapeutic for human malignancy.

Time-space regulating prodrug hydrogels for prevention of peritendinous adhesion

The bidirectional regulations of antiadhesion and regeneration are crucial for Achilles tendon injuries. However, the precise prevention and treatments of peritendinous adhesions both in time and space are still great challenges. Here, a series of time–space regulating prodrug (tannic acid (TA), epigallocatechin (EGC) and epigallocatechin gallate (EGCG)) hydrogels are designed for the prevention of peritendinous adhesion in Achilles tendon contusion and rupture injuries. In the term of space, the self-healing and deformable hydrogels prepared by crosslinking phenylboric acid (PBA) functionalized polyphosphazene (PZBA) with guar gum (GG) through ROS-responsive phenylborate ester (PBAE) can specifically aggregate to the high ROS sites via the ROS-responsive degradation and recombination of PBAE. Thus, providing support and acting as barriers to inhibit fibroblast proliferation. In the term of time, the prodrug strategy using ROS-responsive PBAE as bridging linker can achieve long-term anti-inflammatory effect over 2 weeks. Furthermore, the degradation time of hydrogels matched the course of peritendinous adhesion, thus achieved bidirectional regulations (decrease the gene expression of TGF-β1, COL-1 and COL-3 to antiadhesion in the early stage but increase them to promote regeneration in the late stage). This study presents a promising approach employing smart prodrug hydrogels with time–space regulating properties for prevention of peritendinous adhesion.

Ratiometric fluorescence detection of dopamine based on copper nanoclusters and carbon dots

Nanoclusters for fluorescence detection are generally comprised of rare and expensive noble metals, and the nanoclusters based on more affordable transition metal have attracted increasing attention. This study designed a ratiometric fluorescent probe to detect dopamine (DA), an important neurotransmitter. With carbon dots encapsulated within silica (CDs@SiO2) as the reference, the emitted reference signal was almost unchanged due to the protection of inert silicon shell. Meanwhile, copper nanoclusters modified with 3-aminophenyl boronic acid (APBA-GSH-CuNCs) provided the sensing signal, in which the phenylboric acid could specifically recognize the cis-diol structure of DA, and caused the fluorescence quenching by photoinduced electron transfer. This dual emission ratiometric fluorescent probe exhibited high sensitivity and anti-interference, and was able to selectively responded to DA with a linear range of 0–1.4 mM, the detection limit of 5.6 nM, and the sensitivity of 815 mM−1. Furthermore, the probe successfully detected DA in human serum samples, yielding recoveries ranging from 92.5% to 102.7%. Overall, this study highlights the promising potential of this ratiometric probe for detecting DA.

Anti-biofilm super-hydrophilic gel sensor for saliva glucose monitoring

Accurate detection of saliva glucose levels is crucail for diagnosing diabetes and oral diseases. However, the complex bacterial environment in the oral cavity presents challenges, particularly in reducing sensor sensitivity due to bacterial adhesion. The excellent self-cleaning capabilities of super-hydrophilic materials make them one of the top choices. To surpass the limitations of traditional super-hydrophilic materials, a Spin coating-Plasma treatment-Coprecipitation treatment (SPC) strategy was implemented to develop a super-hydrophilic gel saliva glucose sensor. Surface-initiated polymerization was used to form phenylboric acid hydrogels for glucose binding. A spin-coated transition layer protects the hydrogel, while plasma treatment and co-precipitation methods create a super-hydrophilic surface, providing antibacterial properties. The sensor demonstrated a remarkable ability to reduced bacterial adhesion of the five oral pathogenic bacteria by over 95 %, and significantly inhibited biofilm formation of Streptococcus pneumoniae and Streptococcus mitis by 95.7 % and 96.7 %, respectively. Its detection limit of 3.04 mg/L meets the requirements for saliva glucose detection. Overall, the development of this super-hydrophilic gel sensor holds great promise for wearable oral monitoring devices, offering new opportunities in healthcare managing and monitoring.

Boosting exciton dissociation in anion and cation co-doped polymeric semiconductor for selective oxidation reaction.

The inherently low dielectric properties and weak shielding effect of polymeric semiconductors cause excitons to dominate their photoexcitation process, which greatly restricts the photocatalytic performances mediated by charge carriers. Here, an anion and cation co-doping strategy was proposed to weaken the binding energy of excitons by forming distinct positive and negative charge regions, where the charge asymmetry produced an external potential to drive exciton dissociation. Using polymeric carbon nitride as a typical model framework, we show that the incorporation of anions (Cl-, Br-, I-) and cations (Na+, K+) could create a significant spatial separation of electrons and holes, thereby promoting exciton dissociation. Specifically, K+ and Cl- co-doped polymeric carbon nitride could effectively promote the dissociation of excitons into hot carriers, contributing to the outstanding efficiency in hot-electron-involved photocatalytic processes, such as the generation of superoxide radicals (O2˙-) and the oxidation of phenylboric acid under visible light. This work presents a practical approach for promoting excitons dissociation through the introduction of charge asymmetry.

A hydrogel system for drug loading toward the synergistic application of reductive/heat-sensitive drugs

The preparation of hydrogels as drug carriers via radical-mediated polymerization has significant prospects, but the strong oxidizing ability of radicals and the high temperatures generated by the vigorous reactions limits the loading for reducing/heat-sensitive drugs. Herein, an applicable hydrogel synthesized by radical-mediated polymerization is reported for the loading and synergistic application of specific drugs. First, the desired sol is obtained by polymerizing functional monomers using a radical initiator, and then tannic-acid-assisted specific drug mediates sol-branched phenylboric acid group to form the required functional hydrogel (New-gel). Compared with the conventional single-step radical-mediated drug-loading hydrogel, the New-gel not only has better chemical/physical properties but also efficiently loads and releases drugs and maintains drug activity. Particularly, the New-gel has excellent loading capacity for oxygen, and exhibits significant practical therapeutic effects for diabetic wound repair. Furthermore, owing to its high light transmittance, the New-gel synergistically promotes the antibacterial effect of photosensitive drugs. This gelation strategy for loading drugs has further promising biomedical applications.

Stimulation-responsive mucoadhesive probiotics for inflammatory bowel disease treatment by scavenging reactive oxygen species and regulating gut microbiota

Inflammatory bowel disease (IBD) is characterized by the high level of reactive oxygen species (ROS) and highly dysfunctional intestinal flora. Here, a stimulation-responsive mucoadhesive probiotic Lac@HDP was rationally constructed for achieving specific adhesion of colitis site and depleting high level of ROS in inflammatory site. Briefly, Lac is Lactobacillus acidophilus, HDP is obtained by hyaluronic acid grafted with dopamine protected by phenylboric acid. Specifically, by consuming a large amount of ROS, phenyl borate group of Lac@HDP is oxidized and fractured, thus exposing the catechol hydroxyl group and obtaining strong mucosal adhesion ability, thereby significantly prolong the retention time of Lac in the inflammatory site. In the murine model of acute and chronic colitis, the stimulation-responsive mucoadhesive probiotics were significantly more effective in alleviating colitis symptoms than antioxidants and probiotics alone. In addition, the abundance and diversity of intestinal flora were increased after treatment with Lac@HDP, which was helpful to alleviate IBD. Importantly, the stimulation-responsive mucoadhesive probiotics have good biological safety in vivo, which provides the prospect of clinical application in the future.

A nonenzymic microfiber optic-biosensor modified phenylboric acid for sensitively and specifically detecting low glucose concentration

A microfiber interferometer coated with sensitive films formed by amide bond between 3-Carboxy-4-fluorophenylboronic acid (FPBA) and polydopamine (PDA) for the detection of trace glucose concentration is designed and demonstrated. Due to a huge evanescent field, this microfiber interferometer has a very sensitive response to the refractive index (RI) of the surrounding environment, which has excellent sensing performance including RI sensitivity response of 1825.83 nm/RIU and low temperature response of −0.04 nm/°C. Due to the good film-forming performance of PDA, whose the amino group coupled with the carboxyl molecule on FPBA to form an amide bond, PDA/FPBA can be attached to the microfiber interferometer for detecting different concentrations of glucose. The concentration range of glucose detection is 0.1–20 mM with a sensitivity of 1.71 nm/mM and a limit of detection of 12.6 ppm. Finally, the sensor is tested in actual samples of human urine to detect different concentrations of glucose and proved to be responsive and reproducible in urine. We can estimate the concentration of glucose in urine by wavelength shift. The sensor has the advantages of simple manufacture, low cost, high sensitivity, and specific recognition glucose in urine. In addition, the success of this sensor shows that the combination of ultrafine fiber and organic chemical materials has broad prospects in the field of optical detection.

Nanoporous Vinylene-Linked 2D Covalent Organic Frameworks for Visible-Light-Driven Aerobic Oxidation

Exploring vinylene-linked nanoporous covalent organic framework (COF) materials has become a valuable research focus due to their various outstanding properties. However, only a few examples have been reported to construct vinylene-linked COFs, which seriously restricted their applications. Herein, two COFs linked by olefins TC-PT and TC-PB via the Knoevenagel condensation of 1,3,5-tris(4-cyanomethylphenyl) benzene and 2,4,6-tris (4-formylphenyl)-1,3,5-triazine or 1,3,5-tris (4-formylphenyl) benzene were designed and constructed, which possessed high crystallinity, remarkable porosity, and high structural, chemical, and thermal stability. The two nanoporous organic framework materials prepared can be used for catalytic organic reaction of phenylboric acid and its derivatives driven efficiently by visible light. It is noted that TC-PT with a donor–acceptor structure presented excellent activity, yield, and recyclability. We believed that this work would provide some precious insights for developing functional vinylene-linked COFs.

LDH@Boronate Polymer Core-Shell Nanoparticles: Nanostructure Design for Synergistically Enhancing the Flame Retardancy of Epoxy Resin.

As a promising nanofiller, layered double hydroxides (LDHs) can advance the fire safety of epoxy resin (EP), but so far, due to the problems of dispersion and low efficiency, it has still been a challenge to incorporate the flame retardancy and mechanical properties of EP nanocomposites effectively under the circumstance of a low additive amount. In this work, we take LDHs as the template, via the adsorption of a catechol group and the condensation polymerization between catechol groups and phenylboric acid groups, to prepare a core-shell structured nanoparticle LDH@BP, which contains rich flame-retardant elements. EP/LDH@BP nanocomposites were prepared by introducing LDH@BP into EP. The experimental results indicate that, compared with the original LDH, LDH@BP disperses uniformly in the EP matrix, and the flame retardancy and mechanical properties of EP/LDH@BP are significantly improved. At a relatively low content (5 wt%), EP/LDH@BP reached the rating of V-0 in the UL-94 test, LOI was increased to 29.1%, and peak heat release rate (PHRR) was reduced by 35.9% in cone calorimeter tests, which effectively inhibited the release of heat and toxic smoke during the combustion process of EP. Simultaneously, the mechanical properties of EP/LDH@BP have been improved satisfactorily. The above results derive from the reasonable architectural design of organic-inorganic nano-hybrid flame retardants and provide a novel method for the construction of efficient and balanced EP nanocomposite system with LDHs.

PH and non-enzymatic glucose response at ultra-low concentration using submicrochannel heterogeneous membrane

The construction of solid nanochannel-based biosensor with submicron pore size has great significance to the analysis of biomolecule with high sensitivity and low detection limit. In this paper, a submicrochannel heterogeneous membrane with asymmetric geometry is prepared as the base by combining thermo-crosslinked hydrophobic conducting polymer and porous anodic aluminium oxide channel (AAO) with submicron pore size (269 nm). After the polydopamine-Au multilayer assembly, a large number of Au nanoparticles with adjustable size (∼10 and 89 nm) and density are in situ generated and fixed on the inner wall of AAO. Then 4-mercapto phenylboric acid with high density is grafted through Au-S bond to construct the submicrochannel heterogeneous membrane with the characteristic of ion current rectification in response to pH and saccharide. Benefit from the blocking effect of hydrophobic conducting polymer and the multilayer assembly of polydopamine-Au, the current of background response by the membrane device is effectively reduced, the ion current rectification strength can be effectively regulated in the range of pH 3–9, and the response to ultra-low glucose concentration without enzyme is achieved in the linear range of 1 pM-0.1 μM. A universal substrate platform is provided for the construction of solid nanochannel-based biosensor with submicron pore size.

Tumor-Targeting Nanoassembly for Enhanced Colorectal Cancer Therapy by Eliminating Intratumoral Fusobacterium nucleatum.

Fusobacterium nucleatum (Fn) has long been found to be related to colorectal cancer (CRC), which could promote colorectal tumor progression and cause cancer resistance to chemotherapy. Great efforts have been made to understand the relationship between Fn and CRC, but how to efficiently eliminate intratumoral Fn and overcome chemoresistance remains a critical challenge. Here, an active tumor-targeting acidity-responsive nanomaterial toward eliminating intratumoral Fn is developed for enhancing the treatment of cancer. Lauric acid and phenylboric acid are conjugated to oligomethyleneimine to form OLP followed by interacting with oxaliplatin prodrug-modified polyglycidyl ether (PP) to obtain the OLP/PP nanoassembly. The nanoassembly shows good structural stability under the simulated physiological conditions and has a pH-responsive drug release in an acidic tumor microenvironment. More attractively, the nanoassembly can specifically target the tumor cell, guide cellular uptake, and efficiently eliminate tumor-resident extracellular and intracellular Fn. Through the on-site drug delivery, the nanoassembly can overcome chemoresistance and significantly inhibit tumor growth. Both in vitro and vivo studies show that the prepared nanoassembly presents good biocompatibility. Therefore, this biocompatible nanoassembly possessing efficient antibacterial and antitumor activities provides new promise for the therapy of bacterial infected tumors.

Multistage ROS-Responsive and Natural Polyphenol-Driven Prodrug Hydrogels for Diabetic Wound Healing.

The high level of reactive oxygen species (ROS) and bacterial infection impede wound healing of the diabetic wound. Here, benefiting from the antioxidation effects of tannic acid (TA) and ROS-responsive phenylborate ester (PBAE), a series of ROS-responsive anti-inflammatory TA-conjugated nanoparticle hydrogels (PPBA-TA-PVA) can be obtained by conveniently mixing TA, phenylboric acid modified polyphosphazene (PPBA), and poly(vinyl alcohol) (PVA). The obtained PPBA-TA-PVA hydrogels could effectively inhibit the growth of Escherichia coli (antibacterial rate = 93.1 ± 1.1%) within 4 h and effectively scavenge both 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals and •OH radicals in vitro. Besides, the cell migration rate of HDFa cells treated with PPBA-TA-PVA hydrogels (84.2 ± 4.6%) was twice the rate of normal cells (43.8 ± 8.1%) after 24 h of cocultivation. The clinical relevance was demonstrated further by assessing the PPBA-TA-PVA hydrogels in full-thickness excisional wounds in a streptozotocin (STZ)-induced diabetic rat model. The PPBA-TA-PVA hydrogels could act as effective ROS-scavenging agents to alleviate inflammation and accelerate wound closure by decreasing the proinflammatory cytokines (IL-6, IL-1β) and increasing the gene expression of TGF-β1, COL-1, and COL-3, which resulted in faster re-epithelialization and increased formation of granulation tissue.

Synthesis of Phenylboronic Acid-Functionalized Magnetic Nanoparticles for Sensitive Soil Enzyme Assays.

Soil enzymes, such as invertase, urease, acidic phosphatase and catalase, play critical roles in soil biochemical reactions and are involved in soil fertility. However, it remains a great challenge to efficiently concentrate soil enzymes and sensitively assess enzyme activity. In this study, we synthesized phenylboronic acid-functionalized magnetic nanoparticles to rapidly capture soil enzymes for sensitive soil enzyme assays. The iron oxide magnetic nanoparticles (MNPs) were firstly prepared by the co-precipitation method and then functionalized by (3-aminopropyl)triethoxysilane, polyethyleneimine and phenylboric acid in turn, obtaining the final nanoparticles (MNPPBA). Protein-capturing assays showed that the functionalized MNPs had a much higher protein-capturing capacity than the naked MNPs (56% versus 6%). Moreover, MNPPBA almost thoroughly captured the tested enzymes, i.e., urease, invertase, and alkaline phosphatase, from enzyme solutions. Based on MNPPBA, a soil enzyme assay method was developed by integration of enzyme capture, magnetic separation and trace enzyme analysis. The method was successfully applied in determining trace enzyme activity in rhizosphere soil. This study provides a strategy to sensitively determine soil enzyme activity for mechanistic investigation of soil fertility and plant–microbiome interaction.

Correlation of adsorbed and embedded palladium species in chitosan composite nanofibers with their catalytic activities for Suzuki reactions

Heterogeneous palladium catalysts play an important role in the synthetic organic chemistry. Palladium species have been adsorbed on the surface of solid matrices or embedded inside solid matrices to prepare recyclable heterogeneous catalysts. Due to the different surrounding environment, these two type palladium species had different electronic properties and catalytic performances. In this study, we fabricated three series of chitosan composite nanofibers with adsorbed and embedded palladium species. Their fiber morphologies and chemical structures were characterized by SEM and FT-IR, respectively. Positron annihilation lifetime spectra (PALS) showed that the intensities (I3) of o-Ps annihilations were all linearly decreased with the increase of palladium contents in the chitosan composite nanofibers. Moreover, compared with the palladium adsorbed chitosan composite nanofibers, the palladium embedded chitosan composite nanofibers had stronger o-Ps annihilation ability, which could be ascribed to the stronger electron donating property of embedded palladium species and higher crosslinking of chitosan molecules by embedded palladium species. At last, the I3 values were successfully correlated with the rate constants of chitosan supported palladium composite nanofibers catalyzed Suzuki reactions of iodobenzene with phenylboric acid. Therefore, we have developed a facile method to distinguish the adsorbed and embedded palladium species by PALS, which can be further related with their catalytic performance.