Multiple Phenomena Research Articles

Beyond samplism: Rethinking the field in exposure science.

Given the many forms of environmental pollution that have accompanied the global spread of industrial capitalism, there is an urgent need to carry out extensive assessments of the potential toxicity of many compounds on human and nonhuman populations. However, the scientific procedures developed to carry out such assessments present several critical shortcomings that greatly diminish their capacity to protect populations at risk. Through an ethnographic analysis of two field campaigns centered on the assessment of polluted sites in northern Chile, this article will reveal that these campaigns are embedded in what we can call samplism. Contrary to approaches that see fieldwork as generative spaces for knowledge creation, samplism radically simplifies the field into a neutral space for the collection of singular and well-defined lab-bound samples. However, samplism entails that multiple field phenomena relevant for assessing pollution levels are left completely unaccounted for, which greatly diminishes exposure science's overall capacity to help improve the lives of those in need. Thus, exposure science urgently needs todevelop more capacious forms of engagement with the field, an ecological fieldwork that truly represents the complexity of forces and processes behind contemporary processes of pollution and damage.

State Estimation for Measurement-Saturated Memristive Neural Networks with Missing Measurements and Mixed Time Delays Subject to Cyber-Attacks: A Non-Fragile Set-Membership Filtering Framework

This paper is concerned with the state estimation problem based on non-fragile set-membership filtering for a class of measurement-saturated memristive neural networks (MNNs) with unknown but bounded (UBB) noises, mixed time delays and missing measurements (MMs), subject to cyber-attacks under the framework of weighted try-once-discard protocol (WTOD protocol). Considering bandwidth-limited open networks, this paper proposes an improved set-membership filtering based on WTOD protocol to partially solve the problem that multiple sensor-related problems and multiple network-induced phenomena influence the state estimation performance of MNNs. Moreover, this paper also discusses the gain perturbations of the estimator and proposes an improved non-fragile estimation framework based on set-membership filtering, which enhances the robustness of the estimation approach. The proposed estimation framework can effectively estimate the state of MNNs with UBB noises, estimator gain perturbations, mixed time-delays, cyber-attacks, measurement saturations and MMs. This paper first utilizes mathematical induction to provide the sufficient conditions for the existence of the desired estimator, and obtains the estimator gain by solving a set of linear matrix inequalities. Then, a recursive optimization algorithm is utilized to achieve optimal estimation performance. The effectiveness of the theoretical results is verified by comparative numerical simulation examples.

Investigation on supersonic jet noise reduction by water injection: Effects of water injection parameters

In order to protect the payload and the rocket structure from severe vibrations, water injection is commonly used on launch pads to reduce the high noise level radiated by supersonic plumes at lift-off. Even if this technique is widely used, the mechanisms behind sound reduction remain unclear. Sound reduction occurs due to multiple phenomena, each of them having different effects on the jet noise. Experiments based on acoustic measurements have been carried out on a hot supersonic jet on MARTEL facility (Mach number of 3 and a total temperature of 1700 K) to deeper identify the effect of evaporation and water injection parameters. Water flow rate, water injection speed and injection distance to the nozzle have been tested independently to identify the most important water injection parameters. It appears that water flow rate is the most important parameter to decrease noise level and that injecting water at high speed results in noise increase in the downstream direction. Results also highlight the importance of having liquid droplets at the end of the potential core to reduce noise.

Magnesium-Induced Rapid Nucleation of Tetrahydrofuran Hydrates.

Hydrates are ice-like crystalline structures of hydrogen-bonded water molecules that trap a guest molecule. Hydrates have several applications, including carbon sequestration, gas separation, desalination, etc. A classical major challenge associated with artificial hydrate formation is the very long induction time to nucleate hydrates. This has spurred the development of multiple chemical, mechanical, and electrical strategies to promote nucleation. Presently, we discover that magnesium can significantly promote the nucleation of tetrahydrofuran (THF) hydrates. While magnesium has been recently shown (by our group) to promote the formation of carbon dioxide hydrates (gas-liquid system), this study discovers that the benefits of magnesium extend to liquid-liquid hydrate systems as well. Experiments show that magnesium reduces the induction time for THF hydrate nucleation with deionized (DI) water and saltwater by six and eight times, respectively. Magnesium-induced nucleation rate enhancements for hydrate formation with DI water and saltwater were 12 and 99 times, respectively. Importantly, we demonstrate near-instantaneous nucleation when magnesium is introduced after the hydrate-forming system reaches suitable thermodynamic conditions. We conduct statistically significant measurements of nucleation and XPS analysis to identify the underlying mechanisms responsible for nucleation. We discuss multiple phenomena at play, including chemical and mechanistic promotion pathways. The formation of hydrogen bubbles and the presence of magnesium ions in solution are seen as important to magnesium-based nucleation promotion. Importantly, very low amounts of Mg are consumed in this process unlike in traditional chemical promotion techniques. Overall, our discovery can enable on-demand nucleation of liquid-liquid hydrate systems, which is critical to the development of several applications.

COMSOL-Based Simulation of Microwave Heating of Al2O3/SiC Composites with Parameter Variations

The process of microwave heating involves the coupling of multiple physical phenomena, specifically including the distribution of the electromagnetic field in the resonant cavity. The electromagnetic effect generates heat and encourages the transfer of heat inside the material. In this numerical study, a 3D computer model of microwave heating of Al2O3/SiC composites using a multimode microwave heating chamber was established based on the simulation software COMSOL Multiphysics 5.6, and the symmetry treatment of the model was carried out, which effectively reduced the amount of model calculations and accurately analyzed the microwave heating characteristics of the samples. The analysis of the microwave heating characteristics of the sample was mainly preformed from the perspective of the electric field distribution in the resonant cavity, the sample heating rate and the sample heating uniformity, and then it was determined how the microwave source power and sample mold selection affect the temperature and electric field parameters of the sample. After experimental verification, the error between the simulation results and the temperature parameters obtained from the actual experiments is less than 2%. This study contributes to further understanding the heating behavior of Al2O3/SiC composites in complex multimode microwave heating environments and can be used to control the dynamic parameters during microwave heating in order to improve the heating rate and heating uniformity of samples.

A coherent microscopic picture for the exotic structure of 11Be

The neutron-rich nucleus 11Be is one of the most enigmatic exotic nuclei in the periodic table. It exhibits a multitude of unique and intriguing phenomena within a single nucleus, including the halo phenomenon, clustering structure, and parity inversion. A unified description of these exotic properties represents a significant challenge for the nuclear physics field. By employing the axially deformed relativistic Hartree-Fock-Bogoliubov (D-RHFB) model, we have successfully reproduced the parity inversion and the one-neutron halo in 11Be, and revealed the underlying cluster structure. It is found that the intrusion of the sd-shell, which results in the parity inversion, is coherently connected with the halo and cluster structures. In particular, the s-wave is responsible for the halo formation, and the mixing of 2s1/2- and 1d5/2-waves enhances the cluster structure. This work elucidates the coherence between the parity inversion and the halo/cluster structures of 11Be, and addresses the long-standing challenge of providing a unified explanation for the multiple exotic phenomena observed in 11Be.

Multiple spreading phenomena for a multistable reaction-diffusion equation with a free boundary

This paper deals with a nonlinear reaction-diffusion equation with a free boundary, where the nonlinearity has m+1 (m≥2) stable steady states and can be degenerate. Such problems may be used to model invasion phenomena with an expanding front. We focus on the long time dynamical behaviors of the solution, which can be classified into 2m+1 scenarios: vanishing, ith-spreading, and ith-transition for i=1,2,⋯,m. In particular, we observe m distinct types of spreading phenomena that correspond to m stable steady states. Additionally, we observe m different types of transition phenomena that correspond to m varieties of standing waves. Furthermore, by introducing a parameter to describe the initial function's amplitude, we demonstrate that there are m threshold values that guarantee the occurrence of each scenario.

Multiple sub-impacts phenomenon and influences on responses of elastic-plastic beam

The multiple sub-impact phenomenon, consisting of more than one short contact event, has frequently been observed in experiments and simulations. The multiple sub-impact phenomenon and its influences on impact responses lack systematic study. Hence, this paper presents a parametric analysis method, an extended hybrid, numerical-analytical model (EHNA model). The nature of multiple sub-impact responses of elastic-plastic beams struck by elastic-plastic spherical impactors is investigated parametrically. The occurrence and disappearance of multiple sub-impacts are observed. Their threshold curves are obtained and expressed analytically for low-velocity impacts. A characterization diagram is proposed to characterize the region of multiple sub-impacts in the relative stiffness ratio-effective mass ratio plane. The characterization diagram can be used to quickly predict the state of multiple sub-impacts or the state of a single impact without solving the impact responses in detail. It is validated experimentally and numerically for impacts with wide ranges of initial velocity, beam size, constraint, material property and contact type. The influences of multiple sub-impacts on impact force response, impact impulse, and energy loss are parametrically investigated. The high influence zones and several influence features are observed. The wide multiple sub-impact region proves that the multiple sub-impact phenomenon is ubiquitous. The strong influences on flexible beam impacts indicate that multiple sub-impacts cannot be neglected for structural damage and structural dynamics.

Phenomenological constitutive laws for the dissipative behaviour of highly compressible elastomers and their finite element implementation

This paper deals with the development of constitutive equations to model the mechanical behaviour of compressible elastomers. These materials are naturally incompressible but can be made compressible by the addition of hollow microspheres, for example. Such a material is referred to as syntactic foam. The CEA (French Commission for Atomic and Alternative Energies) employs such compressible materials as seals in complex structures to reduce the internal stresses in vulnerable components and prevent their failure. The behaviour of these structures is predicted by finite element simulations. It is important to know and model the mechanical behaviour of the seals. Like elastomers, they can undergo large deformations. The microspheres enable the material to undergo large volume change unlike pure elastomer that is nearly incompressible. This compressibility also intensifies dissipative phenomena encountered in elastomers such as viscosity or plasticity. Furthermore, the Mullins stress softening effect is also intensified even for loadings that only bring about volumetric changes. To model these behaviours, a phenomenological approach was developed based on the isochoric/volumetric decomposition of the deformation gradient. The method of intermediate dissipative configurations was employed to introduce multiple phenomena, including viscosity (with several characteristic times) and viscoplasticity, for these two parts of the deformation. The constitutive equations and their flow rules were implemented in Abaqus through a UMAT subroutine and using a numerical approach to define the tangent operator. The parameters of the behaviour law were identified using a model reduction technique known as shape manifold approach. The resulting model can be compared with experimental data.

Mechanism Analysis and Elimination of Multiple Pulse Phenomenon of Active Rectifier in Wireless Power Transfer Systems

Mechanism Analysis and Elimination of Multiple Pulse Phenomenon of Active Rectifier in Wireless Power Transfer Systems

Two-Coordinate Dinuclear Donor-Gold(I)-Acceptor Complexes Exhibiting Multiple Excitation Wavelength Dependent Phosphorescence.

Two-coordinate Au(I) complexes with a donor-metal-acceptor (D-M-A) structure have shown rich luminescent properties. However, charge-neutral dinuclear donor-metal-acceptor type Au(I) complexes featuring aurophilic interactions have been seldom explored. Herein, we describe the structures and photoluminescence properties of two dinuclear Au(I) complexes, namely DiAu-Ph and DiAu-Me. Single crystal X-ray structural analysis of DiAu-Ph reveals a short intramolecular Au-Au distance of 3.224 Å. In dilute solution and doped films, excitation wavelength dependent multiple phosphorescence phenomena were observed for these dinuclear complexes. Theoretical calculations reveal that the aurophilic interaction causes increased contribution of the Au d orbital to the highest occupied molecular orbitals. Thus, the gap between singlet and triplet excited states (ΔEST) is enlarged, which disables the thermally activated delayed fluorescence (TADF). Moreover, the large energy separation (0.45-0.52 eV) and the different orbital configurations between the various excited states result in an inefficient internal conversion, accounting for their multiple phosphorescence properties.

Integrated experimental and computational study on the effect of hydrogen in mechanical responses of pure tungsten

Hydrogen irradiation profoundly changes the microstructure and morphological characteristics of tungsten, ultimately resulting in the modifications to its mechanical properties. Unfortunately, the specific mechanisms through which hydrogen irradiation influences the mechanical behavior of tungsten have not been clearly elucidated. Therefore, this study aims to further improve the understanding of the impact of hydrogen irradiation on the mechanical responses and its microstructure dependence in tungsten by employing two advanced techniques: nano-indentation experiments and Molecular dynamics (MD) simulations. The experimental findings revealed that deuterium (D) exposure decreased the maximum shear stress required for the incipient plasticity and led to the occurrence of multiple pop-ins. Particularly noteworthy was the most remarkable change in mechanical behaviors observed prominently in the recrystallized tungsten after D exposure. The microstructure dependence of irradiation-induced change in mechanical responses was investigated by two series of MD simulation, indentation and dislocation glide simulation, focusing on the independent effects of each irradiation-induced defect type (interstitial, substitutional, vacancy, vacancy-hydrogen (Vac-H) cluster, void-hydrogen (Vo-H) cluster) on dislocation activities. Based on the MD simulations, it was eventually revealed that Vo-H clusters were the most influential agent affecting dislocation activities. They not only lowered the pop-in stress by heterogeneous dislocation nucleation but also caused strain serration by a continuous pinning/unpinning process during dislocation glide. Consequently, we concluded that the dominant presence of d-induced Vo-H clusters facilitated the onset of plastic yielding and led to multiple pop-in phenomena in recrystallized tungsten, whereas inserted hydrogen caused minimal change in mechanical responses by interacting with pre-existing dislocation in cold-rolled tungsten.

Effect of Fatigue and Precorrosion Fatigue on Fatigue Crack Propagation and Fracture Failure Behavior of 5B70 Aluminum Alloy

Aluminum alloys are ideal lightweight structural materials for spacecraft, but they are susceptible to local corrosion during service. Herein, a systematic investigation is carried out to determine the fatigue behavior of 5B70 aluminum alloy under salt spray precorrosion. The mechanism of salt spray corrosion, fatigue life, crack propagation, and failure fracture mechanism of 5B70 aluminum alloy are studied. Under the salt spray corrosion, 5B70 aluminum alloy mainly undergoes pitting corrosion via a galvanic corrosion mechanism. After precorrosion, the formation of macroscopic fatigue cracks is accelerated, which significantly reduces its fatigue life. Fracture occurs due to single crack initiation and propagation under fatigue conditions. The fatigue crack tip undergoes a mixture of intergranular and transgranular modes, but mainly transgranular mode. Multiple strain localization phenomena occur during precorrosion fatigue, and corrosion pits on the surface provide a tortuous crack propagation path; the fatigue crack tip is mainly transgranular mode.

Thermodynamic topology of D = 4,5 Horava Lifshitz black hole in two ensembles

In this paper, we investigate the thermodynamic topology of four and five-dimensional Hořava-Lifshitz (HL) black holes within Hořava gravity. To analyze their thermodynamic topology, we treat these HL black holes as topological defects in their thermodynamic spaces and compute the winding numbers at these defects. Our study is conducted in two different ensembles: the fixed ϵ ensemble and the fixed ζ ensemble, where ϵ is a parameter of the HL black holes, and ζ is its conjugate parameter. In the fixed ϵ ensemble, we consider three different horizon types: spherical (k=+1), flat (k=0), and hyperbolic (k=−1), while in the fixed ζ ensemble, we examine two horizon types: spherical (k=+1) and hyperbolic (k=−1). For all the aforementioned cases, we study the local and global topology of these black holes and classify them into topological classes based on their topological charges. We calculate the topological number for each case. This process uncovers some novel phase diagrams that reveal a number of multiple defect curve phenomenon. Additionally, we explore how the topological charge of these black holes depends on the values of the thermodynamic parameters. Our findings indicate that the thermodynamic topology of Hořava-Lifshitz black holes in D=4,5 is significantly influenced by the type of horizon, the choice of ensemble, the values of pressure, and the parameters ϵ or ζ.

Investigating laser beam shadowing and powder particle dynamics in directed energy deposition through high-fidelity modelling and high-speed imaging

Laser beam shadowing in directed energy deposition process occurs when in-flight powder particles partially block the laser beam, preventing it from fully reaching the melt pool. This blockage alters the beam's profile, introducing spatio-temporal randomness in heat transfer to the melt pool and affecting its stability. This study utilizes a novel high-fidelity multiphysics model to quantitatively analyze gas-powder stream dynamics and laser-particle interactions. It specifically focuses on dynamic variations in laser beam shadowing, attenuation, and reflection of the laser beam radiant energy, along with powder particles temperature prediction from in-flight heating, accounting for multiple reflection phenomena. Gas-particle dynamics is modeled using a fully coupled CFD-DEM approach, while laser-particle in-flight interactions are predicted using a ray-tracing-based photon discretization method. Modeling predicted that interactions between the laser beam and the in-flight powder stream could result in energy losses up to approximately 70 % due to shadowing and attenuation. The study comprehensively explored the spatio-temporal variations in the attenuated laser beam profile, revealing significant deviations from its initial Gaussian profile and substantial stochasticity and randomness over time. To confirm the modeling results and correlate computational predictions with experimental data, high-speed visible imaging of the powder stream, both with and without the melt pool, along with laser beam attenuation measurements using a photodiode system, were conducted. The model's predictions of particle velocity and laser beam attenuation characteristics aligned with the results from these experiments. Modeling and high-speed imaging demonstrated that in-flight heating caused some particles to melt and few others to reach the vaporization threshold. High-speed imaging further validated these numerical findings by examining the interaction of heated particles with the melt pool across different phases (solid, liquid, and partially vaporized). A significant observation was the increased velocities of partially vaporized particles due to recoil pressure from selective vaporization, which led to the formation of deep craters in the melt pool resulting from high-speed impact.

The regenerative solar system. Unified theory of physics

The Euler’s holomorphic regenerative universe is a quantum-gravitational theory of Earth development recognizing that oxygen, hydrogen, nitrogen and carbon dioxide in the Earth’s hydrosphere engender biological processes along with living organisms able to reshape the planet as surely as any physical force, but with delayed effects, the so-called torsional/gravitational buckling lag. Herein, the environmental sciences as a Vernadsky’s hypothesis precursor to these, become vital for preserving biological recurrent cycles, their nature being artificially changed by a vicious human intervention. The present paper describes the thermal gravitational mechanism of a solar system associated with the regenerative processes of molecular structures (in biology called metabolism or growth) at the quantum-gravitational scale, too slow to be perceived. The term “morph” (or the concept of “morphing” in aeronautics, in mathematics called topological holomorphism) originates from ancient Greeks and refers to the shape, figure, or other related aspects of an evolving entity. Therefore, morphing/morphism pertains to the process of modifying the original form or appearance of a particular object or system. The planets of solar system like “cosmic organisms” can manipulate the curvature and twist of their surfaces to maintain precise control over their recurrent cyclical complex motions (double, orbital and sideral rotations) by the thermal gravitational waves. The out of order function of the thermal gravitational mechanism can lead to the global warming effects associated with both reshaping (earthquakes, fires, floods) surfaces and morphing (as a whole energy metabolism) mutations, crucial for perpetuity of human beings. At the same time, the concept of quantum-gravity light with a topological dual isomorphic structure solves the fundamental problem of a unified theory of physical forces, as kinematic fast dynamo electromagnetic forces for splitting quanta bonded into atomic structures, and persistent (long time) gravitational forces for non-splitting quanta bonded into thermomolecular morphing structures. The only problem remains to gauge such multiple cooperative physical phenomena induced by light, which is solved by diverse reciprocity/equivalence theorems and corresponding conversion factors.

Reconstructing episodic and multi-vent, rhyolitic eruptions: The ∼ 1314 CE Kaharoa eruption of the Tarawera Dome Complex, Okataina Caldera (New Zealand)

Detailed stratigraphic reconstructions and quantitative deposit characterisations of moderate to large-scale rhyolitic eruptions are limited. This hinders our ability to model the multiple eruptive phenomena and hazards associated with rhyolitic volcanism. To gain new perspectives on the patterns and behaviours of rhyolitic eruptions, we present a study on the explosive phases of the 1314 ± 12 CE Kaharoa eruption of Tarawera, New Zealand. The eruption occurred from multiple aligned vents within the Okataina Caldera and is the youngest rhyolitic eruption of the frequently active Taupō Volcanic Zone. We systematically quantify the deposit characteristics of the Kaharoa pyroclastic succession to provide new insights into the type of eruption sequence and eruptive style changes. Based on field evidence, stratigraphic correlations, grain size and componentry analyses, we subdivide the Kaharoa deposit into 24 units and identify 7 main deposit types, which are linked to different eruptive and depositional processes. The explosive activity was discontinuous, characterised by repeated discrete episodes of sustained magma discharge separated by short time breaks. The activity consisted mainly of repeated subplinian-type columns that gave way to fallout deposition and emplacement of numerous lapilli beds. This activity transitioned to a pyroclastic density current (PDC) dominated phase in response to lateral vent migration. Ash emission activity occurred within and towards the end of the explosive sequence, indicating declines in the eruptive intensity. Six main intra-eruption phases (A to F) of dominant eruptive styles are established to describe the temporal evolution of the eruption. Phases A, B and D are associated with the repeated subplinian-type activity. Phase C comprises the major PDC activity, while the final two Phases E and F are associated with ash emission during initiation of lava dome extrusion and to the final dome-building sequence. This study highlights the complex nature of episodic, multi-phase, and multi-vent, explosive to dome-forming rhyolitic eruptions, depicting a scenario of great relevance for future volcanic hazard studies at active rhyolitic volcanoes worldwide.

Effect of multi wall carbon nanotubes during semi-solid to solid phase transformation in eutectic Al-Si alloy

The study explores numerically the combined effect of the base metal pouring temperature and MWCNT (multi wall carbon nanotubes) during semi-solid to solid solidification of Al-Si-MWCNT composite material. The semi-solid to solid solidification actually differs significantly both qualitatively and quantitatively from the liquid to solid solidification. During solidification of Al-Si-MWCNT composite material, the melt temperature and the cooling rate play crucial roles in the phase transformations. During liquid to solid solidification, the MWCNT significantly affects the cooling rate, leading to multiple recalescence phenomena, and influences the formation and evolution of the columnar and globular grains. Under the same condition, the MWCNT also impacts the silicon segregation, causing fluctuations in the silicon phases and its redistribution. However, during the semi-solid to solid solidification, it is observed that by decreasing the melt temperature into a semi-solid state, the segregation rate of silicon decreases which enhances more homogeneous CNT distribution. It also increases the globular volume fraction and dominates the columnar growth. Overall, the future trend of semi-solid to solid solidification of Al-Si-MWCNT composite materials lies in optimizing their properties for specific applications, expanding their use across diverse industries, and promoting sustainable manufacturing practices.

The Banality as a Mood of Contemporary Society in Contrast to the Artist's Mood

Contemporary times witness significant transformations in economic organisation, deeply influencing social dynamics and emotional frameworks. This study aimed to elucidate banality as the prevailing mood of contemporary society, delineating two perspectives through art: one defined by a banal emotional framework and the other advocating innocence. Inspired by Heidegger and Nietzsche, an inquiry unfolded to reveal the emotional and affective aspects of the examined phenomenon, enriched by perspectives from acclaimed artists. Consequently, the findings established banality affective disposition characteristics as a hallmark of contemporary comprehensiveness, encompassing instrumental engagement with the world, acceptance, and incapacity to perceive its banal condition. In contrast, the banality of the broader world was juxtaposed with that of the artist, who focused on innocence as a manifestation of their being in the world. The outlined approach derived, in methodological terms, from a phenomenological-hermeneutic procedure anchored in the Heideggerian framework, which analysed the "mood" (Stimmung) as a determinant in the interpretation and unfolding of the world. The findings proposed alternative understandings of contemporary life as the result of the conquest of the banality of average mood and contrast it with the character of the artist who resists falling into the overarching banality of our time. The results reflected the difficulty of the current era, from which hopeful aspects of transformation are not evident. Conversely, resistance is concentrated in isolated occurrences that reclaim life and its evolution. This work sought to establish new avenues of research that enable the exploration of multiple contemporary phenomena, in addition to indicating paths of inquiry that link the thoughts of artists and their expressions.

Improving the output performance of magnetic energy harvesters through coupling beam

We propose a novel magnetic energy harvester (MEH) with multiple resonance modes. The MEH consists of low-frequency and high-frequency piezoelectric cantilevers connected by a coupling beam. Theoretical modeling, simulation, and experiments were conducted to validate the multiple resonance phenomenon. The results from these investigations are consistent with each other. It is evident that the internal coupling (IC) effect resulting from the coupling beam facilitates significant voltage outputs from both cantilevers at their respective resonant frequencies, i.e. the low-frequency beam (LFB) resonates at the resonant frequency of the high-frequency beam (HFB), resulting in a remarkable 122% increase in the output voltage. Conversely, the HFB resonates at the resonant frequency of the LFB, leading to an astounding 1200% increase in the output voltage. As a result of the IC phenomenon, the operating frequency bandwidth for harvesting an output voltage of more than 1 V in the LFB has been extended by 35.3%, while that of the HFB for capturing an output voltage of more than 0.5 V has been extended by 62.5%. Additionally, the coupling effect significantly enhances the power output of the MEH.