Phased Array Feed Research Articles

Digital Beamforming Demonstration of a Microstrip Antenna Phased Array Feeds (PAF) at 1.25 GHz

We introduce the structure of a radio astronomy phased array feeds (PAF) beamforming demonstrator. In a laboratory environment, we have demonstrated beamforming on a received 1.25 GHz sinusoidal signal and used digital weighting techniques to plot the 2D pattern of the PAF. The radio frequency part of the demonstrator includes a 4 × 4 linearly polarized microstrip antenna array, all of which is connected in series with a low-noise amplifier. The signals from the central 4 × 2 array elements are injected into a radio frequency system-on-chip digital board, which can receive eight inputs with a bandwidth of 512 MHz. Combining the principle of undersampling, the beamforming is completed at a frequency of 1.25 GHz for the offline data, and a 2D image of the beam is plotted using beam scanning technology.

Design of Broadband Phased Array Feed Using Stereolithographic Additive Manufacturing Heterogeneous Integrating Technology for Fast Radio Burst Observation

Herein, a stereolithography appearance 3‐D printed phased array feed (PAF) on radio telescopes based on broadband Vivaldi antenna elements covering 4–10 GHz, which meets the requirements of low cost, lightweight, and compact volume, is designed and proposed. The prototype is integrated with two orthogonal linear polarized 4 × 5 arrays, each of which is composed of 20 Vivaldi antenna elements. The distance between adjacent antenna elements is 1/2 λ in both E‐plane and H‐plane. By increasing thickness of the slice elements compared with traditional end‐fire arrays on printed circuit board, the wide‐band impedance matching is realized. The mutual impedance matrix of the dual‐polarization array is calculated and the equivalent circuit of the active and parasitic elements is demonstrated. Due to the orthogonal parasitic elements inserted between the adjacent active antennas, equivalent capacitance is introduced in the tightly coupled array. The measured active voltage standing wave ratio of the manufactured PAF exhibits 4–10 GHz operating bandwidth for both broadside radiation and 45° scan in both E‐ and H‐plane polarization. The proposed wideband PAF has a promising potential application prospect in fast radio burst and other astronomic observation.

Numerical model of the QiTai radio Telescope PAF receiver signal and simulation of interference mitigation

Xinjiang Qitai is constructing a 110-m fully steerable radio telescope (QiTai radio Telescope [QTT]) equipped with a phased array feeds (PAF) receiver, which will install the focal plane operating from 0.7 to 1.8 GHz. In this article, we introduce a PAF receiver model for beamforming, and the numerical model of the internal and external noise for this PAF receiver is provided using electromagnetic field simulation software. The linear constraint minimum variance (LCMV) algorithm is used to simulate the interference mitigation. The interference mitigation rate is from 0.581 to 0.921, and the signal restoration rate is from 0.998 to 1.512 within the error range of an interference arrival angle of 10°. This conclusion can be used in the signal correction of the PAF receiver for interference mitigation.

First Extragalactic Detection of Thermal Hydroxyl (OH) 18 cm Emission in M31 Reveals Abundant CO-faint Molecular Gas

The most abundant interstellar molecule, molecular hydrogen (H2), is practically invisible in cold molecular clouds. Astronomers typically use carbon monoxide (CO) to trace the bulk distribution and mass of H2 in our galaxy and many others. CO observations alone fail to trace a significant component of molecular gas known as “CO-dark” molecular gas, which can be probed with molecules such as OH and CH. We present an extremely sensitive pilot search for the 18 cm hydroxyl (OH) lines in the Andromeda galaxy (M31) with the 100 m Robert C. Byrd Green Bank Telescope. We successfully detected the 1665 and 1667 MHz OH lines in faint emission. The 1665/1667 MHz line ratio displays the characteristic 5:9 ratio predicted under conditions of local thermodynamic equilibrium. To our knowledge, this is the first detection of nonmaser 18 cm OH emission in another galaxy. We compare our OH and H i observations with archival CO (1–0) observations. Our OH detection position overlaps with the previously discovered Arp Outer Arm in CO. Our best estimates show that the amount of H2 traced by OH is 100%–140% higher than the amount traced by CO in this sight line. The amount of dark molecular gas implied by dust data supports this conclusion. We conclude that the 18 cm OH lines hold promise as a valuable tool for mapping of the “CO-dark” and “CO-faint” molecular gas phase in nearby galaxies, especially with upcoming multibeam, phased-array feed receivers on radio telescopes, which will allow for drastically improved mapping speeds of faint signals.

Reflector Deformation Measurement and Correction Methodology of Large Antenna Based on Phased Array Feed

To solve the problem of time-consuming measurement and correction of large antennas’ reflector deformation, a new microwave holography methodology based on a Phased Array Feed (PAF) is proposed. Starting from the known expression of receiving signals in microwave holography, the theory of PAF holography is derived through Geometrical Optics. Reflector deformation, as well as pointing deviation and subreflector offset, can be calculated out by applying the derived equations. A measurement and correction system based on PAF holography is depicted, and two kinds of measurement methods are illustrated. The proposed measurement methodology is verified by numerical simulation, and its measurement error is analyzed. The results indicate that our proposed methodology is feasible, especially for Cassegrain antennas.

Simulation of RFI Cancellation Using Subspace Projection Algorithm for PAF Receiver

The simulation of radio frequency interference (RFI) cancellation by applying a spatial filtering technique for phased array feed (PAF) is presented. In order to better reflect the characteristics of PAF, a new signal model is to add the coupling coefficient among elements of PAF to the conventional array signal model. Then the subspace projection (SP) algorithm is used to cancel RFI from the correlation matrix of the signal, and finally, the 2D power image is drawn. The power variation of signal-of-interest direction and RFI direction before and after using the SP algorithm is analyzed. The new signal model and simulation strategy can be used to test and verify the beamformer.

Performance analysis of the mutual coupling effect on Phased Array Feeds

Performance analysis of the mutual coupling effect on Phased Array Feeds

Discovery of Four Pulsars in a Pilot Survey at Intermediate Galactic Latitudes with FAST

We present the discovery and timing results of four pulsars discovered in a pilot survey at intermediate Galactic latitudes with the Five-hundred Aperture Spherical Telescope (FAST). Among these pulsars, two belong to the category of millisecond pulsars (MSPs) with spin periods of less than 20 ms. The other two fall under the classification of “mildly recycled” pulsars, with massive white dwarfs as companions. Remarkably, this small survey, covering an area of 4.7 deg2, led to the discovery of four recycled pulsars. Such success underscores the immense potential of future surveys at intermediate Galactic latitudes. In order to assess the potential yield of MSPs, we conducted population simulations and found that both FAST and Parkes new phased array feed surveys, focusing on intermediate Galactic latitudes, have the capacity to uncover several hundred new MSPs.

Phased Array Feed Experiments and Galactic H i Observations

The Phased Array Feed (PAF) is considered as one of the next generation receivers for radio telescopes, which can significantly enlarge the instantaneous Field-of-View of large aperture single dish radio telescopes and enable more flexible observing configurations. Study efforts on PAF development for radio telescopes have been made for more than two decades and have become more and more applicable. We report the development of an ambient-temperature 19 element L-band PAF system and the experimental results including its far field beam pattern and system temperature measurement, which achieve the expectations. Implementing the aperture array beam-forming method, we demonstrate a wide-field Galactic H i observations in the radio camera mode. The results indicate that this system might be applicable for strong Galactic transient detections. This system could be directly equipped to large telescopes like the Five-hundred-meter Aperture Spherical radio Telescope (FAST) and FAST array in the future.

Preliminary Simulation and Manufacture of a 40-element PAF Prototype for FAST

This paper presents the preliminary simulation results of the prototype 40-element phased array feed (PAF) array for the Five-hundred-meter Aperture Spherical radio Telescope (FAST) and the measurement of a manufactured single Vivaldi element. The simulation results include the characteristic of a standalone Vivaldi element. The full-wave simulation of the explicit PAF array is carried out, from which the performance of the embedded elements and the mutual coupling among the elements could be accurately inferred. The performance of the combination of the PAF and the main reflector of FAST is calculated. The results imply that the PAF combined with the FAST antenna could operate over a much wider bandwidth from 650 to 1450 MHz compared with the standalone element. The antenna temperature remains almost the same for zenith angles from 0 to 40°. From the simulation results, the PAF shows good potential to improve the performance of FAST. A measurement of a manufactured Vivaldi element is also presented.

L Band Phased Array Feed Noise Figure and Radiation Efficiency Measurement with the Antenna Y Factor Method

The noise performance of a high sensitivity, wide-field astronomical phased array feed receiver can be characterized by measurements using the antenna Y factor method. These measurements are used to determine figures of merit for an active array receiver. Antenna elements for the Advanced L Band Phased Array Camera for Astronomy (ALPACA) were measured using the antenna Y factor method to determine the active array and receiver noise figure, the antenna loss, receiver equivalent noise temperature, and radiation efficiency of the system over its 500[Formula: see text]MHz operating bandwidth. The completed ALPACA instrument will feature a fully cryogenic design with both the low-noise amplifiers and array elements cryogenically cooled. The uncooled performance measurements from the antenna Y factor method are used to extrapolate the elements cryogenic radiation efficiency and antenna loss showing that it is expected that the elements will contribute less than 1 K to the overall system noise temperature. These results validate the antenna Y factor method to measure key antenna parameters such as the antenna radiation efficiency and show that the instruments front-end array and electronics meets expected performance targets.

An S-band cryogenic phased array feed for radio astronomy

Abstract We describe the design and ground testing of a prototype S-band cryogenic phased array feed. The feed uses 6-mm thick solid aluminium Vivaldi antennas, which were designed using a commercial electromagnetic simulation software. The antennas are designed for easy removal and 40 of them have been integrated into an array. The return loss, inter-element coupling, and beam patterns have been tested at room temperature and found to agree with simulations. For cryogenic testing the array has been combined with an existing analogue receiver chain and integrated into an cryostat. When tested at 30 K in aperture array mode the system was found to possess a minimum receiver temperature of 12 K. Increasing the number of elements and combining the array with a beam former would make it a suitable phased array feed for radio-astronomy applications.

Focal-Plane Arrays With Improved Scan Capabilities

This article investigates the limits of focal-plane array (FPA) technology by studying a double-reflector antenna system with wide-angle scan capabilities. The proposed reflector configurations are analyzed in terms of effective isotropic radiated power (EIRP) maximization, minimization of the required total number of array elements for a wide-scan range, and the highest number of simultaneously active array elements of the phased-array feed. Presented configurations have capabilities to operate in the scan range up to ± 30° in azimuth (±35 beamwidths scan) and ± 3° in elevation. It has been demonstrated how different optimizations could allow to build systems with varying performance in terms of the key operation parameters, such as array size, EIRP, and the number of active array elements. A detailed analysis is provided that demonstrates the potential applicability of this concept in future millimeter-wave (mm-wave) applications.

Characterising the Apertif primary beam response

Context. Phased array feeds (PAFs) are multi-element receivers in the focal plane of a telescope that make it possible to simultaneously form multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently, the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers to carry out several observing programs, including two imaging surveys and a time-domain survey. The Apertif imaging surveys use a configuration of 40 partially overlapping compound beams (CBs) simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This work is aimed at characterising the response of the 40 Apertif CBs to create frequency-resolved I, XX, and YY polarization empirical beam shapes. The measured CB maps can be used for the image deconvolution, primary beam correction, and mosaicking processes of Apertif imaging data. Methods. We used drift scan measurements to measure the response of each of the 40 Apertif CBs. We derived beam maps for all individual beams in I, XX, and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sampled the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derived beam maps for each individual WSRT dish. Results. We present the frequency and time dependence of the beam shapes and sizes. We compared the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.

First release of Apertif imaging survey data

Context. Apertif is a phased-array feed system for the Westerbork Synthesis Radio Telescope, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program utilizing this upgrade started on 1 July 2019, with the last observations taken on 28 February 2022. The imaging survey component provides radio continuum, polarization, and spectral line data. Aims. Public release of data is critical for maximizing the legacy of a survey. Toward that end, we describe the release of data products from the first year of survey operations, through 30 June 2020. In particular, we focus on defining quality control metrics for the processed data products. Methods. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products and provide flags indicating the quality of those data products. Results. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams (of 7640 considered) are released. The median noise in the continuum images is 41.4 uJy beam−1, with a slightly lower median noise of 36.9 uJy beam−1 in the Stokes V polarization image. The median angular resolution is 11.6″/sin δ. The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy beam−1, corresponding to a 3-σ H i column density sensitivity of 1.8 × 1020 atoms cm−2 over 20 km s−1 (for a median angular resolution of 24″ × 15″). Line cubes at lower frequency have slightly higher noise values, consistent with the global RFI environment and overall Apertif system performance. We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface and can be queried using a variety of standard tools.

The Apertif science verification campaign

Context. The characteristics of the polarised radio sky are a key ingredient in constraining evolutionary models of magnetic fields in the Universe and their role in feedback processes. The origin of the polarised emission and the characteristics of the intergalactic medium on the line of sight can be investigated using large samples of polarised sources. Ancillary infrared (IR) and optical data can be used to study the nature of the emitting objects. Aims. We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. Methods. We use automatic routines to generate full field-of-view Q- and U-cubes and perform rotation measure (RM)-Synthesis, source finding, and cross-matching with published radio, optical, and IR data to generate polarised source catalogues. All sources were inspected individually by eye for verification of their IR and optical counterparts. Spectral energy distribution (SED)-fitting routines were used to determine photometric redshifts, star-formation rates, and galaxy masses. IR colour information was used to classify sources as active galactic nuclei (AGN) or star-forming-dominated and early- or late-type. Results. We surveyed an area of 56 deg2 and detected 1357 polarised source components in 1170 sources. The fraction of polarised sources is 10.57% with a median fractional polarisation of 4.70 ± 0.14%. We confirmed the reliability of the Apertif measurements by comparing them with polarised cross-identified NVSS sources. Average RMs of the individual fields lie within the error of the best Milky Way foreground measurements. All of our polarised sources were found to be dominated by AGN activity in the radio regime with most of them being radio-loud (79%) and of the Fanaroff-Riley (FR)II class (87%). The host galaxies of our polarised source sample are dominated by intermediate disc and star-forming disc galaxies. The contribution of star formation to the radio emission is on the order of a few percent for ≈10% of the polarised sources while for ≈90% it is completely dominated by the AGN. We do not see any change in fractional polarisation for different star-formation rates of the AGN host galaxies. Conclusions. The Apertif system is suitable for large-area high-sensitivity polarised sky surveys. The data products of the polarisation analysis pipeline can be used to investigate the Milky Way magnetic field on projected scales of several arcminutes as well as the origin of the polarised emission in AGN and the properties of their host galaxies.

Design of RFSoC-based Digital Phased Array Feed (PAF) and Hybrid Architecture Beamforming System

As the number of array elements and bandwidth increase, the design challenges of the Phased Array Feed (PAF) front-end and its signal processing system increase. Aiming at the ng-PAF of the 110 m radio telescope, this article introduces the concept of fully digital receivers and attempts to use Radio Frequency System-on-Chip (RFSoC) technology to digitize close to the feed array, reduce the complexity and analog components of the front-end, and improve the fidelity of the signals. The article discusses the digital beamforming topology and designs a PAF signal processing experimental system based on RFSoC+GPU hybrid architecture. The system adopts a ZCU111 board to design RF-direct digitization and preprocessing front-end, which can sample eight signals up to 2.048 GSPS, 12 bit, channelize the signals into 1024 chunks, then reorder into four data streams and select one of the 256 MHz frequency bands to output through four 10 Gb links. A GPU server is equipped with four RTX 3090 GPUs running four HRBF_HASHPIPE instances, each receiving a 64 MHz bandwidth signal for high-throughput real-time beamforming. The experimental system uses a signal generator to emulate Sa-like signals and propagates through rod antennas, which verifies the effectiveness of the beamforming algorithm. Performance tests show that after algorithm optimization, the average processing time for a given 4 ms data is less than 3 ms in the four-GPU parallel processing mode. The RFSoC integrated design shows significant advantages in power consumption and electromagnetic radiation compared with discrete circuits according to the measurement results.

Comparative analysis of numerical methods to calculate electric field distribution from the initial plane to a plane non-parallel to the initial one

The paper presents a brief overview of the numerical methods for continuation of electric field amplitude/phase distribution from the near-field scanning plane to a plane non-parallel to the initial plane in a general case. The methods are considered based on their feasibility for finding an optimal arrangement of the phased-array antenna feed.

Apertif: Phased array feeds for the Westerbork Synthesis Radio Telescope

We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope that transforms this telescope into a high-sensitivity, wide-field-of-viewL-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams are formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2is being performed that will deliver both continuum and spectral line datasets, of which the first data have been publicly released. In addition, a time domain transient and pulsar survey covering 15 000 deg2is in progress. An overview of the Apertif science drivers, hardware, and software of the upgraded telescope is presented, along with its key performance characteristics.

Apercal—The Apertif calibration pipeline

Apertif (APERture Tile In Focus) is one of the Square Kilometre Array (SKA) pathfinder facilities. The Apertif project is an upgrade to the 50-year-old Westerbork Synthesis Radio Telescope (WSRT) using phased-array feed technology. The new receivers create 40 individual beams on the sky, achieving an instantaneous sky coverage of 6.5 square degrees. The primary goal of the Apertif Imaging Survey is to perform a wide survey of 3500 square degrees (AWES) and a medium deep survey of 350 square degrees (AMES) of neutral atomic hydrogen (up to a redshift of 0.26), radio continuum emission and polarisation. Each survey pointing yields 4.6 TB of correlated data. The goal of Apercal is to process this data and fully automatically generate science ready data products for the astronomical community while keeping up with the survey observations. We make use of common astronomical software packages in combination with Python based routines and parallelisation. We use an object oriented module-based approach to ensure easy adaptation of the pipeline. A Jupyter notebook based framework allows user interaction and execution of individual modules as well as a full automatic processing of a complete survey observation. If nothing interrupts processing, we are able to reduce a single pointing survey observation on our five node cluster with 24 physical cores and 256 GB of memory each within 24h keeping up with the speed of the surveys. The quality of the generated images is sufficient for scientific usage for 44 % of the recorded data products with single images reaching dynamic ranges of several thousands. Future improvements will increase this percentage to over 80 %. Our design allowed development of the pipeline in parallel to the commissioning of the Apertif system.