Phase Shift Keying Modulation Research Articles

Hybrid selection combining scheme for correlated cooperative communication over [formula omitted]-[formula omitted] fading channels

Due to poor (limited) scattering, a correlation among channels is inevitable, resulting in performance degradation of wireless communication systems. In this paper, we propose a hybrid selection combining (SC), also known as switched scaled – SC for correlated cooperative communication over κ-μ fading channel. By using paired error analysis, we derive the end-to-end symbol error probability of this system over bivariate κ-μ channel fading with M-ary phase shift keying (MPSK) modulation. In addition, we obtain significant parameters of hybrid SS-SC, such as the optimum scaling factor and optimum threshold by using the second derivative test. For every signal to noise ratio (SNR), we obtain different optimum thresholds and scaling factors. Our analytical results were found to overlap significantly with those of the simulation results. They were also compared with the variants of SC and switched diversity techniques. Our study demonstrates that the proposed hybrid technique performs better than the other SC and switched diversity schemes over correlated and uncorrelated fading channels. Furthermore, we derive an asymptotic symbol error probability for the proposed system, and the asymptotic results are in agreement with the analytical results at higher SNRs. Our study also shows that the diversity order of the system depends on the mutually exclusive events of the proposed technique.

Design and Test of Offset Quadrature Phase-Shift Keying Modulator with GF180MCU Open Source Process Design Kit

This article explores the evolution of integrated circuits (ICs), highlighting the fundamental role of open source Electronic Design Automation (EDA) tools in their development. It describes the IC’s design flow, differentiating between Front-end and Back-end design stages, and details the process of implementing the digital stage in offset quadrature phase-shift keying (OQPSK) modulation in an IC, including its hardware description language (HDL), the implementation test in the field-programmable gate array (FPGA), and the physical layout using the first manufactured open source process design kits (PDKs) in Global Foundries’ 180 nm, as well as the use of OpenLane and Caravel. To conclude, the results of the physical tests obtained from the digital modulation are presented, as well as the performance of the raised cosine shaping filter.

Scaled Selection Combining Receiver for Cooperative NOMA-based 5G Cellular Systems

Non-Orthogonal Multiple Access (NOMA) technology can accommodate more subscribers concurrently and achieve higher spectrum efficiency than Orthogonal Multiple Access (OMA) technologies. This work investigates the performance of the two subscriber downlink cooperative NOMA system with Scaled Selection Combining (SSC) comprising a Base Station (BS), a cell edge subscriber and a near subscriber. Due to the channel conditions, the error performance of the cell edge subscriber is poorer compared to the near subscriber. To mitigate this and enhance the performance, the proposed SSC combines signals from BS and near subscriber and chooses the best signal between them. The Symbol Error Probability (SEP) of this cellular system with M−ary Phase Shift Keying (MPSK) modulation is derived under the Rayleigh fading environment. The optimum scaling factor to reduce the SEP is also obtained. The theoretical SEP expressions of SSC are validated with the Monte-Carlo simulations. The proposed system provides better SEP and outperforms the non-cooperation and traditional Selection Combining (SC) schemes. Additionally, the efficacy of the proposed system under various modulation schemes is studied.

Investigation of Costas loop phase deviation effect on BER performance of space downlink coherent communication system with DPSK scheme

The Costas loop is an important technology for synchronous demodulation in space coherent communication. However, due to the limitation of the loop device and processing technology, it is difficult to achieve high-precision locking, which results in the Costas loop phase deviation and further affects the quality of the demodulation signal. In this paper, a closed-form bit error rate (BER) model is derived to evaluate the Costas loop phase deviation effect on BER performance in the space differential phase shift keying (DPSK) modulation and heterodyne detection communication system, considering laser phase noise, atmospheric turbulence, and detector noise. Based on the BER model, analytical solution simulation is conducted. The results show that the BER performance deteriorates varying with the increase of the Costas loop phase deviation. In addition, we research how to better balance the laser linewidth and Costas loop accuracy in the system design to ensure good communication status. We find that the wider the laser linewidth, the more stringent the Costas loop accuracy. Furthermore, the BER performance versus the Costas loop phase deviation under different satellite-to-ground communication system parameter settings including divergence angle, receiving aperture, signal laser power, and data rate are analyzed. This work provides valuable references for space optical coherent communication systems design.

A 1-bit DACs precoding for MU-MIMO based on binary equilibrium constraint: An alternating direction method

High power consumption is one of the main problems in the practical application of massive multi-user multi-input-multi-output (MU-MIMO) systems, and using 1-bit digital-to-analog converters (DACs) instead of high-resolution DACs is an effective way to reduce the power consumption of massive MU-MIMO systems. How to design efficient precoding schemes to improve the performance of 1-bit MU-MIMO systems has become a hot research field. This paper mainly studies the precoding problem of 1-bit DACs based on minimum mean squared error (MMSE). We first transform the non-convex constraints of the traditional optimization problem using binary equilibrium constraints. Then, to solve the transformed objective problem, we establish a framework based on the alternating direction method (ADM), use the fast projection gradient (FPG) method, and propose an alternating maximum minimum (AMM) algorithm to solve the optimization variables alternately. We have verified the convergence of the proposed algorithm and analyzed the accuracy of the proposed ADM framework and the computational complexity of the proposed algorithm in detail. In the simulation section, we analyze the uncoded bit error rate (BER) performance of the proposed algorithm in phase-shift keying (PSK) modulation and quadrature amplitude modulation (QAM) modes. The simulation results show that compared with existing advanced algorithms, the proposed algorithm can achieve performance advantages of about 1 dB and 2 dB in QPSK modulation mode and 16QAM modulation mode, respectively.

Implementation of Underwater Electric Field Communication Based on Direct Sequence Spread Spectrum (DSSS) and Binary Phase Shift Keying (BPSK) Modulation.

Stable communication technologies in complex waters are a prerequisite for underwater operations. Underwater acoustic communication is susceptible to multipath interference, while underwater optical communication is susceptible to environmental impact. The underwater electric field communication established based on the weak electric fish perception mechanism is not susceptible to environmental interference, and the communication is stable. It is a new type of underwater communication technology. To address issues like short communication distances and high bit error rates in existing underwater electric field communication systems, this study focuses on underwater electric field communication systems based on direct sequence spread spectrum (DSSS) and binary phase shift keying (BPSK) modulation techniques. To verify the feasibility of the established spread spectrum electric field communication system, static communication experiments were carried out in a swimming pool using the DSSS-based system. The experimental results show that in fresh water with a conductivity of 739 μS/cm, the system can achieve underwater current electric field communication within a 11.2 m range with 10-6 bit errors. This paper validates the feasibility of DSSS BPSK in short-range underwater communication, and compact communication devices are expected to be deployed on underwater robots for underwater operations.

Adaptive simulation of digital signal transmission

High-order modulated signals have lower anti-interference ability than low-order modulated signals with the same modulation method and conditions. In situations with low signal-to-noise ratios, the quality of high-order signals can degrade significantly. An algorithm capable of intelligently switching the modulation order based on the current signal-to-noise ratio can effectively address this issue. This paper presents an adaptive signal transmission algorithm that intelligently selects different orders of Phase shift keying (PSK) modulation depending on varying signal noise ratio (SNR) conditions, while ensuring the user-specified upper limit of bit error rate (BER). This approach guarantees signal transmission quality. The algorithm is implemented in Python and involves simulating the relationship curve between SNR and BER for different PSK orders. This simulation is combined with theoretical transmission rate analysis, resulting in an adaptive algorithm that intelligently switches modulation methods under complex conditions to meet transmission requirements. The proposed algorithm dynamically adapts to diverse user requirements for signal-to-noise ratios in various environments. It achieves this by adjusting the modulation order, calculating theoretical transmission times based on the given signal frequency, and ultimately verifying the actual bit error rate through transmission and testing. Upon testing, this design successfully achieved its intended goals.

Performance analytics of adaptive subcarrier intensity modulated free-space optical communications over general Málaga turbulence links

In this paper, we study the performance analysis of free-space optical (FSO) system employing a constant-power variable-rate adaptive subcarrier intensity modulation (SIM) and utilizing phase-shift keying (PSK) over the Málaga atmospheric turbulence with pointing errors. According to a target bit-error rate (BER) and the instantaneous signal-to-noise ratio (SNR), the adaptive strategy adopts the subcarrier PSK modulation order. More precisely, we develop new analytical expressions for the average BER, the upper bound on ergodic channel capacity for non-adaptive modulation, and the attainable spectral efficiency (SE) of an adaptive SIM-FSO communication system. According to the simulation results, it is possible to achieve an increase in SE under weak-to-strong turbulence conditions without the need to increase the average optical power transmitted or compromise the BER requirements.

Energy Consumption Analysis for Continuous Phase Modulation in Smart-Grid Internet of Things of beyond 5G.

Wireless sensor network (WSN) underpinning the smart-grid Internet of Things (SG-IoT) has been a popular research topic in recent years due to its great potential for enabling a wide range of important applications. However, the energy consumption (EC) characteristic of sensor nodes is a key factor that affects the operational performance (e.g., lifetime of sensors) and the total cost of ownership of WSNs. In this paper, to find the modulation techniques suitable for WSNs, we investigate the EC characteristic of continuous phase modulation (CPM), which is an attractive modulation scheme candidate for WSNs because of its constant envelope property. We first develop an EC model for the sensor nodes of WSNs by considering the circuits and a typical communication protocol that relies on automatic repeat request (ARQ)-based retransmissions to ensure successful data delivery. Then, we use this model to analyze the EC characteristic of CPM under various configurations of modulation parameters. Furthermore, we compare the EC characteristic of CPM with that of other representative modulation schemes, such as offset quadrature phase-shift keying (OQPSK) and quadrature amplitude modulation (QAM), which are commonly used in communication protocols of WSNs. Our analysis and simulation results provide insights into the EC characteristics of multiple modulation schemes in the context of WSNs; thus, they are beneficial for designing energy-efficient SG-IoT in the beyond-5G (B5G) and the 6G era.

Reconfigurable all-optical pattern recognition for PSK and QAM signals in high-speed optoelectronic firewalls.

In the fifth generation fixed networks (F5G) era, full-fiber-connected optical networks support emerging bandwidth-hungry services. However, optical networks are vulnerable to attack by tapping or other methods, which has been paid more and more attention in modern optical infrastructure. Therefore, high-speed optoelectronic firewalls appear as one of the promising technologies to guarantee security. The most significant and challenging component of a high-speed optoelectronic firewall is all-optical pattern recognition, especially for more advanced high-order modulation formats such as phase shift keying (PSK) or quadrature amplitude modulation (QAM) to satisfy efficient enhanced fixed broadband in F5G. In this paper, what we believe to be a novel reconfigurable all-optical pattern recognition system for PSK and QAM signals is proposed with two implementation architectures. The proposed system mainly consists of a generalized XNOR (GXNOR) and a recirculating loop. The two implementation architectures are precisely two realization methods of the GXNOR part. One employs two cascaded IQ Mach-Zehnder modulators and the other is implemented by the four-wave mixing. The numerical simulation results demonstrate that the two implementation architectures can both achieve all-optical pattern recognition for the reconfigurable high-order modulation formats of QPSK, 8PSK, and 16QAM with the recorded baud rate of 260GBaud.

Deep Learning-Based SC-FDMA Channel Equalization

It is very challenging to design an effective wireless communication system. That’s because of numerous factors affecting the performance of a typical wireless communication system, such as nonlinear channel distortions and impairments. single carrier frequency division multiple access (SC-FDMA) is a multiple access scheme that is an important part of the long-term evolution (LTE) standard for uplink transmission. An advanced mobile radio system’s multiple access schemes should indeed meet stringent requirements, such as a low bit error rate (BER). In this article, we investigate the equalization problem for nonlinear channel distortions and impairments using deep neural networks (NN). We introduce a novel combined deep neural network channel equalization and symbol detection scheme based on a deep learning (DL) recurrent feedback (RF) long short-term memory (LSTM) neural network to achieve blind equalization and decoding for SC-FDMA systems without knowing the channel state information (CSI). To train the model efficiently, the training data is gathered by simulation, with channel effects and noise treated as a complete black box. CSI and constellation demapping are learned by a deep neural network (DNN) model. Then, the frequency-domain sequences that have been corrupted are implicitly equalized to get the broadcasted signal back. Our specified SC-FDMA system, which uses a quadrature phase-shift keying (QPSK) modulation method and the suggested Deep Learning-based model channel equalizer, performs better than the existing equalizers by an average of 1 to 4 dB at moderate signal-to-noise (SNR) ratios, according to simulation data. A complexity comparison between the proposed and the conventional equalizers was conducted in terms of training time, execution time, and number of operations. On combined channel equalization and symbol detection, the suggested system delivers state-of-the-art performance.

A phase shift keying modulator integrated single‐feed circular polarization agile array antenna

AbstractThis paper proposes a novel design of a circular polarization agile array antenna using two phase shift keying (PSK) modulators. The proposed antenna includes four dual linear polarization microstrip patch antenna elements, two PSK modulators, two quarter‐wavelength slot transmission lines, microstrip‐slot line transitions, and a single feed network. The PSK modulator generates phase switching of either 180° or 0° of the vertical signals of each antenna element with the aid of the four diodes. The quarter‐wavelength slot transmission lines are added to adjust the 90° phase difference between orthogonal signals of the array antenna. By controlling the PSK modulators, the proposed antenna can achieve dual circular polarization switching capabilities. A prototype antenna is used to demonstrate the antenna concept. The measured results confirm the concept with a good agreement between the simulated and measured performances. The proposed antenna has no complex circuits for RF and DC signals, and it provides a compact structure.

Implementation of SIC Algorithms in the 5G DL

In this paper, we have implemented successive interference cancellation algorithms in the 5G downlink. We have calculated the maximum throughput in Frequency Division Duplex (FDD) mode in the downlink, where we have obtained a value equal to 836932 b/ms. The transmitter is of type Multiple Input Multiple Output (MIMO) with eight transmitting and receiving antennas. Each antenna among eight transmits simultaneously a data rate of 104616 b/ms that contains the binary messages of the three users. In this case, the cyclic redundancy check CRC is negligible, the Block error rate BLER is null, the MIMO category is the spatial diversity. The technology used for this is called Non-Orthogonal Multiple Access (NOMA) with a Quadrature Phase Shift Keying (QPSK) modulation. The transmission is done in a Rayleigh fading channel with the presence of obstacles. The MIMO Successive Interference Cancellation (SIC) receiver with two transmitting and receiving antennas recovers its binary message without errors for certain values of transmission power such as 50 dBm, with 0.054485% errors when the transmitted power is 20 dBm and with 0.00286763% errors for a transmitted power of 32 dBm(in the case of user 1) as well as with 0.0114705% errors when the transmitted power is 20 dBm also with 0.00286763% errors for a power of 24 dBm(in the case of user2) by applying the steps involved in SIC.

Coded Orthogonal Frequency Division Multiplexing System : An Overview

This article compares the performance of two modulation techniques—quadrature phase shift keying (QPSK) and M-ary quadrature amplitude modulation (M-QAM) with M=8, 16, 32, and 64—in a coded orthogonal frequency division multiplexing system. As an error-correcting code, convolutional technology is employed. A vehicular channel with additive white gaussian noise (AWGN) is utilized for communication. According to simulation data, for QPSK and M-QAM, a coded orthogonal frequency division multiplexing system performs better than an uncoded one. Additionally, the system performs better with QPSK than it does with M-QAM. Additionally, when M rises, the performance declines.

A 55 nm CMOS RF Transmitter Front-End with an Active Mixer and a Class-E Power Amplifier for 433 MHz ISM Band Applications

In order to meet the increasing demands of wireless communication for ISM bands, a 433 MHz transmitter RF front-end is designed using a 55 nm low-power CMOS technology. The circuits consist of an active mixer, a driver amplifier and a class-E power amplifier (PA). A double-balanced Gilbert active mixer is designed to realize binary phase-shift keying (BPSK) modulation. The driver is used to preamplify the modulated RF signals. The class-E PA adopts a parallel four-branch cascode structure to control the output power level. The load network of the PA is implemented through an off-chip circuit, in which a finite DC-feed inductance load network is selected to reduce the power loss. The mixer and driver are designed with a 1.2 V supply voltage, while the PA is operated at a 1.8 V supply voltage. The area of the chip is 0.206 mm × 0.089 mm, and the measured results show that it achieves a maximum output power of 2.7 dBm, with a total power consumption of 6.72 mW. At a drain efficiency (DE) of 34.5%, an S22 less than −10 dB over the frequency ranges from 393.79 MHz to 455.70 MHz can be measured for the PA. With 192 kbps BPSK data modulated at 433 MHz, the measured EVM is about 0.83% rms.

Smart Energy Borrowing and Relaying in Wireless-Powered Networks: A Deep Reinforcement Learning Approach

Wireless energy harvesting (EH) communication has long been considered a sustainable networking solution. However, it has been limited in efficiency, which has been a major obstacle. Recently, strategies such as energy relaying and borrowing have been explored to overcome these difficulties and provide long-range wireless sensor connectivity. In this article, we examine the reliability of a wireless-powered communication network by maximizing the net bit rate. To accomplish our goal, we focus on enhancing the performance of hybrid access points and information sources by optimizing their transmit power. Additionally, we aim to maximize the use of harvested energy, by using energy-harvesting relays for both information transmission and energy relaying. However, this optimization problem is complex, as it involves non-convex variables and requires combinatorial relay selection indicator optimization for decode and forward (DF) relaying. To simplify this problem, we utilize the Markov decision process and deep reinforcement learning framework based on the deep deterministic policy gradient algorithm. This approach enables us to tackle this non-tractable problem, which conventional convex optimization techniques would have difficulty solving in complex problem environments. The proposed algorithm significantly improved the end-to-end net bit rate of the smart energy borrowing and relaying EH system by 13.22%, 27.57%, and 14.12% compared to the benchmark algorithm based on borrowing energy with an adaptive reward for Quadrature Phase Shift Keying, 8-PSK, and 16-Quadrature amplitude modulation schemes, respectively.

Filter bank multi-carrier based offset ternary phase shift keying(FBMC/OTPSK)

Filter bank multi-carrier (FBMC) is a popular researched technique for wireless communications that offers several advantages over traditional orthogonal frequency-division multiplexing (OFDM) systems. In this paper, we propose a FBMC system using offset Triangle phase shift keying (TPSK) modulation (FBMC/OTPSK), analyze its bit error rate (BER) performance via additive white Gaussian noise (AWGN) channel, and compare it to that of conventional FBMC using offset quadrature amplitude modulation (FBMC/OQAM) system. Simulation results show that the proposed FBMC/OTPSK system considerably improves BER performance over FBMC/OQAM system. Additionally, we explore the impact of using ternary convolutional coding (TCC) with TPSK and binary convolutional coding (BCC) with QAM. The presented TPSK modulation encoded by TCC offers better error rate performance and minimum amplitude fluctuation compared to QAM encoded by BCC; therefore, TCC-coded OTPSK is proposed to be used with FBMC instead of BCC-coded OQAM to benefit from its lower error rates without bandwidth expansion, as well increase information carried by symbol, hence increases throughput.

All-Optical Modulation Format Conversions from PAM4 to QPSK and 16QAM Using Silicon-Rich Nitride Waveguides

Quadrature phase-shift keying (QPSK) and 16-quadrature amplitude modulation (16QAM) formats are deployed in inter-data center networks where high transmission capacity and spectral efficiency are required. However, in intra-data center networks, a four-level pulse amplitude modulation (PAM4) format is deployed to satisfy the requirements for a simple and low-cost transceiver configuration. For the seamless and effective connection of such heterogeneous networks without an optical-electrical-optical conversion, an all-optical modulation format conversion technique is required. In this paper, we propose all-optical PAM4 to QPSK and 16QAM modulation format conversions using silicon-rich nitride waveguides. The successful conversions from 50-Gbps-class PAM4 signals to 50-Gbps-class QPSK and 100-Gbps-class 16QAM signals are demonstrated via numerical simulations.

BER analysis of a full-duplex relay-assisted BPSK-SIM based VLC system for indoor applications.

This paper contemplates a relay-assisted visible light communication (VLC) system, where the light source (table lamp) acts as a relay node and cooperates with the main light source. Following the IEEE 802.15.7r1 VLC reference channel model, we assume that there are two different light sources present in an office room. The first one is the source terminal present on the ceiling and another one is the desk lamp that serves as the relay station, which works in a full-duplex method. Because of the loop interference channel, we model the VLC relay terminal using ray tracing simulations. We have analyzed the bit error rate (BER) performance of the relay-assisted VLC system using a binary phase shift keying-subcarrier intensity modulation (BPSK-SIM) technique. The proposed method outperforms existing phase shift keying (PSK) and square M-quadrature amplitude modulation (M-QAM) techniques. The proposed VLC system using the BPSK-SIM technique achieves a BER performance of 10-12 for an SNR of 20dB. The results of the proposed full-duplex and half-duplex relayed VLC systems are evaluated using equal power allocation (EPA) and optimum power allocation (OPA) techniques over three different modulation schemes, which are 2-PSK, square M-QAM, and BPSK-SIM.

Reconfigurable all-optical pattern-matching system for phase modulation formats based on phase-sensitive amplification in highly nonlinear fiber

All-optical pattern-matching system is to compare the input data with the target sequence to implement the data filtering directly in the optical layer. However, for current all-optical pattern-matching systems, one pattern-matching system can only match one modulation format, which limits its application. In this paper, a reconfigurable all-optical pattern-matching system for phase modulation formats is proposed. Taking advantage of phase-sensitive amplification (PSA) in highly nonlinear fiber (HNLF), the system can match various phase modulation formats through optical switches configured by a controller. We first evaluate the feasibility of the proposed system for binary phase-shift keying (BPSK) and quadrature phase-shift keying (QPSK) modulation formats with the transmission rates of 100 Gbaud and 200 Gbaud. The results show that our proposed system can correctly recognize and locate the position of the target sequence. Next, we analyze the extinction ratio (ER), contrast ratio (CR), Q factor, and bit error rate (BER) by changing the optical signal-to-noise ratio (OSNR) values of BPSK and QPSK signals to evaluate the noise performance. The proposed reconfigurable all-optical pattern-matching system provides an effective method to recognize signals with different phase modulation formats, which is suitable for future dynamically reconfigurable optical networks.