Phase-induced Amplitude Apodization Complex Mask Coronagraph Research Articles

Design and manufacturing of a multi-zone phase-shifting coronagraph mask for extremely large telescopes

Context. High-contrast imaging of exoplanets around nearby stars with future large-segmented apertures requires starlight suppression systems optimized for complex aperture geometries. Future extremely large telescopes (ELTs) equipped with high-contrast instruments operating as close as possible to the diffraction limit will open a bulk of targets in the habitable zone around M-stars. In this context, the phase-induced amplitude apodization complex mask coronagraph (PIAACMC) is a promising concept for high-efficiency coronagraphic imaging at small angular separations with segmented telescopes. Aims. The complex focal plane mask of the PIAACMC is a multi-zone, phase-shifting mask comprised of tiled hexagons that vary in depth. The mask requires micro-fabrication techniques because it is generally made of hundreds micron-scale hexagonal zones with depths ranging over a few microns. We aim to demonstrate that the complex focal plane mask of a PIAACMC with a small inner working angle can be designed and manufactured for segmented apertures. Methods. We report on the numerical design, specifications, manufacturing, and characterization of a PIAACMC complex focal plane mask for the segmented pupil experiment for exoplanet detection facility. Results. Our PIAACMC design offers an inner working angle of 1.3 λ/D and is optimized for a 30% telescope-central-obscuration ratio including six secondary support structures (ESO/ELT design). The fabricated reflective focal plane mask is made of 499 hexagons, and the characteristic size of the mask features is 25 μm, with depths ranging over ±0.4 μm. The mask sag local deviation is measured to an average error of 3 nm and standard deviation of 6 nm rms. The metrological analysis of the mask using interferential microscopy gives access to an in-depth understanding of the component’s optical quality, including a complete mapping of the zone depth distribution zone-depth distribution. The amplitude of the errors in the fabricated mask are within the wavefront control dynamic range. Conclusions. We demonstrate the feasibility of fabricating and characterizing high-quality PIAA complex focal plane masks.

Focal Plane Phase Masks for PIAA: Design and Manufacturing

The Phase Induced Amplitude Apodization Complex Mask Coronagraph (PIAACMC) is a coronagraph architecture for the direct detection of extrasolar planets, which can achieve close to the theoretical performance limit of any direct detection system. The primary components of a PIAACMC system are the Phase Induced Amplitude Apodization (PIAA) optics and the complex phase-shifting focal plane mask. PIAA optics have been produced and demonstrated with high coronagraph performance. In this paper, we describe the design process for the phase-shifting focal plane mask, and strategies for smoothing the mask profile. We describe the mask manufacturing process and show manufacturing results. Errors in the fabricated mask profile degrade the system performance, but we can recover performance by refining the manufacturing process and implementing wavefront control.

Design of off-axis mirrors for the phase-induced amplitude apodization complex mask coronagraph

The phase-induced amplitude apodization complex mask coronagraph (PIAACMC) provides an efficient way to control diffraction propagation effects caused by the central obstruction/segmented mirrors of the telescope. PIAACMC can be optimized in a way that takes into account both chromatic diffraction effects caused by the telescope obstructed aperture and the tip-tilt sensitivity of the coronagraph. As a result, unlike classic phase-induced amplitude apodization (PIAA), the PIAACMC mirror shapes are often slightly asymmetric even for an on-axis configuration and require more care in calculating off-axis shapes when an off-axis configuration is preferred. A method to design off-axis PIAA mirror shapes given an on-axis mirror design is presented. The algorithm is based on geometrical ray tracing and is able to calculate off-axis PIAA mirror shapes for an arbitrary geometry of the input and output beams. The method is demonstrated using the third generation PIAACMC design for WFIRST-AFTA telescope. Geometrical optics design issues related to the off-axis diffraction propagation effects are also discussed.

Impact of WFIRST-AFTA line-of-sight jitter distributions on phase-induced amplitude apodization complex mask coronagraph science yield

A framework for evaluating the science yield of a coronagraph in the presence of a variety of line-of-sight jitter environments is described and the use of a tip-tilt threshold for improving science yield is proposed. The current expectations of the WFIRST-AFTA mission are used for specific distributions of line-of-sight jitter, including the current expectations for tip-tilt correction using a low-order wavefront sensor/control. The effect of the residual tip-tilt on the phase-induced amplitude apodization complex mask coronagraph (PIAACMC) architecture is considered, because the performance of the PIAACMC architecture is expected to be dominated by tip-tilt sensitivity, implying that this treatment has a large impact on the final science yield. The most important outcomes of this study are that the rms residual tip-tilt expected after correction is 0.6 mas rms/axis and that by eliminating some science frames during analysis through a tip-tilt threshold, the number of planets observable increases by ∼25% for the 550-nm imaging channel. The number of known radial velocity planets expected to be observed ranges from 29 to 78 at 550 nm and from 9 to 12 at 890 nm.

HIGH PERFORMANCE LYOT AND PIAA CORONAGRAPHY FOR ARBITRARILY SHAPED TELESCOPE APERTURES

Two high performance coronagraphic approaches compatible with segmented and obstructed telescope pupils are described. Both concepts use entrance pupil amplitude apodization and a combined phase and amplitude focal plane mask to achieve full coronagraphic extinction of an on-axis point source. While the first concept, named Apodized Pupil Complex Mask Lyot Coronagraph (APCMLC), relies on a transmission mask to perform the pupil apodization, the second concept, named Phase-Induced Amplitude Apodization complex mask coronagraph (PIAACMC), uses beam remapping for lossless apodization. Both concepts theoretically offer complete coronagraphic extinction (infinite contrast) of a point source in monochromatic light, with high throughput and sub-lambda/D inner working angle, regardless of aperture shape. The PIAACMC offers nearly 100% throughput and approaches the fundamental coronagraph performance limit imposed by first principles. The steps toward designing the coronagraphs for arbitrary apertures are described for monochromatic light. Designs for the APCMLC and the higher performance PIAACMC are shown for several monolith and segmented apertures, such as the apertures of the Subaru Telescope, Giant Magellan Telescope (GMT), Thirty Meter Telescope (TMT), the European Extremely Large Telescope (E-ELT) and the Large Binocular Telescope (LBT). Performance in broadband light is also quantified, suggesting that the monochromatic designs are suitable for use in up to 20% wide spectral bands for ground-based telescopes.

HIGH PERFORMANCE PIAA CORONAGRAPHY WITH COMPLEX AMPLITUDE FOCAL PLANE MASKS

We describe a coronagraph approach where the performance of a Phase-Induced Amplitude Apodization (PIAA) coronagraph is improved by using a partially transmissive phase-shifting focal plane mask and a Lyot stop. This approach combines the low inner working angle offered by phase mask coronagraphy, the full throughput and uncompromized angular resolution of the PIAA approach, and the design flexibility of Apodized Pupil Lyot Coronagraph. A PIAA complex mask coronagraph (PIAACMC) is fully described by the focal plane mask size, or, equivalently, its complex transmission which ranges from 0 (opaque) to -1 (phase shifting). For all values of the transmission, the PIAACMC theoretically offers full on-axis extinction and 100% throughput at large angular separations. With a pure phase focal plane mask (complex transmission = -1), the PIAACMC offers 50% throughput at 0.64 {lambda}/D while providing total extinction of an on-axis point source. This performance is very close to the 'fundamental performance limit' of coronagraphy derived from first principles. For very high contrast level, imaging performance with PIAACMC is in practice limited by the angular size of the on-axis target (usually a star). We show that this fundamental limitation must be taken into account when choosing the optimal value of the focal planemore » mask size in the PIAACMC design. We show that the PIAACMC enables visible imaging of Jupiter-like planets at {approx}1.2 {lambda}/D from the host star, and can therefore offer almost three times more targets than a PIAA coronagraph optimized for this type of observation. We find that for visible imaging of Earth-like planets, the PIAACMC gain over a PIAA is probably much smaller, as coronagraphic performance is then strongly constrained by stellar angular size. For observations at 'low' contrast (below {approx} 10{sup 8}), the PIAACMC offers significant performance enhancement over PIAA. This is especially relevant for ground-based high contrast imaging systems in the near-IR, where PIAACMC enables high contrast high efficiency imaging within 1 {lambda}/D. Manufacturing tolerances for the focal plane mask are quantified for a few representative PIAACMC designs.« less