Phase Change Materials For Storage Research Articles

Enhancing Thermal Energy Storage: Investigating the Use of Graphene Nanoplatelets in Phase Change Materials for Sustainable Applications

The adoption of phase change materials (PCMs) for thermal energy storage in low‐ and medium‐temperature settings is witnessing a notable surge. However, the lesser thermal conductivity (TC) poses a noteworthy challenge to PCM's heat transfer and storage capabilities. One of the noteworthy solutions to augment the TC is incorporating nanoparticles in the PCM. Nevertheless, nanoparticles often clump together after several cycles due to poor compatibility and weak interfacial strength. Functionalization methods have been proposed to address this issue, offering improved performance for energy storage applications. Herein, graphene nanoplatelets (GNP) and functionalized graphene nanoplatelets (FGNP) are dispersed into A70 PCM at mass fractions ranging from 0.1 to 1.0 wt% using two‐step method. Fourier transform infrared analysis confirms the successful integration of FGNP into A70 PCM without altering its chemical characteristics. Adding 1.0 wt% FGNP to A70 PCM increases its TC by 140.88%, with just a 3.02% decrease in latent heat enthalpy. However, incorporating pure GNP (1.0 wt%) improves TC by 48.83%. The engineered nano‐PCMs exhibit robust thermal and chemical stability even after undergoing 1000 thermal cycles, remaining unchanged up to 414.64 °C. This exceptional stability makes the formulated nanoenhanced PCM suitable for sustainable thermal applications.

Development and reliability assessment of nano-enhanced novel organic eutectic mixtures as phase change materials for latent heat energy storage

Development and reliability assessment of nano-enhanced novel organic eutectic mixtures as phase change materials for latent heat energy storage

Functional Soft Materials with Resistance to Liquid Leakage for Thermal Energy Storage

AbstractFunctional soft materials have great potential commercial applications in thermal energy storage, which are required to have a long life, good flexibility, and resistance to liquid leakage. Herein, a composite hydrogel with thermal storage properties is prepared through coupling molecular self‐assembly and in situ polymerization. Hydrophobic stearic acid (SA), as a thermal storage phase change material (PCM), is dispersed in polyacrylamide (PAM) hydrogel network in the form of oil–water emulsion (O/W). The PAM polymer network with good flexibility physically limits high‐frequency collision between SA PCM droplets. This unique design avoids demulsification in phase change emulsion so that the as‐prepared hydrogel composite can resist liquid leakage. The PAM hydrogel network plays the role of heterogeneous nucleation, resulting in the super‐cooling of SA emulsion at only 0.3 °C. On the other hand, SA PCM droplets in as‐prepared soft material do not directly contact with liquid water, so melting/crystallization process is independent of water. As a result, the soft material exhibits a thermal storage density of up to 99.3 J g−1. The present study is an important step toward designing soft energy storage materials.

Multi-objective optimization and 3E analysis for solar-driven dual ejector refrigeration and phase change material as thermal energy storage

Ejector refrigeration cycles have garnered attention due to their inherent advantages, including simplicity, the ability to leverage low-temperature energy sources, and reduced reliance on high electrical power requirements. Optimizing these systems becomes pivotal, given the inherent challenges of low efficiency in ejector refrigeration cycles. This study explores an ejector refrigeration cycle incorporating a secondary ejector to recover expansion energy from the condenser. Solar collectors provide the necessary heat for the cycle, utilizing phase change materials for thermal storage. Initially, the impact of five key parameters, generator temperature, condenser temperature, evaporator temperature, collector area, and storage tank volume, on the cycle's performance is thoroughly investigated. Subsequently, a three-objective optimization is executed, resulting in optimal values for the mentioned parameters: 83.4 °C for the generator temperature, 35.8 °C for the condenser temperature, 6.8 °C for the evaporator temperature, 82 m2 for the collector area, and 4 m3 for the storage tank volume. The analysis of energy, exergy and exergeoeconomics for the optimal point showed that the exergy efficiency for the ejector and solar cycle is 6.78 % and 10.74 %, respectively. Also, the COP of the refrigeration cycle was obtained as 0.1858. The results showed that the solar fraction is equal to 65.4 %, and the highest amount of exergy destruction is related to solar collectors, which is equal to 8.136 kW.

A study on novel dual-functional photothermal material for high-efficient solar energy harvesting and storage

The solar-heat storage efficiency of devices based on phase change materials (PCMs) is limited due to the light absorption and internal heat transfer within the PCMs, unclear thermal conductivity-enhancement mechanism within nanocomposite PCMs, and uncontrollable photothermal-interface modulation. Therefore, a novel controllable strategy was proposed in this study to fabricate dual-functional photothermal storage three-dimensional (3D) phase change blocks (PCBs) with higher thermal conductivity (27.98 W/m·K) and spectral absorption (98.03%) compared to those of most previously reported PCM-based devices. The as-synthesized PCBs contained millimeter-sized graphite plates with horizontal Van der Waals bonds and oriented micro/nanoscale graphite nanosheets. The structural properties of thin PCM layers between the PCB sheets have synergistically reduced the internal interfacial thermal resistance of the PCBs. Laser-controllable induction was used to fabricate integrated biomimetic-forest 3D optical absorbers on the high thermal conductivity interface of the PCBs, which significantly reduced the thermal resistance of the optical-thermal interface. The resulting 3D-PCBs, integrated with thermoelectric generators, powered portable electronic devices, expanding the applications of traditional PCM heat-storage devices. Therefore, this study will guide the future design of high-performance solar-thermal storage PCMs with a wide range of practical applications.

Hectorite aerogel stabilized NaCl solution as composite phase change materials for subzero cold energy storage

Inorganic phase change cold storage materials have garnered significant interest in cold chain transportation due to their high energy storage density. Nevertheless, practical applications have been hindered by inherent limitations such as high supercooling and susceptibility to phase separation. To address these challenges, this study devised 3D-Hectorite/sodium chloride (NaCl) composite phase change cold storage materials by utilizing 3D-Hectorite aerogel to adsorb NaCl solution, effectively mitigating the issue of phase separation common in such materials. Additionally, various concentrations of nucleating agents such as SrCl2·6H2O, borax, and diatomite were introduced for step cooling curve tests, establishing 0.03% diatomite as the optimal concentration for nucleation, reducing the supercooling of the NaCl solution to 1.1 °C. The results showed that the latent heat and thermal conductivity of 3D-Hectorite/NaCl were 215.30 J/g and 0.6315 ± 0.013 W/mK, respectively. The phase transition temperature could be adjusted in the range of -33~0 °C by changing the concentration of NaCl to meet the different temperature requirements. Furthermore, exceptional cyclic stability was observed even after subjecting the material to ten dissolution-solidification cycles. Analyzing the temperature change of the air inside the insulation bag showed that, compared with ice, 3D-Hectorite/NaCl can be applied to meet lower cooling temperature requirements, demonstrating good prospects for its application in cold chain transportation.

Preparation of mono-sized high sphericity Al-Si alloy particles for thermal energy storage materials by pulsated orifice ejection method

The demand for Al-Si particles with high sphericity and narrow size distribution is growing in the field of thermal energy storage. In this study, a novel pulsated orifice ejection method (POEM) was successfully employed to produce different-sized Al-Si alloy particles. The analysis indicates that such particles exhibit high sphericity, with each particle having a sphericity exceeding 0.9. The particles are precisely size-controllable and mono-sized, thereby ensuring that they have the identical thermal history. The combination of cooling rate calculation and particle structure analysis indicates that the particles prepared by POEM exhibit higher cooling rates through rapid solidification, resulting in finer and more uniform microstructures. The thermal analysis results demonstrate that the Al-Si alloy particles prepared in this study have high melting latent heat (approximately 500.87 J/g) and solidification latent heat (approximately 467.26 J/g), showcasing their potential as high-efficiency phase change materials for high-temperature thermal energy storage.

Shape-stable phase change materials based on carboxymethyl chitosan/boron nitride nanosheets high-strength aerogel

The application of phase change materials (PCMs) in energy storage and temperature control systems holds significant promise for enhancing energy efficiency and environmental sustainability. Herein, the development of a boron nitride nano-aerogel-supported PCM, reinforced by carboxymethyl chitosan (CMCS) and oxidized corn starch (DCS) cross-linking was reported. This approach involved the utilization of polydopamine-modified boron nitride nanosheets (PDA@BNNS) for the fabrication of a thermally conductive skeleton, while carboxymethyl chitosan (CMCS) and oxidized corn starch (DCS) were utilized as reinforcing material and cross-linking agent, respectively. The skeleton was prepared via a sol-gel method and freeze-drying technique, while polyethylene glycol (PEG) was subsequently encapsulated using a vacuum impregnation method. Notably, the prepared skeleton exhibits a compressive stress of 12.18 MPa at 80 % strain, much higher than other boron nitride nanosheets aerogels reported in literature. The cross-linked boron nitride skeleton enhances the thermal conductivity of the composites by 137.4 % compared to pure PEG. Furthermore, due to the highly porous structure of the skeleton, the PEG mass fraction reaches 96.0 wt%, resulting in a phase change enthalpy of 181.5 J/g. The results suggest that this composite material is a promising PCM candidate for thermal energy storage applications.

Coconut shell-derived activated carbon-enhanced water phase change material for cold thermal energy storage.

In building cooling, the demand for cooling surges during specific times, stressing air-conditioner operation, and additional cooling is often wasted during low-demand periods. Water-phase change material (W-PCM)-based thermal energy storage (TES) allows for load shifting and effective management of peak demand by storing cooling energy when the demand is low. This stored energy can be deployed during peak hours, decreasing energy usage and associated CO2 emissions. However, the use of W-PCMs was hindered by phase separation, slow energy transfer, and high supercooling degree (SCD). We synthesized coconut shell (CNS)-produced activated carbon (ACC) to use as a thermal enhancer in W-PCMs for the first time. First, ACC was synthesized from CNS via steam activation. Then, transmission electron microscopy was used to confirm the pore morphology of the CNS-ACC.The synthesis of the W-PCM with various weight percentages (0.1, 0.6, and 1.2) of CNS-ACC was accomplished in two steps. Zeta potential distribution analysis revealed that the W-PCM with CNS-ACC exhibited colloidal stability. Thermal conductivity (TC) and thermogram analyses revealed that a dose of 1.2 wt% CNS-ACC enhanced liquid and solid TC by 9% and 22%, respectively, despite a 6% and 8% decrease in specific heat and latent heat. More specifically, solidification assessment in a spherical enclosure revealed 100% suppression of SCD with 1.2 wt% CNS-ACC. As a result of this and the enhanced TC, the overall solidification process was accelerated, reducing the overall duration by 18.5%. Thus, the combination of CNS-derived ACC and W-PCM for TES in building cooling could reduce energy consumption and associated CO2 emissions.

Preparation and Thermal Performances of Lauric Acid/Polyvinyl Butyral/Graphene Nanoplates Composite Phase Change Materials

In recent years, there has been significant progress in the development and application of phase change materials (PCMs) for thermal energy storage. The new lauric acid (LA)/polyvinyl butyral (PVB)/graphene nanoplates (GNP) composite phase change materials (CPCM) are prepared using the solution blending method, in which LA acts as PCM, PVB serves as support material, and GNP is used as thermally conductive enhancer. The prepared CPCM with 80 wt% LA can retain stable shape without leakage. The Fourier‐transform infrared and X‐ray diffractometer results indicate that there is no chemical reaction among the various components of the CPCM. The differential scanning calorimeter results show the CPCM3 (with 80 wt% LA and 5 wt% GNP) has melting latent heat of 134.41 KJ Kg−1 with melting temperature of 41.73 °C. The thermal conductivity tests present that thermal conductivity of CPCM3 is 0.689 W (m K)−1, which is 3.83 times that of the PCM2. The thermogravimetric analyzer results verify that the CPCM possess good thermal stability within the operating temperature range of 35–45 °C without any degradation. The thermal cycling tests indicate that CPCM have good thermal reliability. Therefore, it has promising applications in building energy conservation, solar thermal systems, thermal management, and textiles.

Thermal management of PV based on latent energy storage of composite phase change material: A system-level analysis with pore-scale model

Perovskite Solar Cell (PSC) have recently emerged as exciting new candidates of Photovatics (PVs) for solar-to-electrical energy conversion. Nevertheless, one huge obstacle to its commercialization is how to improve its tolerance to operation at elevated temperatures. To address this issue, Composite Phase Change Material (CPCM) incorporated with a porous skeleton structure is proposed to integrate with PVs. In this structure, an important theoretical problem is that the temperature dependence of PV and the temperature control behavior of CPCMs interact with each other (bidirectional relationship). In this work, a pore-scale lattice Boltzmann phase change model is established to describe the dynamic thermal behavior of CPCMs and explore the roles of the bidirectional relationship between PVs and CPCMs, the change of power conversion efficiency influenced by temperature variation and glass transmissivity is discussed by comparing the overall liquid fraction of CPCMs, and the average temperature and power conversion efficiency of PVs. Furthermore, the situation of time-varying solar irradiation is discussed to mimic real application conditions. Results indicate that the neglecting temperature dependency of PVs leads to underestimation of PV surface temperatures and overestimation of power conversion efficiencies, while glass transmissivity provides reverse effects. These phenomena not only happen in constant solar irradiation but also in varying solar irradiation, calling for increasing attention to designing PV/CPCMs for varying heat flux conditions. The findings of this work establish a comprehensive manner toward integrated design of CPCMs for PV thermal control.

Preparation and thermal performance enhancement of roasted iron tailings based shape-stabilized phase change materials for thermal storage

A new type of shape-stabilized phase change material (SSPCM) was fabricated for thermal energy storage (TES) using a facile synthetic strategy. Lauric acid (LA) was synchronously incorporated into the structural framework of roasted iron tailings (RIT) and graphene nanoparticles (GNP), in which RIT and GNP served as an ideal compatible supporting matrix, meanwhile, GNP was employed as a superior thermal conductivity additive, and LA acted as the working medium. The leakage results of the prepared composites were qualitatively and quantitatively analyzed. The surface morphology, chemical structure, thermal properties, heat transfer efficiency, thermal reliability, and thermal stability of the prepared SSPCMs were examined systematically. The prepared LA/RIT/GNP (5%) SSPCM exhibited relatively excellent thermal performance, which can meet the requirement of the future applications. Particularly, compared to pure LA, the measured thermal conductivity of LA/RIT/GNP (5%) with the addition of GNP was 9.03 times higher. The heat transfer efficiency of SSPCM was augmented by 91.67%. The mechanism of the improvement in thermal performance was revealed by the analysis of the microstructure characteristic parameters. In conclusion, the prepared SSPCM not only has great value in the low-temperature field of TES but also provides a new approach for high-value use of solid waste tailings, which expands the conventional utilization of iron tailings with a high-value approach.

Production and assessment of UV-cured resin coated stearyl alcohol/expanded graphite as novel shape-stable composite phase change material for thermal energy storage

Expanded graphite-phase change materials (PCM) structures are reinforced to polymers with various methods to fabricate advanced thermal energy storage materials. However, these methods still suffer from processing time and product efficiency challenges. In this study, the UV-curing method was used to produce shape-stable EG-PCM-reinforced resin composites with fast curing and low process temperature of the resin. The composite material, comprising UV-curable resin (30 %), stearyl alcohol (65 %), and Expanded graphite (5 %), was synthesized. This synthesis aimed to address the limitations of traditional PCMs, such as low thermal conductivity and leakage. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the materials' phase change behavior and thermal stability. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) analyses were conducted to elucidate the microstructure and crystallinity of composite materials. The composites, exhibiting near-perfect impermeability with leakage as minimal as 0.89 %, not only enable the attainment of cooler environments by 2–3 °C under hot air conditions but also demonstrate exceptional thermal stability up to 207 °C, as evidenced by TGA results. Additionally, they offer a remarkable melting enthalpy value of 153.1 J/g. These composites, with their shape-retention ability during phase transitions and high thermal energy storage capacity, are a versatile and efficient option for sustainable energy management. This research contributes to the development of innovative materials for renewable energy integration and reducing carbon emissions.

Analysis of Solar Water Heater with Modification Absorber Plate Integrated Thermal Storage

In various countries worldwide, solar water heater systems (SWHs) are utilized as devices that harness solar energy as a primary energy source. This study investigates the performance of SWHs numerical simulation by integrating phase change material (PCM) paraffin wax onto an absorber plate collector at the bottom for thermal storage. This study presents the thermal performance of a SWHs that uses an absorber plate with PCM for thermal energy storage. In this test, four variations of the model tested, namely a) standard flat plate (SFP), b) standard flat plate with PCM storage thickness 10mm (SFP+PCM 10mm), c) standard flat plate with PCM storage thickness 7mm (SFP+PCM 7mm), and d) standard flat plate with PCM storage thickness 4mm (SFP+PCM 4mm), were investigated using numerical simulation. Initially, an analytical investigation was conducted to examine the material qualities of paraffin wax utilised for phase change material (PCM) storage. The SWH systems were subsequently imported and simulated under three different levels of continuous solar radiation: 400 W/m2 700 W/m2 and 1000 W/m2. The simulation incorporates the use of computational fluid dynamics (CFD) tools. The results of the study revealed that the collector of the SWH system, which utilised an absorber plate containing phase change material (PCM) storage, demonstrated exceptional performance. Models with a thickness of 7mm PCM or SFP+PCM 7mm have the highest efficiency compared to other models with an efficiency value of 64%. There is a 3-4% increase in efficiency with variations in models that use PCM thermal storage compared to models that do not use PCM thermal storage.

Biodegradable polylactic acid/polyethylene glycol blends as form-stable phase change materials for thermal energy storage and management

Polyethylene glycol (PEG) is a commonly used phase change material for thermal energy storage. It can store amounts of heat in the process of phase transition, whereas the solid-to-liquid transition requires it to be form-stabilized before application. In this study, a phase change composite with form-stability and processibility is prepared by simply blending PLA with PEG at 180 °C, reaching a maximum PEG loading of 90 wt%. The preparation is easy, cheap, environmental-benign, and scalable. Besides, the obtained PLA/PEG (PLEG) composites are feasible for regulating the thermal behaviors of batteries operated at high rates, providing a low-cost and simple approach to improving the cyclability of fast-charging batteries.

A novel cement mortar comprising natural zeolite/dodecyl alcohol shape stable composite phase change material for energy effective buildings

Investigations into Phase Change Materials (PCMs) for heat storage in facilities have gained significance, contributing to indoor temperature regulation, decreased energy usage, and improved building efficiency, thereby supporting sustainability initiatives. However, the issue of PCM leakage during the heating phase has constrained its thermal energy storage (TES) prospective at large scaled-practices. Addressing this concern, the present study emphases on elimination of the leakage problem of dodecyl alcohol (DA) as a PCM with appropriate melting temperature for building TES request by its impregnating into the natural zeolite (NZ) as a low cost host matrix. In the second stage of the work, using the developed shape stable-NZ/DA (SS-NZ/DA) composite PCM in cement mortar instead of sand, novel cementitious mortars with enhanced thermal properties were created by incorporating different weight percentages (25 %, 50 %, 75 %, and 100 %) compared to the mortar comprising NZ. Experimental works were carried out to analyze the shape-stability, TES features, cycling TES stability and thermal endurance of the SS-NZ/DA composite as well the physical properties, mechanical strength, and solar temperature regulation performance of the SS-NZ/DA included mortars. The SS-NZ/DA demonstrated the melting enthalpy of 107.5 J/g at 19.47 °C and a freezing enthalpy of 106.1 J/g at 19.86 °C. The performance test results obtained under real weather conditions indicated that the integration of SS-NZ/DA into mortar presented maximum drop of 10 % and 9.26 % in peak indoor temperature at the SS-CPCM slab surface and the center of SS-CPCM slab-cabin, respectively, accompanied by an approximate 3-hour time delay. Mortars with SS-NZ/DA composite PCM exhibited a decreased dry unit weight (1189 kg/m3) and thermal conductivity (0.394 W/mK) while experiencing a moderate strength loss (4.5 MPa). These favorable physico-mechanical properties, TES characteristics and thermal management capability make the novel cementitious mortar containing composite PCM as an energy-efficient material for creating thermo-regulative building components. In this study, the natural, economical, and environmentally friendly nature of the NZ material used for PCM impregnation, its ability to contain a high percentage of PCM (up to 45 %) without any leakage issues, is the most fundamental and important characteristic of the composite used. The most unique feature of this composite mortar is the ability to achieve sufficient mechanical and thermal properties in cementitious mortars produced using this composite material without any leakage problems.

Preparation and characteristic of palmitic acid/flower-shaped CuS composite phase change material for effective heat storage and photothermal conversion

Designing and synthesizing the excellent heat storage and photothermal integrated composite phase change materials (PCMs) is an effective strategy for solar energy utilization. This work focuses on two kinds of CuS (cuboidal and 3D flower-shaped) with different morphology were designed as substrates and photothermal materials, and PA/F–CuS and PA/C–CuS composite PCMs have been prepared by melt-blending and vacuum impregnation method. Through SEM and pore structure characterization as well as leakage testing, it is proved that 3D layered flower-shaped CuS not only exposes the large specific surface area and rich adsorption sites, but also 2D thin layers can perform multiple reflections to improve the utilization rate of solar energy. The flower-shaped CuS is more suitable for the supporting material. Noteworthy, the latent heat of PA/F–CuS can reach 226.3 J/g, and the thermal conductivity is 0.3447 W/(m·K). Furthermore, compared with pure PA, the photothermal property of PA/F–CuS increased by 49.22–84.59%, and the photothermal conversion efficiency can reach 70.3%. This work provides an innovative idea for the design and manufacture of composite PCMs related to medium and low temperature solar energy storage, and has broad application potential in the field of thermal energy storage such as solar energy utilization and building insulation materials.

Synergistic enhancement of photothermal energy storage capacity of polyethylene glycol by polydopamine and nano-copper particles

Phase change materials (PCMs) are a crucial focus of research in the field of photothermal energy storage. However, due to their inherently low photothermal conversion efficiency, traditional PCMs absorb solar energy scarcely. The photothermal conversion ability of PCMs are usually enhanced by incorporating photothermal conversion nanoparticles. Polydopamine (PDA) is widely used in various fields due to its excellent photothermal conversion and adhesion performance. We dispersed PDA into PEG containing CuNPs to test the effect of PDA on thermal properties of cPCMs. Our team has conducted experiments to test the thermal characteristics and photothermal conversion ability of cPCMs. Results demonstrated that the addition of PDA mitigated the enthalpy loss caused by integrating CuNPs. The enthalpy of melting of cPCMs with addition of polydopamine is greater than that without polydopamine for the composites with different mass fractions. The addition of PDA in cPCMs enhanced their photothermal conversion capacity, resulting in higher temperatures being achieved within the same exposure time compared to samples without PDA. Therefore, the cPCMs with dispersed polydopamine can store higher energy. Meanwhile, PDA also improved the overall thermal conductivity of the material. Our work provided a new method to utilize the photothermal properties of polydopamine. Meanwhile, it can reduce the cost of photothermal energy storage PCMs and further improve the potential of PCM energy storage.

Scattered Co-anchored MoS2 synergistically boosting photothermal capture and storage of phase change materials

Pristine phase change materials (PCMs) suffer from inherent deficiencies of poor solar absorption and photothermal conversion. Herein, we proposed a strategy of co-incorporation of zero-dimensional (0D) metal nanoparticles and two-dimensional (2D) photothermal materials in PCMs for efficient capture and conversion of solar energy into thermal energy. Highly scattered Co-anchored MoS2 nanoflower cluster serving as photon and phonon triggers was prepared by in-situ hydrothermal growth of ZIF67 polyhedron on 2D MoS2 and subsequent high-temperature carbonization. After encapsulating thermal storage unit (paraffin wax), the obtained composite PCMs integrated high-performance photothermal conversion and thermal energy storage capability. Benefiting from the synergistic enhancement of 0D Co nanoparticles with localized surface plasmon resonance effect, carbon layer with the conjugation effect and 2D MoS2 with strong solar absorption, composite PCMs exhibited a high photothermal conversion efficiency of 95.19%. Additionally, the resulting composite PCMs also demonstrated long-term thermal storage stability and durable structural stability after 300 thermal cycles. The proposed collaborative co-incorporation strategy provides some innovative references for developing next-generation photothermal PCMs in solar energy utilization.

Numerical simulation of various PCM container configurations for solar dryer application

In the context of solar dryers, where drying time is constrained by available sunshine hours and excessive heat during these periods can potentially lead to mineral loss in food, the incorporation of phase change material (PCM) for thermal energy storage emerges as a viable solution. However, the response time of PCMs plays a major role in its charging and discharging in solar dryer performance, prompting extensive research into PCM container configurations to reduce this limitation. Investigations have been conducted through numerical simulations and experimental studies to explore various configurations of PCM. In this study, four distinct container configurations were employed, alongside the introduction of fins, with two variations: solid and hollow. In this regard, Paraffin RT58, with its melting point closely aligned with the operating temperature of the solar dryer, is considered a suitable choice in simulation using ANSYS Fluent. The simulation results revealed that the horizontal rectangles demonstrate the quickest rates for melting and solidification, whereas the cylindrical shape exhibits the most extended durations for these processes. The introduction of fins has a notable impact on reducing both melting and solidification times, with a further decrease observed as the number of fins increases. While solid fins provide slightly superior reductions in melting and solidification times, opting for hollow fins presents benefits in terms of material efficiency, weight reduction, and cost savings.