Training Phantom Research Articles

An anthropomorphic phantom for atrial transseptal puncture simulation training

BackgroundTransseptal puncture (TSP) is a critical prerequisite for left-sided cardiac interventions, such as atrial fibrillation (AF) ablation and left atrial appendage closure. Despite its routine nature, TSP can be technically demanding and carries a risk of complications. This study presents a novel, patient-specific, anthropomorphic phantom for TSP simulation training that can be used with X-ray fluoroscopy and ultrasound imaging.MethodsThe TSP phantom was developed using additive manufacturing techniques and features a replaceable fossa ovalis (FO) component to allow for multiple punctures without replacing the entire model. Four cardiologists and one cardiology trainee performed TSP on the simulator, and their performance was assessed using four metrics: global isotropy index, distance from the centroid, time taken to perform TSP, and a set of 5-point Likert scale questions to evaluate the clinicians’ perception of the phantom’s realism and utility.ResultsThe results demonstrate the simulator’s potential as a training tool for interventional cardiology, providing a realistic and controllable environment for clinicians to refine their TSP skills. Experienced cardiologists tended to cluster their puncture points closer to regions of the FO associated with higher global isotropy index scores, indicating a relationship between experience and optimal puncture localization. The questionnaire analysis revealed that participants generally agreed on the phantom’s realistic anatomical representation and ability to accurately visualize the TSP site under fluoroscopic guidance.ConclusionsThe TSP simulator can be incorporated into training programs, offering trainees the opportunity to improve tool handling, spatial coordination, and manual dexterity prior to performing the procedure on patients. Further studies with larger sample sizes and longitudinal assessments are needed to establish the simulator’s impact on TSP performance and patient outcomes.

341 Ultrasound-Guided Vascular Access Training: The Need for Novel Training Phantoms With Realistic Vascular Anatomy and Patient Positioning

341 Ultrasound-Guided Vascular Access Training: The Need for Novel Training Phantoms With Realistic Vascular Anatomy and Patient Positioning

Development of a patient-specific model of the human coronary system for percutaneous transluminal coronary angioplasty balloon catheter training and testing

BackgroundTo treat stenosed coronary arteries, percutaneous transluminal coronary angioplasty (PTCA) balloon catheters must combine pushability, trackability, crossability, and rewrap behavior. The existing anatomic track model (ASTM F2394) for catheter testing lacks 3D morphology, vessel tortuosity, and compliance, making evaluating performance characteristics difficult. This study aimed to develop a three-dimensional patient-specific phantom (3DPSP) for device testing and safe training for interventional cardiologists.MethodsA range of silicone materials with different shore hardnesses (00–30–45 A) and wall thicknesses (0.5 mm, 1 mm, 2 mm) were tested to determine compliance for creating coronary vessel phantoms. Compliance was assessed using optical coherence tomography (OCT) and compared to values in the literature. Stenosis was induced using multilayer casting and brushing methods, with gypsum added for calcification. The radial tensile properties of the samples were investigated, and the relationship between Young’s modulus and compliance was determined. Various methods have been introduced to approximate the friction between silicone and real coronary vessel walls. Computerized tomography (CT) scans were used to obtain patient-specific anatomy from the femoral artery to the coronary arteries. Artery lumens were segmented from the CT scans to create dissolvable 3D-printed core models.ResultsA 15A shore hardness silicone yielded an experimental compliance of 12.3–22.4 mm2mmHg·103\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\frac{m{m}^{2}}{mmHg}\\cdot {10}^{3}$$\\end{document} for stenosed tubes and 14.7–57.9 mm2mmHg·103\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\frac{m{m}^{2}}{mmHg}\\cdot {10}^{3}$$\\end{document} for uniform tubes, aligning closely with the literature data (6.28–40.88 mm2mmHg·103\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\frac{m{m}^{2}}{mmHg}\\cdot {10}^{3}$$\\end{document}). The Young’s modulus ranged from 43.2 to 75.5 kPa and 56.6–67.9 kPa for the uniform and calcified materials, respectively. The dependency of the compliance on the wall thickness, Young’s modulus, and inner diameter could be shown. Introducing a lubricant reduced the silicone friction coefficient from 0.52 to 0.13. The 3DPSP was successfully fabricated, and comparative analyses were conducted among eight commercially available catheters.ConclusionThis study presents a novel method for crafting 3DPSPs with realistic mechanical and frictional properties. The proposed approach enables the creation of comprehensive and anatomically precise setups spanning the right femoral artery to the coronary arteries, highlighting the importance of such realistic environments for advancing medical device development and fostering safe training conditions.

An Introduction to Ventra: A Programmable Abdominal Phantom for Training, Educational, Research, and Development Purposes.

Intra-abdominal pressure (IAP) is a critical parameter in the care of critically ill patients, as elevated IAP can lead to reduced cardiac output and organ perfusion, potentially resulting in multiple organ dysfunction and failure. The current gold standard for measuring IAP is an indirect technique via the bladder. According to the Abdominal Compartment Society's Guidelines, new measurement methods/devices for IAP must be validated against the gold standard. This study introduces Ventra, an abdominal phantom designed to simulate different IAP levels, abdominal compliance, respiration-related IAP variations, and bladder dynamics. Ventra aims to facilitate the development and validation of new IAP measurement devices while reducing reliance on animal and cadaveric studies. Additionally, it offers potential applications in training and education for biomedical engineering students. This study provides a thorough explanation on the phantom's design and fabrication, which provides a low-cost solution for advancing IAP measurement research and education. The design concept, technical aspects, and a series of validation experiments determining whether Ventra is a suitable tool for future research are presented in this study. Ventra's performance was evaluated through a series of validation tests using a pressure gauge and two intra-gastric (Spiegelberg and CiMON) and two intra-bladder (Accuryn and TraumaGuard) pressure measurement devices. The mean and standard deviation of IAP recordings by each device were investigated. Bland-Altman analysis was used to evaluate bias, precision, limits of agreement, and percentage error for each system. Concordance analysis was performed to assess the ability of Ventra in tracking IAP changes. The phantom demonstrated excellent agreement with reference pressure measurements, showing an average bias of 0.11 ± 0.49 mmHg. A concordance coefficient of 100% was observed for the phantom as well. Ventra accurately simulated different abdominal compliances, with higher IAP values resulting in lower compliance. Abdominal volume changes showed a bias of 0.08 ± 0.07 L/min, and bladder fill volume measurements showed an average difference of 0.90 ± 4.33 mL for volumes ranging from 50 to 500 mL. The validation results were in agreement with the research guidelines of the world abdominal society. Ventra is a reliable tool that will facilitate the development and validation of new IAP measurement devices. It is an effective educational tool for biomedical engineering students as well.

Conductive Gel Phantoms for Training in Electrosurgery

Conductive Gel Phantoms for Training in Electrosurgery

Fun with electricity: A novel ballistics gelatin model with LED tracking for ultrasound needle guidance.

Use of ultrasound (US) for procedural needle guidance can improve success rates, safety, and accuracy. Often, training is performed on task trainers, which can be prohibitively expensive. Determining undesired needle placement is difficult when the needle is poorly visualized with US. Currently available simulation phantoms cannot provide real-time feedback on the location of needle placement. The primary objective was to develop and determine feasibility of a low-cost simulation phantom with an internal circuit and LED light system to determine when a needle contacts internal structures. We also aimed to determine whether its use was associated with increased comfort level. Emergency medicine (EM) residents (PGY-1 to PGY-3) performed in-plane and out-of-plane US needle guidance using homemade phantoms. Comfort levels were assessed by pre- and post intervention survey. Outcomes were measured on Likert scale (minimum = 1, maximum = 5). The primary outcome was change in confidence markers before and after the simulation task. Secondary outcomes were survey results of comparisons of these models to prior training experiences on simulators and humans. All EM residents (30) in our program were invited to participate. Twenty participants enrolled and completed the study. In the primary outcome, median comfort with out-of-plane and in-plane guidance increased after using the model but was more pronounced for out-of-plane guidance. On a posttest survey, residents rated the models overall very similar to prior experience on simulators (median 5/5 [IQR 4.0-5.0]) and moderately similar to humans (median 3/5 [IQR 3.0-4.0]). We created a low-cost ballistic gelatin phantom with an internal electric needle guidance system. Use of the phantom for training was associated with increased learner comfort with the procedure. Learners rated the characteristics of the phantom as similar to higher-cost commercial equipment and humans.

Ex vivo liquid core fiber photometry with high-resolution 3D printing

High resolution 3D printing emerges as an alternative to microfabrication due to its fine resolution along with one-step manufacturing. Thus, it is broadly used in many fields, such as biological and chemical applications. We introduce such a technique to the design of the optofluidic probe by integrating optics and microfluidics as an ex vivo liquid core fiber photometry. We build the optofluidic probes with various T-shapes and conduct the transmission measurements and the ray tracing simulations, where the results are comparable. Through the transmission and fluorescence measurements, we obtain optimized curl T-shape dimensions of 524 µm wide, ∼50 µm thick, and 350 µm long with longitudinal spaces between them of 260 um. Furthermore, a heightened level of complexity in structure, characterized by a feature size of 25 µm, is attained through the improvement process. We conclude the feasibility of this optofluidic system with two applications: the in vivo-like setting consisting of thyroid biopsy training phantom and human plasma and the ex vivo-like setting consisting of the mice brain slices stained with wheat germ agglutinin (WGA). This prototype is an important step of establishing a 3D printing optofluidic applications for various in vivo research.

Application of Virtual Reality as a Method of First Aid Training – Results of Survey Research Conducted among the Construction Faculty Students

Aim: The survey focused on the assessment of students' knowledge after first aid training carried out using two methods. In order to check the effectiveness and compare both methods, standard training with the use of training phantoms and a BLS and AED course supported by Virtual Reality technology were organized among students. The aim was to test whether virtual reality training would be as effective as standard training with training phantoms. In addition, the study also included collecting students' subjective opinions on the use of VR technology in first aid. During the research, a research hypothesis was put forward, according to which students after standard training with the use of phantoms have more knowledge about cardiopulmonary resuscitation than students after training with the use of virtual reality. Methodology: The method of a survey was used to assess the effectiveness of training. It was attended by 57 students of Civil Engineering, aged 20 to 22. Thanks to the study, the theoretical and practical knowledge of students on first aid was verified and their subjective feelings after training with the use of VR technology were analyzed. Results: The results of the research indicate that the level of knowledge in the field of first aid is higher in students after standard training with the use of training phantoms. In this group, the respondents answered 100% correctly in 7 questions, while the respondents in the group using virtual reality answered only 4 questions correctly in 100%. Students from the first group also showed a greater knowledge of the first aid procedure – they answered correctly in 82%, and the respondents in the second group in 56%. Students from the first group also gave better answers to the questions verifying the knowledge of the principles of proper cardiopulmonary resuscitation – 85% of them answered these questions correctly, while in the second group there were less than half of the correct answers – only 40%. Conclusions: Based on the results of the research and the feelings of the students, it was concluded that training using the VR application without tactile interaction with the dummy is not sufficient. The use of physical phantoms in such training will increase the realism of the simulation and make the virtual environment better perceived by users interacting tactilely with virtual models and experiencing their (physical) properties in a tangible way. Keywords: safety, first aid training, VR, BLS, AED

Development of a liver phantom for training in the diagnosis of metastases and ultrasound-guided insertion of intratissue ablation electrodes

Development of a liver phantom for training in the diagnosis of metastases and ultrasound-guided insertion of intratissue ablation electrodes

A do it yourself (DIY) point-of-care wrist ultrasound phantom for joint access training

BackgroundJoint access is essential for arthrocentesis, or joint aspiration of fluids. Joint treatments that are not performed properly can result in avoidable patient issues such as damage to the muscles, tendons, and blood vessels surrounding the joint. The use of ultrasound has become the gold standard for this procedure and proven to be a support in the skill learning process. However, success with this equipment, particularly in small joints like the wrist, depends on a clinician's capacity to recognize the crucial landmarks that guide these procedures. Prior to executing on a real patient, task trainers have proven to be an effective way for doctors to practice and prepare for procedures. However, shortcomings of current solutions include high purchase costs, incompatibility with ultrasound imaging, and low reusability. In addition, since this is a procedure that is not performed frequently, there may not be space or resources available in healthcare facilities to accommodate one at the point of care. This study aimed to close the existing gap by developing a DIY ultrasound compatible task trainer for wrist joint access training.ResultsWe developed a novel ultrasound compatible wrist joint model that can be made from sustainable materials and reusable parts, thus reducing the costs for acquisition and environmental impact. Our model, which was produced utilizing small-batch production methods, is made up of 3D-printed bones enclosed in an ultrasound-compatible gelatin mixture. It can be easily remade after each practice session, removing needle tracks that are visible under ultrasound for conventional phantoms. The ultrasonic properties of this model were tested through pixel brightness analysis and visual inspection of simulated anatomical structures.ConclusionOur results report the advantages and limitations of the proposed model regarding production, practice, and ultrasound compatibility. While future work entails the transfer to patients of the same skill, this reusable and replicable model has proven, when presented to experts, to be successful in representing the physical characteristics and ultrasound profile of significant anatomical structures. This novel DIY product could be an effective alternative to teach procedures in the context of resource-restrained clinical simulation centers.

Gelatin-Based Liver Phantoms for Training Purposes: A Cookbook Approach.

Background: Patients with liver pathology benefit from image-guided interventions. Training for interventional procedures is recommended to be performed on liver phantoms until a basic proficiency is reached. In the last 40 years, several attempts have been made to develop materials to mimic the imaging characteristics of the human liver in order to create liver phantoms. There is still a lack of accessible, reproducible and cost-effective soft liver phantoms for image-guided procedure training. Methods: Starting from a CT-scan DICOM file, we created a 3D-printed liver mold using InVesalius (Centro de Tecnologia da informação Renato Archer CTI, InVesalius 3 open-source software, Campinas, Brazil) for segmentation, Autodesk Fusion 360 with Netfabb (Autodesk software company, Fusion 360 2.0.19426 with Autodesk Netfabb Premium 2023.0 64-Bit Edition, San Francisco, CA, USA) for 3D modeling and Stratasys Fortus 380 mc 3D printer (Stratasys 3D printing company, Fortus 380 mc 3D printer, Minneapolis, MN, USA). Using the 3D-printed mold, we created 14 gelatin-based liver phantoms with 14 different recipes, using water, cast sugar and dehydrated gelatin, 32% fat bovine milk cream with intravenous lipid solution and technical alcohol in different amounts. We tested all these phantoms as well as ex vivo pig liver and human normal, fatty and cirrhotic liver by measuring the elasticity, shear wave speed, ultrasound attenuation, CT-scan density, MRI signal intensity and fracture force. We assessed the results of the testing performed, as well as the optical appearance on ultrasound, CT and MRI, in order to find the best recipe for gelatin-based phantoms for image-guided procedure training. Results: After the assessment of all phantom recipes, we selected as the best recipe for transparent phantoms one with 14 g of gelatin/100 mL water and for opaque phantom, the recipes with 25% cream. Conclusions: These liver gelatin-based phantom recipes are an inexpensive, reproducible and accessible alternative for training in image-guided and diagnostic procedures and will meet most requirements for valuable training.

A deep-learning-based scatter correction with water equivalent path length map for digital radiography.

We proposed a new deep learning (DL) model for accurate scatter correction in digital radiography. The proposed network featured a pixel-wise water equivalent path length (WEPL) map of subjects with diverse sizes and 3D inner structures. The proposed U-Net model comprises two concatenated modules: one for generating a WEPL map and the other for predicting scatter using the WEPL map as auxiliary information. First, 3D CT images were used as numerical phantoms for training and validation, generating observed and scattered images by Monte Carlo simulation, and WEPL maps using Siddon's algorithm. Then, we optimised the model without overfitting. Next, we validated the proposed model's performance by comparing it with other DL models. The proposed model obtained scatter-corrected images with a peak signal-to-noise ratio of 44.24 ± 2.89dB and a structural similarity index measure of 0.9987 ± 0.0004, which were higher than other DL models. Finally, scatter fractions (SFs) were compared with other DL models using an actual phantom to confirm practicality. Among DL models, the proposed model showed the smallest deviation from measured SF values. Furthermore, using an actual radiograph containing an acrylic object, the contrast-to-noise ratio (CNR) of the proposed model and the anti-scatter grid were compared. The CNR of the images corrected using the proposed model are 16% and 82% higher than those of the raw and grid-applied images, respectively. The advantage of the proposed method is that no actual radiography system is required for collecting training dataset, as the dataset is created from CT images using Monte Carlo simulation.

Assessment of Surgeons' Stress Levels with Digital Sensors during Robot-Assisted Surgery: An Experimental Study.

Robot-Assisted Minimally Invasive Surgery (RAMIS) marks a paradigm shift in surgical procedures, enhancing precision and ergonomics. Concurrently it introduces complex stress dynamics and ergonomic challenges regarding the human-robot interface and interaction. This study explores the stress-related aspects of RAMIS, using the da Vinci XI Surgical System and the Sea Spikes model as a standard skill training phantom to establish a link between technological advancement and human factors in RAMIS environments. By employing different physiological and kinematic sensors for heart rate variability, hand movement tracking, and posture analysis, this research aims to develop a framework for quantifying the stress and ergonomic loads applied to surgeons. Preliminary findings reveal significant correlations between stress levels and several of the skill-related metrics measured by external sensors or the SURG-TLX questionnaire. Furthermore, early analysis of this preliminary dataset suggests the potential benefits of applying machine learning for surgeon skill classification and stress analysis. This paper presents the initial findings, identified correlations, and the lessons learned from the clinical setup, aiming to lay down the cornerstones for wider studies in the fields of clinical situation awareness and attention computing.

Design and evaluation of an anthropomorphic neck phantom for improved ultrasound diagnostics of thyroid gland tumors.

Thyroid cancer is one of the most common cancers worldwide, with ultrasound-guided biopsy being the method of choice for its early detection. The accuracy of diagnostics directly depends on the qualifications of the ultrasonographers, whose performance can be enhanced through training with phantoms. The aim of this study is to propose a reproducible methodology for designing a neck phantom for ultrasound training and research from widely available materials and to validate its applicability. The phantom was made using polyvinyl chloride mixed with additives to reproduce different levels of brightness on ultrasound screens. 3D printing and casting were used to create the neck model and various structures of the neck, including bones, cartilage, arteries, veins, lymph nodes, thyroid gland, and soft tissues. The small objects, such as tumor and lymph node models, were shaped manually. All the phantom's materials were carefully selected to match the ultrasonic speed and attenuation values of real soft tissues and bones. The thyroid gland contains models of a cancerous and cystic nodule. In the neck, there are models of carotid arteries and jugular veins filled with ultrasound-transparent gel. Additionally, there are replicas of lymph nodes and bone structures such as hyoid bone, thyroid cartilage, trachea, and vertebrae. The resulting phantom covers the entire neck area and has been positively received by practicing ultrasound specialists. The proposed manufacturing technology offers a reliable and cost-effective approach to produce an anthropomorphic neck phantom for ultrasound diagnosis of the thyroid gland. The realistic simulation provided by the phantom enhances the quality and accuracy of ultrasound examinations, contributing to better training for medical professionals and improved patient care. Subsequent research efforts can concentrate on refining the fabrication process and exploring additional features to enhance the phantom's capabilities.

Integration of 3D-printed middle ear models and middle ear prostheses in otosurgical training

BackgroundIn otosurgical training, cadaveric temporal bones are primarily used to provide a realistic tactile experience. However, using cadaveric temporal bones is challenging due to their limited availability, high cost, and potential for infection. Utilizing current three-dimensional (3D) technologies could overcome the limitations associated with cadaveric bones. This study focused on how a 3D-printed middle ear model can be used in otosurgical training.MethodsA cadaveric temporal bone was imaged using microcomputed tomography (micro-CT) to generate a 3D model of the middle ear. The final model was printed from transparent photopolymers using a laser-based 3D printer (vat photopolymerization), yielding a 3D-printed phantom of the external ear canal and middle ear. The feasibility of this phantom for otosurgical training was evaluated through an ossiculoplasty simulation involving ten otosurgeons and ten otolaryngology–head and neck surgery (ORL-HNS) residents. The participants were tasked with drilling, scooping, and placing a 3D-printed partial ossicular replacement prosthesis (PORP). Following the simulation, a questionnaire was used to collect the participants' opinions and feedback.ResultsA transparent photopolymer was deemed suitable for both the middle ear phantom and PORP. The printing procedure was precise, and the anatomical landmarks were recognizable. Based on the evaluations, the phantom had realistic maneuverability, although the haptic feedback during drilling and scooping received some criticism from ORL-HNS residents. Both otosurgeons and ORL-HNS residents were optimistic about the application of these 3D-printed models as training tools.ConclusionsThe 3D-printed middle ear phantom and PORP used in this study can be used for low-threshold training in the future. The integration of 3D-printed models in conventional otosurgical training holds significant promise.

Acoustic velocity and stability of tissue-mimicking echogenic materials for ultrasound training phantoms

Purpose. High-fidelity mannequins are increasingly used to train the medical staff on many medical procedures. Lately, a new challenge regarding echogenic materials to build ultrasound-responding phantoms has emerged. The challenge is to find materials with a suitable combination of ultrasound velocity and consistency to the touch. Methods. Bibliographic research was performed to identify materials with promising stiffness, shape retention, and ultrasound velocity combinations. As-standardized-as-possible specimens were realized and tested using an A-mode ultrasound machine to evaluate the US velocity through them. Four differently doped silicones, five gelatin-based materials, five synthetic gelatins, and a 3D printable resin were included in the study. After being tested, the materials were monitored for 12 days to assess their durability and shape retention and tested again to evaluate the ultrasound velocity’s stability. In the paper, the results of the characterization and follow-up of the materials are presented. Results. Outcomes show that gelatins are exceptional soft tissue-mimicking materials in terms of ultrasound velocity and consistency to the touch, but are poor in terms of overtime stability and therefore suitable for disposable short-term phantoms only. Doped silicones present lower ultrasound velocity compared to the reference value of 1540 m/s found in the literature, but excellent overtime stability, and shape retention properties. Values close to biological ones were also given by the Elastic 50A and by polyvinyl chloride plastisol. Conclusion. The paper gives a quantitative overview of the fidelity of both already-in-use and non-conventional materials, focusing on the ultrasound velocity value through them and their longevity in terms of macroscopically observed dehydration, shape retention, and bacterial onset.

A feasibility study of a handmade ultrasound-guided phantom for paracentesis

BackgroundSimulation-based training is effective for ultrasound (US)-guided procedures. However, commercially developed simulators are costly. This study aims to evaluate the feasibility of a hand-made phantom for US-guided paracentesis.MethodsWe described the recipe to prepare an agar phantom. We collected the US performance data of 50 novices, including 22 postgraduate-year (PGY) residents and 28 undergraduate-year (UGY) students, who used the phantom for training, as well as 12 emergency residents with prior US-guided experience. We obtained the feedback after using the phantom with the Likert 5-point scale. The data were presented with medians and interquartile ranges (IQRs) and analyzed by the Wilcoxon rank sum test.ResultsWhile emergency residents demonstrated superior performance compared to trainees, all trainees exhibited acceptable proficiency (global rating of ≥ 3, 50/50 vs. 12/12, p = 1.000) and comparable needle steadiness [5 (5) vs. 5 (5), p = 0.223]. No significant difference in performance was observed between PGYs [5 (4–5)] and UGYs [5 (4–5), p = 0.825]. No significant differences were observed in terms of image stimulation, puncture texture, needle visualization, drainage simulation, and endurance of the phantom between emergency residents and trainees. However, experienced residents rated puncture texture and draining fluid as “neutral” (3/5 on the Likert scale). The cost of the paracentesis phantom is US$16.00 for at least 30 simulations, reducing it to US$6.00 without a container.ConclusionsThe paracentesis phantom proves to be a practical and cost-effective training tool. It enables novices to acquire paracentesis skills, enhances their US proficiency, and boosts their confidence. Nevertheless, further investigation is needed to assess its long-term impact on clinical performance in real patients.Trial registrationNCT04792203 at the ClinicalTrials.gov.

Do-It-Yourself Ultrasonography Phantom Model for Improving Hand Skills: A Technical Report.

This technical report focuses on developing a do-it-yourself (DIY) model of a water phantom for training in ultrasound-guided needle insertion techniques. Ultrasound technology is becoming more widely used in perioperative and intensive care settings. However, accurate needle placement using ultrasound guidance necessitates strong spatial reasoning and hand-eye coordination. To address this, the authors experimented with a water phantom model that is cost-effective, easily accessible, and efficient for training. The DIY water phantom was made using materials such as an examination glove, a used vial rubber cap, water, adhesive tape, sealing glue, and a target object. This technical report discusses the process of assembling the water phantom and the potential benefits it offers for ultrasound training.

Development, evaluation, and overview of standardized training phantoms for abdominal ultrasound-guided interventions.

Ultrasound (US) represents the primary approach for abdominal diagnosis and is regularly used to guide diagnostic and therapeutic interventions (INVUS). Due to possible serious INVUS complications, structured training concepts are required. Phantoms can facilitate teaching, but their use is currently restricted by complex manufacturing and short durability of the materials. Hence, the aim of this study was the development and evaluation of an optimized abdominal INVUS phantom. Phantom requirements were defined in a structured research process: Skin-like surface texture, homogeneous matrix with realistic tissue properties, implementation of lesions and abscess cavities in different sizes and depths as well as a modular production process allowing for customized layouts. The phantom prototypes were evaluated in certified ultrasound courses. In accordance with the defined specifications, a new type of matrix was developed and cast in multiple layers including different target materials. The phantom structure is based on features of liver anatomy and includes solid focal lesions, vessels, and abscess formations. For a realistic biopsy procedure, ultrasound-proof material was additionally included to imitate bone. The evaluation was performed by US novices (n=40) and experienced participants (n=41). The majority (73/81) confirmed realistic visualization of the lesions. The 3D impression was rated as "very good" in 64% of cases (52/81) and good in 31% (25/81). Overall, 86% (70/81) of the participants certified high clinical relevance of the phantom. The presented INVUS phantom concept allows standardized and realistic training for interventions.

Building Affordable, Durable, Medium-fidelity Ballistic Gel Phantoms for Ultrasound-guided Nerve Block Training.

Ultrasound phantoms - alternatives to live human tissue - give learners the opportunity to practice ultrasound-guided regional anesthesia without introducing undue risk to patients. Gelatin-based phantoms provide educators with durable and reusable task trainers; however, commercially available gel-based phantoms are expensive. Here, we investigate the production of durable, low-cost, ballistic gel-based ultrasound phantoms for median, femoral, suprainguinal fascia iliaca plane, and serratus anterior plane nerve blocks, as well as a methodology for producing a phantom for any ultrasound-guided nerve block procedure. Computer-aided design (CAD) software was utilized to design four phantoms replicating the anatomy of median, femoral, suprainguinal fascia iliaca plane, and serratus anterior plane nerve blocks, including relevant landmarks and tissue planes. Plastic models of the desired tissue planes were 3D printed and used to create silicone molds. Ballistic gel was melted and mixed with flour and dye to create a liquid, echogenic ballistic gel, which was poured into the silicone molds. Vessels were simulated by creating negative space in the ballistic gel using metal rods. Nerves were simulated using yarn submerged in ultrasound gel. Simulated bones were designed using CAD and 3D printed. Ballistic gel is a versatile, durable medium that can be used to simulate a variety of tissues and can be melted and molded into any shape. Under ultrasound, these phantoms provide realistic tissue planes that represent the borders between different layers of skin, muscle, and fascia. The echogenicity of the muscle tissue layers, nerves, vessels, and bones is realistic, and bones have significant posterior shadowing as would be observed in a human subject. These phantoms cost $200 each for the first phantom and $60 for each subsequent phantom. These phantoms require some technical skill to design, but they can be built for just 4% of the cost of their commercial counterparts.