Peroxisomal Protein Import Machinery Research Articles

Peroxisome biogenesis initiated by protein phase separation.

Peroxisomes are organelles that carry out β-oxidation of fatty acids and amino acids. Both rare and prevalent diseases are caused by their dysfunction1. Among disease-causing variant genes are those required for protein transport into peroxisomes. The peroxisomal protein import machinery, whichalso shares similarities with chloroplasts2, is unique in transporting folded and large, up to 10 nm in diameter, protein complexes into peroxisomes3. Current models postulate a large pore formed by transmembrane proteins4; however, so far, no pore structure has been observed. In the budding yeast Saccharomyces cerevisiae, the minimum transport machinery includes the membrane proteins Pex13 and Pex14 and the cargo-protein-binding transport receptor, Pex5. Here we show that Pex13 undergoes liquid-liquid phase separation (LLPS) with Pex5-cargo. Intrinsically disordered regions in Pex13 and Pex5 resemble those found in nuclear pore complex proteins. Peroxisomal protein import depends on both the number and pattern of aromatic residues in these intrinsically disordered regions, consistent with their roles as 'stickers' in associative polymer models of LLPS5,6. Finally, imaging fluorescence cross-correlation spectroscopy shows that cargo import correlates with transient focusing of GFP-Pex13andGFP-Pex14 on the peroxisome membrane. Pex13 and Pex14 form foci in distinct time frames, suggesting that they may form channels at different saturating concentrations of Pex5-cargo. Our findings lead us to suggest a model in which LLPS of Pex5-cargo with Pex13andPex14 results in transient protein transport channels7.

Utilization of Nonstop mRNA to Assess Ribosome-Associated Nascent Polypeptide Chains in Early Topogenesis of Peroxisomal Proteins.

The translation of mRNAs lacking a stop codon results in a nascent polypeptide chain still attached to the translating ribosome. When containing an exposed N-terminal targeting signal, these so-called nonstop (ns) proteins have been shown to localize to their respective organellar translocation channel, resulting in stabilized translocation intermediates. Utilizing a plasmid encoding a FLAG-tagged nonstop protein with an N-terminal targeting signal early-stage ribosome-associated protein complexes can be purified by affinity chromatography. This will be exemplified by purification of protein complexes of the peroxisomal protein import machinery using different nonstop variants of the PTS2 cargo protein Fox3p from both soluble and membrane fractions.

Dynamics of the translocation pore of the human peroxisomal protein import machinery.

Peroxisomal matrix proteins are synthesized on cytosolic ribosomes and imported in a posttranslational manner. Intricate protein import machineries have evolved that catalyze the different stages of translocation. In humans, PEX5L was found to be an essential component of the peroxisomal translocon. PEX5L is the main receptor forsubstrate proteins carrying a peroxisomal targeting signal (PTS). Substrates are bound by soluble PEX5L in the cytosol after which the cargo-receptor complex is recruited to peroxisomal membranes. Here, PEX5L interacts with the docking protein PEX14 and becomes part of an integral membrane protein complex that facilitates substrate translocation into the peroxisomal lumen in a still unknown process. In this study, we show that PEX5L containing complexes purified from human peroxisomal membranes constitute water-filled pores when reconstituted into planar-lipid membranes. Channel characteristics were highly dynamic in terms of conductance states, selectivity and voltage- and substrate-sensitivity. Our results show that a PEX5L associated pore exists in human peroxisomes, which can be activated by receptor-cargo complexes.

A Mechanistic Perspective on PEX1 and PEX6, Two AAA+ Proteins of the Peroxisomal Protein Import Machinery.

In contrast to many protein translocases that use ATP or GTP hydrolysis as the driving force to transport proteins across biological membranes, the peroxisomal matrix protein import machinery relies on a regulated self-assembly mechanism for this purpose and uses ATP hydrolysis only to reset its components. The ATP-dependent protein complex in charge of resetting this machinery—the Receptor Export Module (REM)—comprises two members of the “ATPases Associated with diverse cellular Activities” (AAA+) family, PEX1 and PEX6, and a membrane protein that anchors the ATPases to the organelle membrane. In recent years, a large amount of data on the structure/function of the REM complex has become available. Here, we discuss the main findings and their mechanistic implications.

Current Advances in Protein Import into Peroxisomes.

Blobel and coworkers discovered in 1978 that peroxisomal proteins are synthesized on free ribosomes in the cytosol and thus provided the grounds for the conception of peroxisomes as self-containing organelles. Peroxisomes are highly adaptive and versatile organelles carrying out a wide variety of metabolic functions. A striking feature of the peroxisomal import machinery is that proteins can traverse the peroxisomal membrane in a folded and even oligomeric state via cycling receptors. We outline essential steps of peroxisomal matrix protein import, from targeting of the proteins to the peroxisomal membrane, their translocation via transient pores and export of the corresponding cycling import receptors with emphasis on the situation in yeast. Peroxisomes can contribute to the adaptation of cells to different environmental conditions. This is realized by changes in metabolic functions and thus the enzyme composition of the organelles is adoptedaccording to the cellular needs. In recent years, it turned out that this organellar diversity is based on an elaborate regulation of gene expression and peroxisomal protein import. The latter is in the focus of this review that summarizes our knowledge on the composition and function of the peroxisomal protein import machinery with emphasis on novel alternative protein import pathways.

Membrane topologies of PEX13 and PEX14 provide new insights on the mechanism of protein import into peroxisomes.

PEX13 and PEX14 are two core components of the so-called peroxisomal docking/translocation module, the transmembrane hydrophilic channel through which newly synthesized peroxisomal proteins are translocated into the organelle matrix. The two proteins interact with each other and with PEX5, the peroxisomal matrix protein shuttling receptor, through relatively well characterized domains. However, the topologies of these membrane proteins are still poorly defined. Here, we subjected proteoliposomes containing PEX13 or PEX14 and purified rat liver peroxisomes to protease-protection assays and analyzed the protected protein fragments by mass spectrometry, Edman degradation and western blotting using antibodies directed to specific domains of the proteins. Our results indicate that PEX14 is a bona fide intrinsic membrane protein with a Nin -Cout topology, and that PEX13 adopts a Nout -Cin topology, thus exposing its carboxy-terminal Src homology 3 [SH3] domain into the organelle matrix. These results reconcile several enigmatic findings previously reported on PEX13 and PEX14 and provide new insights into the organization of the peroxisomal protein import machinery. ENZYMES: Trypsin, EC3.4.21.4; Proteinase K, EC3.4.21.64; Tobacco etch virus protease, EC3.4.22.44.

A cell-free organelle-based in vitro system for studying the peroxisomal protein import machinery.

Here we describe a protocol to dissect the peroxisomal matrix protein import pathway using a cell-free in vitro system. The system relies on a postnuclear supernatant (PNS), which is prepared from rat/mouse liver, to act as a source of peroxisomes and cytosolic components. A typical in vitro assay comprises the following steps: (i) incubation of the PNS with an in vitro-synthesized 35S-labeled reporter protein; (ii) treatment of the organelle suspension with a protease that degrades reporter proteins that have not associated with peroxisomes; and (iii) SDS-PAGE/autoradiography analysis. To study transport of proteins into peroxisomes, it is possible to use organelle-resident proteins that contain a peroxisomal targeting signal (PTS) as reporters in the assay. In addition, a receptor (PEX5L/S or PEX5L.PEX7) can be used to report the dynamics of shuttling proteins that mediate the import process. Thus, different but complementary perspectives on the mechanism of this pathway can be obtained. We also describe strategies to fortify the system with recombinant proteins to increase import yields and block specific parts of the machinery at a number of steps. The system recapitulates all the steps of the pathway, including mono-ubiquitination of PEX5L/S at the peroxisome membrane and its ATP-dependent export back into the cytosol by PEX1/PEX6. An in vitro import(/export) experiment can be completed in 24 h.

Pex17p-dependent assembly of Pex14p/Dyn2p-subcomplexes of the peroxisomal protein import machinery

Peroxisomal matrix protein import is facilitated by cycling receptors that recognize their cargo proteins in the cytosol by peroxisomal targeting sequences (PTS). In the following, the assembled receptor-cargo complex is targeted to the peroxisomal membrane where it docks to the docking-complex as part of the peroxisomal translocation machinery. The docking-complex is composed of Pex13p, Pex14p and in yeast also Pex17p, whose function is still elusive. In order to characterize the function of Pex17p, we compared the composition and size of peroxisomal receptor-docking complexes from wild-type and pex17Δ cells. Our data demonstrate that the deficiency of Pex17p affects the stoichiometry of the constituents of an isolated 600kDa complex and that pex17Δ cells lack a high molecular weight complex (>900kDa) of unknown function. We identified the dynein light chain protein Dyn2p as an additional core component of the Pex14p/Pex17p-complex. Both, Pex14p and Pex17p interact directly with Dyn2p, but in vivo, Pex17p turned out to be prerequisite for an association of Dyn2p with Pex14p. Finally, like pex17Δ also dyn2Δ cells lack the high molecular weight complex. As dyn2Δ cells also display reduced peroxisomal function, our data indicate that Dyn2p-dependent formation of the high molecular weight Pex14p-complex is required to maintain peroxisomal function on wild-type level.

Covalent Label Transfer between Peroxisomal Importomer Components Reveals Export-driven Import Interactions

Peroxisomes are vital metabolic organelles found in almost all eukaryotic organisms, and they rely exclusively on import of their matrix protein content from the cytosol. In vitro import of proteins into isolated peroxisomal fractions has provided a wealth of knowledge on the import process. However, the common method of protease protection garnered no information on the import of an N-terminally truncated PEX5 (PEX5C) receptor construct or peroxisomal malate dehydrogenase 1 (pMDH1) cargo protein into sunflower peroxisomes because of high degrees of protease susceptibility or resistance, respectively. Here we present a means for analysis of in vitro import through a covalent biotin label transfer and employ this method to the import of PEX5C. Label transfer demonstrates that the PEX5C construct is monomeric under the conditions of the import assay. This technique was capable of identifying the PEX5-PEX14 interaction as the first interaction of the import process through competition experiments. Labeling of the peroxisomal protein import machinery by PEX5C demonstrated that this interaction was independent of added cargo protein, and, strikingly, the interaction between PEX5C and the import machinery was shown to be ATP-dependent. These important mechanistic insights highlight the power of label transfer in studying interactions, rather than proteins, of interest and demonstrate that this technique should be applied to future studies of peroxisomal in vitro import.

The PEX7-Mediated Peroxisomal Import System Is Required for Fungal Development and Pathogenicity in Magnaporthe oryzae

In eukaryotes, microbodies called peroxisomes play important roles in cellular activities during the life cycle. Previous studies indicate that peroxisomal functions are important for plant infection in many phytopathogenic fungi, but detailed relationships between fungal pathogenicity and peroxisomal function still remain unclear. Here we report the importance of peroxisomal protein import through PTS2 (Peroxisomal Targeting Signal 2) in fungal development and pathogenicity of Magnaporthe oryzae. Using an Agrobacterium tumefaciens-mediated transformation library, a pathogenicity-defective mutant was isolated from M. oryzae and identified as a T-DNA insert in the PTS2 receptor gene, MoPEX7. Gene disruption of MoPEX7 abolished peroxisomal localization of a thiolase (MoTHL1) containing PTS2, supporting its role in the peroxisomal protein import machinery. ΔMopex7 showed significantly reduced mycelial growth on media containing short-chain fatty acids as a sole carbon source. ΔMopex7 produced fewer conidiophores and conidia, but conidial germination was normal. Conidia of ΔMopex7 were able to develop appressoria, but failed to cause disease in plant cells, except after wound inoculation. Appressoria formed by ΔMopex7 showed a defect in turgor generation due to a delay in lipid degradation and increased cell wall porosity during maturation. Taken together, our results suggest that the MoPEX7-mediated peroxisomal matrix protein import system is required for fungal development and pathogenicity M. oryzae.

A Monoclonal Antibody for in vivo Detection of Peroxisome-associated PTS1 Receptor

PEX5 is a key protein of the peroxisomal protein import machinery. This cycling receptor binds newly synthesized proteins with a peroxisomal targeting signal type 1 in the cytosol and directs them to the peroxisomal membrane. There, PEX5, together with its docking protein, forms a transient membrane-spanning channel that enables cargo-transport across the membrane. Through interaction with other multimeric membrane complexes, the receptor is released from the membrane back to the cytosol. Very little is known about the various conformational states of the receptor during its cycling. Here we report the generation and characterization of a mouse monoclonal antibody that recognizes in vivo primarily the membrane-associated form of the human PTS1 receptor.

Targeting of Pex8p to the peroxisomal importomer

Pex8p of Saccharomyces cerevisiae is located at the inner surface of the peroxisomal membrane and is essential for the assembly of the importomer, a multi-protein complex of the peroxisomal protein import machinery. By means of the yeast two-hybrid system as well as in vitro binding studies, we demonstrate that Pex8p is capable to interact with the PTS2-receptor Pex7p and the docking complex component Pex13p with its C-terminal SH3-domain providing the binding site. Analysis of the importomer composition of pex-mutants revealed that both PTS-receptors as well as the auxiliary proteins Pex18p and Pex21p are neither required for Pex8p association with the importomer nor for its function as an organizer of the peroxisomal protein import machinery.

The peroxisomal importomer constitutes a large and highly dynamic pore

The peroxisomal protein import machinery differs fundamentally from known translocons (endoplasmic reticulum, mitochondria, chloroplasts, bacteria) as it allows membrane passage of folded, even oligomerized proteins. However, the mechanistic principles of protein translocation across the peroxisomal membrane remain unknown. There are various models that consider membrane invagination events, vesicle fusion or the existence of large import pores. Current data show that a proteinaceous peroxisomal importomer enables docking of the cytosolic cargo-loaded receptors, cargo translocation and receptor recycling. Remarkably, the cycling import receptor Pex5p changes its topology from a soluble cytosolic form to an integral membrane-bound form. According to the transient pore hypothesis, the membrane-bound receptor is proposed to form the core component of the peroxisomal import pore. Here, we demonstrate that the membrane-associated import receptor Pex5p together with its docking partner Pex14p forms a gated ion-conducting channel which can be opened to a diameter of about 9 nm by the cytosolic receptor-cargo complex. The newly identified pore shows striking dynamics, as expected for an import machinery translocating proteins of variable sizes.

Properties of the Ubiquitin-Pex5p Thiol Ester Conjugate

Pex5p, the peroxisomal protein cycling receptor, binds newly synthesized peroxisomal matrix proteins in the cytosol and promotes their translocation across the organelle membrane. During its transient passage through the membrane, Pex5p is monoubiquitinated at a conserved cysteine residue, a requisite for its subsequent ATP-dependent export back into the cytosol. Here we describe the properties of the soluble and membrane-bound monoubiquitinated Pex5p species (Ub-Pex5p). Our data suggest that 1) Ub-Pex5p is deubiquitinated by a combination of context-dependent enzymatic and nonenzymatic mechanisms; 2) soluble Ub-Pex5p retains the capacity to interact with the peroxisomal import machinery in a cargo-dependent manner; and 3) substitution of the conserved cysteine residue of Pex5p by a lysine results in a quite functional protein both in vitro and in vivo. Additionally, we show that MG132, a proteasome inhibitor, blocks the import of a peroxisomal reporter protein in vivo.

Crystal structure of the conserved N-terminal domain of the peroxisomal matrix protein import receptor, Pex14p

Pex14p is a central component of the peroxisomal protein import machinery, in which the conserved N-terminal domain mediates dynamic interactions with other peroxins including Pex5p, Pex13p, and Pex19p. Here, we report the crystal structure of the conserved N-terminal domain of Pex14p with a three-helix bundle. A hydrophobic surface is composed of the conserved residues, of which two phenylalanine residues (Phe-35 and Phe-52) protrude to the solvent. Consequently, two putative binding pockets suitable for recognizing the helical WXXXF/Y motif of Pex5p are formed on the surface by the two phenylalanine residues accompanying with positively charged residues. The structural feature agrees well with our earlier findings where F35A/L36A and F52A/L53A mutants were impaired in the interactions with other peroxins such as Pex5p and Pex13p. Pex14p variants each with Phe-to-Ala mutation at positions 35, 52, and 35/52, respectively, were defective in restoring the impaired peroxisomal protein import in pex14 Chinese hamster ovary mutant ZP161 cells. Moreover, in GST pull-down assays His(6)-Pex5pL bound only to GST-Pex14p(25-70), not to any of GST-Pex14p(25-70)F35A, GST-Pex14p(25-70)F52A, and GST-Pex14p(25-70)F35A/F52A. Endogenous Pex5p was recruited to FLAG-Pex14p on peroxisomes in vivo but barely to FLAG-Pex14pF35A, FLAG-Pex14pF52A, and FLAG-Pex14pF35A/F52A. Collectively, Phe-35 and Phe-52 are essential for the Pex14p functions, including the interaction between Pex14p and Pex5p.

The peroxisomal protein import machinery--a case report of transient ubiquitination with a new flavor.

The peroxisomal protein import machinery displays remarkable properties. Be it its capacity to accept already folded proteins as substrates, its complex architecture or its energetics, almost every aspect of this machinery seems unique. The list of unusual properties is still growing as shown by the recent finding that one of its central components, Pex5p, is transiently monoubiquitinated at a cysteine residue. However, the data gathered in recent years also suggest that the peroxisomal import machinery is not that exclusive and similarities with p97/Cdc48-mediated processes and with multisubunit RING-E3 ligases are starting to emerge. Here, we discuss these data trying to distill the principles by which this complex machinery operates.

Pex19p-dependent Targeting of Pex17p, a Peripheral Component of the Peroxisomal Protein Import Machinery

Pex19p is required for the topogenesis of peroxisomal membrane proteins (PMPs). Here we have demonstrated that Pex19p is also required for the peroxisomal targeting and stability of Pex17p, a peripheral component of the docking complex of the peroxisomal protein import machinery. We have demonstrated that Pex17p is associated with the peroxisomal Pex13p-Pex14p complex as well as with Pex19p. We have identified the corresponding binding sites for Pex14p and Pex19p and demonstrated that a specific loss of the Pex19p interaction resulted in mistargeting of Pex17p. We have shown that a construct consisting only of the Pex19p- and Pex14p-binding sites of Pex17p is sufficient to direct an otherwise cytosolic reporter protein to the peroxisomal membrane in a Pex19p-dependent manner. Our data show that the function of Pex19p as chaperone or import receptor is not restricted to integral membrane proteins but may also include peripheral PMPs. As a consequence of our data, the previous definition of a targeting signal for PMPs (mPTS) as a Pex19p-binding motif in conjunction with a transmembrane segment should be extended to regions comprising a Pex19p-binding motif and a peroxisomal anchor sequence.

Caudothalamic groove cysts in Zellweger syndrome

The cerebro-hepato-renal syndrome of Zellweger is the most severe peroxisome biogenesis disorder. Zellweger syndrome is caused by a disturbance in the peroxisomal protein import machinery and leads to multiple organ defects and death usually within the first year of life. Here we report a 3-month-old girl with Zellweger syndrome who was found to have cysts in the caudothalamic groove on cranial magnetic resonance imaging.

Ubiquitination of the peroxisomal import receptor Pex5p.

Proteins harbouring a peroxisomal targeting signal of type 1 (PTS1) are recognized by the import receptor Pex5p in the cytosol which directs them to a docking and translocation complex at the peroxisomal membrane. We demonstrate the ubiquitination of Pex5p in cells lacking components of the peroxisomal AAA (ATPases associated with various cellular activities) or Pex4p-Pex22p complexes of the peroxisomal protein import machinery and in cells affected in proteasomal degradation. In cells lacking components of the Pex4p-Pex22p complex, mono-ubiquitinated Pex5p represents the major modification, while in cells lacking components of the AAA complex polyubiquitinated forms are most prominent. Ubiquitination of Pex5p is shown to take place exclusively at the peroxisomal membrane after the docking step, and requires the presence of the RING-finger peroxin Pex10p. Mono- and poly-ubiquitination are demonstrated to depend on the ubiquitin-conjugating enzyme Ubc4p, suggesting that the ubiquitinated forms of Pex5p are targeted for proteasomal degradation. Accumulation of ubiquitinated Pex5p in proteasomal mutants demonstrates that the ubiquitination of Pex5p also takes place in strains which are not affected in peroxisomal biogenesis, indicating that the ubiquitination of Pex5p represents a genuine stage in the Pex5p receptor cycle.

Functional role of the AAA peroxins in dislocation of the cycling PTS1 receptor back to the cytosol

Peroxisomal import receptors bind their cargo proteins in the cytosol and target them to docking and translocation machinery at the peroxisomal membrane (reviewed in ref. 1). The receptors release the cargo proteins into the peroxisomal lumen and, according to the model of cycling receptors, they are supposed to shuttle back to the cytosol. This shuttling of the receptors has been assigned to peroxins including the AAA peroxins Pex1p and Pex6p, as well as the ubiquitin-conjugating enzyme Pex4p (reviewed in ref. 2). One possible target for Pex4p is the PTS1 receptor Pex5p, which has recently been shown to be ubiquitinated. Pex1p and Pex6p are both cytosolic and membrane-associated AAA ATPases of the peroxisomal protein import machinery, the exact function of which is still unknown. Here we demonstrate that the AAA peroxins mediate the ATP-dependent dislocation of the peroxisomal targeting signal-1 (PTS1) receptor from the peroxisomal membrane to the cytosol.