Permanent Modification Research Articles

The Sociolinguistic Implications of Body Marks in Ngwaland

Africa has a rich culture of body markings, which is an integral part of its society, history and traditions. Body markings were and are both temporary and permanent modifications of the body, which transmit complex messages about identity and social status. In some African communities, body markings were like wearing one’s identity card on the face or having them printed on one’s skin. The study was carried out in Isiala Ngwa in Abia state, where a corpus of about 30 different body marks was documented and 20 participants were interviewed on the types, motivation, cultural significance, ranking, perception of body marks and reasons for the subsequent decline in the use of indigenous body marks in the Ngwa society. The data collection method involved semi-structured interviews, participant observation and formal conversations on the history and use of body marks in the target group. The Semiotic theory of identification was used as the basic framework for the analysis. The research findings reveal that body markings in Ngwaland are sources of traditional medical intervention, aesthetics/beautification, spiritual fortification/protection, identification, preventing death through reincarnation and warding off aggression. The work concludes that the undeniable roles of body marks in Ngwa land cannot be allowed to go into extinction, as the story of the Ngwa people would be incomplete without body marks, which is the window through which political, social and religious organizations in the past were dissected. Thus, a sociolinguistic, anthropological and documentary approach to body markings in Ngwa land is necessary towards the exploration and preservation of traditional communication patterns, identity formation and semiotic values of this aspect of embodiment.

Structural and spectroscopic characterization of N1,N2-diphenylacenapthylene-1,2-diimines and the influence of substituents on the viscosity of alkyl magnesium solutions

Butyl octyl magnesium solutions are important raw materials in various chemical processes but suffer from their high reactivity with even traces of water, protic solvents or oxygen and an increased viscosity in hydrocarbon solution due to the formation of polymeric structures. N1,N2-diphenylacenaphthylene-1,2-diimines (BIANs) have already been identified as potential candidates to reduce the viscosity of alkyl magnesium solutions and this study provides a systematic insight into the dependence of this ability on the position and structures of substituents on the BIAN. Besides the various BIANs, ZnCl2 complexes and hydrogenated derivatives were characterized and tested for their ability to reduce the viscosity. HPLC-high resolution mass spectrometry, MALDI-ToF mass spectrometry, but most important FTIR and NMR experiments under inert conditions have been used to shine light on the interaction of the different BIAN derivatives with alkyl magnesium solutions. Hydrogenated BIANs, especially those with bulky alkyl groups in the ortho position(s) have been identified as the most promising candidates. An additional benefit of the hydrogenated species is that in contrast to BIANs and BIAN-Zn complexes they do not undergo permanent chemical modification and can be reused after extraction.

The rise and future of CRISPR-based approaches for high-throughput genomics.

Clustered regularly interspaced short palindromic repeats (CRISPR) has revolutionized the field of genome editing. To circumvent the permanent modifications made by traditional CRISPR techniques and facilitate the study of both essential and nonessential genes, CRISPR interference (CRISPRi) was developed. This gene-silencing technique employs a deactivated Cas effector protein and a guide RNA to block transcription initiation or elongation. Continuous improvements and a better understanding of the mechanism of CRISPRi have expanded its scope, facilitating genome-wide high-throughput screens to investigate the genetic basis of phenotypes. Additionally, emerging CRISPR-based alternatives have further expanded the possibilities for genetic screening. This review delves into the mechanism of CRISPRi, compares it with other high-throughput gene-perturbation techniques, and highlights its superior capacities for studying complex microbial traits. We also explore the evolution of CRISPRi, emphasizing enhancements that have increased its capabilities, including multiplexing, inducibility, titratability, predictable knockdown efficacy, and adaptability to nonmodel microorganisms. Beyond CRISPRi, we discuss CRISPR activation, RNA-targeting CRISPR systems, and single-nucleotide resolution perturbation techniques for their potential in genome-wide high-throughput screens in microorganisms. Collectively, this review gives a comprehensive overview of the general workflow of a genome-wide CRISPRi screen, with an extensive discussion of strengths and weaknesses, future directions, and potential alternatives.

Morphology Characterization and Refractive Index Analysis of Subsurface Ultrashort‐Pulsed Laser Modifications in ZnS

A parameter study of ultrashort pulse laser‐induced modifications in the bulk of ZnS crystals is reported. Experimental results on these modifications and their dependence on the pulse energy, writing speed, and depth are presented, with an emphasis on cross‐sectional morphology and induced refractive index changes. Localized permanent material modifications have been inscribed in the bulk of the crystal using a laser with a center emission wavelength of 2.09 μm and a pulse duration of ≈4 ps. The morphology strongly depends on the laser and optical focusing parameters, in particular, on the pulse energy and processing speed, with a significant shift in depth dependence for short pulse‐to‐pulse separations. Depending on the applied pulse energy, distortions of the lateral profile of the refractive index changes appear in the form of oscillatory features in the transverse plane relative to the inducing laser beam. The true extent of the modified material is revealed by the alternating lateral profile with largest induced negative refractive index change, Δn, of −3.88 × 10−2 ± 0.18. Such parametric insight is of critical importance for the understanding and optimization of the fabrication process and for realizing compact 3D photonic devices in the bulk of materials in a reproducible manner.

Concepts and Approaches to Reduce or Avoid Protein Corona Formation on Nanoparticles: Challenges and Opportunities.

This review describes the formation of a protein corona (or its absence) on different classes of nanoparticles, its basic principles, and its consequences for nanomedicine. For this purpose, it describes general concepts to control (guide/minimize) the interaction between artificial nanoparticles and plasma proteins to reduce protein corona formation. Thereafter, methods for the qualitative or quantitative determination of protein corona formation are presented, as well as the properties of nanoparticle surfaces, which are relevant for protein corona prevention (or formation). Thereby especially the role of grafting density of hydrophilic polymers on the surface of the nanoparticle is discussed to prevent the formation of a protein corona. In this context also the potential of detergents (surfactants) for a temporary modification as well as grafting-to and grafting-from approaches for a permanent modification of the surface are discussed. The review concludes by highlighting several promising avenues. This includes (i) the use of nanoparticles without protein corona for active targeting, (ii) the use of synthetic nanoparticles without protein corona formation to address the immune system, (iii) the recollection of nanoparticles with a defined protein corona after in vivo application to sample the blood proteome and (iv) further concepts to reduce protein corona formation.

Efficient separation of organic anions in beverages using aminosilane-functionalized capillary electrophoresis with contactless conductivity detection

BackgroundCapillary electrophoresis (CE) has the advantage of rapid anion analysis, when employing a reverse electroosmotic flow (EOF). The conventional CE method utilizes dynamic coatings with surfactants like cetyltrimethylammonium bromide (CTAB) in the run buffer to reverse the EOF. However, this method suffers from very slow equilibration leading to drifting effective migration times of the analyte anions, which adversely affects the identification and quantification of peaks. Permanent coating of the capillary surface may obviate this problem but has been relatively little explored. Thus, permanent capillary surface modification by the covalent binding of 3-aminopropyltriethoxysilane (APTES) was studied as an alternative. ResultsThis study investigates the effect of APTES concentration for surface functionalization on EOF mobility, separation efficiency, and reproducibility of anion separation. The performance data was complemented by X-ray photoelectron spectroscopy (XPS) and contact angle (CA) measurements. The XPS measurements showed that the coverage with APTES was dependent on its concentration in the coating solution. The XPS measurements correlated well with the EOF values determined for the capillaries tested. A standard mixture of 21 anions could be baseline separated within 10 min in the capillaries with lower EOF, but not in the capillary with the highest EOF as the residence time of the analytes was too short in this case. Compared to conventional dynamic coating with CTAB, APTES-functionalized capillaries provide faster equilibration and long-term EOF stability. The application of APTES-functionalized capillaries in analyzing different beverages demonstrates the precision, reliability, and specificity in determining organic anions, providing valuable insights of their compositions. SignificanceAPTES coating on capillaries provides a facile approach to achieve a permanent reversal of the stable EOF to determine anions. The control of the coverage via the concentration of the reagent solution allows the tailoring of the EOF to different needs, a faster EOF for less complex samples where resolution is not challenging, while a lower EOF for higher complex samples where the focus is on separation efficiency. This enhancement in efficiency and sensitivity has been applied to analyzing organic acids in several beverages.

Contrasting sedimentary and long-lasting geochemical imprints of seismic shaking in a small, groundwater-fed lake basin (Klopeiner See, Eastern European Alps)

In slowly deforming tectonic settings (e.g., European Alps), large earthquakes occur too infrequently to be adequately represented in instrumental and historical records. This leads to uncertainties and inaccuracies of seismic hazard estimations. To extend the seismic record, lacustrine paleoseismologists usually resort to the sedimentary archive of large lakes where earthquakes can be recorded as mass-transport deposits and associated turbidites. The imprint of seismic shaking is generally more subtle and poorly understood in small lakes (<2 km2) with small catchments and therefore such sediment-starved basins are often neglected for paleoseismology. However, these basins might harbour additional information about past earthquakes, thus constituting a valuable supplement to other paleoseismic data. Here, we present the 18 ka-long paleoseismic record of Klopeiner See, a small and rather shallow groundwater-fed lake in the Eastern European Alps. Reflection seismic profiles and sediment cores reveal that several large earthquakes led to extensive mass-wasting in early Late-Glacial times when sedimentation rates were very high (~10 mm/yr). In the Early and Middle Holocene, low sedimentation rates (~0.2-0.5 mm/yr) may have decreased the lake´s sensitivity for recording seismic shaking and no imprints were found for paleo-earthquakes inferred from other records in the region. A short succession of turbidites at ca. 3160 cal BP suggests a burst of strong paleoseismic activity. This may have caused permanent modifications of inflowing ground water systems, archived as a permanent shift in the geochemical signal of the sediment. Such a period of enhanced paleoseismic activity was also inferred from the nearby Lake Wörthersee, but it remains unclear whether these represent the same earthquakes or migrating paleoseismicity. This study highlights the unexpected potential and peculiarities of paleoseismology on small ground-water fed lakes.

Naturalistic use of psychedelics does not modulate processing of self-related stimuli (but it might modulate attentional mechanisms): An event-related potentials study.

Classic psychedelics are able to profoundly alter the state of consciousness and lead to acute experiences of ego dissolution - the blurring of the distinction between representations of self and the external world. However, whether repeated use of psychedelics is associated with more prolonged and permanent modifications to the concept of self remains to be investigated. Therefore, we conducted a preregistered, cross-sectional study in which experienced psychedelics users (15 or more lifetime experiences with psychedelics; N = 56) were compared to nonusers (N = 57) in terms of neural reactivity to a Self-name (i.e., each participant's own name) stimulus, which is known to robustly activate a representation of self. Two control stimuli were additionally used: an Other-name stimulus, as a passive control condition in which no reaction was required, and a Target-name stimulus, to which participants provided a manual response and which thus constituted an active control condition. Analysis of the amplitude of the P300 ERP component evoked by the Self- or Target-names revealed no difference between the psychedelics users and nonusers. However, psychedelic users exhibited increased P300 amplitude during perception of Other-names. In addition, in comparison to nonusers, psychedelics users exhibited a smaller increase in P300 amplitude when processing the task-relevant Target-names (in relation to both Self- and Other-names). Therefore, our data suggests that regular naturalistic use of psychedelics may not be related to long-term changes in the representation of self, but it might potentially affect the allocation of attentional resources to task-relevant stimuli.

Body alteration: On the mental function of body modification and body decoration

Decorating the body as well as (semi-)permanent bodily modifications are a longstanding human practice, together with spending a great amount of time and effort on such body alterations. The present article reviews the mental functions of body-altering behavior. The primary aim is to identify and elucidate the predominant mental function underpinning these body alterations. Following several guidelines for reviews, we synthesized the literature, including several categories of body-altering entities from different eras. We argue that there are two crucial commonalities for individuals engaging in body-altering behavior that comprise the mental functions for doing so: aesthetics and group affiliation (dynamics), including the latter’s subfunctions of supporting individuality, resistance, personal narrative, physical endurance, and sexual motivation. Incorporating the existing literature, we find that aesthetic motivation takes precedence over group affiliation, thereby establishing aesthetics as the primary mental function of body-altering behavior; factors substantiating this conclusion are explored in detail within the article.

Breathing Motion Pattern in Cyclists: Role of Inferior against Superior Thorax Compartment.

The thoracoabdominal breathing motion pattern is being considered in sports training because of its contribution, along with other physiological adaptations, to overall performance. We examined whether and how experience with cycling training modifies the thoracoabdominal motion patterns. We utilized optoelectronic plethysmography to monitor ten trained male cyclists and compared them to ten physically active male participants performing breathing maneuvers. Cyclists then participated in a self-paced time trial to explore the similarity between that observed during resting breathing. From the 3D coordinates of 32 markers positioned on each participant's trunk, we calculated the percentage of contribution of the superior thorax, inferior thorax, and abdomen and the correlation coefficient among these compartments. During the rest maneuvers, the cyclists showed a thoracoabdominal motion pattern characterized by an increased role of the inferior thorax relative to the superior thorax (26.69±5.88%, 34.93±5.03%; p=0.002, respectively), in contrast to the control group (26.69±5.88%; 25.71±6.04%, p=0.4, respectively). In addition, the inferior thorax showed higher coordination in phase with the abdomen. Furthermore, the results of the time trial test underscored the same pattern found in cyclists breathing at rest, suggesting that the development of a permanent modification in respiratory mechanics may be associated with cycling practice.

Commercial-Scale Modification of NdFeB Magnets under Laser-Assisted Conditions.

Rare Earth elements (REE) such as NdFeB are commonly used to produce permanent magnets. Thanks to their superior properties, these materials are highly desirable for green energy applications such as wind power generators or electric cars. Currently, REEs are critical for the ongoing development of eco-friendly solutions in different industrial branches. The emerging issue of REE depletion has led to a need for new methods to enable the life cycle elongation, resistance to wear, and external factors improvement of NdFeB magnets. This can be achieved by advanced, nanostructured coating formation of magnet surfaces to increase their functionality and protect from humidity, pressure, temperature, and other factors. The aim of the following research was to develop a new, scalable strategy for the modification of NdFeB magnets using laser-assisted technique, also known as Laser cladding. For this purpose, four different micropowders were used to modify commercial NdFeB samples. The products were investigated for their morphology, structure, chemical composition, and crystallography. Moreover, magnetic flux density was evaluated. Our results showed that laser cladding constitutes a promising strategy for REE-based permanent magnets modification and regeneration and may help to improve durability and resistance of NdFeB components.

Body Modification on Viking Age Gotland

In recent years, research has provided evidence for permanent body modification in the Viking Age. Based on the current state of research, we identified around 130 male-gendered individuals from Scandinavia and beyond with dental alterations in form of horizontal furrows, most of them stemming from the Baltic isle of Gotland. We suggest that this custom was used as a sign of identification for a closed group of merchants. In contrast, artificial cranial modifications in the Viking Are so far are only known from three female individuals from Gotland. While both forms of body modification have received wide attention in other cultural contexts, the specific expressions of these customs in Viking Age society still lack systematic investigation with regard to their social implications. Based on the archaeological concept of embodiment and modern communication theories we discuss the perception of modified human bodies as media for the presentation and construction of social identities on Viking Age Gotland.

Immature Status Epilepticus Alters the Temporal Relationship between Hippocampal Interictal Epileptiform Discharges and High-frequency Oscillations

The aim was to investigate the long-term effects of a single episode of immature Status Epilepticus (SE) on the excitability of the septal and temporal hippocampus in vitro, by studying the relationship between interictal-like epileptiform discharges (IEDs) and high-frequency oscillations (HFOs; Ripples, Rs and Fast Ripples, FRs). A pentylenetetrazol-induced Status Epilepticus-(SE)-like generalized seizure was induced at postnatal day 20 in 22 male and female juvenile rats, sacrificed >40 days later to prepare hippocampal slices. Spontaneous IEDs induced by Mg2+-free ACSF were recorded from the CA3 area of temporal (T) or septal (S) slices. Recordings were band-pass filtered off-line revealing Rs and FRs and a series of measurements were conducted, with mean values compared with those obtained from age-matched controls (CTRs). In CTR S (vs T) slices, we recorded longer R & FR durations, a longer HFO-IED temporal overlap, higher FR peak power and more frequent FR initiation preceding IEDs (% events). Post-SE, in T slices all types of events duration (IED, R, FR) and the time lag between their onsets (R-IED, FR-IED, R-FR) increased, while FR/R peak power decreased; in S slices, the IED 1st population spike and the FR amplitudes, the R and FR peak power and the (percent) events where Rs or FRs preceded IEDs all decreased. The CA3 IED-HFO relationship offers insights to the septal-to-temporal synchronization patterns; its post-juvenile-SE changes indicate permanent modifications in the septotemporal excitability gradient. Moreover, these findings are in line to region-specific regulation of various currents post-SE, as reported in literature.

Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity

AbstractThe need for biodegradable materials has driven the exploration of natural and biobased polymers, with cellulose emerging as a promising option due to its abundance and environmental sustainability. However, cellulose lacks inherent antimicrobial activity, prompting researchers to explore various strategies. In this work, the permanent covalent chemical modification of microcrystalline cellulose with 1-methylimidazole is reported to provide cellulose with antimicrobial properties. The modifications were confirmed using solid-state 13C-NMR and Fourier Transform Infrared (FT-IR) spectroscopies. The analysis from 13C-NMR and elemental analysis also confirmed the successful of the chemical modification occurred at C6 after chlorination with an estimated degree of substitution of 17%. The surface charge density of this cellulosic derivative was determined using ζ potential measurements, which confirmed its cationization. The crystalline and thermal properties of the resulting cellulose derivative were evaluated using X-ray diffraction and thermogravimetric analysis (TGA), respectively. Finally, the antimicrobial activity of the obtained cationic cellulose was assessed against both Gram-positive (Staphylococcus epidermidis) and Gram-negative (Pseudomona aeruginosa) bacteria, giving a reduction of > 99.99% and 99.6%, respectively.

Surface Modification of Titanate Nanotubes with a Carboxylic Arm for Further Functionalization Intended to Pharmaceutical Applications.

Nanotechnology is playing a significant role in modern life with tremendous potential and promising results in almost every domain, especially the pharmaceutical one. The impressive performance of nanomaterials is shaping the future of science and revolutionizing the traditional concepts of industry and research. Titanate nanotubes (TNTs) are one of these novel entities that became an appropriate choice to apply in several platforms due to their remarkable properties such as preparation simplicity, high stability, good biocompatibility, affordability and low toxicity. Surface modification of these nanotubes is also promoting their superior characters and contributing more to the enhancement of their performance. In this research work, an attempt was made to functionalize the surface of titanate nanotubes with carboxylic groups to increase their surface reactivity and widen the possibility of bonding different molecules that could not be bonded directly. Three carboxylic acids were investigated (trichloroacetic acid, citric acid and acrylic acid), and the prepared composites were examined using FT-IR and Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The toxicity of these functionalized TNTs was also investigated using adherent cancer cell lines and fibroblasts to determine their safety profile and to draw the basic lines for their intended future application. Based on the experimental results, acrylic acid could be the suitable choice for permanent surface modification with multiple carboxylic groups due to its possibility to be polymerized, thus presenting the opportunity to link additional molecules of interest such as polyethylene glycol (PEG) and/or other molecules at the same time.

Regenerable planting of multifunctional amine: Regeneration-enhanced antifouling/antiscaling properties and performance of thin film composite nanofiltration membrane

The problems of poly(piperazineamide)-based thin film composite (TFC) nanofiltration (NF) membrane are the fouling, scaling and poor separation performance of uncharged organics and heavy metal ions. Permanent surface modification lowers the fouling/scaling problems. However, these problems persist as the separation progresses. We address these issues by the on-demand regenerable planting of polyethyleneimine (PEI) into the polyamide (PA) layer of TFC NF membrane. The regenerable planting is based on the electrostatic interaction among the protonated amine groups of low molecular weight PEI and ionized carboxylic acid groups situated at the relatively inner sites (low dielectric constant) of the PA network. The incorporated PEI chains are stable at the pH range of 3–9. The PEI incorporated membrane exhibits significantly enhanced antifouling/antiscaling property, rejection of heavy metal ions (98–99%) and bisphenol A (BPA, 95%) without much negatively affecting the bivalent anion rejection (Na2SO4, 97.5%) and water permeance (11 L m−2 h−1 bar−1) as compared to the pristine and commercial membranes (55–82%, 50–76% and 98–99% rejections of heavy metal ions, BPA and Na2SO4). Advantageously, PEI chains are removable at pH ≤ 2 or pH ≥ 9.5 without affecting the main PA layer. The multiple removal and re-generation of the membrane have been achieved. The flux recovery of the membrane after antifouling/antiscaling tests significantly improved upon intentional removal and reincorporation of PEI. Inherent properties of the modified membrane channels couple with the on-demand regenerable ability show immense promises of the membrane in the separation applications.

Experimental Study and Phenomenological Laws of Some Nonlinear Behaviours of the Wheel–Rail Contact Associated with the Deshunting Phenomenon

A widely used technique for locating the position of a train during its journey involves electrical detection: on a section of track, the train closes (“shunts”) a circuit dedicated to its location via its wheels and axles. The quality of the wheel–rail contact is therefore particularly important for signalling management and traffic control. In this paper, we show that the current flowing through the track circuit induces a permanent modification and a nonlinear, frequency-dependent behaviour of the electrical contact. We propose an analytical expression that describes the evolution of the measured voltage as a function of current and frequency for these nonlinear behaviours. This behavioural law was obtained using experimental measurements on a real train and could therefore be integrated into a global model describing the track system.

A surface treatment method for improving the attachment of PDMS: acoustofluidics as a case study

A method for a permanent surface modification of polydimethylsiloxane (PDMS) is presented. A case study on the attachment of PDMS and the lithium niobate (LiNbO3) wafer for acoustofluidics applications is presented as well. The method includes a protocol for chemically treating the surface of PDMS to strengthen its bond with the LiNbO3 surface. The PDMS surface is modified using the 3-(trimethoxysilyl) propyl methacrylate (TMSPMA) silane reagent. The effect of silane treatment on the hydrophilicity, morphology, adhesion strength to LiNbO3, and surface energy of PDMS is investigated. The results demonstrated that the silane treatment permanently increases the hydrophilicity of PDMS and significantly alters its morphology. The bonding strength between PDMS and LiNbO3increased with the duration of the silane treatment, reaching a maximum of approximately 500 kPa. To illustrate the effectiveness of this method, an acoustofluidic device was tested, and the device demonstrated very promising enhanced bonding and sealing capabilities with particle manipulation at a flow rate of up to 1 L/h by means of traveling surface acoustic waves (TSAW). The device was reused multiple times with no fluid leakage or detachment issues. The utility of the presented PDMS surface modification method is not limited to acoustofluidics applications; it has the potential to be further investigated for applications in various scientific fields in the future.

The Effect of Electrolytes on the Kinetics of the Hydrogen Evolution Reaction

Amid global energy challenges, the hydrogen evolution reaction (HER) is gaining traction for green hydrogen production. While catalyst research is ongoing, recognizing electrolyte effects remains crucial for sustainable hydrogen production via renewable-powered water electrolysis. This review delves into the intricate effects of electrolytes on the kinetics of the HER. It examines key factors including the pH, cations, anions, impurities, and electrolyte concentration. This review discusses the notion that the electrolyte pH alters catalyst–electrolyte interactions and proton concentrations, thereby influencing factors such as the hydrogen binding energy, water adsorption, and overall reaction kinetics. Moreover, this review provides a briefing on the notion that electrolyte cations such as Li+ can impact the HER positively or negatively, offering opportunities for improvement based on the metal substrate. Interestingly, there is a potential that the HER can be tuned using Li+ ions to modify the M–H bond energy, demonstrating a flexibility beyond the pH levels and counter-ions. The varied adsorption energies of metal cations on metal electrodes are also found to influence the HER kinetics. The effects of electrolyte anions and impurities are also discussed, emphasizing both the positive and negative impacts on HER kinetics. Moreover, it is pointed out that the electrolyte-engineering approach enhances the HER kinetics without permanent catalyst surface modifications. This review underscores the importance of the electrolyte composition, highlighting both the challenges and potential solutions in advancing HER research for sustainable energy production.

Mechanical stress confers nuclear and functional changes in derived leukemia cells from persistent confined migration

Nuclear deformability plays a critical role in cell migration. During this process, the remodeling of internal components of the nucleus has a direct impact on DNA damage and cell behavior; however, how persistent migration promotes nuclear changes leading to phenotypical and functional consequences remains poorly understood. Here, we described that the persistent migration through physical barriers was sufficient to promote permanent modifications in migratory-altered cells. We found that derived cells from confined migration showed changes in lamin B1 localization, cell morphology and transcription. Further analysis confirmed that migratory-altered cells showed functional differences in DNA repair, cell response to chemotherapy and cell migration in vivo homing experiments. Experimental modulation of actin polymerization affected the redistribution of lamin B1, and the basal levels of DNA damage in migratory-altered cells. Finally, since major nuclear changes were present in migratory-altered cells, we applied a multidisciplinary biochemical and biophysical approach to identify that confined conditions promoted a different biomechanical response of the nucleus in migratory-altered cells. Our observations suggest that mechanical compression during persistent cell migration has a role in stable nuclear and genomic alterations that might handle the genetic instability and cellular heterogeneity in aging diseases and cancer.