Performance Of Ultrasonic Transducers Research Articles

A novel coupling method for ultrasonic transducer based on pressureless sintering of nano-Ag

The acoustic performance of ultrasonic transducer is directly determined by the coupling between the piezoelectric unit and the medium. At present, the coupling methods of the transducer are relatively single. In this work, a novel ultrasonic transducer coupling method based on pressureless sintering of nano-Ag is reported. The effects of sintering temperature on the micro-morphology and macro-porosity of nano-Ag sintered bulk (i.e. demoulded coupling layer) are systematically investigated. The transducers are design and fabricated by one-time pressureless sintering of nano-Ag paste. The influences of sintering temperature on acoustic performance of the transducers are analysed by experiments in detail. The results show that the number of the pores in the pressureless sintered bulk decrease with the sintering temperature, while the pores size gradually increase. From the perspective of acoustic impedance matching, silver materials have great advantages and universality as the coupling layer between most piezoelectric wafers and steel mediums. The coupling effect of sintered Ag could be improved by increasing the temperature. The best coupling effect could be obtained by sintering at 350 °C, at which the primary echo of the transducer has ideal waveform and bandwidth.

Broadband ultrasonic transducer based on textured lead-free NKN-based piezoceramics

The performance of ultrasonic transducers in terms of broadband and high sensitivity is crucial for achieving excellent axial resolution and a high signal-to-noise ratio in ultrasonic imaging. These qualities greatly rely on the electromechanical properties of the piezo-materials used. In this work, a potassium sodium niobate (NKN)-based lead-free piezoceramic was fabricated by template grain growth method, resulting in outstanding electromechanical properties (d33 ≈ 710 pC N−1, k33 ≈ 0.88, kt ≈ 0.61, Tc ≈ 244 °C). A 1–3 composite structure was created using this lead-free textured ceramic to fabricate an ultrasonic transducer with a center frequency of 4.18 MHz. The ultrasonic transducer exhibited a remarkable −6 dB bandwidth of up to 140% and an insertion loss of −23.63 dB. Imaging experiments confirmed that the 1–3 NKN-based textured ceramic transducer displayed excellent −6 dB axial resolution. Notably, these performance parameters exceeded those of ultrasonic transducers made with lead-based PZT-5H piezoceramics, demonstrating the significant potential of this lead-free piezoceramic as a replacement for lead-based materials.

3D Printing and processing of miniaturized transducers with near-pristine piezoelectric ceramics for localized cavitation

The performance of ultrasonic transducers is largely determined by the piezoelectric properties and geometries of their active elements. Due to the brittle nature of piezoceramics, existing processing tools for piezoelectric elements only achieve simple geometries, including flat disks, cylinders, cubes and rings. While advances in additive manufacturing give rise to free-form fabrication of piezoceramics, the resultant transducers suffer from high porosity, weak piezoelectric responses, and limited geometrical flexibility. We introduce optimized piezoceramic printing and processing strategies to produce highly responsive piezoelectric microtransducers that operate at ultrasonic frequencies. The 3D printed dense piezoelectric elements achieve high piezoelectric coefficients and complex architectures. The resulting piezoelectric charge constant, d33, and coupling factor, kt, of the 3D printed piezoceramic reach 583 pC/N and 0.57, approaching the properties of pristine ceramics. The integrated printing of transducer packaging materials and 3D printed piezoceramics with microarchitectures create opportunities for miniaturized piezoelectric ultrasound transducers capable of acoustic focusing and localized cavitation within millimeter-sized channels, leading to miniaturized ultrasonic devices that enable a wide range of biomedical applications.

Effects of Composition Segregation in PMN-PT Crystals on Ultrasound Transducer Performance.

This study investigates the relationship between the composition segregation in lead magnesium niobate-lead titanate (PMN-PT; PMN-29%PT, PMN-29.5%PT, PMN-30%PT, PMN-30.5%PT, and PMN-31%PT) single crystals within morphotropic phase boundary (MPB) and the corresponding ultrasonic transducer performance through PiezoCAD modeling and real transducer testing. For five crystals with compositions distributed across the main body of a crystal ingot, the piezoelectric coefficient and free relative permittivity values were measured to vary by over 30%, whereas the transducer bandwidth and center frequency values were modeled to change by less than 10%. For the single-element ultrasonic transducers fabricated using those crystals without matching layers, the variations of -6-dB bandwidth, insertion loss, receiver-free field voltage response, and center frequency were measured to be 9.61%, -15.23%, 9.76%, and 1.41%, respectively, confirming the modeling results. Using the Mason and Krimholtz, Leedom, and Matthaei (KLM) models, it is found that the relatively stable transducer performance can be attributed to the relatively consistent electromechanical coupling coefficient, acoustic impedance, and clamped relative permittivity originated from the stable elastic compliance properties among the crystals of various compositions. It is expected that the relatively stable performance could be extended to multielement transducers with matching layers for the same contributing mechanisms. Our results suggest that it is possible to use crystal plates of different compositions within the MPB region, obtained from one and the same ingot, to fabricate a batch of ultrasonic transducers that will exhibit a similar performance, significantly reducing the cost of materials.

An optimization design strategy of 1–3 piezocomposite ultrasonic transducer for imaging applications

An optimization design strategy based on finite element method (FEM) and particle swarm optimization (PSO) algorithm is developed to fabricate high-performance 1–3 piezocomposite ultrasonic transducer. In this strategy, the structure and performance of ultrasonic transducer are simulated by FEM based PZFlex software to analyze the effect of design parameters (ceramic volume fraction and kerf width) on its performance. Due to the time-consuming of FEM simulation, based on the data obtained by simulations, artificial neural network models are established to describe the mapping relation of the design parameters and performance parameters (center frequency and high electromechanical coupling coefficient). The multi-objective optimization criterion is constructed for ultrasonic transducer, and then the modified PSO algorithm are adopted to optimize design parameters. According to the optimized design parameters, the FEM simulation and experiment are conducted to validate the effectiveness of the developed strategy. The simulation and experiment results are in agreement with the designed performance, which indicates that the developed strategy can be used to optimize design parameters for fabricating high-performance ultrasonic transducer. In addition, the imaging experiments of tungsten wires and RMB coin prove the high imaging performance of the ultrasonic transducer fabricated by the developed strategy.

Wide Bandwidth Class-S Power Amplifiers for Ultrasonic Devices.

Wide bandwidth ultrasonic devices are a necessity in high-resolution ultrasonic systems. Therefore, constant output voltages need to be produced across the wide bandwidths of a power amplifier. We present the first design of a wide bandwidth class-S power amplifier for ultrasonic devices. The −6 dB bandwidth of the developed class-S power amplifier was measured at 125.07% at 20 MHz, thus, offering a wide bandwidth for ultrasonic devices. Pulse-echo measurement is a performance measurement method used to evaluate the performance of ultrasonic transducers, components, or systems. The pulse-echo signals were obtained using an ultrasonic transducer with designed power amplifiers. In the pulse-echo measurements, time and frequency analyses were conducted to evaluate the bandwidth flatness of the power amplifiers. The frequency range of the ultrasonic transducer was measured and compared when using the developed class-S and commercial class-A power amplifiers with the same output voltages. The class-S power amplifiers had a relatively flat bandwidth (109.7 mV at 17 MHz, 112.0 mV at 20 MHz, and 109.5 mV at 23 MHz). When the commercial class-A power amplifier was evaluated under the same conditions, an uneven bandwidth was recorded (110.6 mV at 17 MHz, 111.5 mV at 20 MHz, and 85.0 mV at 23 MHz). Thus, we demonstrated that the designed class-S power amplifiers could prove useful for ultrasonic devices with a wide frequency range.

A High-Tolerance Matching Method Against Load Fluctuation for Ultrasonic Transducers

Fluctuation of acoustic load significantly weakens the performance of ultrasonic system. To address this problem in a simple way, we consider the main input and output variables related to the ultrasonic transducer's performance and propose a detailed mathematical model based on the simplest LC matching network containing only one capacitor and one inductor. In this model, a new resonance frequency ${\boldsymbol{f}_{\bf 0}}$ brought by matching components was found and defined. The optimum analysis method is used to solve the model, and a high-tolerance matching method against load fluctuation is obtained. Analysis indicates that when activated at the mechanical resonance frequency, the impedance and apparent power of the piezoelectric transducer (PT) matched by the proposed method are constant no matter how the load changes, and thereby can significantly increase the stability and robustness of ultrasonic systems. For its simple structure and high performance, the proposed matching method can be widely applied in most ultrasonic systems. The tolerance of the proposed method against other environmental factors and high-order LC matching networks were also discussed. In addition, the feasibility and advantage of the proposed matching method are also verified by experiments.

Fabrication and Characterization of High-Sensitivity Ultrasonic Transducers With Functionally Graded Design

In this paper, a PZT/epoxy piezo-composite transducer with functionally graded design was proposed, which facilitated high sensitivity and broad bandwidth. The functionally graded piezocomposite was fabricated using a modified dice and fill method. Finite-element simulation was performed to study the vibration modes of the piezocomposite and to predict the transducer performances. To evaluate the performances experimentally, the proposed and conventional transducer based on monolithic PZT ceramic with similar dimension was fabricated and characterized systematically. We determined that the functionally graded transducer has a slightly higher center frequency (5.37 MHz), broader −6-dB bandwidth (22.5%), and a much lower insertion loss (−13.57 dB) compared to the conventional transducer (5.26 MHz, 18.3%, and −17.72 dB, respectively). The experimental results are in good agreement with the simulation ones. This preliminary investigation suggests that the functionally graded design is a promising approach to enhance the performance of ultrasonic transducers in high-sensitivity applications.

Effect of temperature on the pulse‐echo performance of ultrasonic transducers fabricated with PVDF film

Empirical data is presented on the pulse-echo performance of poly-vinylidenefluoride (PVDF) ultrasound transducers monitored in-situ at temperatures in the range 50–130°C. Measurements were performed over a 5 h period beginning at the sensors’ initial exposure to temperature. A reduction in pulse-echo amplitude was observed at all temperatures in the range and was found to be proportional to temperature increase. Four different thicknesses of PVDF film were used for the trials and small differences in behaviour were observed between sensors constructed using each thickness. On average, the overall loss was found to increase linearly with temperature from a 16% drop in pk–pk pulse-echo voltage observed at 60°C to a 95% drop in performance at 120°C after 5 h. Rates of signal loss were found to follow a logarithmic decay, particularly at temperatures above 70°C where significant reductions were observed in the initial seconds/minutes following exposure to temperature.

Structure of Pb(Zr,Ti)O3(PZT) for Power Ultrasonic Transducer

To improve the performance of ultrasonic transducer, the samples of PZT were improved by doping. The doped PZT was observed and analyzed from the following aspects: the crystal phase structures, the surface morphologies and the dielectric constant. According to the transducer parameter requirements for ultrasonic machining, there are also requirements for the parameters of piezoelectric ceramics. The high performance PZT was prepared by doping the elements of Ga, Ba, Nb, Sn, and Sr in PZT. The doped PZT is suitable for power ultrasonic machining at 20 kHz through analysis using X-ray diffraction (XPD), a scanning electron microscope (SEM) and LCR meter. Therefore, the excellent performance of transducer for power ultrasonic machining is guaranteed.

Piezoelectric Nanotube Array for Broadband High-Frequency Ultrasonic Transducer.

Piezoelectric materials are vital in determining ultrasonic transducer and imaging performance as they offer the function for conversion between mechanical and electrical energy. Ultrasonic transducers with high-frequency operation suffer from performance degradation and fabrication difficulty of the demanded piezoelectric materials. Hence, we propose 1-D polymeric piezoelectric nanostructure with controlled nanoscale features to overcome the technical limitations of high-frequency ultrasonic transducers. For the first time, we demonstrate the integration of a well-aligned piezoelectric nanotube array to produce a high-frequency ultrasonic transducer with outstanding performance. We find that nanoconfinement-induced polarization orientation and unique nanotube structure lead to significantly improved piezoelectric and ultrasonic transducing performance over the conventional piezoelectric thin film. A large bandwidth, 126% (-6 dB), is achieved at high center frequency, 108 MHz. Transmission sensitivity of nanotube array is found to be 46% higher than that of the monolithic thin film transducer attributed to the improved electromechanical coupling effectiveness and impedance match. We further demonstrate high-resolution scanning, ultrasonic imaging, and photoacoustic imaging using the obtained nanotube array transducers, which is valuable for biomedical imaging applications in the future.

A new topological structure for the Langevin-type ultrasonic transducer

In this paper, a new topological structure for the Langevin-type ultrasonic transducer is proposed and investigated. The two cylindrical terminal blocks are conically shaped with four supporting plates each, and two cooling fins are disposed at the bottom of terminal blocks, adjacent to the piezoelectric rings. Experimental results show that it has larger vibration velocity, lower temperature rise and higher electroacoustic energy efficiency than the conventional Langevin transducer. The reasons for the phenomena can be well explained by the change of mass, heat dissipation surface and force factor of the transducer. The proposed design may effectively improve the performance of ultrasonic transducers, in terms of the working effect, energy consumption and working life.

Application of PMN-32PT Piezoelectric Crystals for Novel Air-coupled Ultrasonic Transducers

Due to very high piezoelectric properties of PMN-PT crystals they may significantly improve performance of air-coupled ultrasonic transducers. For these purpose vibrations of PMN-PT rectangular plates and strips were investigated. An air-coupled ultrasonic transducer and array consisting of 8 single piezoelectric strips were designed. Operation of the transducer was simulated by the finite element method using ANSYS Mechanical APDL Product Launcher software. Spatial distributions of displacements inside piezoelectric elements and matching strip were obtained. Experimental investigations were carried out by the laser Doppler vibrometer Polytec OFV-5000 and the Bruel&Kjaer microphone 4138 with the measurement amplifier NEXUS WH 3219. It was found that performance of the ultrasonic transducer with PMN–32PT crystals was a few times better than of a PZT based ultrasonic transducer.

The Effects of Piezoelectric Ceramic Dissipation Factor on the Performance of Ultrasonic Transducers

The dissipation factor (DF) is an important material property of piezoceramics that governs the amount of self-heating under resonant conditions; it essentially quantifies a particular material type for either an actuator or resonator application: high DF materials with typically higher output (d33) are better for actuators, whereas low DF materials with typically lower d33 are better for resonators. Transducer designers must often compromise between mechanical output and DF in the selection of piezoceramics for power ultrasonic applications, and abnormally high DF is one of the main causes of production stoppages. In theory DF is simply the current/voltage phase deviation from an ideal capacitor at 90° (a.k.a. tan(δ) or dielectric loss). Abnormally high DF is typically caused by moisture absorption due to poor ceramic porosity, which causes voltage leakage effects; e.g., seen in transducer production when setting piezo stack preload. Corresponding large increases in capacitance can also be associated with poor porosity, which is counterintuitive unless there is moisture absorption or electrode wicking. This research investigates the mechanisms for abnormally high DF in peizoceramics, and its corresponding effect on transducer performance. It investigates if DF is only affected by the bulk dielectric properties of the piezoceramics (e.g. porosity), or is also influenced by non-uniform electric field effects from electrode wicking. It explores if higher DF ceramics can affect transducer displacement/current gain stability via moisture expulsion at higher drive levels. The investigation focuses solely on the common PZT8 piezoelectric material used with welding transducers for semiconductor wire bonding. Transducers are built with both normal DF peizoceramics, and those with abnormally high DF ceramics which caused production stoppages. Several metrics are investigated such as impedance, displacement gain and capacitance. The experimental and theoretical research methods include Bode plots, SEM cross-sections, Archimedes method, equivalent circuits, laser vibrometry and finite element analysis.

Nuclear Radiation Tolerance of Single Crystal Aluminum Nitride Ultrasonic Transducer

Ultrasonic technologies offer the potential for high accuracy and resolution in-pile measurement of a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes. Many Department of Energy-Office of Nuclear Energy (DOE-NE) programs are exploring the use of ultrasonic technologies to provide enhanced sensors for in-pile instrumentation during irradiation testing. For example, the ability of small diameter ultrasonic thermometers (UTs) to provide a temperature profile in candidate metallic and oxide fuel would provide much needed data for validating new fuel performance models, (Rempe et al., 2011; Kazys et al., 2005). These efforts are limited by the lack of identified ultrasonic transducer materials capable of long term performance under irradiation test conditions. To address this need, the Pennsylvania State University (PSU) was awarded an Advanced Test Reactor National Scientific User Facility (ATR NSUF) project to evaluate the performance of promising magnetostrictive and piezoelectric transducers in the Massachusetts Institute of Technology Research Reactor (MITR) up to a fast fluence of at least 1021 n/cm2. The irradiation is also supported by a multi-National Laboratory collaboration funded by the Nuclear Energy Enabling Technologies Advanced Sensors and Instrumentation (NEET ASI) program. The results from this irradiation, which started in February 2014, offer the potential to enable the development of novel radiation tolerant ultrasonic sensors for use in Material Testing Reactors (MTRs). As such, this test is an instrumented lead test and real-time transducer performance data is collected along with temperature and neutron and gamma flux data. Hence, results from this irradiation offer the potential to bridge the gap between proven out-of-pile ultrasonic techniques and in-pile deployment of ultrasonic sensors by acquiring the data necessary to demonstrate the performance of ultrasonic transducers. To date, very encouraging results have been attained as several transducers have continued to operate under irradiation. The irradiation is ongoing and will continue to approximately mid-2015.

Effect of Thermal Degradation on High Temperature Ultrasonic Transducer Performance in Small Modular Reactors

Prototype ultrasonic NDT transducers for use in immersion in coolants for small modular reactors have shown low signal to noise ratio. The reasons for the limitations in performance at high temperature are under investigation, and include changes in component properties. This current work seeks to quantify the issue of thermal expansion and degradation of the piezoelectric material in a transducer using a finite element method. The computational model represents an experimental set up for an ultrasonic transducer in a pulse-echo mode immersed in a liquid sodium coolant. Effect on transmitted and received ultrasonic signal due to elevated temperature (∼200oC) has been analysed.

Irradiation Testing of Ultrasonic Transducers

Ultrasonic technologies offer the potential for high accuracy and resolution in-pile measurement of numerous parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes. Many Department of Energy-Office of Nuclear Energy (DOE-NE) programs are exploring the use of ultrasonic technologies to provide enhanced sensors for in-pile instrumentation during irradiation testing. For example, the ability of single, small diameter ultrasonic thermometers (UTs) to provide a temperature profile in candidate metallic and oxide fuel would provide much needed data for validating new fuel performance models. Other efforts include an ultrasonic technique to detect morphology changes (such as crack initiation and growth) and acoustic techniques to evaluate fission gas composition and pressure. These efforts are limited by the lack of existing knowledge of ultrasonic transducer material survivability under irradiation conditions. To address this need, the Pennsylvania State University (PSU) was awarded an Advanced Test Reactor National Scientific User Facility (ATR NSUF) project to evaluate promising magnetostrictive and piezoelectric transducer performance in the Massachusetts Institute of Technology Research Reactor (MITR) up to a fast fluence of at least 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">21</sup> n/cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> (E>0.1 MeV). This test will be an instrumented lead test; and real-time transducer performance data will be collected along with temperature and neutron and gamma flux data. By characterizing magnetostrictive and piezoelectric transducer survivability during irradiation, test results will enable the development of novel radiation tolerant ultrasonic sensors for use in Material and Test Reactors (MTRs). The current work bridges the gap between proven out-of-pile ultrasonic techniques and in-pile deployment of ultrasonic sensors by acquiring the data necessary to demonstrate the performance of ultrasonic transducers.

Novel power MOSFET-based expander for high frequency ultrasound systems

The function of an expander is to obstruct the noise signal transmitted by the pulser so that it does not pass into the transducer or receive electronics, where it can produce undesirable ring-down in an ultrasound imaging application. The most common type is a diode-based expander, which is essentially a simple diode-pair, is widely used in pulse-echo measurements and imaging applications because of its simple architecture. However, diode-based expanders may degrade the performance of ultrasonic transducers and electronic components on the receiving and transmitting sides of the ultrasound systems, respectively. Since they are non-linear devices, they cause excessive signal attenuation and noise at higher frequencies and voltages. In this paper, a new type of expander that utilizes power MOSFET components, which we call a power MOSFET-based expander, is introduced and evaluated for use in high frequency ultrasound imaging systems. The performance of a power MOSFET-based expander was evaluated relative to a diode-based expander by comparing the noise figure (NF), insertion loss (IL), total harmonic distortion (THD), response time (RT), electrical impedance (EI) and dynamic power consumption (DPC). The results showed that the power MOSFET-based expander provided better NF (0.76dB), IL (−0.3dB) and THD (−62.9dB), and faster RT (82ns) than did the diode-based expander (NF (2.6dB), IL (−1.4dB), THD (−56.0dB) and RT (119ns)) at 70MHz. The −6dB bandwidth and the peak-to-peak voltage of the echo signal received by the transducer using the power MOSFET-based expander improved by 17.4% and 240% compared to the diode-based expander, respectively. The new power MOSFET-based expander was shown to yield lower NF, IL and THD, faster RT and lower ring down than the diode-based expander at the expense of higher dynamic power consumption.

Single-element ultrasonic transducer modeling using a hybrid FD–PSTD method

In a recent publication [E. Filoux, S. Callé, D. Certon, M. Lethiecq, F. Levassort, Modeling of piezoelectric transducers with combined pseudospectral and finite-difference methods, J. Acoust. Soc. Am. 123 (6) (2008) 4165–4173], a new finite-difference/pseudospectral time-domain (FD–PSTD) algorithm was presented and used to model the generation of acoustic waves by a piezoelectric resonator and their propagation in the structure and the surrounding water. In this paper, the model has been extended to simulate the two-dimensional behaviour of a complete single-element transducer, composed of the resonator, a backing and a front matching layer. This further version of the model takes into account the mechanical loss in materials, and enables the calculation of electrical impedance, which is a characteristic of high interest to optimize the performance of ultrasonic transducers. The impedance curves of a PZT [URL: http://www.ferroperm-piezo.com (last viewed 04/2008); B. Jaffe, R.S. Roth, S. Marzullo, Piezoelectric properties of lead zirconate-lead titanate solid-solution ceramics, J. Appl. Phys. 25 (1954) 809–810] plate-based high-frequency transducer, with a 50 MHz thickness resonant frequency, were compared to those of a KLM model [R. Krimholtz, D.A. Leedom, G.L. Matthei, New equivalent circuit for elementary piezoelectric transducers, Electron. Lett. 6 (1970) 398–399] in the one-dimensional case. The acoustical properties were also found to be in good agreement with those obtained using the finite element (FE) method of ATILA ® software in two-dimensional configuration.

가상 3D 그래픽을 이용한 집속형 초음파 탐촉자 성능평가 방법

초음파 의료 영상기기나 산업용 초음파 검사 시스템의 성능은 초음파 탐촉자의 성능에 의해 크게 좌우된다. 탐촉자의 성능 특성 정보는 보통 제작자가 제공하는 반사원의 초음파 R/F 신호와 주파수 특성에 의해 기술된다. 그러나 집속형 초음파 탐촉자의 경우, 두 자료로는 선명한 C-Scan 이미지를 얻을 수 있다는 것을 보증할 수는 없다. 그래서 집속형 초음파 탐촉자의 성능 평가를 위한 새로운 척도로 상대 초점크기 및 상대 유효초점영역의 모양을 제안한다. 상대 초점의 크기와 상대 유효초점영역의 모양은 쇠구슬로부터 획득된 초음파 R/F 신호를 가상 3차원 영상 복원 프로그램으로 처리하여 얻는다. 제시된 방법은 기존 자료로는 알 수 없었던 탐촉자 성능을 정확히 평가할 수 있었으며, 방법도 간단하여 실제 탐촉자 제작시 불/양품을 쉽게 가려 낼 수 있으며, 탐촉자 경년열화에 따른 성능 저하도 검출할 수 있는 장점을 갖는다. 결과적으로 초음파 영상기기나 산업용 초음파 검사 시스템의 성능을 담보할 수 있다. The performance of ultrasonic testing systems for industrial or medical purpose largely depends on the performance of ultrasonic transducers. Generally, the information about an ultrasonic transducer performance characteristics are expressed by the ultrasonic R/F signal back from a reflector and its frequency characteristics in the data sheet provided by manufacturers. In case of focused ultrasonic transducers, the two pieces of information can, however, hardly assure that the focused ultrasonic transducer would produce well-focused C-scan images. Therefore, we propose the measured size of focal spot and the reconstructed shape of effective focal zone in the focused sound field as novel measures for the performance evaluation of the focused ultrasonic transducers. The process of getting the both measures of the transducers is conducted by the implemented software including sound field scanning and virtual 3D reconstruction functions which requires the echo of a point reflector. The proposed method could, otherwise impossible in the existing method, effectively and simply distinguish superior ones among many transducers made in the same specification and be also used to detect the performance degradation due to the aging of the transducers. Eventually, the quality of performance of the ultrasonic testing systems for industrial or medical purpose is secured.