Performance Of Split Air Conditioner Research Articles

Performance of Split Air Conditioner with Capillary Pipe Variations with R32 Refrigerant on Ships

Performance of Split Air Conditioner with Capillary Pipe Variations with R32 Refrigerant on Ships

Performance Analysis of Using Hydrocarbon Mixed Refrigerant R32-R290 as an Alternative to R410A in Reducing the GWP Value of Household Split Air Conditioners

An experiment conducted on the mixed refrigerant R32-R290, which is used in household air conditioners, is aimed at reducing the global warming potential and improving the environmental CO2 quality. This mixed refrigerant has a lower GWP and density than the refrigerant R410A. This research was conducted to determine the effect of the increased mass charge of R290 as a mixed refrigerant on the performance of split air conditioner. Three percentage compositions of 20%/80%, 25%/75%, and 30%/70% were applied as a change to R410A in household air conditioners. For the testing equipment condition, the air inlet evaporator and condenser temperatures were 17°C (300 K) and 35°C (308 K), respectively. In the first performance test, refrigerant mass charge of 100% (340 g) was employed. In the second test, mass charge of 40% (136 g), 50% (170 g), and 60% (204 g) were utilized for mixed refrigerant R32-R290. Compared to the performance of R410A, the experimental results for the mixed refrigerant indicated a 0.5% increase in the air outlet evaporator temperature, a 1% decrease in the air condenser outlet, a 29.7% increase in the average COP, a 12.9% decrease in the electrical power consumption from 545.12 W to 474.7 W, a 9.1% increase in the average exergy destruction average from 401.5 W to 441.6 W, and a 19.7% increase in the average exergy efficiency from 24.2 W to 30.1 W.

Improving the Performance of Split Air Conditioner by Adding Nano Silver to the Compressor Oil

A high demand on the energy and power has brought scholars more attention to investigate new ways to reduce the energy consumption. The aim of this research is reducing the power consumption required for air conditioning to cool the room by adding nanomaterials to the compressor oil at a mass concentration of 0.15%. Two models of chambers with dimensions (2 x 2 x 2) meters were fabricated to represent the test section and connected to a 1ton compressor, one operating with natural oil as a standard basis for comparison, while the other one with Nano-oil prepared in the laboratory. The mass concentrations of 0.15% of silver nanoparticles (Ag) were prepared, and the stability of the nanoparticles was tested by direct observation for different time periods. The results indicated that the performance of the air conditioner was better with the addition of nanoparticles to the compressor oil compared to the pure oil in the compressor. Reducing energy consumption in the cooling system by (19%). Also, it was found that there is an increase in the cooling speed of the nanotechnology system by (6%)as well as in the efficiency of the Nano-oil system compared to the regular system by (13%). This study showed that the thermophysical properties of the cooling oil increased by increasing the weight ratios of solid nanoparticles by (12%).

Energy Saving in Split Air Conditioner using Evaporative Cooling Pad at the ODU

The objective of the study is to investigate the performance improvement in a split air conditioning system using evaporative cooling pads at ODU (outdoor unit) and to determine optimum thickness and material of the cooling pad. For this purpose experiments were conducted on 0.8 TR capacity split air conditioner charged with refrigerant R-22. For comparison experiments were performed with and without evaporative cooling pad. The effect of the different cooling pad material and thickness on the overall performance of split air conditioner is experimentally found by measuring cooling capacity and the power consumption of the system including water circulation pump. From the experimental work it is found that the cellulose cooling pad gives the best results among the selected materials. Split air conditioner coupled with cellulose cooling pad of 100 mm thickness at ODU results in to 13.8% increase in overall COP, 9.5 % reduction in power consumption and 5.1 % increase in cooling capacity at 35°C DBT and 32% relative humidity outdoor air condition.