Performance Of Single-atom Catalysts Research Articles

Symmetry Evolution Induced 2D Pt Single Atom Catalyst with High Density for Alkaline Hydrogen Oxidation.

The performance of single-atom catalysts is greatly influenced by the chemical environment surrounding the central atom. Here, a salt-assisted method is employed to transform the tetrahedral coordination structure of zeolitic imidazolate frameworks - 8 (ZIF-8)into a planar square coordination structure without altering the ligands. During the subsequent carbonization process, concurrent with the evaporation of zinc atoms, the structure of the nitrogen and carbon carriers (NC carriers) undergoes a transition from five-membered rings to six-membered rings to preserve the 2D structure. This transition results in the generation of additional defect sites on the 2D-NC substrates. Hence, the Pt single-atom catalysts with planar square coordination symmetries can be precisely prepared via electrodeposition (denoted as 2D-Pt SAC). The Pt loading of 2D-Pt SAC is 0.49 ± 0.03 µg cm-2, higher than that of 3D-Pt SAC (0.37 ± 0.04 µg cm-2). In the context of the hydrogen oxidation reaction electrocatalysis, under an overpotential of 50 mV, these single-atom catalysts with 2D coordination exhibit mass activities of 2396 A gPt -1 (32 times higher than commercial Pt/C catalyst, 2 times higher than 3D-PtNC).

The heterointerface effect to boost the catalytic performance of single atom catalysts for sulfur conversion in lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries are considered as one of the promising next-generation energy storage devices due to their characteristics of high energy density and low cost. However, the shuttle effect and sluggish conversion of lithium polysulfide (LiPs) have hindered their commercial applications. To address these issues, in our previous works, we have screened several highly efficient single atom catalysts (SACs) (MN4@G, M = V, Mo and W) with atomically dispersed transition metal atoms supported by nitrogen doped graphene based on high throughput calculations. Nevertheless, they still suffer from low loading of metal centers and unsatisfactory capability for accelerating the reaction kinetics. To tackle such problems, based on first-principles calculations, we systematically investigated the heterointerface effect on the catalytic performance of such three MN4@G toward sulfur conversion upon forming heterostructures with 5 typical two-dimensional materials of TiS2, C3N4, BN, graphene and reduced graphene oxide. Guided by efficient descriptors proposed in our previous work, we screened VN4@G/TiS2, MoN4@G/TiS2 and WN4@G/TiS2 possessing low Li2S decomposition barriers of 0.54, 0.44 and 0.41 eV, respectively. They also possess enhanced capabilities for catalyzing the sulfur reduction reaction as well as stabilizing soluble LiPs. More interestingly, the heterointerface can enhance the capability of the carbon atoms far away from the metal centers for trapping LiPs. This work shows that introducing a heterointerface is a promising strategy to boost the performance of SACs in Li-S batteries.

Synergistic effect between Ni single atoms and Ni nanoparticles for effectively boosting sustainable co-electrolysis of CO2 and hydrazine

The intrinsic performance of single atom catalysts (SACs) to electrochemical CO2 reduction reaction (ECRR) is limited due to the absence of synergistic active sites. Herein, Ni single atom (NiSAs) and Ni nanoparticles (NiNPs) are co-loaded on nitrogen-doped hollow carbon spheres (N-HCSs) by a one-step calcination method, which exhibits high CO selectivity in H-type cell with aqueous solution or an ionic liquid as electrolyte. Particularly, NiSAs-NPs-N-HCSs demonstrate a CO selectivity of 98.98%, yielding an industrial level CO current density of 152.7 mA cm−2 in flow cell. In situ Raman spectroscopy and in situ infrared characterization technology confirm that *COOH and *CO are important intermediates in the ECRR process. Theoretical computations suggest that coexisting NiNPs can reduce the energy barrier of *COOH, thereby improving the ECRR performance, indicating the synergistic effect between NiSAs and NiNPs in the ECRR process. Moreover, NiSAs-NPs-N-HCSs is applied to the membrane electrode assembly system coupling the hydrazine oxidation reaction (HzOR), which can significantly reduce the voltage about 836 mV at 100 mA cm−2.

Breaking Local Charge Symmetry of Iron Single Atoms for Efficient Electrocatalytic Nitrate Reduction to Ammonia.

The electrochemical conversion of nitrate pollutants into value-added ammonia is a feasible way to achieve artificial nitrogen cycle. However, the development of electrocatalytic nitrate-to-ammonia reduction reaction (NO3-RR) has been hampered by high overpotential and low Faradaic efficiency. Here we develop an iron single-atom catalyst coordinated with nitrogen and phosphorus on hollow carbon polyhedron (denoted as Fe-N/P-C) as a NO3-RR catalyst electrode. Owing to the tuning effect of phosphorus atoms on breaking local charge symmetry of the single-Fe-atom catalyst, it facilitates the adsorption of nitrate ions and enrichment of some key reaction intermediates during the NO3-RR process. The Fe-N/P-C catalyst exhibits 90.3% ammonia Faradaic efficiency with a yield rate of 17980 μg h-1 mgcat-1, greatly outperforming the reported Fe-based catalysts. Furthermore, operando SR-FTIR spectroscopy measurements reveal the reaction pathway based on key intermediates observed under different applied potentials and reaction durations. Density functional theory calculations demonstrate that the optimized free energy of NO3-RR intermediates is ascribed to the asymmetric atomic interface configuration, which achieves the optimal electron density distribution. This work demonstrates the enhanced function of heteroatom doping on single atoms for NO3-RR, and provides an effective strategy for improving the catalytic performance of single atom catalysts in different electrochemical reactions.

Breaking Local Charge Symmetry of Iron Single Atoms for Efficient Electrocatalytic Nitrate Reduction to Ammonia

AbstractThe electrochemical conversion of nitrate pollutants into value‐added ammonia is a feasible way to achieve artificial nitrogen cycle. However, the development of electrocatalytic nitrate‐to‐ammonia reduction reaction (NO3−RR) has been hampered by high overpotential and low Faradaic efficiency. Here we develop an iron single‐atom catalyst coordinated with nitrogen and phosphorus on hollow carbon polyhedron (denoted as Fe−N/P−C) as a NO3−RR electrocatalyst. Owing to the tuning effect of phosphorus atoms on breaking local charge symmetry of the single‐Fe‐atom catalyst, it facilitates the adsorption of nitrate ions and enrichment of some key reaction intermediates during the NO3−RR process. The Fe−N/P−C catalyst exhibits 90.3 % ammonia Faradaic efficiency with a yield rate of 17980 μg h−1 mgcat−1, greatly outperforming the reported Fe‐based catalysts. Furthermore, operando SR‐FTIR spectroscopy measurements reveal the reaction pathway based on key intermediates observed under different applied potentials and reaction durations. Density functional theory calculations demonstrate that the optimized free energy of NO3−RR intermediates is ascribed to the asymmetric atomic interface configuration, which achieves the optimal electron density distribution. This work demonstrates the critical role of atomic‐level precision modulation by heteroatom doping for the NO3−RR, providing an effective strategy for improving the catalytic performance of single atom catalysts in different electrochemical reactions.

Tuning the framework flexibility and equilibrium of HRh(CO)2P2 active isomers in single-atom Rh/P&N-POPs catalysts for hydroformylation reactions

Tuning the microenvironment surrounding single atom metals is an effective but challenging way to regulate the performance of single atom catalysts (SACs). Herein, we prepared a series of P, N-abundant porous organic polymers (P&N-POPs) with diverse framework flexibility and coordination ability to serve as SACs’ carriers. The microenvironment (coordination site, coordination number) surrounding Rh and the equilibrium of ea/ee-HRh(CO)2P2 active species were effectively regulated in Rh/P&N-POPs catalysts. Our study shows that the specific active ee-HRh(CO)2(P)2 species confined in the flexible polymeric skeleton endowed the Rh/mPPh3&PPD-POP with superior activity (TOF = 2000 h−1), selectivity of aldehydes (93.5 %), ratio of linear aldehyde to branched aldehyde (l/b ratio = 15.9), favorable stability (10 recycling runs without activity loss) and extensive substrate applicability (19 kinds of olefins) in hydroformylation reactions. Multiple characterization techniques (EXAFS, STEM, in-situ FTIR etc.) were employed to get insights into this effective strategy to regulate the performance of single atom catalysts (SACs).

Transition Metal Single-Atom Catalysts for the Electrocatalytic Nitrate Reduction: Mechanism, Synthesis, Characterization, Application, and Prospects.

Excessive accumulation of nitrate in the environment will affect human health. To combat nitrate pollution, chemical, biological, and physical technologies have been developed recently. The researcher favors electrocatalytic reduction nitrate reaction (NO3 RR) because of the low post-treatment cost and simple treatment conditions. Single-atom catalysts (SACs) offer great activity, exceptional selectivity, and enhanced stability in the field of NO3 RR because of their high atomic usage and distinctive structural characteristics. Recently, efficient transition metal-based SACs (TM-SACs) have emerged as promising candidates for NO3 RR. However, the real active sites of TM-SACs applied to NO3 RR and the key factors controlling catalytic performance in the reaction process remain ambiguous. Further understanding of the catalytic mechanism of TM-SACs applied to NO3 RR is of practical significance for exploring the design of stable and efficient SACs. In this review, from experimental and theoretical studies, the reaction mechanism, rate-determining steps, and essential variables affecting activity and selectivity are examined. The performance of SACs in terms of NO3 RR, characterization, and synthesis is then discussed. In order to promote and comprehend NO3 RR on TM-SACs, the design of TM-SACs is finally highlighted, together with the current problems, their remedies, and the way forward.

Single atom catalyst-mediated generation of reactive species in water treatment.

Water is one of the most essential components in the sustainable development goals (SDGs) of the United Nations. With worsening global water scarcity, especially in some developing countries, water reuse is gaining increasing acceptance. A key challenge in water treatment by conventional treatment processes is the difficulty of treating low concentrations of pollutants (micromolar to nanomolar) in the presence of much higher levels of inorganic ions and natural organic matter (NOM) in water (or real water matrices). Advanced oxidation processes (AOPs) have emerged as an attractive treatment technology that generates reactive species with high redox potentials (E0) (e.g., hydroxyl radical (HO˙), singlet oxygen (1O2), sulfate radical (SO4˙-), and high-valent metals like iron(IV) (Fe(IV)), copper(III) (Cu(III)), and cobalt(IV) (Co(IV))). The use of single atom catalysts (SACs) in AOPs and water treatment technologies has appeared only recently. This review introduces the application of SACs in the activation of hydrogen peroxide and persulfate to produce reactive species in treatment processes. A significant part of the review is devoted to the mechanistic aspects of traditional AOPs and their comparison with those triggered by SACs. The radical species, SO4˙- and HO˙, which are produced in both traditional and SACs-activated AOPs, have higher redox potentials than non-radical species, 1O2 and high-valent metal species. However, SO4˙- and HO˙ radicals are non-selective and easily affected by components of water while non-radicals resist the impact of such constituents in water. Significantly, SACs with varying coordination environments and structures can be tuned to exclusively generate non-radical species to treat water with a complex matrix. Almost no influence of chloride, carbonate, phosphate, and NOM was observed on the performance of SACs in treating pollutants in water when nonradical species dominate. Therefore, the appropriately designed SACs represent game-changers in purifying water vs. AOPs with high efficiency and minimal interference from constituents of polluted water to meet the goals of water sustainability.

Impacts of ruthenium valence state on the electrocatalytic activity of ruthenium ion-complexed graphitic carbon nitride/reduced graphene oxide nanosheets towards hydrogen evolution reaction

Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. This is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.

Effect of surface acidity modulation on Pt/Al2O3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al2O3 SAC has been successfully prepared using a bayerite Al(OH)3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al2O3 with acidic WO3 and basic MgO, the surface acidity of Pt/Al2O3 was tuned. Activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al2O3 performed better in CO oxidation under the reaction condition with H2O. Acidic WO3 modified Pt/Al2O3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H2O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al2O3 and WO3/Pt/Al2O3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al2O3. The superior methanol decomposition performance on WO3/Pt/Al2O3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

The synergetic effect of an aqua ligand and metal site on the performance of single-atom catalysts in H2O2 synthesis: a density functional theory study.

Studying the effect of the coordination field on the catalytic property is critical for the rational design of outstanding electrocatalysts for H2O2 synthesis. Herein, via density functional theory (DFT) calculations and ab initio molecular dynamic (AIMD) simulations, we built an effective computational framework to identify the synergetic effect of an aqua ligand and metal ion on the 2e- ORR catalytic performance under gas condition and aqua solvent. Specifically, the screening results of 29 single-atom catalysts (SACs), TM@C6N6 (TM = transition metal), indicated that Cu@C6N6 features excellent catalytic property with thermal stability, lowest 2e- ORR overpotential (0.02 V) and high selectivity of 99.99%. Once an aqua ligand binds with the Cu site, the activity is reduced to the overpotential of 0.42 V and the selectivity decreased slightly (99.98%) due to the reduction of the adsorption strength for the reaction intermediates. A combination of geometric structures and electronic properties revealed that such changes are correlated with the charge of the Cu site. Furthermore, based on molecular orbital theory, the essence of the high catalytic property deeply lies in the effect of the moderate electron back donation bond (dyz & dxz→) between Cu and O2. This work will provide a route to better design high-performance SACs for H2O2 synthesis effectively.

Electronic Structure Regulation of Single-Atom Catalysts for Electrochemical Oxygen Reduction to H2 O2.

Electrochemical synthesis of hydrogen peroxide (H2 O2 ) via the 2-electron oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process and catalysts combining high selectivity with superior activity are crucial for enhancing the efficiency of H2 O2 electrosynthesis. In recent years, single-atom catalysts (SACs) with the merits of maximum atom utilization efficiency, tunable electronic structure, and high mass activity have attracted extensive attention for the selective reduction of O2 to H2 O2 . Although considerable improvements are made in the performance of SACs toward the 2-electron ORR process, the principles for modulating the catalytic properties of SACs by adjusting the electronic structure remain elusive. In this review, the regulation strategies for optimizing the 2-electron ORR activity and selectivity of SACs by different methods of electronic structure tuning, including the altering of the central metal atoms, the modulation of the coordinated atoms, the substrate effect, and alloy engineering are summarized. Finally, the challenges and future prospects of advanced SACs for H2 O2 electrosynthesis via the 2-electron ORR process are proposed.

Enhanced graphitic domains of unreduced graphene oxide and the interplay of hydration behaviour and catalytic activity

Previous studies indicate that the properties of graphene oxide (GO) can be significantly improved by enhancing its graphitic domain size through thermal diffusion and clustering of functional groups. Remarkably, this transition takes place below the decomposition temperature of the functional groups and thus allows fine tuning of graphitic domains without compromising with the functionality of GO. By studying the transformation of GO under mild thermal treatment, we directly observe this size enhancement of graphitic domains from originally ≤40 nm2 to >200 nm2 through an extensive transmission electron microscopy (TEM) study. Additionally, we confirm the integrity of the functional groups during this process by a comprehensive chemical analysis. A closer look into the process confirms the theoretical predicted relevance for the room temperature stability of GO and the development of the composition of functional groups is explained with reaction pathways from theoretical calculations. We further investigate the influence of enlarged graphitic domains on the hydration behaviour of GO and the catalytic performance of single atom catalysts supported by GO. Additionally, we show that the sheet resistance of GO is reduced by several orders of magnitude during the mild thermal annealing process.

Oxidized single nickel atoms embedded in Ru matrix for highly efficient hydrogen evolution reaction

It is desirable but challenging to fine adjust the electronic structure of single atom to enhance the activity of single atom catalysts (SACs). Herein, we embedded an oxidized single nickel atom into pure ruthenium (Ru) metal (NiRu SAC), thereby constructing an atomic-level interface with high catalytic activity. NiRu SAC exhibits a long-term durability and an extremely low overpotential for hydrogen evolution reaction (optimal value reaches 17 mV) at 10 mA cm−2 which is superior to that of the commercial Pt/C catalyst and most reported Ru-based catalysts. NiRu-0.2 SAC also shows a remarkable oxygen evolution reaction (OER) performance of 210 mV at 10 mA cm−2, and a resulted excellent water splitting property (1.5 V vs. RHE @ 10 mA cm−2). Density functional theory (DFT) calculations demonstrate the fabricated oxidized single-nickel-atomic interface (between single nickel atom and neighboring Ru/O atom) not only lowers the energy barrier for water dissociation but also optimizes the H adsorption through the interaction between the interfacial Ru and O atoms. The single-atomic tailoring provides a new idea to further enhance the performance of single atom catalysts to satisfy the industrial applications.

Engineering unsymmetrically coordinated Cu-S1N3 single atom sites with enhanced oxygen reduction activity

Atomic interface regulation is thought to be an efficient method to adjust the performance of single atom catalysts. Herein, a practical strategy was reported to rationally design single copper atoms coordinated with both sulfur and nitrogen atoms in metal-organic framework derived hierarchically porous carbon (S-Cu-ISA/SNC). The atomic interface configuration of the copper site in S-Cu-ISA/SNC is detected to be an unsymmetrically arranged Cu-S1N3 moiety. The catalyst exhibits excellent oxygen reduction reaction activity with a half-wave potential of 0.918 V vs. RHE. Additionally, through in situ X-ray absorption fine structure tests, we discover that the low-valent Cuprous-S1N3 moiety acts as an active center during the oxygen reduction process. Our discovery provides a universal scheme for the controllable synthesis and performance regulation of single metal atom catalysts toward energy applications.

Single-Iron Supported on Defective Graphene as Efficient Catalysts for Oxygen Reduction Reaction

Essentially, the performance of single-atom catalysts (SACs) has been strongly affected by their supports. Herein, the structural, electronic, and catalytic properties of single-iron catalysts over...

The effect of oxygen vacancy at CO oxidation on anatase (001)-supported single-Au catalyst

The catalytic performance of CO oxidation on the TiO2-supported gold catalysts would be affected by the O vacancies on a TiO2 surface. First-principle studies here are focused on how the O vacancy addresses the performance of single atom catalysts on CO oxidation. Three possible configurations of gold adatoms and O vacancies on anatase TiO2(001) support are considered as follows: A gold adatom above an O vacancy, a gold adatom or two gold adatoms above an O vacancy dimer. The O vacancy dimer favors the binding of negatively charged gold adatoms on anatase TiO2(001) support. However, the dual gold adatoms slightly increase the barrier energy in CO oxidation through the Au-assisted Mars-van Krevelen mechanism. The formation of a stable carbonate on the initial-existing O vacancy reveals that the extra O vacancy deteriorates the catalytical performance of CO oxidation. In final, the high catalytic performances of TiO2/Au catalyst are attributed to the synergistic effects between a negatively charged Au adatom and a lower-coordinated Ti3+ ion.