Performance Of Organic Solar Cells Research Articles

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2-b]thiophene Additive.

Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2-b]thiophene (TT) and 3,6-dibromothieno[3,2-b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs)can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT-treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80>2800h at 65°C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8-BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Designing A-D-A Type Fused-Ring Electron Acceptors with a Bulky 3D Substituent at the Central Donor Core to Minimize Non-Radiative Losses and Enhance Organic Solar Cell Efficiency.

Designing and synthesizing narrow bandgap acceptors that exhibit high photoluminescence quantum yield (PLQY) and strong crystallinity is a highly effective, yet challenging, approach to reducing non-radiative energy losses (∆Enr) and boosting the performance of organic solar cells (OSCs). We have successfully designed and synthesized an A-D-A type fused-ring electron acceptor, named DM-F, which features a planar molecular backbone adorned with bulky three-dimensional camphane side groups at its central core. These bulky substituents effectively hinder the formation of H-aggregates of the acceptors, promoting the formation of more J-aggregates and notably elevating the PLQY of the acceptor in the film. As anticipated, DM-F showcases pronounced near-infrared absorption coupled with impressive crystallinity. Organic solar cells (OSCs) leveraging DM-F exhibit a high EQEEL value and remarkably low ∆Enr of 0.137 eV-currently the most minimal reported value for OSCs. Moreover, the power conversion efficiency (PCE) of binary and ternary OSCs utilizing DM-F has reached 16.16% and 20.09%, respectively, marking a new apex in reported efficiency within the OSCs field. In conclusion, our study reveals that designing narrow bandgap acceptors with high PLQY is an effective way to reduce ∆Enr and improve the PCE of OSCs.

Powerful role of benzotriazole polymers and small molecules in organic solar cells.

In the dynamic landscape of renewable energy technologies, organic solar cells (OSCs) have emerged as frontrunners, offering a sustainable and promising alternative for harnessing solar energy. This review article delves into the recent strides made in leveraging the potential of the benzotriazole nucleus within the context of organic solar cells. The unique electronic properties of benzotriazole, coupled with its structural adaptability, position it as a key component in the pursuit of enhancing OSC performance. As researchers delve deeper into the intricacies of this compound, a clearer understanding of its impact on light absorption, charge transport, and overall device stability emerges. The exploration of recent literature in the last three years reveals a rich landscape with innovation and discovery, showcasing the diverse approaches taken to incorporate benzotriazole into different OSC architectures. From fundamental studies elucidating its electronic interactions to applied research refining its integration strategies, the potential of benzotriazole in advancing the capabilities of organic solar cells becomes increasingly evident, and showing that, with the most important advances in the last three years, is the main goal of this article.

Improved performance of ternary organic solar cells based on both bulk and pseudo-planar heterojunction active layer

The high photovoltaic conversion efficiency (PCE) of ternary organic solar cells (OSCs) based on PTB7-Th, PC71BM and IEICO-4F material is obtained, the short-circuit current density (J SC), fill factor (FF), and open-circuit voltage is 25.90 mA cm−2, 73.20% and 0.71 V, respectively. PCE is as high as 13.53%. It is the highest PCE of ternary OSCs based on PTB7-Th, PC71BM and IEICO-4F materials for all we know. The narrow bandgap material of IEICO-4F is deposited on PTB7-Th:PC71BM bulk heterojunction (BHJ) by layer-by-layer process. We constructed the dual bandgap active layer both BHJ and pseudo-planar heterojunction (P-PHJ), it could be defined as ternary BHJ/P-PHJ of OSCs. This type of OSCs is not only the complementary bandgap material of the active layer, but also increasing the donor/acceptor (D/A) interface. The excitons generation and collection of the device are increased leading a higher J SC and FF. The semitransparent OSCs (ST-OSCs) is prepared by varying the thickness of Ag electrode and PCE can reach 9.70%, and the average visible light transmittance and light use efficiency of ST-OSCs are improved effectively.

Tailoring Cyano Substitutions on Quinoxaline‐based Small‐Molecule Acceptors Enabling Enhanced Molecular Packing for High‐Performance Organic Solar Cells

AbstractCyanation is a common chemical modification strategy to fine‐tune the energy levels and molecular packing of organic semiconductors, especially materials used in organic solar cells (OSCs). Generally, cyanation is used to modify the end groups of high‐performance small‐molecule acceptors (SMAs). However, the cyanation strategy has not been investigated on the central backbone of SMAs, which could introduce stronger intermolecular interaction and enhance the π–π stacking for rapid charge transport. This paper, for the first time, reports a new cyanation strategy on the central benzo‐quinoxaline core and synthesizes two novel A‐DA'D‐A type SMAs, named BQx‐CN and BQx‐2CN, with mono‐ and di‐cyanide groups, respectively. Through tailoring the number of CN groups, the BQx‐CN‐based OSC exhibits the best device performance of 18.8%, which is significantly higher than the non‐cyano BQx‐based one. The reason for the superior performance of BQx‐CN‐based devices can be attributed to the fine‐tuned energy level, stronger packing, and ideal phase segregation, which lead to superior exciton dissociation, faster charge transport, and suppressed recombination, therefore the highest fill factor (FF) and power conversion efficiencies (PCE). The research demonstrates the effectiveness of the cyanation strategy on the central core of SMAs for enhanced molecular packing and better performance of OSCs.

Dipole Moments Regulation of Biphosphonic Acid Molecules for Self-assembled Monolayers Boosts the Efficiency of Organic Solar Cells Exceeding 19.7.

PSS has been widely used as a hole extraction layer (HEL) in organic solar cells (OSCs). However, their acidic nature can potentially corrode the indium tin oxide (ITO) electrode over time, leading to adverse effects on the longevity of the OSCs. Herein, we have developed a class of biphosphonic acid molecules with tunable dipole moments for self-assembled monolayers (SAMs), namely, 3-BPIC(i), 3-BPIC, and 3-BPIC-F, which exhibit an increasing dipole moment in sequence. Compared to centrosymmetric 3-BPIC(i), the axisymmetric 3-BPIC and 3-BPIC-F exhibit higher adsorption energies (Eads) with ITO, shorter interface spacing, more uniform coverage on ITO surface, and better interfacial compatibility with the active layer. Thanks to the incorporation of fluorine atoms, 3-BPIC-F exhibits a deeper highest occupied molecular orbital (HOMO) energy level and a larger dipole moment compared to 3-BPIC, resulting in an enlarged work function (WF) for the ITO/3-BPIC-F substrate. These advantages of 3-BPIC-F could not only improve hole extraction within the device but also lower the interfacial impedance and reduce nonradiative recombination at the interface. As a result, the OSCs using SAM based on 3-BPIC-F obtained a record high efficiency of 19.71%, which is higher than that achieved from the cells based on 3-BPIC(i) (13.54%) and 3-BPIC (19.34%). Importantly, 3-BPIC-F-based OSCs exhibit significantly enhanced stability compared to that utilizing PEDOT:PSS as HEL. Our work offers guidance for the future design of functional molecules for SAMs to realize even higher performance in organic solar cells.

A theoretical investigation for improving the performance of non-fullerene organic solar cells through side-chain engineering of BTR non-fused-ring electron acceptors

In the current quantum chemical study, indacenodithiophene donor core-based the end-capped alterations of the reference chromophore BTR drafted eight A2-A1-D-A1-A2 type small non-fullerene acceptors. All the computational simulations were executed under MPW1PW91/6-31G (d, p) level of DFT. The UV-Vis absorption, open circuit voltage, electron affinity, ionization potential, the density of states, reorganization energy, orbital analysis, and non-covalent interactions were studied and compared with BTR. Several molecules of our modeled series BT1-BT8 have shown distinctive features that are better than those of the BTR. The open circuit voltage (VOC) of BT5 has a favorable impact, allowing it to replace BTR in the field of organic solar cells. The charge carrier motilities for proposed molecules generated extraordinary findings when matched to the reference one (BTR). Further charge transmission was confirmed by creating the complex with a PM6 donor molecule. The remarkable dipole moment contributes to the formation of non-covalent bond interactions with chloroform, resulting in superior charge mobility. Based on these findings, it can be said that every tailored molecule has the potential to surpass chromophore molecule (BTR) in OSCs. So, all tailored molecules may enhance the efficiency of photovoltaic cells due to the involvement of potent terminal electron-capturing acceptor2 moieties. Considering these obtained results, these newly presented molecules can be regarded for developing efficient solar devices in the future.

Asymmetric non-fused ring acceptor with low energy loss for efficient organic solar cells

Non-fused ring acceptors (NFRA) show high structural diversity with low synthesis complexities and high cost-effectiveness, which holds the potential to boost the performance of organic solar cells (OSCs). For OSCs, it is crucial to broaden the absorption range while minimizing energy loss. One strategy involves creating acceptors with asymmetric structures. However, to date, there have been relatively few reports on NFRA with asymmetric backbones. Here, we designed a new NFRA molecule UF-ATT-2F with asymmetric π-bridges (thieno [3,2-b] thiophene and thiophene) and studied its performance in OSC. Compared with two symmetric reference molecules UF-T-2F and UF-TT-2F, the device based on the asymmetric acceptor UF-ATT-2F exhibits much lower energy loss, more appropriate phase separation scale and broader absorption range, consequently achieving a higher open-circuit voltage (Voc) exceeding 0.9 V and a decent PCE of 13.26 %. This work demonstrates that incorporating asymmetric π-bridge is an effective strategy for the design low-energy loss and high-performance organic photovoltaic acceptor.

Modification and performance enhancement of P3HT:PCBM based organic solar cells incorporated with phosphorus doped carbon quantum dots

We demonstrate a strategy to improve the performance of organic solar cells (OSCs) by phosphorous doped CQDs (P-CQDs). The presence of P-CQDs P3HT:PCBM layer (1 vol% of P-CQDs) enhanced photon harvesting in the UV region and emitting visible light, the PCE was increased from 2.19% to 2.48% and champion device provided a FF of 55.34%. The incorporation of P-CQDs leads to effective photons harvesting ability and collection/transport of charge carriers. The optical absorption and crystallinity of photoactive layer improved with the incorporation of P-CQDs. The larger grain size distribution were obtained with P-CQDs additive helping to better charge extraction.

Effect of nitro-substituted ending group on the photovoltaic and photocatalytic performance of non-fullerene acceptors

The Y-series non-fullerene acceptors (NFAs) significantly enhance organic photovoltaic device efficiency, approaching 20%. Recent studies demonstrate their commendable photocatalytic performance in bulk heterojunction photocatalysis. Chemical modification of end groups emerges as a pivotal way to modulate molecular electrical and optical characteristics, thereby improving the organic solar cells (OSCs) performance. Among Y-series NFAs, 2-(2,3-dihydro-3-oxo-1H-inden-1-ylidene)propanedinitrile (INCN) and its derivatives stand out as the most successful end groups. However, a restricted range of modifying groups, such as the fluorine atom (–F) and the hydroxyl group (–OH), are currently employed to explore both the photovoltaic and photocatalytic properties of Y-series NFAs, research on other substituents for INCN remains largely unexplored to date. In this study, nitro-substituted end groups were incorporated into the Y6 skeleton, resulting in a new NFA, named Y6-NO. Simultaneously, INCN is incorporated into the Y6 skeleton to create Y6-IN as a reference molecule for simultaneously investigating the photovoltaic and photocatalytic properties of the two NFAs. In organic photovoltaics, Y6-NO, featuring nitro groups, exhibits a red-shifted absorption, lower molecular energy levels, and enhanced electron transport, leading to a superior power conversion efficiency (PCE) of 17.03 % for OSCs, as opposed to 10.45 % for Y6-IN. Conversely, in the photocatalytic hydrogen evolution reaction (HER) for water splitting, the nitro groups in Y6-NO lowers the energy level of the lowest unoccupied molecular orbital (LUMO), resulting in a reduced overpotential when combined with the co-catalyst Pt. Consequently, the HER rate of PM6:Y6-NO nanoparticles (72.2 mmol h−1 g−1) is lower than that of PM6:Y6-IN nanoparticles (108.5 mmol h−1 g−1). This study highlights that through judicious end-group chemical modification, the photovoltaic and photocatalytic properties of the acceptors can be effectively modulated.

Tackling Energy Loss in Organic Solar Cells via Volatile Solid Additive Strategy.

The energy loss induced open-circuit voltage (VOC) deficit hampers the rapid development of state-of-the-art organic solar cells (OSCs), therefore, it is extremely urgent to explore effective strategies to address this issue. Herein, a new volatile solid additive 1,4-bis(iodomethyl)cyclohexane (DIMCH) featured with concentrated electrostatic potential distribution is utilized to act as a morphology-directing guest to reduce energy loss in multiple state-of-art blend system, leading to one of highest efficiency (18.8%) at the forefront of reported binary OSCs. Volatile DIMCH decreases radiative/non-radiative recombination induced energy loss (ΔE2/ΔE3) by rationally balancing the crystallinity of donors and acceptors and realizing homogeneous network structure of crystal domain with reduced D-A phase separation during the film formation process and weakens energy disorder and trap density in OSCs. It is believed that this study brings not only a profound understanding of emerging volatile solid additives but also a new hope to further reduce energy loss and improve the performance of OSCs.

Chalcogen Atoms Regulate the Organic Solar Cell Performance of B-N-Based Polymer Donors.

Donor polymers play a key role in the development of organic solar cells (OSCs). B-N-based polymer donors, as new types of materials, have attracted a lot of attention due to their special characteristics, such as high E(T1), small ΔEST, and easy synthesis, and they can be processed with real green solvents. However, the relationship between the chemical structure and device performance has not been systematically studied. Herein, chalcogen atoms that regulate the OSCs performance of B-N-based polymer donors were systematically studied. Fortunately, the substitution of a halogen atom did not affect the high E(T1) and small ΔEST character of the B-N-based polymer. The absorption and energy levels of the polymer were systematically regulated by O, S, and Se atom substitution. The PBNT-TAZ:Y6-BO-based OSCs device demonstrated a high power conversion efficiency of 15.36%. Moreover, the layer-by-layer method was applied to further optimize the device performance, and the PBNT-TAZ/Y6-BO-based OSCs device yielded a PCE of 16.34%. Consequently, we have systematically demonstrated how chalcogen atoms modulated the electronic properties of B-N-based polymers. Detailed and systematic structure-performance relationships are important for the development of next-generation B-N-based materials.

Exploring structure-property landscape of non-fullerene acceptors for organic solar cells.

We present a comprehensive analysis of the structure-property relationship in small molecule non-fullerene acceptors (NFAs) featuring an acceptor-donor-acceptor configuration employing state-of-the-art quantum chemical computational methods. Our focus lies in the strategic functionalization of halogen groups at the terminal positions of NFAs as an effective means to mitigate non-radiative voltage losses and augment photovoltaic and photophysical properties relevant to organic solar cells. Through photophysical studies, we observe a bathochromic shift in the visible region for all halogen-functionalized NFAs, except type-2, compared to the unmodified compound. Most of these functionalized compounds exhibit exciton binding energies below 0.3eV and ΔLUMO less than 0.3eV, indicating their potential as promising candidates for organic solar cells. Selected candidate structures undergo an analysis of charge transport properties using the semi-classical Marcus theory based on hopping transport formalism. Molecular dynamics simulations followed by charge transport simulations reveal an ambipolar nature of charge transport in the investigated NFAs, with equivalent hole and electron mobilities compared to the parent compound. Our findings underscore the crucial role of end-group functionalization in enhancing the photovoltaic and photophysical characteristics of NFAs, ultimately improving the overall performance of organic solar cells. This study advances our understanding of the structure-property relationships in NFAs and provides valuable insights into the design and optimization of organic solar cell materials.

Synergistic strategies to unveil the dual influence of additive and annealing treatment on the morphology of isatin-derived low bandgap small molecule donor in solution-processed organic solar cells

A novel organic small molecule, 5-(4-(diphenylamino)phenyl)-1-octylindoline-2,3-dione (TPI) containing an alkyl chain substituted electron accepting isatin (indoline-2,3-dione) and strong electron withdrawing N, N-diphenylaniline units have been synthesized through Suzuki coupling reaction. The molecular structure of TPI is confirmed by NMR, FT-IR, and Mass spectroscopy techniques. The TPI molecule exhibits a low band gap of approximately ∼ 2.03 eV which is also supported by the DFT results. The influence of additive and heat treatment on the electronic, morphological, and photovoltaic performance of organic solar cells was investigated meticulously. The TPI donor exhibits complementary light absorption with fullerene acceptor in combination with DIO and TA which efficiently absorb the photon in the 300–730 nm range. The TPI was later used as an electron donor material for the fabrication of organic solar cells. Remarkably, the morphology-dependent optimized TPI:PC71BM (1:3.0) exposed excellent power conversion efficiency (PCE) of about ∼ 5.56 % with enhanced VOC of ∼ 0.811 V, JSC of 11.81 mA cm−2 and FF of 55.3 % fabricated in addition with DIO and thermal annealing treatment. Most importantly, the unencapsulated devices maintained > 96 % of the initial PCE value after 240 h under ambient temperature. Our findings indicate that isatin-derived small molecules with simple architecture propose great potential for promising BHJ-OSCs material.

Combined experimental and DFT investigation on photovoltaic performance of low-cost metal-free organic dye-sensitized solar cells

Metal-free organic dyes, viz. eosin yellow (eosin-Y), fluorescein and curcumin were used as sensitizers in zinc oxide (ZnO) nanoparticles thin film photoanode based dye-sensitized solar cell (DSSC) and also investigated by density functional theory (DFT). UV–vis spectrophotometer was employed to determine absorption feature of dyes in solar spectrum, adsorption tendency towards ZnO photoanode surface, molar-extinction coefficient and desorbed dye molecules from the photoanode surface. The photovoltaic performance of metal-free organic DSSCs employing imidazole based liquid electrolyte and platinum counter electrode was evaluated under standard light exposure of 85 mW/cm2. Among the dyes, eosin-Y DSSC delivered overall energy conversion efficiency (η) of 0.95 % with short-circuit photocurrent density (Jsc) of 2.98 mA cm−2, open-circuit photovoltage (Voc) of 0.54 V and fill factor (FF) of 0.50, which was about 20 % and 40 % higher than that of the energy conversion efficiency of DSSCs sensitized with fluorescein and curcumin dyes, respectively. The better photovoltaic performance exhibited by the eosin-Y DSSC is credited to its high molar extinction coefficient, intense light absorption in the solar spectrum and good adsorption on ZnO thin film photoanode surface. The maximum driving force for dye molecules regeneration and electron injection value of eosin-Y dye attached on the surface of ZnO cluster (eosin-Y + ZnO) resulted in higher Voc. The outcomes of this experimental data are in well agreement with DFT results.

Halogenated 9H-Indeno[1,2-b]Pyrazine-2,3-Dicarbonitrile End Groups Based Asymmetric Non-Fullerene Acceptors for Green Solvent-Processable, Additive-Free, and Stable Organic Solar Cells.

Non-fullerene acceptors (NFAs) significantly enhance photovoltaic performance in organic solar cells (OSCs) using halogenated solvents and additives. However, these solvents are environmentally detrimental and unsuitable for industrial-scale production, and the issue of OSCs' poor long-term stability persists. This report introduces eight asymmetric NFAs (IPCnF-BBO-IC2F, IPCnF-BBO-IC2Cl, IPCnCl-BBO-IC2F, and IPCnCl-BBO-IC2Cl, where n = 1 and 2). These NFAs comprise a 12,13-bis(2-butyloctyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2'',3'':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]thieno-[3,2-b]indole (BBO) core. One end of the core attaches to a mono- or di-halogenated 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) end group (IPC1F, IPC1Cl, IPC2F, or IPC2Cl), while the other end connects to a 2-(5,6-dihalo-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC) end group (IC2F or IC2Cl). The optical and electronic properties of these NFAs can be finely tuned by controlling the number of halogen atoms. Crucially, these NFAs demonstrate excellent compatibility with PM6 even in o-xylene, facilitating the production of additive-free OSCs. The di-halogenated IPC-based NFAs outperform their mono-halogenated counterparts in photovoltaic performance within OSCs. Remarkably, the di-halogenated IPC-based NFAs maintain 94‒98% of their initial PCEs over 2000 h in air without encapsulation, indicating superior long-term device stability. These findings imply that the integration of di-halogenated IPCs in asymmetric NFA design offers a promising route to efficient, stable OSCs manufactured through environmentally friendly processes.

Effective N‐Doping of Non‐Fullerene Acceptor via Sequential Deposition Enables High‐Efficiency Organic Solar Cells

AbstractCharge transport in the active layer, which can be effectively modulated by molecular doping of organic semiconductors, significantly affects the photovoltaic performance of organic solar cells (OSCs). However, it is difficult to control the dopant distribution in the bulk heterojunction (BHJ) films, which hinders efficient doping in OSCs. Herein, an effective n‐doping strategy is developed via sequential deposition (SD) of D18 donor and doped acceptor. The favorable vertical component distribution in SD films helps to optimize carrier transport pathways. The SD method confines the n‐dopant N‐DMBI to the acceptor layer, allowing positive effects of molecular doping. Consequently, the doped SD device exhibits superior charge transport with suppressed charge recombination, lower trap density, and enhanced charge extraction compared to the undoped one, resulting in a high power conversion efficiency of 19.55% for D18/L8‐BO binary OSCs. In addition, the doping does not affect the thermal stability of the devices, with the doped SD device retaining over 90% of its initial efficiency after 1200 h of heating at 80 °C. The universality of the SD doping method is also verified in other non‐fullerene acceptor systems. These results demonstrate the great potential of SD doping strategy for building high‐performance OSCs with enhanced charge transport.

The Role of Device Architecture and Interfacial Layer on Performance of Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST‐OSCs) generally suffer from voltage loss in comparison to their opaque counterparts. Herein, ST‐OSCs constructed with conventional and inverted structures have been explored. The voltage losses of the inverted ST‐OSCs are lower than that of the conventional architectures when the thicknesses of the top transparent electrodes approach the percolation threshold, which is attributed to the larger surface energy of the bottom seeding layers, higher built‐in electric fields, and lower recombination losses. Moreover, ST‐OSCs with conventional architectures based on four commonly used electrode transporting layers (ETLs) PDINN, PDINO, PNDIT‐F3N, and PFN‐Br are employed to distinguish the Voc variation when capping with 10 nm top electrodes. It is revealed that ETL with larger surface energy and a stronger ability to reduce the cathode work function is more beneficial for reducing the voltage loss for ST‐OSCs. This work demonstrates the crucial role of device structure and interfacial layers in optimizing the ST‐OSC device performance.

π-Extended giant dimeric acceptor as a third component enables highly efficient ternary organic solar cells with efficiency over 19.2%

Ternary strategy with a suitable third component is a successful strategy to improve the photovoltaic performance of organic solar cells (OSCs). Very recently, Y-series based giant molecule acceptors or oligomerized acceptors have emerged as promising materials for achieving highly efficient and stable binary OSCs, while application as third component for ternary OSCs is limited. Here a novel π-extended giant dimeric acceptor, GDF, is developed based on central Y series core fusion and rigid BDT as linker, and then incorporated into the state-of-the-art PM1:PC6 system to construct ternary OSCs. The GDF has a near planar backbone, resulting in increased π-conjugation, excellent crystallinity, and good electron transport capacity. When GDF is introduced into the PM1:PC6 system, it ensues in a cascade like the lowest unoccupied molecular orbitals (LUMO) energy level alignment, a complementary absorption band with PM1 and PC6, higher and balanced hole and electron mobility, slightly smaller domain size, and a higher exciton dissociation probability for PM1:PC6:GDF (1:1.1:0.1) blend film. As a consequence, the PM1:PC6:GDF (1:1.1:0.1) ternary OSC achieves a champion PCE of 19.22%, with a significantly higher open-circuit voltage and short-circuit current density, compared to 18.45% for the PM1:PC6 (1:1.2) binary OSC. Our findings show that employing a π-extended giant dimeric acceptor as a third component significantly improves the photovoltaic performance of ternary OSCs.

Precise control of hole transport layer integration on PDTS-DTTFBT: PC71BM organic solar cells

Efforts to enhance the commercial viability of organic solar cells (OSCs) prioritize high power conversion efficiency(PCE). This study proposes precision tuning of the photoactive layer thickness in the nanoscale as an innovative method to boost efficiency. Utilizing PDTS-DTTFBT: PC71BM, an organic blend, as the active layer aims to capture a broad photon range while addressing optical losses due to low-energy photons rather than mere absorption. The study integrates PEDOT: PSS and molybdenum trioxide (MoO3) as hole transport layers, alongside C60, PC60BM, and ZnO electron transport layers. Meticulous analysis of their photon absorption, reflectance, charge carrier generation, and localized energy variance emphasizes their impact on the efficiency of PDTS-DTFFBT: PC71BM active films. Notably, incorporating MoO3 as the hole transport layer significantly mitigated losses and altered localized energy, culminating in an impressive 17.69% efficiency at an optimized blend thickness of 120 nm. Augmenting blend thickness directly boosts PCE and current density until reaching optimal thickness, while diminishing fill factor, with minimal effect on open-circuit voltage. These results highlight the efficacy of this methodology in enhancing the performance of organic solar cells.