Perfluoroalkyl Carboxylic Acids Research Articles

Occurrence and Risk Assessment of Perfluoroalkyl Substances in Surface Water of Hefei City, Southeast China

In this work, the spatial distribution, potential sources, and risk assessment of perfluoroalkyl substances (PFASs) were investigated at 22 surface water sampling sites in Hefei City. The study encompassed 11 distinct types of PFASs, which included 7 perfluoroalkyl carboxylic acids (PFCAs) and 4 perfluoroalkyl sulfonic acids (PFSAs). The findings indicated that the overall concentration of PFASs varied between 12.96 to 545.50 ng/L, with perfluorooctanoic acid (PFOA), perfluorobutanesulfonic acid (PFBS), perfluorobutyric acid (PFBA), and perfluorohexanoic acid (PFHxA) being the most prevalent, contributing to an average of 71% of the total PFASs concentration. Principal component analysis (PCA) elucidated the primary sources of PFASs, which included industrial emissions, fluoropolymer production and treatment, textile processing, and the impact of the electroplating industry. Employing the risk quotient (RQ) method facilitated the assessment of ecological risks associated with PFASs in surface water within the study area, suggesting that the current concentrations of PFASs in Hefei’s surface water pose a relatively low ecological risk. However, the long-term ecological effects of PFASs cannot be overlooked due to their potential for long-range transport and the cumulative nature of biological food chains.

Spatial distribution, source, and fate of per- and polyfluoroalkyl substances in the surrounding environment of closed and converted fluorochemical factories in Fujian, China

Following the closure of perfluorooctanesulfonic acid (PFOS) production to comply with the Stockholm Convention regulations or restrictions, manufacturers have shifted to developing short-chain alternatives like perfluorobutane sulfonic acid (PFBS). However, limited research has been conducted to evaluate the impact of this transition on the surrounding environment. This study focused on the spatial distribution, source, and fate of 18 per- and polyfluoroalkyl substances (PFAS) in the surrounding environment of the closure and transformation of two PFAS manufacturing plants in Fujian, China. The total concentrations of PFAS in surface water, sediment, and fish were within the range of 48.9–72,400 ng/L, 0.930–57.6 ng/g dw, and 3.33–1245 ng/g dw, respectively. The predominant compounds were PFBS, PFOS, and perfluorooctanoic acid (PFOA) among the three matrices. Principal component analysis highlighted significant differences in PFAS profiles across different regions of the Futun River, suggesting diverse sources of PFAS. Source apportionment indicated that despite being closed or converted for almost three years, the two factories still significantly impacted the surrounding environment. The shutdown factory mainly released PFAS characterized by perfluoroalkyl sulfonic acids. In contrast, the PFAS were released from conversion plant with the fingerprint being PFBS and perfluoroalkyl carboxylic acids. The conversion of the factories has resulted in the coexistence of long-chain and short-chain PFAS, which has complicated the composition of PFAS in the environment. As sewage treatment plant could not effectively remove PFBS and perfluorobutanoic acid (PFBA) in wastewater, and due to their strong migration ability, these chemicals had a wider impact range, increasing the difficulty of environmental restoration and management. Risk assessment showed that PFAS downstream of the two factories posed high or moderate ecological risks. Specifically, PFBS, PFOS, and PFOA displayed the highest risk quotients and should be paid further attention.

Integration of ultrashort-chain compounds into the biomonitoring of per- and polyfluorinated substances in human plasma and serum

Ultrashort-chain (USC) per- and polyfluoroalkyl substances (PFAS) are small and very polar compounds with carbon chain lengths of shorter than C4. Their ubiquitous and high levels of occurrence in environmental aquatic systems have raised significant concern in conjunction with long-chain PFAS contamination. Measuring USC PFAS in blood can not only monitor human exposure but also serves as a valuable tool for studying the potential risks associated with USC PFAS exposure. The high polarity of USC PFAS poses a challenge to current analytical practices based on the reversed-phase liquid chromatography, primarily due to insufficient chromatographic retention. In this study, a simple and reliable workflow was developed for the simultaneous analysis of C1 to C10 perfluoroalkyl carboxylic and sulfonic acids, along with four alternative PFAS, in human plasma and serum. The chromatographic analysis was conducted using a polar-embedded reversed-phase LC column. Fetal bovine serum (FBS) was chosen for method validation due to its absence of all analytes, except for trifluoroacetic acid (TFA). Subsequently, a TFA isotope, 13C-TFA, was employed as a surrogate to assess the method accuracy for TFA in FBS. A single-step sample preparation procedure, conducted by mixing 100 µL of FBS with 200 µL of methanol, was demonstrated to be effective for the accurate and precise analysis of fortified FBS samples. Ten isotopes of C3 to C10 PFAS, serving as extracted internal standards, were added to the samples at 1 ppb to validate the accuracy of the entire workflow. Calibration standards were prepared in reverse osmosis water due to its cleanliness for all analytes. Phosphate-buffered saline was incorporated into the calibration standard solution to achieve similar chromatographic performance between standard and sample solutions. The calibration ranges varied among different analytes, spanning from 0.05 – 40 ppb, 0.1 – 40 ppb, 0.25 – 40 ppb, and 0.5 – 40 ppb. Method accuracy and precision were evaluated at three fortification levels, ranging from 0.4 to 30 ppb. All analytes and extracted internal standards exhibited recovery values within 20 % of the nominal concentration across all fortification levels. Satisfactory method precision was demonstrated with%RSD values <12 %. The validated method was applied to measure PFAS in NIST 1950 and 1957 standard reference human plasma and serum, affirming the established workflow is suitable for accurate quantification of C1 to C10 PFAS in human plasma and serum matrices.

Nationwide occurrence and discharge mass load of per- and polyfluoroalkyl substances in effluent and biosolids: A snapshot from 75 wastewater treatment plants across Australia

Wastewater treatment plants (WWTPs) have been recognized as secondary sources of per- and polyfluoroalkyl substances (PFAS) released into the environment. In this study, PFAS concentrations were measured in effluent and biosolids samples collected from 75 WWTPs across Australia during the 2016 Census period, which covers more than half of the Australian population. Twelve PFAS compounds, including six C5-C10 perfluoroalkyl carboxylic acids (PFCAs), four perfluoro sulfonic acids (PFSAs) such as perfluorobutane sulfonate (PFBS), perfuorohexane sulfonic (PFHxS), perfluorooctane sulfonic acid (PFOS), and perfluorodecane sulfonic acid (PFDS), and one fluorotelomer sulfonic acid (6:2 FTS), were detected in the effluent, with concentrations up to 504 ng/L (PFHxS). Among these, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA), and perfluoropentanic acid (PFPeA) exhibited the highest median concentrations. In the biosolids, a total of 21 PFAS compounds were detected, encompassing ten C4-C14 PFCAs, four PFSAs, two FTS (6:2 and 8:2 FTS), perfluorooctane sulfonamide (PFOSA), two perfluorooctane sulfonamido acetic acid (NMethyl FOSAA and NEthyl FOSAA), and two perfluorooctane sulfonamido ethanol (FOSE), with dry weight (dw) concentrations approaching 235 ng/g (PFOS). The highest median and mean concentrations were observed for perfluorodecanoic acid (PFDA) and PFOS. An annual discharge of approximately 250 kg of the total 21 PFAS compounds was estimated through the effluent and biosolids of the participating WWTPs. Notably, PFOS and 6:2 FTS constituted the largest proportion of total PFAS in the WWTPs' output. While PFCAs were higher in effluent concentrations compared to influent levels across most WWTPs (92% of WWTPs for ∑8PFCAs), the concentrations of PFSAs either decreased or remained relatively stable (in 80% of WWTPs for ∑4PFSAs) throughout the wastewater treatment process.

Passive biomonitoring for Per- and Polyfluoroalkyl substances using invasive clams, C. fluminea

Per-and polyfluoroalkyl substances (PFAS) are a class of toxic manufactured chemicals in commercial and consumer products. They are resistant to environmental degradation and mobile in soil, air, and water. This study used the introduced bivalve Corbicula fluminea as a passive biomonitor at sampling locations in a primary drinking water source in Virginia, USA. Many potential PFAS sources were identified in the region. Perfluorohexane sulfonate (PFHxS) and 6:2 fluorotelomer sulfonic acids (6:2 FTS) levels were highest downstream of an airport. The highest levels of short-chain carboxylic acids were in locations downstream of a wastewater treatment plant. Measured PFAS concentrations varied by location in C. fluminea, sediment, and surface water samples. Two compounds were detected across all three mediums. Calculated partitioning coefficients confirm bioaccumulation of PFAS in C. fluminea and sorption to sediment. C. fluminea bioaccumulated two PFAS not found in the other mediums. Perfluoroalkyl carboxylic acids and short-chain compounds dominated in clam tissue, which contrasts with findings of accumulation of longer-chain and perfluorosulfonic acids in fish. These findings suggest the potential for using bivalves to complement other organisms to better understand the bioaccumulation of PFAS and their fate and transport in a freshwater ecosystem. Environmental ImplicationIn 2022, the EPA designated two specific per- and polyfluoroalkyl substances (PFAS) as hazardous. However, thousands more of these compounds are in our environment and are associated with various adverse health outcomes, such as cancer and endocrine disruption. Most exposure occurs through ingestion of contaminated food and drinking water. The site of this study includes one of two primary drinking water sources in Northern Virginia. This work offers a cost-effective and replicable method using invasive clams to detect and quantify PFAS. Identifying PFAS hot spots can inform stakeholders and policymakers how to prioritize remediation efforts to address environmental concerns.

Fabrication of molecularly imprinted carbon nanotubes integrating ionic liquids for efficient detection of perfluoroalkyl carboxylic acid in environmental water

It is extremely significant while challenging to accurately detect low-levels of perfluoroalkyl carboxylic acid compounds (PFCAs) in environmental water. Herein, adopting perfluorotetradecanoic acid as the dummy template, selective molecularly imprinted composites (CNTs@ILs@MIPs) grafted carbon nanotubes integrating hydrophilic ionic liquids were successfully prepared via surface imprinting and dummy-template imprinting techniques. The obtained CNTs@ILs@MIPs were applied as selective extraction adsorbent for specifically extract PFCAs in environmental water coupled with gas chromatography-mass spectrometry quantification. Detailed studies were conducted on the main preparation parameters and extraction conditions. The CNTs@ILs@MIPs displayed excellent adsorptivity, and the established method exhibited low LODs (0.60–1.64 ng L−1), wide linearity with R2 above 0.9994, and satisfactory adsorption recoveries (80.5–112.5%) for seven PFCAs. This proposed method provides a new applicable approach for the detection of targeted pollutants in environmental water by utilizing the high affinity and recognition ability of molecularly imprinted carbon nanotube functional materials modified with ionic liquids.

Removal of perfluoroalkyl acids (PFAAs) from aqueous solution by water hyacinth (Eichhornia crassipes): Uptake, accumulation, and translocation

Although Eichhornia crassipes, commonly known as water hyacinth, has been widely used in wastewater treatment, further investigations are still needed to explore the removal efficiency of perfluoroalkyl acids (PFAAs) from the aqueous environment using this floating aquatic plant. In this study, a hydroponic experiment was conducted to assess accumulation, bioconcentration factors (BCFs), translocation factors (TFs), and removal rates of eight PFAAs by water hyacinth. The obtained results indicated that all PFAAs, including five perfluoroalkyl carboxylic acids (PFCAs) with chain lengths C4-C8 and three perfluoroalkyl sulfonic acids (PFSAs) with C4, C6, and C8, were readily accumulated in water hyacinth. Throughout the duration of the experiment, there was a noticeable increase in PFAA concentrations and BCF values for different plant parts. For the root, PFAAs with more carbon numbers showed a higher uptake than the shorter homologues, with PFSAs being more readily accumulated compared to PFCAs with the same carbon number in the molecules. In contrast, the levels of long-chain PFAAs were comparatively lower than those of short-chain substances in the stem and leaf. Notably, PFAAs with less carbon numbers, like PFPeA, PFBA, and PFBS, showed a remarkable translocation from the root to the stem and leaf with TFs >1. For the whole plant, no significant correlation was found between BCFs and organic carbon-water partition coefficients (Koc), octanol-water partition coefficients (Kow), membrane-water distribution coefficients (Dmw), or protein-water distribution coefficients (Dpw). The removal rates of PFAAs ranged from 40.3 to 63.5 % throughout the three weeks of the experiment while the removal efficiencies varied from 48.9 % for PFHxS to 82.6 % for PFPeA in the last week.

Quantitative cross-species comparison of serum albumin binding of per- and polyfluoroalkyl substances from five structural classes.

Per- and polyfluoroalkyl substances (PFAS) are a class of over 8000 chemicals, many of which are persistent, bioaccumulative, and toxic to humans, livestock, and wildlife. Serum protein binding affinity is instrumental in understanding PFAS toxicity, yet experimental binding data is limited to only a few PFAS congeners. Previously, we demonstrated the usefulness of a high-throughput, in vitro differential scanning fluorimetry assay for determination of relative binding affinities of human serum albumin for 24 PFAS congeners from 6 chemical classes. In the current study, we used this assay to comparatively examine differences in human, bovine, porcine, and rat serum albumin binding of 8 structurally informative PFAS congeners from 5 chemical classes. With the exception of the fluorotelomer alcohol 1H, 1H, 2H, 2H-perfluorooctanol (6:2 FTOH), each PFAS congener bound by human serum albumin was also bound by bovine, porcine, and rat serum albumin. The critical role of the charged functional headgroup in albumin binding was supported by the inability of albumin of each species tested to bind 6:2 FTOH. Significant interspecies differences in serum albumin binding affinities were identified for each of the bound PFAS congeners. Relative to human albumin, perfluoroalkyl carboxylic and sulfonic acids were bound with greater affinity by porcine and rat serum albumin, and the perfluoroalkyl ether acid congener bound with lower affinity to porcine and bovine serum albumin. These comparative affinity data for PFAS binding by serum albumin from human, experimental model, and livestock species reduce critical interspecies uncertainty and improve accuracy of predictive bioaccumulation and toxicity assessments for PFAS.

Degradation of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water by use of a nonthermal plasma-ozonation cascade reactor: Role of different processes and reactive species

The widespread use of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in the last century has caused serious pollution of water bodies around the world, threatening the health of humans and other organisms. In this work, a novel cascade reactor configuration, comprised of a dielectric barrier discharge (DBD) plasma chamber connected with an ozonation chamber was used to treat municipal secondary effluent loaded with several PFAS. The electrical energy per order (EE/O) for degradation of perfluorooctanoic acid (PFOA) and perfluorodecanoic acid (PFDA) amounts 180 and 100 kWh/m3, respectively. While the short-chain PFAS (perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA)) were difficult to be degraded, i.e. degradation percentage < 32 % after 60 min, 80–90 % of the longer PFAS (PFOA and PFDA) were degraded within 60 min. The degradation of PFAS mainly occurred in the plasma chamber rather than in ozonation chamber. This is because that reductive species produced in plasma chamber, such as hydrated electrons (eaq−) and Ar+, played a direct role in defluorination, while oxidative species, including OH, O, O2−, 1O2, O3, and H2O2, has a very limited contribution for defluorination. Enhancing the utilization of reductive species is crucial to degrade PFAS. Perfluoroalkyl carboxylic acids (PFCA) generated during the plasma reactions may have a potential risk for environment. As such, further optimization should focus on full mineralization. This study provides an approach to solve the problem of PFAS-contaminated wastewater, which is of the importance to promote the application of nonthermal plasma technique in water treatment.

Removal of per- and polyfluoroalkyl substances from water by plasma treatment: Insights into structural effects and underlying mechanisms

Non-thermal plasma emerges as a promising technology for per- and polyfluoroalkyl substances (PFAS) decomposition due to its notable efficacy and environmentally friendly characteristics. In this study, we demonstrated the efficacy of a falling film dielectric barrier discharge (DBD) system for the removal of 10 PFAS, including perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs) and hexafluoropropylene oxide (HFPO) oligomer acids. Results showed that compounds with fluoroalkyl chain length>4 were effectively decomposed within 100 min, with long-chain PFAS demonstrating more pronounced removal performance than their short-chain analogues. The superior removal but low defluorination observed in HFPO oligomer acids could be ascribed to their ether-based structural features. The integration of experimental results with density functional theory (DFT) calculations revealed that the synergistic effects of various reactive species are pivotal to their efficient decomposition, with electrons, OH•, and NO2• playing essential roles. In contrast, the degradation of PFSAs was more dependent on electron attack than that of PFCAs and HFPO oligomer acids. Significantly, the most crucial degradation pathway for HFPO oligomer acids was the cleavage of ether CO, whether through radical or electron attack. Furthermore, the demonstrated effective removal in various water matrices showed the potential of the plasma system for removing PFAS in complex aquatic environments. This study provided mechanistic insights into PFAS degradation behavior in plasma processes, and it underscored the vital influence of molecular structures on degradability, thereby contributing to the further development and regulation of plasma-based technologies for treating PFAS in water.

Interfacial Activity and Surface pKa of Perfluoroalkyl Carboxylic Acids (PFCAs).

Perfluoroalkyl carboxylic acids (PFCAs) are widely used synthetic chemicals that are known for their exceptional stability and interfacial activity. Despite their industrial and environmental significance, discrepancies exist in the reported pKa values for PFCAs, often spanning three to four units. These disparities stem from an incomplete understanding of how pH influences the ionized state of PFCA molecules in the bulk solution and at the air-water interface. Using pH titration and surface tension measurements, we show that the pKa values of the PFCAs adsorbed at the air-water interface differ from the bulk. Below the equivalence point, the undissociated and dissociated forms of the PFCAs exist in equilibrium, driving to the spontaneous adsorption and reduced air-water surface tension. Conversely, above the equivalence point, the complete ionization of the headgroup into the carboxylate form renders PFCAs highly hydrophilic, resulting in reduced interfacial activity of the molecules. The distinction in the chemical environments at the interface and bulk results in differences in the pKa of PFCA molecules in the bulk phase and at the air-water interface. We explore the effects of the fluoroalkyl tail length of PFCAs on their surface pKa and interfacial activity across a broad pH range. We further demonstrate the influence of pH-dependent ionized state of PFCAs on their foamability and the rate of microdroplet evaporation, understanding of which is crucial for optimizing their industrial applications and developing effective strategies for their environmental remediation. This study underscores the potential significance of pH in directing the interfacial activity of PFCAs and prompts the inclusion of pH as a key determinant in the predictions of their fate and potential risks in the environment.

The effects of two short-chain perfluoroalkyl carboxylic acids (PFCAs) on northern leopard frog (Rana pipiens) tadpole development

Short-chain perfluoroalkyl carboxylic acids (PFCAs) have been detected in the environment globally. The presence and persistence of these compounds in the environment may lead to chronic wildlife exposure. We used northern leopard frog (Rana pipiens) tadpoles to investigate the chronic toxicity and the bioconcentration of two short-chain PFCAs, perfluorobutanoic acid (PFBA) and perfluorohexanoic acid (PFHxA). We exposed Gosner stage 25 tadpoles to PFBA and PFHxA (as individual chemicals) at nominal concentrations of 0.1, 1, 10, 100, and 1000 µg/L for 43–46 days. Tadpoles exposed to 0.1 to 100 µg/L of PFBA and PFHxA had significantly higher mean snout-to-vent lengths, mean masses, and scaled mass indexes than control tadpoles. These results indicate that exposure to short-chain PFCAs influences tadpole growth. Further investigation into the mechanism(s) causing the observed changes in tadpole growth is warranted. We observed a significantly higher proportion of males in the PFBA 1 µg/L treatment group, however further histological analyses are required to confirm visual sex identification before making concrete conclusions on the effects of PFCAs on amphibian sex ratios. PFBA concentrations in tissues were higher than PFHxA concentrations; a pattern that contrasts with previously published studies using fish, suggesting potential differences between taxa in PFBA and PFHxA bioconcentration. Bioconcentration factors were <10 L/kg wet weight, indicating low bioconcentration potential in tadpoles. Our results suggest that PFBA and PFHxA may have effects at environmentally-relevant concentrations (0.1–10 µg/L) and further investigation is required before these compounds can be deemed a “safe” alternative to their long-chain counterparts.

A quantum chemical investigation of the interaction of perfluoropropionic acid with monoethanolamine and sulfuric acid in the atmosphere

Perfluoroalkyl substances (PFASs) including Perfluoroalkyl acids (PFAAs), known for their chemical and thermal stability, are widely used in many industrial applications. However, their toxicity and bioaccumulative potential raise environmental and health concerns. PFAAs like Perfluoroalkyl carboxylic acids (PFCAs), detected in atmospheric aerosols, pose risks due to their long-range dispersion. Employing DFT we investigate the interactions of Perfluoropropionic acid (PFPA), a persistent organic pollutant, with atmospheric molecules like Sulfuric acid (SA) and monoethanolamine (MEA). Performing a systematic quantum-chemical analysis on structural and thermochemical properties of various ternary PFPA-SA-MEA clusters, we observe that PFPA forms stable hydrogen-bonded molecular clusters with SA and MEA which may facilitate its propagation in the atmosphere. The presence of both SA and MEA is essential to enhance the interaction capacity of PFPA in ambient condition as indicated by the calculated binding energies. A significant increase in scattering intensities of solar radiation is observed when PFPA forms clusters.

Visible‐Light‐Driven Four‐Component Radical Relay Aminocarbonylation of Unactivated Alkenes†

Comprehensive SummaryCatalytic four‐component radical carbonylation of unactivated alkenes has recently been recognized as a robust protocol for rapid construction of various structurally diverse carbonyl compounds. Given the significance of fluorine‐containing groups, this reaction class has been extensively applied to assembly of a variety of perfluoroalkyl carboxylic acid derivatives by transition metal catalysis. Herein, we report a visible‐light‐driven radical relay 1,2‐perfluoroalkylation aminocarbonylation of unactivated alkenes using CO gas as carbonyl source and 4CzIPN as organic photocatalyst. A wide range of alkenes and amines were well tolerated, providing the valuable β‐perfluoroalkylated amides with generally good yields and high chemoselectivity.

Tree barks for retrospective measurement and source appointment of airborne perfluoroalkyl and polyfluoroalkyl substances

Tree bark is a useful bioindicator of atmospheric pollution. It is specially suitable for airborne perfluoroalkyl and polyfluoroalkyl substances (PFASs) investigation due to persistence of ionic PFASs. The present work firstly systematically studied tree barks as a bioindicator of airborne PFASs. Comparison with the regular active and passive samplers found barks could produce long-term measurement of airborne PFASs, and could record the historical emission of PFASs with retrospective time frame as long as decades. Factors, e.g. tree type, trunk diameter, and sampling depth, can affect PFAS accumulation in barks, and these factors should be kept consistent during sampling. In a study area spatial distribution of airborne PFASs can be obtained by interpolation of bark results, and the concerned region can be located. Properties of the emission sources can be characterized, and the potential sources can be tracked based on the bark results. Their contributions can be further estimated by the source appointment strategies. In the economically and industrially developed study area of the present study, eight cities of southern Jiangsu Province of China, total ionic PFAS concentration of camphor bark samples collected in 34 sites was 0.44–359 ng/g dw (dry weight), dominated by perfluoroalkyl carboxylic acids (PFCAs). Two types of possible sources were characterized as with long-chained PFCAs and PFOA (perfluorooctanoic acid) as the main components respectively. The sources were appointed as fluoropolymer manufacturing and textile industries, the important PFAS application fields, and their relative contribution was estimated as 32.5% and 67.5% respectively. The present study can provide useful advice to the method framework of using barks for long-term occurrence investigation, concerned region location, and emission source appointment of airborne PFASs in a study area. Based on the bark results, effective strategies can be further made for PFAS pollution elimination and risk control.

Stability and Biotransformation of 6:2 Fluorotelomer Sulfonic Acid, Sulfonamide Amine Oxide, and Sulfonamide Alkylbetaine in Aerobic Sludge.

The 6:2 fluorotelomer sulfonamide (6:2 FTSAm)-based compounds signify a prominent group of per- and polyfluoroalkyl substances (PFAS) widely used in contemporary aqueous film-forming foam (AFFF) formulations. Despite their widespread presence, the biotransformation behavior of these compounds in wastewater treatment plants remains uncertain. This study investigated the biotransformation of 6:2 FTSAm-based amine oxide (6:2 FTNO), alkylbetaine (6:2 FTAB), and 6:2 fluorotelomer sulfonic acid (6:2 FTSA) in aerobic sludge over a 100-day incubation period. The biotransformation of 6:2 fluorotelomer sulfonamide alkylamine (6:2 FTAA), a primary intermediate product of 6:2 FTNO, was indirectly assessed. Their stability was ranked based on the estimated half-lives (t1/2): 6:2 FTAB (no obvious products were detected) ≫ 6:2 FTSA (t1/2 ≈28.8 days) > 6:2 FTAA (t1/2 ≈11.5 days) > 6:2 FTNO (t1/2 ≈1.2 days). Seven transformation products of 6:2 FTSA and 15 products of 6:2 FTNO were identified through nontarget and suspect screening using high-resolution mass spectrometry. The transformation pathways of 6:2 FTNO and 6:2 FTSA in aerobic sludge were proposed. Interestingly, 6:2 FTSAm was hardly hydrolyzed to 6:2 FTSA and further biotransformed to perfluoroalkyl carboxylic acids (PFCAs). Furthermore, the novel pathways for the generation of perfluoroheptanoic acid (PFHpA) from 6:2 FTSA were revealed.

Assessment of perfluorocarboxylic acids in fluorinated high-density polyethylene containers and estimation of potential non-cancer risks associated with anticipated use scenarios

High density polyethylene (HDPE) containers are fluorinated to impart barrier properties that prevent permeation of liquid products filled in the container. The process of fluorination may result in the unintentional formation of certain per- and polyfluoroalkyl substances (PFAS), specifically perfluoroalkyl carboxylic acids (PFCAs), as impurities. This study measured the amounts of PFCAs that may be present in the fluorinated HDPE containers, which could migrate into products stored in these containers. Migration studies were also conducted using water and mineral spirits to estimate the amount of PFCAs that might be found in the products stored in these containers. The migration results were used to conservatively model potential PFCA exposures from use of six product types: indoor-sprayed products, floor products, hand-applied products, manually-sprayed pesticides, hose-end sprayed products, and agricultural (industrial) pesticides. The potential that such uses could result in a non-cancer hazard was assessed by comparing the modeled exposures to both applicable human non-cancer toxicity values and environmental screening levels. Environmental releases were also compared to aquatic and terrestrial predicted no-effect concentrations (PNECs). The results of these analyses indicated no unreasonable non-cancer risk to humans, aquatic species, and terrestrial species from PFCAs in products stored in fluorinated HDPE containers.

External liquid calibration method for iodide chemical ionization mass spectrometry enables quantification of gas-phase per- and polyfluoroalkyl substances (PFAS) dynamics in indoor air.

Per- and polyfluoroalkyl substances (PFAS) are manufactured chemicals that have been detected across the globe. Fluorotelomer alcohols (FTOHs) are one PFAS class commonly found in indoor air due to emissions from consumer products (e.g., textiles and food packaging) and are human metabolic, atmospheric oxidative, and industrial precursors of perfluoroalkyl carboxylic acids (PFCAs). We developed a quantitative method for real-time analysis of gas-phase FTOHs, perfluoroalkyl acids (PFCAs and GenX), one perfluorooctane sulfonamide (EtFOSA), one fluorotelomer diol (FTdiOH), and one fluorinated ether (E2) using high-resolution time-of-flight chemical ionization mass spectrometry equipped with iodide reagent ion chemistry (I-HR-ToF-CIMS). Herein, we present a direct liquid injection method for external calibration, providing detection limits of 0.19-3.1 pptv for 3 s averaging and 0.02-0.44 pptv for 120 s averaging, with the exception of E2, which had detection limits of 1700 and 220 pptv for 3- and 120 s averaging, respectively. These calibrations enabled real-time gas-phase quantification of 6 : 2 FTOH in room air while microwaving popcorn, with an average peak air concentration of 31.6 ± 4.5 pptv measured 2 meters from a closed microwave. Additionally, 8 : 2 and 10 : 2 FTOH concentrations in indoor air were measured in the presence and absence of a rain jacket, with observed peak concentrations of 110 and 25 pptv, respectively. Our work demonstrates the ability of I-HR-ToF-CIMS to provide real-time air measurements of PFAS relevant to indoor human exposure settings and allow for PFAS source identification. We expect that real-time quantification of other gas-phase PFAS classes is possible, enabling advances in understanding PFAS sources, chemistry, and partitioning.

Characterization and dermal bioaccessibility of residual- and listed PFAS ingredients in cosmetic products.

As a large group of chemicals with diverse properties, per- and polyfluoroalkyl substances (PFAS) have found extensive application throughout consumer products, including cosmetics. Little is known about the importance of dermal uptake as a human exposure pathway for PFAS. Here we investigate a suite of listed-ingredient and residual PFAS in cosmetic products, along with their dermal bioaccessibility using in vitro incubations with artificial sweat. Concentrations of volatile listed ingredients (including cyclic perfluorinated alkanes, perfluorinated ethers, and polyfluorinated silanes) in three products ranged from 876-1323 μg g-1, while polar listed ingredients (i.e., polyfluoroalkyl phosphate esters [PAPs]) in a single product occurred at up to 2427 μg g-1 (6 : 2/6 : 2 diPAP)). Residual perfluoroalkyl carboxylic acids (PFCAs) were also measured at concentrations ranging from 0.02-29 μg g-1. When listed ingredients were included, our targeted analysis accounted for up to 103% of the total fluorine, while highlighting ambiguous and/or incorrect International Nomenclature of Cosmetic Ingredient (INCI) names used in several products. Bioaccessibility experiments revealed that residual PFCAs readily partitioned to artificial sweat (bioaccessible fractions ranging from 43-76% for detectable substances) while listed ingredients (i.e., PAPs and neutral/volatile PFAS) displayed negligible partitioning. This work provides new insight into the occurrence of PFAS in cosmetic products, while furthering our understanding on their mechanisms of dermal uptake.

Screening Novel Per- and Polyfluoroalkyl Substances in Human Blood Based on Nontarget Analysis and Underestimated Potential Health Risks.

Nontarget analysis has gained prominence in screening novel perfluoroalkyl and polyfluoroalkyl substances (PFASs) in the environment, yet remaining limited in human biological matrices. In this study, 155 whole blood samples were collected from the general population in Shijiazhuang City, China. By nontarget analysis, 31 legacy and novel PFASs were assigned with the confidence level of 3 or above. For the first time, 11 PFASs were identified in human blood, including C1 and C3 perfluoroalkyl sulfonic acids (PFSAs), C4 ether PFSA, C8 ether perfluoroalkyl carboxylic acid (ether PFCA), C4-5 unsaturated perfluoroalkyl alcohols, C9-10 carboxylic acid-perfluoroalkyl sulfonamides (CA-PFSMs), and C1 perfluoroalkyl sulfonamide. It is surprising that the targeted PFASs were the highest in the suburban population which was impacted by industrial emission, while the novel PFASs identified by nontarget analysis, such as C1 PFSA and C9-11 CA-PFSMs, were the highest in the rural population who often drank contaminated groundwater. Combining the toxicity prediction results of the bioaccumulation potential, lethality to rats, and binding affinity to target proteins, C3 PFSA, C4 and C7 ether PFSAs, and C9-11 CA-PFSMs exhibit great health risks. These findings emphasize the necessity of broadening nontarget analysis in assessing the PFAS exposure risks, particularly in rural populations.