Separation Of Peptides Research Articles

On the Separation of Peptides with Inverted Sequences

On the Separation of Peptides with Inverted Sequences

Design and investigation of novel iridoid-based peptide conjugates for targeting EGFR and its mutants L858R and T790M/L858R/C797S: an in silico study.

In this work, we designed novel peptide conjugates with plant-based iridoid and lichen-derived depside derivatives to target the wild-type EGFR (WT) and its mutants, L858R and T790M/L858R/C797S triple mutant. These mutations are often expressed in multiple cancers, particularly lung cancer. Specifically, the iridoids included 7-deoxyloganetic acid (7-DGA) and loganic acid (LG), while the depside derivative was sekikaic acid (SK). These compounds are known for their innate anticancer properties and were conjugated with two separate peptide sequences KLPGWSG (K) and YSIPKSS (Y). These sequences have been shown to target EGFR in previous phage display library screening, although the mechanism is unknown. Thus, we created the di-conjugates for dual targeting and investigated their interactions of the di-conjugates and that of the neat peptides with the kinase domain of EGFR (WT) and the two mutants using molecular docking, molecular dynamics (MD) simulations, and MM-GBSA analysis. Docking studies revealed that the (7-DGA)2-K showed the highest binding affinity at - 9.3kcal/mol with the L858R mutant, while (LG)2-Y displayed the highest binding affinity at - 9.0kcal/mol for the triple mutant receptor. Our results indicated that several of the conjugates interacted with crucial residues of the kinase domain, including ASP855 and THR854 (activation loop), MET793 and PRO794 (hinge region), ARG841 (catalytic loop), and LYS728 and LEU718 of the glycine-rich P-loop. Interestingly, strong hydrophobic interactions were also observed with the C-terminal tail residues, such as PHE997 and ALA1000 as well as with ARG999 for the YSIPKSS peptide and most of the conjugates. The hydroxyl group of the cyclopentane ring and the oxygen of the pyran ring of the (7-DGA)2-peptide conjugates contributed to binding particularly in the hinge region, while the peptide components formed an extended structure that bound well into the C-lobe. The (SK)2-Y di-conjugate and KLPGWSG peptide formed hydrogen bonds with the SER797 residue of the triple mutant. Overall, our results show that the (7-DGA)2-K, di-conjugate, the (7-DGA)2-Y di-conjugate, and the neat YSIPKSS demonstrated strong and stable binding with the L858R mutant and the highly resistant triple mutant EGFR, respectively. The novel designed conjugates demonstrate potential for further optimization for laboratory studies aimed at developing new therapeutics for targeting specific EGFR mutant expressing cells.

Greening Separation and Purification of Proteins and Peptides.

The increasing awareness of environmental issues and the transition to green analytical chemistry (GAC) have gained popularity among academia and industry in recent years. One of the principles of GAC is the reduction and replacement of toxic solvents with more sustainable and environmentally friendly ones. This review gives an overview of the advances in applying green solvents as an alternative to the traditional organic solvents for peptide and protein purification and analysis by liquid chromatography (LC) and capillary electrophoresis (CE) methods. The feasibility of using greener LC and CE methods is demonstrated through several application examples; however, there is still plenty of room for new developments to fully realize their potential and to address existing challenges. Thanks to the tunable properties of designer solvents, such as ionic liquids and deep eutectic solvents, and almost infinite possible mixtures of components for their production, it is possible that some new designer solvents could potentially surpass the traditional harmful solvents in the future. Therefore, future research should focus mainly on developing new solvent combinations and enhancing analytical instruments to be able to effectively work with green solvents.

Factors Affecting Liquid-Liquid Phase Separation of RGG Peptides with DNA G-Quadruplex.

Liquid-liquid phase separation (LLPS), mediated by G-quadruplexes (G4s) and intrinsically disordered proteins, particularly those containing RGG domains, plays a critical role in cellular processes and diseases. However, the molecular mechanism and the role of individual amino acid residues of the protein in LLPS with G4 (G4-LLPS) are still unknown. Here, we systematically designed peptides and investigated the roles of arginine residues in G4-LLPS. It was found that the FMRP-derived RGG peptide induced LLPS with G4-forming Myc-DNA, whereas a point-mutated peptide, in which all arginine residues were replaced with lysine, was unable to undergo LLPS, indicating the importance of arginine residues. Moreover, systematically truncated peptides showed that at least five positive net charges of peptide are required to induce G4-LLPS. Furthermore, quantitative investigation demonstrated that the higher binding affinity of peptides with G4 led to a higher LLPS ability, whereas threshold of the binding affinity for undergoing LLPS was identified. These insights elucidate the pivotal role of arginine in G4-LLPS and the specific requirement for multiple arginine residues, contributing to a deeper understanding of the complex interplay between intrinsically disordered proteins and nucleic acids.

Peptide retention time prediction for hydrophilic interaction liquid chromatography at acidic pH in formic-acid based eluents

Peptide separation selectivity was evaluated for hydrophilic interaction liquid chromatography (HILIC) ZIC-HILIC, ZIC-cHILIC, and XBridge Amide sorbents using formic acid as eluent additive (pH 2.7). Sequence-specific retention prediction algorithms were trained using retention datasets of ∼30,000 peptides for each column. Our retention models were able to attain ∼0.98 R2-value and yielded retention coefficients that can be probed to understand peptide-stationary phase interaction. Overall, the hydrophilicity for these columns decreased when the mobile phase changed pH from 4.5 to 2.7, when using 0.1 % formic acid in the mobile phase. The acidic residues became protonated, and the resultant hydrophilic interaction is dampened at the lower pH, leaving only the basic residues as the primary hydrophilic interactors. Hence, peptides of increasing charge have higher retention. In this comparison between the three columns, ZIC-HILIC has the highest chromatographic resolution between groups of peptides of different charge. From the position-dependent retention coefficients for ZIC-HILIC at pH 2.7, we found that the amino acids at the terminal positions of the peptide modulate the basicity of the N-terminal amino group or the C-terminal Arg/Lys for tryptic peptides. With respect to the separation orthogonality between HILIC and acidic pH RPLC for two dimensional separations, the orthogonality values were lower at pH 2.7 than operating HILIC at pH 4.5 for the first dimension. We also demonstrate that ZIC-HILIC was able to distinguish citrullinated and deamidated peptides based on predicted retention values.

Enzymatic Preparation, Identification by Transmembrane Channel-like 4 (TMC4) Protein, and Bioinformatics Analysis of New Salty Peptides from Soybean Protein Isolate.

To address the public health challenges posed by high-salt diets, this study utilized pepsin and flavourzyme for the continuous enzymatic hydrolysis of a soy protein isolate (SPI). The separation, purification, and identification of salt-containing peptides in SPI hydrolysate were conducted using ultrafiltration (UF), gel filtration chromatography (GFC), and Liquid Chromatography-Mass Spectrometry/Mass Spectrometry (LC-MS/MS). Subsequently, a molecular docking model was constructed between salt receptor protein transmembrane channel 4 (TMC4) and the identified peptides. Basic bioinformatics screening was performed to obtain non-toxic, non-allergenic, and stable salt peptides. After the enzymatic hydrolysis, separation, and purification of SPI, a component with a sensory evaluation score of 7 and an electronic tongue score of 10.36 was obtained. LC-MS/MS sequencing identified a total of 1697 peptides in the above component, including 84 potential salt-containing peptides. A molecular docking analysis identified seven peptides (FPPP, GGPW, IPHF, IPKF, IPRR, LPRR, and LPHF) with a strong theoretical salty taste. Furthermore, residues Glu531, Asp491, Val495, Ala401, and Phe405 of the peptides bound to the TMC4 receptor through hydrogen bonds, hydrophobic interactions, and electrostatic interactions, thereby imparting a significant salty taste. A basic bioinformatics analysis further revealed that IPHF, LPHF, GGPW, and IPKF were non-toxic, non-allergenic, and stable salt-containing peptides. This study not only provides a new sodium reduction strategy for the food industry, but also opens up new avenues for improving the public's healthy eating habits.

Efficient Production and Purification of Bioactive E50-52-ClassIIa Peptidic Bacteriocin Is Achieved through Fusion with the Catalytic Domain of Lysostaphin-Class III Bacteriocin.

E50-52, a class IIa-peptidic bacteriocin produced by a strain of Enterococcus faecium, has broad-spectrum antimicrobial activity against various foodborne pathogens. However, effective utilization of the E50-52 has been limited by low production yields and challenges associated with separation and purification of this 39-amino acid antimicrobial peptide. In this study, we have successfully produced a biologically active recombinant form of E50-52 by fusing it with the 16-kDa catalytic domain of lysostaphin-classIII bacteriocin (LssCAT), which resulted in high-yield production. Initially, the LssCAT-E50-52 chimeric protein was insoluble upon over-expression in Escherichia coli, but it became soluble using phosphate buffer (pH7.4) supplemented with 8M urea. Purification using immobilized-Ni2+ affinity chromatography under urea denaturing conditions resulted in consistent production a homogenous products (LssCAT-E50-52) with >95% purity. The purified protein was refolded using an optimized stepwise dialysis process. The resulting refolded LssCAT-E50-52 protein exhibited dose-dependent inhibitory activity against Helicobacter pylori, a Gram-negative, flagellated, helical bacterium that is associated with gastric cancer. Overall, the optimized protocol described in this study effectively produced large quantities of high-purity recombinant LssCAT-E50-52 protein, yielding approximately 100mg per liter of culture. To thebest of our knowledge, this is the first report on the impact of LssCAT-E50-52 on H.pylori. This finding could pave the way for further research into bactericidal mechanism and potential applications of this bacteriocin in biomedical industry.

Mitigating In-Column Artificial Modifications in High-Temperature LC-MS for Bottom-Up Proteomics and Quality Control of Protein Biopharmaceuticals.

Elevating the column temperature is an effective strategy for improving the chromatographic separation of peptides. However, high temperatures induce artificial modifications that compromise the quality of the peptide analysis. Here, we present a novel high-temperature LC-MS method that retains the benefits of a high column temperature while significantly reducing peptide modification and degradation during reversed-phase liquid chromatography. Our approach leverages a short inline trap column maintained at a near-ambient temperature installed upstream of a separation column. The retentivity and dimensions of the trap column were optimized to shorten the residence time of peptides in the heated separation column without compromising the separation performance. This easy-to-implement approach increased peak capacity by 1.4-fold within a 110 min peptide mapping of trastuzumab and provided 10% more peptide identifications in exploratory LC-MS proteomic analyses compared with analyses conducted at 30 °C while maintaining the extent of modifications close to the background level. In the peptide mapping of biopharmaceuticals, where in-column modifications can falsely elevate the levels of some critical quality attributes, the method reduced temperature-related artifacts by 66% for N-terminal pyroGlu and 63% for oxidized Met compared to direct injection at 60 °C, thus improving reliability in quality control of protein drugs. Our findings represent a promising advancement in LC-MS methodology, providing researchers and industry professionals with a valuable tool for improving the chromatographic separation of peptides while significantly reducing the unwanted modifications.

Rapid and simple dual extraction for the analysis of lipids and autoantigenic peptides within phosphatidylserine-liposomes

Autoimmune diseases are a major health concern in developed countries. Currently, only palliative treatments based on anti-inflammatories and immunosuppressors are available. A novel antigen-specific therapy that uses a physiological process of tolerance generation is being developed. This is plausible by using phosphatidylserine rich liposomes (PS-liposomes), which bio-mimic apoptotic cells, encapsulated with the autoantigen responsible of generating the autoimmunity. In this way, tolerance against the own cells or tissues that were considered hostile can be achieved. In addition, only by changing the encapsulated peptide, different autoimmune diseases can be treated. Efficacy of this approach was demonstrated in type I diabetes, rheumatoid arthritis, multiple sclerosis, and myasthenia gravis.In the regulatory pre-clinical phase, analytical methodologies to evaluate the quality of the product need to be developed. In this regard, identification and quantification of the encapsulated peptide and lipids are considered critical quality attributes. In this study, a rapid and simple liquid–liquid extraction procedure, based on Bligh-Dyer method, is described for dual extraction of peptides and lipids within PS-liposomes formulation. This single step allows the separation of lipids and the encapsulated peptide in two different phases. For the subsequent analysis, two different HPLC methods were developed. The organic phase, which contains the lipids was analysed by HPLC-ELSD, while the aqueous phase, containing the encapsulated peptide, was analysed by HPLC-UV. Both methods were also validated in terms of accuracy, precision, linearity, LOD and LOQ. The extraction procedure has demonstrated highly efficient separation of lipids and peptides, avoiding interferences between them in the quantification.

Advances in Therapeutic Peptides Separation and Purification

Advances in Therapeutic Peptides Separation and Purification

Isolation, identification, and chelation mechanism of ferrous-chelating peptide from peanut protein hydrolysate.

Peanut peptides can chelate iron but their chelation mechanism remains unclear. The purpose of this study is to separate peanut ferrous-chelating peptides and explore the chelation mechanism of peanut peptides with iron. Peanut peptide component F-122, which had a higher chelation rate, was separated using ultrafiltration, gel filtration chromatography, and ion exchange chromatography, achieving a ferrous chelation rate of 90.7%. Six peptide segments were screened and their amino acid sequences were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Spectral analysis confirmed that the chelation between peanut peptides and ferrous ions occurred and a new substance was formed. Molecular docking simulation indicated that the amino acids in peanut peptides involved in the chelating reaction were glutamic acid, arginine, glycine, threonine, phenylalanine, and lysine. The binding sites included the main chain oxygen atom, side chain oxygen atom, and carboxyl oxygen atom of amino acid. The isolated peanut peptide had a higher ferrous-chelation rate. The chelating mechanism of peanut peptide with ferrous ion was elucidated. This study provides a theoretical basis for the development of new peptide-ferrous preparations. © 2024 Society of Chemical Industry.

SMMP: A Deep-Coverage Marine Metaproteome Method for Microbial Community Analysis throughout the Water Column Using 1 L of Seawater.

Marine microbes drive pivotal transformations in planetary-scale elemental cycles and have crucial impacts on global biogeochemical processes. Metaproteomics is a powerful tool for assessing the metabolic diversity and function of marine microbes. However, hundreds of liters of seawater are required for normal metaproteomic analysis due to the sparsity of microbial populations in seawater, which poses a substantial challenge to the widespread application of marine metaproteomics, particularly for deep seawater. Herein, a sensitive marine metaproteomics workflow, named sensitive marine metaproteome analysis (SMMP), was developed by integrating polycarbonate filter-assisted microbial enrichment, solid-phase alkylation-based anti-interference sample preparation, and narrow-bore nanoLC column for trace peptide separation and characterization. The method provided more than 8500 proteins from 1 L of bathypelagic seawater samples, which covered diverse microorganisms and crucial functions, e.g., the detection of key enzymes associated with the Wood-Ljungdahl pathway. Then, we applied SMMP to investigate vertical variations in the metabolic expression patterns of marine microorganisms from the euphotic zone to the bathypelagic zone. Methane oxidation and carbon monoxide (CO) oxidation were active processes, especially in the bathypelagic zone, which provided a remarkable energy supply for the growth and proliferation of heterotrophic microorganisms. In addition, marker protein profiles detected related to ammonia transport, ammonia oxidation, and carbon fixation highlighted that Thaumarchaeota played a critical role in primary production based on the coupled carbon-nitrogen process, contributing to the storage of carbon and nitrogen in the bathypelagic regions. SMMP has low microbial input requirements and yields in-depth metaproteome analysis, making it a prospective approach for comprehensive marine metaproteomic investigations.

Separation and purification of antioxidant peptides from Idesia polycarpa Maxim. cake meal and study of conformational relationship between them

Separation and purification of antioxidant peptides from <i>Idesia polycarpa</i> Maxim. cake meal and study of conformational relationship between them

Evaluating C18 stationary phases with a positively charged surface for proteomic LC-MS applications using mobile phase acidified with reduced formic acid concentration

We have recently demonstrated the ability of a C18 stationary phase with a positively charged surface (PCS-C18) to provide superior chromatographic separation of peptides using mobile phase acidified with a mere 0.01 % formic acid, significantly improving MS sensitivity. Here, we examined three columns packed with different PCS-C18 phases using the MS-favorable mobile phase acidified with low formic acid concentrations to establish the impact of separation performance and better MS sensitivity on peptide identifications. The surface charge interaction was evaluated using the retention of nitrate. The highest interaction was observed for the AdvanceBio Peptide Plus column. A surface charge-dependent shift in the retention time of peptides was confirmed with a change in formic acid concentration in the mobile phase. The separation performance of the columns with MS-favorable mobile phase acidified with low concentrations of formic acid was evaluated using well-characterized peptides. The loading capacity was assessed using a basic peptide with three lysine residues. Good chromatographic peak shapes and high loading capacity were observed for the Acquity Premier CSH C18 column, even when using a mobile phase acidified with 0.01 % formic acid. The extent of improvement in peptide identification when using reduced formic acid concentration was evaluated by analyzing the tryptic digest of trastuzumab and tryptic digest of whole bacteria cell lysate. Each column provided improved MS signal intensity and peptide identification when using the mobile phase with 0.01 % formic acid. The ability of the Acquity Premier CSH C18 column to provide better separation of peptides, even with a reduced formic acid concentration in the mobile phase, boosted MS signal intensity by 65 % and increased the number of identified peptides from the bacterial sample by 19 %. Our study confirms that significant improvement in the proteomic outputs can be achieved without additional costs only by tailoring the chemistry of the stationary phase to the composition of the mobile phase. Our results can help researchers understand the retention mechanism of peptides on the PCS-C18 stationary phases using low-ionic strength mobile phases and, more importantly, select the best-suited stationary phases for their LC-MS proteomic applications.

Retraction of "Soft Nanotubes Derivatized with Short PEG Chains for Thermally Controllable Extraction and Separation of Peptides".

[This retracts the article DOI: 10.1021/acsomega.7b00838.].

An enrichment strategy based on hydrophobic tagging and reversed-phase chromatographic separation for the analysis of lysine-containing peptides

Lysine (K) is widely used in the design of lysine-targeted crosslinkers, structural elucidation of protein complexes, and analysis of protein-protein interactions. In "shotgun" proteomics, which is based on liquid chromatography-tandem mass spectrometry (LC-MS/MS), proteins from complex samples are enzymatically digested, generating thousands of peptides and presenting significant challenges for the direct analysis of K-containing peptides. In view of the lack of effective methods for the enrichment of K-containing peptides, this work developed a method which based on a hydrophobic-tag-labeling reagent C10-S-S-NHS and reversed-phase chromatography (termed as HYTARP) to achieve the efficient enrichment and identification of K-containing peptides from complex samples. The C10-S-S-NHS synthesized in this work successfully labeled standard peptides containing various numbers of K and the labeling efficiency achieved up to 96% for HeLa cell protein tryptic digests. By investigating the retention behavior of these labeled peptides in C18 RP column, we found that most K-labeled peptides were eluted once when acetonitrile percentage reached 57.6% (v/v). Further optimization of the elution gradient enabled the efficient separation and enrichment of the K-labeled peptides in HeLa digests via a stepwise elution gradient. The K-labeled peptides accounted for 90% in the enriched peptides, representing an improvement of 35% compared with the number of peptides without the enrichment. The dynamic range of proteins quantified from the enriched K-containing peptides spans 5-6 orders of magnitude, and realized the detection of low-abundance proteins in the complex sample. In summary, the HYTARP strategy offers a straightforward and effective approach for reducing sample complexity and improving the identification coverage of K-containing peptides and low-abundance proteins.

Multicolumn Nanoflow Liquid Chromatography with Accelerated Offline Gradient Generation for Robust and Sensitive Single-Cell Proteome Profiling.

Peptide separations that combine high sensitivity, robustness, peak capacity, and throughput are essential for extending bottom-up proteomics to smaller samples including single cells. To this end, we have developed a multicolumn nanoLC system with offline gradient generation. One binary pump generates gradients in an accelerated fashion to support multiple analytical columns, and a single trap column interfaces with all analytical columns to reduce required maintenance and simplify troubleshooting. A high degree of parallelization is possible, as one sample undergoes separation while the next sample plus its corresponding mobile phase gradient are transferred into the storage loop and a third sample is loaded into a sample loop. Selective offline elution from the trap column into the sample loop prevents salts and hydrophobic species from entering the analytical column, thus greatly enhancing column lifetime and system robustness. With this design, samples can be analyzed as fast as every 20 min at a flow rate of just 40 nL/min with close to 100% MS utilization time and continuously for as long as several months without column replacement. We utilized the system to analyze the proteomes of single cells from a multiple myeloma cell line upon treatment with the immunomodulatory imide drug lenalidomide.

The path forward for protein footprinting, covalent labeling, and mass spectrometry-based protein conformational analyses.

Mass spectrometry-based approaches to assess protein conformation have become widely utilized due to their sensitivity, low sample requirements, and broad applicability to proteins regardless of size and environment. Their wide applicability and sensitivity also make these techniques suitable for the analysis of complex mixtures of proteins, and thus, they have been applied at the cell and even the simple organism levels. These works are impressive, but they predominately employ "bottom-up" workflows and require proteolytic digestion prior to analysis. Once digested, it is not possible to distinguish the proteoform from which any single peptide is derived and therefore, one cannot associate distal-in primary structure-concurrent post-translational modifications (PTMs) or covalent labels, as they would be found on separate peptides. Thus, analyses via bottom-up proteomics report the average PTM status and higher-order structure (HOS) of all existing proteoforms. Second, these works predominately employ promiscuous reagents to probe protein HOS. While this does lead to improved conformational resolution, the formation of many products can divide the signal associated with low-copy number proteins below signal-to-noise thresholds and complicate the bioinformatic analysis of these already challenging systems. In this perspective, I further detail these limitations and discuss the positives and negatives of top-down proteomics as an alternative.

Molecular dynamics simulation on regulation of liquid–liquid phase separation of repetitive peptides

Understanding the intricate interactions governing protein and peptide behavior in liquid–liquid phase separation (LLPS) is crucial for unraveling biological functions and dysfunctions. This study employs a residue-leveled coarse-grained molecular dynamics approach to simulate the phase separation of repetitive polyproline and polyarginine peptides (poly PR) with varying lengths and sequences in solution, considering different concentrations and temperatures. Our findings highlight the crucial role of sequence order in promoting LLPS in peptides with identical lengths of repetitive sequences. Interestingly, repetitive peptides containing fewer than 10 polyarginine repeats exhibit no LLPS, even at salt concentrations up to 3 M. Notably, our simulations align with experimental observations, pinpointing a salt concentration of 2.7 M for PR25-induced LLPS. Utilizing the same methodology, we predict the required salt concentrations for LLPS induction as 1.2 M, 1.5 M, and 2.7 M for PR12, PR15, and PR35, respectively. These predictions demonstrate good agreement with experimental results. Extending our investigation to include the peptide glutamine and arginine (GR15) in DNA solution, our simulations mirror experimental observations of phase separation. To unveil the molecular forces steering peptide phase separation, we introduce a dielectric constant modifier and hydrophobicity disruptor into poly PR systems. Our coarse-grained analysis includes an examination of temperature effects, leading to the inference that both hydrophobic and electrostatic interactions drive phase separation in peptide systems.

Chemical modification, structure elucidation and antifungal mechanism studies of a peptide extracted from garlic (Allium sativum L.).

Garlic is a promising source of antimicrobial peptide separation, and chemical modification is an effective method for activity improvement. The present study aimed to improve the antifungal activity of a peptide extracted from garlic. Chemical modifications were conducted, and the structure-activity relationship and antifungal mechanism were investigated. The results indicated that the cationic charge induced by Lys residue at the N-terminal was important for the antimicrobial activity, and the modified sequence exhibited significant antifungal activity with low mammalian toxicity and a low tendency of drug resistance (p < 0.05). The structure-activity relationship analysis revealed that the modified active peptide had a predominant α-helical structure and an inner cyclic correlation. Transcriptomic analysis showed that peptide KMLKKLFR (Lys-Met-Leu-Lys-Lyse-Leu-Phe-Arg) affected the rRNA processing and carbon metabolism process of Candida albicans. In addition, the membrane potential study indicated a non-membrane destruction mechanism, and molecular docking analysis and a DNA interaction assay suggested promising inner targets. The results of the present study indicate that chemical modification by amino acid substitution was effective for antimicrobial activity improvement. The present study would benefit future antimicrobial peptide development and suggests that garlic is a great source of antibacterial peptides and peptide template separations for coping with antibiotic resistance. © 2024 Society of Chemical Industry.