Pentachlorophenol Research Articles

Polyethylene microplastic modulates the toxicity of pentachlorophenol to the microalgae Isochrysis galbana, clone t-ISO

Pentachlorophenol (PCP) and polyethylene microplastic (PE-MP) have been designated as emerging and persistent pollutants, respectively. The combined effects of those pollutants are still unknown, especially to organisms like phytoplankton that may adsorb to their surface. Therefore, the purpose of this study was to investigate for the first time the effects of PE-MP alone and in combination with PCP on the microalgae Isochrysis galbana, clone t-ISO following 72 h of exposure. Photosynthetic pigments amounts, carotenoid, protein, carbohydrate and fatty acids have been assessed. Acute toxicity test showed that the 72 h median inhibition concentration (72 h-EC50) was 148.2, 0.66 and 087 mg L−1 for PE-MP, PCP and their mixture. The utmost effects in growth inhibition rates were noted with 0.5 and 1.25 mg L−1 PCP (23% and 85%, respectively), and 100 and 300 mg L−1 PE-MP (49% and 64%, respectively). Moreover, it was found that those concentrations had a major impact on the photosynthetic pigments, protein, carbohydrate, and fatty acids amounts in algal cells. Furthermore, levels of H2O2 and Malondialdehyde (MDA), as well as the activities of catalase (CAT), superoxide dismutase (SOD), and ascorbate peroxidase (APX), indicated the induction of an oxidative stress in algal cells. It appears that adding PE-MP at a no-effect concentration (25 mg L−1) reduces the toxicity caused by PCP due to its adsorption to polyethylene microplastics.

Assessing plasmatic transport inhibitors of thyroid hormone in mammals in the Xenopus Eleutheroembryonic Thyroid Assay (XETA).

The Xenopus Eleutheroembryonic Thyroid Assay (XETA, OECD TG 248) was established as an alternative to the Amphibian Metamorphosis Assay (AMA, OECD TG 231) for the analysis of (anti-)thyroid activity of chemicals. The XETA is a New Approach Method (NAM) since the embryonic life stages used in the assay are not yet feeding independently, which renders the assay to be considered a non-animal test under many national laws. Physiologically, the used embryos are not fully developed yet, and thus there are limitations to the XETA for detecting certain mechanisms along the hypothalamic-pituitary-thyroid (HPT) axis. However, the plasmatic transport inhibition of thyroid hormone should physiologically be detectable in the XETA but has not yet been sufficiently investigated. Here, we tested three substances that are known, amongst others, to inhibit thyroid hormone transport by competitive binding to transthyretin in mammalian studies, namely pentachlorophenol (PCP), tetrabromo bisphenol A (TBBPA), and mefenamic acid. Following the test guideline, X. laevis eleutheroembryos of Nieuwkoop-Faber stage 45 were exposed for 72h at 21°C in 6-well plates to different concentrations of the test substances. For PCP and TBBPA, the XETA showed a decrease in fluorescence intensity, which would be expected for thyroid hormone transport inhibition amongst other, similar modes of action, while for the lower potency substance mefenamic acid, a trend was visible, but no statistically significant inhibition was detected. Overall, the results indicate that in the XETA, the plasmatic transport inhibition of thyroid hormone should be detectable alongside other inhibitory modes of action on the HPT axis.

Identifying childhood pesticide exposure trajectories and critical window associated with behavioral problems at 10 years of age: Findings from SMBCS

BackgroundPesticides may impact children’s neurodevelopment. As children’s metabolic function and neural plasticity change throughout their growth and development, the effects of pesticide exposure may also vary. ObjectivesWe aimed to identify the trajectories of combined pesticide exposure during childhood, and examine the associations of the exposure trajectories with children’s neurobehavior at the age of 10. MethodsWe involved repeated measurements of three pesticide metabolites [Pentachlorophenol (PCP), 3,5,6-Trichloro-2-pyridinol (TCPy), and Carbofuran phenol (CFP)], in urine samples collected from children in a cohort study at ages 1, 2, 3, 6, 7, 8, 9, and 10 years. The group-based multi-trajectory model (GBMT) and latent class analysis (LCA) were separately utilized to describe the distinct trajectories and patterns of pesticide mixture exposure during childhood. Meanwhile, the Strengths and Difficulties Questionnaire (SDQ) and attention deficit hyperactivity disorder (ADHD) Criteria of Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) list were applied to assess behavioral disorders in children. The associations between exposure trajectories and behavioral problem scores were then examined. ResultsThe GBMT model delineated three distinct trajectories of combined pesticide exposure among children: consistently low, higher levels in early childhood transitioning to lower levels during pre-school age, and lower levels in early childhood followed by higher levels in the middle childhood. The LCA model identified three similar longitudinal exposure patterns. Further, the children in the second trajectory group identified by GBMT, characterized by higher early childhood exposure levels, exhibited significantly elevated hyperactivity/inattention scores of the SDQ compared to the other two groups (β = 0.46, 95 %CI: 0.11, 0.81; β = 0.44, 95 %CI: 0.02, 0.86). ConclusionsOur study revealed that exposure to pesticides during early childhood (especially before the age of two), rather than other age periods, was linked to hyperactivity/inattention problems in children aged 10 years. We also provided a novel perspective on characterizing the fluctuation in repeated measurements of multiple environmental chemicals and identifying the potential critical windows.

Removal mechanisms of pentachlorophenol in a horizontal-flow anaerobic immobilized biomass reactor (HAIB) inoculated with an indigenous estuarine sediment microbiota: adsorption and biodegradation processes.

Pentachlorophenol (PCP) is a highly toxic and carcinogenic compound with significant environmental impact, necessitating effective treatment technologies. This study evaluates PCP removal mechanisms, including adsorption and biodegradation, during the startup of a horizontal-flow anaerobic immobilized biomass reactor (HAIB), and examines the impact of PCP concentration on microbial diversity using denaturing gradient gel electrophoresis (DGGE). The primary mechanism for PCP removal in the HAIB was adsorption, effectively described by the Freundlich isotherm model. Adsorption efficiency ranged from 86 to 104% for PCP concentrations between 0.2 and 5.0mg/L, and 46% to 64% for concentrations between 0.098 and 0.05mg/L. Additionally, PCP degradation intermediates such as 2,3-DCP and 2,6-DCP were detected, indicating that biodegradation also occurred in the HAIB. Organic matter degradation averaged 81 ± 9%, and methane content in the biogas averaged 46 ± 9%, confirming the anaerobic process. No inhibition of microbial activity was observed due to PCP toxicity, even at a PCP load of 5mg PCP/g STV per day. While the archaeal community showed only slight changes, with similarity coefficients ranging from 88 to 95%, the bacterial community was significantly affected by PCP, with similarity coefficients ranging from 18 to 50%. Bacterial groups were responsible for the initial PCP degradation, while the archaeal community was involved in metabolizing the resulting byproducts. The use of indigenous inoculum from the Santos-São Vicente estuary demonstrated its potential for effective PCP removal. Polyurethane foam proved to be an effective support material, enhancing the adsorption process and reducing PCP toxicity to the microbial consortium. This study provides valuable insights into PCP adsorption and biodegradation mechanisms in HAIB, highlighting the effectiveness of indigenous inoculum and polyurethane foam for PCP removal.

Surface Treatment of Oak Wood with Silica Dioxide Nanoparticles and Paraloid B72

Wood is a valuable material with incomparable advantages, though it is susceptible to biotic and abiotic factors action that affect it adversely and shorten its service life. In the current study, the surface modification of oak wood is carried out through brief immersion in a solution of acrylic polymer Paraloid B72, in which silica dioxide nanoparticles in the form of nanopowder were dissolved at different contents (1, 2, 3, and 4% w/v of the solution) aiming at the elimination of wood material hygroscopicity, and the protection and improvement of other properties. Specifically, the modified and unmodified wood specimens were characterized in terms of physical characteristics (density, equilibrium moisture content, colour, and surface roughness), hygroscopic properties (swelling and absorption percentage) and accelerated weathering performance using xenon light and cycles of moisturizing and drying. The results revealed the dimensional stability of the samples and a significant increase in the hydrophobicity of the modified wood, as well as a significant increase in the resistance to the ageing/weathering factors of oak wood, which was proportional to the increase in the presence of nanoparticles in the Paraloid B72 solution. The colour of the treated samples slightly changed towards darker shades, more reddish and yellowish (with L* to decrease, while a* and b* to slightly increase), though the treated wood revealed higher colour stability. The surface roughness parameters (Ra, Rq, and Rz) increased significantly, restricting the wide application of the treated wood in indoor or outdoor applications where surface roughness constitutes a critical factor. The findings of the current work contribute not only to the production of longer-lasting wood and timber structures, but also to the conservation of the existing weathered heritage timber structures.

Lethal disruption of the bacterial gut community in Eastern subterranean termite caused by boric acid.

The Eastern subterranean termite, Reticulitermes flavipes (Kollar) (Blattodea: Rhinotermitidae), is a significant pest, causing extensive damage to structures that amount to substantial economic losses. Boric acid is widely used for wood preservation due to its stability and broad-spectrum insecticidal properties, yet its impact on termite gut microbiomes and the implications of such effects remain understudied. Our study evaluates the dose-dependent mortality of R. flavipes upon being provided boric acid treated filter papers and investigates the resulting dysbiosis within the termite gut microbiome. Consistent with reports from other insects, mortality increased in a dose-dependent manner, with the highest boric acid concentration (203.7 µg/cm2 of filter paper) significantly reducing termite survival. 16S rRNA gene sequencing of the gut bacterial microbiome revealed notable shifts in composition, indicating boric acid-induced dysbiosis. Aside from an overall decrease in bacterial diversity, the relative abundance of some symbionts essential for termite nutrition decreased in response to higher boric acid concentrations, while several opportunistic pathogens increased. Our findings extend the understanding of boric acid's mode of action in termites, emphasizing its ability to significantly modulate the bacterial symbiont community, which can have dire effects on termite biology. Considering its ability to protect wood from further termite consumption, our study supports the continued use of boric acid and related compounds for termite-resistant treatments for wood.

Wood treatment by inorganic alumino-silicate polymers

AbstractThis work assesses the effectiveness of dilute inorganic alumino-silicate polymer suspensions in enhancing wood’s durability, fire resistance, and mechanical properties. Alumino-silicate polymer-treated wood exposed to Coniophora puteana lost less than 3% mass on average, compared to 20% for controls. The moduli of elasticity and rupture of treated specimens were nearly twice as high as those of the controls. Coating with the inorganic polymer was also effective as a fire retardant. Results indicate that inorganic alumino-silicate polymers are a very promising wood treatment.

Chemically Pretreated Densification of Juniper Wood for Potential Use in Osteosynthesis Bone Implants.

The aim of the study was to perform treatment of juniper wood to obtain wood material with a density and mechanical properties comparable to bone, thus producing a potential material for use in osteosynthesis bone implants. In the first step, partial delignification of wood sample was obtained by Kraft cooking. The second step was extraction with ethanol, ethanol-water mixture, saline, and water to prevent the release of soluble compounds and increase biocompatibility. In the last step, the thermal densification at 100 °C for 24 h was implemented. The results obtained in the dry state are equivalent to the properties of bone. The swelling of chemically pre-treated densified wood was reduced compared to chemically untreated densified wood. Samples showed no cytotoxicity by in vitro cell assays. The results of the study showed that it is possible to obtain noncytotoxic wood samples with mechanical properties equivalent to bones by partial delignification, extraction, and densification. However, further research is needed to ensure the material's shape stability, water resistance, and reduced swelling.

Surfactant-mediated enhancement of liquid permeability in scots pine wood

Scots pine (Pinus sylvestris L.) is a widely-used wood species in construction and exterior applications. However, inherently low liquid permeability of wood presents substantial challenges to processing efficiency. In order to improve the liquid permeability in Scots pine, the effect of two different surfactants including dodecyl dimethyl ammonium chloride (DDAC) and primary alcobol ethoxylate (JFC-U) were investigated in this study. The mechanism was unveiled by microscopic observation, chemical analysis of extractive composition, and molecular dynamics (MD) simulations. The results demonstrated that both surfactants increased the liquid absorption in Scots pine by 14.7–46.3 % within 0.5 h. This effect was mainly attributed to the surfactants' capability to enhance surface wetting and dissolve extractives deposited on pit membrane in Scots pine wood. DDAC outperformed JFC-U in dissolving extractives. The MD simulations between DDAC and stearic acid (a representative extractive) illustrated that DDAC could envelope stearic acid molecules and form micellar structures through the strong intermolecular forces between them. These findings provide valuable insights into the effect and mechanisms by which surfactants enhance liquid permeability in extractive-rich wood, therefore, to support the development of efficient wood treatment technologies.

Color Change of Pear Wood (Pyrus communis L.) during Water Steam Treatment

Hydrothermal treatment of wood, particularly steaming with saturated water steam, is often used to achieve a more intensive and homogenous wood color or to vary its hue. However, information on pear wood (Pyrus communis L.) steaming is limited in the available literature. This paper investigates the influence of steaming on the color of pear wood. Green, water-saturated samples of pear wood heartwood and sapwood were steamed with saturated water steam for 24 h at 98 °C. The color of the heartwood and sapwood was assessed both visually and with a standard three-stimulus colorimeter using the CIEL*a*b* system, and compared to the natural color of pear-wood. Additionally, FT-IR spectrometry was employed to analyze chemical changes in the wood samples. The results showed that both heartwood and sapwood experienced a decrease in lightening (L*), an increase in redness (a*), and a decrease in yellowness (b*) during steaming. Furthermore, a trend toward the equalization of L*, a*, and b* parameters between heartwood and sapwood over time was observed. FT-IR spectroscopy revealed that the chemical changes during steaming were primarily related to extractives and hemicelluloses, with no significant changes in cellulose and lignin. The obtained results suggest that pear wood color can be equalized to some extent by steaming and that the extent of the color change to darker tones is dependent on steaming time.

Pentachlorophenol Exposure Delays the Recovery of Colitis in Association With Altered Gut Microbiota and Purine Metabolism.

Pentachlorophenol (PCP) was used widely as preservative and biocide and has been banned due to with various harmful effects, such as carcinogenicity and teratogenicity. However, the effects of PCP on colitis induced by dextrose sodium sulfate (DSS) remain largely unknown. Serum metabolomics and gut microbiota were investigated to elucidate the underlying mechanisms. Exposure to 20 μg/L PCP aggravated DSS-induced body weight loss, colon shortening, severe histological injuries, and upregulation of TNFα, iNOS, IL-1β, and IL-6. Serum metabolomics showed that both DSS and PCP could significantly disrupted tryptophan metabolism in normal mice. Interestingly, PCP exposure intensified the disturbance in purine metabolism but not tryptophan metabolism caused by DSS. Quantitative analysis of tryptophan and metabolites further confirmed that PCP exposure significantly increased the serum contents of serotonin, adenine, guanine, guanosine, inosine monophosphate (IMP), inosine, and hypoxanthine in DSS-treated mice. The overall gut microbial community was significantly modified by PCP and DSS treatment alone. Rikenellaceae_RC9_Gut_group, Colidextribacter, and Desulfovibrio were more abundant in colitis mice following PCP exposure. Further integrative analysis of differential bacteria and purine metabolites highlighted a significant correlation between Desulfovibrio and several purine metabolites, including guanine, guanosine, hypoxanthine, IMP, and inosine. Adenosine ribonucleotides de novo biosynthesis, inosine-5'-phosphate biosynthesis I, and urate biosynthesis/inosine 5'-phosphate degradation pathways were depleted in colitis mice upon PCP treatment. Taken together, PCP exposure delayed the recovery of colitis induced by DSS in association with altered gut microbiota and serum metabolites, which were enriched in tryptophan and purine metabolism.

Fabrication and characterization of poly(methyl vinyl ether maleic anhydride) blended poly(lactic acid) ultrafiltration membrane with upgraded antifouling and separation performance

In this present study, a novel environment-friendly bio-polymeric hybrid ultrafiltration membrane was fabricated by incorporating poly(methyl vinyl ether maleic anhydride) (PMVEAMA) into the poly(lactic acid) (PLA) polymer matrix. The integration of PMVEAMA into PLA significantly altered the membrane's structural morphology, functional characteristics, and filtration performance. As a result, key functional parameters like membrane porosity and water content were increased, which exhibiting the improved hydrophilicity. Furthermore, the molecular weight cut-off of the PLA/PMVEAMA membrane reached up to a maximum of 66.5 KDa with an average pore size of 9.14 nm, subsequently improving the flux of the membrane up to 2.8 times than PLA membrane. The functional capacity of the synthesized membrane was further assessed by testing its ability to filter toxic chlorophenolic compounds. Rejection studies reveal that the PLA/PMVEAMA membrane achieved a rejection efficiency of 44.64 % pentachlorophenol (PCP) and 51.85 % 2,4-dichlorophenol (DCP). Moreover, fouling studies revealed enhanced PCP and DCP flux recovery ratios of 50.94 % and 51.40 %, respectively, with a significant reduction in the flux decline rate. Additionally, the synthesized PLA/PMVEAMA membranes improved stability and regenerative properties up to 12 filtration cycles and antifouling properties highlight its potential to filter chlorophenolic compounds from wastewater.

Effect of alkali treatment and fungal degradation on the nanostructure and cellulose arrangement in Scots pine cell walls – A neutron and X-ray scattering study

Research on new conservation treatments for historical wood requires considerable amounts of appropriate wood material, which is hard to acquire. Thus, we produced biologically and chemically degraded model wood that could be used as a representative material in future research on consolidating agents. Using chemical composition determinations, we found that fungal decay targeted mainly polysaccharides, while alkaline treatment mostly reduced hemicelluloses and lignin content. X-ray and neutron scattering showed that all decayed samples had increased disorder in microfibril alignment and larger elementary fibril cross-sections, and alkaline-treated samples had much larger elementary fibril spacing compared to those decayed by fungi. These nanoscale and chemical differences correlate with physical property changes. For example, decreased cellulose crystallinity and increased disorder of the microfibrils in degraded cell walls likely contribute to the lower elastic moduli measured for these cell walls. The obtained data improves understanding of how degradation alters wood structures and properties across length scales and will be valuable for future studies focusing on archeological wood. Moreover, it leads to the conclusion that it is more appropriate to develop treatments that consider not only spatial variability and degree of wood degradation but also the corresponding molecular and nanoscale changes in the cell walls.

Post-synthetic modification fluorescence UiO-66-Eu immunochromatography for high-performance detection of sodium pentachlorophenoate

Sodium pentachlorophenate (PCP) is widely used as a herbicide, fungicide, or molluscicide. It is highly toxic, easily soluble in water, making it highly prone to diffusion and causing water and soil pollution. Through the food chain, it enters animal bodies and remains in food, causing toxicity to humans and animals. Therefore, establishing a rapid and simple detection method for PCP is crucial for human health and environmental protection. Herein, lanthanide metal Eu3+ was introduced into UiO-66-(COOH)2 by post-synthesis modification, and the nanomaterials prepared based on this method have the advantages of both UiO-66-(COOH)2 and Eu3+. The rigid skeleton structure of UiO-66-(COOH)2 can protect the activity of antibody, the detection environment pH tolerance range of UiO-66-Eu is 3–11. While Eu3+ has long fluorescence lifetime, high fluorescence intensity, high signal-to-noise ratio, and low photobleaching rate. UiO-66-Eu-based immunochromatography assay was successfully applied in PCP detection with the detection limits of 0.84, 0.98, and 0.37 μg/kg for pork, chicken, and shrimp, respectively, which was up to 10-fold more sensitive than the reported ICAs. The recoveries ranged from 79.7 %−113.1 %, with the coefficient of variation from 6.6 %−17.1 %. Parallel detection of 30 samples by LC-MS/MS showed a good correlation with that of our proposed method (R2 >0.98). This work not only provides a creative attempt for UiO-66-Eu based highly sensitive and strongly tolerant ICAs, but also guarantees human health and environmental protection.

Pentachlorophenol impairs the antimicrobic capability of blood clam via undermining humoral immunity and disrupting humoral-cellular crosstalk

Due to past massive usage and persistent nature, pentachlorophenol (PCP) residues are prevalent in environments, posing a potential threat to various organisms such as sessile filter-feeding bivalves. Although humoral immunity and its crosstalk with cellular one are crucial for the maintaining of robust antimicrobic capability, little is known about the impacts of PCP on these critical processes in bivalve mollusks. In this study, pathogenic bacterial challenge and plasma antimicrobic capability assays were carried out to assess the toxic effects of PCP on the immunity of a common bivalve species, blood clam (Tegillarca granosa). Moreover, the impacts of PCP-exposure on the capabilities of pathogen recognition, hemocyte recruitment, and pathogen degradation were analyzed as well. Furthermore, the activation status of downstream immune-related signalling pathways upon PCP exposure was also assessed. Data obtained illustrated that 28-day treatment with environmentally realistic levels of PCP resulted in evident declines in the survival rates of blood clam upon Vibrio challenge along with markedly weakened plasma antimicrobic capability. Additionally, the levels of lectin and peptidoglycan-recognition proteins (PGRPs) in plasma as well as the expression of pattern recognition receptors (PRRs) in hemocytes were found to be significantly inhibited by PCP-exposure. Moreover, along with the downregulation of immune-related signalling pathway, markedly fewer chemokines (interleukin 8 (IL-8), IL-17, and tumor necrosis factor α (TNF-α)) in plasma and significantly suppressed chemotactic activity of hemocytes were also observed in PCP-exposed blood clams. Furthermore, compared to that of the control, blood clams treated with PCP had markedly lower levels of antimicrobic active substances, lysozyme (LZM) and antimicrobial peptides (AMP), in their plasma. In general, the results of this study suggest that PCP exposure could significantly impair the antimicrobic capability of blood clam via undermining humoral immunity and disrupting humoral-cellular crosstalk.

Interaction between Halogenated Phenols and Thyroxine‐Binding Protein: A Multispectral and Computational Approach

AbstractThe aim of this study was to understand the interaction between transthyretin (TTR) and halogenated phenols (HPs) including 2,4‐dichlorophenol (DCP), 2,4,6‐trichlorophenol (TCP), pentachlorophenol (PCP), 2‐bromophenol (2‐BP), 2,4‐dibromophenol (DBP) and 2,4,6‐tribromophenol (TBP). Computer simulation and multi‐spectroscopy techniques were used to investigate the interaction. The fluorescence of TTR was found to be quenched through static quenching and non‐radiative energy transfer by HPs, suggesting that the binding process between HPs and TTR was primarily influenced by van der Waals forces and hydrogen bonds. ANS substitution experiments indicated that HPs interacted with TTR at the T4 binding site. Three‐dimensional fluorescence spectra and Fourier transform infrared spectroscopy were used to investigate the conformational and microenvironmental changes of TTR resulting from the interactions with HPs. Additionally, molecular docking and reduced density gradient analysis were used to identify the specific residues and binding forces involved in the interaction between HPs and TTR binding sites. The findings were subsequently validated through quantum chemical analysis. This research integrates state‐of‐the‐art multispectral analytical methodologies with sophisticated computational modeling to introduce an innovative approach for dissecting the interactions between halogenated phenols (HPs) and transthyretin (TTR). This methodology offers a novel avenue for investigating the molecular interplay between HPs and TTR, thereby providing critical insights that are instrumental in assessing the latent toxicity of these compounds.

Impact of the Biocontrol Product, Esquive® WP, on the Indigenous Grapevine Wood Microbiome after a 6-Year Application Period.

Grapevine trunk diseases (GTDs) are currently limiting grapevine productivity in many vineyards worldwide. As no chemical treatments are registered to control GTDs, biocontrol agents are being tested against these diseases. Esquive® WP, based on the fungus Trichoderma atroviride I-1237 strain, is the first biocontrol product registered in France to control GTDs. In this study, we determine whether, following grapevine pruning wound treatments with Esquive® WP, changes occurred or not in the indigenous microbial communities that are colonizing grapevine wood. Over a 6-year period, Esquive® WP was applied annually to pruning wounds on three grapevine cultivars located in three different regions. Wood samples were collected at 2 and 10 months after the Esquive® WP treatments. Based on MiSeq high-throughput sequencing analyses, the results showed that specific microbial communities were linked to each 'region/cultivar' pairing. In certain cases, a significant modification of alpha diversity indexes and the relative abundance of some microbial taxa were observed between treated and non-treated grapevines 2 months after Esquive® WP treatment. However, these modifications disappeared over time, i.e., 10 months post-treatment. This result clearly showed that Esquive® WP pruning wood treatment did not induce significant changes in the grapevine wood's microbiome, even after 6 years of recurrent applications on the plants.

Effect of surfactants and implementation strategies for the pentachlorophenol degradation with Ni/Fe bimetallic nanoparticles in soil

Pentachlorophenol (PCP) removal was found to be dependent on many factors including soil surface charge, Ni/Fe nanoparticle (NP) dosage, pH, and types of surfactants. Desorption efficiencies of PCP from the contaminated soil treated with DI water, cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and Triton X-100 (TX-100) were 88.2%, 1.35%, 103%, and 80.9%, respectively. PCP desorption was significantly enhanced by anionic SDS but reduced by cationic CTAB. PCP desorption efficiency was governed by van der Waals attraction and electrostatic interaction among surfactants, soil particles, and Ni/Fe nanoparticles. For SDS-modified Ni/Fe NPs, SDS bilayers form on the positively charged Ni/Fe surface to sterically and electrostatically stabilize Ni/Fe and enhance the PCP removal efficiency of Ni/Fe in soil. However, an opposite effect was observed in the CTAB-modified Ni/Fe. In the soil slurry, CTAB was readily detached from Ni/Fe and subsequently form a CTAB bilayer on the soil surface to adsorb PCP at the soil surface that significantly reduce PCP degradation by blocking PCP from accessing the Ni/Fe reactive sites although the Ni/Fe-CTAB exhibited extremely high reactivity for PCP in soil solutions. Based on the results, remediation strategies using a combination of surfactants and Ni/Fe bimetallic nanoparticles for ex-situ soil remediation were proposed.

Eco‐friendly flame‐retardant based on sap from banana plant pseudostems

AbstractSociety's need for safe flame‐retardant technologies in passive fire protection is undeniable. To address this concern, this paper presents an experimental investigation of the fire‐retardant properties of slash pine wood treated with banana plant pseudostem sap, obtained from a cultivated banana plant variety widely grown in Brazil. The natural sap extract was characterized through X‐Ray Fluorescence spectrometry and Fourier Transform Infrared Spectroscopy techniques, revealing the presence of key components, including water, potassium chloride, sodium chloride, sodium silicate, calcium phosphate, sodium phosphate, lignin and tannins. The authors explored different treatment parameters, including various sap impregnation times, number of impregnations and use of natural versus various levels of concentrated sap. First, a horizontal burning test, similar test to UL 94 HB, was used to obtain an initial assessment of the suitability of sap as a flame retardant for slash pine wood. Subsequently, the Mass Loss Calorimeter equipment with thermopile attachment described in ISO 13927:2015 was used to measure various heat release rate parameters. The findings suggest that reducing the water content in sap and increasing the number of repeat treatments results in a more effective treatment for slash pine wood. More specifically, the results indicate that the most efficient treatment involves three impregnations with high‐concentration (1/10 volume reduction) sap. Future work to improve the efficacy of the concentrated sap impregnation process could explore the use of pressure treatment instead of soaking.

Unveiling the Artistry of Juan Martínez Montañés: Carving and Polychromy in the Santa Clara Church Altarpiece

Juan Martínez Montañés was one of the most important sculptors and altarpiece architects of the Spanish Golden Age. The restoration of the Santa Clara church in Seville has presented a unique opportunity to study the main altarpiece, crafted by Montañés between 1621 and 1623. He was also in charge of the polychromy and gilding, believing that delegating these procedures to others would diminish the quality of his work. This conviction led to a well-known lawsuit with the renowned contemporary Spanish painter Francisco Pacheco. Ultimately, the painter and sculptor Baltasar Quintero performed the polychromy of this altarpiece, but under the strict conditions of Montañés. Various non-invasive analytical techniques, such as CT, UVF, XRF, and digital microscopy, were employed to study wood treatment and polychromy. Additionally, three samples were prepared as cross-sections and analysed by SEM-EDX. The results revealed Montañés’ meticulous woodwork, anticipating its long-term preservation. Consistent with Montañés’ commitment to maintaining the superior quality of his work, the analysis showed an absence of a ground layer in the flesh areas, while the gilding was executed with high-quality gold. The pigment palette corresponds to the treaties and documents of his time, and the extensive areas of later retouches were accurately located. These new data provide a deeper understanding of both the technique and the high standards of one of the most important and globally recognised sculptors.