Pendant Polyethylene Oxide Research Articles

Enhanced capture of bacteria and endotoxin by antimicrobial WLBU2 peptide tethered on polyethylene oxide spacers.

Severe sepsis is a life threatening immune response that may be caused by endotoxins (lipopolysaccharides) in circulating bacterial cell wall fragments. Hemoperfusion through a sorbent column coated with the antimicrobial peptide polymyxin B (PMB) is a promising treatment for sepsis. However, PMB is cytotoxic and neurotoxic, and is a membrane disruptor that may fragment endotoxin vesicles. In addition, the blood is not protected from nonspecific interactions with the synthetic surface of the solid support. These effects may be responsible for the variety of undesirable clinical outcomes, including nonspecific adsorption of proteins, blood cell damage, platelet activation, and a lack of clear evidence of efficacy of the current hemoperfusion products. An alternative endotoxin-binding agent is WLBU2, a synthetic cationic amphiphilic peptide that exhibits better selectivity for bacterial cell membranes and reduced host cell cytotoxicity. Tethering the peptide at the periphery of a hydrophilic polyethylene oxide (PEO) brush should also mask the underlying surface, preventing cell and protein adsorption, and is expected to increase the solvent accessibility and molecular mobility of the tethered peptides. WLBU2 tethered on pendant PEO chains exhibited significantly greater capture of intact bacterial cells and endotoxin than surface-immobilized WLBU2. Tethered WLBU2 also captured amounts of endotoxin comparable to PMB. These results suggest that PEO-tethered WLBU2 coatings may be safer and more effective than the state-of-the-art PMB-based technology.

Sequential and competitive adsorption of peptides at pendant PEO layers

Earlier work provided direction for development of responsive drug delivery systems based on modulation of the structure, amphiphilicity, and surface density of bioactive peptides entrapped within pendant polyethylene oxide (PEO) brush layers. In this work, we describe the sequential and competitive adsorption behavior of such peptides at pendant PEO layers. Three cationic peptides were used for this purpose: the arginine-rich, amphiphilic peptide WLBU2, a peptide chemically identical to WLBU2 but of scrambled sequence (S-WLBU2), and the non-amphiphilic peptide poly-l-arginine (PLR). Optical waveguide lightmode spectroscopy (OWLS) was used to quantify the rate and extent of peptide adsorption and elution at surfaces coated with PEO. UV spectroscopy and time-of-flight secondary ion mass spectrometry (TOF-SIMS) were used to quantify the extent of peptide exchange during the course of sequential and competitive adsorption. Circular dichroism (CD) was used to evaluate conformational changes after adsorption of peptide mixtures at PEO-coated silica nanoparticles. Results indicated that amphiphilic peptides are able to displace adsorbed, non-amphiphilic peptides in PEO layers, while non-amphiphilic peptides were not able to displace more amphiphilic peptides. In addition, peptides of greater amphiphilicity dominated the adsorption at the PEO layer from mixtures with less amphiphilic or non-amphiphilic peptides.

Activity Retention after Nisin Entrapment in a Polyethylene Oxide Brush Layer

The cationic, amphiphilic peptide nisin is an effective inhibitor of gram-positive bacteria whose mode of action does not encourage pathogenic resistance, and its proper incorporation into food packaging could enhance food stability, safety, and quality in a number of circumstances. Sufficiently small peptides have been shown to integrate into otherwise nonfouling polyethylene oxide (PEO) brush layers in accordance with their amphiphilicity and ordered structure, including nisin, and we have recently shown that nisin entrapment within a PEO layer does not compromise the nonfouling character of that layer. In this work we test the hypothesis that surface-bound, pendant PEO chains will inhibit displacement of entrapped nisin by competing proteins and, in this way, prolong retention of nisin activity at the interface. For this purpose, the antimicrobial activity of nisinloaded, PEO-coated surfaces was evaluated against the gram-positive indicator strain, Pediococcus pentosaceous. The retained antimicrobial activity of nisin layers was evaluated on uncoated and PEO-coated surfaces after incubation in the presence of bovine serum albumin for contact periods up to 1 week. Nisin-loaded, uncoated and PEO-coated samples were withdrawn at selected times and were incubated on plates inoculated with P. pentosaceous to quantify nisin activity by determination of kill zone radii. Our results indicate that nisin activity is retained at a higher level for a longer period of time after entrapment within PEO than after direct adsorption in the absence of PEO, owing to inhibition of nisin exchange with dissolved protein afforded by the pendant PEO chains.

Concentration effects on peptide elution from pendant PEO layers

In earlier work, we have provided direction for development of responsive drug delivery systems based on modulation of structure and amphiphilicity of bioactive peptides entrapped within pendant polyethylene oxide (PEO) brush layers. Amphiphilicity promotes retention of the peptides within the hydrophobic inner region of the PEO brush layer. In this work, we describe the effects of peptide surface density on the conformational changes caused by peptide–peptide interactions, and show that this phenomenon substantially affects the rate and extent of peptide elution from PEO brush layers. Three cationic peptides were used in this study: the arginine-rich amphiphilic peptide WLBU2, the chemically identical but scrambled peptide S-WLBU2, and the non-amphiphilic homopolymer poly-l-arginine (PLR). Circular dichroism (CD) was used to evaluate surface density effects on the structure of these peptides at uncoated (hydrophobic) and PEO-coated silica nanoparticles. UV spectroscopy and a quartz crystal microbalance with dissipation monitoring (QCM-D) were used to quantify changes in the extent of peptide elution caused by those conformational changes. For amphiphilic peptides at sufficiently high surface density, peptide–peptide interactions result in conformational changes which compromise their resistance to elution. In contrast, elution of a non-amphiphilic peptide is substantially independent of its surface density, presumably due to the absence of peptide–peptide interactions. The results presented here provide a strategy to control the rate and extent of release of bioactive peptides from PEO layers, based on modulation of their amphiphilicity and surface density.

Blood protein repulsion after peptide entrapment in pendant polyethylene oxide layers

A number of sufficiently small peptides have been shown to integrate into polyethylene oxide (PEO) brush layers in accordance with their amphiphilicity and ordered structure. Those results have suggested that responsive drug delivery systems based on peptide-loaded PEO layers can be controlled by modulation of solution conditions and peptide amphiphilicity. However, the presence of entrapped peptide may compromise the protein repulsive character of the PEO layer, and in this way reduce the viability of a medical device coating based on such an approach. Nisin is a cationic, amphiphilic, and antimicrobial peptide that has been shown to integrate into PEO brush layers. In this work, the preferential location of fibrinogen at PEO-coated, nisin-loaded layers was investigated in nisin-fibrinogen sequential adsorption experiments using detection of fluorescein isothiocyanate labeled fibrinogen, detection of changes in zeta potential, and measurement of adsorption and elution kinetics by optical waveguide lightmode spectroscopy. Results from each technique indicate that the presence of entrapped nisin does not affect fibrinogen interaction with the PEO layer. In addition, entrapment of blood solutes within PEO layers contacted with 25% equine plasma in phosphate-buffered saline was reduced by the prior entrapment of nisin within the layer.

Preparation and evaluation of PEO‐coated materials for a microchannel hemodialyzer

The marked increase in surface-to-volume ratio associated with microscale devices for hemodialysis leads to problems with hemocompatibility and blood flow distribution that are more challenging to manage than those encountered at the conventional scale. In this work stable surface modifications with pendant polyethylene oxide (PEO) chains were produced on polydimethylsiloxane (PDMS), polycarbonate microchannel, and polyacrylonitrile membrane materials used in construction of microchannel hemodialyzer test articles. PEO layers were prepared by radiolytic grafting of PEO-polybutadiene-PEO (PEO-PB-PEO) triblock polymers to the material surfaces. Protein repulsion was evaluated by measurement of surface-bound enzyme activity following contact of uncoated and PEO-coated surfaces with β-galactosidase. Protein adsorption was decreased on PEO-coated polycarbonate and PDMS materials to about 20% of the level recorded on the uncoated materials. Neither the triblocks nor the irradiation process was observed to have any effect on protein interaction with the polyacrylonitrile membrane, or its permeability to urea. This approach holds promise as a means for in situ application of safe, efficacious coatings to microfluidic devices for blood processing that will ensure good hemocompatibility and blood flow distribution, with no adverse effects on mass transfer.

Quantifying nisin adsorption behavior at pendant PEO layers

The antimicrobial peptide nisin shows potent activity against Gram-positive bacteria including the most prevalent implant-associated pathogens. Its mechanism of action minimizes the opportunity for the rise of resistant bacteria and it does not appear to be toxic to humans, suggesting good potential for its use in antibacterial coatings for selected medical devices. A more quantitative understanding of nisin loading and release from polyethylene oxide (PEO) brush layers will inform new strategies for drug storage and delivery, and in this work optical waveguide lightmode spectroscopy was used to record changes in adsorbed mass during cyclic adsorption-elution experiments with nisin, at uncoated and PEO-coated surfaces. PEO layers were prepared by radiolytic grafting of Pluronic® surfactant F108 or F68 to silanized silica surfaces, producing long- or short-chain PEO layers, respectively. Kinetic patterns were interpreted with reference to a model accounting for history-dependent adsorption, in order to evaluate rate constants for nisin adsorption and desorption, as well as the effect of pendant PEO on the lateral clustering behavior of nisin. Nisin adsorption was observed at the uncoated and F108-coated surfaces, but not at the F68-coated surfaces. Nisin showed greater resistance to elution by peptide-free buffer at the uncoated surface, and lateral rearrangement and clustering of adsorbed nisin was apparent only at the uncoated surface. We conclude peptide entrapment at the F108-coated surface is governed by a hydrophobic inner region of the PEO brush layer that is not sufficient for nisin entrapment in the case of the shorter PEO chains of the F68-coated surface.

Detection of nisin and fibrinogen adsorption on poly(ethylene oxide) coated polyurethane surfaces by time-of-flight secondary ion mass spectrometry (TOF-SIMS)

Stable, pendant polyethylene oxide (PEO) layers were formed on medical-grade Pellethane® and Tygon® polyurethane surfaces, by adsorption and gamma-irradiation of PEO–polybutadiene–PEO triblock surfactants. Coated and uncoated polyurethanes were challenged individually or sequentially with nisin (a small polypeptide with antimicrobial activity) and/or fibrinogen, and then analyzed with time-of-flight secondary ion mass spectrometry (TOF-SIMS). Data reduction by robust principal components analysis (PCA) allowed detection of outliers, and distinguished adsorbed nisin and fibrinogen. Fibrinogen-contacted surfaces, with or without nisin, were very similar on uncoated polymer surfaces, consistent with nearly complete displacement or coverage of previously-adsorbed nisin by fibrinogen. In contrast, nisin-loaded PEO layers remained essentially unchanged upon challenge with fibrinogen, suggesting that the adsorbed nisin is stabilized within the pendant PEO layer, while the peptide-loaded PEO layer retains its ability to repel large proteins. Coatings of PEO loaded with therapeutic polypeptides on medical polymers have the potential to be used to produce anti-fouling and biofunctional surfaces for implantable or blood-contacting devices.

Nisin adsorption to polyethylene oxide layers and its resistance to elution in the presence of fibrinogen

The adsorption and elution of the antimicrobial peptide nisin at silanized silica surfaces coated to present pendant polyethylene oxide chains was detected in situ by zeta potential measurements. Silica microspheres were treated with trichlorovinylsilane to introduce hydrophobic vinyl groups, followed by self assembly of the polyethylene oxide–polypropylene oxide–polyethylene oxide (PEO–PPO–PEO) triblock surfactant Pluronic® F108, or an F108 derivative with nitrilotriacetic acid end groups. Triblock-coated microspheres were γ-irradiated to covalently stabilize the PPO-surface association. PEO layer stability was evaluated by triblock resistance to elution by SDS, and layer uniformity was evaluated by fibrinogen repulsion. Introduction of nisin to uncoated or triblock-coated microspheres produced a significant positive change in surface charge (zeta potential) as a result of adsorption of the cationic peptide. In sequential adsorption experiments, the introduction of fibrinogen to nisin-loaded triblock layers caused a decrease in zeta potential that was consistent with partial elution of nisin and/or preferential location of fibrinogen at the interface. This change was substantially more pronounced for uncoated than triblock-coated silica, indicating that the PEO layer offers enhanced resistance to nisin elution.

MMA/MPEOMA/VSA copolymer as a novel blood-compatible material: ex vivo platelet adhesion study.

MMA/MPEOMA/VSA copolymers with both pendant polyethylene oxide (PEO) side chains and negatively chargeable side groups were synthesized by random copolymerization of methyl methacrylate (MMA), methoxy PEO monomethacrylate (MPEOMA; PEO mol. wt, 1000), and vinyl sulfonic acid sodium salt (VSA) monomers with different monomer composition to evaluate their blood compatibility. MMA/MPEOMA copolymer (with PEO side chains) and MMA/VSA copolymer (with negatively chargeable side groups) were also synthesized for the comparison purpose. The synthesized copolymers were coated onto polyurethane (PU) tubes (inner diameter, 4.6 mm) by a spin coating. The platelet adhesion of the MMA/MPEOMA/VSA copolymer-coated tube surfaces was compared with that of tube surface coated with MMA/MPEOMA or MMA/VSA copolymer with similar MPEOMA or VSA composition, using an ex vivo canine arterio-artery shunt method. The platelet adhesion was evaluated by radioactivity counting of technetium (99mTc)-labeled platelets adhered on the surfaces after 30 and 120 min of blood circulation. The MMA/MPEOMA/VSA copolymer (monomer molar ratio 9/0.5/0.5 or 8/1/1) was better in preventing platelet adhesion on the surface than the MMA/MPEOMA or MMA/VSA copolymer with similar MPEOMA or VSA composition, probably owing to the combined effects of highly mobile, hydrophilic PEO side chains and negatively charged VSA side groups.

Single‐ion and salt conductor polymer electrolytes based on poly(4‐vinylpyridine) quaternized with poly(ethylene oxide) side chains

A new type of single-ion conductor with fixed cation was synthesized by spontaneous anionic polymerization of 4-vinylpyridine in the presence of short polyethylene oxide (PEO) chains as alkylating agents. These comblike polymers have low Tgs and are amorphous with the shorter PEOs. Their conductivities are unaffected by the nature of the anion (Br−, ClO4−, and tosylate) and are controlled by the free volume and the mobility of the pendant cation. By comparison of the results at constant free volume, it is shown that the charge density decreases with the increasing length of pendant PEO demonstrating that PEO acts only as a plasticizing agent. Best conductivity results (σ = 10−5 S cm−1 at 60°C) are obtained with PEO side chains of molecular weight 350. With this sample, the conductivity in the presence of various amounts of added salt (LiTFSI) was studied. A best value of 10−4 S cm−1 at 60°C is obtained with a molar ratio EO/Li of 10. It is shown that, over the range of examined concentrations (0.2–1.3 mol Li kg−1), the reduced conductivity σr/c increases linearly with increasing salt concentration showing that the ion mobility increases continuously. Such behavior is quite unusual since in this concentration range a maximum is generally observed with PEO systems. To interpret this result and by analogy with the behavior of this type of polymer in solution, it is proposed that the conformation of these polymers in the solid state is segregated with the P4VP skeleton more or less confined inside the dense coils surrounded by the PEO side chains. Under the influence of the increasing salt concentration, this microphase separation vanishes progressively: The LiTFSI salt exchanges with the tosylate anions and acts as a miscibility improver agent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2719–2728, 1997

Single-ion and salt conductor polymer electrolytes based on poly(4-vinylpyridine) quaternized with poly(ethylene oxide) side chains

A new type of single-ion conductor with fixed cation was synthesized by spontaneous anionic polymerization of 4-vinylpyridine in the presence of short polyethylene oxide (PEO) chains as alkylating agents. These comblike polymers have low Tgs and are amorphous with the shorter PEOs. Their conductivities are unaffected by the nature of the anion (Br−, ClO4−, and tosylate) and are controlled by the free volume and the mobility of the pendant cation. By comparison of the results at constant free volume, it is shown that the charge density decreases with the increasing length of pendant PEO demonstrating that PEO acts only as a plasticizing agent. Best conductivity results (σ = 10−5 S cm−1 at 60°C) are obtained with PEO side chains of molecular weight 350. With this sample, the conductivity in the presence of various amounts of added salt (LiTFSI) was studied. A best value of 10−4 S cm−1 at 60°C is obtained with a molar ratio EO/Li of 10. It is shown that, over the range of examined concentrations (0.2–1.3 mol Li kg−1), the reduced conductivity σr/c increases linearly with increasing salt concentration showing that the ion mobility increases continuously. Such behavior is quite unusual since in this concentration range a maximum is generally observed with PEO systems. To interpret this result and by analogy with the behavior of this type of polymer in solution, it is proposed that the conformation of these polymers in the solid state is segregated with the P4VP skeleton more or less confined inside the dense coils surrounded by the PEO side chains. Under the influence of the increasing salt concentration, this microphase separation vanishes progressively: The LiTFSI salt exchanges with the tosylate anions and acts as a miscibility improver agent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2719–2728, 1997