Concentration Of PEG-lipid Research Articles

Quantitative Visualization of Lipid Nanoparticle Fusion as a Function of Formulation and Process Parameters.

Lipid nanoparticles (LNPs) have proven to be promising delivery vehicles for RNA-based vaccines and therapeutics, particularly in LNP formulations containing ionizable cationic lipids that undergo protonation/deprotonation in response to buffer pH changes. These nanoparticles are typically formulated using a rapid mixing technique at low pH, followed by a return to physiological pH that triggers LNP-LNP fusion. A detailed understanding of these dynamic processes is crucial to optimize the overall performance and efficiency of LNPs. However, knowledge gaps persist regarding how particle formation mechanisms impact drug loading and delivery functions. In this work, we employ single-molecule Convex Lens-induced Confinement (CLiC) microscopy in combination with Förster resonance energy transfer (FRET) measurements to study LNP fusion dynamics in relation to various formulation parameters, including lipid concentration, buffer conditions, drug loading ratio, PEG-lipid concentrations, and ionizable lipid selection. Our results reveal a strong correlation between the measured fusion dynamics and the formulation parameters used; these findings are consistent with DLS and Cryo-TEM-based assays. These measurements offer a cost-effective method for characterizing and screening potential drug candidates and can provide additional insights into their design, with opportunities for optimization.

Poly(ethylene glycol) lipid-shelled microbubbles: abundance, stability, and mechanical properties.

Poly(ethylene glycol) (PEG) is widely used on the outside of biomedical delivery vehicles to impart stealth properties. Encapsulated gas microbubbles (MBs) are being increasingly considered as effective carriers for therapeutic intervention to deliver drug payloads or genetic vectors. MBs have the advantage that they can be imaged and manipulated by ultrasound fields with great potential for targeted therapy and diagnostic purposes. Lipid-shelled MBs are biocompatible and can be functionalized on the outer surface for tissue targeting and new therapeutic methods. As MBs become a key route for drug delivery, exploring the effect of PEG-ylation on the MB properties is important. Here, we systematically investigate the effect of PEG-lipid solution concentration ranging between 0 and 35 mol % on the formation of MBs in a microfluidic flow-focusing device. The abundance of the MBs is correlated with the MB lifetime and the whole MB mechanical response, as measured by AFM compression using a tipless cantilever. The maximal MB concentration and stability (lifetime) occurs at a low concentration of PEG-lipid (∼5 mol %). For higher PEG-lipid concentrations, the lifetime and MB concentration decrease, and are accompanied by a correlation between the predicted surface PEG configuration and the whole MB stiffness, as measured at higher compression loads. These results inform the rationale design and fabrication of lipid-based MBs for therapeutic applications and suggest that only relatively small amounts of PEG incorporation are required for optimizing MB abundance and stability while retaining similar mechanical response at low loads.

Mechanical properties of mushroom and brush poly(ethylene glycol)-phospholipid membranes

Supported poly(ethylene glycol)-lipid bilayers (PEG-SLBs) are of interest as scaffolds in future generations of transmembrane protein sensor platforms and in their own right as model systems to investigate the behavior of glycosylated biological membranes. We investigate the effect of PEG-lipid concentration from the PEG dilute mushroom to brush regime in PEG-SLBs on lipid mobility and membrane behavior under locally applied compression force. Fluorescence recovery after photobleaching (FRAP) measurements demonstrated a gradual transition of the POPC lipid bilayer from liquid crystalline to gel phase for a PEG-lipid concentration below 10 mol% and PEG molecular weight of 2000 Da. The observed control of lipid phase behavior already at low interacting polymer lipid concentrations could have wider implications for the understanding of biological membrane systems. Further mechanical properties of the PEG-SLBs were probed by force–distance measurements with an atomic force microscope (AFM). Significant differences in the compression of mobile and immobile tethered polymer chains were observed. The results were interpreted through a model describing compression force profiles for polymers attached to mobile tethers, which reproduces a unique transition observed as mobile polymer tethers are locally depleted under compression.

Surface-Supported Bilayers with Transmembrane Proteins: Role of the Polymer Cushion Revisited

Protein lateral mobility in surface-supported bilayers is often much lower than the mobility of the lipids. In the present study we explore whether the incorporation of a PEG cushion between the bilayer and the substrate increases the lateral mobility of transmembrane proteins in bilayers produced via directed assembly, a method based on Langmuir-Blodgett deposition techniques. In our experiments, the PEG cushions were incorporated by adding PEG lipids to the protein/lipid monolayer at the air/water interface, at the first step of bilayer assembly. The protein and lipid mobilities in 160 different bilayers, with various PEG molecular weights and PEG lipid concentrations, were measured and compared. We found that the measured diffusion coefficients do not depend on the PEG molecular weight or the PEG lipid concentration and are very similar to the values measured in the absence of PEG. Therefore, contrary to our expectations, we found that a PEG cushion does not necessarily increase protein mobility, suggesting that the low protein mobility is not a consequence of protein-substrate interactions. Furthermore, we showed that the low protein mobility is not due to protein aggregation. The major determinant of protein mobility in surface-supported bilayer systems appears to be the method of bilayer assembly. While proteins were always mobile if the bilayers were prepared using the directed assembly method, in the presence and absence of a PEG cushion, other bilayer assembly protocols resulted in complete lack of protein mobility.

Effect of a PEG lipid (DSPE-PEG2000) and freeze-thawing process on phospholipid vesicle size and lamellarity

Liposomes containing distearoylphosphatidylethanolamine with covalently linked polyethylene glycol of molecular weight 2,000 (DSPE-PEG2000) covering a range of 0–30 mol% were prepared by a mechanical dispersion or detergent-removal method. The effects of DSPE-PEG2000 on particle sizes and lamellarity of liposomes were investigated. The average diameters of vesicles prepared from both methods decreased when the concentration of DSPE-PEG2000 was increased. The decrease in vesicle size with increase in DSPE-PEG2000 was ascribed to the steric hindrance of strongly hydrated PEG. The significant decrease in the sizes of DSPE-PEG2000-containing EggPC vesicles prepared by the detergent-removal method could be explained by the postvesiculation size growth in the process of micelle–vesicle transition. For DMPC vesicles prepared by the detergent-removal method, electron micrographs showed that inclusion of DSPE-PEG2000 promoted vesicle formation. Based on the results of investigation of calcein entrapment efficiency, we concluded that the lamellarity of liposomes is reduced as PEG lipid concentration is increased. Fragmentation of multilamellar vesicles into smaller unilamellar vesicles occurred more readily when the liposome suspension was subjected to repetitive freeze-thawing. After five cycles of freezing and thawing, vesicles containing more than 0.5 mol% DSPE-PEG2000 were fragmented into unilamellar vesicles with diameters smaller than 300 nm.

Liposomes, Disks, and Spherical Micelles: Aggregate Structure in Mixtures of Gel Phase Phosphatidylcholines and Poly(Ethylene Glycol)-Phospholipids

Poly(ethylene glycol) (PEG) decorated lipid bilayers are widely used in biomembrane and pharmaceutical research. The success of PEG-lipid stabilized liposomes in drug delivery is one of the key factors for the interest in these polymer/lipid systems. From a more fundamental point of view, it is essential to understand the effect of the surface grafted polymers on the physical-chemical properties of the lipid bilayer. Herein we have used cryo-transmission electron microscopy and dynamic light scattering to characterize the aggregate structure and phase behavior of mixtures of PEG-lipids and distearoylphosphatidylcholine or dipalmitoylphosphatidylcholine. The PEG-lipids contain PEG of molecular weight 2000 or 5000. We show that the transition from a dispersed lamellar phase (liposomes) to a micellar phase consisting of small spherical micelles occurs via the formation of small discoidal micelles. The onset of disk formation already takes place at low PEG-lipid concentrations (<5 mol %) and the size of the disks decreases as more PEG-lipid is added to the lipid mixture. We show that the results from cryo-transmission electron microscopy correlate well with those obtained from dynamic light scattering and that the disks are well described by an ideal disk model. Increasing the temperature, from 25°C to above the gel-to-liquid crystalline phase transition temperature for the respective lipid mixtures, has a relatively small effect on the aggregate structure.

Physicochemical Properties of PEG-Grafted Liposomes.

Egg phosphatidylcholine (EggPC) or dimyristoylphosphatidylcholine (DMPC) liposomes containing polyethylene glycol (PEG)-lipids covering a range of 0-30 mol% have been prepared by Extrusion method. The physicochemical properties including size evolution and calcein permeation were evaluated to investigate the effect of PEG-lipids on bilayer structure. The results from quasielasetic light scattering (QELS), freeze-fracture microscopy, and gel exclusion chromatography revealed that presence of low concentration of PEG-lipid results in decreasing of vesicle size and further increase in the PEG-lipid concentrations lead to a transition from the lamellar membranes to micelles. The permeability for calcein increased with increase in concentration of distearoylphosphatidylethanolamine (DSPE)-PEG. On the other hand, the permeability decreased with low amount of cholesterol-PEG (blow 20% cholesterol-PEG) and increased with high amount of it. The maximum concentration of PEG-lipid that may be incorporated without alteration of the liposome structure depends on the composition of the bilayer. The concentration of DSPE-PEG2000 incorporated into vesicles without damaging vesicle structures were <20 mol% for EggPC and <10% for DMPC.

Phase Behavior and Aggregate Structure in Mixtures of Dioleoylphosphatidylethanolamine and Poly(Ethylene Glycol)-Lipids

Cryo-transmission electron microscopy has been used to investigate the phase behavior and aggregate structure in dilute aqueous mixtures of dioleoylphosphatidylethanolamine (DOPE) and poly(ethylene glycol)-phospholipids (PEG-lipids). It is shown that PEG-lipids (micelle-forming lipids) induce a lamellar phase in mixtures with DOPE (inverted hexagonal forming lipid). The amount of PEG-lipid that is needed to induce a pure dispersed lamellar phase, at physiological conditions, depends on the size of the PEG headgroup. In the transition region between the inverted hexagonal phase and the lamellar phase, particles with dense inner textures are formed. It is proposed that these aggregates constitute dispersed cubic phase particles. Above bilayer saturating concentration of PEG-lipid, small disks and spherical micelles are formed. The stability of DOPE/PEG-lipid liposomes, prepared at high pH, against a rapid drop of the pH was also investigated. It is shown that the density of PEG-lipid in the membrane, sufficient to prevent liposome aggregation and subsequent phase transition, depends on the size of the PEG headgroup. Below a certain density of PEG-lipid, aggregation and phase transition occurs, but the processes involved proceed relatively slow, over the time scale of weeks. This allows detailed studies of the aggregate structure during membrane fusion.

Hydration of Polyethylene Glycol-Grafted Liposomes

This study aimed to characterize the effect of polyethylene glycol of 2000 molecular weight (PEG 2000) attached to a dialkylphosphatidic acid (dihexadecylphosphatidyl (DHP)-PEG 2000) on the hydration and thermodynamic stability of lipid assemblies. Differential scanning calorimetry, densitometry, and ultrasound velocity and absorption measurements were used for thermodynamic and hydrational characterization. Using a differential scanning calorimetry technique we showed that each molecule of PEG 2000 binds 136 ± 4 molecules of water. For PEG 2000 covalently attached to the lipid molecules organized in micelles, the water binding increases to 210 ± 6 water molecules. This demonstrates that the two different structural configurations of the PEG 2000, a random coil in the case of the free PEG and a brush in the case of DHP-PEG 2000 micelles, differ in their hydration level. Ultrasound absorption changes in liposomes reflect mainly the heterophase fluctuations and packing defects in the lipid bilayer. The PEG-induced excess ultrasound absorption of the lipid bilayer at 7.7 MHz for PEG-lipid concentrations over 5 mol % indicates the increase in the relaxation time of the headgroup rotation due to PEG-PEG interactions. The adiabatic compressibility (calculated from ultrasound velocity and density) of the lipid bilayer of the liposome increases monotonically with PEG-lipid concentration up to ∼7 mol %, reflecting release of water from the lipid headgroup region. Elimination of this water, induced by grafted PEG, leads to a decrease in bilayer defects and enhanced lateral packing of the phospholipid acyl chains. We assume that the dehydration of the lipid headgroup region in conjunction with the increase of the hydration of the outer layer by grafting PEG in brush configuration are responsible for increasing thermodynamic stability of the liposomes at 5–7 mol % of PEG-lipid. At higher PEG-lipid concentrations, compressibility and partial volume of the lipid phase of the samples decrease. This reflects the increase in hydration of the lipid headgroup region (up to five additional water molecules per lipid molecule for 12 mol % PEG-lipid) and the weakening of the bilayer packing due to the lateral repulsion of PEG chains.

Effect of polyethyleneglycol-phospholipids on aggregate structure in preparations of small unilamellar liposomes

Phospholipids with covalently attached poly(ethylene glycol) (PEG lipids) are commonly used for the preparation of long circulating liposomes. Although it is well known that lipid/PEG-lipid mixed micelles may form above a certain critical concentration of PEG-lipid, little is known about the effects of PEG-lipids on liposome structure and leakage at submicellar concentrations. In this study we have used cryogenic transmission electron microscopy to investigate the effect of PEG(2000)-PE on aggregate structure in preparations of liposomes with different membrane compositions. The results reveal a number of important aggregate structures not documented before. The micrographs show that enclosure of PEG-PE induces the formation of open bilayer discs at concentrations well below those where mixed micelles begin to form. The maximum concentration of PEG-lipid that may be incorporated without alteration of the liposome structure depends on the phospholipid chain length, whereas phospholipid saturation or the presence of cholesterol has little or no effect. The presence of cholesterol does, however, affect the shape of the mixed micelles formed at high concentrations of PEG-lipid. Threadlike micelles form in the absence of cholesterol but adapt a globular shape when cholesterol is present.

Effect of Bilayer Composition on the Phase Behavior of Liposomal Suspensions Containing Poly(ethylene glycol)-Lipids

Liposomes containing phospholipids with covalently attached poly(ethylene glycol) (PEG-lipids) are being developed for use as carriers in in vivo drug delivery. A critical design parameter for these liposomes is the maximum amount of PEG-lipids that can be incorporated into the phospholipid bilayer before it is converted into a micelle. In this paper, X-ray diffraction is used to determine this saturation limit of PEG-lipids for a variety of phospholipid bilayers with different tensile strengths and polymorphic properties. It is found that 15-20 mol % PEG-lipid can be incorporated into gel phase bilayers, liquid-crystalline bilayers, and bilayers containing equimolar cholesterol. However, the saturation limit of PEG-lipid in the bilayer is decreased to about 8 mol % when lysolipids are added to liquid-crystalline phase bilayers or when the gel phase bilayers are made with shorter hydrocarbon chains. These data indicate that the phase transition from lamellar to micellar phase for lipid suspensions containing PEG-lipids does not depend strongly on the tensile strength of the bilayer, but rather is determined primarily by the polymorphic properties of the lipid molecules. This study also measures the range and magnitude of the steric barrier provided by the incorporation of PEG-lipid into bilayers of different compositions. The steric barrier depends on the concentration of PEG-lipid in the bilayer, with the incorporation of 10 mol % PEG-2000 into gel, liquid-crystalline, and cholesterol-containing bilayers providing a barrier that extends about 65 A from each bilayer surface.

Structure and phase behavior of lipid suspensions containing phospholipids with covalently attached poly(ethylene glycol)

Liposomes containing phospholipids with covalently attached poly(ethylene glycol) (PEG-lipids) are being developed for in vivo drug delivery. In this paper we determine the structure and phase behavior of fully hydrated distearoylphosphatidylcholine (DSPC) suspensions containing PEG-lipids composed of distearoylphosphatidylethanolamine with attached PEGs of molecular weights ranging from 350 to 5000. For DSPC:PEG-lipid suspensions containing 0-60 mol % PEG-lipid, differential scanning calorimetry shows main endothermic transitions ranging from 55 to 64 degrees C, depending on the size of the PEG and concentration of PEG-lipid. The enthalpy of this main transition remains constant for all PEG-350 concentrations but decreases with increasing amounts of PEG-750, PEG-2000, or PEG-5000, ultimately disappearing at PEG-lipid concentrations greater than about 60 mol %. Low-angle and wide-angle x-ray diffraction show that tilted gel (L beta') phase bilayers are formed for all PEG-lipid molecular weights at concentrations of about 10 mol % or less, with the distance between bilayers depending on PEG molecular weight and PEG-lipid concentration. At PEG-lipid concentrations greater than 10 mol %, the lipid structure depends on the size of the PEG moiety. X-ray diffraction analysis shows that untilted interdigitated (L beta I) gel phase bilayers form with the incorporation of 40-100 mol % PEG-350 or 20-70 mol % PEG-750, and untilted gel (L beta) phase bilayers are formed in the presence of about 20-60 mol % PEG-2000 and PEG-5000. Light microscopy, turbidity measurements, x-ray diffraction, and 1H-NMR indicate that a pure micellar phase forms in the presence of greater than about 60% PEG-750, PEG-2000, or PEG-5000.

Range and magnitude of the steric pressure between bilayers containing phospholipids with covalently attached poly(ethylene glycol)

The interactive properties of liposomes containing phospholipids with covalently attached poly(ethylene glycol) (PEG-lipids) are of interest because such liposomes are being developed as drug delivery vehicles and also are ideal model systems for measuring the properties of surface-grafted polymers. For bilayers containing PEG-lipids with PEG molecular weights of 350, 750, 2000, and 5000, pressure-distance relations have been measured by X-ray diffraction analysis of liposomes subjected to known applied osmotic pressures. The distance between apposing bilayers decreased monotonically with increasing applied pressure for each concentration of a given PEG-lipid. Although for bilayers containing PEG-350 and PEG-750 the contribution of electrostatic repulsion to interbilayer interactions was significant, for bilayers containing PEG-2000 and PEG-5000 the major repulsive pressure between bilayers was a steric pressure due to the attached PEG. The range and magnitude of this steric pressure increased both with increasing PEG-lipid concentration and PEG size, and the extension length of the PEG from the bilayer surface at maximum PEG-lipid concentration depended strongly on the size of the PEG, being less than 35 A for PEG-750, and about 65 A for PEG-2000 and 115 A for PEG-5000. The measured pressure-distance relations have been modeled in terms of current theories (deGennes, 1987; Milner et al., 1988b) for the steric pressure produced by surface-grafted polymers, as modified by us to take into account the effects of polymer polydispersity and the possibility that, at low grafting densities, polymers from apposing bilayers surfaces can interpenetrate or interdigitate. No one theoretical scheme is sufficient to account for all the experimental results. However, for a given pressure regime, PEG-lipid size, and PEG-lipid surface density, the appropriately modified theoretical treatment gives a reasonable fit to the pressure-distance data.