Pd Precursor Research Articles

Freestanding Penta-Twinned Pd-Ag Nanosheets.

2D metal nanosheets have attracted significant attention as efficient catalysts for various important chemical reactions. However, the development of metal nanosheets with controlled compositions and morphologies has been slow due to the challenges associated with synthesizing thermodynamically unfavorable 2D structures. Herein, we report a synthesis route of freestanding Pd-Ag penta-twinned nanosheets (Pd-Ag ptNSs) with distinct 5-fold twin boundaries. Through the coreduction of Ag and Pd precursors on presynthesized Pd ptNSs, Ag could be homogeneously alloyed with Pd, leading to the formation of well-defined Pd-Ag ptNSs. The promotional effects of the bimetallic composition, 2D structure, and twin boundaries on catalysis were studied by using Pd-Ag ptNS-catalyzed H2 production from formic acid decomposition as a model reaction. Notably, the catalytic activity of the Pd-Ag ptNSs drastically outperformed those of monometallic, bimetallic, and 3D counterparts, such as Pd ptNSs, Pd-Ag nanosheets without a TB, and Pd-Ag octahedral nanocrystals, demonstrating the promising potential of the integration of twin boundaries and multiple compositions in the development of high-performance 2D nanocatalysts.

Improving Catalytic Performance via the Synergy of Tensile Lattice Strain and Plasmonic Enhancement in Defective AuPd@Pd Short Nanowires.

The synthesis of bimetallic nanocatalysts with strained crystal lattices has attracted considerable interest. This is because, beyond the electronic structure modifications realized through elemental doping, the strain effect offers an extra mechanism to fine-tune the electronic structures, thereby possibly improving the catalytic performances. We present a method for constructing defective AuPd@Pd short nanowires, achieved through a controlled galvanic replacement reaction between short AuCu nanowires and Pd precursors. Advanced structural analyses using spherical aberration-corrected transmission electron microscopy (AC-TEM) validated the expanded crystal lattice on the nanowire surface and also demonstrated pronounced plasmonic absorption in the UV-vis region. Leveraging both plasmonic absorption and strain effects, the AuPd@Pd short nanowires displayed a higher apparent rate constant compared to Pd nanoparticles. Integrating molecular dynamic simulations with density functional theory calculations revealed that the tensile strain on AuPd@Pd short nanowires benefited the catalytic activity by elevating the d-band center, thereby intensifying the adsorption of p-nitrophenol. The current research introduces a unique method for synthesizing noble metal nanocrystals with specific dimensions and elucidates the rational development of high-performance plasmonic nanocatalysts through synergistic exploitation of the beneficial strain effect.

In situ synthesis and deposition of palladium nanoparticles on gas diffusion layers via gamma radiolysis for cathode electrodes in proton exchange membrane fuel cells

This study investigates gamma radiolysis technique for synthesising and depositing palladium (Pd) nanoparticles on gas diffusion layers (GDLs). The Pd-coated GDLs were then used to fabricate MEAs, which were evaluated for their single-cell performance. The fabricated PEMFCs with Pd-loaded GDLs successfully generated potential and produced electricity, with the PEMFC with a Pd-loaded GDL prepared using a 0.05 M Pd precursor solution and 50 KGy dose achieved performances comparable to the PEMFC with commercial gas diffusion electrodes (GDEs). This study represents the first demonstration of a functional PEMFC using a novel gamma radiolysis-synthesised Pd catalyst GDL as the cathode electrode.

Stable and Versatile Pd Precursors for the Preparation of Robust Pd Catalysts Under Continuous-Flow.

To achieve global sustainability, the chemical and engineering communities require the development of versatile precursors that can be used to synthesize robust catalysts. To meet this demand, we developed a new Pd precursor for highly efficiently incorporating fine Pd-metal into supports. An atmospherically stable Pd precursor (Pd-80) was prepared by thermally promoting the aerobic oxidation of tetrakis(triphenylphosphine)palladium. The physical properties of Pd-80 were investigated by NMR spectroscopy, SEM, XPS, solvent-relaxation NMR spectroscopy, and dynamic light scattering (DLS) experiments. We also prepared a cordierite-supported Pd catalyst (Pd/cordierite) by stirring Pd-80 and cordierite powder in chloroform at room temperature. Pd/cordierite selectively catalyzed the hydrogenation of various reducible functional groups, including alkynes, azides, nitro groups, olefins, CO2Bn, N-Cbz, O-Bn, aromatic ketones, and styrene oxide, in continuous-flow hydrogenation reactions. The Pd/cordierite-catalyzed continuous-flow hydrogenation of nitrobenzene derivatives afforded the corresponding anilines, with catalytic activities maintained for over 250 h of continuous operation with a turnover number (TON) of 61,090.

Elucidating refractive index sensitivity on subradiant, superradiant, and fano resonance modes in single palladium-coated gold nanorods

Herein, we investigated the distinctive scattering properties exhibited by single gold nanorods coated with palladium (AuNRs@Pd), with variations in the Pd shell thicknesses and morphologies. AuNRs@Pd were synthesized through bottom-up epitaxial Pd growth using two different concentrations of Pd precursor. These single AuNRs@Pd displayed the characteristic of subradiant and superradiant localized surface plasmon resonance peaks, characterized by a noticeable gap marked by a Fano dip. We revealed the effect of local refractive index (RI) on the subradiant and superradiant peak energies, as well as the Fano dip in the scattering spectra of AuNRs@Pd with different Pd shell thicknesses. We demonstrated the applicability of the inflection points (IFs) method on detecting peaks and dip changes across different RIs. Thin AuNRs@Pd1mM displayed more pronounced sensitivity to peak shifts in response to variations in local RIs compared to thick AuNRs@Pd2mM. In contrast, thick AuNRs@Pd2mM exhibited greater sensitivity to changes in curvature near the subradiant and superradiant peak energies rather than peak shift sensitivity across different local RIs. Moreover, the Fano dip shift was more noticeable in thick AuNRs@Pd2mM compared to thin AuNRs@Pd1mM across different local RIs. Therefore, we provided new insight into the RI sensitivity on subradiant, superradiant, and Fano resonance modes in single AuNRs@Pd.

Nest-shaped hollow-encapsulated Pd catalyst enhances the catalytic performance of hydrogen peroxide directly synthesizing from hydrogen and oxygen

A well-defined structural morphology can significantly construct a special catalytic micro-reaction environment to enhance the catalytic performance of Pd catalyst in the direct synthesis of hydrogen peroxide from hydrogen and oxygen (DSHP). In this study, SiO2 was used as a rigid template, PdCl2 as the Pd precursor, and dopamine hydrochloride (DA) as the carbon and nitrogen source to synthesize a nest-shaped hollow-encapsulated Pd catalyst named PdMulti@ONHCS. This catalyst was successfully constructed via high-temperature pyrolysis of poly dimethyl diallyl ammonium chloride (PDDA), which generated a blasting effect crucial for this formation. Characterization analysis, catalytic performance evaluation experiment, and molecular dynamics simulation were conducted to explore the structure-performance relationship of PdMulti@ONHCS catalyst in DSHP. Both experimental and simulation results consistently showed that the nest-shaped hollow structure of PdMulti@ONHCS catalyst created a distinctive catalytic microreactor environment with a spatial mass transfer constraint, which was not only conducive to adsorption and enrichment of H2 and O2 at Pd active sites to produce H2O2. In addition, the generated H2O2 can be desorbed from Pd active sites in time and rapidly diffused into the reaction solution, effectively inhibiting the dissociation of species containing OO bonds on the Pd surface, resulting in severe hydrogenation and decomposition side reactions, and improving H2O2 productivity and selectivity.

Pd-Catalyzed Borylation in Water and Its Application to the Synthesis of Active Pharmaceutical Ingredient (API) Intermediates.

An efficient catalytic borylation reaction of aryl bromides in water based on Pd catalysis under micellar conditions is presented. The peculiar combination of the proper Pd precursor with a Sphos ligand and a hindered lipophilic base ensures good yields in the synthesis of a wide range of boronic esters, even for heteroaryl derivatives with a good purity profile. The method is specifically developed for the in situ preparation of boronic esters that are directly converted into examples of relevant active pharmaceutical ingredient intermediates through cross-coupling reactions or via oxidation to phenols.

Electroless Deposition of Noble Metals on Rod-Shape Plant Viruses in Various Aqueous Metal Precursor Solutions.

The challenge of synthesizing noble metal nanostructures sustainably has encouraged researchers to explore biological routes for nanostructure production, such as biotemplating. Plant viruses with rod-shape morphology, such as tobacco mosaic virus (TMV) and barley stripe mosaic virus (BSMV), offer promising biotemplates to produce metal nanorods. TMV and BSMV can be incubated in aqueous metal precursor solutions to mineralize metals on the coat proteins (CPs) of the viruses. Previous studies have primarily examined palladium (Pd) mineralization on TMV and BSMV using Na2PdCl4 as the Pd precursor. There is limited scientific literature on the effect of using alternative Pd precursor solutions besides Na2PdCl4 such as K2PdCl4 and PdCl2 to mineralize Pd on TMV and BSMV. Past attempts at mineralizing other noble metals such as platinum (Pt) and gold (Au) required an initial layer of Pd to be deposited on the TMV and BSMV biotemplates. In this study, we aimed to expand the understanding of using alternative Pd precursor solutions to mineralize Pd on TMV and BSMV. Additionally, the deposition of Pt and Au onto TMV and BSMV without the need for an initial Pd mineralization layer was achieved using alternative Pt and Au precursors, including K2PtCl4 and AuCl3, respectively. Pd, Pt, and Au were successfully deposited on TMV and BSMV by incubation in aqueous solutions of Na2PdCl4, K2PdCl4, PdCl2, K2PtCl4, and AuCl3. Kinetic studies were also conducted using ultraviolet-visible (UV-vis) spectroscopy to examine the rates at which Pd, Pt, and Au precursor ions were reduced during the mineralization process, mimicking their adsorption onto TMV and BSMV CPs. BSMV adsorbed noble metal precursor ions faster than TMV as determined by UV-vis spectroscopy. While palladium nanorods (PdNRs) offer high electrical conductivity desirable for electronic applications, Pd-coated TMV and BSMV may face limitations due to their organic cores, potentially compromising conductivity. To address this, one approach is to convert the organic core into conductive amorphous carbon through thermal annealing. In this study, in situ transmission electron microscopy was utilized to thermally anneal Pd-TMV2Cys, thereby transforming them into PdNRs with amorphous carbon cores.

Preparing uniform supported Pd-Ni catalysts with citrate-assisted impregnation

Bimetallic supported catalysts can show synergistic effects compared to their monometallic constituents. However, it is challenging to produce bimetallic catalysts with a uniform nanoparticle distribution over the support, while ensuring each nanoparticle contains both metals. A promising strategy is to use impregnation precursors that facilitate uniform distribution of both metals over a support. In this work, citrate-based precursors were studied to prepare bimetallic Pd-Ni nanoparticles supported on SBA-15 mesoporous silica. Amongst others, cryo-electron microscopy demonstrated the excellent distribution of Ni citrate precursor after drying. Co-impregnation with Ni citrate precursor and Pd(OAc)2 or Pd(NH3)4(NO3)2 produced well-distributed Pd-Ni nanoparticles with a narrow particle size distribution. Extensive characterization with STEM-EDX, EXAFS and TPR showed that the type of Pd precursor controlled the Pd to Ni nanoscale intimacy. CO2 hydrogenation experiments demonstrated that increasing Pd-Ni intimacy decreased the activity. Our strategy to produce uniform Pd-Ni nanoparticles using citric acid is relevant also for other bimetallic systems.

Cyanogel-Induced Facile Synthesis of Palladium Hydride for Electrocatalytic Oxygen Reduction.

Palladium hydride (PdHx) is one of the well-known electrocatalytic materials, yet its synthesis is still a challenge through an energy-efficient and straightforward method. Herein, we propose a new and facile cyanogel-assisted synthesis strategy for the preparation of PdH0.649 at a mild environment with NaBH4 as the hydrogen source. Unlike traditional inorganic Pd precursors, the unique Pd-CN-Pd bridge in Pdx[Pd(CN)4]y ⋅ aH2O cyanogel offers more favourable spatial sites for insertion of H atoms. The characteristic three-dimensional backbone of cyanogel also acts as a support scaffold resulting in the interconnected network structure of PdH0.649. Due to the incorporation of H atoms and interconnected network structure, the PdH0.649 achieves a high half-wave potential of 0.932 V, a high onset potential of 1.062 V, and a low activation energy, as well as a long-term lifetime for oxygen reduction reaction. Theoretical calculation demonstrates a downshift of the d-band centre of Pd in PdH0.649 owing to the dominant Pd-H incorporation that weakens the binding energies of the *OH intermediate species. Zn-air batteries (ZAB) based on PdH0.649 exhibits high power density, competitive open circuit voltage, and good stability, exceeding that of commercial Pt black. This work not only opens up a new avenue for the development of high-efficiency Pt-free catalysts but also provides an original approach and insight into the synthesis of PdHx.

Ratio design of bimetallic Pd‐Rh nanoparticles on MoS2 nanosheets: Excellent electrocatalysts for hydrogen evolution reaction

The decrease in noble metal content presents an efficient approach to attain commercial, effective, and durable electrocatalysts for the hydrogen evolution reaction (HER) at a low fabrication cost. Nonetheless, achieving a proper balance between bimetallic loading ratios and HER performance remains challenging. In this study, a simple and environmentally friendly sonochemical method is employed to successfully synthesize bimetallic palladium–rhodium nanoparticles (Pd‐Rh) with varying ratios, confined within molybdenum disulfide (MoS2) nanosheets. Bimetallic Pd‐Rh/MoS2 composite with different ratios of Pd:Rh is synthesized by adjusting the feed ratio of Pd and Rh precursors (1:4, 1:1, and 4:1). The HER electrocatalytic activity of the bimetallic Pd1‐Rh1/MoS2 composite exhibits the lowest overpotential and a superior Tafel slope, closely rivaling the electrocatalytic activity of the commercial 20 wt% Pt/C. Furthermore, the bimetallic Pd1‐Rh1/MoS2 composite exhibits remarkable stability and durability, with almost negligible performance decay after 2000 cycles. These outstanding HER electrocatalytic properties of the bimetallic composite result from a higher number of active sites, a significantly larger electrochemically active surface area, reduced charge‐transfer resistance, and a larger double‐layer capacitance. These factors collectively facilitate faster adsorption and desorption of hydron on the surface of electrocatalyst.

Preparation of palladium-based catalyst by plasma-assisted atomic layer deposition and its applications in CO2 hydrogenation reduction

Supported Pd catalyst is an important noble metal material in recent years due to its high catalytic performance in CO2 hydrogenation. A fluidized-bed plasma assisted atomic layer deposition (FP-ALD) process is reported to fabricate Pd nanoparticle catalyst over γ-Al2O3 or Fe2O3/γ-Al2O3 support, using palladium hexafluoroacetylacetonate as the Pd precursor and H2 plasma as counter-reactant. Scanning transmission electron microscopy exhibits that high-density Pd nanoparticles are uniformly dispersed over Fe2O3/γ-Al2O3 support with an average diameter of 4.4 nm. The deposited Pd-Fe2O3/γ-Al2O3 shows excellent catalytic performance for CO2 hydrogenation in a dielectric barrier discharge reactor. Under a typical condition of H2 to CO2 ratio of 4 in the feed gas, the discharge power of 19.6 W, and gas hourly space velocity of 10000 h−1, the conversion of CO2 is as high as 16.3% with CH3OH and CH4 selectivities of 26.5% and 3.9%, respectively.

Freestanding Penta-Twinned Palladium Nanosheets.

Control over the morphology of nanomaterials to have a 2D structure and manipulating the surface strain of nanostructures through defect control have proved to be promising for developing efficient catalysts for sustainable chemical and energy conversion. Here a one-pot aqueous synthesis route of freestanding Pd nanosheets with a penta-twinned structure (PdPT NSs) is presented. The generation of the penta-twinned nanosheet structure can be succeeded by directing the anisotropic growth of Pd under the controlled reduction kinetics of Pd precursors. Experimental and computational investigations showed that the surface atoms of the PdPT NSs are effectively under a compressive environment due to the strain imposed by their twin boundary defects. Due to the twin boundary-induced surface strain as well as the 2D structure of the PdPT NSs, they exhibited highly enhanced electrocatalytic activity for oxygen reduction reaction compared to Pd nanosheets without a twin boundary, 3D Pd nanocrystals, and commercial Pd/C and Pt/C catalysts.

Effect of preparation conditions of nanocrystalline Pd/MgO catalysts on their performance in selective hydrogenation of acetylene

In the present work, an alkoxide sol-gel method was applied to prepare Pd/MgO catalysts. The sol-gel procedure was followed by supercritical drying (aerogels) or conventional drying (xerogels) in a furnace. These materials were compared with the impregnated samples. The Pd loading was 1 wt% in all the cases. The as-prepared catalysts were characterized by a set of physicochemical methods. Both the type of the Pd precursor and the preparation route were found to affect the porous structure of the materials as well as the dispersion of the palladium particles and their localization over the MgO support. Both the xerogel and incipient wetness impregnation methods lead to a narrower pore size distribution in comparison to the aerogel technique. The most dispersed particles with an average size of ∼ 2.0–2.2 nm were observed for the samples prepared by xerogel and impregnation methods. In the case of aerogel-prepared samples, metallic palladium particles possess bimodal distribution with average diameters of 4.3 and 8.4 nm. The best catalytic performance in acetylene hydrogenation to ethylene (50 % acetylene conversion at 37 °C with selectivity ∼60 %) was observed for the Pd/MgO catalyst prepared via the aerogel route using [Pd(NH3)4](NO3)2. Compared to other samples, this material is characterized by relatively weak metal-support interactions and the availability of active sites for reactants, which ensures the kinetic mode of the hydrogenation reaction (Ea = 74.9 kJ/mol).

Ir-Doped CuPd Single-Crystalline Mesoporous Nanotetrahedrons for Ethylene Glycol Oxidation Electrocatalysis: Enhanced Selective Cleavage of C-C Bond.

The development of highly efficient electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells is of decisive importance to hold higher energy efficiency. Despite some achievements, their progress, especially electrocatalytic selectivity to complete oxidated C1 products, is remarkably slower than expected. In this work, we developed a facile aqueous synthesis of Ir-doped CuPd single-crystalline mesoporous nanotetrahedrons (Ir-CuPd SMTs) as high-performance electrocatalyst for promoting oxidation cleavage of C-C bond in alkaline EG oxidation reaction (EGOR) electrocatalysis. The synthesis relied on precise reduction/co-nucleation and epitaxial growth of Ir, Cu and Pd precursors with cetyltrimethylammonium chloride as the mesopore-forming surfactant and extra Br- as the facet-selective agent under ambient conditions. The products featured concave nanotetrahedron morphology enclosed by well-defined (111) facets, single-crystalline and mesoporous structure radiated from the center, and uniform elemental composition without any phase separation. Ir-CuPd SMTs disclosed remarkably enhanced electrocatalytic activity and excellent stability as well as superior selectivity of C1 products for alkaline EGOR electrocatalysis. Detailed mechanism studies demonstrated that performance improvement came from structural and compositional synergies, which kinetically accelerated transports of electrons/reactants within active sites of penetrated mesopores and facilitated oxidation cleavage of high-energy-barrier C-C bond of EG for desired C1 products. More interestingly, Ir-CuPd SMTs performed well in coupled electrocatalysis of anode EGOR and cathode nitrate reduction, highlighting its high potential as bifunctional electrocatalyst in various applications.

Ir‐Doped CuPd Single‐Crystalline Mesoporous Nanotetrahedrons for Ethylene Glycol Oxidation Electrocatalysis: Enhanced Selective Cleavage of C−C Bond

AbstractThe development of highly efficient electrocatalysts for complete oxidation of ethylene glycol (EG) in direct EG fuel cells is of decisive importance to hold higher energy efficiency. Despite some achievements, their progress, especially electrocatalytic selectivity to complete oxidated C1 products, is remarkably slower than expected. In this work, we developed a facile aqueous synthesis of Ir‐doped CuPd single‐crystalline mesoporous nanotetrahedrons (Ir‐CuPd SMTs) as high‐performance electrocatalyst for promoting oxidation cleavage of C−C bond in alkaline EG oxidation reaction (EGOR) electrocatalysis. The synthesis relied on precise reduction/co‐nucleation and epitaxial growth of Ir, Cu and Pd precursors with cetyltrimethylammonium chloride as the mesopore‐forming surfactant and extra Br− as the facet‐selective agent under ambient conditions. The products featured concave nanotetrahedron morphology enclosed by well‐defined (111) facets, single‐crystalline and mesoporous structure radiated from the center, and uniform elemental composition without any phase separation. Ir‐CuPd SMTs disclosed remarkably enhanced electrocatalytic activity and excellent stability as well as superior selectivity of C1 products for alkaline EGOR electrocatalysis. Detailed mechanism studies demonstrated that performance improvement came from structural and compositional synergies, which kinetically accelerated transports of electrons/reactants within active sites of penetrated mesopores and facilitated oxidation cleavage of high‐energy‐barrier C−C bond of EG for desired C1 products. More interestingly, Ir‐CuPd SMTs performed well in coupled electrocatalysis of anode EGOR and cathode nitrate reduction, highlighting its high potential as bifunctional electrocatalyst in various applications.

Rapid Synthesis of Noble Metal Colloids by Plasma-Liquid Interactions.

The interactions between plasma and liquids cause complex physical and chemical reactions at the gas-liquid contact surface, producing numerous chemically active particles that can rapidly reduce noble metal ions. This study uses atmospheric-pressure surface dielectric barrier discharge (DBD) plasma to treat ethanol aqueous solutions containing noble metal precursors, and stable gold, platinum, and palladium colloids are obtained within a few minutes. To evaluate the mechanism of the reduction of noble metal precursors by atmospheric-pressure surface DBD plasma, the corresponding metal colloids are prepared first by activating an ethanol aqueous solution with plasma and then adding noble metal precursors. It is found that the long-lived active species hydrogen peroxide (H2O2) plays a dominant role in the synthesis process, which has distinct effects on different metal ions. When HAuCl4 and H2PdCl4 are used as precursors, H2O2 acts as a reducing agent, and AuCl4- and PdCl42- ions can be reduced to metallic Au and Pd. However, when AgNO3 is the precursor, H2O2 acts as an oxidising agent, and Ag+ ions cannot be reduced to obtain metal colloids because metallic Ag can be dissolved in H2O2 under acidic conditions. A similar phenomenon was also observed for the preparation of Pd colloid-PA with a plasma-activated ethanol aqueous solution using Pd(NO3)2 as a Pd precursor.

Quantitative Study on the Influence of Bromide Ions toward the Reduction Kinetics for Size-Tunable Palladium Nanocubes.

During the preparation of nanocrystals, regulating the dosage of key additives in the reaction system and the reaction temperature commonly affects the sizes and morphologies of the products. Despite the fact that bromide ions play a pivotal role in the synthesis of palladium nanocubes (Pd NCs), there is still a lack of quantitative and in-depth research on how the ions affect the reduction kinetics of Pd precursors and further on products. In this work, Pd NCs with different sizes have been prepared under various reaction conditions coupled to a systematic mechanism study. Quantitative measurements demonstrate that the reduction processes could be considered quasi-first-order reactions, and the corresponding kinetic parameters have been obtained. Furthermore, a linear relationship is discovered between k and the average size (d) of Pd NCs. The investigation on the growth patterns of four chosen systems reveals that given reaction conditions lead to certain results with unique growth patterns.

Synthesis of Pd/Carbon Hollow Spheres by the Microwave Discharge Method for Catalytic Debenzylation.

Pd/C catalysts have been widely applied in the debenzylation process due to their excellent ability of hydrogenolysis. However, they have been suffering from the problems of agglomeration and loss of active components, which lead to decreased and unstable activity. Thus, it is still a challenge to achieve Pd/C catalysts with high activity and stability. Herein, we propose a strategy for preparing Pd/C catalysts on porous carbon hollow spheres by a microwave discharge method. Due to the high-temperature property and reducibility of microwave discharge, Pd precursors can be rapidly reduced, resulting in well-dispersed Pd nanoparticles with a small size on the carbon carrier. Besides, the matched mesopores in the carbon hollow spheres can anchor Pd nanoparticles and effectively reduce the agglomeration and loss of Pd nanoparticles during the catalytic reaction. As a result, the as-prepared Pd/mesoporous carbon hollow spheres exhibit high and stable activity in the debenzylation reaction.

Systematic Study on the Precursor Reduction Kinetics and Growth Pattern for Size-Tunable Palladium Nanocubes.

Unveiling the underlying chemistry during the growth of well-defined nanocrystals is a fundamental but challenging task in materials chemistry. Herein, Pd NCs with tunable sizes ranging from 4.5 to 23.5 nm have been synthesized in the presence of potassium acetate (KOAc). The Pd precursor variation trends of these preparation systems along with reaction time have been determined using a UV-vis spectrometer, and corresponding reduction kinetic parameters, including the apparent reduction rate constant (k) and activation energy (Ea), are calculated by regarding the reduction processes as quasi-first-order reactions. It is confirmed that the introduction of KOAc does not affect the value of the Ea of different reaction systems. The interrelationship of k, product size (d), and reaction temperature (T) is discussed in depth. Results indicate that the three parameters are closely related, and for given reaction systems, they are specified. With the careful investigation of six specific systems (reaction systems with 10 mM, 20 mM KOAc at 55 °C, with 5 mM, 10 mM KOAc at 65 °C, without KOAc at 75 °C, and with 5 mM KOAc at 85 °C), the growth pattern of Pd NCs is described with an empirical expression and is further confirmed as a synergistic result of k and T.