Pd-catalyzed Asymmetric Allylic Substitution Reactions Research Articles

Application of mixed phosphorus/sulfur ligands based on terpenoids in Pd-catalyzed asymmetric allylic substitution and Rh-catalyzed hydrogenation.

A small library of easily prepared diamidophosphite-sulfides based on 1,3-thioether alcohols, primarily of terpenoid nature, was developed. Upon complexation with Pd(II) ions, these hemilabile ligands showed the ability to form both P,S-chelates and complexes with two ligands P-monodentately bonded to the metal. The structures of the ligands and their complexes were determined by 2D NMR spectroscopy and X-ray diffraction. The use of these stereoselectors provided up to 95% ee in the classic Pd-catalyzed asymmetric allylic substitution reactions of (E)-1,3-diphenylallyl acetate with C- and N-nucleophiles and up to 80% ee in the Pd-mediated allylic alkylation of cinnamyl acetate with β-ketoesters. In addition, ee values of up to 90% with quantitative conversion were achieved in the Rh-catalyzed asymmetric hydrogenation of methyl esters of unsaturated acids. The effects of the structural parameters, reaction conditions and ligand-to-metal ratio on the catalytic results are discussed.

Axially chiral N-alkyl-N-cinnamoyl amide type P,olefin ligands for Pd-catalyzed reactions.

We synthesized N-alkyl-N-cinnamoyl amide type phosphine-olefin compounds 1 and found axial chirality in a C(aryl)-N(amide) bond in compounds 1 by HPLC analysis using a chiral stationary phase column. We successfully obtained enantiomeric isomers of 1 and demonstrated the use of (-)-1 for chiral ligands in Pd-catalyzed asymmetric allylic substitution reactions of allylic esters with indoles (up to 97% ee).

Cinnamoyl amide type chiral P,olefin ligands for Pd-catalyzed reactions.

We synthesized cinnamoyl amide type chiral P,olefin ligand (S)-4. We successfully obtained separable diastereomers of 4d and demonstrated Pd-catalyzed asymmetric allylic substitution reactions of indoles using (S,aS)-4d as a chiral ligand with high enantioselectivities (up to 98% ee).

Chiral P,Olefin Ligands with Rotamers for Palladium-Catalyzed Asymmetric Allylic Substitution Reactions

We synthesized a series of phosphine–olefin-type chiral aminophosphines, and we confirmed that these each exists as two rotamers at the C(aryl)–N(amine) bond. We also investigated the ability of these aminophosphines to act as chiral ligands for Pd-catalyzed asymmetric allylic substitution reactions, such as the alkylation of allylic acetates with malonates or indoles, and we found they gave high enantio­selectivities (up to 98% ee).

Synthesis of novel chiral biquinolyl diphosphine ligand and its applications in palladium-catalyzed asymmetric allylic substitution reactions

A novel chiral diphosphine ligand, 6,6′-bis(diphenylphosphino)-5,5′-biquinoline (BIQAP) was synthesized via two step reactions using optical pure BIQOL as starting material and the molecular structure of (R)-BIQAP was determined by single-crystal X-ray diffraction. The ligand was used for Pd-catalyzed asymmetric allylic substitution reactions. High enantioselectiveties were obtained in the corresponding C–C and C–N bond formation of 1,3-diphenyl-2-propenyl acetate, with dimethyl malonate (up to 94% ee) and with potassium phthalimide (up to 96% ee).

Catalytic enantioselective synthesis of planar-chiral cyclic amides based on a Pd-catalyzed asymmetric allylic substitution reaction.

The highly enantioselective synthesis of planar-chiral nine-membered cyclic amides was achieved by the Pd-catalyzed asymmetric allylic cyclization of achiral linear precursors in the presence of a catalytic amount of chiral ligand.

Mechanistic insights into the Pd-catalyzed intermolecular asymmetric allylic dearomatization of multisubstituted pyrroles: understanding the remarkable regio- and enantioselectivity.

In this article we report a comprehensive density functional theory study on the Pd-catalyzed intermolecular asymmetric allylic dearomatization reactions of multisubstituted pyrroles. The calculated results are in line with the previous experimental observations (J. Am. Chem. Soc. 2014, 136, 6590), and the remarkable regio- and enantioselectivity are well explained. Of all the potential nucleophilic sites around the multisubstituted pyrrole ring, the reaction always occurs at the position where the HOMO of the molecule distributes most significantly. In contrast to the common view on the enantioselectivity of the Pd-catalyzed asymmetric allylic substitution reactions, we find that the steric interaction between the nucleophile and the chiral ligand does not have the dominating effect on the enantioselectivity of the reaction. Instead, the interaction between the allyl moiety and the incoming nucleophile plays an important role in the enantioselectivity-determining process.

Novel pyridine-phosphite ligands for Pd-catalyzed asymmetric allylic substitution reaction

A series of novel chiral pyridine-phosphite ligands, synthesized from PCl3, chiral BINOL and 4H-quinolyl alcohols, have been successfully applied in the Pd-catalyzed asymmetric allylic substitution reaction, which afforded the substituted products with high enantioselectivities (up to 95% ee).

Organic Carbonates as Alternative Solvents for Palladium‐Catalyzed Substitution Reactions

Organic carbonates, such as propylene carbonate, butylene carbonate, and diethyl carbonate, were tested in the Pd-catalyzed asymmetric allylic substitution reactions of rac-1,3-diphenyl-3-acetoxy-prop-1-ene with dimethyl malonate or benzylamine as nucleophiles. Bidentate diphosphanes were used as chiral ligands. The application of monodentate phosphanes capable of self-assembling with the metal was likewise tested. In the substitution reaction with dimethyl malonate, enantioselectivities up to 98% were achieved. In the amination reaction, the chiral product was obtained with up to 83% ee. The results confirm that these "green solvents" can be advantageously used for this catalytic transformation as an alternative to those solvents usually employed which run some risk of being harmful to the environment.

Pd‐catalyzed asymmetric allylic substitution reactions using P‐chirogenic diaminophosphine oxides: DIAPHOXs

This paper describes the development of a new class of chiral phosphorus ligand: aspartic acid-derived P-chirogenic diaminophosphine oxides, DIAPHOXs, and their application to several Pd-catalyzed asymmetric allylic substitution reactions. Pd-catalyzed asymmetric allylic alkylation was initially examined in detail using diaminophosphine oxides 1a, resulting in the highly enantioselective construction of quaternary stereocenters. Mechanistic investigations revealed that 1a is activated by N,O-bis(trimethylsilyl)acetamide-induced tautomerization to afford a trivalent diamidophosphite species 12, which functions as the actual ligand. Furthermore, asymmetric allylic amination was examined using Pd-DIAPHOX catalyst systems, providing a variety of chiral allylic amines.

First Chiral Phosphoroamidite-phosphite Ligands for Highly Enantioselective and Versatile Pd-Catalyzed Asymmetric Allylic Substitution Reactions

[reaction: see text] A series of phosphite-phosphoroamidite ligands, derived from readily available d-xylose, has been successfully applied for the first time in the Pd-catalyzed allylic substitution of several substrates with different steric and electronic properties, with high enantioselectivities (ee's up to 98) and activities in standard conditions.

Furanoside thioether–phosphinite ligands for Pd-catalyzed asymmetric allylic substitution reactions: Scope and limitations

A series of readily available thioether–phosphinite ligands has been tested in the Pd-catalyzed allylic substitution reactions of several acyclic and cyclic allylic substrates ( S1– S7). This series of ligands have been designed to uncover their important structural features and to determine the scope of the thioether–phosphinite ligands in these catalytic reactions. Systematic variation of the electronic and steric properties at the thioether moiety provide useful information about the ligand parameters that control the enantiodiscrimination. By carefully selecting the ligand parameters, good enantioselectivities with high activities were obtained for hindered linear substrates S1 and S2 (ee’s up to 95%) and for unhindered cyclic substrates S4 and S5 (ee’s up to 91%).

New Carbohydrate‐Based Phosphite‐Oxazoline Ligands as Highly Versatile Ligands for Palladium‐Catalyzed Allylic Substitution Reactions

AbstractWe have designed and synthesized a new family of readily available phosphite‐oxazoline ligands for Pd‐catalyzed asymmetric allylic substitution reactions. These ligands can be tuned in two regions to explore their effect on catalytic performance. By carefully selecting the ligand components, we obtained high enantioselectivities in the Pd‐catalyzed allylic substitution in substrates with different steric properties

Modular Furanoside Diphosphite Ligands for Pd‐Catalyzed Asymmetric Allylic Substitution Reactions: Scope and Limitations

AbstractWe have synthesized a library of furanoside diphosphite ligands for the Pd‐catalyzed allylic substitution reactions of acyclic and cyclic allylic esters. The library has been designed to rapidly screen the ligands to uncover their important structural features and to determine the scope of diphosphite ligands in these catalytic reactions. After the systematic variation of the sugar backbone, the substituent at C‐5 and the phosphite moieties, the diphosphite ligand 4c was found to be optimal in the Pd‐catalyzed asymmetric allylic substitution of hindered (S1) and unhindered (S2–S5) substrates, yielding high activities [TOFs up to >3000 mol×(mol×h)−1] and enantioselectivities (ees up to 99%). In addition, the screening of the library enabled us to find other suitable ligands for hindered disubstituted linear substrate S1 (ligands 1b–d, g and 4b, d, g) and for unhindered cyclic substrates S3–S5 (ligands 6c and 7c).

New Phosphite−Oxazoline Ligands for Efficient Pd-Catalyzed Substitution Reactions

We have designed and synthesized a new family of readily available highly modular phosphite-oxazoline ligands for the Pd-catalyzed asymmetric allylic substitution reactions. The introduction of a pi-acceptor flexible bulky biphenyl phosphite moiety in the ligand design is highly adventitious in the product outcome. Thus, this ligand series affords excellent reaction rates (TOF's up to >2400 mol.(mol.h)-1) and enantioselectivities (ee's up to >99%) and, at the same time, shows a broad scope for different substrate types.

Furanoside thioether–phosphinite ligands for Pd-catalyzed asymmetric allylic substitution reactions

A new series of thioether–phosphinite ligands, easily prepared in a few steps from inexpensive d-(+)-xylose, was tested in the Pd-catalyzed allylic substitution of substrates with different steric properties. The results show that the enantiomeric excesses are strongly dependent on the steric properties of the substituent in the thioether moiety. Enantiomeric excesses of up to 93% with high activities were obtained for the substrate rac-1,3-diphenyl-3-acetoxyprop-1-ene 7 with dimethyl malonate as the nucleophile.

New types of soluble polymer-supported bisphosphine ligands with a cyclobutane backbone for Pd-catalyzed enantioselective allylic substitution reactions.

A highly efficient and practical optical resolution of anti head-to-head racemic coumarin dimer 7 has been achieved by molecular complexation with TADDOL, (-)-8, through a hydrogen bonding interaction to afford the corresponding two enantiomers, (-)- and (+)-7, in 70 and 75 % yields, respectively, with >99 % ee. Starting from enantiopure (-)-7, a new type of C2-symmetric bisphosphine ligand (S,S,S,S)-3 with a cyclobutane backbone has been synthesized in good yield by facile transformations. The asymmetric induction efficiency of these chiral bisphosphine ligands in Pd-catalyzed asymmetric allylic substitution reactions was evaluated. Under the experimental conditions, the allylic substitution products could be obtained in excellent yields (up to 99 %) and enantioselectivities (up to 98.9 % ee). By taking advantage of the high enantioselectivity of this catalytic reaction and the easily derivable carboxylate groups on the cyclobutane backbone of ligand (S,S,S,S)-3, a new type of analogous ligand (S,S,S,S)-4 as well as the MeO-PEG-supported soluble ligand (S,S,S,S)-5 (PEG=polyethylene glycol) have also been synthesized and utilized in asymmetric allylic substitution reactions. In particular, the MeO-PEG supported (S,S,S,S)-5 b had a synergistic effect on the enantioselectivity of the reaction compared with its nonsupported precursor (S,S,S,S)-4 c, affording the corresponding allylation products 14 a and 14 b with excellent enantioselectivities (94.6 and 97.2 % ee, respectively). Moreover, the Pd complex of (S,S,S,S)-5 b could easily be recovered and recycled several times without significant loss of enantioselectivity and activity in the allylic substitution reactions.

Synthesis of New Chiral Benzylically Substituted P,N‐Ligands and Their Applications in the Asymmetric Heck Reaction.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Synthesis of new chiral benzylically substituted P, N-ligands and their applications in the asymmetric Heck reaction

A series of new chiral P, N-ligands with substituents at the benzylic position has been prepared. Their high catalytic activity is shown in the Pd-catalyzed asymmetric Heck reaction and allylic substitution reaction.

New Enantiopure Cyclic β‐Iminophosphine Ligands: Applications in Pd‐Catalyzed Asymmetric Allylic Substitution.

AbstractFor Abstract see ChemInform Abstract in Full Text.