Retention Of Particulate Matter Research Articles

Process of mercury accumulation in urban strip river artificial wetland ecosystems: a case study of Changchun, a typical industrial city in Northeast China.

Mercury (Hg), as a global pollutant, is persistent, migratory, insidious, highly biotoxic and highly enriched, and is widely distributed in the atmosphere, hydrosphere, biosphere and lithosphere. Wetland ecosystems, as active mercury reservoirs, have become the most important sources and sinks of heavy metal mercury. Distinguished from natural wetlands, artificial wetlands located in urban sections of rivers face problems such as diverse urban pollution sources and complex spatial and temporal changes. Therefore, in this study, five intermittently distributed artificial wetlands were selected from the upstream to the downstream of the Changchun section of the Yitong River, a tributary of the Songhua River basin in the old industrial base of Northeast China. The mercury levels in the water bodies, sediments and plants of the artificial wetlands were collected and tested in four quarters from April 2023 to analyse the spatial and temporal distribution characteristics of total mercury. The results showed that the mercury levels in the water bodies, sediments and plants of the five wetlands showed a fluctuating trend with the river flow direction and had certain spatial and temporal distribution characteristics. This phenomenon was attributed to the sinking of external mercury pollution sources. In general, the wetland ecosystems showed a decreasing trend in the total Hg output of the downstream watershed. This may be due to the retention of particulate matter by aquatic plants in artificial wetlands to regular salvage of dead aquatic plants. At the same time urbanization and industrialization affect mercury levels in aquatic environments, so the risk of residential exposure needs to be looked at.

A Study on the Leaf Retention Capacity and Mechanism of Nine Greening Tree Species in Central Tropical Asia Regarding Various Atmospheric Particulate Matter Values

With the rapid advancement of the global economy, there has been a noticeable escalation in the level of inhalable particulate matter (PM) pollution in the atmosphere. The utilization of plants has been recognized as an effective means to mitigate the escalation in the atmospheric PM concentration through the capture and retention of this particulate matter on their leaves. This research focuses on investigating the PM retention capacity of nine commonly found greening plant species in Changsha, China, located in the country’s mid-subtropical region. In this study, we employed an air aerosol generator (QRJZFSQ-II) and a portable leaf area meter (LI-3000C) to systematically evaluate the PM retention in unit leaf area for different PM values. In addition, the leaf surface structure was observed via scanning electron microscopy, and the relationship between the leaf microstructure and the retained particles was quantitatively analyzed. The results showed that (1) there were significant differences in the retention of TSP, PM10, and PM2.5 per unit leaf area among the nine greening tree species analyzed. Rosa saturata was found to have the best retention effect regarding TSP and PM2.5, and Rhododendron simsii was found to have the best retention effect regarding PM10. (2) There were significant differences in the contents of TSP and PM2.5 per leaf area among the different tree species with different life forms (p < 0.05), with the order of retention being shrub > arbor (needle leaves) > arbor (broad leaves). (3) Coniferous plants have a deep leaf surface texture, which is conducive to capturing more particles on their leaf surface, and (4) the long stomata diameter was significantly negatively correlated with PM retention, and the stomata density was significantly positively correlated with PM retention. However, the short diameter and small area of stomata demonstrated no significant correlation with PM retention (p < 0.05). Considering the selection of suitable tree species for greening in urban air pollution control, we suggest that Osmanthus fragrans, Pseudolarix amabilis, Rosa saturata, and Rhododendron simsii be used more frequently in urban areas affected by severe air pollution.

Assessment of Particulate Matter, Heavy Metals, and Carbon Deposition Capacities of Urban Tree Species in Tehran, Iran

Air pollution is a pressing environmental concern in urban areas, with particulate matter (PM) posing serious health and environmental threats. Urban greening has emerged as a potential solution to capture and retain PM. This study assesses the PM deposition capacity of five common tree species: Morus alba (M. alba), Ailanthus altissima (A. altissima), Platanus orientalis (P. orientalis), Robinia pseudoacacia (R. pseudoacacia), and Ulmus minor (U. minor) in two highly polluted sites in Tehran, Iran. Additionally, this study investigates the accumulation of heavy metals (Ni, Fe, Cd, and Pb), Organic Carbon (OC), Elemental Carbon (EC), and Total Carbon (TC) on the leaves of these tree species. The results demonstrate species-specific differences in PM deposition capacity, with U. minor and M. alba showing high PM retention. A. altissima exhibits strong capability in adsorbing PM 0.1–2.5, while U. minor demonstrates greater retention of PM > 2.5. Moreover, the deposition of heavy metals varies among species, with R. pseudoacacia and A. altissima capturing higher levels. This study highlights the significance of appropriate tree utilization in urban environments against air pollution in order to make the air healthier in major cities. Awareness of the different tree species capacities leads urban planners and policymakers to make intelligent decisions about urban greening initiatives to improve air quality and overall well-being.

Atmospheric particulate matter retention capacity of bark and leaves of urban tree species

Urban vegetation can effectively filter and adsorb particulate matter (PM). However, limited studies have been conducted on the PM retention capacity of tree barks. This study investigated the ability of five common urban tree species in the Yangtze River Delta region to retain PM through their barks and leaves by conducting a 14-day tree PM retention experiment on the five tree species during autumn and winter. The results showed that (1) the PM retention per unit area of bark was 6.9 times and 11.8 times higher than that of leaves during autumn and winter, respectively; (2) when considering total surface area, bark and leaves exhibited comparable PM retention capacities at the whole-plant scale; (3) the ability of bark to retain PM is species-specific, which can be attributed to different bark morphology among different tree species; and (4) bark and leaves exhibited distinct preferences for retaining PM of different particle sizes, even when exposed to similar environmental conditions. This study highlights the remarkable ability of tree bark to PM removal and provides valuable insights into the role of urban trees in mitigating PM pollution. Furthermore, these findings can provide valuable insights into studies on dry deposition modelling, urban planning, and green space management strategies.

Characterizing accumulation and negative effects of aerosol particles on the leaves of urban trees

Urban vegetation can alleviate particulate matter (PM) pollution. Many studies examined the PM retention efficiencies of different plant species, but the PM changes retained on leaf surfaces and their effects on plant leaves have rarely been explored. In this study, two common urban greening tree species of the Yangtze River Delta (i.e., Broussonetia papyrifera and Osmanthus fragrans) were selected to explore the compositions of retained PM and assess their adverse impacts on leaf functional traits. Compared with B. papyrifera, O. fragrans with higher wax content was more efficient in particle accumulation, specifically fine (Φ ≤ 2.5 μm) and coarse (2.5 < Φ ≤ 10 μm) particles. The number density and mass concentration of retained PM on plant leaves tended to increase during the accumulation period. Plant species and accumulation time were two major factors to influence particle retention efficiency. Interestingly, the accumulation of particle retention influenced leaf functional traits, such as photosynthesis rate, stomatal conductance, and transpiration rate. The microscopic observations of PM on leaves confirmed that the toxic components of the retained particles potentially caused leaf injury and stomatal damage. Therefore, the acclimation mechanisms of plants responding to the retained urban aerosols should be paid attention in highly polluted areas.

Size distribution and elemental composition of airborne particulate matter on four plant species in vertical greenery systems

Vertical greenery systems (VGSs) have been proven to greatly improve the urban thermal environment. However, their effect on the retention of airborne particulate matter (PM) in the road environment remains unclear. This study aimed to assess the quantity of size-segregated PMs on both the upper (adaxial) and lower (abaxial) leaf surfaces, the mass of size-segregated PMs on the leaf surface and within the leaf wax, as well as the elemental composition of PMs retained in leaf stomata of four plant species in VGSs in Guangzhou. The findings revealed that VGSs exhibited greater retention of fine (<2.5 μm) PMs when compared to coarse (2.5–10 μm) and large (>10 μm) PMs. Among the four species studied, Tradescantia spathacea exhibited the highest PM retention in VGSs. The number density of accumulated PMs on the upper and lower leaf surfaces of the four plant species of VGSs at three heights varied significantly with species, heights, and their interaction (P < 0.05). The greatest stomatal block rate by PM occurred at a height of 0.6 m, the range was 91.1%–98.0%. The composition of PMs retained by the leaves primarily consisted of common element of C, O, Ca, K, Mg, and Si, which likely originated from natural sources. Heavy metals (HMs) such as Cr and Cd may have originated from brakes, while Zn and Cu might be attributed to tire wear and exhaust emissions. Therefore, VGSs effectively retained a substantial quantity of airborne PM and contributed to the mitigation of urban air pollution issues.

Synergy of different leaf traits determines the particulate matter retention capacity and its susceptibility to rain wash-off

Rainfall plays a crucial role in the removal of particulate matter (PM) from plant leaves, influencing PM retention and the environmental behaviour of harmful substances that accumulate in PM. This study examined the PM retention capacity, particle size distributions, and wash-off rates of leaf surface PM from three common green tree species in northern China during two natural rainfall events (light rain: 8.3 mm; heavy rain: 54.2 mm), to investigate the relationship between the leaf traits, PM retention capacity, and PM wash-off process. Our results found that leaf morphometric characteristics, such as leaf size, length, width, and aspect ratio (length-to-width), had a negative and significant correlations with the PM retention capacity, but had no significant correlation with the leaf surface PM wash-off rate. Smaller leaves with low aspect ratios exhibited greater stability under external disturbances than large leaves with high aspect ratios, resulting in a higher PM retention capacity and lower wash-off rate. Ridges and grooves enhanced the PM retention capacity by increasing the leaf roughness. Rainfall could wash off all particle size ranges of leaf surface PM without altering their mechanical composition. Larger particles were more easily washed off. Euonymus japonicus, with its small leaf size and low aspect ratio, exhibited the highest PM retention capacity. Its curled leaf shape also hindered light rain from washing off leaf surface PM. Forsythia suspensa, with denser grooves and ridges compared with Prunus serrulata, exhibited a rougher leaf surface and higher PM retention capacity. However, this roughness may reduce wettability, making it easier for runoff to form on the leaf surface and dislodge leaf surface PM, resulting in F. suspensa having the highest wash-off rate. Our results highlight the synergy of different leaf traits on PM retention capacity and the PM stability after rainfall.

Leaf micromorphology affects the particulate matter retention in herbaceous plants: An in situ interspecies comparison

AbstractGarden plants can absorb and retain atmospheric particles and are important for remediating environmental pollution. As an important biological constituent of urban landscape, herbaceous plants can provide ecosystem service such as particulate matter (PM) retention. However, the evaluation of this ecosystem service for herbaceous plants has been seldom made. The present study compared the PM retention capacity of four herbaceous plants commonly used for urban greening in North China—Liriope spicata (Thunb.) Lour., Lolium perenne L., Festuca elata Keng ex E.B.Alexeev, and Poa pratensis L. and explored the correlation between leaf micromorphological traits and PM retention using an in situ experiment. PM with different particle sizes, including PM&gt;10 (10–100 µm), PM10 (2.5–10 µm), and PM2.5 (&lt;2.5 µm), were separately evaluated. We found that L. spicata had the greatest PM retention capacity for all particle sizes among the four species. Electron microscopy revealed that leaves with higher groove proportion, larger stomatal size and greater densities of stomata and trichome generally had higher PM retention capacity. The study showed the correlation between leaf micromorphology and PM absorption, providing a scientific basis for further quantitative studies on the ecosystem service of PM absorption provided by herbaceous plants.

Differences in particulate matter retention and leaf microstructures of 10 plants in different urban environments in Lanzhou City.

Particulate matter (PM) is a major primary environmental air pollutant and poses a threat to human health. Differences in the environment and leaf microstructures of plants will result in varying abilities to retain PM, but the effects of changes in these factors on PM retention are not yet well understood. This study selected 10 plant species in four urban areas (sports field, park, residential green space, and greenway) as the study objects. The amount of retained PM by the different species was measured, and the leaf microstructures were observed. It was found that the environment significantly affected both PM retention and leaf microstructure. The ranking of PM retention in the 10 species in four areas was greenway > residential green space > park > sports field. The ranking of average stomatal width and length was park > sports field > residential green space > greenway, while that of average stomatal density was greenway > residential green space > park > sports field. Different environments affected the length and density of trichomes in the leaves. These changes represented the adaptation of plant species to the growth environment. The stomata and grooves of the leaf surface significantly affected the ability of plants to retain PM. The amount of PM retained by different species varied. In all four urban areas, Prunus × cistena N. E. Hansen ex Koehne (purple leaf sand cherry), Prunus cerasifera Ehrhart f. atropurpurea (Jacq.) Rehd. (cherry plum), Buxus sinica var. parvifolia M. Cheng (common boxwood), and Ligustrum × vicaryi Rehder (golden privet) showed strong PM retention. The results of this study will provide information for planners and urban managers for the selection of plant species.

Foliar particulate matter retention and toxic trace element accumulation of six roadside plant species in a subtropical city

As a major source of air pollution, particulate matter (PM) and associated toxic trace elements pose potentially serious threats to human health and environmental safety. As is known that plants can reduce air PM pollution. However, the relationship between PM of different sizes and toxic trace elements in foliar PM is still unclear. This study was performed to explore the association between PM of different sizes (PM2.5, PM10, PM>10) and toxic trace elements (As, Al, Cu, Zn, Cd, Fe, Pb) as well as the correlation among toxic trace elements of six roadside plant species (Cinnamomum camphora, Osmanthus fragrans, Magnolia grandiflora, Podocarpus macrophyllus, Loropetalum chinense var. rubrum and Pittosporum tobira) in Changsha, Hunan Province, China. Results showed that P. macrophyllus had the highest ability to retain PM, and C. camphora excelled in retaining PM2.5. The combination of P. macrophyllus and C. camphora was highly recommended to be planted in the subtropical city to effectively reduce PM. The toxic trace elements accumulated in foliar PM varied with plant species and PM size. Two-way ANOVA showed that most of the toxic trace elements were significantly influenced by plant species, PM size, and their interactions (P < 0.05). Additionally, linear regression and correlation analyses further demonstrated the homology of most toxic trace elements in foliar PM, i.e., confirming plants as predictors of PM sources as well as environmental monitoring. These findings contribute to urban air pollution control and landscape configuration optimization.

Leaf surface functional traits influence particulate matter and polycyclic aromatic hydrocarbons air pollution mitigation: Insights from Mediterranean urban forests

In this work the leaf surface functional traits, potentially useful for air phytoremediation of particulate matter (PM) and polycyclic aromatic hydrocarbons (PAH), of 28 woody species have been characterized, and the role of these stomata, trichomes and cuticle traits in phytoremediation have been assessed looking at existing correlations with species-specific ability to sequester and retain airborne pollutants. Leaves were sampled in urban area in August and September and functional traits were measured using Scanning Electron Microscopy and Fourier-transform infrared spectroscopy. Pollutants were extracted by leaves and their concentrations and daily uptake rates were measured using gas chromatography. Significant differences were found between species in the arrangement of functional traits, concentrations and daily uptake of pollutants. Correlations between variables were studied by means of principal component analysis. The trichomes-related traits scaled positively with PM concentration daily uptake, whereas for PAH air phytoremediation, the cuticle physical and chemical features are relevant. Trichomes increase the leaf area several fold providing extra surfaces for PM retention, while cuticle thickness and esterification regulate the PAH retention and translocation in subcuticular tissues. Results provide novelty on the relationships between leaf surface functional traits and plant species phytoremediation potential, outlining an innovative way of measuring leaf surface functional traits. In addition to broadening the economic spectrum of functional traits, it is emphasized how important leaf surface functional traits are in the nature-based solutions definition and planning.

Species-specific influence of powdery mildew mycelium on the efficiency of PM accumulation by urban greenery.

Particulate matter (PM) is one of the most important air pollutants, especially in urban areas. The efficiency of PM biofiltration by plants depends on the morphological features of the foliage. More PM is deposited on complex leaves, covered with thick wax layer, trichomes, epidermal glands, and convex venation. Very few literature reports suggest that also the presence of mycelium of nonparasitic and saprophytic fungi positively affects the accumulation of PM on the leaves. In this work, to our best knowledge, for the first time the effect of the mycelium of the parasitic powdery mildew on the efficiency of PM accumulation by urban greenery was studied. Uninfested and fungus-infested leaves of Acer negundo L., Malus domestica Borkh Quercus robur L., and Berberis vulgaris L. were harvested in July in the center of Warsaw city. The effect of powdery mildew infection on PM accumulation was species-specific. A higher amount of PM on leaves not infected with powdery mildew was found in M. domestica and Q. robur, while in A. negundo and B. vulgaris more PM was accumulated on leaves infected with fungus. All species (except A. negundo) accumulated more of the PM of 0.2-2.5-μm and 2.5-10-μm size fractions on leaves not infected with powdery mildew. One of the greatest consequences of the presence of powdery mildew mycelium on the foliage is most probably reduction of the direct involvement of waxes in PM accumulation and retention processes.

Understanding Particulate Matter Retention and Wash-Off during Rainfall in Relation to Leaf Traits of Urban Forest Tree Species

Dynamic particulate matter (PM) behavior on leaves depends on rainfall events, leaf structural and physical properties, and individual tree crowns in urban forests. To address this dependency, we compared the observed relationships between PM wash-off ability and leaf traits on inner and outer crown-positioned leaves during rainfall events. Data showed significant differences in the PM wash-off ability between inner and outer crown-positioned leaves relative to rainfall events due to leaf macro- and micro-structure and geometric properties among tree species. Our results showed that PM wash-off effects on leaf surfaces were negatively associated with trichome density and size of leaf micro-scale during rainfall events. Specifically, Quercus acutissima with dense trichomes and micro-level surface roughness with narrow grooves on leaf surfaces showed lower total PM wash-off in both inner (−38%) and outer (105%) crowns during rainfall. Thus, their rough leaves in the inner crown might newly capture and/or retain more PM than smooth leaves even under rainfall conditions. More importantly, Euonymus japonicus, with a thin film-like wax coverage without trichome, led to higher total PM wash-off in both inner (368%) and outer (629%) crowns during rainfall. Furthermore, we studied the changes in PM wash-off during rainfall events by comparing particle size fractions, revealing a very significant association with macro-scale, micro-scale, and geometric features.

Forages and Pastures Symposium: revisiting mechanisms, methods, and models for altering forage cell wall utilization for ruminants.

Several ruminant animals rely almost exclusively on the complex polysaccharide matrix from the plant cell wall (CW) as their primary energy source via volatile fatty acids produced through ruminal and some hindgut fermentation processes. The CW contains different types and proportions of polysaccharides, proteins, phenolic compounds, and minerals in their macromolecular structure that influence the rate and extent of fiber digestion and selective retention of particulate matter due to its physical characteristics (buoyancy and comminuting) in the reticulorumen. The biosynthetic formation of the CW dictates possible manipulation mechanisms (targeted plant and microbes selection) and processing methods (physical, chemical, microbial, and enzymatic treatments and the use of genetically engineered bacteria) to increase its digestibility, leading to better utilization of the CW by the ruminant animal and hopefully lower the contribution of ruminants' greenhouse gas emissions. Early studies on lignin biosynthesis have led to more advanced studies focusing on replacing traditional monolignols with homopolymers that are easier to deconstruct or degrade. Concurrently, laboratory methods must be developed, evaluated, and modified to accurately reflect the digestibility and nutritive value of CW brought about by modern manipulation mechanisms or processing methods. However, the laboratory methods must also be reliable, precise, feasible, trivial, easy to implement, and cost-effective, but at the same time environmentally friendly and aware. For instance, although the acid detergent lignin has been demonstrated to behave uniformly as a nutritional entity, its chemical determination and association with carbohydrates still lack consensus. Spectroscopy (near-infrared and Raman) and in vitro gas production techniques have been adopted to assess plant chemical composition and nutritive value, but an incomplete understanding of the impacts caused by disrupting the CW for sample processing still exists. Different variations of multicompartmental and time- and age-dependent mathematical models have been proposed to determine the ruminal rates of degradation and passage of fiber. However, low-quality and incomplete data due to inconsistent marker results used to determine passage rates and transit time of fiber in the gastrointestinal tract have hindered advancements and adoptions of the next generation of computer models to understand ruminal fiber degradation.

Surface microcosmic structure and dust retention amounts of five evergreen species

With the acceleration of urbanization, air pollution is getting worse especially during winter, which causes serious threat to people’s health. Large numbers of studies showed that green plants had a significant species on the retention of particulate matters. In view of this, this study selected five evergreen plants to explore the dust retention amounts of PM10, PM2.5, PM1 per unit leaf area and the microstructure of leaf surface. The results showed that: 1. Within the unit leaf area: the dust retention amount (PM10, PM2.5, PM1) of Yucca gloriosa was the highest, followed by Buxus sinica, and that of Ligustrum lucidum, Buxus megistophylla and Phyllostachys propinqua was relatively few. 2. The roughness of the leaf surface, the waxy layer, the stomata protruded, the number of stomata, stomata density, and stomatal opening and closing degree would affect the retention of particulate matter. The results obtained scientific guidance for plants collection in landscape greening with brilliant dust retention ability, and maximized the ecological effect of greening plants to mitigate air pollution.

Particulate Matter and Trace Metal Retention Capacities of Six Tree Species: Implications for Improving Urban Air Quality

As effective filters for natural particulate matter (PM), plants play an important role in the reduction of PM, thus improving air quality. However, research on the relationship between leaf functional traits and PM retention capacity in different polluted environments remains limited. In this study, six tree species (Abies holophylla, Pinus tabuliformis, Juniperus chinensis, Populus berolinensis, Salix babylonica, Robinia pseudoacacia) in Shenyang city, China were selected as research objects to analyze their PM retention capacity in three different polluted environments (i.e., a busy road, an industrial area of the urban center, and a green space). Additionally, we determined the composition of trace elements associated with the different polluted environments; we also evaluated the impact of different polluted environments on leaf surface traits. The results showed that the actual amounts of PM and trace elements that accumulated on leaf surfaces differed considerably between pollution sites and plant species. The greatest accumulation of PM10 and PM2.5 deposited on the leaves of tested plants was at a traffic-related pollution site and the smallest accumulation was at a park site. There were significant differences in the PM10 and PM2.5 retention capacities of leaves among the different tree species (p &lt; 0.05), in the following order: Abies holophylla &gt; Pinus tabuliformis &gt; Juniperus chinensis &gt; Populus berolinensis &gt; Salix babylonica &gt; Robinia pseudoacacia. The average PM10 and PM2.5 accumulation amounts of Abies holophylla were 1.28–8.74 times higher than these of the other plants (p &lt; 0.05). Trace element analysis showed that the elemental composition of PM accumulated on leaf surfaces was location-dependent. In conclusion, a highly polluted environment can increase the average groove width, stomatal density, and roughness compared to a low-polluted environment. In contrast, the average value of contact angle is higher at low-pollution sites than at other sites. These results suggest that Abies holophylla is the most suitable greening tree species and that its widespread use could significantly reduce PM pollution in urban environments.

Comprehensive Evaluation of Dust Retention and Metal Accumulation by the Leaves of Roadside Plants in Hangzhou among Seasons

The auto exhaust and dust derived from increased traffic volumes have led to an increasing level of atmospheric particulates in urban areas, which have become a primary pollutant of ambient air in urban zones. Roadside plants can effectively retain atmospheric particulates and clean the urban air via foliar capture of road dust. Five common roadside plants in Hangzhou were selected to evaluate their capacity for the retention of particulate matter (PM) and the accumulation of metals. The results showed that the PM retention capacity of the different plants varied greatly, as was the case with Loropetalum chinense var. rubrum Yieh, Osmanthus fragrans (Thunb.) Loureiro, Pittosporum tobira (Thunb.) Ait, Photinia × fraseri Dress and Cinnamomum camphora (L.) Presl. In addition, the amounts of particles retained by the plants varied among seasons, with the highest retention in winter (12.19 g·m−2) and the lowest retention in spring (6.89 g·m−2). The solids on the leaf surface were mainly irregular particles, such as mineral fragments, soot aggregates, and fly ash particles. Meanwhile, these plant species can effectively accumulate heavy metals that attached to the particles. The leaves of the five tree species had the highest amounts of copper (Cu) and the lowest amounts of cadmium (Cd). Among species, L. chinense and P. tobira had the strongest comprehensive capacity to adsorb particulate matter and heavy metals. The results shed light on the rational selection of road plants, both as ornaments and to purify air via dust suppression in subtropical zones.

Influence of leaf morphological characteristics on the dynamic changes of particulate matter retention and grain size distributions

ABSTRACT Plant leaves can retain atmospheric particulate matter (PM) and thus alleviate air pollution. Herein, four plant species (Cerasus. serrulata, H. syriacus, H. tuberosus, and E. japonicus) from the central part of Shanxi Province, China, were investigated to analyse the dynamic changes in their PM retention capacity and grain size over five periods. The relationship between leaf morphological characteristics (leaf size and leaf surface microstructure) and dynamic changes were discussed in PM retention, revealing the influence of leaf morphological characteristics on the amount of PM retention and its composition. The results showed that amount and grain sizes of the retained PM differed significantly among the various studied species; however, the trends in PM retention of different species in the time series were the same. The grain size distributions of PM from the four species displayed a bimodal distribution, in which the main peak distribution range was 5–60 μm and the secondary peak distribution range was 0.4–1 μm. Leaves of smaller sizes and those with rough surfaces had a high PM retention capacity. Leaves with deep grooves are conductive to retaining PM2.5 and PM2.5-10, while leaves with hair are conductive to retaining PM>10. Therefore, the morphological characteristics of leaves should be considered when selecting the use of plant species to alleviate air pollution. Highlights Dynamics of PM retention capacity and grain size distributions of four plant species were analysed. Grain size distributions of PM retained on leaves had a bimodal distribution. Small leaves with grooves or hair are conductive to PM retention. Grooves are conductive to fine PM retention while hairs are conductive to coarse PM retention.

Effects of periodic drought with severe exhaust exposure on particle retention capacity and physiological responses of Photinia × fraseri Dress

Urban plants are regarded as an effective agent to control particulate matter (PM) pollution by absorbing PM. Repeated PM and drought stress in urban areas often cause morphological and physiological damage to plants, resulting in lower ecological benefits. Nevertheless, knowledge in PM retention capability, morphology and physiology of plants under repeated stress and cross stress has been barely available. In order to investigate changes in these aspects under repeated stress, we applied periodic drought with severe exhaust exposure on Photinia × fraseri Dress (a common urban tree species with strong PM retention ability). The study was carried out in a six-period scenario, with a duration of 10 days for each period: initial value (R0), initial stress period (S1), initial recovery period (R1) second stress period (S2), second recovery period (R2) and final stress period (S3). The results are as follows: In terms of periodic factor, PM retention of tail gas stress group (P) and cross stress group (PD) in S2 decreased by 10.00 μg/cm2 and 12.60 μg/cm2 respectively compared with those during S1 (p > 0.05). During S3, the total amount of PM on leaf surface in both P and PD demonstrated a significant decrease (p < 0.05). The retention capacity of P. fraseri may be dramatically limited under multi-period stress. In this experiment, we attribute the decrease of PM retention to the morphological changes (shedding of mature leaves, smaller leaf area and thinner wax layer) and physiological responses (an increase in gas exchange) under multi-period stress. In terms of cross-stress factor, the total retained PM on leaf surface in PD was higher than that in P, especially during S3, and the interaction between drought and PM reached a significant level (p < 0.01, η2 = 0.808), which indicated that drought reduced the loss of dust under PM stress. Changes in morphology and gas exchange indicated that the mechanisms for the high dust retention rate on the leaf surface of PD group varied in the three stress periods. In addition, except the chlorophyll relative value, the alleviated accumulation of MDA and intense production of soluble sugar with PD showed favorable responses to disturbance compared with those in P under the repeated stress. Therefore, we infer that, under multi-period stress of drought and tail gas, P. fraseri may better maintain PM retention ability and resistance than under single stress.

Foliar dust particle retention and metal accumulation of five garden tree species in Hangzhou: Seasonal changes

As particulate matter and heavy metals in the atmosphere affect the atmospheric quality, they pose a threat to human health through the respiratory system. Vegetation can remove airborne particles and purify the atmosphere. Plant leaves are capable of effectively absorbing heavy metals contained by particulates. To evaluate the effects of different garden plants on the particulate matter retention and heavy metal accumulation, the seasonal changes of dust retention of five typical garden plants were compared in the industrial and non-industrial zones in Hangzhou. Results revealed that these species differed in dust retention with the descending order of Loropetalum chinense > Osmanthus fragrans > Pittosporum tobira > Photinia × fraseri > Cinnamomum camphora, which were related to the microstructure feature of the leaf. These species also showed seasonal variation in dust retention, with the highest in summer, followed by winter, autumn, and spring, respectively. The total suspended particle per unit leaf area was higher in the industrial site (80.54 g m−2) than in the non-industrial site (19.77 g m−2). Leaf particles in different size fractions differed among species, while coarse particles (d > ten μm) predominated in most cases. The L. chinense and C. camphora plants accumulated the greatest Pb and Ni compared to other plants. Overall, L. chinense was the best suitable plant species to improve the air quality.