Surface Functionalization Of Particles Research Articles

Nanoparticle-assisted tubulin assembly is environment dependent

Nanomaterials acquire a biomolecular corona upon introduction to biological media, leading to biological transformations such as changes in protein function, unmasking of epitopes, and protein fibrilization. Ex vivo studies to investigate the effect of nanoparticles on protein-protein interactions are typically performed in buffer and are rarely measured quantitatively in live cells. Here, we measure the differential effect of silica nanoparticles on protein association in vitro vs. in mammalian cells. BtubA and BtubB are a pair of bacterial tubulin proteins identified in Prosthecobacter strains that self-assemble like eukaryotic tubulin, first into dimers and then into microtubules in vitro or in vivo. Förster resonance energy transfer labeling of each of the Btub monomers with a donor (mEGFP) and acceptor (mRuby3) fluorescent protein provides a quantitative tool to measure their binding interactions in the presence of unfunctionalized silica nanoparticles in buffer and in cells using fluorescence spectroscopy and microscopy. We show that silica nanoparticles enhance BtubAB dimerization in buffer due to protein corona formation. However, these nanoparticles have little effect on bacterial tubulin self-assembly in the complex mammalian cellular environment. Thus, the effect of nanomaterials on protein-protein interactions may not be readily translated from the test tube to the cell in the absence of particle surface functionalization that can enable targeted protein-nanoparticle interactions to withstand competitive binding in the nanoparticle corona from other biomolecules.

Surface functionalization of virus-like particles via bioorthogonal click reactions for enhanced cell-specific targeting

Surface functionalization of nano drug carriers allows for precise delivery of therapeutic molecules to the target site. This technique involves attaching targeting molecules to the nanoparticle surface, facilitating selective interaction. In this study, we engineered virus-like particles (VLPs) to enhance their targeting capabilities. Azide groups incorporated on the lipid membranes of VLPs enabled bioorthogonal click reactions for conjugation with cycloalkyne-bearing molecules, providing efficient conjugation with high specificity. HIV-1 Gag VLPs were chosen due to their envelope, which allows host membrane component incorporation, and the Gag protein, which serves as a recognition motif for human T cells. This combination, along with antibody-mediated targeting, addresses the limitations of intracellular delivery to T cells, which typically exhibit low uptake of exogenous materials. The selective uptake of azide VLPs by CD3-positive T cells was evaluated in a co-culture system. Even without antibody conjugation, VLP uptake was enhanced in T cells, indicating their intrinsic targeting potential. Antibody conjugation further amplified this effect, demonstrating the synergistic benefits of the combined targeting approach. Our study shows that recombinant production of azide functionalized VLPs results in engineered nanoparticles that can be easily modified using bioorthogonal click reactions, providing high specificity and versatility for conjugation with various molecules, making it applicable to a wide range of biological products.

Synthesis and functionalization of carbon nanospheres from asphaltene fraction for crude oil upgrading and viscosity reduction

Nanoparticles provide a promising, cost-effective eco-friendly solution to the challenges posed by heavy-oil reservoirs, significantly enhancing oil recovery rates by reducing viscosity without requiring extensive thermal inputs. In this study, carbon nanospheres (CNSs) and functionalized-CNSs nanofluids were prepared by incorporating surfactants (T80 or BMIMCl). These nanofluids were evaluated for their efficacy in upgrading crude oil, particularly focusing on viscosity-reduction. Rheological tests were conducted across varying shear rates (60–300 s−1) and concentrations (0.02–3 wt.%) to comprehensively assess the impact of these additives on the crude oil’s proprieties. The results showed a notable enhancement in crude oil viscosity reduction, with the following order observed: CNS-TiO2 < CNS-TiO2/DMIMCl < CNS-TiO2/T80, yielding reduction rates of 95%, 95.83%, and 97.08%, respectively, at an optimal dosage of 2.75 wt.% and a shear rate of 300 s−1. The surface functionalization of CNS particles and their crystallinity are the main mechanisms driving the reduction in oil viscosity. Moreover, the properties of the crude oil were investigated upon the utilization of CNS-TiO2/T80 nanofluid. It was found that this nanofluid led to a substantial reduction in sulfur content by 78.32% and a significant decrease in the percentage of heavier molecules, ranging from C12 to C35 and up to C36, with 47.76% and 97.98%, respectively.

Nano-Drug Delivery Systems in Oral Cancer Therapy: Recent Developments and Prospective.

Oral cancer (OC), characterized by malignant tumors in the mouth, is one of the most prevalent malignancies worldwide. Chemotherapy is a commonly used treatment for OC; however, it often leads to severe side effects on human bodies. In recent years, nanotechnology has emerged as a promising solution for managing OC using nanomaterials and nanoparticles (NPs). Nano-drug delivery systems (nano-DDSs) that employ various NPs as nanocarriers have been extensively developed to enhance current OC therapies by achieving controlled drug release and targeted drug delivery. Through searching and analyzing relevant research literature, it was found that certain nano-DDSs can improve the therapeutic effect of drugs by enhancing drug accumulation in tumor tissues. Furthermore, they can achieve targeted delivery and controlled release of drugs through adjustments in particle size, surface functionalization, and drug encapsulation technology of nano-DDSs. The application of nano-DDSs provides a new tool and strategy for OC therapy, offering personalized treatment options for OC patients by enhancing drug delivery, reducing toxic side effects, and improving therapeutic outcomes. However, the use of nano-DDSs in OC therapy still faces challenges such as toxicity, precise targeting, biodegradability, and satisfying drug-release kinetics. Overall, this review evaluates the potential and limitations of different nano-DDSs in OC therapy, focusing on their components, mechanisms of action, and laboratory therapeutic effects, aiming to provide insights into understanding, designing, and developing more effective and safer nano-DDSs. Future studies should focus on addressing these issues to further advance the application and development of nano-DDSs in OC therapy.

Roll‐to‐Roll Fabrication of Bijels via Solvent Transfer Induced Phase Separation (R2R‐STrIPS)

AbstractBicontinuous interfacially jammed emulsion gels (bijels) are soft materials with applications in separation science, energy storage, catalysis, and tissue engineering. Bijels are formed by arresting the liquid–liquid phase separation of two immiscible liquids via interfacial jamming of colloidal particles. Current fabrication methods of bijels employ either batch processing or continuous‐flow microfluidic synthesis. Production methods with higher throughput are needed to facilitate large‐scale synthesis of bijels. Herein, it is shown that roll‐to‐roll processing (R2R) enables the fabrication of bijel films with controlled dimensions at rates of several cm3 per minute. Increasing the bijel production rate via R2R requires an understanding of the interaction of the bijel with the R2R substrate. The study demonstrates that controlling the wetting on the R2R substrate enables the synthesis of uniform bijel films with adjustable thickness. Moreover, this research shows that the bijel film microstructure depends on the mechanism of phase separation and particle surface functionalization. The resulting knowledge gains can help to leverage bijel synthesis from laboratory to industrial scales in the future, promoting the exciting application potentials of bijels.

Precise surface functionalization of PLGA particles for human T cell modulation.

The biofunctionalization of synthetic materials has extensive utility for biomedical applications, but approaches to bioconjugation typically show insufficient efficiency and controllability. We recently developed an approach by building synthetic DNA scaffolds on biomaterial surfaces that enables the precise control of cargo density and ratio, thus improving the assembly and organization of functional cargos. We used this approach to show that the modulation and phenotypic adaptation of immune cells can be regulated using our precisely functionalized biomaterials. Here, we describe the three key procedures, including the fabrication of polymeric particles engrafted with short DNA scaffolds, the attachment of functional cargos with complementary DNA strands, and the surface assembly control and quantification. We also explain the critical checkpoints needed to ensure the overall quality and expected characteristics of the biological product. We provide additional experimental design considerations for modifying the approach by varying the material composition, size or cargo types. As an example, we cover the use of the protocol for human primary T cell activation and for the identification of parameters that affect ex vivo T cell manufacturing. The protocol requires users with diverse expertise ranging from synthetic materials to bioconjugation chemistry to immunology. The fabrication procedures and validation assays to design high-fidelity DNA-scaffolded biomaterials typically require 8 d.

A "Green" Stirring Plasma Functionalization Strategy for Controllable Oxygen-Containing Functional Groups on Octa-Methyl POSS Microstructure.

The distinctive cage-like structure of polyhedral oligomeric silsesquioxane (POSS) materials makes them highly effective fillers in composite membranes for separation applications. However, realizing their full potential in the application often requires specific surface functionalization with various groups. However, this requirement remains challenging owing to the limitations of wet-chemistry approaches, which frequently result in the generation of hazardous chemical by-products. In this paper, a "green" stirring plasma strategy is presented for the functionalization of octa-methyl POSS sub-micron particles into designable oxygen-containing functional groups using a low-pressure oxygen plasma from combined continuous wave and pulsed (CW+P) modes. Plasma from oxygen gas with CW mode offers highly oxygen-reactive species to continuously etch and activate the surface of the POSS. The resulting pulsed plasma assists in grafting more reactive oxygen species onto the active methyl groups of the POSS to form specific oxygen-containing functional groups including hydroxyl and carboxyl. A precise control of nearly one hydroxyl or one carboxyl group at the corner of the cage structure of the POSS is demonstrated, without damaging the core. Therefore, the plasma process discussed in this work is suggested by the authors as controllable fundamental research for the surface functionalization of sub-micron particles, promoting a more environmentally friendly pathway for the preparation of designable fillers.

Adsorption behavior of triclosan on polystyrene nanoplastics: The roles of particle size, surface functionalization, and environmental factors

Nanoplastics (NPs) contribute substantially to the transport of waterborne pollutants. Triclosan (TCS) has a high potential to contact with NPs because of their prevalence in natural waters. Herein, this study investigated the adsorption behavior of TCS on differently sized and functionalized polystyrene (PS) NPs. The effects of environmental factors such as pH, salinity, and dissolved organic matter (DOM) were also evaluated. Results suggest that the adsorption equilibrium constant (kd) of TCS in pristine PSNP suspensions followed the order as: PSNPs-50 nm (4.39 L·g−1) > PSNPs-100 nm (2.78 L·g−1) > PSNPs-200 nm (2.59 L·g−1) > PSNPs-500 nm (1.36 L·g−1) ≈ PSNPs-900 nm (1.36 L·g−1). For the functionalized PSNPs (i.e., PSNPs-COOH, PSNPs-NH2), the values of specific surface area normalized kd called kd, SSA were higher than those of pristine PSNPs. Meanwhile, TCS adsorption on two functionalized PSNPs remained stable and then decreased as salinity increased, while an opposite trend was observed toward pristine PSNPs. All these suggested that physicochemical properties of PSNPs (e.g., particle size and surface functional groups) are important factors influencing their adsorption capacity. When the solution pH raised, the adsorbed amounts of TCS on all tested PSNPs prone to decline. However, DOM only affected the adsorption behavior of PSNPs-50 nm, probably owing to its aggregation with tiny PSNPs and the induced secondary adsorption.

Substrate Stiffness and Particle Properties Influence Cellular Uptake of Nanoparticles and Viruses from the Ventral Side

AbstractIt is a long‐standing challenge to exploit cellular uptake mechanisms to deliver desired cargo into cells, for example, specific drugs or gene editing techniques. This study introduces a bioinspired material approach where nanoparticles are presented at the ventral side of cells adhering to engineered extracellular matrices. The effect of matrix stiffness on cell adhesion and mechanics, as well as on particle internalization by clathrin‐mediated endocytosis (CME), is investigated for varying particle size and surface functionalization. The results presented here show that substrate stiffness affects both cell adhesion and particle internalization, with softer substrates promoting higher levels of particle uptake. However, the activation of the CME pathway, either mechanically by particle size or functionally by receptor binding, regulates the sensitivity of cellular particle uptake to matrix stiffness. Finally, adeno‐associated viruses as the leading platform for therapeutic gene delivery are used as model cargo to showcase the importance of considering multiple components when designing delivery systems. These findings indicate that particle uptake is a multifaceted process that can be improved by the appropriate combination of extracellular environment mechanics and cargo properties.

The co-presence of polystyrene nanoplastics and ofloxacin demonstrates combined effects on the structure, assembly, and metabolic activities of marine microbial community

Nanoplastic is increasing in environments and can address toxic effects on various organisms. Particle size, concentration, and surface functionalization most influence nanoplastic toxicity. Besides, nanoplastic can adsorb other contaminants (e.g., antibiotics) to aggravate its adverse effects. The combined effects of nanoplastics and antibiotics on planktonic/benthic microbial communities, however, are still largely unknown. In this study, the combined effects of polystyrene nanoplastic and ofloxacin on the structure, assembly, and metabolic activities of marine microbial communities were investigated based on amplicon sequencing data. The results mainly demonstrate that: (1) nanoplastic and ofloxacin have greater impacts on prokaryotic communities than eukaryotic ones; (2) niche breadths of planktonic prokaryotes and benthic eukaryotes were shrank with both high nanoplastic and ofloxacin concentrations; (3) increased ofloxacin mainly reduces nodes/edges of co-occurrence networks, while nanoplastic centralizes network modularity; (4) increased nanoplastic under high ofloxacin concentration induces more differential prokaryotic pathways in planktonic communities, while benthic communities are less influenced. The present work indicates that co-presence of nanoplastics and ofloxacin has synergistic combined effects on community structure shifts, niche breadth shrinking, network simplifying, and differential prokaryotic pathways inducing in marine microbial communities, suggesting nanoplastics and its combined impacts with other pollutions should be paid with more concerns.

Magnetic heating of water dispersible and size-controlled superparamagnetic cobalt iron oxide nanoparticles

Magnetic nanoparticles have been of great interest for various biomedical applications due to their controllability in the distance. Monodisperse superparamagnetic CoFe2O4 (CFO) nanoparticles were synthesized by solvothermal method with oleic acid. The oleic acid ligands are exchanged with citric acid to obtain water-dispersible citric acid-coated CA (CFO–CA) nanoparticles. The M–H curve recorded at room temperature shows the superparamagnetic nature of CFO nanoparticles for both oleic- and citric-coated samples. The magnetic heating performance of CFO–CA shows an exciting dependence on the particle size and surface functionality. The hyperthermia efficiency of CFO–CA nanoparticles increases with increasing magnetic field strength and nanoparticle concentration. A specific absorption ratio value of 152.7 W/g obtained in this study is comparable to other investigations, demonstrating a great potential of CFO–CA nanoparticles for hyperthermia-based treatments. This controlled synthesis process can be applied to various functional biomedical nanoparticles to prepare nanoparticles with designed surface moieties for further potential applications.

The effects of size and surface functionalization of polystyrene nanoplastics on stratum corneum model membranes: An experimental and computational study

Nanoplastics are mainly generated from the decomposition of plastic waste and artificial production and have attracted much attention due to their wide distribution in the environment and the potential risk for humans. As the largest organ of the human body, the skin is inevitably in contact with nanoplastics. Stratum corneum is the first barrier when the skin is exposed to nanoplastics. However, little is known about the interactions between nanoplastics and stratum corneum. Here, the effects of particle size and surface functionalization (amino-modified and carboxy-modified) of polystyrene nanoplastics on the stratum corneum models were studied by Langmuir monolayer and molecular dynamics simulations. An equimolar mixture of ceramide/cholesterol/free fatty acid was used to mimic stratum corneum intercellular lipids. The Langmuir monolayer studies demonstrated that the larger size and surface functionalization of polystyrene nanoplastics significantly reduced the stability of stratum corneum lipid monolayer in a concentration-dependent fashion. Simulation results elucidated that functionalized polystyrene oligomers had a stronger interaction with lipid components of the stratum corneum model membrane. The cell experiments also indicated that functionalized polystyrene nanoplastics, especially for amino-modified polystyrene nanoplastics, had significant cytotoxicity on normal human dermal fibroblast cells. Our results provide fundamental information and the basis for a deeper understanding of the health risks of nanoplastics to humans.

The Collaboration Among the Ibáñez--Brutchey--Arbiol Groups.

This invited Team Profile was created by the Ibáñez group, Institute of Science and Technology Austria. They recently published an article together with the Brutchey group from USA, and Arbiol group from Spain. The work presents the strategy of functionalizing surfactant-free particles by using inorganic molecules to control the microstructure during the sintering process. In particular, bismuth thiolates were used to functionalize surfactant-free SnTe particle surfaces. Upon thermal processing, decomposition of bismuth thiolates renders SnTe-Bi2 S3 nanocomposites with synergistic functions to enhance thermoelectric performance. "Surface Functionalization of Surfactant-Free Particles: A Strategy to Tailor the Properties of Nanocomposites for Enhanced Thermoelectric Performance", C. Chang, Y. Liu, S. H. Lee, M. C. Spadaro, K. M. Koskela, T. Kleinhanns, T. Costanzo, J. Arbiol, R. L. Brutchey, M. Ibáñez, Angew. Chem. Int. Ed. 2022, 61, e202207002; Angew. Chem. 2022, 134, e202207002.

Particle surface functionalization affects mechanism of endocytosis and adverse effects of silver nanoparticles in mammalian kidney cells.

Silver nanoparticles (AgNPs) show a plethora of possible applications due to their antimicrobial properties. Different coatings of AgNPs are used in order to increase stability, availability, and activity. However, the question about the toxicity after prolonged exposure still remains. Here, we show that different surface coatings affect in vitro toxicity and internalization of AgNPs in porcine kidney (PK15) cells. AgNPs coated with cetyltrimethylammonium bromide (CTAB), poly(vinylpyrrolidone) (PVP), sodium bis(2-ethylhexyl)-sulfosuccinate (AOT), poly-L-lysine (PLL), and bovine serum albumin (BSA) were toxic at the concentration of 10mg Ag/L and higher. The toxicity increased in the following manner: PVP-AgNPs < CTAB-AgNPs < PLL-AgNPs < AOT-AgNPs < BSA-AgNPs. All types of AgNPs were internalized by the PK15 cells in a dose-dependent manner with greater internalization of AgNPs bearing positive surface charge. Transmission electron microscopy (TEM) experiments showed that AgNPs were located in the lysosomal compartments, while the co-treatment with known inhibitors of endocytosis pathways suggested macropinocytosis as the preferred internalization pathway. When inside the cell, all types of AgNPs induced the formation of reactive oxygen species while decreasing the concentration of the cell's endogenous antioxidant glutathione. The comet assay indicated possible genotoxicity of tested AgNPs starting at the concentration of 2mg Ag/L or higher, depending on the surface functionalization. This study demonstrates the toxicity of AgNPs pointing to the importance of biosafety evaluation when developing novel AgNPs-containing materials.

Electrospun Magnetic Composite Poly-3-hydroxybutyrate/Magnetite Scaffolds for Biomedical Applications: Composition, Structure, Magnetic Properties, and Biological Performance.

Magnetically responsive composite polymer scaffolds have good potential for a variety of biomedical applications. In this work, electrospun composite scaffolds made of polyhydroxybutyrate (PHB) and magnetite (Fe3O4) particles (MPs) were studied before and after degradation in either PBS or a lipase solution. MPs of different sizes with high saturation magnetization were synthesized by the coprecipitation method followed by coating with citric acid (CA). Nanosized MPs were prone to magnetite-maghemite phase transformation during scaffold fabrication, as revealed by Raman spectroscopy; however, for CA-functionalized nanoparticles, the main phase was found to be magnetite, with some traces of maghemite. Submicron MPs were resistant to the magnetite-maghemite phase transformation. MPs did not significantly affect the morphology and diameter of PHB fibers. The scaffolds containing CA-coated MPs lost 0.3 or 0.2% of mass in the lipase solution and PBS, respectively, whereas scaffolds doped with unmodified MPs showed no mass changes after 1 month of incubation in either medium. In all electrospun scaffolds, no alterations of the fiber morphology were observed. Possible mechanisms of the crystalline-lamellar-structure changes in hybrid PHB/Fe3O4 scaffolds during hydrolytic and enzymatic degradation are proposed. It was revealed that particle size and particle surface functionalization affect the mechanical properties of the hybrid scaffolds. The addition of unmodified MPs increased scaffolds' ultimate strength but reduced elongation at break after the biodegradation, whereas simultaneous increases in both parameters were observed for composite scaffolds doped with CA-coated MPs. The highest saturation magnetization─higher than that published in the literature─was registered for composite PHB scaffolds doped with submicron MPs. All PHB scaffolds proved to be biocompatible, and the ones doped with nanosized MPs yielded faster proliferation of rat mesenchymal stem cells. In addition, all electrospun scaffolds were able to support angiogenesis in vivo at 30 days after implantation in Wistar rats.

Effects of polystyrene micro/nanoplastics on liver cells based on particle size, surface functionalization, concentration and exposure period.

Micro/nanoplastics (MP/NP) contaminate our food and drinking water but their impact on human health has not been well-documented. The liver is one of the first organs that ingested MP/NP encounter and it has a major role in the clearance of xenobiotics. Therefore, the effects of polystyrene MP/NP on liver HepG2 cells were studied. Cellular responses to particles of various sizes (50-5000 nm) and surface functionalization (aminated, carboxylated or non-functionalized) were determined at different concentrations (0.1-100 μg/mL) and exposure periods (1-24 h). Smaller sized particles were internalized by HepG2 cells more avidly than larger particles regardless of functionalization; the highest uptake being for 50 and 100 nm aminated particles at lower concentrations. Confocal microscopy images of cells corroborated quantitative uptake results. Aminated particles were more toxic to the cells than carboxylated or non-functionalized particles. Among aminated particles smaller particles (50 and 100 nm) were more detrimental to cell viability compared to larger particles (1000 or 5000 nm) with toxicity increasing with concentration. Treatment with the particles for 4 h increased intracellular concentrations of Caspase-3 by 1.5-2.8 fold, but 24 h exposure to the particles attenuated this increase in Caspase-3 concentrations. A slight trend of higher Caspase-3 concentration in cells treated with larger particles (500-5000 nm) compared to smaller particles (50-200 nm) was observed, indicating that larger particles are more likely to direct cells toward apoptotic cell death upon 4 h exposure. Exposure of cells to large PS particles (500-5000 nm) upregulated interleukin-8 and the effect was enhanced at 24 h. Overall, the study demonstrated that smaller aminated particles were most toxic to hepatocytes, but larger particles induced apoptotic cell death or an inflammatory response depending on the length of exposure.

A Magnetosome-Based Platform for Flow Biocatalysis.

Biocatalysis in flow reactor systems is of increasing importance for the transformation of the chemical industry. However, the necessary immobilization of biocatalysts remains a challenge. We here demonstrate that biogenic magnetic nanoparticles, so-called magnetosomes, represent an attractive alternative for the development of nanoscale particle formulations to enable high and stable conversion rates in biocatalytic flow processes. In addition to their intriguing material characteristics, such as high crystallinity, stable magnetic moments, and narrow particle size distribution, magnetosomes offer the unbeatable advantage over chemically synthesized nanoparticles that foreign protein “cargo” can be immobilized on the enveloping membrane via genetic engineering and thus, stably presented on the particle surface. To exploit these advantages, we develop a modular connector system in which abundant magnetosome membrane anchors are genetically fused with SpyCatcher coupling groups, allowing efficient covalent coupling with complementary SpyTag-functionalized proteins. The versatility of this approach is demonstrated by immobilizing a dimeric phenolic acid decarboxylase to SpyCatcher magnetosomes. The functionalized magnetosomes outperform similarly functionalized commercial particles by exhibiting stable substrate conversion during a 60 h period, with an average space–time yield of 49.2 mmol L–1 h–1. Overall, our results demonstrate that SpyCatcher magnetosomes significantly expand the genetic toolbox for particle surface functionalization and increase their application potential as nano-biocatalysts.

Recent Advances in Mesoporous Silica Nanoparticles for Targeted Drug Delivery Applications.

Nanotechnology provides the means to design and fabricate delivery vehicles capable of overcoming physiologically imposed obstacles and undesirable side effects of systemic drug delivery. This protocol allows maximal targeting effectiveness and therefore enhances therapeutic efficiency. In recent years, Mesoporous Silica Nanoparticles (MSNPs) have sparked interest in nanomedicine research community, particularly for their promising applications in cancer treatment. The intrinsic physio-chemical stability, facile functionalization, high surface area, low toxicity, and great loading capacity for a wide range of chemotherapeutic agents make MSNPs very appealing candidates for controllable drug delivery systems. Importantly, the peculiar nanostructures of MSNPs enabled them to serve as an effective drug, gene, protein and antigen delivery vehicle for a variety of therapeutic regimens. For these reasons, in this review article, we underscore the recent progress in the design and synthesis of MSNPs along with the parameters influencing their characteristic features and activities. In addition, the process of absorption, dissemination and secretion by injection or oral management of MSNPs are also discussed, as they are key directions for potential utilization of MSNPs. Factors influencing the in vivo fate of MSNPs will also be highlighted, with a main focus on particle size, morphology, porosity, surface functionality and oxidation. Given that combining other functional materials with MSNPs may increase their biological compatibility, monitor drug discharge, or improve absorption by tumor cells coated MSNPs; these aspects are also covered and discussed herein.

Surface Functionalization of Polymer Particles for Cell Targeting by Modifying Emulsifier Chemistry.

The oil in water emulsion/solvent extraction method is used to fabricate many FDA approved, polymer particle formulations for drug delivery. However, these formulations do not benefit from surface functionalization that can be achieved through tuning particle surface chemistry. Poly(vinyl alcohol) (PVA) is the emulsifier used for many FDA approved formulations and remains associated with the particle surface after fabrication. We hypothesized that the hydroxyl groups in PVA could be conjugated with biomolecules using isothiocyanate chemistry and that these modifications would endow the particle surface with additional functionality. We demonstrate that fluorescein isothiocyanate and an isothiocyanate derivatized mannose molecule can be covalently attached to PVA in a one-step reaction. The modified PVA polymers perform as well as unmodified PVA in acting as an emulsifier for fabrication of poly(lactide-co-glycolide) particles. Particles made with the fluorescein modified PVA exhibit fluorescence confined to the particle surface, while particles made with mannose modified PVA bind concanavalin A. In addition, mannose modified PVA increases particle association with primary macrophages by three-fold. Taken together, we present a facile method for modifying the surface reactivity of polymer particles widely used for drug delivery in basic research and clinical practice. Given that methods are established for conjugating the isothiocyanate functional group to a wide range of biomolecules, our approach may enable PVA based biomaterials to engage a multitude of biological systems.

Gluten-starch interface characteristics and wheat dough rheology-Insights from hybrid artificial systems.

Referring to the total surface existing in wheat dough, gluten-starch interfaces are a major component. However, their impact on dough rheology is largely unclear. Common viewpoints, based on starch surface modifications or reconstitution experiments, failed to show unambiguous relations of interface characteristics and dough rheology. Observing hybrid artificial dough systems with defined particle surface functionalization gives a new perspective. Since surface functionalization standardizes particle-polymer interfaces, the impact on rheology becomes clearly transferable and thus, contributes to a better understanding of gluten-starch interfaces. Based on this perspective, the effect of particle/starch surface functionality is discussed in relation to the rheological properties of natural wheat dough and modified gluten-starch systems. A competitive relation of starch and gluten for intermolecular interactions with the network-forming polymer becomes apparent during network development by adsorption phenomena. This gluten-starch adhesiveness delays the beginning of non-linearity under large deformations, thus contributing to a high deformability of dough. Consequently, starch surface functionality affects the mechanical properties, starting from network formation and ending with the thermal fixation of structure.