Parametric Wavelength Conversion Research Articles

Topologically Protected Parametric Wavelength Conversion in a Valley Hall Insulator

AbstractNonlinear phenomena are investigated in a topological photonic valley Hall insulator (VHI) using a Kagome system designed to have localized topological boundary state (TBS) at telecommunications wavelengths. Valley Hall topologically protected nonlinear phenomena are demonstrated. Similar transmission properties and parametric wavelength conversion of up to −12 dB are experimentally achieved using sub‐milliwatt average powers in a zigzag interface without back‐scattering, compared with a straight interface. Furthermore, a 7 dB slow light enhancement is observed in the conversion efficiency near the red edge in the transmission band of the boundary state, demonstrating how slow light‐induced backscattering may be circumvented by leveraging the topologically protected boundary state. A Kerr‐induced delocalization of the valley Hall topological state (VHTS) is further experimentally observed, which can be harnessed to control the properties of topological edge states.

Impact of pump-phase noise in PPLN-based optical parametric amplifier and wavelength converter for digital coherent transmission

Wideband signal amplification and optical signal processing with a high gain using an optical parametric amplifier based on a periodically poled LiNbO3 (PPLN) waveguide is attractive for constructing wideband optical fiber networks. We experimentally investigate the transfer characteristics of the phase noise of a pump laser in χ(2)-based optical parametric amplification and wavelength conversion on the basis of second-harmonic-generation and differential-frequency-generation processes. We also evaluate the effect of the transferred phase noise on signal quality in dispersion-unmanaged digital coherent fiber transmission systems. We show that the phase noise is transferred only to the wavelength-converted idler and does not affect the amplified signal even by using a pump laser with a MHz-order linewidth. We also show that the phase noise transferred to the idler light can have a similar impact on signal quality as equalization-enhanced phase noise (EEPN) in digital coherent transmission. The signal penalty including EEPN was evaluated with several pump lasers and at symbol rates of 32, 64, and 96 Gbaud. We also propose a method of using correlated pump lights between a wavelength converter pair to cancel out the transfer of phase noise.

Towards efficient broadband parametric conversion in ultra-long Si3N4 waveguides.

Broadband continuous-wave parametric gain and efficient wavelength conversion is an important functionality to bring on-chip. Recently, meter-long silicon nitride waveguides have been utilized to obtain continuous-traveling-wave parametric gain, establishing the great potential of photonic-integrated-circuit-based parametric amplifiers. However, the effect of spiral structure on the performance and achievable bandwidth of such devices have not yet been studied. In this work, we investigate the efficiency-bandwidth performance in up to 2 meter-long waveguides engineered for broadband operation. Moreover, we analyze the conversion efficiency fluctuations that have been observed in meter-long Si3N4 waveguides and study the use of temperature control to limit the fluctuations.

Parametric amplification based on intermodal four-wave mixing between different supermodes in coupled-core fibers.

Parametric amplifiers relying on the nonlinear four-wave mixing process are known for their signature symmetric gain spectrum, where signal and idler sidebands are generated on both sides of a powerful pump wave frequency. In this article we show analytically and numerically that parametric amplification in two identically coupled nonlinear waveguides can be designed in such a way that signals and idlers are naturally separated into two different supermodes, hence providing idler-free amplification for the supermode carrying signals. This phenomenon is based on the coupled-core fibers analogue of intermodal four wave-mixing occurring in a multimode fiber. The control parameter is the pump power asymmetry between the two waveguides, which leverages the frequency dependency of the coupling strength. Our findings pave the way for a novel class of parametric amplifiers and wavelength converters, based on coupled waveguides and dual-core fibers.

Hybrid Amplification Approach Towards Wideband Optical Communications

Optical amplification techniques using fiber nonlinearities have the potential to cover new bands beyond the C and L-bands. Among nonlinear amplifiers, the phase-sensitive amplifier has a noise figure that can ideally be 0 dB, and it can compensate for the additional noise resulting from the higher losses of new bands compared to C and L-bands in transmission fibers. In this paper, a hybrid amplifier that combines three nonlinear phenomena in highly nonlinear fibers, namely parametric wavelength conversion, Raman amplification, and phase-sensitive amplification, is proposed as a discrete amplifier to achieve sufficient gain in the new band while simultaneously minimizing amplified spontaneous emission (ASE). The combination of these phenomena helped to simplify the overall amplifier by eliminating the need for electrical phased lock loop and aligning the powers of the signal and idler and maximizing the pump power without signal/pump path separation. In addition, the fiber Bragg grating-based phase shifter reduced the total phase of the signals, idlers, and pump close to zero by temperature tuning. The prototype of the hybrid amplifier achieved >25 nm gain bandwidth, approximately 20 dB net gain, and the ASE level was suppressed. The proposed amplifier is suitable for applications in large-scale high-capacity networks, such as metro and long-haul networks.

A topological nonlinear parametric amplifier

Topological boundary states are well localized eigenstates at the boundary between two different bulk topologies. As long as bulk topology is preserved, the topological boundary mode will endure. Here, we report topological nonlinear parametric amplification of light in a dimerized coupled waveguide system based on the Su-Schrieffer-Heeger model with a domain wall. The good linear transmission properties of the topological waveguide arising from the strong localization of light to the topological boundary is demonstrated through successful high-speed transmission of 30 Gb/s non-return-to-zero and 56 Gb/s pulse amplitude 4-level data. The strong localization of a co-propagating pump and probe to the boundary waveguide is harnessed for efficient, low power optical parametric amplification and wavelength conversion. A nonlinear tuning mechanism is shown to induce chiral symmetry breaking in the topological waveguide, demonstrating a pathway in which Kerr nonlinearities may be applied to tune the topological boundary mode and control the transition to bulk states.

Parametric Amplification and Wavelength Conversion in Dual-Core Highly Nonlinear Fibers

In this paper we experimentally show parametric amplification and wavelength conversion in a custom manufactured dual-core highly nonlinear fiber. On-off gain <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$&gt;$</tex-math></inline-formula> 10 dB and conversion efficiencies between <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$-1$</tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$-8.5$</tex-math></inline-formula> dB were measured for both cores. The estimated effective nonlinear parameter for the cores of the fiber are 6.6 W <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$^{-1}\mathrm{km}^{-1}$</tex-math></inline-formula> and 6.3 W <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$^{-1}\mathrm{km}^{-1}$</tex-math></inline-formula> , while the zero-dispersion wavelength for the individual cores is shown to be relatively close from each other. Furthermore, complementary analytical and numerical results show that coupled cores fiber optical parametric amplifier offer the potential of wide-band gain even when they have significantly distinct zero-dispersion wavelengths.

Parametric wavelength conversion with bidirectional utilization of a multiple QPM device.

A configuration for wavelength conversion and optical amplification by parametric interaction using a nonlinear optical device is proposed. It enables pump generation through second harmonic generation (SHG), difference frequency generation (DFG), and optical parametric amplification (OPA) using a multiple-quasi-phase-matched (M-QPM) LiNbO3 waveguide in a bidirectional manner. Wavelength conversion for the 1.4-1.6 µm band is experimentally demonstrated. In addition, it is demonstrated that the parametric gain band can be changed using various detunings between the pump and QPM wavelengths used for the DFG/OPA process. The proposed method would be useful for enabling high-capacity optical transmission outside the 1550-nm band.

Noise Figure Study for a 3-Stage Hybrid Amplifier Using Parametric Wavelength Converters and EDFA

We explore the potential of a combination of two fiber parametric wavelength converters and an erbium-doped fiber amplifier to serve as a hybrid amplifier for S-band. We experimentally confirm the validity of a simple quantum model of the wavelength-converter noise figure (NF) and use it to extrapolate the measurement results and find the optimum hybrid amplifier settings. We find that the total NF can be below 6 dB, if the wavelength conversion efficiency of the first stage is above 4 dB. Furthermore, the total NF can be as low as 4 dB, if the conversion efficiency of the first stage is 10 dB or higher. Finally, we estimate the potential impact of pump relative noise on the NF.

Mid-infrared parametric wavelength conversion seeded with fiber optical parametric sources

A new method of seeding X2 optical parametric converters with X3 fiber optical parametric sources is introduced. We demonstrate a tunable mid-infrared source operating at around 3 µm with the technique and discuss the potential of this architecture.

Optical parametric gain in CMOS-compatible sub-100 μm photonic crystal waveguides

Emerging compositionally engineered complementary metal-oxide-semiconductor (CMOS)-compatible platforms have been employed for high efficiencies in various on-chip applications, including optical parametric amplification and wavelength conversion. Combining the novel nonlinear optics platforms such as ultra-silicon-rich nitride (USRN: Si7N3) with periodic waveguide structures can lead to further enhancement of material nonlinearities via the slow light effect and enable ultra-compact devices. Four-wave mixing in a USRN-based, CMOS-compatible, photonic crystal waveguide (PhCWg) leading to on/off optical parametric signal gain reaching 3 dB, and a large instantaneous idler conversion efficiency of −1 dB is explored experimentally. Enhancement of Kerr nonlinearity in the presence of a sizable and near-constant group index allows the findings on an ultra-compact, 97 μm-long PhCWg, equivalent to a large on/off gain per unit length of 333 dB/cm.

Mid-infrared wavelength conversion using dispersion-engineered As2S5 microstructured optical fiber pumped with an ultrafast laser at 2 µm.

We fabricate a dispersion-engineered As2S5 microstructured optical fiber for demonstration of frequency conversion in one of the atmospheric-transparent windows in the mid-infrared domain. The experimentally obtained results show that parametric wavelength conversion at 4.5µm is obtained using fabricated microstructured optical fiber pumped with 200fs laser pulses of average power of 20mW at 2µm. Obtained detuning frequency from the pump frequency was ∼84THz. To the best of our knowledge, the mid-infrared wavelength conversion at 4.5µm in fiber configuration has been demonstrated for the first time. The experimentally observed result matches well with numerically simulated phase-matching conditions.

A review of nonlinear applications in silicon optical fibers from telecom wavelengths into the mid-infrared spectral region

Glass-glad silicon core fibers are attracting considerable attention for use in nonlinear applications due to their tight light confinement and intrinsically high third-order nonlinearities. Recent advances in the fabrication procedures have shown that molten core fiber drawing and post-processing techniques can be combined in a versatile approach to produce low-loss fibers with submicron-sized crystalline cores. In this paper, we review current progress in the nonlinear application of silicon-based optical fibers from telecom wavelengths into the mid-infrared. Particular attention is paid to dispersion engineering the fibers to achieve efficient parametric amplification, wavelength conversion and mid-infrared supercontinuum generation.

Hybrid wavelength conversion with dynamic pump-wavelength selection for synchronous optical packet switching

Abstract In this paper, we propose and study the performance of two conversion schemes for optical packet switch (OPS) with the objective of reducing packet contention, and hence, improving the overall packet loss ratio (PLR). In both schemes, conversion is performed in two layers. The first layer contains a dedicated wavelength converter (WC) for each input wavelength, while the second conversion layer consists of a dynamic pump-wavelength selection (DPS) of parametric wavelength converters (PWCs) shared in a Feed-Back fashion. The first scheme uses non-circular WCs (NCWCs) with DPS of chained PWCs (called LDPSC, for short). In the LDPSC scheme, an incoming packet is accepted only if it could be assigned to its required output using only the NCWCs in the first layer or more than one PWCs in a chained fashion in the second layer; otherwise it will be dropped. The second scheme uses circular wavelength conversion (CWCs) with DPS of PWCs without chaining (named CDPS, for short). In the CDPS scheme, an incoming packet is accepted only if it can be assigned to its required output using only CWCs in the first layer or only one of the PWCs in the second layer; otherwise it will be dropped. For each of the two schemes, a matching algorithm along with a Dynamic pump conversion (DPC) algorithm is presented. The performances of the proposed schemes are compared to two conventional schemes; namely, the DPSC scheme that uses a shared pool of DPS of chained PWCs, and the LDPS scheme that uses a dedicated NCWC for each input wavelength and a shared pool of DPS of PWCs without chaining. Simulation results show that, the new CDPS scheme achieves the same performance (in terms of PLR) of the LDPS scheme, while reducing the required number of PWCs by more than 44 % and 57 % for conversion distances (that is the maximum number of wavelengths adjacent to any input wavelength on any one of its sides), d = 1 and 2; respectively. Moreover, using conversion distance d = 1 , the new LDPSC scheme reduces the PLR compared to the LDPS scheme by up to 85 % and 22 % for traffic loads, 0.5 and 1; respectively. In addition, for d = 1 , the new LDPSC scheme reduces the PLR compared to the DPSC scheme by up to 99.8 % and 30 % for traffic loads, 0.5 and 1; respectively.

Shift of zero-dispersion wavelength in bent optical fibers.

The understanding of how bending modifies the dispersion of optical fibers, in particular, the zero-dispersion wavelength (λ0), is essential in the development of compact nonlinear optical devices such as parametric amplifiers, wavelength converters, soliton lasers and frequency comb generators. Typically, substantial variations in the parametric gain and/or conversion efficiency are significant for changes in λ0 of ~0.1 nm, which occur for variations on the bending radius (Rb) of 1 cm or less. Measuring λ0 as a function of bending radius (Rb) is challenging, as it requires detecting changes < 0.1 nm and in short fibers. By using a method based on four-wave mixing (FWM) generated by an incoherent-pump with relatively broad spectrum and a weak laser, we report measurements of λ0 as a function of Rb in a dispersion-shifted fiber with <0.1 nm accuracy on λ0. This method is sensitive enough to measure small variations in λ0 of ~0.04 nm in very short fibers (~20 m). We observe that λ0 increases by 12 nm when Rb is decreased from 10 cm to 1 cm, and a change of 1 nm is obtained for Rb = 3 cm. We also present numerical simulations of the bent fiber that are in good agreement with our measurements, and help us to explain the observations and to predict how high-order dispersion is modified with bending. This study can provide insights for dispersion engineering, in which bending could be used as a tuning, equalization, or tailoring mechanism for λ0, which can be used in the development of compact nonlinear optical devices based on fibers or other bent-waveguide structures.

Intermodal Four-Wave Mixing and Parametric Amplification in Kilometer-Long Multimode Fibers

We theoretically and numerically investigate intermodal four-wave-mixing in km-long fibers, where random birefringence fluctuations are present along the fiber length. We identify several distinct regimes that depend on the relative magnitude between the length scale of the random fluctuations and the beat-lengths of the interacting quasi-degenerate modes. In addition, we analyze the impact of polarization mode-dispersion and we demonstrate that random variations of the core radius, which are typically encountered during the drawing stage of the fiber, can represent the major source of bandwidth impairment. These results set a boundary on the limits of validity of the classical Manakov model and may be useful for the design of multimode parametric amplifiers and wavelength converters, as well as for the analysis of nonlinear impairments in long-haul spatial division multiplexed transmission.

Synchronous optical packet switch architecture with tunable single and multi-channels wavelength converters

Abstract In this paper, we propose a bufferless synchronous optical packet switch (OPS) architecture named the Limited-range wavelength conversion with Dynamic Pump-wavelength Selection (LDPS) architecture. LDPS is equipped with a dedicated limited-range wavelength converters (LRWCs, and a shared pool of parametric wavelength converters (PWCs) with dynamic pump-wavelength selection (DPS). The adoption of hybrid conversion types in the proposed architecture aims at improving the packet loss rate (PLR) compared to conventional architecture with single conversion types, while reducing (or at least maintaining) the conversion distance ( d ) of used wavelength converters. Packet contention in the proposed architecture is resolved using the first available algorithm (FAA) and the dynamic pump-wavelength selection algorithm (DPSA). The performance of the proposed architecture is compared to two well-known conventional architectures; namely, the LRWC architecture that uses dedicated LRWCS for each input wavelength, and the DPS architecture that uses a shared pool of dynamic pump-wavelength converters (PWCs). Simulation results show that, for the same value of d , the new architecture reduces the PLR compared to the LRWC architecture by up to 40 % and 99.7 % for traffic loads, 0.5 and 1; respectively. In addition, for d = 1 , the new architecture reduces the PLR compared to the DPS architecture by up to 10 % and 99.3 % for traffic loads, 0.5 and 1; respectively.

High average power parametric wavelength conversion at 3.31-3.48 m in MgO:PPLN.

We present results of high average power mid-infrared (mid-IR) generation employing synchronized nanosecond pulsed ytterbium and erbium fiber amplifier systems using periodically poled lithium niobate. We generate greater than 6 W of mid-IR radiation tunable in wavelength between 3.31-3.48 μm, at power conversion efficiencies exceeding 75%, with near diffraction limited beam quality (M2 = 1.4). Numerical modeling is used to verify the experimental results in differing pump depletion regimes.

High-Brightness Continuously Tunable Narrowband Subterahertz Wave Generation

We report on the generation of high-brightness (high peak power and narrow linewidth) continuously tunable subterahertz waves by optical parametric wavelength conversion using lithium niobate as a nonlinear optical crystal. The high-brightness subterahertz waves were achieved by expanding the interaction volume of the pumping beam and the idler wave, as well as the subterahertz wave, during wavelength conversion and by injecting the seeding beam into the idler wave. We could continuously tune the wavelengths of the generated subterahertz waves by controlling the angle and wavelength difference between the pumping and injection seeding beams to satisfy the noncollinear phase-matching conditions. The high-brightness (maximum peak output power, linewidth) and tunable range were about 10 MW/sr· cm 2 (>7 kW, <;5 GHz), and 760-150 μm (0.39-2 THz), respectively.

W‐type highly erbium‐doped active soft‐glass fibre with high nonlinearity

A highly nonlinear W-type erbium-doped fibre with high dopant concentration made of three lead silicate glass materials (Schott SF57, LLF1 and SF6) is presented. The fibre is designed to have a flat anomalous dispersion at ∼1.55 μm, which is critical for enhancing parametric wavelength conversion. With this fibre, signals at ∼ 1.55 μm are successfully amplified in continuous-wave and pico-second-pulsed formats with a 1.48 μm pump source. In particular, spectral broadening of over 350 nm together with strong degenerate four-wave-mixing effects is demonstrated. The authors highlight that this novel fibre combines, for first time to their knowledge, the benefits of highly doped active fibres with those of dispersion/nonlinearity-engineered fibres.