Panchromatic Remote-sensing Instrument For Stereo Mapping Research Articles

UPDATES OF ‘AW3D30’ ALOS GLOBAL DIGITAL SURFACE MODEL IN ANTARCTICA WITH OTHER OPEN ACCESS DATASETS

Abstract. In 2016, the first processing of the semi-global digital surface models (DSMs) utilizing all the archives of stereo imageries derived from the Panchromatic Remote sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS) was successfully completed. The dataset was freely released to the public in 30 m grid spacing as the ‘ALOS World 3D - 30m (AW3D30)’, which was generated from its original version processed in 5 m or 2.5 m grid spacing. The dataset has been updated since then to improve the absolute/relative height accuracies with additional calibrations. However, the most significant update that should be applied for improving the data usability is the filling of void areas, which correspond to approx. 10% of semiglobal coverage, mostly due to cloud covers. In 2020, we completed the filling process by using other open-access digital elevation models (DEMs) such as Shuttle Radar Topography Mission (SRTM) DEM, Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM), ArcticDEM, etc., except for Antarctica. In this paper, we report on the filling process of the remaining voids in Antarctica by using other open-access DEMs such as Reference Elevation Model of Antarctica (REMA) DSM, TerraSAR-X add-on for Digital Elevation Measurement (TanDEM-X, TDX) 90m DEM, and ASTER GDEM to complete the void-free semi-global AW3D30 datasets.

UPDATES OF ‘AW3D30’ ALOS GLOBAL DIGITAL SURFACE MODEL WITH OTHER OPEN ACCESS DATASETS

Abstract. In 2016 we first completed the global data processing of digital surface models (DSMs) by using the whole archives of stereo imageries derived from the Panchromatic Remote sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS). The dataset was freely released to the public in 30 m grid spacing as the ‘ALOS World 3D - 30m (AW3D30)’, which was generated from its original version processed in 5 m or 2.5 m grid spacing. The dataset has been updated since then to improve the absolute/relative height accuracies with additional calibrations. However the most significant update that should be applied for improving the data usability is the filling of void areas, which correspond to approx. 10% of global coverage, mostly due to cloud covers. In this paper we introduce the updates of AW3D30 filling the voids with other open-access DSMs such as Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM), Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM), ArcticDEM, etc., through inter-comparisons among these datasets.

Topographic Analysis of Landslide Distribution Using AW3D30 Data

Landslides cause serious damage to society, and some occur as reactivations of old landslides in response to earthquakes and/or rainfall. Landslide distributions are therefore useful when siting engineering projects such as road and tunnel constructions. Although several methods have been proposed to extract landslides from topographic data on the basis of their morphological features (crown, main scarp, and main body), such morphological features are gradually eroded by heavy precipitation or landslide recurrence. Therefore, conventional methods cannot always identify areas influenced by recurrent landslides. In this study, we investigated the relationship between ridgeline continuity and landslide distribution using AW3D30, which is a global digital surface model (DSM) dataset produced from the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS) launched by the Japan Aerospace Exploration Agency (JAXA) in 2013. The relationship between the area of landslides and the number of ridge pixels was analyzed, and we propose a method for estimating the upper bound distribution of landslide topographies based on extracted ridgelines data using the Data Envelopment Analysis (DEA) function on the R statistical software packages. The upper bound on the area of landslides decreases as the number of ridge pixels increases. The same trend was seen in all the five sites, and the upper bound derived from one site is hardly exceeded by those derived from all other sites. By using the upper bound distribution function, the landslide distribution will not be missed.

Dimension reduction of multi-temporal elevation data

Near-global digital elevation models (DEMs) with a horizontal resolution 1 arc sec, from the Shuttle Radar Topography Mission (SRTM DEM), the Advanced Space borne Thermal Emission and Reflection Radiometer (ASTER DEM) sensor, and the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) on board the Advanced Land Observing Satellite (ALOS DEM) are available. These three elevation products present differences in the elevation conceptual framework resulting from noise and error effects as well as to changes in landcover and geomorphology of earth surface. The aim of this research effort is to highlight the differences among these three DEMS. Towards this end, a method is presented that is capable of decomposing the multi-dimensional elevation data formed by these 3 DEMs to two components: (a) the first one (adjusted DEMs) includes the mostly similar/common information among the initial DEMs, while (b) the second one (residual DEMs) maximizes the differences among the data. Adjusted DEMs might be used as first-degree “optimal” terrain representations while the residual DEMs are suitable to outline and map regions of high- and low-elevation variability among the three DEMs under comparison, due to (a) errors, (b) differences in the elevation conceptual framework among the three DEMs, and (c) landcover change over time.

Pixel-Based Geometric Assessment of Channel Networks/Orders Derived from Global Spaceborne Digital Elevation Models

Digital Elevation Models (DEMs) contribute to geomorphological and hydrological applications. DEMs can be derived using different remote sensing-based datasets, such as Interferometric Synthetic Aperture Radar (InSAR) (e.g., Advanced Land Observing Satellite (ALOS) Phased Array type L-band SAR (PALSAR) and Shuttle Radar Topography Mission (SRTM) DEMs). In addition, there is also the Digital Surface Model (DSM) derived from optical tri-stereo ALOS Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) imagery. In this study, we evaluated satellite-based DEMs, SRTM (Global) GL1 DEM V003 28.5 m, ALOS DSM 28.5 m, and PALSAR DEMs 12.5 m and 28.5 m, and their derived channel networks/orders. We carried out these assessments using Light Detection and Ranging (LiDAR) Digital Surface Models (DSMs) and Digital Terrain Models (DTMs) and their derived channel networks and Strahler orders as reference datasets at comparable spatial resolutions. We introduced a pixel-based method for the quantitative horizontal evaluation of the channel networks and Strahler orders derived from global DEMs utilizing confusion matrices at different flow accumulation area thresholds (ATs) and pixel buffer tolerance values (PBTVs) in both ±X and ±Y directions. A new Python toolbox for ArcGIS was developed to automate the introduced method. A set of evaluation metrics—(i) producer accuracy (PA), (ii) user accuracy (UA), (iii) F-score (F), and (iv) Cohen’s kappa index (KI)—were computed to evaluate the accuracy of the horizontal matching between channel networks/orders extracted from global DEMs and those derived from LiDAR DTMs and DSMs. PALSAR DEM 12.5 m ranked first among the other global DEMs with the lowest root mean square error (RMSE) and mean difference (MD) values of 4.57 m and 0.78 m, respectively, when compared to the LiDAR DTM 12.5 m. The ALOS DSM 28.5 m had the highest vertical accuracy with the lowest recorded RMSE and MD values of 4.01 m and −0.29 m, respectively, when compared to the LiDAR DSM 28.5 m. PALSAR DEM 12.5 m and ALOS DSM 28.5 m-derived channel networks/orders yielded the highest horizontal accuracy when compared to those delineated from LiDAR DTM 12.5 m and LiDAR DSM 28.5 m, respectively. The number of unmatched channels decreased when the PBTV increased from 0 to 3 pixels using different ATs.

Quantifying mass balance of East-Karakoram glaciers using geodetic technique

The Karakoram Range comprises the heavily glaciated mountains outside the Polar regions. A comprehensive assessment of glaciers variation in this region is crucial to ascertain constant water supply under different scenarios of futuristic climate change. Lack of accessibility to the Karakoram region has limited the use of conventional methods in monitoring variations in thickness and mass of glaciers, alternatively promoting the use of remote sensing based methods. The present study quantifies changes in thickness and mass budget of 24 glaciers in East-Karakoram region using geodetic technique. The Digital Elevation Model (DEM) adjustments and comparisons were made between Shuttle Radar Topography Mission (SRTM) C-band DEM, year 2000 and recent DEMs of the years 2009 and 2014, which were generated using stereo pairs of Panchromatic Remote Sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS) and Cartosat-1 respectively. The vertical accuracy of recent DEMs was assessed using ICESat-1 laser points. Other biases such as elevation dependent, radar penetration, terrain curvature and seasonality were also rectified before computing the glacier mass balance. Geodetic esimates indicate an overall marginal thinning (−0.09 ± 0.16 m/yr) and negative mass budget (−0.08 ± 0.13 m.w.e./yr) during the years 2000–2014. Interestingly, one glacier showed surge-type activity (advancing and thickening terminus) during 2000-2014, with highest (0.59) Accumulation Area Ratio (AAR) amongst studied glaciers. Time series analysis of climate data (temperature and precipitation) recorded at field observatories depict overall warming in the East-Karakoram region. The higher rate of mass loss during 2009–2014 (−0.07 ± 0.13 m.w.e./yr) compared to 2000–2009 (−0.05 ± 0.12 m.w.e./yr) was found in agreement with the rise in temperature and decline in precipitation over the region during different years. The results thus indicate an insignificant mass loss in East-Karakoram glaciers and thus exhibit a nearly balanced state since the year 2000 in contrast to glacier mass loss in other Himalayan ranges.

Generation of a high-accuracy regional DEM based on ALOS/PRISM imagery of East Antarctica

A digital elevation model (DEM) is used to estimate ice-flow velocities for an ice sheet and glaciers via Differential Interferometric Synthetic Aperture Radar (DInSAR) processing. The accuracy of DInSAR-derived displacement estimates depends upon the accuracy of the DEM. Therefore, we used stereo optical images, obtained with a panchromatic remote-sensing instrument for stereo mapping (PRISM) sensor mounted onboard the Advanced Land Observing Satellite (ALOS), to produce a new DEM (“PRISM-DEM”) of part of the coastal region of Lützow–Holm Bay in Dronning Maud Land, East Antarctica. We verified the accuracy of the PRISM-DEM by comparing ellipsoidal heights with those of existing DEMs and values obtained by satellite laser altimetry (ICESat/GLAS) and Global Navigation Satellite System surveying. The accuracy of the PRISM-DEM is estimated to be 2.80 m over ice sheet, 4.86 m over individual glaciers, and 6.63 m over rock outcrops. By comparison, the estimated accuracy of the ASTER-GDEM, widely used in polar regions, is 33.45 m over ice sheet, 14.61 m over glaciers, and 19.95 m over rock outcrops. For displacement measurements made along the radar line-of-sight by DInSAR, in conjunction with ALOS/PALSAR data, the accuracy of the PRISM-DEM and ASTER-GDEM correspond to estimation errors of <6.3 mm and <31.8 mm, respectively.

Accuracy Improvements in the Orientation of ALOS PRISM Images Using IOP Estimation and UCL Kepler Platform Model

This paper presents a study that was conducted to determine the orientation of ALOS (Advanced Land Observing Satellite) PRISM (Panchromatic Remote-sensing Instrument for Stereo Mapping) triplet images, considering the estimation of interior orientation parameters (IOP) of the cameras and using the collinearity equations with the UCL (University College of London) Kepler platform model, which was adapted to use coordinates referenced to the Terrestrial Reference System ITRF97. The results of the experiments showed that the accuracies of 3D coordinates calculated using 3D photogrammetric intersection increased when the IOP were also estimated. The vertical accuracy was significantly better than the horizontal accuracy. The usability of the estimated IOP was tested to perform the bundle block adjustments of another neighbouring PRISM image triplet. The results in terms of 3D photogrammetric intersection were satisfactory and were close to those obtained in the IOP estimation experiment.

Biomass retrieval from L-band polarimetric UAVSAR backscatter and PRISM stereo imagery

The forest above-ground biomass (AGB) and spatial distribution of vegetation elements have profound effects on the productivity and biodiversity of terrestrial ecosystems. In this paper, we evaluated biomass estimation from L-band Synthetic Aperture Radar (SAR) data acquired by National Aeronautics and Space Administration (NASA) Uninhabited Aerial Vehicle SAR (UAVSAR) and the improvement of accuracy by adding canopy height information derived from stereo imagery acquired by Japan Aerospace Exploration Agency (JAXA) Panchromatic Remote Sensing Instrument for Stereo Mapping (PRISM) on-board the Advanced Land Observing Satellite (ALOS). Various models for prediction of forest biomass from UAVSAR data were investigated at pixel sizes of 1/4ha (50m×50m) and 1 ha. The variance inflation factor (VIF) was calculated for each of the explanatory variables in multivariable regression models to assess the multi-collinearity between explanatory variables. In addition, the t- and p-values were used to interpret the significance of the coefficients of each explanatory variables. The R2, Root Mean Square Error (RMSE), bias and Akaike information criterion (AIC), and leave-one-out cross-validation (LOOCV) and bootstrapping were used to validate models. At 1/4-ha scale, the R2 and RMSE of biomass estimation from a model using a single track of polarimetric UAVSAR data were 0.59 and 52.08Mg/ha. With canopy height from PRISM as additional independent variable, R2 increased to 0.76 and RMSE decreased to 39.74Mg/ha (28.24%). At 1-ha scale, the RMSE of biomass estimation based on UAVSAR data of a single track was 39.42Mg/ha with a R2 of 0.77. With the canopy height from PRISM, R2 increased to 0.86 and RMSE decreased to 29.47 Mg/ha (20.18%). The models using UAVSAR data alone underestimated biomass at levels above ~150Mg/ha showing the saturation phenomenon. Adding canopy height from PRISM stereo imagery significantly improved the biomass estimation and elevated the saturation level in estimating biomass. Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation. Combined use of UAVSAR data acquired from opposite directions (odd and even tracks) slightly improved the biomass estimation at 1/4-ha scale, R2 increased from 0.59 to 0.66 and RMSE reduced from 52.08 to 48.57Mg/ha. Averaging multiple acquisitions of UAVSAR data from the same look azimuth direction did not improve biomass estimation. A biomass map derived from NASA's LVIS (Laser Vegetation Imaging System) waveform data was used as a reference for evaluation of the biomass maps from these models. The study has also shown that the errors decreased when deciduous, evergreen, and mixed forests were modeled separately but the improvement was not significant.

Automatic estimation of bias parameters of RPC model and ground coordinates from multi-directional satellite images

Advanced Land Observing Satellite (ALOS)/Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) measured triplet images at forward, nadir and backward view directions, and the digital surface model (DSM) is generated from set of triplet images. Existing methods generate multiple DSMs from individual triplet images, and eliminate the effects of outliers by taking average. The proposed method in this paper solves multiple observation equations from all triplet images, and simultaneously determines bias parameters contaminated in the rational polynomial coefficient (RPC) model and ground coordinates. The experimental results showed that errors of the coordinates estimated by using multi-temporal triplet images were almost as small as those estimated with manually determined bias parameters in case of 4 or more sets of triplet images. As a result, we conclude that the proposed method is effective for stably generating accurate DSMs from multi-temporal triplet images.

Landslide detection using ALOS optical and radar data. A case study from the Ilia prefecture.

In this study the usefulness of the ALOS optical and radar data for landslide monitoring is examined. ALOS contains three sensors, commonly referred to as the “three eyes” of ALOS. These sensors are: the Panchromatic Remote-Sensing Instrument for Stereo Mapping (PRISM), the Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2), and the Phased Array type L-band Synthetic Aperture Radar (PALSAR). The area of study is located in a small village named Sykies near to the city of Andritsena in Western Peloponnese. The area suffered during the last years from enormous fires. As a result many landslides have been recorded. One of the latest Landslides has been recorded on January 2009 as a consequence of heavy rains. That landslide was mapped in situ using differential GPS. The possibility of detecting and mapping the specific landslide using ALOS data is examined in this study and the results are presented. Thirty ALOS radar images within a period of three years, two ALOS Prism data sets and two ALOS AVNIR collected over the same area within a year were used.

Classification of Land Use on Sand-Dune Topography by Object-Based Analysis, Digital Photogrammetry, and GIS Analysis in the Horqin Sandy Land, China

Previous field research on the Horqin Sandy Land (China), which has suffered from severe desertification during recent decades, revealed how land use on a sand-dune topography affects both land degradation and restoration. This study aimed to depict the spatial distribution of local land use in order to shed more light on previous field findings regarding policies on a broader scale. We performed the following analyses with Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) and Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2) images of Advanced Land Observing Satellite (ALOS): (1) object-based classification to discriminate preliminary classification of land-use types that were approximately differentiated by ordinary pixel-based analysis with spectral information; (2) digital photogrammetry to generate a digital surface model (DSM) with adequately high accuracy to represent undulating sand-dune topography; (3) geographic information system (GIS) analysis to classify major topographic types with the digital surface model (DSM); and (4) overlay of the two classification results to depict the local land-use types. The overall accuracies of the object-based and GIS-based classifications were high, at 93% (kappa statistic: 0.84) and 89% (kappa statistic: 0.81), respectively. The resultant local land-use map represents areas covered in previous field studies, showing where and how land degradation and restoration are likely to occur. This research can contribute to future environmental surveys, models, and policies in the study area.

GENERATION OF THE 30 M-MESH GLOBAL DIGITAL SURFACE MODEL BY ALOS PRISM

Abstract. Topographical information is fundamental to many geo-spatial related information and applications on Earth. Remote sensing satellites have the advantage in such fields because they are capable of global observation and repeatedly. Several satellite-based digital elevation datasets were provided to examine global terrains with medium resolutions e.g. the Shuttle Radar Topography Mission (SRTM), the global digital elevation model by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER GDEM). A new global digital surface model (DSM) dataset using the archived data of the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS, nicknamed “Daichi”) has been completed on March 2016 by Japan Aerospace Exploration Agency (JAXA) collaborating with NTT DATA Corp. and Remote Sensing Technology Center, Japan. This project is called “ALOS World 3D” (AW3D), and its dataset consists of the global DSM dataset with 0.15 arcsec. pixel spacing (approx. 5 m mesh) and ortho-rectified PRISM image with 2.5 m resolution. JAXA is also processing the global DSM with 1 arcsec. spacing (approx. 30 m mesh) based on the AW3D DSM dataset, and partially releasing it free of charge, which calls “ALOS World 3D 30 m mesh” (AW3D30). The global AW3D30 dataset will be released on May 2016. This paper describes the processing status, a preliminary validation result of the AW3D30 DSM dataset, and its public release status. As a summary of the preliminary validation of AW3D30 DSM, 4.40 m (RMSE) of the height accuracy of the dataset was confirmed using 5,121 independent check points distributed in the world.

GENERATION OF THE 30 M-MESH GLOBAL DIGITAL SURFACE MODEL BY ALOS PRISM

Topographical information is fundamental to many geo-spatial related information and applications on Earth. Remote sensing satellites have the advantage in such fields because they are capable of global observation and repeatedly. Several satellite-based digital elevation datasets were provided to examine global terrains with medium resolutions e.g. the Shuttle Radar Topography Mission (SRTM), the global digital elevation model by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER GDEM). A new global digital surface model (DSM) dataset using the archived data of the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS, nicknamed “Daichi”) has been completed on March 2016 by Japan Aerospace Exploration Agency (JAXA) collaborating with NTT DATA Corp. and Remote Sensing Technology Center, Japan. This project is called “ALOS World 3D” (AW3D), and its dataset consists of the global DSM dataset with 0.15 arcsec. pixel spacing (approx. 5&amp;thinsp;m mesh) and ortho-rectified PRISM image with 2.5&amp;thinsp;m resolution. JAXA is also processing the global DSM with 1&amp;thinsp;arcsec. spacing (approx. 30&amp;thinsp;m mesh) based on the AW3D DSM dataset, and partially releasing it free of charge, which calls “ALOS World 3D 30&amp;thinsp;m mesh” (AW3D30). The global AW3D30 dataset will be released on May 2016. This paper describes the processing status, a preliminary validation result of the AW3D30 DSM dataset, and its public release status. As a summary of the preliminary validation of AW3D30 DSM, 4.40&amp;thinsp;m (RMSE) of the height accuracy of the dataset was confirmed using 5,121 independent check points distributed in the world.

VALIDATION OF "AW3D" GLOBAL DSM GENERATED FROM ALOS PRISM

Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM), one of onboard sensors carried by Advanced Land Observing Satellite (ALOS), was designed to generate worldwide topographic data with its optical stereoscopic observation. It has an exclusive ability to perform a triplet stereo observation which views forward, nadir, and backward along the satellite track in 2.5 m ground resolution, and collected its derived images all over the world during the mission life of the satellite from 2006 through 2011. A new project, which generates global elevation datasets with the image archives, was started in 2014. The data is processed in unprecedented 5 m grid spacing utilizing the original triplet stereo images in 2.5 m resolution. As the number of processed data is growing steadily so that the global land areas are almost covered, a trend of global data qualities became apparent. This paper reports on up-to-date results of the validations for the accuracy of data products as well as the status of data coverage in global areas. The accuracies and error characteristics of datasets are analyzed by the comparison with existing global datasets such as Ice, Cloud, and land Elevation Satellite (ICESat) data, as well as ground control points (GCPs) and the reference Digital Elevation Model (DEM) derived from the airborne Light Detection and Ranging (LiDAR).

VALIDATION OF "AW3D" GLOBAL DSM GENERATED FROM ALOS PRISM

Abstract. Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM), one of onboard sensors carried by Advanced Land Observing Satellite (ALOS), was designed to generate worldwide topographic data with its optical stereoscopic observation. It has an exclusive ability to perform a triplet stereo observation which views forward, nadir, and backward along the satellite track in 2.5 m ground resolution, and collected its derived images all over the world during the mission life of the satellite from 2006 through 2011. A new project, which generates global elevation datasets with the image archives, was started in 2014. The data is processed in unprecedented 5 m grid spacing utilizing the original triplet stereo images in 2.5 m resolution. As the number of processed data is growing steadily so that the global land areas are almost covered, a trend of global data qualities became apparent. This paper reports on up-to-date results of the validations for the accuracy of data products as well as the status of data coverage in global areas. The accuracies and error characteristics of datasets are analyzed by the comparison with existing global datasets such as Ice, Cloud, and land Elevation Satellite (ICESat) data, as well as ground control points (GCPs) and the reference Digital Elevation Model (DEM) derived from the airborne Light Detection and Ranging (LiDAR).

Mapping Aboveground Biomass in Northern Japanese Forests Using the ALOS PRISM Digital Surface Model

We tested the performance of the stereo observations of the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS) in the mapping of forest aboveground biomass (AGB) in Japan. Digital canopy height models (DCHMs), which are differences between PRISM digital surface models and surveying-based digital terrain models (DTMs), were compared to in situ AGB measurements of several forest types (number of stands: 28; average stand size: 0.54 ha; stand size range: 0.25-3.00 ha). DCHM values exhibited a significant correlation with AGB (r = 0.66-0.87; five different DCHMs), and the root-mean-square error and bias of the regression model evaluated by the leave-one-out cross-validation were 37.2-57.8t/ha(22.1%-32.6%) and-0.11-1.89 t/ha, respectively. There was no saturation in the relationship between DCHM and AGB (AGB range: 19-332 t/ha). The correlations between DCHM and mean canopy height (r = 0.17-0.52) and between DCHM and Lorey's height (r = 0.26-0.66) were weaker than the correlation between DCHM and AGB. The PRISM AGB distribution estimated by the regression model was consistent with a tree density map produced from aerial photos. Comparison to Phased Array-type L-band Synthetic Aperture Radar (PALSAR) data showed that the PRISM DCHMs can estimate high AGB over the saturation level of PALSAR backscattering coefficient, i.e., 100-200 t/ha. The results described here demonstrate that the PRISM DCHMs are capable of wall-to-wall AGB estimation at 50-m resolution. This approach will be useful for improving the performance of satellite-based AGB estimation when an accurate DTM is available.

IMPROVING THE ACCURACY OF ESTIMATED 3D POSITIONS USING MULTI-TEMPORAL ALOS/PRISM TRIPLET IMAGES

Abstract. In this paper, we present a method to improve the accuracy of a digital surface model (DSM) by utilizing multi-temporal triplet images. The Advanced Land Observing Satellite (ALOS) / Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) measures triplet images in the forward, nadir, and backward view directions, and a DSM is generated from the obtained set of triplet images. To generate a certain period of DSM, multiple DSMs generated from individual triplet images are compared, and outliers are removed. Our proposed method uses a traditional surveying approach to increase observations and solves multiple observation equations from all triplet images via the bias-corrected rational polynomial coefficient (RPC) model. Experimental results from using five sets of PRISM triplet images taken of the area around Saitama, north of Tokyo, Japan, showed that the average planimetric and height errors in the coordinates estimated from multi-temporal triplet images were 3.26 m and 2.71 m, respectively, and that they were smaller than those generated by using each set of triplet images individually. As a result, we conclude that the proposed method is effective for stably generating accurate DSMs from multi-temporal triplet images.

Precise Global DEM Generation by ALOS PRISM

Abstract. The Japan Aerospace Exploration Agency (JAXA) generated the global digital elevation/surface model (DEM/DSM) and orthorectified image (ORI) using the archived data of the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS, nicknamed "Daichi"), which was operated from 2006 to 2011. PRISM consisted of three panchromatic radiometers that acquired along-track stereo images. It had a spatial resolution of 2.5 m in the nadir-looking radiometer and achieved global coverage, making it a suitable potential candidate for precise global DSM and ORI generation. In the past 10 years or so, JAXA has conducted the calibration of the system corrected standard products of PRISM in order to improve absolute accuracies as well as to validate the high-level products such as DSM and ORI. In this paper, we introduce an overview of the global DEM/DSM dataset generation project, including a summary of ALOS and PRISM, in addition to the global data archive status. It is also necessary to consider data processing strategies, since the processing capabilities of the level 1 standard product and the high-level products must be developed in terms of both hardware and software to achieve the project aims. The automatic DSM/ORI processing software and its test processing results are also described.

Generation of High Resolution Global DSM from ALOS PRISM

Abstract. Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM), one of onboard sensors carried on the Advanced Land Observing Satellite (ALOS), was designed to generate worldwide topographic data with its optical stereoscopic observation. The sensor consists of three independent panchromatic radiometers for viewing forward, nadir, and backward in 2.5 m ground resolution producing a triplet stereoscopic image along its track. The sensor had observed huge amount of stereo images all over the world during the mission life of the satellite from 2006 through 2011. We have semi-automatically processed Digital Surface Model (DSM) data with the image archives in some limited areas. The height accuracy of the dataset was estimated at less than 5 m (rms) from the evaluation with ground control points (GCPs) or reference DSMs derived from the Light Detection and Ranging (LiDAR). Then, we decided to process the global DSM datasets from all available archives of PRISM stereo images by the end of March 2016. This paper briefly reports on the latest processing algorithms for the global DSM datasets as well as their preliminary results on some test sites. The accuracies and error characteristics of datasets are analyzed and discussed on various fields by the comparison with existing global datasets such as Ice, Cloud, and land Elevation Satellite (ICESat) data and Shuttle Radar Topography Mission (SRTM) data, as well as the GCPs and the reference airborne LiDAR/DSM.