Palladium-catalyzed Allylic Substitution Reactions Research Articles

A first example of a palladium-catalyzed allylic substitution reaction at a perfluoroalkylene-attached asymmetric carbon center with carbon, nitrogen, and oxygen nucleophiles

Palladium-catalyzed allylic substitution reaction of ethyl tetrafluorocyclopentenyl carbonate or tetrafluorocyclopentenyl methanesulfonate with carbon, nitrogen, and oxygen nucleophiles was systematically investigated. As a result, malonate-derived enolates as a carbon nucleophile, primary and secondary amines as a nitrogen nucleophile, and phenoxide derivatives as an oxygen nucleophile participated all in the reaction very well to furnish the corresponding allylated malonates, allylic amines, and allyl aryl ethers in high yields, respectively. DFT calculations of the reaction mechanism indicate that the direction of nucleophile's attack in the case of carbon nucleophiles, unlike other nucleophiles, is considerably off from the ideal direction, and thus the distance of the newly formed carbon-carbon bond is also considerably longer than the commonly accepted one. It was found then that the activation energies for reactions with carbon nucleophiles were considerably larger than those for reactions with nitrogen or oxygen nucleophiles, and hence the reaction with carbon nucleophiles is less likely proceed.

Chiral phosphine ligand libraries based on the Bull–James three-component supramolecular assembly

ABSTRACTAn approach to the synthesis of libraries of chiral phosphine ligands is described, using condensations of 2-formylarylboronic acids, diols or related compounds, and aminophosphines. The three-component nature of this condensation, along with the ready availability of the building blocks, enables the rapid generation of diverse structures. From a library of iminoboronate-derived phosphines, three ligands that gave 90% ee or greater in a benchmark palladium-catalyzed allylic substitution reaction were identified. Significant variation of selectivity as a function of the structure of each component was observed. 11B NMR spectroscopy was used to evaluate the existence of B–N interactions in the free ligands as well as their Pd-derived complexes. A bidentate P,N-coordination mode was inferred for ligands that gave high enantioselectivity in the allylic substitution reaction.Abbreviation: BINOL: 1,1'-bi-2-naphthol; BSA: N,O-bis(trimethylsilyl)acetamide; DIOP: (2,3-O-isopropylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane; HPLC: high-performance liquid chromatography; NMR: nuclear magnetic resonance; THF: tetrahydrofuran

Selective single C-F bond arylation of trifluoromethylalkene derivatives.

A strategically novel single C-F bond functionalization of CF3-derived molecules, which shows a prominent advantage for the expedient construction of difluoromethylene-bridged organic scaffolds, is disclosed. The reported protocol consists of SN2' amination, N-alkylation and palladium-catalyzed allylic substitution reactions, which enables straightforward arylation and alkenylation of vinyltrifluoromethane derivatives. Furthermore, this strategy is characterized by its broad substrate scope with respect to both CF3-alkene and arylboronic acid derivatives.

Non-Bonding Interactions Enable the Selective Formation of Branched Products in Palladium-Catalyzed Allylic Substitution Reactions.

Palladium-catalyzed allylic substitution reactions have become established as an important tool for the construction of carbon-carbon and carbon-heteroatom bonds in modern organic synthesis. However, controlling the regioselectivity of this type of transformation to afford chiral branched products, in addition to controlling the enantioselectivity, is a significant challenge. Excitingly, controlling nonbonding interactions between the substituents on the π-allyl-palladium intermediate and the nucleophile or palladium catalyst has been shown to be effective in achieving this goal. This Focus Review highlights representative advances in this field, according to the mode of non-bonding interaction, including hydrogen-bonding, electrostatic, and coordination interactions.

Et3B-mediated palladium-catalyzed direct allylic substitution reactions of Morita–Baylis–Hillman alcohols with aromatic amines

ABSTRACTAn efficient, direct allylic amination of both cyclic and acyclic Morita–Baylis–Hillman alcohols with aromatic amines, in tetrahydrofuran (THF) at room temperature, catalyzed by Pd(0)/Et3B, is reported herein. The corresponding amines are obtained with a high α -regioselectivity in 65–87% yields.

Palladium/N-heterocyclic carbene catalysed regio and diastereoselective reaction of ketones with allyl reagents via inner-sphere mechanism.

The palladium-catalysed allylic substitution reaction is one of the most important reactions in transition-metal catalysis and has been well-studied in the past decades. Most of the reactions proceed through an outer-sphere mechanism, affording linear products when monosubstituted allyl reagents are used. Here, we report an efficient Palladium-catalysed protocol for reactions of β-substituted ketones with monosubstituted allyl substrates, simply by using N-heterocyclic carbene as ligand, leading to branched products with up to three contiguous stereocentres in a (syn, anti)-mode with excellent regio and diastereoselectivities. The scope of the protocol in organic synthesis has been examined preliminarily. Mechanistic studies by both experiments and density functional theory (DFT) calculations reveal that the reaction proceeds via an inner-sphere mechanism—nucleophilic attack of enolate oxygen on Palladium followed by C–C bond-forming [3,3']-reductive elimination.

Nickel-Catalyzed Allylic Alkylation with Diarylmethane Pronucleophiles: Reaction Development and Mechanistic Insights.

Palladium-catalyzed allylic substitution reactions are among the most efficient methods to construct C-C bonds between sp(3)-hybridized carbon atoms. In contrast, much less work has been done with nickel catalysts, perhaps because of the different mechanisms of the allylic substitution reactions. Palladium catalysts generally undergo substitution by a "soft"-nucleophile pathway, wherein the nucleophile attacks the allyl group externally. Nickel catalysts are usually paired with "hard" nucleophiles, which attack the metal before C-C bond formation. Introduced herein is a rare nickel-based catalyst which promotes substitution with diarylmethane pronucleophiles by the soft-nucleophile pathway. Preliminary studies on the asymmetric allylic alkylation are promising.

Atroposelective synthesis of axially chiral P,S-ligands based on arynes

An unprecedented atropo-diastereoselective aryl–aryl coupling via arynes allows for the modular synthesis of enantiopure P,S-ligands.

Selective synthesis of cyclododec-2-en-1-yl ethers via palladium-catalyzed allylic substitution reaction: a kinetic study

The palladium-catalyzed reaction between isomeric cyclododec-2-en-1-yl acetates and primary aliphatic alcohols was found to result in high yields of the reaction products obtained. The selectivity with respect to cyclododec-2-en-1-yl ethers formed as reaction products ranged from 73% to 93%. The kinetics of the reaction of acetoxycyclododec-2-enes with alcohols was studied within the temperature range of 328--358 K. A kinetic equation best fitting the experimental data was provided.

ChemInform Abstract: N1‐Functionalized Indole‐Phosphane Oxazoline (IndPHOX) Ligands in Asymmetric Allylic Substitution Reactions.

N-Functionalized IndPHOX ligands bearing various groups have been synthesized and the effects of the N1-substituent on the reaction rate, yield, and asymmetric induction in a palladium-catalyzed allylic substitution reaction are reported. The presence of an oxygen atom in the ligands, namely an N-MOM or N-THP group, led to enhancement of the enantioselectivity in the allylic amination reaction. In addition, a ligand with a chiral oxazoline ring at C-1 and a phosphane substituent at C-2 provided high enantioselectivity in good yield in an asymmetric allylic alkylation reaction.

Artificial Metalloenzymes through Cysteine‐Selective Conjugation of Phosphines to Photoactive Yellow Protein

Pinning phosphines on proteins: A method for the cysteine-selective bioconjugation of phosphines has been developed. The photoactive yellow protein has been site-selectively functionalized with phosphine ligands and phosphine transition metal complexes to afford artificial metalloenzymes that are active in palladium-catalysed allylic nucleophilic substitution reactions.

Pyranoside Phosphite-Oxazoline Ligand Library: Highly Efficient Modular P,N Ligands for Palladium-Catalyzed Allylic Substitution Reactions. A Study of the Key Palladium Allyl Intermediates

We have screened a library of modular phosphite-oxazoline ligands for asymmetric allylic substitution reactions. The library is efficiently prepared from the commercially available and cheap D -glucosamine. The introduction of a phosphite moiety into the ligand design is highly advantageous for the product outcome. Therefore, this ligand library affords good-to-excellent reaction rates [TOFs up to 600 mol substrate x (mol Pd x h) -1 ] and enantioselectivities (ees up to 99%) and, at the same time, shows a broad scope for mono-, di- and trisubstituted linear hindered and unhindered substrates and cyclic substrates. The NMR studies on the palladium allyl intermediates provide a deeper understanding about the effect of the ligand parameters on the origin of enantioselectivity.

New Carbohydrate‐Based Phosphite‐Oxazoline Ligands as Highly Versatile Ligands for Palladium‐Catalyzed Allylic Substitution Reactions

AbstractWe have designed and synthesized a new family of readily available phosphite‐oxazoline ligands for Pd‐catalyzed asymmetric allylic substitution reactions. These ligands can be tuned in two regions to explore their effect on catalytic performance. By carefully selecting the ligand components, we obtained high enantioselectivities in the Pd‐catalyzed allylic substitution in substrates with different steric properties

Palladium-Catalyzed Allylic Substitution Reaction in Polymer Synthesis

Polymer synthesis via the palladium-catalyzed allylic substitution reaction between allylic esters and malonic esters, namely the Tsuji-Trost reaction, is summarized in this review. Due to the versatility and potential of the Tsuji-Trost reaction, four polymerization patterns for various functionalized polymers have been reported.

Homogeneous Two‐Component Polycondensation Without Strict Stoichiometric Balance via the Tsuji—Trost Reaction: Remote Control of Two Reaction Sites by Catalysis.

Carothers and Flory established the fundamental principles of homogeneous two-component polycondensation reactions by which a variety of commonly used polymers such as polyesters and polyamides (nylons) are synthesized even now. One of the most critical factors to achieve a high degree of polymerization is a strict adherence of stoichiometric balance of the two components. An imbalanced ratio of the two starting materials leads to lower degree of polymerization and, consequently, polymers of poor quality. Here we report the details of a strategy, validated by appropriate experiments, which enables an efficient homogeneous two-component polycondensation via palladium-catalyzed allylic substitution (the Tsuji−Trost) reaction without strict stoichiometric balance.

A new class of chiral P,N-ligands and their application in palladium-catalyzed asymmetric allylic substitution reactions.

An efficient and modular synthesis of a series of chiral nonracemic P,N-ligands is reported. The P,N-ligands were prepared from 2-chloro-4-methyl-6,7-dihydro-5H-[1]pyrindine-7-one and a series of substituted chiral C(2)-symmetric 1,2-ethanediols (R = Me, i-Pr, and Ph). The ligands were evaluated for use in catalytic asymmetric synthesis in the palladium-catalyzed allylic substitution reactions of a racemic allylic acetate and dimethyl malonate. In the case of the P,N-ligand (R = Ph), the reaction was found to be highly stereoselective (90% ee).

Pincer complex-catalyzed allylation of aldehyde and imine substrates via nucleophilic eta1-allyl palladium intermediates.

Electrophilic allylic substitution of allylstannanes with aldehyde and imine substrates could be achieved by employment of palladium pincer complex catalysts. It was found that the catalytic activity of the pincer complexes is highly dependent on the ligand effects. The best results were obtained by employment of PCP pincer complexes with weakly coordinating counterions. In contrast to previous applications for electrophilic allylic substitutions via bisallylpalladium complexes, the presented reactions involve monoallylpalladium intermediates. Thus, employment of pincer complex catalysts extends the synthetic scope of the palladium-catalyzed allylic substitution reactions. Moreover, use of these catalysts eliminates the side reactions occurring in transformations via bisallylpalladium intermediates. The key intermediate of the electrophilic substitution reaction was observed by (1)H NMR spectroscopy. This intermediate was characterized as an eta(1)-allyl-coordinated pincer complex. Density functional theory (DFT) modeling shows that the electrophilic attack can be accomplished with a low activation barrier at the gamma-position of the eta(1)-allyl moiety. According to the DFT calculations, this reaction takes place via a six-membered cyclic transition-state (TS) structure, in which the tridentate coordination state of the pincer ligand is preserved. The stereoselectivity of the reaction could be explained on the basis of the six-membered cyclic TS model.

Homogeneous two-component polycondensation without strict stoichiometric balance via the Tsuji-Trost reaction: remote control of two reaction sites by catalysis.

Carothers and Flory established the fundamental principles of homogeneous two-component polycondensation reactions by which a variety of commonly used polymers such as polyesters and polyamides (nylons) are synthesized even now. One of the most critical factors to achieve a high degree of polymerization is a strict adherence of stoichiometric balance of the two components. An imbalanced ratio of the two starting materials leads to lower degree of polymerization and, consequently, polymers of poor quality. Here we report the details of a strategy, validated by appropriate experiments, which enables an efficient homogeneous two-component polycondensation via palladium-catalyzed allylic substitution (the Tsuji-Trost) reaction without strict stoichiometric balance.

Stereoselective Ring Opening of meso Bicyclic Hydrazines: A Straightforward Approach to Hydrazino Cyclopentenic Cores.

AbstractFor Abstract see ChemInform Abstract in Full Text.

Effect of chelating vs. bridging coordination of chiral short-bite P-X-P (X=C, N, O) ligands in enantioselective palladium-catalysed allylic substitution reactions.

The chiral short-bite ligands (Ra,Ra)-bis(dinaphthylphosphonito)methane, (Ra,Ra)-1, (Ra,Ra)-bis-dinaphthylpyrophosphite, (Ra,Ra)-2, (Sc)-bis(diphenylphosphino)-sec-butylamine, (Sc)-3, (Ra,Ra)-bis(dinaphthylphosphonito)phenylamine, (Ra,Ra)-4a, (Ra,Ra,Sc)-bis(dinaphthylphosphonito)-sec-butylamine, (Ra,Ra,Sc)-4b, and (Ra,Sc)-(dinaphthylphosphonito)(diphenylphosphino)-sec-butylamine, (Ra,Sc)-5, have been synthesised. The cationic palladium-allyl mononuclear chelate, [Pd(eta3-PhCHCHCHPh)(mu-L-Lshort-bite)]PF6 [L-Lshort-bite=(Sc)-3, (Ra,Ra)-4a, (Ra,Ra,Sc)-4b and (Ra,Sc)-5 for complexes, and, respectively] and binuclear bridged [Pd(eta3-PhCHCHCHPh)(mu-Ra,Ra-2)]2(PF6)2, 12, have been isolated. The short-bite chiral ligands synthesised have been tested in the palladium-allyl catalysed substitution reaction of 1,3-diphenylallyl acetate with dimethyl malonate. The catalytic system was studied, in solution, by a multinuclear NMR technique. In the catalytically active species formed with (Ra,Ra)-2 ligand, [Pd(eta3-PhCHCHCHPh)(Ra,Ra-2)]2(PF6)2, 12, the palladium(II) centres are bridged by two ligands which are forced to adopt a nearly cis-coordination to allow coordination of the allyl-moiety. Semiempirical calculations on a biphenyl-model molecule, similar to the species 12, indicate that this situation induces a strain and rigid conformation in the chiral ligands, which produce differences in the terminal allyl carbon atoms. As consequence, the catalytic product was obtained with an enantiomeric excess of 57.1% in the S form. A low e.e. value was obtained when the (Ra,Ra)-1, (Sc)-3, (Ra,Ra)-4a, (Ra,Ra,Sc)-4b and (Ra,Sc)-5 ligands have been tested in the same palladium-catalysed reaction.