Palatal Area Research Articles

Conservative management of canine cleft palate can be a viable treatment option: 65 cases (2006-2023).

To evaluate nonsurgical management outcomes of cleft palate (CP) in dogs and identify any association between cleft size, prevalence of clinical signs, and quality of life (QoL). 65 dogs treated conservatively for CP from January 2006 through December 2023 were retrospectively identified. Diet, activity, medical history, and QoL were recorded for dogs that survived to the transition to solid food. Results were compared to those from 24 control dogs. Measurements of cleft area, width, and percentage of the hard palate occupied by the cleft were made with the use of calibrated photographs. Clefts were divided into 3 types: wide throughout, wide rostrally, and slit throughout. Sneezing was the most frequent clinical sign (43 of 65 over the past month, 34 of 65 when most affected). There was a greater frequency of material lodging in the cleft in the wide-throughout clefts (13 of 16 dogs) compared to the slit-throughout clefts (7 of 19 dogs). Veterinary removal of material was required in 10 of 68 episodes (7 of 31 dogs). There was no correlation between cleft size and prevalence of clinical signs or QoL. Sixty-three percent of dogs had a perfect QoL on a weighted scale, while 83.3% had a perfect score on a visual analog scale. Sixty-four of 65 owners would adopt another dog with a CP. Measures of QoL were favorable among dogs treated conservatively for CP. Conservative management appears to be a viable option for treatment of CPs in some dogs.

A DISTINCTIVE APPROACH TO REHABILITATE PATIENT WITH BILATERAL MAXILLECTOMY DEFECT BY TWO-PIECE HOLLOW OBTURATOR- CASE REPORT

An obturator is a common tool for prosthetic rehabilitation following invasive surgery, particularly in a total maxillectomy case. However, loss of teeth, palatal denture-bearing area, and vestibular retentive undercuts leaves an inadequate anatomic base to construct the definitive prosthesis. This results in compromised retention and stability. The retention problem can be resolved by fabricating an obturator that engages remaining undercuts. But in such acquired large defects, if all undercuts are engaged, the prosthesis may become too heavy, non-retentive, and challenging to insert, particularly in patients with very high and large defects. Therefore, in this case fabrication of two-piece magnet retained hollow obturator was described to make a prosthesis light weight with the use of thermoplastic polyvinyl chloride sheet in first part which provides adequate retention by engaging the desirable undercuts. The second part of the obturator was made hollow by the use of urinary catheter that was removed easily after completion of denture processing. After this, both the parts were attached together with the use of magnets. This technique is economical and easy to use to restore both function and esthetics in patients with bilateral maxillectomy defect.

Effects On Palatal Surface Area In Mixed Dentition Patients Treated With Leaf Expander And Rapid Palatal Expander, Compared To Untreated Subjects: A Randomised Clinical Trial.

To evaluate palatal surface effects induced by LE and RPE, alongside spontaneous changes in an untreated group, and to compare differences in canine and molar inclination among the three groups. This randomised clinical trial aimed to compare digital models pre- and post-treatment over 12 months in patients receiving tooth-borne Leaf Expander® (LE) and tooth-borne Hyrax-type maxillary expander (RPE) treatments, alongside untreated patients. Analysis included 24 LE patients (13 males, 11 females, mean age 8.5±1.5), 22 RPE patients (10 males, 12 females, mean age 7.9±1.6), and 17 untreated subjects (7 males, 10 females, mean age 8.1±1.2). Inclusion criteria comprised indications for maxillary expansion treatment, mixed dentition, CVMS ≤ 3, erupted first molars, and good oral hygiene. Digital models were obtained using an intraoral scanner pre- and post-treatment. Palatal surface, segmented into anterior, median, and posterior zones, and canine/molar inclination were measured at T0-T1 using VAM software as the primary and secondary endpoint. Statistical analyses involved paired-sample T-tests for intra-group comparisons and ANOVA tests with Bonferroni correction for inter-group comparisons. No significant difference in palatal surface increment was found between the two experimental groups (LE and RPE); both demonstrated a significant increase in palatal surface. The greatest increment occurred in the median palate zone for both experimental groups. The increment in the untreated control group was not significant. Furthermore, the RPE group showed a greater inclination of permanent molars compared to those treated with LE, indicating that expansion with lighter and continuous forces may lead to fewer dental side effects.

Three-dimensional analysis of posttreatment tooth movements despite bonded retainers: partI-upper jaw.

Adverse side effects of fixed retainers in terms of unwanted tooth movements have been described for both the upper and lower jaw, but data about the extent and movement patterns for the maxilla are scarce. The purpose of the present retrospective case-control study was to analyze the amount and direction of unwanted tooth movements despite upper bonded retainers as well as to analyze possible predisposing pretreatment- and treatment-related factors. Plaster casts of 1026 patients who completed orthodontic treatment and asubsequent retention phase of 2years were screened for unintentional tooth movements. The study group comprised 57patients with visually obvious tooth movements in the upper jaw, while 57randomly selected patients without visible tooth movements served as control group. For all patients, plaster casts after debonding of multibracket appliance (T1) and after supervised retention (T2) were digitized, and superimposed digitally using astable palatal reference area. Thereafter, translational and rotational movements were measured in all three planes of space. Pretreatment- and treatment-related factors of the study and control groups were compared by χ2 test, exact Fisher test, Mann-Whitney U test, and the T‑test for independent samples. The mean translational movements ranged between 0 and 0.6 mm and the average rotational movements between 0 and 1.3°. Large individual movements up to 2.7 mm translation and 15.9° rotation were seen. Amovement pattern around the Y‑ and Z‑axis with an opposite rotational peak at the canines ("upper twist effect") was identified. Compared to the control group, patients of the study group showed asignificantly smaller intercanine width pretreatment. Also, study group patients presented alarger intercanine expansion and aslightly larger overjet reduction during treatment, and were more often affected by retainer bonding site detachments and wire fractures, but without reaching statistically significance. Upper bonded retainers show asimilar unwanted movement pattern ("twist effect") like the one described for mandibular retainers.

Genetic and environmental impact on variation in the palatal dimensions in permanent dentition: a twin study.

The objective of this study was to assess the relative contributions of genetic and environmental factors to variation in palatal parameters in twins with completed maxillary growth. The subjects of this study comprised digital dental casts of 50 monozygotic and 35 dizygotic twin pairs. The subjects' average age was 17.95 ± 2.83years. Zygosity determination was carried out using 15 specific DNA markers and an amel fragment of the amelogenin gene. The interdental distances were measured between selected dental landmarks at the occlusal and gingival planes. The palatal height, surface area and volume were measured between the gingival plane and the midpalate suture. High heritability estimates were observed for all transverse intra-arch measurements. The palate height (a2 = 0.8), dental arch width in the molar area (a2 = 0.86), palatal surface area (a2 = 0.61) and palate volume (a2 = 0.69) were under strong additive genetic control. Moderate genetic dominance was observed for dental arch widths at the gingival line in the canine (d2 = 0.5) and premolar regions (d2 = 0.78-0.81). Sexual dimorphism was shown, with males exhibiting a greater arch width, palate surface area and volume than females (p < 0.01). The majority of palate parameters variation in twins was controlled by genetic effects, and most were highly heritable.

A case report: Cellular (Myoepithelial Rich) pleomorphic adenoma of hard palate: A diagnostic dilemma

Salivary gland tumors account for &amp;#60;3% of the head and neck tumors. Pleomorphic Adenoma is the most common salivary gland tumor which constitutes for about 60% of all major and minor salivary gland tumors. Among the minor salivary glands tumors, pleomorphic adenoma makes about 70% and the most common site in the oral cavity is the palatal area, followed by the lip, buccal mucosa, floor of mouth, tongue, tonsil, pharynx, retromolar trigone, and gingiva. Females are more commonly affected than males. Pleomorphic adenoma of the hard palate presents as a painless firm submucosal mass without tenderness, ulceration, or surrounding inflammation; usually lacking a well-defined capsule and frequently involves periosteum or bone.These tumors are located laterally, and they rarely cross the midline.

Reconstruction of Palatal Defects Using a Composite Chondromucosal Nasoseptal Flap and Comparative Analysis.

The use of composite chondromucosal nasal septal flaps (ccNSF) has been demonstrated to be effective in cadaveric studies for the anterior skull base and the orbit. However, their application in the clinical setting remains unexplored. Our study aims to introduce a new method for treating palatal defects using ccNSF. Additionally, we studied the average NSF area and compared it to the average palate area. We collected 108 CT scans from the medical records of patients without head and neck pathologies from a tertiary medical institution. We quantified the quadrangular (septal) cartilage and palate areas. Furthermore, we included a clinical case in which we used the ccNSF for the palatal defect reconstruction. This was to compare the mean area between the palate and the septal cartilage. The ccNSF covered the palatal defect without any significant complications for the first 9 months of follow-up. A total of 102 CT scans met the inclusion criteria and were measured. We found that the mean quadrangular cartilage had a length of 2.50 (±0.52) cm, a width of 2.28 (±0.51) cm, and an area of 5.43 (±1.68) cm2. The mean palate length was 2.73 (±0.44) cm, with a width of 3.13 (±0.34) cm, and area of 7.87 (±1.43) cm2. The ccNSF proved successful in palatal defect reconstruction, resulting in positive outcomes and no major complications until the 9-month follow-up. The ccNSF is a useful flap that avoids the use of free flap transfer and its associated morbidities. 4 Laryngoscope, 2024.

Efficacy of clear aligners vs rapid palatal expanders on palatal volume and surface area in mixed dentition patients: A randomized controlled trial

This study aimed to evaluate the efficacy of Invisalign First Phase I treatment compared with tooth-borne rapid maxillary expansion (RME) in mixed dentition patients by examining changes in palatal volume, palatal surface area, and maxillary interdental transverse measurements. In this open-label, 2-arm, parallel, randomized controlled trial, patients with a posterior transverse discrepancy≤6 mm were allocated into the clear aligner therapy (CAT) group (Invisalign First Phase I treatment) and RME group (tooth-borne RME) according to a computer-generated randomization list immediately before the start of treatment. Digital models were obtained before the beginning of the treatment (T0) and at the end of the retention period/treatment (T1) using an intraoral scanner. Palatal volume was measured as the primary outcome, and palatal surface area and intermolar and intercanine transverse widths at the cusps and gingival level were measured as secondary outcomes. Patients and interventionists were not blinded because of the nature of the intervention. Out of 50 patients, 41 (19 males and 22 females; mean age, 8.12 ± 1.53 years) were enrolled and divided into 2 groups: 20 in the CAT group and 21 in the RME group. Two participants did not receive the allocated intervention for different reasons (1 patient discontinued the intervention in the CAT group, and another patient was lost to follow-up in the RME group). Thus, 19 patients (5 males and 14 females; mean age, 8.48 ± 1.42 years) were analyzed from the CAT group, and 20 patients (12 males and 8 females; mean age, 7.83 ± 1.19 years) from the RME group. Regarding intragroup comparisons, all outcome measures significantly increased from T0 to T1 in both groups. In terms of intergroup comparisons, there were no significant differences in the variation (Δ) of outcome measures between the 2 groups from T0 to T1, except for the intermolar width at the gingival level (P<0.005). The change in palatal volume was 532.01 ±540.52 mm³ for the RME group and 243.95 ± 473.24 mm³ for the CAT group (P = 0.084), with a moderate effect size (d = 0.57). RME showed trends favoring better outcomes compared with Invisalign First Phase I treatment across all assessed measures. The only parameter that showed statistically significant differences between the 2 groups was variation in intermolar width at the gingival level, suggesting the occurrence of buccal tipping in patients undergoing Invisalign First Phase I treatment. The trial was registered at ClinicalTrial.gov (no. NCT04760535).

Palatal Graft Harvesting Site Healing and Pain Management: What Is the Best Choice? An Umbrella Review

The use of free gingival graft (FGG) and connective tissue graft (CTG) from the palate are among the most predictable periodontal and peri-implant plastic surgery procedures. However, palatal harvesting causes severe discomfort in the palatal area in patients undergoing harvesting. The aim of this umbrella review is to evaluate which products or techniques can result in fewer side effects and less morbidity in patients. Systematic reviews, with meta-analysis or not, about postoperative pain and wound healing in patients undergoing surgery to remove a free gingival graft or connective tissue graft from the palatal region, published only in the English language, were electronically searched for on BioMed Central, Scopus, MEDLINE/PubMed, the Cochrane library databases, and PROSPERO register. Of 1153 titles, only 7 articles were included in this review. The reviews included suggest that the more effective interventions for patient-reported outcomes, particularly for pain management, are cyanoacrylate adhesives, platelet-rich fibrin, hyaluronic acid, and the use of palatal stents. Low-level laser therapy also demonstrated good results in palatal wound healing speed after FGG procedures. Also, topical agents were also described. Future studies and more high-quality randomized clinical trials are needed to provide clear descriptions and standardized procedures of interventions to obtain clear results.

A Minimally Invasive Surgical Procedure to Harvest Palate Periosteum as a Source of Mesenchymal Stromal/Stem Cells for Bone Tissue Engineering.

The aim of this study is to validate a minimally invasive surgical procedure to harvest palate periosteum as a source of tissue for mesenchymal stromal/stem cells. We performed a standardized procedure to harvest the palate periosteum in ten subjects, which consisted of a 3 mm disposable punch and a Molt periosteal elevator to harvest a small full-thickness fragment of soft tissue at the hard palate area, between the upper bicuspids, 3 to 4 mm apical to the cement enamel junction. The one-third inner portion was fragmented, and following standard cell culture procedures, the adherent cells were cultured for three passages, after obtaining 70-90% confluence. Cell morphology analysis, flow cytometry analysis, and viability and osteogenic differentiation assays were performed. In all 10 cases, uneventful healing was observed, with no need for analgesic intake. The evaluation of cell morphology showed elongated spindle-shaped cells distributed in woven patterns. A high viability range was verified as well as an immunophenotype compatible with mesenchymal stem cell lineage. The differentiation assay showed the potential of the cells to differentiate into the osteogenic lineage. These results demonstrate that the minimally invasive proposed surgical technique is capable of supplying enough periosteum source tissue for stem cell culture and bone tissue engineering.

Histological assessment of a novel de-epithelialization method for connective tissue grafts harvested from the palate. An experimental study in cadavers

ObjectivesThis study aims to compare the histological outcomes of three distinct de-epithelialization methods used in (connective tissue grafts) CTG harvested from the palate.Materials and methodsAn experimental study using nine cadaver head specimens was carried out to compare 3 different de-epithelialization techniques for CTG. Eighteen samples were randomly allocated to three study groups: bone scraper, diamond bur and extraoral removal with a scalpel. The main outcome variable was the graft surface percentage without epithelium remains. Additionally, the time employed, and the graft thickness were also measured.ResultsSixteen CTGs were analyzed. The extraoral scalpel group presented a total surface area with no epithelium of 58.84% (22.68) and a mean de-epithelialization time of 3.7 min; the intraoral diamond bur group had 88.24% (41.3) of the surface with no epithelium and took 1.455 min, and the intraoral bone scraper showed 97.98% (5.99) of surface without epithelium and a mean time of 0.815 min (P < 0.05). Histological analysis showed significant differences between the bone scraper and the extraoral group (P = 0.009).ConclusionThe de-epithelialization technique with a bone scraper seems to be the most effective and fastest de-epithelialization technique for CTG. These findings need to be confirmed in future clinical studies with larger samples.Clinical relevanceThe use of bone scrapers, could be a simple, effective and fast technique to de-epithelialize connective tissue grafts harvested from the palatal area for both novice and experienced surgeons.

Evaluation of hard palate and cleft morphology in neonates with Pierre Robin Sequence and Cleft Palate Only.

This study aimed to establish a fully digital measurement protocol for standardizing the description of hard palate and cleft morphology in neonates with an isolated cleft palate (CPO) and Pierre Robin sequence (PRS). A total of 20 digitized plaster models of neonates with CPO and 20 digitized plaster models of neonates with PRS were retrospectively investigated. For the control group, the hard palate was segmented from 21 pre-existing 1.5 T MRI datasets of neonates and exported as an STL file. The digital models were marked with predefined reference points by three raters. Distance, angular, and area measurements were performed using Blender and MeshLab. Neonates with CPO (20.20 ± 2.33 mm) and PRS (21.41 ± 1.81 mm) had a significantly shorter hard palate than the control group (23.44 ± 2.24 mm) (CPO vs. control: P < .001; PRS vs. control: P = .014). Notably, neonates with PRS (33.05 ± 1.95 mm) demonstrated a significantly wider intertuberosity distance than those with CPO (30.52 ± 2.28 mm) (P = .012). Furthermore, there were also significant differences measured between the cleft and control groups (25.22 ± 2.50 mm) (P < .001). The data from this study demonstrate the feasibility of using MRI datasets to generate digital models of the hard palate. The presence of a cleft palate leads to pronounced adaptations of the total palatal surface area, dorsal width, and length of the hard palate. Mandibular retrognathia and altered tongue position in PRS, as opposed to CPO, might further impact palatal morphology and intertuberosity distance.

Immediate Placement and Loading of Maxillary Single-Tooth with Scalloped Shape Implants and Digitalized Customized Restoration: A 5-Year Prospective Study of Marginal Bone Level.

To evaluate, within a period of 5 years, the bone level in mesial, distal, palatal, and buccal areas around scalloped shape implants immediately placed and loaded with temporary crowns fixed on final prefabricated abutments, and also to evaluate the thickness of buccal bone. 18 implants were inserted and loaded immediately using computer-assisted design/computer-assisted manufacturing technology on 18 patients to replace single tooth in the esthetic part of the maxilla. The marginal bone level across the scalloped implant neck was measured mesially and distally using intraoral standardized radiographs after crown fixations and 1, 3, and 5 years later. Cone beam computed tomography para-axial cuts images were used to measure bone level buccally and palatally from the implant neck to the implant-to bone contact after 5 years of loading and to evaluate the thickness of the buccal bone at the implant neck and 4 mm apically, immediately after implant placement and 5 years later. All implants were assessed clinically and radiologically after 5 years. No implant failure was recorded, and the average marginal bone variation on mesial and distal sites was 0.114 ± 0.135 mm at crown cementation, 0.239 ± 0.158 mm 1 year later, 0.233 ± 0.182 mm 3 years later, and 0.180 ± 0.182 mm 5 years later. Our findings indicate that at T0, the average thickness of the buccal bone was 2.27 mm at implant neck M0 (ranging from 1.9 to 2.4) and 2.33 mm at 4 mm apically to the implant neck M1 (ranging from 1.9 mm to 2.9 mm). By T4, the mean had decreased to 1.94 mm at M0 (with a range of 1.7 mm to 2.3 mm) and 2.14 mm at M1 (with a range of 1.8 mm to 2.4 mm). After 5 years the mean changes at buccal and palatal bone for all implants were &#43;0.187 ± 0.52 mm and &#43;0.06 ± 0.38 mm respectively. Minor prosthetic problems were observed over the five years: incisal ceramic chipping occurred in two crowns, and two crowns were replaced for esthetic reasons after one year. No loosening of crowns or abutments was reported. Scalloped neck implants demonstrated a comparable behavior to regular neck implants with similar designs in an immediate implantation and temporization protocol over a five-year period.

Evaluating the influence of palate scanning on the accuracy of complete-arch digital impressions–An in vitro study

ObjectivesTo assess the impact of including the palate and the number of images recorded during intraoral digital scanning procedure on the accuracy of complete arch scans. MethodsAn experienced operator conducted 40 digital scans of a 3D printed maxillary model and divided them into two groups: 20 with inclusion of the palate (PAL) and 20 without (NPAL). Each set of scans was performed using an intraoral scanner (IOS) (Trios 5; 3Shape A/S; Copenhagen, Denmark). The resulting STL files were imported into the Geomagic Control X software (3D Systems, Rock Hill, SC, USA) for accuracy comparison. A reference STL file was created using a 3Shape E3 laboratory scanner (3Shape Scanlt Dental 2.2.1.0; Copenhagen, Denmark). The number of images captured was recorded during the scanning procedure. ResultsIn the case of the right side no statistically significant difference in trueness was detected (84 µm ± 45.6 for PAL and 80.4 ± 40.4 µm for NPAL). In the case of the left side no significant difference in trueness was observed (215.1 ± 70.2 µm for PAL and 233.9 ± 70.7 µm for NPAL). In the case of the arch distortion a statistically significant difference in trueness was seen between the two types of scans (135.3 ± 71.9 µm for PAL and 380.4 ± 255.1 µm for NPAL). The average number of images was 831.25, and 593.8 for PAL and NPAL, respectively. ConclusionsScanning of the palatal area can significantly improve the accuracy of dental scans in cases of complete arches. In terms of the number of images, based on the current results, obvious conclusions could not be drawn, and further investigation is required. Clinical significanceScanning the palate may be beneficial for improving the accuracy of intraoral scans in dentate patients. Consequently, this should be linked to an appropriate scanning strategy that predicts palatal scanning.

Evaluation of maxillary dimensional changes in the mixed dentition: clear aligners vs acrylic expanders.

To compare changes in upper arch dimension and molar inclination between Invisalign First (IF) and removable acrylic expander (RE) treatments during the mixed dentition period. Seventeen patients meeting inclusion criteria underwent IF treatment and were age matched with a group that received treatment with a removable acrylic expander (RE). Intercanine width (ICW), intermolar width, arch depth, buccolingual inclination of the first molars (MI), surface area (SA) and volume (VAP) of the anterior palate, and expansion were compared before and after treatment. The predictability of expansion was calculated for the IF group. Analysis of variance and Kruskal-Wallis tests were used to assess differences. The ICW increased significantly by 2.14 mm in the IF group and 3.49 mm in the RE group, with no significant intergroup difference. Both groups exhibited significant increases in intermolar width (P < .05), except for intermolar distopalatal width in the IF group (P = .246). Mesiobuccal rotation of the first molar was observed with IF treatment. Although SA and VAP increased in both groups, the changes were not significant for the IF group (P > .05). The RE group exhibited significantly higher increases (P < .05), with an SA increase of 34.32 mm2 and VAP increase of 119.15 mm3. MI changes were in the opposite directions. The prediction accuracy of expansion was 70.28% for canines and 34.12% for first molars. Both appliances effectively expanded the intercanine region in growing patients. Expansion predictability was lower in first molars than in canines for the IF group. Removable acrylic expanders could be a choice of preference for expansion targeted to the molar region.

Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study

ObjectivesTo evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances.Subjects and MethodsTwenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome.ResultsThe mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2–3 mm, distributed over the entire dental arches with no distinct pattern.ConclusionsThe accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

Palatal Morphology After Treatment of Children With Obstructive Sleep Apnoea Using the Modified Twin-Block Appliance

ObjectiveTo investigate changes in the upper maxillary palates of children with obstructive sleep apnoea (OSA) and mandibular retraction who were treated using modified twin-block appliances (MTBAs). MethodsThirty-five OSA children (age: 6-12 years) with mandibular retraction were included as the experimental group and 35 children who were Angle's class I but without mandibular retraction were included as the control group. The experimental group was treated with MTBA. Plaster models were made before the treatment and at the end of the 6-month treatment period. Plaster models of the control group were made at inclusion and after 6 months. Some plaster models were excluded because of damage or their failure to exhibit sufficiently clear marks, which left 26 pairs each for the experimental and control groups. The gender and age of the experimental group were matched with those of the control group at the end of the treatment. Three-dimensional (3D) digital model information was gathered using the external oral scanning model, and the data were extracted and analysed statistically to clarify the morphologic improvement in the maxillopalatine in OSA children treated using MTBAs. ResultsAfter the OSA children with mandibular retraction were treated with MTBAs, the maxillary intercusp width, intermolar width, anterior palate width, posterior palate width, and surface area and volume of the maxillary palate significantly increased (*P < .05). By contrast, the anterior palatal height–apex level (H3) significantly decreased (*P < .05). ConclusionsCompared with the control group, the narrow maxillary arch and basal bone were significantly enlarged after the OSA children with mandibular retraction were treated using MTBAs. The palatal surface area and volume increased, thereby allowing more space for accommodating the tongue and relieving transverse dissonance of the dentition.

Clinical efficacy and mechanism study of mid-frequency anti-snoring device in treating moderate obstructive sleep apnea-hypopnea syndrome.

Obstructive sleep apnea-hypopnea syndrome (OSAHS) is primarily caused by airway obstruction due to narrowing and blockage in the nasal and nasopharyngeal, oropharyngeal, soft palate, and tongue base areas. The mid-frequency anti-snoring device is a new technology based on sublingual nerve stimulation. Its principle is to improve the degree of oropharyngeal airway stenosis in OSAHS patients under mid-frequency wave stimulation. Nevertheless, there is a lack of clinical application and imaging evidence. To investigate the clinical efficacy and mechanisms of a mid-frequency anti-snoring device in treating moderate OSAHS. We selected 50 patients diagnosed with moderate OSAHS in our hospital between July 2022 and August 2023. They underwent a 4-wk treatment regimen involving the mid-frequency anti-snoring device during nighttime sleep. Following the treatment, we monitored and assessed the sleep apnea quality of life index and Epworth Sleepiness Scale scores. Additionally, we performed computed tomography scans of the oropharynx in the awake state, during snoring, and while using the mid-frequency anti-snoring device. Cross-sectional area measurements in different states were taken at the narrowest airway point in the soft palate posterior and retrolingual areas. Compared to pretreatment measurements, patients exhibited a significant reduction in the apnea-hypopnea index, the percentage of time with oxygen saturation below 90%, snoring frequency, and the duration of the most prolonged apnea event. The lowest oxygen saturation showed a notable increase, and both sleep apnea quality of life index and Epworth Sleepiness Scale scores improved. Oropharyngeal computed tomography scans revealed that in OSAHS patients cross-sectional areas of the oropharyngeal airway in the soft palate posterior area and retrolingual area decreased during snoring compared to the awake state. Conversely, during mid-frequency anti-snoring device treatment, these areas increased compared to snoring. The mid-frequency anti-snoring device demonstrates the potential to enhance various sleep parameters in patients with moderate OSAHS, thereby improving their quality of life and reducing daytime sleepiness. These therapeutic effects are attributed to the device's ability to ameliorate the narrowing of the oropharynx in OSAHS patients.

Improving the Retention of Maxillary Complete Denture: A Case Report

Complete dentures play an essential role in restoring oral function and improving the quality of life for individuals who have missing all their normal teeth. One of the key factors determining the success of complete dentures is their retention, which refers to the ability of dentures to stay securely in place during normal oral function. Adequate retention is essential for proper speech, mastication and overall comfort of the denture wearer. The study aimed to improve the retention of complete dentures through three different approaches: spacer, posterior palatal seal area, and undercut area. Three dentures were fabricated using the same steps, with variations in certain steps based on the retention technique being employed. The study showed that all three dentures had improved retention compared to standard complete dentures. The dentures that included the posterior palatal seal area and spacer demonstrated higher retention than the denture that employed the undercut technique. It is worth noting that the patient did not find the denture with the undercut technique satisfactorily.

Mucormycosis of left maxilla: A case report and review

Mucormycosis is an angioinvasive infection caused by fungi of the Zygomycetes order. Rhizopus is the main pathogen responsible for 90% of cases of cerebral mucormycosis. The term rhinocerebral mucormycosis should be used only in the face, palatal, orbital, paranasal sinus, or brain area. Here, we present the case of a 42-year-old man who presented with complaints of pain and swelling in relation to the left upper back tooth region for the past 20 days. In this case, the patient was immunocompromised due to type II diabetes, as well as COVID hospitalization. This case enlightens the investigation, as well as the management protocol followed by post-operative rehabilitation. Early diagnosis and prompt treatment can significantly reduce the morbidity and mortality of these deadly fungal infections.