Single-crystal Packing Research Articles

Thermally activated delayed fluorescence in a mechanically soft charge-transfer complex: role of the locally excited state.

Molecular design for thermally activated delayed fluorescence (TADF) necessitates precise molecular geometric requirements along with definite electronic states to ensure high intersystem crossing (ISC) rate and photoluminescence quantum yield (PLQY). Achieving all these requirements synchronously while maintaining ease of synthesis and scalability is still challenging. To circumvent this, our strategy of combining a crystal engineering approach with basic molecular quantum mechanical principles appears promising. A holistic, non-covalent approach for achieving efficient TADF in crystalline materials with distinct mechanical properties is highlighted here. Charge transfer (CT) co-crystals of two carbazole-derived donors (ETC and DTBC) with an acceptor (TFDCNB) molecule are elaborated as a proof-of-concept. Using temperature-dependent steady-state and time-resolved photoluminescence techniques, we prove the need for a donor-centric triplet state (3LE) to ensure efficient TADF. Such intermediate states guarantee a naturally forbidden, energetically uphill reverse intersystem crossing (RISC) process, which is paramount for effective TADF. A unique single-crystal packing feature with isolated D-A-D trimeric units ensured minimal non-radiative exciton loss, leading to a high PLQY and displaying interesting mechanical plastic bending behaviour. Thus, a comprehensive approach involving a non-covalent strategy to circumvent the conflicting requirements of a small effective singlet-triplet energy offset and a high oscillator strength for efficient TADF emitters is achieved here.

Tröger’s Base Based Triangular Macrocycles with a Nanoscale Cavity for Chirality-Dependent Packing in Single Crystals

Tröger’s Base Based Triangular Macrocycles with a Nanoscale Cavity for Chirality-Dependent Packing in Single Crystals

BN-Substitution in Dithienylpyrenes Prevents Excimer Formation in Solution and in the Solid State.

Boron–nitrogen substitutions in polycyclic aromatic hydrocarbons (PAHs) have a strong impact on the optical properties of the molecules due to a significantly more heterogeneous electron distribution. However, besides these single-molecule properties, the observed optical properties of PAHs critically depend on the degree of intermolecular interactions such as π–π-stacking, dipolar interactions, or the formation of dimers in the excited state. Pyrene is the most prominent example showing the latter as it exhibits a broadened and strongly bathochromically shifted emission band at high concentrations in solution compared to the respective monomers. In the solid state, the impact of intermolecular interactions is even higher as it determines the crystal packing crucially. In this work, a thiophene-flanked BN-pyrene (BNP) was synthesized and compared with its all-carbon analogue (CCP) in solution and in the solid state by means of crystallography, NMR spectroscopy, UV–vis spectroscopy, and photoluminescence (PL) spectroscopy. In solution, PL spectroscopy revealed the solvent-dependent presence of excimers of CCP at high concentrations. In contrast, no excimers were found in BNP. Clear differences were also observed in the single-crystal packing motifs. While CCP revealed overlapped pyrene planes with centroid distances in the range of classical π-stacking interactions, the BNP scaffolds were displaced and significantly more spatially separated.

Non-fullerene acceptors with hetero-dihalogenated terminals induce significant difference in single crystallography and enable binary organic solar cells with 17.5% efficiency

A synergistic hetero-dihalogenated terminals strategy was systematically employed for the first time to enhance single-crystal packing, boosting the device performance of a Y-BO-FCl:PM6 device with a remarkable PCE of 17.52%.

Relationship Between Molecular Structure, Single crystal Packing and Self-Assembly Behavior: A Case Based on Pyrene Imide Derivatives.

Development of new n-type one-dimensional (1D) self-assembly nanostructure and a clear understanding of the relationship between molecular structure and self-assembly behavior are important prerequisites for further designing and optimizing organic optoelectronic nanodevice. In this article, a series of n-type organic semiconductor materials based on pyrene imide were successfully synthesized through [4+2] cycloaddition reactions and their preliminary optical and electrochemical properties were studied. The simulated HOMO-LUMO bandgaps via DFT tallied with the experimental data well. The self-assembly of these materials showed needle or fiber-like morphologies, indicating that different conjugation degree or alkyl group had significant influence on their self-assembly behaviors. Furthermore, the single-crystal packing for these molecules were analyzed and it was found out that the changes of conjugated backbone and functional group would affect certain crystal lattice parameter significantly, such as the intermolecular packing distance and crystal size etc, which would further result in different self-assembly morphology.

Multifarious Impact of Rhodanine Acceptor Group on the Optical Properties of Some Semiconductor Probes

AbstractSteady state optical properties such as photo‐absorption and photo‐luminescence characteristics of organic molecules in its bulk states viz, film or crystalline forms are highly sensitive to subtle alteration of chemical substitution, molecular geometry in bulk and the electronic state coupling between a pair of molecules. Here we highlight a distinct interference of rhodanine substitution on such optical properties of a group of similar molecules (2TR, 23TR). For comparison an anthracene conjugate model molecule was also chosen (AR). In the former case, despite of having similar molecular structure except the presence of a methyl group at the C3 position (which ensures the identical electronic states in both the case) and similar molecular packing in single crystals, 2TR and 23TR exhibited diagonally opposite solid‐state fluorescence behavior. 2TR was non‐fluorescent whereas, 23TR was highly emissive in its crystalline solid state. A minute substitutional change in chemical structure was found to alter the solid‐state fluorescence behavior immensely that was attributed to the non‐radiative loss in the former case due to the solid‐state C−C bond flip which was further proven by temperature dependent fluorescence experiments. At a sample temperature of <120 K, 20‐fold enhancement in the fluorescence intensity was observed.

A Synergistic Strategy of Manipulating the Number of Selenophene Units and Dissymmetric Central Core of Small Molecular Acceptors Enables Polymer Solar Cells with 17.5 % Efficiency.

A dissymmetric backbone and selenophene substitution on the central core was used for the synthesis of symmetric or dissymmetric A-DA'D-A type non-fullerene small molecular acceptors (NF-SMAs) with different numbers of selenophene. From S-YSS-Cl to A-WSSe-Cl and to S-WSeSe-Cl, a gradually red-shifted absorption and a gradually larger electron mobility and crystallinity in neat thin film was observed. A-WSSe-Cl and S-WSeSe-Cl exhibit stronger and tighter intermolecular π-π stacking interactions, extra S⋅⋅⋅N non-covalent intermolecular interactions from central benzothiadiazole, better ordered 3D interpenetrating charge-transfer networks in comparison with thiophene-based S-YSS-Cl. The dissymmetric A-WSSe-Cl-based device has a PCE of 17.51 %, which is the highest value for selenophene-based NF-SMAs in binary polymer solar cells. The combination of dissymmetric core and precise replacement of selenophene on the central core is effective to improve Jsc and FF without sacrificing Voc .

Even–Odd Alkyl Chain-Length Alternation Regulates Oligothiophene Crystal Structure

Alkyl chains of varied length and steric bulk are generally appended to π-conjugated chromophores to increase solubility. These alkyl chains also regulate many aspects of the solid-state packing and, in turn, resultant electronic and optical properties of organic semiconductors, yet there remains little understanding as to how these moieties govern such characteristics. Here, we report on a series of (2,5-bis(3-alkylthiophen-2-yl) thieno[3,2-b]thiophenes) (BTTT) monomers where the single-crystal packing configurations and melting points alternate as a function of whether the alkyl side chains have an even or odd number of carbon atoms. When the alkyl chains contain an even number of carbon atoms, the molecules predominantly crystallize with the BTTT units of the stacked lamellae aligned in the same direction. In contrast, when the number of carbon atoms is odd, alternating lamellae are twisted with respect to their neighbors, i.e. the BTTT moieties in one layer are aligned in an orthogonal-like fashion to those in its neighboring lamellae, and the crystal melting points tend to be higher than those with the even-numbered alkyl chains. With density functional theory calculations and geometric analyses, the variations in crystal structure and thus the differences in physical properties are rationalized by an oscillating interlayer interaction that is a function of alkyl side chain atom count and length. This study characterizes an extreme case of an organic semiconductor crystal packing alternation to highlight the effect of even–odd assembly as an underutilized and under-reported handle for tuning the molecular packing of organic semiconductor materials.

Fluorination Effects on Indacenodithienothiophene Acceptor Packing and Electronic Structure, End-Group Redistribution, and Solar Cell Photovoltaic Response.

Indacenodithienothiophene (IDTT)-based postfullerene electron acceptors, such as ITIC (2,2'-[[6,6,12,12-tetrakis(4-hexylphenyl)-6,12-dihydrodithieno[2,3- d:2',3'- d']-s-indaceno[1,2- b:5,6- b']dithiophene-2,8-diyl]-bis[methylidyne(3-oxo-1 H-indene-2,1(3 H)-diylidene)]]bis[propanedinitrile]), have become synonymous with high power conversion efficiencies (PCEs) in bulk heterojunction (BHJ) polymer solar cells (PSCs). Here we systematically investigate the influence of end-group fluorination density and positioning on the physicochemical properties, single-crystal packing, end-group redistribution propensity, and BHJ photovoltaic performance of a series of ITIC variants, ITIC- nF ( n = 0, 2, 3, 4, and 6). Increasing n from 0 → 6 contracts the optical bandgap, but only marginally lowers the LUMO for n > 4. This yields enhanced photovoltaic short-circuit current density and good open-circuit voltage, so that ITIC-6F achieves the highest PCE of the series, approaching 12% in blends with the PBDB-TF donor polymer. Single-crystal diffraction reveals that the ITIC- nF molecules cofacially interleave with ITIC-6F having the shortest π-π distance of 3.28 Å. This feature together with ZINDO-level computed intermolecular electronic coupling integrals as high as 57 meV, and B3LYP/DZP-level reorganization energies as low as 147 meV, rival or surpass the corresponding values for fullerenes, ITIC-0F, and ITIC-4F, and track a positive correlation between the ITIC- nF space-charge limited electron mobility and n. Finally, a heretofore unrecognized solution-phase redistribution process between the 2-(3-oxo-indan-1-ylidene)-malononitrile-derived end-groups (EGs) of IDTT-based NFAs, i.e., EG1-IDTT-EG1 + EG2-IDTT-EG2 ⇌ 2 EG1-IDTT-EG2, with implications for the entire ITIC PSC field, is identified and mechanistically characterized, and the effects on PSC performance are assessed.

Synthesis, structure and antiproliferative and optical activities of two new biphenyl-derived Schiff bases.

Two novel Schiff bases derived from indole and biphenyl have been designed and synthesized, namely 3-((E)-{(E)-[1-(biphenyl-4-yl)ethylidene]hydrazinylidene}methyl)-1-methyl-1H-indole (3-BEHMI) acetonitrile monosolvate, C24H21N3·CH3CN, and 3-((E)-{(E)-[1-(biphenyl-4-yl)ethylidene]hydrazinylidene}methyl)-1-methyl-1H-indole (3-BEHEI) acetonitrile monosolvate, C24H21N3·CH3CN. Their structures were characterized by elemental analysis, quadrupole time-of-flight MS, NMR and UV-Vis spectroscopy. The single-crystal packing structure of 3-BEHMI is largely dominated by C-H...π interactions and weak van der Waals interactions. The in vitro cytotoxicity of the two title compounds have been evaluated against two tumour cell lines (A549 human lung cancer and 4T1 mouse breast cancer) and two normal cell lines (MRC-5 normal lung cells and NIH 3T3 fibroblasts) by MTT assay. The results indicate that 3-BEHEI exhibits a slightly weaker antiproliferative capability (IC50 = ∼50 µM) than the previously reported similar Schiff base 3-BEHI (IC50= ∼20 µM). This is in line with docking results. 3-BEHMI demonstrates a weak cytotoxic activity, with IC50 values around 110 µM, which disagrees with its docking results. Overall, the tested compounds manifest relevant cytotoxicities on the selected cancer cell lines and normal cell lines. The UV-Vis and fluorescence spectra were recorded and reproduced through the TD-DFT method with four types of hybrid density functionals, including B3LYP, M062X, PBE1PBE and WB97XD.

Triindolo-Truxene Derivatives: Design, Synthesis, and Fine-Tuning of Electronic Properties and Molecular Assembly through Molecular Engineering.

Triindolo-truxene, a C3 -symmetric molecule with a large π-conjugated plane, has six methylene carbon atoms and three aromatic carbon atoms that can be facilely functionalized. Herein, butyl, carbonyl, cyano, and/or malononitrile groups were introduced at six methylene carbon atoms (6-, 14-, 22- or 8-, 16-, 24-positions) and/or three aromatic carbon atoms (2-, 10-, and 18-positions) of triindolo-truxene to produce eight derivatives. Their photophysical properties, electrochemical properties, and molecular assembly can be effectively modulated by substituents and substitution patterns. Incorporation of electron-deficient groups led to redshifts in both the absorption and emission of these derivatives and also lowered their HOMO and LUMO levels. Different substitution patterns resulted in the different intramolecular donor-acceptor interactions. Electron-deficient substituents at the methylene carbon atoms in the 6-, 14-, and 22-positions led to intramolecular charge transfer from the fluorene arms to the truxene core, whereas the corresponding substitutions at the methylene carbon atoms in the 8-, 16-, and 24-positions resulted in intramolecular charge transfer from the truxene core to the fluorene arms. The molecular packing in single crystals and molecular aggregation in solution are also influenced by the substituents and substitution patterns. This work provides a straightforward strategy to alter the properties of triindolo-truxene.

Complementary Hydrogen Bonding Modulates Electronic Properties and Controls Self-Assembly of Donor/Acceptor Semiconductors.

A comprehensive investigation of the complementary H-bonding-mediated self-assembly between dipyrrolo[2,3-b:3',2'-e]pyridine (P2P) electron donors and naphthalenediimide/perylenediimide (NDI/PDI) acceptors is reported. The synthesis of parent P2P and several aryl-substituted derivatives is described, along with their optical, redox, and single-crystal packing characteristics. The dual functionality of heteroatoms in the P2P/NDI(PDI) assembly, which act as proton donors/acceptors and also contribute to π-conjugation, leads to H-bonding-induced perturbation of electronic levels. Concentration-dependent NMR and UV/Vis spectroscopic studies revealed a cooperative effect of H-bonding and π-π stacking interactions. This H-bonding-mediated co-assembly of donor (D) and acceptor (A) components leads to a new charge-transfer (CT) absorption that can be controlled throughout the visible range. The electronic interactions between D and A were further investigated by time-dependent DFT, which provided insights into the nature of the CT transition. Electropolymerization of difuryl-P2P afforded the first conjugated polymer incorporating H-bonding recognition units in its main chain.

Fine-Tuning of Crystal Packing and Charge Transport Properties of BDOPV Derivatives through Fluorine Substitution.

Molecular packing in organic single crystals greatly influences their charge transport properties but can hardly be predicted and designed because of the complex intermolecular interactions. In this work, we have realized systematic fine-tuning of the single-crystal molecular packing of five benzodifurandione-based oligo(p-phenylenevinylene) (BDOPV)-based small molecules through incorporation of electronegative fluorine atoms on the BDOPV backbone. While these molecules all exhibit similar column stacking configurations in their single crystals, the intermolecular displacements and distances can be substantially modified by tuning of the amounts and/or the positions of the substituent fluorine atoms. Density functional theory calculations showed that the subtle differences in charge distribution or electrostatic potential induced by different fluorine substitutions play an important role in regulating the molecular packing of the BDOPV compounds. Consequently, the electronic couplings for electron transfer can vary from 71 meV in a slipped stack to 201 meV in a nearly cofacial antiparallel stack, leading to an increase in the electron mobility of the BDOPV derivatives from 2.6 to 12.6 cm(2) V(-1) s(-1). The electron mobility of the five molecules did not show a good correlation with the LUMO levels, indicating that the distinct difference in charge transport properties is a result of the molecular packing. Our work not only provides a series of high-electron-mobility organic semiconductors but also demonstrates that fluorination is an effective approach for fine-tuning of single-crystal packing modes beyond simply lowering the molecular energy levels.

A Cofacially Stacked Electron-Deficient Small Molecule with a High Electron Mobility of over 10 cm(2) V(-1) s(-1) in Air.

A strong, electron-deficient small molecule, F4 -BDOPV, has a lowest unoccupied molecular orbital (LUMO) level down to -4.44 eV and exhibits cofacial packing in single crystals. These features provide F4 -BDOPV with good ambient stability and large charge-transfer integrals for electrons, leading to a high electron mobility of up to 12.6 cm(2) V(-1) s(-1) in air.

Influence of Solid-State Packing of Dipolar Merocyanine Dyes on Transistor and Solar Cell Performances.

A series of nine dipolar merocyanine dyes has been studied as organic semiconductors in transistors and solar cells. These dyes exhibited single-crystal packing motifs with different dimensional ordering, which can be correlated to the performance of the studied devices. Hereby, the long-range ordering of the dyes in staircase-like slipped stacks with J-type excitonic coupling favors charge transport and improves solar cell performance. The different morphologies of transistor thin films and solar cell active layers were investigated by UV-vis, AFM, and XRD experiments. Selenium-containing donor-acceptor (D-A) dimethine dye 4 showed the highest hole mobility of 0.08 cm(2) V(-1) s(-1). BHJ solar cells based on dye 4 were optimized by taking advantage of the high crystallinity of the donor material and afforded a PCE of up to 6.2%.

Dipolar Quinoidal Acene Analogues as Stable Isoelectronic Structures of Pentacene and Nonacene.

Quinoidal thia-acene analogues, as the respective isoelectronic structures of pentacene and nonacene, were synthesized and an unusual 1,2-sulfur migration was observed during the Friedel-Crafts alkylation reaction. The analogues display a closed-shell quinoidal structure in the ground state with a distinctive dipolar character. In contrast to their acene isoelectronic structures, both compounds are stable because of the existence of more aromatic sextet rings, a dipolar character, and kinetic blocking. They exhibit unique packing in single crystals resulting from balanced dipole-dipole and [C-H⋅⋅⋅π]/[C-H⋅⋅⋅S] interactions.

Dipolar Quinoidal Acene Analogues as Stable Isoelectronic Structures of Pentacene and Nonacene

AbstractQuinoidal thia‐acene analogues, as the respective isoelectronic structures of pentacene and nonacene, were synthesized and an unusual 1,2‐sulfur migration was observed during the Friedel–Crafts alkylation reaction. The analogues display a closed‐shell quinoidal structure in the ground state with a distinctive dipolar character. In contrast to their acene isoelectronic structures, both compounds are stable because of the existence of more aromatic sextet rings, a dipolar character, and kinetic blocking. They exhibit unique packing in single crystals resulting from balanced dipole–dipole and [CH⋅⋅⋅π]/[CH⋅⋅⋅S] interactions.

Oligotriarylamines with a pyrene core: a multicenter strategy for enhancing radical cation and dication stability and tuning spin distribution.

Monoamine 1, diamines 2-4, triamine 5, and tetraamine 6 have been synthesized by substituting dianisylamino groups at the 1-, 3-, 6-, and/or 8-positions of pyrene. Diamines 2-4 differ in the positions of the amine substituents. No pyrene-pyrene interactions are evident in the single-crystal packing of 3, 4, and 6. With increasing numbers of amine substituents, the first oxidation potential decreases progressively from the mono- to the tetraamine. These compounds show intense charge-transfer (CT) emission in CH2 Cl2 at around 530 nm with quantum yields of 48-68 %. Upon stepwise oxidation by electrolysis or chemical oxidation, these compounds were transformed into radical cations 1(⋅+) -6(⋅+) and dications 2(2+) -6(2+) , which feature strong visible and near-infrared absorptions. Time-dependent density functional theory studies suggested the presence of localized transitions from the pyrene radical cation and aminium radical cation, intervalence CT, and CT between the pyrene and amine moieties. Spectroscopic studies indicated that these radical cations and dications have good stability. Triamine 5 and tetraamine 6 formed efficient CT complexes with tetracyanoquinodimethane in solution. The results of EPR spectroscopy and density functional theory calculations suggested that the dications 2(2+) -4(2+) have a triplet ground state, whereas 5(2+) and 6(2+) have a singlet ground state. The dication of 1,3-disubstituted diamine 4 exhibits a strong EPR signal.

Crystallinity and morphology effects on a solvent-processed solar cell using a triarylamine-substituted squaraine.

2,4-Bis[4'-(N,N-di(4″-hydroxyphenyl)amino)-2',6'-dihydroxyphenyl]squaraine (Sq-TAA-OH, optical bandgap 1.4 eV, HOMO level -5.3 eV by ultraviolet photoelectron spectroscopy) is used as an active layer material in solution processed, bulk-heterojunction organic photovoltaic cells with configuration ITO/PEDOT:PSS/Sq-TAA-OH:PC71BM/LiF/Al. Power conversion efficiencies (PCEs) up to 4.8% are obtained by a well-reproducible procedure using a mixture of good and poor Sq-TAA-OH solubilizing organic solvents, with diiodooctane (DIO) additive to make a bulk heterojunction layer, followed by thermal annealing, to give optimized V(OC) = 0.84-0.86 V, J(SC) = 10 mA cm(-2), and FF = 0.53. X-ray diffraction and scattering studies of pristine, pure Sq-TAA-OH solution-cast films show d-spacing features similar to single-crystal packing and spacing. The DIO additive in a good solvent/poor solvent mixture apparently broadens the size distribution of Sq-TAA-OH crystallites in pristine films, but thermal annealing provides a narrower size distribution. Direct X-ray diffraction and scattering morphological studies of "as-fabricated" active layers show improved Sq-TAA-OH/PC71BM phase separation and formation of crystallites, ∼48 nm in size, under conditions that give the best PCE.

Phase-Separation-Induced Single-Crystal Morphology in Poly(l-lactic acid) Blended with Poly(1,4-butylene adipate) at Specific Composition

The single-crystal morphology of poly(L-lactic acid) (PLLA) in blending with poly(butylene adipate) (PBA) in PLLA/PBA blends was for the first time reported in melt crystallization. At crystallization temperature (T(c)) = 110 °C, by adding 30 wt % PBA into PLLA, the lamellae exhibit six-stalk dendrites with single-crystal packing. Phase separation and crystallization took place simultaneously at T(c) = 110 °C in PLLA/PBA (70/30) blend, leading to discrete PBA domains and continuous PLLA domains. For PLLA/PBA (70/30) blend, all PBA were rejected from the growth front of PLLA crystals, expelled, and crystallized at ambient temperature as ring-banded PBA spherulites inside the discrete domains only, resulting in a favorable environment for formation of PLLA single crystals in the continuous domain. Atomic force microscopy (AFM) observation on individual crystallites reveals that lozenge-shaped single crystals were packed with a clockwise spiral pattern, stacked in 1-3 layers, and these lozenge-shaped crystals are aligned six hexasected directions into hexastalk dendrites with occasional side branches that are also aligned at 60° to main branches. The monolamellar thickness of lozenge-shaped single crystals was measured to be about 13-34 nm, and the dimension is about 0.8-3 μm along the short axis and 1.6-5 μm along the long axis. Typically, three layers of single crystals are stacked one on another; the lozenge crystals on the bottom layer are about twice as large as those on the top layer, forming a pyramid shape in the depth direction. Formation mechanisms of single crystals in melt-crystallized PLLA/PBA blend from 700 nm film thickness are discussed in correlation with exact phase separation at 30 wt % PBA.