Pacific-North America Plate Boundary Research Articles

Late Miocene transition from extension to dextral transtension in the southern Coastal Sonora fault zone, Gulf of California rift, Mexico

The Coastal Sonora fault zone (CSFZ) in northwestern Mexico records the Pacific–North America plate boundary reorganization during the Miocene from subduction to a transform boundary. This study presents the structural architecture of the Sierra El Aguaje-San Carlos-Guaymas region along the southern part of the CSFZ. The study area shows a complex fault pattern divided into four tectonic domains: ENE–WSW left-lateral, normal, and oblique faults in the Sierra El Aguaje and Cerro El Vigía domains and N–S domino-type normal faults in the El Parral and San Carlos domains, which are separated by the NW-striking dextral San Carlos fault. Based on a new fault-slip dataset and K-Ar ages, we propose a structural evolution model in which deformation progressively evolved from extension to dextral transtension. The deformation history involved ∼E–W pure extension associated with N–S normal faults from ∼15.3 Ma to ∼11–10 Ma, followed by transtension and the development of strike-slip faults after ∼11–10 Ma. That change induced the reactivation of preexisting faults and local strain partitioning between normal, oblique, and strike-slip faults. Transtension became strike-slip dominated during the latest Miocene and the Pliocene, accumulating ∼8 km of post-6.3 Ma dextral slip along the San Carlos fault. Paleostress analysis demonstrates that during the extensional phase, σ2 and σ3 were horizontal and oriented ∼N–S and ∼E–W, respectively. The transition to transtension required that σ2 reached the lithostatic stress value, its magnitude approached σ1, and its orientation remained ∼N–S. These conditions implied a horizontal tectonic force directed towards the north began after ∼11–10 Ma in northwestern Mexico. We propose that this new stress regime was related to the end of the Farallon–North America convergence and the inception of the Gulf of California oblique rifting with σ1 oriented N–S.

Evolution of Miocene normal and dextral faulting in the lower Colorado River region near Blythe, California, USA

Abstract The evolution of strain in nascent continental plate boundaries commonly involves distributed deformation and transitions between different styles of deformation as the plate boundary matures. Distributed NW-striking faults, many with km-scale right-lateral separation, are prevalent near Blythe, California, and have been variably interpreted to have accommodated either Middle Miocene NE-SW extension as normal faults or Late Miocene to Pliocene dextral shear as strike-slip faults. However, with poor timing and kinematic constraints, it is unclear how these faults relate to known domains of Neogene deformation and the evolution of the Pacific–NorthAmerica plate boundary. We present kinematic data (n = 642 fault planes, n = 512 slickenlines) that demonstrate that these faults dominantly dip steeply northeast; ~96% of measured faults record normal, dextral, or oblique dextral-normal kinematics that likely reflect a gradational transition between normal and dextral oblique kinematic regimes. We constrain fault timing with 11.7 Ma and 7.0 Ma 40Ar/39Ar dates of rocks cut by faults, and laser ablation–inductively coupled plasma–mass spectrometry U-Pb dating of calcite mineralized during oblique dextral faulting that demonstrates fault slip at ca. 10–7 Ma and perhaps as late as ca. 4 Ma. This Late Miocene dextral oblique faulting is best compatible with a documented regional transition from Early to Middle Miocene NE-directed extension during detachment fault slip to subsequent NW-directed dextral shear. We estimate 11–38 km of cumulative dextral slip occurred across a 50-km-wide zone from the Palen to Riverside mountains, including up to 20 km of newly documented dextral shear that may partly alleviate the regional discrepancy of cumulative dextral shear along this part of the Late Miocene Pacific–North America plate boundary.

Cenozoic slip along the southern Sierra Nevada normal fault, California (USA): A long-lived stable western boundary of the Basin and Range

AbstractThe uplift history of the Sierra Nevada, California, is a topic of long-standing disagreement with much of it centered on the timing and nature of slip along the range-bounding normal fault along the east flank of the southern Sierra Nevada. The history of normal fault slip is important for characterizing the uplift history of the Sierra Nevada, as well as for characterizing the geologic and geodynamic factors that drove, and continue to drive, normal faulting. To address these issues, we completed new structural studies and extensive apatite (U-Th)/He (AHe) thermochronometry on samples collected from three vertical transects in the footwall to the east-dipping southern Sierra Nevada normal fault (SNNF). Our structural studies on bedrock fault planes show that the SNNF is a steeply (~70°) east-dipping normal fault. The new AHe data reveal two elevation-invariant AHe age arrays, indicative of two distinct periods of cooling and exhumation, which we interpret as initiation of normal faulting along the SNNF at ca. 28–27 Ma with a second phase of normal faulting at ca. 17–13 Ma. We argue that beginning in the late Oligocene, the SNNF marked the now long-standing stable western limit, or breakaway zone, of the Basin and Range. Slip along SNNF, and the associated unloading of the footwall, likely resulted in two periods of uplift of Sierra Nevada during the late Cenozoic. Trench retreat, driven by westward motion of the North American plate, along the Farallon–North American subduction zone boundary, as well as the gravitationally unstable northern and southern Basin and Range pushing on the cold Sierra Nevada, likely drove the late Oligoceneaged normal slip along the SNNF and the similar-aged but generally local and minor extension within the Basin and Range. We posit that the thick proto–Basin and Range lithosphere was primed for late Oligocene extension by replacement of the steepening Farallon slab with hot and buoyant asthenosphere. While steepening of the Farallon slab had not yet reached the southern Sierra Nevada by late Oligocene time, we speculate that late Oligocene slip along the SNNF reactivated a late Cretaceous dextral shear zone as the Sierra Nevada block was pulled and pushed westward in response to trench retreat and gravitational potential energy. The dominant middle Miocene normal faultslip history along the SNNF is contemporaneous with high-magnitude slip recorded along range-bounding normal faults across the Basin and Range, including the east-adjacent Inyo and White mountains, indicating that this period of extension was a major regional tectonic event. We infer that a combination of slabdriven trench retreat along the Juan de Fuca–North America subduction zone boundary and clockwise rotation of the southern ancestral Cascade Range superimposed on continental lithosphere preconditioned for extension drove this episode of middle Miocene normal slip along the SNNF and extension to the east across the Basin and Range. Transtensional plate motion along the Pacific–North America plate boundary, and likely a growing slab window, continued to drive extension along the SNNF and the western Basin and Range, but not until ca. 11 Ma when the Mendocino triple junction reached the latitude of our northernmost (U-Th)/He transect.

Seismicity in a weak crust: the transtensional tectonics of the Brawley Seismic Zone section of the Pacific–North America Plate Boundary in Southern California, USA

SUMMARYThe Brawley Seismic Zone (BSZ) is a ∼58-km-long section of the Pacific–North America Plate boundary that connects the southernmost San Andreas Fault (SAF) and the Imperial Fault in southern California. We analyse the BSZ as two segments: a north segment, dominated by SAF tectonics, and a south segment that accommodates a higher level of seismicity. The south segment includes a ∼6 km wide right lateral step-over that includes the Salton Sea geothermal field (SSGF) and Holocene subaerial lava domes at the south end of the Salton Sea, called Salton Buttes. In general, the 40 yr (1981–2021) of BSZ seismicity is characterized by transitory sequences that often are accommodated simultaneously or in quick succession on intricate ladder-like faults. These sequences rarely reactivate faults associated with previous seismicity alignments but rather activate adjacent faults, sometimes located within less than 1 km. They can include several events of similar size as the mainshock, followed by bursts of aftershocks sometimes located away from the mainshock rupture. The seismicity rate and the spatial geometrical complexity varies between the BSZ-north and BSZ-south segments. The 24-km-long BSZ-north accommodates a ∼12-km-long linear trend of seismicity that extends from the SAF terminus into the Salton Sea, where moderate-sized northeast striking sequences form the rungs in a ladder-structure in a weak crust. The seismicity in this area is most likely influenced by the stress state of the SAF. In contrast, the 34 km long BSZ-south segment, which also has a weak crust, has accommodated larger sequences that illuminate irregular ladder-type faulting, with aftershocks defining linear distributions striking either north or northeast. The focal mechanisms exhibit a mostly strike-slip style of faulting with minor dip-slip faulting in the south Salton Sea area as well as the Mesquite basin to the south. The state of stress, as determined from focal mechanisms, consists of almost horizontal σ1, and σ3 with vertical σ2. The activation angle between the trend of σ1 and the preferred nodal plane of the largest nearby event decreases systematically from north to south along the long-axis of the BSZ. In the step-over zone, the Holocene volcanism and the frequent seismicity sequences suggest crustal extension as well as associated reduced crustal strength as compared to other parts of the BSZ. The presence of weak, thin, hot crust and distributed ladder-like or conjugate predominantly strike-slip faulting suggests that the whole BSZ acts as a several kilometre wide fault zone where no prominent principal slip surfaces are required to accommodate moderate-sized (M6+) earthquakes.

Isla San Pedro Nolasco as a Late Miocene intrusive record at the eastern margin of the Gulf of California: Insights from geological, geochemical and geochronological studies

Isla San Pedro Nolasco (ISPN) is a structural high bounded by inactive dextral oblique-slip faults in the east-central part of the Gulf of California rift zone and is composed of intrusive rocks not exposed on other Gulf of California islands. Here we present the reconnaissance results from geological mapping, as well as first geochemical and geochronological data for the ISPN intrusive complex. The intrusive rocks compose a sheet-like body of intermediate and felsic composition intruded by an intermediate and acidic dike swarm. All intrusive rocks (host and dikes) range in age from ca. 9 Ma to 10 Ma (40Ar/39Ar) and show a hydrous ferromagnesian mineral association (amphibole and biotite) with a calc-alkalic and transitional affinity. This hydrated mineralogical association has not been recognized in the coeval rocks along the onshore western margin of the North American plate (coastal Sonora). However, such hydrous mineralogical association is found in the coeval rift transitional volcanic rocks from the Baja California Microplate at Santa Rosalía and Bahía de Los Ángeles – Bahía de Las Ánimas. The ISPN continental block, at least 40 km long, has been pulled apart by transtensional faulting of the late Miocene Gulf of California shear zone before the westward migration of the North America-Pacific plate boundary at ca. 3–2 Ma. Eventually, ISPN became isolated as an island during the late Miocene flooding of the Gulf of California seaway.

Quaternary basaltic volcanic fields of the American Southwest

AbstractThe southwestern United States contains numerous monogenetic basaltic volcanoes distributed in intraplate volcanic fields. We review, on a regional scale, our current understanding of the Quaternary basalts with a focus on aspects pertinent to hazard assessment, such as physical volcanology and geochronology, while also summarizing the several petrogenetic conceptual models that have been proposed for the range of local tectonic settings in the region. We count 2229 volcanoes in 37 volcanic fields (including the Pinacate volcanic field, which is mostly in northern Sonora, Mexico). Volcanic landforms are dominantly scoria cones and ramparts with attendant lava fields that have a spectrum of ‘a'ā and blocky to pāhoehoe morphologies, while a small percentage of the volcanoes are maars and tuff cones. Explosive eruption styles that were driven mainly by magmatic volatiles, where they have been studied in detail, included Hawaiian, Strombolian, violent Strombolian, and sub-Plinian activity. The latter two have resulted in substantial fallout deposits that can be traced tens of kilometers from source vents. Phreatomagmatic styles have produced pyroclastic current (mainly pyroclastic surges), ballistic, and fallout deposits. These eruption styles pose hazards to humans when they occur in populated areas and to air travel and regional infrastructure even in sparsely populated areas. All but one of the major volcanic fields (fields that contain ∼100 or more Quaternary volcanoes) together form a northwest-southeast–trending band, which we suggest may reflect an influence of plate-boundary-related shearing on melt segregation in the upper mantle along with other factors; this view is consistent with recent global positioning system (GPS) and structural geologic data indicating the influence of dextral motion along the North America-Pacific plate boundary deep inside the Southwest. Of the 2229 Quaternary volcanoes identified, ∼548 (25%) have been dated, and only ∼15% have been dated with methods such as 40Ar/39Ar and cosmogenic surface exposure methods that are considered optimal for young basalts. Acknowledging the large uncertainty due to the poor geochronological data coverage, we use a simple Poisson model to provide a first-order estimate of recurrence rates of monogenetic volcanoes on the scale of the region as a whole; recurrence rates using our compiled age data set range from 3.74 × 10−4 yr−1 to 8.63 × 10−4 yr−1. These values are only based on dated and mapped volcanoes, respectively, and do not account for undated and buried volcanoes or other uncertainties in the volcano count. The time between monogenetic eruptions in the Southwest is similar to the repose times of some polygenetic volcanoes, which suggests that the regional hazard is potentially commensurate with the hazard from a reawakening stratovolcano such as those in the Cascade Range. Notable in our review is that only a few volcanoes have been the subject of physical volcanological characterization, interpretation, and detailed petrologic study that may elucidate factors such as magma generation, ascent (including time scales), and controls on eruption style.

Evidence for asthenospheric flow rotation in northwest Canada: insights from shear wave splitting

SUMMARYThe Mackenzie Mountains (MM) of northwest Canada are an actively uplifting, seismogenic salient of the northern Canadian Cordillera that lie 750 km NE of the main Pacific–North America plate boundary. We present new shear wave splitting measurements from a linear array transecting the region to characterize upper-mantle anisotropy and the relative role of the lithosphere and asthenosphere in MM uplift. A gradual rotation in anisotropy occurs across the Canadian Cordillera, with stations nearest to the craton yielding NE fast-axis orientations that are subparallel to North America absolute plate motion (∼230°). Moving SW from the craton, across the MM and towards the plate boundary, fast-axis orientations rotate to become aligned with major lithospheric fabrics (NW–SE). Previous work has shown that the Cordilleran lithosphere is thin (≈50 km) in this region. We therefore interpret these results to primarily reflect sublithospheric flow. Three possibilities for asthenospheric flow are presented, but none of them fit the data well. Therefore, we believe that flow in the SW is due to upwelling from the slab window that opened up around 45–25 Ma, although it is possible the lithosphere is more than 50 km in thickness, in which case these splits reflect the tectonic fabric of the region.

Ambient noise Love wave attenuation tomography for the LASSIE array across the Los Angeles basin.

The Los Angeles basin is located within the North America-Pacific plate boundary and contains multiple earthquake faults that threaten greater Los Angeles. Seismic attenuation tomography has the potential to provide important constraints on wave propagation in the basin and to provide supplementary information on structure in the form of the distribution of anelastic properties. On the basis of the amplitude information from seismic interferometry from the linear LASSIE array in the Los Angeles basin, we apply station-triplet attenuation tomography to obtain a 2D depth profile for the attenuation structure of the uppermost 0.6 km. The array crosses four Quaternary faults, three of which are blind. The attenuation tomography resolves strong attenuation (shear attenuation Qs ~ 20) for the fault zones and is consistent with sharp boundaries across them.

Tectonostratigraphic record of late Miocene–early Pliocene transtensional faulting in the Eastern California shear zone, southwestern USA

AbstractThe Eastern California shear zone (ECSZ; southwestern USA) accommodates ~20%–25% of Pacific–North America relative plate motion east of the San Andreas fault, yet little is known about its early tectonic evolution. This paper presents a detailed stratigraphic and structural analysis of the uppermost Miocene to lower Pliocene Bouse Formation in the southern Blythe Basin, lower Colorado River valley, where gently dipping and faulted strata provide a record of deformation in the paleo-ECSZ. In the western Trigo Mountains, splaying strands of the Lost Trigo fault zone include a west-dipping normal fault that cuts the Bouse Formation and a steeply NE-dipping oblique dextral-normal fault where an anomalously thick (~140 m) section of Bouse Formation siliciclastic deposits filled a local fault-controlled depocenter. Systematic basinward thickening and stratal wedge geometries in the western Trigo and southeastern Palo Verde Mountains, on opposite sides of the Colorado River valley, record basinward tilting during deposition of the Bouse Formation. We conclude that the southern Blythe Basin formed as a broad transtensional sag basin in a diffuse releasing stepover between the dextral Laguna fault system in the south and the Cibola and Big Maria fault zones in the north. A palinspastic reconstruction at 5 Ma shows that the southern Blythe Basin was part of a diffuse regional network of linked right-stepping dextral, normal, and oblique-slip faults related to Pacific–North America plate boundary dextral shear. Diffuse transtensional strain linked northward to the Stateline fault system, eastern Garlock fault, and Walker Lane, and southward to the Gulf of California shear zone, which initiated ca. 7–9 Ma, implying a similar age of inception for the paleo-ECSZ.

Thin crème brûlée rheological structure for the Eastern California Shear Zone

AbstractSince the occurrence of the 1992 CE Mw 7.3 Landers and 1999 Mw 7.1 Hector Mine earthquakes in the Mojave Desert (California, USA), postseismic deformation following both earthquakes has been intensively studied, and models with a strong crust overlying a low-viscosity mantle asthenosphere have been favored. However, we recently found that the near-field postseismic transients after the two earthquakes have lasted longer than previously thought, which requires a revision of the postseismic modeling. Our new modeling results based on the revised postseismic transients show that: (1) the effective viscosity of the lower crust beneath the Mojave region at the decadal time scale is ∼2 × 1020 Pa·s (transient viscosity ∼2 × 1019 Pa·s), i.e., only ∼5 times that of the underlying mantle asthenosphere, and (2) the transient viscosity of the upper mantle exhibits a time-dependent increase, providing fresh geodetic evidence for frequency-dependent rheology (e.g., Andrade or extended Burgers rheology). The inferred transient rheology for the first year agrees well with that obtained for the July 2019 Mw 6.4 and Mw 7.1 Ridgecrest earthquakes ∼180 km north of the two Mojave events. Our modeling results support a thin crème brûlée model for the Eastern California Shear Zone (part of the Pacific-North America plate boundary) in which both the lower crust and the upper mantle exhibit ductility at decadal time scales.

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland (USA)

AbstractCatalina Basin, located within the southern California Inner Continental Borderland (ICB), United States, is traversed by two active submerged fault systems that are part of the broader North America–Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the ∼8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ∼3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

Distributed Neogene faulting across the western to central Arizona metamorphic core complex belt: Synextensional constriction and superposition of the Pacific–North America plate boundary on the southern Basin and Range

Abstract We present fault data from a belt of Miocene metamorphic core complexes in western and central Arizona (USA) to determine patterns of brittle strain during and after large-magnitude extension, and to evaluate the magnitude of postextensional dextral shear across the region. In the White Tank Mountains, coeval WNW- to NW-striking dextral, normal, and oblique dextral-normal faults accommodated constrictional strain with extension subparallel to the direction of ductile stretching during core complex development. Northwest-striking oblique dextral-normal faults locally accommodated similar strain in the Harquahala Mountains, whereas in the South Mountains, constriction was primarily partitioned on NE-dipping normal faults and conjugate NW- and north-striking strike-slip faults. We interpret brittle constrictional strain to have developed during the late stages of large-magnitude extension associated with core complex development and folding of detachment fault corrugations. The oblique orientation of the Arizona core complex belt with respect to the extension direction likely resulted in a minor component of dextral transtension, accounting for much of the constrictional strain. In addition, far-field stresses associated with the transtensional Pacific–North America plate boundary may have contributed to constriction, which characterizes most Neogene detachment fault systems in the southwest Cordillera. Following cessation of detachment fault slip across the Arizona core complex belt (ca. 14–12 Ma), distributed NW-striking dextral and oblique dextral–NE-side-up (reverse) faults modified the topographic envelope of corrugations to an orientation clockwise of the core complex extension direction. Based on our analysis of this misalignment, we interpret the postdetachment fault dextral shear strain to increase northwestward from 0.03 across the South Mountains (0.5–0.6 km total slip across 18 km) to >0.03–0.07 across the Harquahala and Harcuvar Mountains (1.2–2.5 km of total slip across ∼35 km) and ∼0.2 across the Buckskin-Rawhide Mountains (7–8 km across 36 km). This along-strike variation in dextral shear is consistent with the regional pattern of distributed strain associated with the Pacific–North America plate boundary, as cumulative dextral offset in the lower Colorado River region increases toward the eastern Mojave Desert region to the northwest.

Subduction control on the curie isotherm around the Pacific-North America plate boundary in northwestern Mexico (Gulf of California). Preliminary results

Spectral analysis of NAMAG magnetic data enabled us to estimate depths to the Curie isotherm along the Pacific-North America plate boundary. The estimated depths for the Gulf of California, and southern Baja California peninsula, correlate quite well with the depths to the Moho available from previous studies based on receiver function, and seismic refraction. In northernmost Baja California, and southwestern USA no correlation is observed between depths to the Curie isotherm and depths to the mantle obtained from receiver function analysis. Depths to the Curie isotherm are shallower. Along the coastal plains of Sonora and Sinaloa, differences between receiver function based Mantle depths and Curie depths are equally large. However, there is more consistency with depths established by seismic refraction studies. Four zones with shallow Curie isotherm are identified in southern Gulf of California (GS1, GS2, GS3, and GS4). GS1 is located at the Gulf of California mouth. The Alarcón rise is located between GS1 and GS2. Pescaderos Basin is located northwest of GS2. GS3 stretches from the Carmen Basin to the Farallón Basin. GS4 extends from Tiburón Island up to northern Guaymas Basin. Northernmost shallow Curie depth zone (GN1) comprises Upper and Lower Delfín Basins, as well as the Consag and Wagner Basins. A northern prolongation also covers Pinacate Volcanic center. The southern shallow Curie isotherm zones are associated with lithospheric-asthenospheric material upwelling zones. GN1 also includes a convective component related to the younger magmatism of the Pinacate Volcanic Field.Deeper Curie depths are found at southern Baja California peninsula, interpreted as associated with thicker continental or stretched crust. It is possible that the crust is underlain or underplated by magnetic oceanic crust as suggested by satellite magnetic anomalies centered at the Magdalena shelf. A contrasting pattern features northern Baja California: deep Curie zones to the west contrasting with relative shallower Curie isotherm areas to the east. The prolongation towards the peninsula of the extinct Shirley transform fracture zone roughly separates the two domains observed along the peninsula, and suggests that the Curie isotherm along the peninsula is controlled by differences subduction of the Guadalupe and Magdalena microplates. Major differences pointed out between northern and southern Gulf of California might indicate that subduction also played a key role at the beginning of the opening of the Gulf of California, however, currently, the Curie pattern is controlled by the rifting processes (shallow Curie zones correlating quite well with the rift basins and the lithosphere-asthenosphere upwelling material).

Vertical-displacement history of an active Basin and Range fault based on integration of geomorphologic, stratigraphic, and structural data

Knowledge of the last reactivation age of faults in the western Basin and Range province (western North America) is key to understanding the recent evolution of the province in the context of the Pacific-North America plate boundary region. The Dixie Valley fault system (DVFS;Nevada, USA) is an important active normal fault in this region, but its slip history is not well known. Our goal is to determine the age of faulting initiation and the history of vertical displacement at the million-year time scale. We used well data from the Dixie Valley geothermal field and geologic maps to calculate offsets of geologic units. Tectonic events and their ages were determined from knickpoint analysis in the Stillwater Range. We then matched basin unconformities and knickpoints to obtain a vertical displacement history. The age of inception of the modern DVFS is likely between 13 and 7 Ma. The total vertical displacement of the geologic units is between 3 and 3.5 km, and most of it occurred in the last 2-3 Ma. Assuming an erosion rate between 0.03 and 0.07 m/ka, the maximum vertical displacement rate (similar to 1-2 mm/a) occurred between 3 and 0.5 Ma, and resulted in similar to 2 km of vertical displacement. Finally, the age-versus-distance profile of the Stillwater Range crest is tapered at both ends, as expected for a propagating range-bounding normal fault, but it also has two maxima matching the deepest parts of the Dixie Valley basin. This indicates that the present-day DVFS may have started out as two separate strands that connected within 2-3 Ma of inception. Our work shows that the combination of stratigraphic and structural data from the basin with geomorphological data from the adjacent mountain range is suitable for placing constraints on the displacement history at the million-year time scale of an active range-bounding normal fault. The resulting displacement-time paths for normal faults may not be as uniform as commonly assumed.

The “Tsunami Earthquake” of 13 April 1923 in Northern Kamchatka: Seismological and Hydrodynamic Investigations

We present a seismological and hydrodynamic investigation of the earthquake of 13 April 1923 at Ust’-Kamchatsk, Northern Kamchatka, which generated a more powerful and damaging tsunami than the larger event of 03 February 1923, thus qualifying as a so-called “tsunami earthquake”. On the basis of modern relocations, we suggest that it took place outside the fault area of the mainshock, across the oblique Pacific-North America plate boundary, a model confirmed by a limited dataset of mantle waves, which also confirms the slow nature of the source, characteristic of tsunami earthquakes. However, numerical simulations for a number of legitimate seismic models fail to reproduce the sharply peaked distribution of tsunami wave amplitudes reported in the literature. By contrast, we can reproduce the distribution of reported wave amplitudes using an underwater landslide as a source of the tsunami, itself triggered by the earthquake inside the Kamchatskiy Bight.

Latest Miocene transtensional rifting of northeast Isla Tiburón, eastern margin of the Gulf of California

Details about the timing and kinematics of rifting are crucial to understand the conditions that led to strain localization, continental rupture, and formation of the Gulf of California ocean basin. We integrate detailed geologic and structural mapping, basin analysis, and geochronology to characterize transtensional rifting on northeastern Isla Tiburón, a proximal onshore exposure of the rifted North America margin, adjacent to the axis of the Gulf of California. Slip on the Kunkaak normal fault tilted its hanging wall down-to-the-east ~70° and formed the non-marine Tecomate basin, deposited across a ~20° angular unconformity. From 7.1–6.4Ma, the hanging wall tilted at 35±5°/Myr, while non-marine sandstone and conglomerate accumulated at 1.4±0.2mm/yr. At least 1.8±0.1km of sediments and pyroclastic deposits accumulated in the Tecomate basin concurrent with clockwise vertical-axis block rotation and ~2.8km of total dip-slip motion on the Kunkaak fault. Linear extrapolation of tilting and sedimentation rates suggests that faulting and basin deposition initiated ~7.6–7.4Ma, but an older history involving initially slower rates is permissible. The Kunkaak fault and Tecomate basin are truncated by NW-striking, dextral-oblique structures, including the Yawassag fault, which accrued >8km of post-6.4Ma dextral displacement. The Coastal Sonora fault zone on mainland Sonora, which accrued several tens of kilometers of late Miocene dextral offset, continues to the northwest, across northeastern Isla Tiburón and offshore into the Gulf of California. The establishment of rapid, latest Miocene transtension in the Coastal Sonora fault zone was synchronous with the 8–7Ma onset of transform faulting and basin formation along the nascent Pacific-North America plate boundary throughout northwestern Mexico and southern California. Plate boundary strain localized into this Gulf of California shear zone, a narrow transtensional belt that subsequently hosted the marine incursion and continental rupture in the Gulf of California.

Active tectonics in the Gulf of California and seismicity (M > 3.0) for the period 2002–2014

We present a catalog of accurate epicenter coordinates of earthquakes located in the Gulf of California (GoC) in the period 2002–2014 that permits us to analyze the seismotectonics and to estimate the depth of the seismogenic zone of this region. For the period April 2002 to December 2014 we use body-wave arrival times from regional stations of the Broadband Seismological Network of the GoC (RESBAN) operated by CICESE to improve hypocenter locations reported by global catalogs. For the northern region of the GoC (30°N–32°N) we added relocated events from the 2011-Hauksson-Yang-Shearer, Waveform Relocated Earthquake Catalog for Southern California (Hauksson et al., 2012; Lin et al., 2007). From October 2005 to October 2006 we incorporated hypcenters located by Sumy et al. (2013) in the southern GoC combining an array of ocean-bottom seismographs, of the SCOOBA experiment, with onshore stations of the NARS-Baja array. This well constrained catalog of seismicity highlights zones of active tectonics and seismic deformation within the North America-Pacific plate boundary. We estimate that the minimum magnitude of completeness of this catalog is Mc=3.3±0.1 and the b=0.92±0.04 value of the Gutenberg-Richter relation. We find that most earthquakes in the southern GoC are generated by transform faults and this region is more active than the central GoC region. However, the northern region, where most deformation is generated by oblique faults is as active as the southern region. We used the ISC catalog to evaluate the size distribution of seismicity of these regions, and the b value of the Gutenberg-Richter relation and found that b is slightly lower in the central GoC (b=0.86±0.02) compared to the northern (b=1.14±0.04) and the southern (b=1.11±0.04) regions. We observed seismicity that occurs in the Stable Central Peninsular Province, despite the fact that significant active deformation has not been identified in this region.

Fault zone characteristics and basin complexity in the southern Salton Trough, California

Abstract Ongoing oblique slip at the Pacific–North America plate boundary in the Salton Trough produced the Imperial Valley (California, USA), a seismically active area with deformation distributed across a complex network of exposed and buried faults. To better understand the shallow crustal structure in this region and the connectivity of faults and seismicity lineaments, we used data primarily from the Salton Seismic Imaging Project to construct a three-dimensional P-wave velocity model down to 8 km depth and a velocity profile to 15 km depth, both at 1 km grid spacing. A VP = 5.65–5.85 km/s layer of possibly metamorphosed sediments within, and crystalline basement outside, the valley is locally as thick as 5 km, but is thickest and deepest in fault zones and near seismicity lineaments, suggesting a causative relationship between the low velocities and faulting. Both seismicity lineaments and surface faults control the structural architecture of the western part of the larger wedge-shaped basin, where two deep subbasins are located. We estimate basement depths, and show that high velocities at shallow depths and possible basement highs characterize the geothermal areas.

Anisotropy from SKS splitting across the Pacific-North America plate boundary offshore southern California

SKS arrivals from ocean bottom seismometer (OBS) data from an offshore southern California deployment are analysed for shear wave splitting. The project involved 34 OBSs deployed for 12 months in a region extending up to 500 km west of the coastline into the oceanic Pacific plate. The measurement process consisted of removing the effects of anisotropy using a range of values for splitting fast directions and delay times to minimize energy along the transverse seismometer axis. Computed splitting parameters are unexpectedly similar to onland parameters, exhibiting WSW–ENE fast polarization directions and delays between 0.8 and 1.8 s, even for oceanic plate sites. This is the first SKS splitting study to extend across the entire boundary between the North America and Pacific plates, into the oceanic part of the Pacific plate. The splitting results show that the fast direction of anisotropy on the Pacific plate does not align with absolute plate motion (APM), and they extend the trend of anisotropy in southern California an additional 500 km west, well onto the oceanic Pacific plate. We model the finite strain and anisotropy within the asthenosphere associated with density–buoyancy driven mantle flow and the effects of APM. In the absence of plate motion effects, such buoyancy driven mantle flow would be NE-directed beneath the Pacific plate observations. The best-fit patterns of mantle flow are inferred from the tomography-based models that show primary influences from foundering higher-density zones associated with the history of subduction beneath North America. The new offshore SKS measurements, when combined with measurements onshore within the plate boundary zone, indicate that dramatic lateral variations in density-driven upper-mantle flow are required from offshore California into the plate boundary zone in California and western Basin and Range.

Slip history of the La Cruz fault: Development of a late Miocene transform in response to increased rift obliquity in the northern Gulf of California

The Gulf of California rift has accommodated oblique divergence of the Pacific and North America plates in northwestern México since Miocene time. Due to its infancy, its rifted margins preserve a rare onshore record of early continental break-up processes and an opportunity to investigate the role of rift obliquity in strain localization. We map rift-related structures and syn-tectonic basins on southern Isla Tiburón, a proximal onshore exposure of the rifted North America margin. We integrate analysis and geochronology of syn-tectonic sedimentary basins and mapping of crosscutting relationships to characterize the style and timing of fault activity. On southern Isla Tiburón, an early phase of extension initiated between ~19–17Ma and ~12.2Ma. Subsequently, these normal faults and related basins were cut by the La Cruz strike-slip fault and buried by deposits of the La Cruz basin, an elongate, fault-controlled trough coextensive with the La Cruz fault. Crosscutting relationships show that the NW-striking La Cruz fault accrued 5±2km of dextral slip ~8–4Ma. The La Cruz fault and parallel Tiburón transform were kinematically linked to detachment faulting that accommodated latest Miocene to Pliocene oblique opening of the offshore Upper Tiburón pull-apart basin. The onset of strike-slip faulting on Isla Tiburón was synchronous with the ~8–6Ma onset of transform faulting and basin formation along >1000km of the reconstructed Pacific-North America plate boundary. This transition coincides with the commencement of a clockwise azimuthal shift in Pacific-North America relative plate motion that increased the obliquity of the Gulf of California rift and formed the Gulf of California shear zone. The record from the proto-Gulf of California illustrates how highly oblique rift geometries, where transform faults are kinematically linked to pull-apart basins, enhance the ability of continental lithosphere to rupture and, ultimately, hasten the formation of new oceanic rift basins.