Oxide Oxygen Research Articles

S-doped NiCo layered double hydroxides enable efficient and durable methanol oxidation and oxygen reduction reactions for Zn-methanol-air batteries

The employment of alcohol oxidation reactions (AORs) is thermodynamically more favorable to replace the anodic oxygen evolution reaction (OER) in rechargeable Zn-air batteries (ZABs). As a representative AOR-coupled ZAB, Zn-methanol-air battery (ZMAB) gratifyingly delivers a lower charge voltage, higher energy efficiency, longer cycle life and more valuable charge product in comparison with the traditional ZAB. For such emerging ZMABs, it is imperative to explore efficient, stable and cost-effective bifunctional electrocatalysts for both methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). Herein, sulfur-doped NiCo layered double hydroxides (termed NiCo-LDH@SOH) are fabricated by a room-temperature surface sulfurization route. Remarkably, the NiCo-LDH@SOH heterostructure catalyst achieves a superb bifunctional activity for MOR and ORR, performing a low potential gap ΔE between the Ej10 for MOR and the half-wave potential E1/2 for ORR of only 0.596 V, far surpassing that (0.790 V) for Pt/C-IrO2 benchmark catalyst. The electronic interactions between S2− and transition metal ions significantly accelerate the charge transfer process and generate highly efficient Ni3+ and Co2+ active sites on NiCo-LDH@SOH, which account for the exceptional MOR and ORR performance, respectively. Thanks to the favorable replacement of OER with MOR and the excellent MOR/ORR bifunctional activity of NiCo-LDH@SOH, the ZMAB can output a comparable discharge power density (140 mW cm−2) to the traditional ZAB counterpart (149 mW cm−2), but a much lower charge voltage than the latter. In consequence, the ZMAB demonstrates an extraordinary long-term cyclability of 2880 cycles for 480 h (20 days) with almost no degradation, which is more than 5 times longer than that of the traditional ZAB.

Synthesis, Anti-Inflammatory Activities, and Molecular Docking Study of Novel Pyxinol Derivatives as Inhibitors of NF-κB Activation.

Pyxinol, an active metabolite of ginsenosides in human hepatocytes, exhibits various pharmacological activities. Here, a series of C-3 modified pyxinol derivatives was designed and virtually screened by molecular docking with the key inflammation-related proteins of the nuclear factor kappa B (NF-κB) pathway. Some of the novel derivatives were synthesized to assess their effects in inhibiting the production of nitric oxide (NO) and mitochondrial reactive oxygen species (MtROS) in lipopolysaccharide-triggered RAW264.7 cells. Derivative 2c exhibited the highest NO and MtROS inhibitory activities with low cytotoxicity. Furthermore, 2c decreased the protein levels of interleukin 1β, tumor necrosis factor α, inducible nitric oxide synthase, and cyclooxygenase 2 and suppressed the activation of NF-κB signaling. Cellular thermal shift assays indicated that 2c could directly bind with p65 and p50 in situ. Molecular docking revealed that 2c's binding to the p65-p50 heterodimer and p50 homodimer was close to their DNA binding sites. In summary, pyxinol derivatives possess potential for development as NF-κB inhibitors.

The requirement of the mitochondrial protein NDUFS8 for angiogenesis

Mitochondria are important for the activation of endothelial cells and the process of angiogenesis. NDUFS8 (NADH:ubiquinone oxidoreductase core subunit S8) is a protein that plays a critical role in the function of mitochondrial Complex I. We aimed to investigate the potential involvement of NDUFS8 in angiogenesis. In human umbilical vein endothelial cells (HUVECs) and other endothelial cell types, we employed viral shRNA to silence NDUFS8 or employed the CRISPR/Cas9 method to knockout (KO) it, resulting in impaired mitochondrial functions in the endothelial cells, causing reduction in mitochondrial oxygen consumption and Complex I activity, decreased ATP production, mitochondrial depolarization, increased oxidative stress and reactive oxygen species (ROS) production, and enhanced lipid oxidation. Significantly, NDUFS8 silencing or KO hindered cell proliferation, migration, and capillary tube formation in cultured endothelial cells. In addition, there was a moderate increase in apoptosis within NDUFS8-depleted endothelial cells. Conversely, ectopic overexpression of NDUFS8 demonstrated a pro-angiogenic impact, enhancing cell proliferation, migration, and capillary tube formation in HUVECs and other endothelial cells. NDUFS8 is pivotal for Akt-mTOR cascade activation in endothelial cells. Depleting NDUFS8 inhibited Akt-mTOR activation, reversible with exogenous ATP in HUVECs. Conversely, NDUFS8 overexpression boosted Akt-mTOR activation. Furthermore, the inhibitory effects of NDUFS8 knockdown on cell proliferation, migration, and capillary tube formation were rescued by Akt re-activation via a constitutively-active Akt1. In vivo experiments using an endothelial-specific NDUFS8 shRNA adeno-associated virus (AAV), administered via intravitreous injection, revealed that endothelial knockdown of NDUFS8 inhibited retinal angiogenesis. ATP reduction, oxidative stress, and enhanced lipid oxidation were detected in mouse retinal tissues with endothelial knockdown of NDUFS8. Lastly, we observed an increase in NDUFS8 expression in retinal proliferative membrane tissues obtained from human patients with proliferative diabetic retinopathy. Our findings underscore the essential role of the mitochondrial protein NDUFS8 in regulating endothelial cell activation and angiogenesis.

Synergistic photogeneration of nitric oxide and singlet oxygen by nanofiber membranes via blue and/or red-light irradiation: Strong antibacterial action

New functionalities were added to biocompatible polycaprolactone nanofiber materials through the co-encapsulation of chlorin e6 trimethyl ester (Ce6) photogenerating singlet oxygen and absorbing light both in the blue and red regions, and using 4-(N-(aminopropyl)-3-(trifluoromethyl)-4-nitrobenzenamine)-7-nitrobenzofurazan, NO-photodonor (NOP), absorbing light in the blue region of visible light. Time-resolved and steady-state luminescence, as well as absorption spectroscopy, were used to monitor both photoactive compounds. The nanofiber material exhibited photogeneration of antibacterial species, specifically nitric oxide and singlet oxygen, upon visible light excitation. This process resulted in the efficient photodynamic inactivation of E. coli not only close to nanofiber material surfaces due to short-lived singlet oxygen, but even at longer distances due to diffusion of longer-lived nitric oxide. Interestingly, nitric oxide was also formed by processes involving photosensitization of Ce6 during irradiation by red light. This is promising for numerous applications, especially in the biomedical field, where strictly local photogeneration of NO and its therapeutic benefits can be applied using excitation in the “human body phototherapeutic window” (600–850 nm). Generally, due to the high permeability of red light, the photogeneration of NO can be achieved in any aqueous environment where direct excitation of NOP to its absorbance in the blue region is limited.

Ab initio calculations of the chemisorption of atomic H and O on Pt and Ir metal and on bimetallic Pt x Ir y surfaces

Abstract Understanding the chemisorption of atoms on precious metal surfaces is of substantial interest for the rational design of heterogeneous and electrochemical catalysts. In this study, we report density functional theory (DFT) investigations of the chemisorption of atomic H and O on bimetallic Pt x Ir y (111) surfaces for bifunctional anode catalyst materials in polymer electrolyte membrane (PEM) fuel cells. We found that for both adsorbates, the adsorption on the Pt(111) surface is in general less exothermic than on the Ir(111) surface. Our study has revealed that chemisorption on the bimetallic surfaces becomes more stable with increasing number of Ir surface atoms at the adsorption site. While for hydrogen atoms the ONTOP sites yield the most negative adsorption energies, the chemisorption of oxygen atoms appears to be most stable on the FCC sites for both the mono- and bimetallic surfaces. Using the ab initio thermodynamics approach, we calculated phase diagrams for the chemisorption of H and O atoms on these metal surfaces in order to transfer our findings to finite temperature and pressure conditions. Our theoretical results may provide an improved understanding of the hydrogen oxidation reaction (HOR) and oxygen evolution reaction (OER) on intermetallic Pt x Ir y (111) surfaces and may be helpful for the rational design of new bifunctional PEM fuel cell anode catalyst materials.

Advanced remediation in the presence of ferrous iron and carbonate-containing water by oxygen-induced oxidation of organic contaminants

Mechanistic investigations of an environmentally friendly and easy-to-implement oxidation method in the remediation of contaminated anoxic waters, i.e. groundwater, through the sole use of oxygen for the oxygen-induced oxidation of pollutants were the focus of this work. This was achieved by the addition of O2 under anoxic conditions in the presence of ferrous iron which initiated the ferrous oxidation and the simultaneous formation of reactive •OH radicals. The involvement of inorganic ligands such as carbonates in the activation of oxygen as part of the oxidation of Fe2+ in water was investigated, too. The formation of •OH radicals, was confirmed in two different, indirect approaches by a fluorescence-based method involving coumarin as •OH scavenger and by the determination of the oxidation products of different aromatic VOCs. In the latter case, the oxidation products of several typical aromatic groundwater contaminants such as BTEX (benzene, toluene, ethylbenzene, xylenes), indane and ibuprofen, were determined. The influence of other ligands in the absence of bicarbonate and the effect of pH were also addressed.The possibility of activation of O2 in carbonate-rich water i.e. groundwater, may also potentially contribute to oxidation of groundwater contaminants and support other primary remediation techniques.

Oxide dissolution and oxygen diffusion scenarios in niobium and implications on the Bean–Livingston barrier in superconducting cavities

We generalize a native Nb2O5 dissolution model [G. Ciovati, Appl. Phys. Lett. 89, 022507 (2006)] to sequential overlayer dissolutions, multilayer dissolution, and realistic temperature profiles, which may be applicable to other materials. The model is applied to secondary ion mass spectrometry depth profile measurements for varying temperature profiles and two-step oxide dissolution in Nb and found to agree well. In the context of the Meissner screening response due to impurity profiles on the length scale of the London penetration depth, the shallow diffusion of O impurities results in a substantial decrease in the peak supercurrent density near the surface. In this framework, oxide dissolution and oxygen diffusion can account for a rise in peak supportable magnetic field in SRF cavities with baking time and a suppression after the optimal baking time is reached, in good agreement with peak-field baking temperatures and times as well as recent quench field measurements.

Singlet Oxygen Formation Mechanism for the H2O2-Based Fenton-like Reaction Catalyzed by the Carbon Nitride Homojunction.

The singlet oxygen (1O2) oxidation process activated by metal-free catalysts has recently attracted considerable attention for organic pollutant degradation; however, the 1O2 formation remains controversial. Simultaneously, the catalytic activity of the metal-free catalyst limits the practical application. In this study, carbon nitride (HCCN) containing an intramolecular homojunction, a kind of metal-free catalyst, exhibits excellent activity compared to g-C3N4 (CN) and crystalline carbon nitride (HCN) for tetracycline hydrochloride degradation through the H2O2-based Fenton-like reaction. The rate constant for HCCN increased about 16.1 and 8.9 times than that of CN and HCN, respectively. The activity of HCCN was enhanced, and the dominant reactive oxygen species (ROS) changed from hydroxyl radicals (•OH) to 1O2 with an increase in pH from 4.5 to 11.5. A novel formation pathway of 1O2 was revealed. This result is different from the normal reference, in which •OH is always the primary ROS in the H2O2-based Fenton-like reaction. This study may provide a possible strategy for the investigation on the nonradical oxidation process in the Fenton-like reaction.

Oxygen Reaction of Nonlayered Tetrahedral KFeO2 Positive Electrode for Potassium-Ion Battery Using an FSA-based Ionic Liquid Electrolyte

K-ion batteries (KIBs) that use ionic liquid (IL) electrolytes are promising candidates for post-Li-ion batteries because of the abundance of potassium resources and safety of ILs. We successfully synthesized stoichiometric KFeO2 using a solid-state method and evaluated its charge–discharge performance as a KIB positive electrode material, with an amide-based IL electrolyte at 298 K. Transmission electron microscopy, X-ray photoelectron spectroscopy, synchrotron soft X-ray absorption spectroscopy, and energy-dispersive X-ray spectroscopy data showed that the bulk redox and surface oxidation of oxygen, rather than those of iron, contribute to the reversible and irreversible capacities, respectively. Capacity decay occurred upon repeated cycling, owing to the surface irreversible oxidation of oxygen ions to form O2 and K1−x FeO2−x/2, which blocks the pathways of K+ transfer to KFeO2 particles. This study provides a vital platform for constructing novel KIBs and elucidates the important role of oxygen in KFeO2 positive electrode.

Oxygen permeation mass transfer modeling and onion-like micromechanical modeling to predict the effect of multilayered interface on oxidation resistance and mechanical properties of composites

To predict oxidative damage of interfaces and fibers under high temperature aerobic environment and mechanical strength of composites before and after oxidation, oxygen permeation mass transfer modeling and onion-like micromechanical modeling of multilayered interface were proposed. The oxygen mass transfer theory and oxidation damage theory of PyC interface were used to establish the two models. The oxidative damage of PyC interface was extended to (PyC-SiC)n multilayered interface, and transformation of SiC phase and microcracks caused by thermal mismatch were also considered. The law of oxygen permeation mass transfer and the evolution of fiber oxidative damage in the “Carbon fiber/(PyC-SiC)n multilayered interface” region were revealed. The mechanical strength of composites under different interface layers was researched, resembling an onion-like wrapping in layers from the core outwards. Furthermore, Cf@(PyC-SiC)n/SiC(n = 1/2/3/4) composites were prepared by chemical vapor infiltration (CVI) method. The mechanical properties of the composites were tested before and after oxidation. A comparison was made between the experimental and predicted tensile strengths before and after oxidation. The predicted results of tensile strength were found to be in good agreement with the experimental ones. In addition, the results show that PyC-SiC multilayered interface has a positive effect on the tensile strength of the composites, mainly as the cracks are deflected and branched by the multilayered interface to promote the multistage pull-out of the fibers. With the increase of interface number, the oxygen diffusion path was lengthened and zigzagged, reducing the oxidative damage of fiber and interface.

Transcriptomic analysis reveals Cilostazol's role in ameliorating cardiovascular disease: Inhibition of monocyte-to-macrophage differentiation and reduction of endothelial cell reactive oxygen species production

BackgroundCardiovascular diseases (CVDs) are the leading global cause of death, with atherosclerosis as the primary cause. Chronic inflammation, endothelial dysfunction, and the role of molecules like nitric oxide and reactive oxygen species are crucial in this context. Our previous research indicated that cilostazol and ginkgo biloba extract could enhance the ability of endothelial cells to dissolve blood clots, but the effects of cilostazol on monocytes remain unexplored. MethodThis study utilized peripheral blood mononuclear cells from 10 healthy donors, treated ex vivo with cilostazol. RNA-sequencing, over-representation analysis, xCell stromal cell analysis, and Gene Set Enrichment Analysis were employed to investigate the gene expression changes and biological pathways affected by cilostazol treatment. ResultsThe study identified specific gene sets and pathways that were enriched or reduced in response to cilostazol treatment, providing insights into its effects on monocytes and potential therapeutic applications in CVD. The analysis also revealed the potential impact of cilostazol on the stromal cell compartment, further broadening our understanding of its multifaceted role. ConclusionThe findings offer a nuanced understanding of the advantages and mechanisms of cilostazol in CVD, uncovering novel therapeutic targets and strategies to enhance the clinical application of cilostazol and contributing to the broader implications of this therapy in cardiovascular health.

The Role of the NLRP3 Inflammasome in the Molecular and Biochemical Mechanisms of Cervical Ripening: A Comprehensive Review.

The uterine cervix is one of the key factors involved in ensuring a proper track of gestation and labor. At the end of the gestational period, the cervix undergoes extensive changes, which can be summarized as a transformation from a non-favorable cervix to one that is soft and prone to dilation. During a process called cervical ripening, fundamental remodeling of the cervical extracellular matrix (ECM) occurs. The cervical ripening process is a derivative of many interlocking and mutually driving biochemical and molecular pathways under the strict control of mediators such as inflammatory cytokines, nitric oxide, prostaglandins, and reactive oxygen species. A thorough understanding of all these pathways and learning about possible triggering factors will allow us to develop new, better treatment algorithms and therapeutic goals that could protect women from both dysfunctional childbirth and premature birth. This review aims to present the possible role of the NLRP3 inflammasome in the cervical ripening process, emphasizing possible mechanisms of action and regulatory factors.

Construction of Co3S4/MoS2 p-p heterojunction as an efficient catalyst for water splitting and electrochemical oxidation of organic molecules

Electrolysis of wastewater containing urea or small organic molecules while obtaining hydrogen energy is a promising strategy for realizing energy acquisition and environmental protection. Construction of semiconductor heterojunctions to regulate the transfer of interfacial electrons has been regarded as an efficient approach to improve the electrocatalytic performance of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) for the materials, and obtain the bifunctional electrocatalysts aiming to construct a water splitting cell using one non-precious metal material. Herein, a bifunctional Co3S4/MoS2 electrocatalyst with a p-p heterojunction and hollow structure has been successfully prepared through the precipitation-hydrothermal method, which presents the high bifunctional electrocatalytic performance due to the formed path of electron transfer in the heterojunction interface being favorable for OH- adsorption. The accelerated electron transfer in heterojunction interfaces endows Co3S4/MoS2 presenting the superior electrocatalytic performance including OER, urea oxidation reaction (UOR) and oxygen evolution reaction in lactic acid solution (OER-LA). At 50 mA cm−2, the voltages of HER, OER, UOR and OER-LA are −0.123, 1.511, 1.400, 1.440 V vs. RHE, respectively. In a two-electrode electrolytic cell using Co3S4/MoS2 as anode and cathode displays the outstanding electrocatalytic performance in 1 M KOH, 1 M KOH containing 0.5 M urea, and 1 M KOH containing 0.5 M lactic acid electrolytes, superior to the most reported materials. This research provides a strategy for the construction of advanced bifunctional electrocatalysts using metal sulfides to form heterojunction for realizing the high bifunctional catalytic activities in hydrogen production and organic molecule decontamination.

Lattice Oxygen Redox Mechanisms in the Alkaline Oxygen Evolution Reaction

AbstractUnderstanding of fundamental mechanism and kinetics of the oxygen evolution reaction (OER) is pivotal for designing efficient OER electrocatalysts owing to its key role in electrochemical energy conversion devices. In the past few years, the lattice oxygen oxidation mechanism (LOM) arising from the anodic redox chemistry has attracted significant attention as it involves a direct O─O coupling and thus bypasses thermodynamic limitations in the traditional adsorbate evolution mechanism (AEM). Transition metal‐based oxyhydroxides are generally acknowledged as the real catalytic phase in alkaline media. In particular, their low‐dimensional layered structures offer sufficient structural flexibility to trigger the LOM. Herein, a comprehensive overview is provided for recent advances in anion redox from LOM‐based electrocatalysts. Based on analyses of electronic structure of electrocatalysts and LOM, a strategy is proposed to activate LOM. Possible identification techniques for corroboration of the oxygen redox are also reviewed. In addition, the structural reconstruction process induced by the LOM is focused and the importance of multiple in situ/operando characterizations is highlighted to unveil the structural and chemical origins of the LOM. To conclude, a prospect on the remaining challenges and future opportunities for LOM electrocatalysts is presented.

Reduction of molecular oxygen in flavodiiron proteins - Catalytic mechanism and comparison to heme-copper oxidases

The family of flavodiiron proteins (FDPs) plays an important role in the scavenging and detoxification of both molecular oxygen and nitric oxide. Using electrons from a flavin mononucleotide cofactor molecular oxygen is reduced to water and nitric oxide is reduced to nitrous oxide and water. While the mechanism for NO reduction in FDPs has been studied extensively, there is very little information available about O2 reduction. Here we use hybrid density functional theory (DFT) to study the mechanism for O2 reduction in FDPs. An important finding is that a proton coupled reduction is needed after the O2 molecule has bound to the diferrous diiron active site and before the OO bond can be cleaved. This is in contrast to the mechanism for NO reduction, where both NN bond formation and NO bond cleavage occurs from the same starting structure without any further reduction, according to both experimental and computational results. This computational result for the O2 reduction mechanism should be possible to evaluate experimentally. Another difference between the two substrates is that the actual OO bond cleavage barrier is low, and not involved in rate-limiting the reduction process, while the barrier connected with bond cleavage/formation in the NO reduction process is of similar height as the rate-limiting steps. We suggest that these results may be part of the explanation for the generally higher activity for O2 reduction as compared to NO reduction in most FDPs. Comparisons are also made to the O2 reduction reaction in the family of heme‑copper oxidases.

Oxidative breakup of cemented carbide scrap by CuO-flux roasting

Tungsten carbide‑cobalt (WC-Co) composites are widely used in industry as hardmetals with superior properties and performance; however, these qualities make it difficult to recycle components made of WC-Co at their end-of-life. Herein, we present a one-step CuO-flux roasting process in which a solid-state flux supplies sufficient oxygen for the full oxidation of a hardmetal tool piece when melted. Computational assessments of the Gibbs energy of formation and its tendency to form alloys reveal that CuO is suitable for oxidizing WC cutting tools at high temperatures. After roasting a WC-Co cutting insert covered with CuO powder at 1048 °C, the insert loses its shape and changes into a friable solid oxide mass. As the oxidation reaction is highly exothermic and sustainable, the temperatures of the reactants can exceed the melting points of the oxides produced. Meltable oxide-flux roasting can be applied to the recycling of hardmetals, such as carbides and nitrides.

Dual role of sulfur doping in NiCr LDH for water oxidation: Promoting surface reconfiguration and lattice oxygen oxidation

Heterogeneous doping is widely applied to improve the oxygen evolution reaction (OER) activity of layered double metal hydroxides (LDH), but it is challenging to study the reconfiguration and reaction mechanism of catalysts. Herein, we prepared sulfur-doped NiCr LDH (Sx-NiCr LDH) pre-catalyst, which exhibits low overpotential of 244.4 mV at 100 mA cm−2 after reconfiguration. The characterization results reveal that sulfur doping not only optimizes the reconfiguration process of NiCr LDH by modulating Cr leaching, but also reduces the oxidation potential of Ni2+. Density functional theory (DFT) results show that sulfur doping reduces the energy barrier of reconfiguration, enhances the covalency of Ni-O, and upshifts the O 2p band center to promote lattice oxygen oxidation. The reconfigured catalyst requires 1.51 and 1.47 V at 10 mA cm−2 for overall water splitting at 25 °C and 80 °C, respectively. This work provides a valuable approach for designing highly active LDH catalysts.

Locking the lattice oxygen in RuO2 to stabilize highly active Ru sites in acidic water oxidation

Ruthenium dioxide is presently the most active catalyst for the oxygen evolution reaction (OER) in acidic media but suffers from severe Ru dissolution resulting from the high covalency of Ru-O bonds triggering lattice oxygen oxidation. Here, we report an interstitial silicon-doping strategy to stabilize the highly active Ru sites of RuO2 while suppressing lattice oxygen oxidation. The representative Si-RuO2−0.1 catalyst exhibits high activity and stability in acid with a negligible degradation rate of ~52 μV h−1 in an 800 h test and an overpotential of 226 mV at 10 mA cm−2. Differential electrochemical mass spectrometry (DEMS) results demonstrate that the lattice oxygen oxidation pathway of the Si-RuO2−0.1 was suppressed by ∼95% compared to that of commercial RuO2, which is highly responsible for the extraordinary stability. This work supplied a unique mentality to guide future developments on Ru-based oxide catalysts’ stability in an acidic environment.

Self-charging hybrid energy devices collaborated with enzymatic biofuel cells and supercapacitors

Enzymatic biofuel cells (EBFCs) are promising as a biocompatible power source for implantable and wearable devices, converting chemical energy of body fluids into electricity. However, they have intrinsic limitations, such as low power density and requirement for continuous fuel supply. To overcome the difficulties, hybrid energy devices (HEDs) that are combinative device of supercapacitor (SC) and EBFC are suggested in this study. They consist of anode and cathode including (i) enzymes reacting with respective fuels and (ii) mediators promoting transfer and storage of electrons. As EBFCs, HEDs exhibit exceptional fuel reactivity, achieving 0.91 and 0.51 mA/cm2 in glucose oxidation reaction and oxygen reduction reaction, while they play as SCs with excellent power and specific storage capacitance of 0.93 mW/cm2 and 307 mF/cm2. Moreover, HEDs show self-charging property that is uniquely observed in devices operated by the collaboration of enzyme and mediator. By this benefit, their open circuit voltage is well preserved in absent of fuels, while they can discharge even without supply of fuel. These features are obvious evidence that HEDs can be considered as advanced power sources for implantable and wearable devices.

Comparison of Gas Treatments of High Oxygen, Carbon Monoxide, and Nitric Oxide on Ground Beef Color in Modified Atmosphere Packaging.

The objective of this study was to evaluate the viability and performance of nitric oxide modified-atmosphere packaging (MAP) as a novel alternative to high oxygen and carbon monoxide MAP for ground beef. Packages of ground beef under high oxygen (HI-OX), carbon monoxide (CO), and nitric oxide (NO) atmospheres were evaluated for descriptive and instrumental color every 12 h during a 120 h display period. Surface myoglobin percentages, internal cooked color, thiobarbituric acid reactive substances (TBARS), and residual nitrite and nitrate were also evaluated. There were gas × time interactions for descriptive color, discoloration, a* values, b* values, deoxymyoglobin percentages, and metmyoglobin percentages (p < 0.05). There were also gas-type main effects for cooked color and TBARS (p < 0.05). Carbon monoxide maintained the most redness and least discoloration throughout the display period, while HI-OX started with a bright red color but rapidly browned (p < 0.05). Nitric oxide started as dark red to tannish-red but transitioned to a dull red (p < 0.05). However, NO had increased redness and a* values for internal cooked color (p < 0.05). Although CO outperformed NO packages, NO exhibited a unique color cycle warranting further research to optimize its use.