Oxide Fillers Research Articles

Collective effect of reduced graphene oxide and Zn2U hexaferrite filler based epoxy composites on microwave absorption with improved mechanical properties

Herein, we have synthesized Ba4Zn2Fe36O60 (Zn2U) and have produced reduced graphene oxide (rGO) wrapped filler material for the preparation of epoxy composites of different weight percentages (40, 50 and 60 wt %). These rGO wrapped Zn2U hexaferrite filler was analyzed by XRD and SEM to examine the crystal structure and distribution of Zn2U hexaferrite in between/on the surface of rGO respectively. The magnetic and mechanical properties of prepared rGO@Zn2U@epoxy composites were evaluated by employing vibrating sample magnetometer and universal testing machine respectively. The investigation involved analyzing the complex permittivity and permeability, and based on this information, an assessment of the reflection loss was conducted. The results obtained indicate that epoxy composites with a filler content of 60 % rGO@Zn2U have significant promise as an advantageous choice for EMI shielding and microwave absorption applications.

Development and characterization of corrosion-resistant plasma-sprayed Ni-Al composite coatings via graphene oxide fillers

In this study, the authors propose a procedure to enhance pure Ni-Al powders through graphene oxide dispersion in water for plasma spraying. The enhanced powders were utilized to coat A36 steel via plasma spraying. Next, the powders and the coatings were characterized by energy-dispersive X-ray spectroscopy, X-ray diffraction analysis, micro-Raman spectroscopy, and field emission scanning electron microscopy. Given the capability of the generated X-ray to characterize near surfaces to a depth of a few micrometers, the performed X-ray microanalyses convey that the carbon species incorporated within the powders through the graphene oxide dispersion can act as nanofillers reducing the number of holes/pores in the plasma-sprayed coatings. Potentiodynamic polarization testing and electrochemical impedance spectroscopy were used to investigate the corrosion behavior of the samples at two intervals: after 1 h and after 30 days of exposure to a 3.5 % NaCl solution. According to the results of the corrosion testing, the enhanced coatings can display about 2.35 times lower corrosion current density compared to pure Ni-Al coatings, with the corrosion potentials of the enhanced coatings being higher than that of pure Ni-Al coatings (i.e., improved corrosion resistance). This improvement in corrosion resistance is also evident when the enhanced coatings are compared to the A36 substrate after 30 days of exposure to the solution. It appears that the incorporated carbon nanofillers, by reducing deep holes and pores that communicate with the surface of the substrate, ultimately determine the highest corrosion resistance. Thus, the outcome offers enhanced Ni-Al coatings possessing superior anticorrosion properties that typical plasma-sprayed Ni-Al bond coats may not exhibit.

Three-dimensional bioprinted cell-adaptive hydrogel with anisotropic micropores for enhancing skin wound healing

Engineered matrices with aligned microarchitectures are pivotal in regulating the fibroblast-to-myofibroblast transition, a critical process for wound healing and scar reduction. However, developing a three-dimensional (3D) aligned matrix capable of effectively controlling this transition remains challenging. Herein, we developed a cell-adaptive hydrogel with highly oriented microporous structures, fabricated through bioprinting of thermo/ion/photo-crosslinked gelatin methacrylate/sodium alginate (GelMA/SA) incorporating shear-oriented polyethylene oxide (PEO) filler. The synergistic interactions among GelMA, PEO, and SA yield a homogeneous mixture conducive to the printing of biomimetic 3D constructs with anisotropic micropores. These anisotropic micropores, along with the biochemical cues provided by the GelMA/PEO/SA scaffolds, enhance the oriented spreading and organization of fibroblasts. The resultant spread and aligned cellular morphologies promote the transition of fibroblasts into myofibroblasts. By co-culturing human keratinocytes on the engineered dermal layer, we successfully create a bilayer skin construct, wherein the keratinocytes establish tight junctions accompanied by elevated expression of cytokeratin-14, while the fibroblasts display a highly spread morphology with increased fibronectin expression. The printed hydrogels accelerate full-thickness wound closure by establishing a bioactive microenvironment that mitigate inflammation and stimulate angiogenesis, myofibroblast transition, and extracellular matrix remodeling. This anisotropic hydrogel demonstrates substantial promise for applications in skin tissue engineering.

Environmental sustainability and waste conversion of Prosopis juliflora fibre-reinforced ZnO nanofiller particulates PLA composite- mechanical and thermal analysis

The presence of large quantities of Prosopis juliflora (PJ) fibers in natural habitats presents substantial threats to the environment and economies of numerous developing countries. Utilizing natural fibers in polymer composites can effectively enhance their characteristics. The primary objective of this study is to create a composite material by combining Prosopis Juliflora (PJ) fiber with a polylactic matrix that has been combined with zinc oxide nanofillers. The fabrication process will involve the hand layup technique. In order to have a comprehensive understanding of the mechanical characteristics, thermal behavior, and thermal stability of the PJ composite, it is necessary to undertake additional investigations. The results showed that the inclusion of zinc oxide filler enhanced the tensile strength (67.29 MPa), flexural strength (64.27 MPa), compressive strength (56.79 MPa), and impact energy (34 J) in sample S5. Additionally, the thermal properties, including thermal conductivity, thermal expansion, and short-term heat resistant capacity, were also improved by the addition of zinc oxide filler in sample S5. The deterioration temperature of the PJ composite was determined to be between 312 and 342 °C using thermogravimetric analysis. The failure mode of the PJ composite was investigated using scanning electron microscopy.

Recycling of Marble Sludge into High Strength and Anti-Efflorescence Geopolymers Through the Synergy of Graphene Oxide and Hydrophobic SiO2 Fillers

Recycling of Marble Sludge into High Strength and Anti-Efflorescence Geopolymers Through the Synergy of Graphene Oxide and Hydrophobic SiO2 Fillers

Analyzing the impact of TiO2 filler on the wear characteristics of flax fiber-reinforced epoxy composite using the Taguchi approach

Purpose This study aims to investigate the impact of titanium oxide (TiO2) filler on the coefficient of friction (COF) and specific wear rate (SWR) in flax fiber reinforced epoxy composites (FFRCs) under abrasive wear conditions utilizing the Taguchi approach. The primary objective is to enhance wear resistance and promote the development of sustainable materials for various applications. Design/methodology/approach Epoxy/flax composites with varying TiO2 filler content (0–8 wt%) are fabricated through the hand layup method. Subsequently, wear testing is conducted following ASTM G99-05 standards. The Taguchi design of experiments (DOE) and analysis of variance (ANOVA) are utilized for statistical analysis. Findings Results indicate a significant improvement in abrasive wear properties with the incorporation of TiO2 filler. The COF is found to be most influenced by the normal load (55.19%), followed by grit size, wt% TiO2 filler and sliding distance. SWR is found to be most influenced by the grit size (42.92%), followed by wt% TiO2, normal load and sliding distance. Notably, the Taguchi model aligns well with experimental results, demonstrating its efficacy in predicting the abrasive wear behavior of FFRCs. Originality/value This research introduces a novel hybrid composite that combines TiO2 filler and flax fibers, showcasing their potential to enhance the tribological properties of epoxy composites. The study offers valuable insights into optimizing abrasive wear test variables in natural fiber-reinforced composites using Taguchi DOE and ANOVA, crucial for improving the performance of sustainable materials in engineering applications.

Sensitive strain sensors with wide-range detection and high stability for intelligent human motion monitoring

Miniaturized wearable electronic devices with strain sensors as core sensing elements hold significant applications in health monitoring and human-machine interaction. However, it remains a challenge to develop strain sensors with optimal response linearity, a wide detection range, and stability. In this study, to satisfy the above requirements, we construct high-performance wearable strain sensors (rGO-CNTOH@PSE) by a strategy of hybridizing conductive fillers with stretchable substrates. In detail, a synergistic conductive network is developed by adopting OH-containing carbon nanotube (CNTOH) and reduced graphene oxide (rGO) fillers with an appropriate mass ratio. After the network is integrated into a porous silicone elastomer substrate formed by the salt templating method, the developed strain sensor exhibits distinct resolution, consistent repeatability, and superior response linearity across a wide strain detection range of 0.3–303.03 %. Furthermore, the sensor also maintains good response stability over 15000 cycles of strain. We also demonstrate that this strain sensor showing outstanding exceptional detection performance has the capability for full-range human motion detection. A wireless smart electronic glove is developed based on the sensor, which can accurately recognize gesture movements and control a bionic robotic hand to replicate human hand actions, offering the potential for replacing manual tasks (such as, grasping in hazardous environments) in the future.

An ultrathin and robust single-ion conducting interfacial layer for dendrite-free lithium metal batteries

The practical application of rechargeable lithium metal batteries (LMBs) encounters significant challenges due to the notorious dendrite growth triggered by uneven Li deposition behaviors. In this work, a mechanically robust and single-ion-conducting interfacial layer, fulfilled by the strategic integration of flexible cellulose acetate (CA) matrix with rigid graphene oxide (GO) and LiF fillers (termed the CGL layer), is rationally devised to serve as a stabilizer for dendrite-free lithium (Li) metal batteries. The GCL film exhibits favorable mechanical properties with high modulus and flexibility that help to relieve interface fluctuations. More crucially, the electron-donating carbonyl groups (C=O) enriched in GCL foster a strengthened correlation with Li+, which availably aids the Li+ desolvation process and expedites facile Li+ mobility, yielding exceptional Li+ transference number of 0.87. Such single-ion conductive properties regulate rapid and uniform interfacial transport kinetics, mitigating the growth of Li dendrites and the decomposition of electrolytes. Consequently, stable Li anode with prolonged cycle stabilities and flat deposition morphologies are realized. The Li||LiFePO4 full cells with CGL protective layer render an outstanding cycling capability of 500 cycles at 3 C, and an ultrahigh capacity retention of 99.99% for over 220 cycles even under harsh conditions. This work affords valuable insights into the interfacial regulation for achieving high-performance LMBs.

A comprehensive review on active chain density evaluation from swelling and insights for better accounting for insoluble particles

AbstractThe present study provides a state of the art on methods for evaluating active chain density of rubbers from swelling experiments. This review focuses more particularly on the effects of components that are known to limit the swelling, and which typically results in an overestimation of the active chain density. These components are commonly considered as insoluble. Different corrections dealing with the two principal insoluble components, namely zinc oxide (Zn0) and carbon black (CB) filler, are thoroughly investigated. A comparative study on the same natural rubber (NR), either filled and unfilled, vulcanized with three different vulcanization systems, is performed to evaluate the relevance of each predictive approach. The results obtained highlight their respective limitations. In particular, it is shown that the swelling ratio of unfilled and filled natural rubbers are linearly related, suggesting that fillers have no significant effect on the overall number of cross‐links formed during vulcanization. As a result, we propose a unified approach for correcting the ZnO content for unfilled NR and both the ZnO and CB contents for filled NR. By comparing with results issued from uniaxial tensile tests, it is shown that the use of a mechanical response is a relevant alternative for determining the active chain density.

Testing and Evaluation of Hybrid Polymer Composites Reinforced with Moringa oleifera and Boehmeria nivea Fibers, Embedded with Copper Oxide Particulates, for Thermal, Structural, and Biological Properties

Abstract The increasing need for sustainable materials in industrial applications has prompted a significant shift in attention from synthetic to natural fibers. This study examines the problems and opportunities arising from the utilization of natural fiber-reinforced polymer composites in several industrial sectors. The objective of this work is to fabricate a hybrid composite using a conventional hand layup technique with natural reinforcement of Moringa oleifera (MO) and ramie (Boehmeria nivea) fibers, an epoxy matrix blended with copper oxide filler, utilized to enhance material stability and antimicrobial activity. To quantify the effect of five different weight fractions of MO and ramie fibers on this hybrid composite, its mechanical, thermal, functional, and antifungal properties were examined. The superior tensile strength (61.34 MPa), flexural strength (64.78 MPa), and impact energy (23 J) results indicate that ramie fiber loading should be increased. Additionally, enhanced thermal properties such as thermal conductivity (0.93 W/mK), heat deflection temperature (97°C), thermal expansion coefficient (1.7210−5/°C), and maximal thermal stability were observed at 347°C as a result of the increased ramie fiber loading. This analysis demonstrates that this hybrid composite possesses the antifungal activity necessary to form an inhibition zone against Candida albicans. Scanning electron microscopy analysis was conducted to determine the hybrid composites’ bonding strength and failure mode.

New Insights into the Application of Biocompatible (Un)Modified TiO2 and TiO2-ZrO2 Oxide Fillers in Light-Curing Materials.

A novel UV-light-curable poly(ethylene glycol) diacrylate matrix composite material with unmodified and methacryloxyl-grafted TiO2 and TiO2-ZrO2 systems was developed and tested as a potential coating material for medical components. The main goal of the research was to evaluate how the addition of (un)modified inorganic oxide fillers affects the properties of the composition (viscosity, UV/Vis spectra), the kinetics of photocuring (photo-DSC), and the morphological (SEM), physicochemical, and thermal properties (DSC, TGA) of the resulting composites. The applied filler functionalization process decreased their polarity and changed their size, BET surface area, and pore volume, which influenced the viscosity and kinetics of the photocurable system. In addition, the addition of synthesized fillers reduced the polymer's glass transition temperature and increased its thermal stability. It was also observed that additional UV irradiation of the tested composite changed its surface, resulting in hydrophobic properties (with the addition of 7 wt.% filler, an increase in the contact angle by more than 45% was observed).

Effect of graphene nanoplatelets and nano zinc oxide on gas barrier and antibacterial properties of thermoplastic nanocomposites

AbstractGraphene‐loaded thermoplastic nanocomposite films must be evaluated for antibacterial activity, mechanical, and barrier properties before being utilized as food packaging. Herein, economically feasible linear low‐density polyethylene (LLDPE)‐based flexible packaging materials were developed via the melt compounding technique at 170°C temperature by taking advantage of both graphene nanoplatelets (GNP) and nano zinc oxide (ZnO) fillers. Morphological studies reveal that in composites loaded with GNP/ZnO hybrid fillers, ZnO nanoparticles form a network‐like structure throughout the polymer matrix. Simultaneously, GNPs are uniformly dispersed. The inclusion of hybrid nanofiller considerably reduces both the oxygen transmission rate and the water vapor transmission rate (WVTR) in LLDPE nanocomposites. A maximum decrease of 36% and 67%, respectively, in both oxygen transmission rate and WVTR is observed for 3 wt% of hybrid filler loading in a thermoplastic matrix containing 1 wt% of nano ZnO. The antibacterial efficacy of the derived nanocomposite films is obvious against gram‐positive (Bacillus subtilis) and gram‐negative (Escherichia coli) bacterial strains. These nanocomposite films have the potential to be successfully utilized as flexible packaging materials owing to their improved thermal, barrier, and antibacterial effectiveness.Highlights GNP/ZnO was used as a hybrid reinforcing filler in the LLDPE matrix. ZnO nanoparticles establish a network‐like morphology. LLDPE nanocomposite films exhibited excellent antibacterial activity. Oxygen and water vapor barrier properties were significantly improved. The thermoplastic composite films could be used as food packaging materials.

Molecular dynamics simulations of 2D-layered graphene sheets with tandem repeat proteins

Composites with well-ordered and precisely designed molecular structures have the potential to showcase extraordinary physical properties. A high degree of order in the composite's molecular structure can lead to remarkable properties, such as high strength, stiffness, and toughness. Two-dimensional (2D) materials with atomic thickness are used in composites, but their random distribution within the matrix makes it hard to create highly ordered materials. We studied the mechanical properties of newly developed 2D nanosheets of graphene oxide fillers combined with recombinant squid-inspired tandem repeat proteins. Our results showed that these proteins enable precise molecular length and structure control, resulting in consistent mechanical properties that align with the experimental studies. As a result, the mechanical properties of the composite scale linearly based on the number of repeat units in the tandem proteins. This innovation pushes the boundaries of materials engineering and opens up a future where we can engineer the physical properties of composites to achieve the desired levels of mechanical strength and flexibility.

Enhancing gamma and neutron radiation shielding efficiency of LDPE/PVC polymers using cobalt, aluminum, and magnesium oxide fillers

A procedure for creating and assessing LDPE/PVC polymers using Co, Al, and Mg oxides as fillers for use as radiation shielding material was conducted. The SEM/EDX equipment was utilized for elemental analysis and mapping in order to visually represent the morphology of the produced polymers. The characterizations indicate that the MgCo2O4 particles possess an irregular and tiny morphology, displaying a spherical form with an average diameter of less than 100 nm. In addition, the Al2CoO4 particles are characterized as being aggregated, diminutive, and exhibiting a spherical morphology, with an average diameter of less than 150 nm. The current study involved experimental investigation, simulation using FLUKA-MC code, and theoretical calculations using Phy-X-PSD code to examine the radiological properties of the shielding material. The results depend on several factors, including the half-value layer (HVL), the effective atomic number (Zeff), the effective electron number (Neff), the effective conductivity (Ceff), the exposure buildup factor (EBF), the energy-absorption buildup factor (EABF), and the fast neutron macroscopic removal cross-section (FNRC). The SR-NIEL-7 platform has been utilized to compute the mass-stopping power for protons (H+) and alpha particles (He++) based on their kinetic energy. The experimental findings indicate that the density of LDPE/PVC filled with MgCo2O4 is greater than that of Al2CoO4. Furthermore, polymer filled with MgCo2O4 exhibits higher values for MAC, LAC, and FNRCs than Al2CoO4 filler. The measured LAC and MAC conform to the simulated values.

Improvement in non‐linear electrical conductivity of silicone rubber by incorporating zinc oxide fillers and grafting small polar molecules

AbstractSilicone rubber (SiR) is commonly used in reinforced insulation parts for high‐voltage direct current (HVDC) cable accessories due to its excellent insulation, elasticity, and high‐temperature resistance. HVDC cable accessories always suffer from the local electric field concentration due to the electrical conductivity mismatch between reinforced insulation and main insulation, which can ultimately lead to electric breakdown. The non‐linear conductive composites based on SiR have the ability to adaptively adjust the distribution of the electric field in cable accessories. This is expected to solve the problem of localised electric field concentration. The zinc oxide (ZnO) and glycidyl methacrylate (GMA) are used as fillers and grafted modifier respectively to improve the non‐linear electrical conductivity of ZnO/SiR‐GMA composites. The results indicate that grafting GMA can increase electrical conductivity of SiR, while doping ZnO filler enables SiR to have non‐linear conductivity characteristics. The combination of doping and grafting modification of the composites achieves excellent non‐linear conductive properties at lower ZnO filler content. Additionally, the mechanical properties of the modified composites are enhanced. The simulation results indicate that ZnO/SiR‐GMA is the most effective material for homogenising the electric field when used as reinforced insulation for cable intermediate joints.

CO2 separation performance and thermo-mechanical characteristics of mixed matrix membranes composed of polyvinylidene fluoride/hyperbranched polyethylenimine embedded with zinc oxide/graphene oxide filler

CO2 separation performance and thermo-mechanical characteristics of mixed matrix membranes composed of polyvinylidene fluoride/hyperbranched polyethylenimine embedded with zinc oxide/graphene oxide filler

Physicochemical and Adsorption Characterization of Char Derived from Resorcinol-Formaldehyde Resin Modified with Metal Oxide/Silica Nanocomposites.

A series of metal- and silica-containing carbon-based nanocomposites were synthesized by pyrolysis of a resorcinol-formaldehyde polymer modified with metal oxide/silica nanocomposites (MxOy/SiO2, where M = Mg, Mn, Ni, Cu and Zn) via the thermal oxidative destruction of metal acetates adsorbed on highly dispersed silica (A380). The concentration of metals was 3.0 mmol/g SiO2. The phase composition and morphological, structural and textural properties of the carbon materials were analyzed by X-ray diffraction, SEM, Raman spectroscopy and low-temperature N2 adsorption. Thermal decomposition under a nitrogen atmosphere and in air was analyzed using TG-FTIR and TG-DTG-DSC techniques to determine the influence of the filler on the decomposition process. The synthesized composites show mesoporous structures with high porosity and narrow pore size distributions. It could be shown that the textural properties and the final composition of the nanocomposites depend on the metal oxide fillers of the precursors. The data obtained show that nickel and copper promote the degree of graphitization and a structural order with the highest porosity and largest specific surface area of the hybrid composites. The good adsorption properties of the obtained materials were shown for the recovery of p-chlorophenol and p-nitrophenol from aqueous solutions.

Physico-electrical properties of starch-based bioplastic enhanced with acid-treated cellulose and graphene oxide fillers

Biopolymer composites represent an emerging alternative to petroleum-derived polymers for applications in electronic devices. Cellulose from Luffa cylindrical was treated with acid, and graphene oxide was produced from waste battery rod graphite. The two products were characterized using FTIR, SEM, TGA and XRD. After that, starch-based bioplastic films with varying amounts of acid-treated cellulose (ALC-cellulose) and graphene oxide (GO) as fillers were prepared, and the physical and electrical properties were determined. XRD data revealed a crystallinity of 62% for the ALC-cellulose and 52% for the cellulose precursor. GO had a d-spacing of 0.76 nm compared to 0.29 nm for battery-sourced graphite. TEM micrograph analyses revealed an average fibre diameter of 44.7 nm for acid-treated cellulose and 99.7 nm for cellulose. The density, thickness, opacity, and tensile strength of the bioplastic films increased from 1.31 to 1.44 g/cm3, 0.21–0.48 mm, 14.78–38.64, and 0.98–1.42 MPa, respectively, while the moisture content, swelling ability, and porosity reduced, with an increase in percentage composition of the filler materials. The dielectric constant and conductivity increased from 50.3 to 6965.2 and 0.0036–0.0147 S/m with an increase in percentage composition of the filler materials except for Filmcr4, which showed a drop in dielectric constant (3033.73) and conductivity (0.0074 S/m). Overall, this study has demonstrated that bioplastic filler materials can be sourced from waste materials and that these fillers improved the starch-based bioplastic film's physical and electrical properties.

Modeling and analysis of TiO2 filler's impact on specific wear rate in flax fiber-reinforced epoxy composite under abrasive wear using Taguchi approach

PurposeThis study explores how titanium oxide (TiO2) filler influences the specific wear rate (SWR) in flax fiber-reinforced epoxy composites (FFRCs) through a Taguchi approach. It aims to boost abrasive wear resistance by incorporating TiO2 filler, promoting sustainable and eco-friendly materials.Design/methodology/approachThis study fabricates epoxy/flax composites with TiO2 particles (0–8 wt%) using hand layup. Composites were tested for wear following American Society for Testing and Materials (ASTM) G99-05. Statistical analysis used Taguchi design of experiments (DOE), with ANOVA identifying key factors affecting SWR in abrasive sliding conditions.FindingsThe study illuminates how integrating TiO2 filler particles into epoxy/flax composites enhances abrasive wear properties. Statistical analysis of SWR highlights abrasive grit size (grit) as the most influential factor, followed by normal load, wt% of TiO2 and sliding distance. Grit size has the highest effect at 43.78%, and wt% TiO2 filler contributes 15.61% to SWR according to ANOVA. Notably, the Taguchi predictive model closely aligns with experimental results, validating its reliability.Originality/valueThis paper integrates TiO2 filler and flax fibers to form a novel hybrid composite with enhanced tribological properties in epoxy composites. The use of Taguchi DOE and ANOVA offers valuable insights for optimizing control variables, particularly in natural fiber-reinforced composites (NFRCs).

Application of iron-manganese oxide fillers in bioretention facility: Enhanced removal of antibiotics and conventional contaminants

Bioretention facilities are common source reduction facilities, but traditional fillers are not effective in reducing emerging contaminants such as antibiotics. Although Fe-Mn oxides have been extensively explored, their removal of emerging contaminants and application in the sponge city have not yet been addressed. Therefore, this study aims to address this limitation by developing Fe-Mn oxide fillers. In this research, the optimal preparation conditions (Fe/Mn mole ratio, polyvinyl alcohol (PVA) concentration, and filler particle size) and influencing factors (filler dosage, initial pollutant concentration, pH, temperature, and co-existing ions) were investigated using a typical antibiotic, norfloxacin (NOR), as the target contaminant. The removal mechanism of NOR was investigated by SEM, FTIR, and XPS characterizations. Subsequently, the fillers were applied to bioretention facilities with different filling modes (layered and mixed) to evaluate their effectiveness in removing NOR and conventional pollutants at different recurrence periods, drought periods, and pollutant influent concentrations. The study indicated that Fe-Mn oxide filler (Fe/Mn mole ratio of 4:1, PVA concentration of 7 %, particle size of 4 mm) could remove more than 70 % of NOR (1–20 mg/L). The NOR removal by Fe-Mn oxide filler involved adsorption and redox reactions. Notably, bioretention facilities using Fe-Mn oxide fillers have shown varying degrees of improvement in the removal of NOR and conventional pollutants compared to conventional ones. This study contributes to the application of Fe-Mn oxide filler in bioretention facilities, thus playing a crucial role in mitigating antibiotic pollution in stormwater runoff.