Oxidative Cross-coupling Reaction Research Articles

Electrochemically Enable N-Sulfenylation/Phosphinylation of Sulfoximines via Oxidative Dehydrocoupling Reaction.

An electrochemical oxidative cross-coupling strategy for the synthesis of N-sulfenylsulfoximines from sulfoximines and thiols was accomplished, giving diverse N-sulfenylsulfoximines in moderate to good yields. Moreover, this strategy can be extended to construct the N-P bond of N-phosphinylated sulfoximines. With electrons as reagents, the oxidative dehydrogenation cross-coupling reaction proceeds smoothly in the absence of traditional redox reagents.

Electrochemical Direct Synthesis of N-Sulfenylimines from Amines in the Presence of Thiophenols.

N-Sulfenylimines are important molecules owing to their value in organic synthesis. Herein, we developed an electrochemical oxidative cross-coupling reaction between amines and thiols to synthesize N-sulfenylimines without a transition-metal catalyst and external oxidant. Various amines and thiols were compatible, generating the desired products in up to 86% yield.

Reversible modulation of interlayer stacking in 2D copper-organic frameworks for tailoring porosity and photocatalytic activity

The properties of two-dimensional covalent organic frameworks (2D COFs), including porosity, catalytic activity as well as electronic and optical properties, are greatly affected by their interlayer stacking structures. However, the precise control of their interlayer stacking mode, especially in a reversible fashion, is a long-standing and challenging pursuit. Herein, we prepare three 2D copper-organic frameworks, namely JNM-n (n = 7, 8, and 9). Interestingly, the reversible interlayer sliding between eclipsed AA stacking (i.e., JNM-7-AA and JNM-8-AA) and staggered ABC stacking (i.e., JNM-7-ABC and JNM-8-ABC) can be achieved through environmental stimulation, which endows reversible encapsulation and release of lipase. Importantly, JNM-7-AA and JNM-8-AA exhibit a broader light absorption range, higher charge-separation efficiency, and higher photocatalytic activity for sensitizing O2 to 1O2 and O2•− than their ABC stacking isostructures. Consequently, JNM-8-AA deliver significantly enhanced photocatalytic activities for oxidative cross-coupling reactions compared to JNM-8-ABC and other reported homogeneous and heterogeneous catalysts.

K2S2O8-mediated direct C-H heteroarylation/hydroxylation of indolin-2-ones with quinoxalin-2(1H)-ones.

Herein, a K2S2O8-mediated direct heteroarylation and hydroxylation reaction between quinoxalin-2(1H)-ones with a C(sp2)-H bond and indolin-2-ones with a C(sp3)-H bond via an oxidative cross-coupling reaction has been reported. We have successfully established a feasible and concise reaction system that represents the first example of free-radical-promoted heteroarylation and hydroxylation reaction on the C-3 position of oxindole. A series of 3-substituted 3-hydroxyoxindoles are obtained in 0-83% yield using this methodology.

Copper-Catalyzed Benzylic C-H Cross-Coupling Enabled by Redox Buffers: Expanding Synthetic Access to Three-Dimensional Chemical Space.

ConspectusCross-coupling methods are the most widely used synthetic methods in medicinal chemistry. Existing reactions are dominated by methods such as amide coupling and arylation reactions that form bonds to sp2-hybridized carbon atoms and contribute to the formation of "flat" molecules. Evidence that three-dimensional structures often have improved physicochemical properties for pharmaceutical applications has contributed to growing demand for cross-coupling methods with sp3-hybridized reaction partners. Substituents attached to sp3 carbon atoms are intrinsically displayed in three dimensions. These considerations have led to efforts to establish reactions with sp3 cross-coupling partners, including alkyl halides, amines, alcohols, and carboxylic acids. As C(sp3)-H bonds are much more abundant that these more conventional coupling partners, we have been pursuing C(sp3)-H cross-coupling reactions that achieve site-selectivity, synthetic utility, and scope competitive with conventional coupling reactions.In this Account, we outline Cu-catalyzed oxidative cross-coupling reactions of benzylic C(sp3)-H bonds with diverse nucleophilic partners. These reactions commonly use N-fluorobenzenesulfonimide (NFSI) as the oxidant. The scope of reactivity is greatly improved by using a "redox buffer" that ensures that the Cu catalyst is available in the proper redox state to promote the reaction. Early precedents of catalytic Cu/NFSI oxidative coupling reactions, including C-H cyanation and arylation, did not require a redox buffer, but reactions with other nucleophiles, such as alcohols and azoles, were much less effective under similar conditions. Mechanistic studies show that some nucleophiles, such as cyanide and arylboronic acids, promote in situ reduction of CuII to CuI, contributing to successful catalytic turnover. Poor reactivity was observed with nucleophiles, such as alcohols, that do not promote CuII reduction in the same manner. This insight led to the identification of sacrificial reductants, termed "redox buffers", that support controlled generation of CuI during the reactions and enable successful benzylic C(sp3)-H cross-coupling with diverse nucleophiles. Successful reactions include those that feature direct coupling of (hetero)benzylic C-H substrates with coupling partners (alcohols, azoles) and sequential C(sp3)-H functionalization/coupling reactions. The latter methods feature generation of a synthetic linchpin that can undergo subsequent reaction with a broad array of nucleophiles. For example, halogenation/substitution cascades afford benzylic amines, (thio)ethers, and heterodiarylmethane derivatives, and an isocyanation/amine-addition sequence generates diverse benzylic ureas.Collectively, these Cu-catalyzed (hetero)benzylic C(sp3)-H cross-coupling reactions rapidly access diverse molecules. Analysis of their physicochemical and topological properties highlights the "drug-likeness" and enhanced three-dimensionality of these products relative to existing bioactive molecules. This consideration, together with the high benzylic C-H site-selectivity and the broad scope of reactivity enabled by the redox buffering strategy, makes these C(sp3)-H cross-coupling methods ideally suited for implementation in high-throughput experimentation platforms to explore novel chemical space for drug discovery and related applications.

Ligand-Mediated Regulation of the Chemical/Thermal Stability and Catalytic Performance of Isostructural Cobalt(II) Coordination Polymers.

Regulating the chemical/thermal stability and catalytic activity of coordination polymers (CPs) to achieve high catalytic performance is topical and challenging. The CPs are competent in promoting oxidative cross-coupling, yet they have not received substantial attention. Here, the ligand effect of the secondary ligand of CPs for oxidative cross-coupling reactions was investigated. Specifically, four new isostructural CPs [Co(Fbtx)1.5(4-R-1,2-BDC)]n (denoted as Co-CP-R, Fbtx = 1,4-bis(1,2,4-triazole-1-ylmethyl)-2,3,5,6-tetrafluorobenzene, 4-R-1,2-BDC = 4-R-1,2-benzenedicarboxylate, R = F, Cl, Br, CF3) were prepared. It was found that in the reactions of oxidative amination of benzoxazoles with secondary amines and the oxidative coupling of styrenes with benzaldehydes, both the chemical and thermal stabilities of the four Co-CPs with the R group followed the trend of -CF3 > -Br > -Cl > -F. Density functional theory (DFT) calculations suggested that the difference in reactivity may be ascribed to the effect of substituent groups on the electron transition energy of the cobalt(II) center of these Co-CPs. These findings highlight the secondary ligand effect in regulating the stability and catalytic performance of coordination networks.

Exploring the Diverse Landscape of Biaryl-Containing Peptides Generated by Cytochrome P450 Macrocyclases.

Cytochrome P450 enzymes (P450s) catalyze diverse oxidative cross-coupling reactions between aromatic substrates in the natural product biosynthesis. Specifically, P450s install distinct biaryl macrocyclic linkages in three families of ribosomally synthesized and post-translationally modified peptides (RiPPs). However, the chemical diversity of biaryl-containing macrocyclic RiPPs remains largely unexplored. Here, we demonstrate that P450s have the capability to generate diverse biaryl linkages on RiPPs, collectively named "cyptides". Homology-based genome mining for P450 macrocyclases revealed 19 novel groups of homologous biosynthetic gene clusters (BGCs) with distinct aromatic residue patterns in the precursor peptides. Using the P450-modified precursor peptides heterologously coexpressed with corresponding P450s in Escherichia coli, we determined the NMR structures of three novel biaryl-containing peptides─the enzymatic products, roseovertin (1), rubrin (2), and lapparbin (3)─and confirmed the formation of three unprecedented or rare biaryl linkages: Trp C-7'-to-His N-τ in 1, Trp C-7'-to-Tyr C-6 in 2, and Tyr C-6-to-Trp N-1' in 3. Biochemical characterization indicated that certain P450s in these pathways have a relaxed substrate specificity. Overall, our studies suggest that P450 macrocyclases have evolved to create diverse biaryl linkages in RiPPs, promoting the exploration of a broader chemical space for biaryl-containing peptides encoded in bacterial genomes.

Bismuth(III)-Catalyzed Oxidative Cross-Coupling of 3-Hydroxycarbazoles with Arenols under an Oxygen Atmosphere.

A Bi(OTf)3-catalyzed oxidative cross-coupling reaction of 3-hydroxycarbazoles with arenols was developed under mild conditions. Both substrates were used in a 1:1 molar ratio in the presence of a catalytic amount of Bi(OTf)3. The reaction was carried out under an oxygen atmosphere at 30 °C to afford C1-symmetric hydroxybiaryls in good yields (up to 94%) with high chemo- and regioselectivity.

Direct conversion of lignin to functionalized diaryl ethers via oxidative cross-coupling

Efficient valorization of lignin, a sustainable source of functionalized aromatic products, would reduce dependence on fossil-derived feedstocks. Oxidative depolymerization is frequently applied to lignin to generate phenolic monomers. However, due to the instability of phenolic intermediates, repolymerization and dearylation reactions lead to low selectivity and product yields. Here, a highly efficient strategy to extract the aromatic monomers from lignin affording functionalized diaryl ethers using oxidative cross-coupling reactions is described, which overcomes the limitations of oxidative methods and affords high-value specialty chemicals. Reaction of phenylboronic acids with lignin converts the reactive phenolic intermediates into stable diaryl ether products in near-theoretical maximum yields (92% for beech lignin and 95% for poplar lignin based on the content of β−O−4 linkages). This strategy suppresses side reactions typically encountered in oxidative depolymerization reactions of lignin and provides a new approach for the direct transformation of lignin into valuable functionalized diaryl ethers, including key intermediates in pharmaceutical and natural product synthesis.

Enantioselective Oxidative Enolate Coupling of Oxindoles Catalyzed by Chiral Guanidinium Hypoiodite

Hypoiodite is an environmentally friendly oxidant that has been developed to drive a variety of bond-forming reactions. Recently, asymmetric oxidative bond-forming reactions using hypoiodite in the presence of chiral onium organocatalysts have been used to synthesize carbon–heteroatom bonds, but asymmetric carbon–carbon bond-forming reactions have not been reported. Herein, we present an oxidative enolate coupling reaction of oxindoles to provide optically active oxindole dimers bearing consecutive all-carbon quaternary stereogenic centers, using a chiral guanidinium hypoiodite catalyst. This reaction affords the corresponding homocoupling products with high enantioselectivity. We also describe oxidative enolate cross-coupling reactions of two oxindoles bearing electronically distinct substituents.

Electrochemical Regioselective C(sp2)-H Selenylation and Sulfenylation of Substituted 2-Amino-1,4-naphthoquinones.

A straightforward and efficient electrochemical method for regioselective C(sp2)-H selenylation and sulfenylation of substituted 2-amino-1,4-naphthoquinones has been unearthed. This oxidative cross-coupling reaction avoids using transition metal catalysts, oxidants, and high temperatures. The other notable advantages of this protocol are the tolerance of diverse functional groups, mild reaction conditions at ambient temperature, energy efficiency, good to excellent yields, short reaction times (in minutes), gram-scale applicability, and eco-friendliness.

Aqueous mediated iodine catalyzed C-N coupling followed by C-C coupling towards 5H-pyrazino[2,3-b]indoles.

Our study describes a new development featuring iodine-catalyzed two consecutive oxidative cross-coupling reactions involving Cα(sp3)-H of benzyl amines followed by intramolecular cyclization in water under air. Here, C-N coupling followed by C-C coupling occurs in a green environment to provide a variety of 5H-pyrazino[2,3-b]indoles within a short time period.

Copper-catalyzed α-selective cross-dehydrogenative coupling of BODIPY dyes with aldehydes: A new route to acylated BODIPYs and dipyrromethenes

A novel copper-catalyzed direct acylation of BODIPYs with aldehydes via C–H bond activation was developed, in which acyl radicals were formed from aldehydes in the presence of TBHP as radical initiator, and selectively reacted with BODIPYs at the α-positions. This radical oxidative dehydrogenative cross-coupling reaction showed excellent functional group tolerance, and both heteroaromatic and aliphatic aldehydes could be effectively reacted to BODIPYs. Comparing with those of the corresponding starting BODIPYs, those α-acylated BODIPYs showed red-shifted absorption and emission, as well as decreased both HOMO and LUMO energies due to the installation of electron-deficient carbonyl groups. Furthermore, the α-acylated BODIPY provided an efficient access to α-acylated dipyrrin by removal of the BF2 protecting groups, which showed sensitive and selective “turn-on” fluorescence response toward Zn2+ ion in aqueous buffer solution and living cells.

Homogeneous Gold Catalysis Using Complexes Recovered from Waste Electronic Equipment.

Despite the greater awareness of elemental sustainability and the benefits of the circular economy concept, much waste electrical and electronic equipment (WEEE) is still destined for landfill. Effective methods for valorizing this waste within our society are therefore imperative. In this contribution, two gold(III) complexes obtained as recovery products from WEEE and their anion metathesis products were investigated as homogenous catalysts. These four recovery products were successfully applied as catalysts for the cyclization of propargylic amides and the condensation of acetylacetone with o-iodoaniline. Impressive activity was also observed in the gold-catalyzed reaction between electron-rich arenes (2-methylfuran, 1,3-dimethoxybenzene, and azulene) and α,β-unsaturated carbonyl compounds (methyl vinyl ketone and cyclohexenone). These recovered compounds were also shown to be effective catalysts for the oxidative cross-coupling reaction of aryl silanes and arenes. When employed as Lewis acid catalysts for carbonyl-containing substrates, the WEEE-derived gold complexes could also be recovered at the end of the reaction and reused without loss in catalytic activity, enhancing still further the sustainability of the process. This is the first direct application in homogeneous catalysis of gold recovery products sourced from e-waste.

Pd-catalyzed Aerobic Cross-Dehydrogenative Coupling of Catechols with 2-Oxindoles and Benzofuranones: Reactivity Difference Between Monomer and Dimer.

Persistent radicals, which are generated from 2-oxindole or benzofuranone dimers, are useful tools for designing the radical-based cross-coupling reaction to provide molecules containing a quaternary carbon. The persistent radical is accessible from both the dimer and monomer; however, the reactivity difference between these substrates for the oxidative cross-coupling reaction is not fully understood, most likely because of the mechanistic complexity. Here, we present details of an aerobic cross-dehydrogenative coupling (CDC) reaction using various monomers and catechols. UV-Vis analysis and mechanistic control experiments showed that the monomer is less reactive than the dimer under aerobic conditions. Our Pd(II)-BINAP-μ-hydroxo complex significantly improved the reactivity of the monomers for the aerobic CDC reaction with catechols, yielding results comparable to those of the corresponding dimer. The procedure, which enables the generation of the persistent radical in situ, is particularly useful when employing the monomer that is not readily converted to the corresponding dimer.

Palladium catalyzed radical relay for the oxidative cross-coupling of quinolines

Traditional approaches for transition-metal catalyzed oxidative cross-coupling reactions rely on sp2-hybridized starting materials, such as aryl halides, and more specifically, homogeneous catalysts. We report a heterogeneous Pd-catalyzed radical relay method for the conversion of a heteroarene C(sp3)–H bond into ethers. Pd nanoparticles are supported on an ordered mesoporous composite which, when compared with microporous activated carbons, greatly increases the Pd d charge because of their strong interaction with N-doped anatase nanocrystals. Mechanistic studies provide evidence that electron-deficient Pd with Pd–O/N coordinations efficiently catalyzes the radical relay reaction to release diffusible methoxyl radicals, and highlight the difference between this surface reaction and C–H oxidation mediated by homogeneous catalysts that operate with cyclopalladated intermediates. The reactions proceed efficiently with a turn-over frequency of 84 h−1 and high selectivity toward ethers of >99%. Negligible Pd leaching and activity loss are observed after 7 catalytic runs.

Palladium-Catalyzed Organic Reactions Involving Hypervalent Iodine Reagents.

The chemistry of polyvalent iodine compounds has piqued the interest of researchers due to their role as important and flexible reagents in synthetic organic chemistry, resulting in a broad variety of useful organic molecules. These chemicals have potential uses in various functionalization procedures due to their non-toxic and environmentally friendly properties. As they are also strong electrophiles and potent oxidizing agents, the use of hypervalent iodine reagents in palladium-catalyzed transformations has received a lot of attention in recent years. Extensive research has been conducted on the subject of C—H bond functionalization by Pd catalysis with hypervalent iodine reagents as oxidants. Furthermore, the iodine(III) reagent is now often used as an arylating agent in Pd-catalyzed C—H arylation or Heck-type cross-coupling processes. In this article, the recent advances in palladium-catalyzed oxidative cross-coupling reactions employing hypervalent iodine reagents are reviewed in detail.

Biaryl Bond Formation Enabled by Biocatalytic Oxidative Cross-Coupling Reactions

Biaryl Bond Formation Enabled by Biocatalytic Oxidative Cross-Coupling Reactions

Biocatalytic oxidative cross-coupling reactions for biaryl bond formation.

Biaryl compounds, with two connected aromatic rings, are found across medicine, materials science and asymmetric catalysis1,2. The necessity of joining arene building blocks to access these valuable compounds has inspired several approaches for biaryl bond formation and challenged chemists to develop increasingly concise and robust methods for this task3. Oxidative coupling of two C-H bonds offers an efficient strategy for the formation of a biaryl C-C bond; however, fundamental challenges remain in controlling the reactivity and selectivity for uniting a given pair of substrates4,5. Biocatalytic oxidative cross-coupling reactions have the potential to overcome limitations inherent to numerous small-molecule-mediated methods by providing a paradigm with catalyst-controlled selectivity6. Here we disclose a strategy for biocatalytic cross-coupling through oxidative C-C bond formation using cytochrome P450 enzymes. We demonstrate the ability to catalyse cross-coupling reactions on a panel of phenolic substrates using natural P450 catalysts. Moreover, we engineer a P450 to possess the desired reactivity, site selectivity and atroposelectivity by transforming a low-yielding, unselective reaction into a highly efficient and selective process. This streamlined method for constructing sterically hindered biaryl bonds provides a programmable platform for assembling molecules with catalyst-controlled reactivity and selectivity.

Accessing Grignard Reluctant Aldehyde in 2-Oxoaldehyde by Organocuprates to Give [1,2] Addition and Oxidative Coupling Reactions.

Novel finding of aldehyde in 2-oxoaldehyde (2OA) is presented as it unprecedentedly disinclines to react with Grignard reagents but reacts with moderate organocuprate reagents in anaerobic condition to give [1,2] addition (α-hydroxyketones) reaction. In the presence of air, the reaction produces an efficient protocol for the synthesis of 1,2-diones through a copper-catalyzed oxidative cross-coupling reaction at room temperature. Mechanistic studies indicate that α-hydroxy ketone perhaps is generated before the hydrolysis step/acid work-up process. The α-keto group of 2OA causes to exhibit this peculiar aldehyde behavior toward these organometallic reagents.