Oxidative Stability Research Articles

Dilute Electrolytes with Fluorine-free Ether Solvents for 4.5 V Lithium Metal Batteries.

The limited oxidation stability of ether solvents has posed significant challenges for their applications in high-voltage lithium metal batteries (LMBs). To tackle this issue, the prevailing strategy either adopts a high concentration of fluorinated salts or relies on highly fluorinated solvents, which will significantly increase the manufacturing cost and create severe environmental hazards. Herein, an alternative and sustainable salt engineering approach is proposed to enable the utilization of dilute electrolytes consisting of fluorine (F)-free ethers in high-voltage LMBs. The proposed 0.8 M electrolyte supports stable lithium plating-stripping with a high Coulombic efficiency of 99.47% and effectively mitigates the metal dissolution, phase transition, and gas release issues of the LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode upon charging to high voltages. Consequently, the 4.5 V high-loading Li||NCM 811 cell shows a capacity retention of 75.2% after 300 cycles. Multimodal experimental characterizations coupled with theoretical investigations demonstrate that the boron-containing salt plays a pivotal role in forming the passivation layers on both anode and cathode. The present simple and cost-effective electrolyte design strategy offers a promising and alternative avenue for using commercially mature, environmentally benign, and low-cost F-free ethers in high-voltage LMBs.

Electromagnetic Interference Shielding and Joule Heating Properties of Flexible, Lightweight, and Hydrophobic MXene/Nickel-Coated Polyester Fabrics Manufactured by Dip-Dry Coating and Electroless Plating.

High-performance electromagnetic interference (EMI) shielding materials with high flexibility, low density, and hydrophobic surface are crucial for modern integrated electronics and telecommunication systems in advanced industries like aerospace, military, artificial intelligence, and wearable electronics. In this study, we present flexible and hydrophobic MXene/Ni-coated polyester (PET) fabrics featuring a double-layered structure, fabricated via a facile and scalable dip-dry coating process followed by electroless nickel plating. Increasing the dip-dry coating iterations up to 10 cycles boosts the MXene loading content (∼31 wt %) and electrical conductivity (∼86 S/cm) of MXene-coated PET fabrics, while maintaining constant porosity (∼95%). The addition of a Ni layer enhances hydrophobicity, achieving a high water contact angle of ∼114° compared to only MXene-coated PET fabrics (∼49°). Furthermore, the 30 μm thick MXene/Ni-coated PET fabric demonstrates superior electrical conductivity (∼113.8 S/cm) and EMI shielding effectiveness (∼35.7 dB at 8-12 GHz) compared to only MXene- or Ni-coated PET fabrics. The EMI shielding performance of the MXene/Ni-coated PET fabric remains more stable in an air environment than only MXene-coated fabrics due to the outer Ni layer with excellent hydrophobicity and oxidation stability. Additionally, the MXene/Ni-coated PET fabric exhibits impressive Joule heating performance, swiftly converting electrical energy into heat and reaching high steady-state temperatures (32-92 °C) at low applied voltages (0.5-1.5 V).

Stability and Surface Functionalization of Plasmonic Group 4 Transition Metal Nitrides

Plasmonic transition metal nitrides (TMNs) have emerged as a low‐cost and thermally and chemically robust alternatives to noble metals. While their superior thermal properties have been established, their chemical properties on the nanoscale haven’t been as well studied. Herein, the oxidative stability over time under ambient conditions and colloidal stability as function of pH was explored for plasmonic TiN, ZrN and HfN nanoparticles. It was discovered that the TMN nanoparticles made via solid‐state method had a narrow pH stability range between 2 – 3. Under highly acidic conditions, the particles underwent dissolution and at pH ≥ 4, they aggregate and precipitate from the solution. Additionally, TiN nanoparticles had poor oxidative stability and oxidized to TiO2 after ~40 days. 3‐Aminopropyltriethoxysilane (APTES) and dimethylsilane coated TMNs were synthesized to yield water and organic solvent dispersible particles, respectively. These functionalized colloidal suspensions showed enhanced oxidative stability over 60 days and the APTES coating widened the pH stability window of TMNs to include physiological pH. This study shows that surface functionalization using M–O–Si linkages (where M = Ti, Zr, or Hf) can greatly enhance the stability, dispersibility and therefore applicability of plasmonic TMN nanoparticles.

FATTY ACID PROFILE OF COMMON CARP (CYPRINUS CARPIO) AFTER ADDITION OF ASTAXANTHIN TO THE FEED MIXTURE

Astaxanthin is a very strong antioxidant typically fed to rainbow trout mainly to alter the color of its’ meat to red. In our study, we incorporate a relatively low concentration of astaxanthin into the diet of common carp to enhance the chemical parameters and oxidation stability of carp meat without altering the typical coloration of meat. Also, we observed the fatty acid profile of reared fish. We observed an increase in protein content in animals with astaxanthin dietary addition. It was not statistically significant, but we observed a lowering of fat content in experimental groups. Regarding lipid oxidation, we did not observe any significant effect of astaxanthin on malondialdehyde production in samples. Fatty acid profiles were determined by gas chromatography and then compared. Only significant differences were observed in stearic and arachidonic acid and in the experimental group with lower astaxanthin addition. Our results conclude that dietary astaxanthin has no adverse effect on fatty acid profile or oxidation stability during storage (at -18 °C). On the other hand, astaxanthin has the potential to enhance the protein and lower the fat content, even in low concentrations.

Fabrication and Characterization of Docosahexaenoic Acid Algal Oil Pickering Emulsions Stabilized Using the Whey Protein Isolate–High-Methoxyl Pectin Complex

In this study, the whey protein isolate–high-methoxyl pectin (WPI-HMP) complex prepared by electrostatic interaction was utilized as an emulsifier in the preparation of docosahexaenoic acid (DHA) algal oils in order to improve their physicochemical properties and oxidation stability. The results showed that the emulsions stabilized using the WPI-HMP complex across varying oil-phase volume fractions (30–70%) exhibited consistent particle size and enhanced stability compared to emulsions stabilized solely using WPI or HMP at different ionic concentrations and heating temperatures. Furthermore, DHA algal oil emulsions stabilized using the WPI-HMP complex also showed superior storage stability, as they exhibited no discernible emulsification or oil droplet overflow and the particle size variation remained relatively minor throughout the storage at 25 °C for 30 days. The accelerated oxidation of the emulsions was assessed by measuring the rate of DHA loss, lipid hydroperoxide levels, and malondialdehyde levels. Emulsions stabilized using the WPI-HMP complex exhibited a lower rate of DHA loss and reduced levels of lipid hydroperoxides and malondialdehyde. This indicated that WPI-HMP-stabilized Pickering emulsions exhibit a greater rate of DHA retention. The excellent stability of these emulsions could prove valuable in food processing for DHA nutritional enhancement.

Kinetic Insights into the Antioxidant Effect of Isatin-Thiosemicarbazone in Biodiesel Blends

Biodiesel has several drawbacks, such as being prone to oxidation, having reduced stability, and having limited storage time. Antioxidants compatible with biodiesel are being used to address its drawbacks. Utilizing antioxidants effectively improves the quality of biodiesel. Enhancing the quality of biodiesel for use as a clean energy source benefits both the global economy and ecology. Therefore, we believe that our work will contribute to the advancement of the biodiesel industry worldwide. This study used blends consisting of 20% biodiesel and 80% diesel fuel. Isatin-thiosemicarbazones were tested as additives in blends at a concentration of 3000 parts per million (ppm) using an oxifast device and were compared with the chemical antioxidant Trolox. FT-IR, DSC, and TGA were used to characterize these samples. DSC measured sample crystallization temperatures (Tc). Samples with antioxidants showed decreased values compared to the non-antioxidant diesel sample D100. Several DSC tests were conducted to determine the antioxidant strengths of various samples. The results show that the FT-IR spectrum’s antioxidant effect regions grow clearer with antioxidants. The extra antioxidant is effective. Biodiesel’s oxidative stability improves with isatin-thiosemicarbazones at varying concentrations. The kinetics of thermal decomposition of isatin-thiosemicarbazones under non-isothermal conditions were determined using the Kissinger, Ozawa, and Boswell techniques. The activation energies of compounds 1 and 2 were calculated as 137–147 kJ mol−1 and 173–183 kJ mol−1, respectively.

High-Voltage Long-Cycling All-Solid-State Lithium Batteries with High-Valent-Element-Doped Halide Electrolytes.

All-solid-state batteries (ASSBs) have garnered considerable attention as promising candidates for next-generation energy storage systems due to their potentially simultaneously enhanced safety capacities and improved energy densities. However, the solid future still calls for materials with high ionic conductivity, electrochemical stability, and favorable interfacial compatibility. In this study, we present a series of halide solid-state electrolytes (SSEs) utilizing a doping strategy with highly valent elements, demonstrating an outstanding combination of enhanced ionic conductivity and oxidation stability. Among these, Li2.6In0.8Ta0.2Cl6 emerges as the standout performer, displaying a superionic conductivity of up to 4.47 mS cm-1 at 30 °C, along with a low activation energy barrier of 0.321 eV for Li+ migration. Additionally, it showcases an extensive oxidation onset of up to 5.13 V (vs Li+/Li), enabling high-voltage ASSBs with promising cycling performance. Particularly noteworthy are the ASSBs employing LiCoO2 cathode materials, which exhibit an extended cyclability of over 1400 cycles, with 70% capacity retention under 4.6 V (vs Li+/Li), and a capacity of up to 135 mA h g-1 at a 4 C rate, with the loading of active materials at 7.52 mg cm-2. This study demonstrates a feasible approach to designing desirable SSEs for energy-dense, highly stable ASSBs.

Electronic Structure Modification of MnO2 Nanosheet Arrays with Enhanced Water Oxidation Activity and Stability by Nitrogen Plasma.

The strategic design of catalysts for the oxygen evolution reaction (OER) is crucial in tackling the substantial energy demands associated with hydrogen production in electrolytic water splitting. Despite extensive research on birnessite (δ-MnO2) manganese oxides to enhance catalytic activity by modulating Mn3+ species, the ongoing challenge is to simultaneously stabilize Mn3+ while improving overall activity. Herein, oxygen (O) vacancies and nitrogen (N) doping have been simultaneously introduced into the MnO2 through a simple nitrogen plasma approach, resulting in efficient OER performance. The optimized N-MnO2v electrocatalyst exhibits outstanding OER activity in alkaline electrolyte, reducing the overpotential by nearly 160 mV compared to pure pristine MnO2 (from 476 to 312 mV) at 10 mA cm-2, and a small Tafel slope of 89 mV dec-1. Moreover, it demonstrates excellent durability over a 122 h stability test. The introduction of O vacancies and incorporation of N not only fine-tune the electronic structure of MnO2, increasing the Mn3+ content to enhance overall activity, but also play a crucial role in stabilizing Mn3+, thereby leading to exceptional stability over time. Subsequently, density functional theory calculations validate the optimized electronic structure of MnO2 achieved through the two engineering methods, effectively lowering the intermediate adsorption free energy barrier. Our synergistic approach, utilizing nitrogen plasma treatment, opens a pathway to concurrently enhance the activity and stability of OER electrocatalysts, applicable not only to Mn-based but also to other transition metal oxides.

Evaluation of the efficacy of rice bran and sesame oil for producing nutritionally-superior quality functional tofu

Paneer prepared from edible-quality de-oiled soy flour is known as tofu. Functional tofu was augmented with specific antioxidants such as oryzanol and lignan obtained from rice bran oil (RBO) and sesame oil (SO), respectively. All the fortified and control tofu were evaluated for physicochemical (proximate composition, oxidative stability, antioxidant activity, penetration, and color property), microbiological, and sensory properties. The total viable count and yeast and mold counts increased slowly in the samples stored at 4 °C in the refrigerator for 9 days. Fortified tofu showed higher oxidative stability and antioxidant activity than the control tofu during storage conditions. Additionally, tartaric acid-coagulated tofu retained its quality attributes, especially taste and overall acceptability, during refrigerated storage. Functional tofu aided in an innovative technological technique for making functional non-dairy products with boosted healthy constituents.

The effects of the interaction between cyanidin‐3‐O‐glucoside (C3G) and walnut protein isolate (WPI) on the thermal and oxidative stability of C3G

The effects of the interaction between cyanidin‐3‐O‐glucoside (C3G) and walnut protein isolate (WPI) on the thermal and oxidative stability of C3G

Complex Hydride-Based Gel Polymer Electrolytes for Rechargeable Ca-Metal Batteries.

Rechargeable Ca batteries offer the advantages of high energy density, low cost, and earth-abundant constituents, presenting a viable alternative to lithium-ion batteries. However, using polymer electrolytes in practical Ca batteries is not often reported, despite its potential to prevent leakage and preserve battery flexibility. Herein, a Ca(BH4)2-based gel-polymer electrolyte (GPE) is prepared from Ca(BH4)2 and poly(tetrahydrofuran) (pTHF) and tested its performance in Ca batteries. The electrolyte demonstrates excellent stability against Ca-metal anodes and high ionic conductivity. The results of infrared spectroscopy and 1H and 11B NMR indicate that the terminal ─OH groups of pTHF reacted with BH4 - anions to form B─H─(pTHF)3 moieties, achieving cross-linking and solidification. Cyclic voltammetry measurements indicate the occurrence of reversible Ca plating/stripping. To improve the performance at high current densities, the GPE is supplemented with LiBH4 to achieve a lower overpotential in the Ca plating/stripping process. An all-solid-state Ca-metal battery with a dual-cation (Ca2+ and Li+) GPE, a Ca-metal anode, and a Li4Ti5O12 cathode sustained >200 cycles, confirming their feasibility. The results pave the way for further developing lithium salt-free Ca batteries by developing electrolyte salts with high oxidation stability and optimal electrochemical properties.

Characterization of biodiesel blends produced from repurpose used cooking oil

Characterising the fuel before it is used in an engine is necessary for a healthy fuel supply for an engine, just as a clean environment is necessary for a healthy life. Used cooking oil (UCO), a third-generation feedstock, is investigated for its physicochemical properties. To ascertain the blend's suitability as an alternative fuel, characterisation was conducted using GC-MS, thermogravimetric, infrared spectroscopy and element analysis. To enhance the characteristics the oxygenated additive (diethyl ether: DEE) was added at higher proportions. In accordance with Indian requirements, the impact of DEE on the physicochemical characteristics of biodiesel blends was examined (IS1448). Oleic acid keeps RUCO-B's fuel mixture well in terms of viscosity, ignition quality and oxidative stability. Sulphur-free technology on the RUCO-B eliminates sulphur oxide emissions automatically. The physical (density and viscosity), chemical (cetane number and calorific value) and cold flow (flash point, pour point and cloud point) characteristics of ternary blends were all enhanced by the addition of DEE. According to ASTM D975, the blend's 4% DEE surpasses the standard's acid value by 36%, potentially causing engine damage. In ternary blends, the DEE proportion (0.8, 1.6, 2.4 and 3.2%) enhances the cold flow, chemical and physical qualities.

Assessment and comparative analysis of the antioxidant capacity of some food waste for fish oils

The aim of the present study was to compare the antioxidant capacities of butylated hydroxyl anisole and tocopherol with polar extracts obtained from some food waste such as date seed, walnut shell, sesame hull, spent coffee and spent black tea. In pursuit of this objective, crude fish oil was employed as a control sample, with all extracts added at a concentration of 200 ppm, equivalent to BHA. The acid, peroxide, conjugated dien, viscosity, total chlorophyll and carotenoid contents in the fish oil were monitored during the storage period (60 days) at 25 °C and 35 °C. The date seed and walnut extracts presented higher antioxidants and oxidative stability than the others at the end of the storage period at both temperatures. The findings of the present study showed that the extracts obtained from food wastes/by-products could be evaluated as a natural source of antioxidants, especially for oils which are highly susceptible to oxidation.

Algal-biochar and Chlorella vulgaris microalgae: a sustainable approach for textile wastewater treatment and biodiesel production

Microalgae technology is a viable solution for environmental conservation (carbon capture and wastewater treatment) and energy production. However, the nutrient cost, slow-kinetics, and low biosorption capacity of microalgae hindered its application. To overcome them, algal-biochar (BC) can be integrated with microalgae to treat textile wastewater (TWW) due to its low cost, its ability to rapidly adsorb pollutants, and its ability to serve as a nutrient source for microalgal-growth to capture CO2 and biodiesel production. Chlorella vulgaris (CV) and algal-BC were combined in this work to assess microalgal growth, carbon capture, TWW bioremediation, and biodiesel production. Results showed the highest optical density (3.70 ± 0.07 OD680), biomass productivity (42.31 ± 0.50 mg L−1 d−1), and dry weight biomass production (255.11 ± 6.01 mg L−1) in an integrated system of CV-BC-TWW by capturing atmospheric CO2 (77.57 ± 2.52 mg L−1 d−1). More than 99% bioremediation (removal of MB-pollutant, COD, nitrates, and phosphates) of TWW was achieved in CV-BC-TWW system due to biosorption and biodegradation processes. The addition of algal-BC and CV microalgae to TWW not only enhanced the algal growth but also increased the bioremediation of TWW and biodiesel content. The highest fatty acid methylesters (biodiesel) were also produced, up to 76.79 ± 2.01 mg g−1 from CV-BC-TWW cultivated-biomass. Biodiesel’s oxidative stability and low-temperature characteristics are enhanced by the presence of palmitoleic (C16:1) and linolenic (C18:3) acids. Hence, this study revealed that the integration of algal-biochar, as a biosorbent and source of nutrients, with living-microalgae offers an efficient, economical, and sustainable approach for microalgae growth, CO2 fixation, TWW treatment, and biodiesel production.Graphical

Impact of red wine polyphenol carbon dots on the oxidative stability of oils

Red wine polyphenols carbon dots (P-CDs) with antioxidant properties were synthesized and extensively characterized to determine their size, morphology, and microstructure. Their potential to enhance oxidative stability in sunflower oil was thoroughly evaluated and compared with traditional antioxidants like butyl hydroxyanisole (BHA) and n-propyl gallate (PG). The P-CDs were found to be spherical nanoparticles, generally smaller than 10 nm, confirming their nanoscale characteristics. Further analysis revealed that the unique properties of the P-CDs were largely due to oxygen-containing functional groups and a highly defective graphite structure, providing them with distinct physical and chemical attributes. In scavenging tests with DPPH and ABTS radicals, P-CDs demonstrated outstanding performance, suggesting their promising application in the antioxidant field. Additionally, the P-CDs effectively inhibited the oxidative rancidity process in sunflower oil, offering a novel approach to improving oil's oxidative stability. A significant finding was that when 0.01% of red wine polyphenol carbon dots were added, they outperformed both BHA and PG in inhibiting the accumulation of anisidine, reducing total polar compound content, and preserving the oil's fatty acid composition, color, and viscosity. This discovery not only broadens the application scope for P-CDs in antioxidant research related to oils, but also supports their practical implementation in the food industry.

Enhancing oxidation stability of amine-containing CO2 adsorbents using hydroxyethyl starch

Amine-based adsorbents are widely used for CO2 capture. However, one of the biggest hurdles for their further development is their limited oxidation stability. Moreover, methods developed to improve the oxidation stability often lead to significant decrease in their CO2 uptake. Here, we investigated the effect of hydroxyethyl starch (HES) on the CO2 uptake and oxidation stability of impregnated polyethylenimine (PEI) adsorbents. Performance of HES-PEI co-impregnated materials was evaluated under different oxidation conditions using CO2 uptake measurements, and mass spectrometry. The effect of HES was compared with other hydroxyl-containing additives such as PVA and PEG, as well as to epoxide functionalization of PEI (EB-PEI). The oxidation stability of PEI upon addition of HES was found to be comparable to EB-PEI containing adsorbent; however, its CO2 uptake, based on PEI, was twice as high. In addition, oxidation stability of supported HES-PEI was significantly higher than unmodified PEI as well as PVA-PEI and PEG-PEI co-impregnated adsorbents.

Antioxidant Efficacy of Amino Acids on Vitamin A Palmitate Encapsulated in OSA-Starch Electrosprayed Core-Shell Microcapsules

The encapsulation and the oxidative stability of vitamin retinyl palmitate (AP), a vitamin A derivative, within coaxial electrosprayed (AP) core – octenyl succinic anhydride (OSA-modified starch) shell microcapsules were investigated. The antioxidant efficiency of amino acids (AAs) (namely histidine, leucine, valine, tryptophan, tyrosine, cysteine and lysine) added to the core, on the oxidative stability of AP was evaluated using differential scanning calorimetry at the isothermal temperature of 140 °C. Confocal microscopy confirmed the location of the AP within the core with AAs microcapsules, surrounded by the shell layer of OSA starch, and scanning electron microscopy revealed that the microcapsules are uniform in size with an average diameter ranging from 2.06 ± 1.05 to 2.41 ± 1.42 μm. The AAs contributed substantially to enhance the oxidative stability of AP, with histidine being the most efficient with an improvement in oxidative stability of about 214 times, while lysine showed the lowest protection (about 3.9 times), compared to non-encapsulated AP. For the encapsulated AP, the presence of histidine or lysine enhanced the oxidative stability of the vitamin by about 70.6 or 1.3 times, respectively. The enhancement of the oxidative stability was mainly due to both the hydrophobic interactions formed between AP and AAs, and the adsorption of AP on the surface of AAs crystals (except lysine), assisted by the suspension of the AAs in ethanol antisolvent, as confirmed with attenuated total reflection–Fourier transform infrared (ATR–FTIR) and X-ray diffraction (XRD) analyses.

Effects of extraction solvents on antarctic krill oil quality characteristics and some insights into the oxidation stability of antarctic krill oil

The effects of 6 solvent combinations (Folch, acetone/ethanol [1:1, v/v], ethanol [95%, v/v], n-hexane/ethyl acetate [7:3, v/v], n-hexane/ethanol [10:1, v/v], and isopropanol alcohol [95%, v/v] with different polarities on the quality characteristics of Antarctic krill oil (AKO) extracted from Antarctic krill were investigated in this study. The relationship between endogenous active substances and oxidative stability was also explored. There was a significant positive correlation between solvent polarity and AKO yield (r = 0.91, p < 0.05), a significant positive correlation with total tocopherols (r = 0.84, p < 0.05) and a weak correlation with astaxanthin (r = 0.53). In addition, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in AKO were mostly located in phosphatidylcholines, lysophosphatidylcholine, phosphatidylethanolamine and lysophosphatidylethanolamine. ethanol (95%, v/v) had the highest efficiency of glycerophospholipids (34.39%), EPA (20.83%) and DHA (9.61%). For liposolubility trace substances, astaxanthin were extracted most efficiently with Folch (283.49 μg/g) and acetone/ethanol (1:1, v/v, 264.58 μg/g), whereas tocopherols were extracted most efficiently with ethanol (95%, v/v, 114.29 μg/g). Astaxanthin, tocopherol and phosphatidylcholines were closely related to the oxidative stability of AKO. Astaxanthin in AKO showed a significant (p < 0.05) positive correlation with ABTS· scavenging capacity, whereas tocopherol and phosphatidylcholines showed a significant (p < 0.05) dose-effect relationship with total reducing power.

Supersonic Hot Jet Ablative Testing and Analysis of Boron Nitride Nanotube Hybrid Composites

Boron nitride nanotubes (BNNTs) are high-strength, high-modulus nanotubes with high thermal and oxidative stabilities. Two hybrid composites were prepared with satin weave CF and resole-type phenolic resin: one with surface layers of BNNTs and one with alternating interlayers of BNNTs. The samples were subjected to hot jet tests that simulate realistic high-pressure-temperature conditions to understand the behavior of BNNTs under high-pressure erosion. Adding BNNTs to CF/phenolic laminates enhanced the ablation resistance by reinforcing the char material and mitigated localized thermal damage. Hybrid laminates exhibited up to 14% lower weight loss, 55% increase in flexural modulus, higher thermal diffusivity, and improved char yield and microstructure compared to CF/phenolic samples. The surface layer hybrid had many surviving nanotubes reinforcing the char and crystalline oxide structures that could mitigate further oxygen diffusion. Various characterization methods were used to deduce possible mechanisms and their products, indicating that BNNTs could serve as growth templates for direct crystalline boron oxide formation. Overall, hybrid BNNT/CF/phenolic laminates displayed better ablation resistance and favorable microstructure evolution under high-pressure conditions.

Hierarchical porous SiCnws/SiC composites with one-dimensional oriented assemblies for high-temperature broadband wave absorption

The research on high-performance electromagnetic wave absorption materials with high-temperature and oxidative stability in extreme environments is gaining popularity. Herein, the lightweight silicon carbide nanowires (SiCnws)/SiC composites are fabricated with in-situ SiC interface on one-dimensional oriented SiCnws skeleton, which collaborative configuration by 3D printing and freeze casting assembly. The constructed porous structure optimizes the impedance matching degree and scattering intensity, the maximum effective absorption bandwidth (EABmax) of 5.9 GHz and the minimum reflection loss (RLmin) of -41.4 dB can be realized. Considering the inherent oxidation resistance of SiC, the composites present well-maintained absorption performance at 600 °C. Even at 1100 °C, the EABmax of 4.9 GHz and RLmin of -30.4 dB also demonstrate the high-temperature absorption stability of the composites, indicating exceptional wave absorption properties and thermal stability. The slight attenuation can be attributed to the decrease in impedance matching capability accompanying the elevated dielectric constant. This work clarifies the impact of structure and component synergy on wave absorption behavior, and offers a novel approach to producing high-performance and high-temperature resistance ceramic-based electromagnetic wave absorption materials suitable for extreme environments.