Overpressure Distribution Research Articles

BRIEF UNDERSTANDING OF CHARACTERISTICS DEPLETED RESERVOIR (INTERVAL-I) USING PORE PRESSURE AND FRACTURE GRADIENT ANALYSIS IN "X" FIELD, SANGA-SANGA AXIS, KUTAI BASIN

Field X, as this study area's focus, boasts over 200 wells proven to be hydrocarbon producers. Two pore pressure regimes exist: normal hydrostatic and overpressure. The primary hydrocarbon reservoir in the Balikpapan Formation within the Sanga- sanga axis at Field X consists of sandstone. Drilling disturbances, particularly in the lower intervals of this reservoir, often occur due to overpressure. The main challenge encountered in this reservoir is mud losses. The objective of this study is to develop the Pore Pressure and Fracture Gradient characteristics and its relation to the geological environment. Furthermore, the distribution of Sand (Interval-I) is determined, which is the primary cause of losses due to production. Besides that, the parameters used to create optimal fracture gradient is also defined. Thirteen wells in this field were examined to identify the controlling factors of pore pressure. This study integrates wireline logging, velocity, mud logs, pressure tests, drilling parameters and event which are subsequently processed for determining shale points, Normal Compaction Trend (NCT), calculating overburden gradient, and estimating pore pressure using the Eaton method. From the analysis result, the distribution of overpressure and the generating mechanism of overpressure are determined. This study also carried out analysis to determine overpressure and depleted Sandstone (Interval-I) distribution. Subsequently, facies and depositional environtment analysis are conducted, followed by modelling Sandstone (Interval-I) and determining Sandstone’s poisson ratio from loss data and shale’s from leak of test data for fracture gradient estimation. Overpressure is found in Interval-I with magnitude of 4000-4700 psi, which corresponds to delta plain to delta front depositional environment. Top of overpressure is observed shallower in the southern than northern due to geological structure conditions. The generating mechanism of overpressure is caused by loading and hydrocarbon generation. The experienced loss in overpressure zone, caused by reservoir production from the initial pressure of 4475 psi and has depleted to 373 psi. From the sandstone distribution model, the loss sandstones are a connected fluvial channel in southern ward. It is also observed several unconnected channel sandstones that did not experience loss. Poisson ratio parameter for sandstone is 0.35, which is calibrated from the loss event with minimum fracture gradient in Interval-I is approximately 4772 psi. It is expected that the understanding of pore pressure and Sandstone (Interval-I) distribution could be used to increase the success ratio for optimal drilling planning, including to choose effective casing design, mud weight, and appropriate total depth.

Numerical study on dynamic response of a novel ribbed thin-walled UHPC box-type utility tunnel under gas explosion

At present, RC utility tunnels are widely used in urban utility tunnels. As a typical confined space, the complex load effect generated by the internal gas explosion of the gas tank of utility tunnel may lead to local damage or overall destruction of the structure of RC utility tunnel. Therefore, it is an important topic to improve the anti-explosion capability of the utility tunnel and ensure the normal operation of the utility tunnel after gas explosion. UHPC structure is considered to have excellent anti-explosion performance, so a ribbed thin-walled UHPC utility tunnel structure was proposed, which improved the overall stiffness and anti-explosion performance of the UHPC utility tunnel through the ribbed section. In view of the shortcomings of fluid-solid coupling method in gas simulation, Computational Fluid Dynamics (CFD) was used to calculate the overpressure distribution after gas explosion in UHPC utility tunnel. The accuracy of UHPC constitutive model and prestress simulation method was verified by testing results from the gas explosion on unbonded prestressed UHPC slab. The gas explosion damage mechanism of ribbed thin-walled UHPC utility tunnel, UHPC-NC combined utility tunnel and RC utility tunnel were comparatively analyzed. And the pre-fabricated stiffener height, UHPC slab thickness and UHPC strength were investigated on the anti-explosion performance of ribbed thin-walled UHPC utility tunnel against gas explosion. It is found that the UHPC strength needs to be enhanced dramatically to improve the blast resistance. The anti-explosion capability of utility tunnel can be effectively increased by increasing the rib height or increasing the thickness of the UHPC utility tunnel structure, and the damage pattern of the utility tunnel can also be changed from flexure-shear failure to bending failure. The results of the study can provide a reference for the damage analysis and anti-explosion design of ribbed thin-walled UHPC utility tunnels.

Effects of nozzle diameter on marine fuel injection and deflagration performance

The marine fuel injection and deflagration performance with different nozzle diameters in large compartments are researched in this work. The results show that marine fuel could quickly form a stable fuel spray field. Increasing nozzle diameter dramatically enhances the fuel spray concentration and aggravates the fuel spray deflagration degree, resulting in rapid increases in flame propagation speed, deflagration overpressure, and deflagration temperature. A larger nozzle diameter causes the deflagration flame to propagate further forward. With the increase of deflagration time, the flame propagation speed shows a trend of first rising and then decreasing, with fluctuations. When the nozzle diameter is small, the overpressure declines toward the back. In the case of large nozzles (≥0.8 mm), the overpressure distribution in the compartment fluctuates greatly, with a tendency to increase first and then decrease. Furthermore, deflagration peak overpressure ascends linearly with the logarithm of fuel spray concentration. The peak deflagration overpressure is 1.875 MPa with 1.0 mm nozzle diameter. The deflagration temperature is highest at the center of the deflagration. The research results can guide the assessment and prevention of fire and deflagration accidents on ships.

Distribution, origin and evolution of overpressure in the Paleogene and Neogene in the Western Qaidam Basin, northwestern China

Distribution, origin and evolution of overpressure in the Paleogene and Neogene in the Western Qaidam Basin, northwestern China

Rapid and sparse reconstruction of high-speed steady-state and transient compressible flow fields using physics-informed graph neural networks

Explosion flow fields are characterized by shock waves with varying intensity and position (i.e., explosive loads), which are the primary causes of structural damage. Accurate and rapid prediction of explosive loads is crucial for structural blast-resistant design and daily security management. While existing empirical models and numerical simulation methods can capture the propagation characteristics of explosive shock waves, high-precision simulation requires a massive computational workload, which is insufficient to meet the fast computational demands of various explosive scenarios. To address this contradiction, this study constructed a sparse reconstruction model for two-dimensional explosion fields based on machine learning algorithms. The model utilizes sparse observational data to establish a mapping relationship to the distribution of the entire flow field. The model is built by a physics-informed graph neural network (PIGN). The graph neural network is employed to associate node features, while the physical network is utilized to control model convergence, aiming to enhance model performance. Using the constructed dataset, the PIGN model was tested. Performance and generalization capabilities of the model were assessed by comparing its results with numerical simulation. This evaluation analyzed the relative error distribution and error statistical results of the reconstructed flow field. The results indicate that the PIGN model can effectively reconstruct explosion fields, with an average error in the reconstructed flow field below 4%. Furthermore, when the number of probe points reaches 10, the average error of the flow field reconstructed by the model is close to 6%. This model not only provides a highly reliable distribution of explosion overpressure and pressure-time variations but also, with a well-trained model, accomplishes flow field reconstruction within 1 ms. It offers a novel approach for achieving rapid and reasonable prediction of explosion fields or two-dimensional compressible flow fields.

Predicating of Formation Pore Pressures in Tertiary Reservoirs Using Geophysical Wireline Log Data

Changes to certain geophysical characteristics, such as sonic transit time with depth, indicate the pressure system of over-pressured zones. In this study, well-log data is used to investigate the distribution of formation overpressures in the tertiary reservoirs of one Iraqi oil field. Three wells located within the tertiary carbonate reservoir of one Iraqi oil field are of interest in this study. To assess the reservoirs, a petrophysics log analysis was carried out. The reservoir's intervals are the area of interest. The sonic velocity data was used to create a normal compaction trend line, and the overpressure zones were identified by observing the reversals in the normal compaction trend line. The pore pressure, fracture pressure, and gradients were calculated using the Eaton method. The method relies on the correlation between the normal transit time found on the normal compaction trend and the observed transit time from the log reading. The sonic log determines the bulk density and matches the density derived from the density log. Abnormal pressures were identified primarily within the area of interest, especially with unit B in Well 1. In Well 2, the abnormal pressures were recognized in zones above the area of interest. Abnormal pressures in Well 3 were identified primarily within all areas of interest. The importance of this work is to help predict overpressure zones in the research area before drilling or workover.

The distribution law of shock wave pressure in typical trenches

Trenches, as important practical military facilities, have important theoretical and military value in evaluating the damage power of ammunition, operational application, and effective safety protection of personnel on the battlefield through the spatiotemporal evolution of explosive shock waves within them. At present, there is a lack of in-depth research on the distribution and impact of overpressure inside the trench. The paper constructed a typical finite element simulation model of a trench, numerically calculated the shock wave overpressure inside the trench and on the wall, analyzed the spatiotemporal distribution of shock wave pressure in various parts of the trench, conducted on-site explosion tests, and installed shock wave pressure sensor measurement points in the trench. The pressure time history curve was obtained, and verified and compared with the simulation calculation results. Research data shows that the peak overpressure of the shock wave in the trench increases sequentially from the front wall to the back wall. The peak overpressure of the shock wave at the front wall attenuates by 10 % to 20 % compared to the inside of the trench, and increases by 40 % to 60 % at the back wall; The peak overpressure in the trench exhibits a “V-shaped” distribution at different depths, decreasing first and then increasing as the depth increases. The maximum overpressure peak increases by 40 % to 50 % compared to the minimum; Based on simulation and measured data in the trench, as well as the distribution law of shock wave pressure, safety protection suggestions for on-site combat personnel in the trench are provided.

Bio-inspired pulsed power switch under shock wave

The spark gap switch is a crucial component in the primary energy drive system for large pulse power devices. The switch electrodes are composed of high-density artificial graphite, possessing excellent erosion resistance. However, insufficient mechanical strength in the graphite electrodes makes them especially susceptible to mechanical damage under the enormous impact force caused by the increasing arc current, which seriously affects the reliability and service life of the switch. The distribution of the shock wave overpressure on the graphite electrode surface is deduced and calculated, and the refraction and reflection process of the shock wave from the air to the graphite interface is analyzed based on the Huygens–Fresnel principle. Furthermore, the doubling of refracted shock wave intensity into the graphite electrode is a preliminary characterization. The propagation process of stress wave after the shock wave enters the electrode is investigated by establishing two conventional graphite electrode structure models, namely T-shape and reverse T-shape, which reveal that severe stress concentration occurs in both structures. Drawing inspiration from the physiological structure of the woodpecker’s head, renowned for its exceptional impact resistance, the macroscopic geometry of the graphite electrode and the assembly structure of the switch have been bionically designed. The simulation results demonstrate that, in comparison to the conventional electrode structure, the bionic electrode structure eliminates stress concentration at the bolt end and electrode corner, while significantly reducing maximum equivalent stress and the degree of the stress concentration on the bottom surface of the electrode. These features contribute to the enhancement of the current capacity and reliability of the spark gap switch.

Overpressure origin and evolution during burial in the shale gas plays of the Wufeng-Longmaxi formations of southern Sichuan basin

Identifying the origin, evolution and distribution of overpressure poses a significant challenge in shale gas reservoir, particularly in the deeper layers and zones of the Wufeng-Longmaxi Formations. To uncover the origin mechanism and reconstruct the evolution process of overpressure, samples are collected from the Wufeng-Longmaxi Formations in the southern Sichuan Basin. Subsequently, a combination of multi well-logging methods is employed to comprehensively identify the origin mechanism of overpressure. Additionally, forward numerical simulation and Laser Raman inversion validation are utilized to reconstruct the evolution process of overpressure during burial. Results show that: (1) Hydrocarbon generation pressurization is identified as the dominant origin mechanism of overpressure in the Wufeng-Longmaxi shale gas reservoir, employing a combination of well-logging methods, the revised Bowers method, and a velocity-density intersection chart. (2) The Wufeng-Longmaxi shale undergoes three main pressurization processes, including kerogen generation oil pressurization, crude oil cracking gas pressurization and kerogen cracking gas pressurization. Hydrocarbon generation pressurization correlates closely with factors such as organic matter abundance and type, original hydrogen index, kerogen mass fraction and transformation rate, oil cracking rate and retention coefficient. (3) The pressure coefficient of kerogen generation oil pressurization and gas cracking pressurization reaches 1.73 and 2.78, respectively. The contribution of crude oil cracking gas pressurization (75.6 MPa) is significantly greater than kerogen generation oil pressurization (37.8 MPa). (4) The density of methane inclusions (0.290–0.319 g/cm3) is corroborated through both Laser Raman spectroscopy and homogenization temperature analysis. The paleo pressure is recovered as 90.3–193.5 MPa, with a corresponding pressure coefficient spanning from 1.39 to 2.98. This study not only contributes to the advancement of the shale gas accumulation theory, but also provides valuable insights to guide the further exploration and development of marine shale gas within the intricate tectonic setting of the Sichuan Basin.

Numerical calculation of shock wave overpressure produced by multiple cloud detonation

PurposeA model for calculating the global overpressure time history of a single cloud detonation from overpressure time history of discrete positions in the range of single cloud detonation is to be proposed and verified. The overpressure distribution produced by multiple cloud detonation and the influence of cloud spacing and fuel mass of every cloud on the overpressure distribution are to be studied.Design/methodology/approachA calculation method is used to obtain the global overpressure field distribution after single cloud detonation from the overpressure time history of discrete distance to detonation center after single cloud detonation. On this basis, the overpressure distribution produced by multi-cloud under different cloud spacing and different fuel mass conditions is obtained.FindingsThe results show that for 150 kg fuel, when the spacing of three clouds is 40 m, 50 m, respectively, the overpressure range of larger than 0.1 MPa is 5496.48 mˆ2 and 6235.2 mˆ2, which is 2.89 times and 3.28 times of that of single cloud detonation. The superposition effect can be ignored when the spacing between the three clouds is greater than 60 m. In the case of fixed cloud spacing, once the overpressure forms continuous effective superposition, the marginal utility of fuel decreases.Originality/valueA model for calculating the global overpressure time history of a single cloud detonation from overpressure time history of discrete positions in the range of single cloud detonation is proposed and verified. Based on this method, the global overpressure field of single cloud detonation is reconstructed, and the superimposed overpressure distribution characteristics of three cloud detonation are calculated and analyzed.

Experimental and numerical simulation study on the dispersion and explosion process of solid-liquid-air mixed three phase components

The diffusion of solid-liquid fuel and the explosion of three-phase mixed cloud were studied experimentally in an unconstrained external field. The formation and explosion process of solid-liquid fuel clouds was implemented using numerical simulation methods, and param such as cloud diameter, cavity diameter, cloud concentration, fireball temperature, and overpressure distribution were obtained. The results show that the cloud cluster expands rapidly in the early stage of fuel dispersal, and gradually enters the turbulent diffusion stage after 20 ms. At 40 ms, the diameter of the cloud cluster is about 4.97 m, the volume of the cloud cluster is 18.31 m3, and the fuel concentration is mainly in the range of 30 g m−3–80 g m−3. The error between the scattering and explosion processes of numerical simulation and experimental results is less than 10 %, proving the reliability of the simulation model. This study can guide the prevention of industrial disasters.

Effect of obstacle position and equivalence ratio on syngas explosion characteristics

An experimental study of premixed syngas/air flame explosive characteristics in an obstacle pipe is introduced. Square obstacles with a blocking rate of 0.5 are installed at varying positions from the ignition end inside a closed pipe to conduct syngas-air explosion dynamics experiment with varying equivalence ratios (Φ) and obstacle positions (OP). Results show that compared to OP = 150 mm, the tulip flame will form at OP = 450 mm and OP = 750 mm. The distribution of flame front velocity and overpressure have same trend in the process of flame oscillation. Nevertheless, the overpressure curve will produce oscillation when the flame propagates out of the pipe at OP = 450 mm. As the increase of OP, the maximum flame front velocity first increases and then decreases and the maximum overpressure decreases gradually. Both the maximum flame front velocity and maximum overpressure first increase then decrease with Φ, reaching the maximum at Φ = 1.4. This research can provide some suggestions when syngas-air fuels are applied in the presence of obstacles.

Enhancing flammable gas dispersion and explosion prediction: A novel hybrid analytical-numerical approach with exploCFD

The analysis of explosion consequences involves two primary approaches: analytical methods and Computational Fluid Dynamics (CFD). Analytical methods offer a simplified one-dimensional model of overpressure, while CFD provides a more detailed numerical analysis capturing asymmetric and inhomogeneous overpressure distribution. However, CFD simulations can be computationally demanding and require additional sub-grid models to enable calculations to be carried out in realistic timeframes. Both approaches have large irreducible uncertainty. The hybrid analytical-numerical approach aims to simplify and speed up the calculation process, yet producing results that remain within this irreducible uncertainty. This study describes the theoretical basis and demonstrates the successful implementation of the hybrid methodology in exploCFD for predicting flammable gas dispersion and explosions with special focus on hydrogen. The methodology combines analytical source terms with numerical simulations, capturing the inhomogeneity of explosion overpressure distribution in realistic explosion cases, and gas release dispersion cases, which can only be achieved by taking obstacles and obstructions into account. We then compare the predictions of exploCFD with dispersion and explosion experiments with experimental results, with a special focus on Hydrogen. The focus on hydrogen utilization in recent years necessitates the development of predictive capabilities to assess the consequences of hydrogen-fuelled accidents in industrial facilities due to its unique properties. The methodology exhibits good agreement with experiment, for maximum and transient overpressure readings as well as dispersion concentrations. The study demonstrates that exploCFD's hybrid methodology is well-suited for modeling flammable gas releases, particularly hydrogen, and simulating explosion events resulting from the ignition of premixed gas clouds. This approach offers a superior alternative to more time-consuming and costly purely numerical methods, as well as crude analytical methods still in use today.

Re-evaluation of the genetic mechanism of overpressure: Western slope zone of the Xihu Depression, East China Sea Shelf Basin

The accurate prediction of pore pressure relies on a comprehensive understanding of the genetic mechanism of overpressure and its impact on rock's physical properties. The western slope zone of the Xihu Depression in the East China Sea Shelf Basin serves as a valuable natural experimental site for re-evaluating the mechanism of overpressure formation due to significant differences in scholars' understanding of this phenomenon. This study uses a combination of multilogging analysis, the Bowers method, and density-velocity crossplotting to demonstrate that overpressure in the area is not attributed to disequilibrium compaction, combined with the geological background of overpressure generation. By considering the types of clay minerals, their diagenetic transformation, temperature, and current overpressure distribution, the main genetic mechanisms of overpressure are determined to be chemical compaction and fluid expansion. Fluid expansion is primarily associated with hydrocarbon generation, as evidenced by the correspondence between the overpressure top interface and chloroform asphalt “A,” hydrocarbon generation potential and TOC (total organic carbon) distribution. Furthermore, the initial scale generation of hydrocarbons is consistent with the current overpressure top interface. A mathematical model is developed to quantify the proportion of overpressure by considering the identified genetic mechanism and the vertical variation characteristics of mudrock porosity resulting from original components, mechanical compaction, and chemical compaction. The proposed “one point-two lines” model characterizes the contributions of fluid expansion and chemical compaction to overpressure formation during the intensive chemical compaction stage. The overpressure generated by hydrocarbon generation through fluid expansion likely induces formation fractures, leading to the episodic expulsion of oil and gas into reservoirs. This charging pattern of overpressure exhibits fast speed and low migration loss, which holds significant implications for forming large and medium-sized oil and gas fields with high enrichment.

Numerical analysis of the effect of ventilation door on the propagation characteristics of gas explosion shock waves

Ventilation door are commonly found in tunnels and other underground engineering ventilation structures, disaster periods using its explosion isolation, explosion relief, wind regulation characteristics for disaster prevention and mitigation is of great significance. This paper numerically simulates the propagation characteristics of the gas explosion shock wave in the nearby tunnel when the ventilation door are opened at different degrees, and analyzes the influence mechanism of the opening degree on the change law of the shock wave overpressure distribution in the nearby tunnel. The results show that the shock wave forms a strong turbulence area (high pressure area) on both sides in front of the ventilation door, and the area range and the overpressure value decrease with the increase of the opening degree; the ventilation door reduce the intensity of the shock wave, so that the overpressure behind the ventilation door decreases, and the smaller the opening degree, the lower the overpressure behind the ventilation door. The secondary explosion formed shock wave and the ventilation door reflected shock wave meet to form a stronger shock wave, which leads to different opening degrees of ventilation door, its before, after the roadway and after the bifurcation of the main roadway in the measured points of the overpressure change curve is different, the main difference is that the peak overpressure for the first wave or the second wave peak. The peak overpressure in the tunnel before and after the ventilation door decreases and increases respectively with the increase of the opening length, and the overall decay of the peak overpressure at 5 m and 10 m before the ventilation door is 49.56% and 4.04% respectively and only has an effect on the peak overpressure in main tunnel within 20 m from the bifurcation.

Generation and distribution of overpressure in ultra-deep carbonate reservoirs controlled by intra-cratonic strike-slip faults: The Ordovician of Shuntuoguole area in the Tarim Basin

The strike-slip fault-controlled ultra-deep fractured-vuggy carbonate reservoir is an increasingly important exploration target. However, the high heterogeneity of fault-controlled reservoirs and the ineffective methods available for pressure prediction make it difficult to assess the risk of potential overpressure in ultra-deep carbonate reservoirs. Abnormal overpressure is common in the ultra-deep strike-slip fault-controlled carbonate reservoirs in the Shunbei Oilfield of the Tarim Basin. According to measured pressures, petroleum accumulation history, and fault framework, this study investigates the generation mechanisms of overpressure in fault-controlled carbonates and reconstructs the pressure evolution of reservoirs. Finally, the effect of strike-slip faults on current overpressure distribution is discussed. Measured pore pressure data from 90 wells showed that all reservoirs present in the major fault zones are normally pressured, and the reservoirs present far away from the major faults commonly develop overpressures. The distribution patterns of overpressure in the Middle-Lower Ordovician reservoirs coincide with areas with fault reactivation during the Himalayan Period. The results of the comprehensive analysis of petroleum accumulation history, fault activity, and well production suggested that dry gas generation is a primary cause of overpressure in the Middle-Lower Ordovician reservoirs. The relatively low temperature in the reservoir, in addition to the highly compartmentalized nature of overpressure, indicated that these overpressured gas migrate vertically into the Ordovician formation from deep strata along strike-slip faults. The pressure evolution restored by basin modelling and fluid inclusion showed that distinct differences in overpressure magnitude in the different reservoirs were formed at the stage of gas charging but not at the early stages of oil accumulation. The difference in physical properties of the two types of fault-controlled reservoirs resulted in different pressure distributions and oil-bearing levels in the ultra-deep carbonate reservoirs at present. The strike-slip fault zones are the primary pathways by which overpressured fluids migrate from the deeper Cambrian formation into the Ordovician reservoirs and act as barriers to separate the pressure systems in the ultra-deep carbonate reservoirs. These findings are expected to help mitigate the drilling risks with overpressure in deep strike-slip fault-controlled carbonate reservoirs.

On the Possibility of Detecting Pore Pressure Changes in Marine Sediments Using Bottom Seismometer Data

This paper is devoted to the detection and analysis of overpressure zones in unconsolidated seafloor sediments using an ocean-bottom seismometer. The methodological aspects of creating a system of anomalous pore pressure zone detection in marine sediments are studied. The aim of this study is to establish the requirements for a pore pressure monitoring system necessary to successfully detect overpressure zones based on seismic response, and to analyze temporal changes in pore pressure distribution. Data from a certain offshore field are used as a basis from which to construct synthetic models of overpressure distribution in marine sediments. Synthetic models are constructed using specially developed rock physics models for unconsolidated saturated media. Seismic responses are calculated for these synthetic models to represent data that otherwise would be obtained from bottom seismometers placed on the seafloor. Resultant seismic responses are studied with respect to the detection of overpressure zones. Possibilities and limitations of bottom seismometer data are discussed. Requirements for the frequency bands of bottom seismometers are formulated based on the results that are obtained.

Application of Multipole Decomposition for Sonic Boom Propagation Problems

In the present work a modification of the multipole decomposition method is developed, which makes it possible to relate the overpressure distribution in the near-field of a supersonic transport (SST) with a far-field distribution, which is needed for the solution of sonic boom propagation problem from SST. A generalization of the method for solving the integral equations arising from multipole decomposition is performed. An algorithm for multipole correction of near-field overpressure signatures obtained in numerical simulations has been developed and tested.

Selection of Material and Thickness of the Protective Wall in the Conditions of a Hydrogen Explosion of Various Power

The main purpose of this study is a numerical assessment of the consequences of an explosion of a hydrogen-air cloud on the personnel of a hydrogen fueling station and the strength of a protective solid wall of certain dimensions. An explosive gas mixture is formed as a result of the destruction of high-pressure cylinders, the number of which determines the size of the cloud, the power of the explosion, and the scale of the consequences of environmental impact. To obtain the spatio-temporal distribution of the maximum overpressure and the impulse of the shock wave compression phase, a mathematical model of the dispersion of an active gaseous admixture is used, taking into account the chemical interaction with air oxygen. The probable consequences of the shock-impulse impact on the personnel at the control point are carried out using probit analysis. The values of the maximum bending moment and stress at the base of the protective wall, which result from the impact of the blast wave, are used to deterministically estimate the minimum wall thickness necessary for the safe operation of the protective device. The mathematical model takes into account the complex terrain and the three-dimensional non-stationary nature of the shock wave propagation process, and it is a source of data necessary to solve the problem of the strength of solid objects located in the area of baric perturbation of the gaseous medium. The developed methodology makes it possible to carry out a comparative analysis of the effectiveness of protective structures in relation to the power of the explosion.

An explosion field inversion algorithm combining finite element calculation and tomography

The finite element numerical calculation can get the shock wave velocity and overpressure at any point in the explosion field, but some factors such as the parameter value of the state equation influence the calculation results. The tomography inversion can acquire the velocity and overpressure distribution of shock wave; however, the initial model and constraints can affect the inversion results. Aiming at the shortcoming of the two algorithms, this article combines the two methods and presents a new algorithm to reconstruct the explosion field. First, The LS-DYNA finite element program is applied to establish a numerical model and calculate the shock wave velocity and superpressure in air explosion. Second, generalized inversion with regularization tomography inversion algorithm is used to invert the shock wave field. In the inversion, the finite element calculation results are used as the initial model of inversion and constrain the inversion. The experiment results prove that the proposed algorithm can greatly improve the inversion accuracy and the iterative convergence speed. The inversion image can better depict the internal details of the explosion field and eliminate noise.