Osteogenic Differentiation Medium Research Articles

LINC01133 promotes the osteogenic differentiation of bone marrow mesenchymal stem cells by upregulating CTNNB1 by acting as a sponge for miR-214-3p

BackgroundOsteoporosis results from decreased bone mass and disturbed bone structure. Human bone marrow mesenchymal stem cells (hBMSCs) demonstrate robust osteogenic differentiation, a critical process for bone formation. This research was designed to examine the functions of LINC01133 in osteogenic differentiation.MethodsDifferentially expressed lncRNAs affecting osteogenic differentiation in hBMSCs were identified from the GEO database. A total of 74 osteoporosis patients and 70 controls were enrolled. hBMSCs were stimulated to undergo osteogenic differentiation using an osteogenic differentiation medium (OM). RT-qPCR was performed to evaluate LINC01133 levels and osteogenesis-related genes such as osteocalcin, osteopontin, and RUNX2. An alkaline phosphates (ALP) activity assay was conducted to assess osteogenic differentiation. Cell apoptosis was detected using flow cytometry. Dual luciferase reporter assay and RIP assay were employed to investigate the association between miR-214-3p and LINC01133 or CTNNB1. Loss or gain of function assays were conducted to elucidate the impact of LINC01133 and miR-214-3p on osteogenic differentiation of hBMSCs.ResultsLINC01133 and CTNNB1 expression decreased in osteoporotic patients but increased in OM-cultured hBMSCs, whereas miR-214-3p showed an opposite trend. Depletion of LINC01133 suppressed the expression of genes associated with bone formation and ALP activity triggered by OM in hBMSCs, leading to increased cell apoptosis. Nevertheless, this suppression was partially counteracted by the reduced miR-214-3p levels. Mechanistically, LINC01133 and CTNNB1 were identified as direct targets of miR-214-3p.ConclusionsOur study highlights the role of LINC01133 in positively regulating CTNNB1 expression by inhibiting miR-214-3p, thereby promoting osteogenic differentiation of BMSCs. These findings may provide valuable insights into bone regeneration in osteoporosis.

Relaxin-2 promotes osteoblastic differentiation mediated by epidermal growth factor and epidermal growth factor receptor signaling.

Loss of osteogenic differentiation potential of osteoblasts has been associated with the pathogenesis of osteoporosis. Thus, stimulation of osteoblastic differentiation is a therapeutic strategy for osteoporosis. Relaxin-2 is a peptide hormone with potent biological functions. However, the effects of Relaxin-2 in osteoblastic differentiation and osteoporosis have not been reported before. Here, we report a novel physiological role of Relaxin-2 in promoting osteoblastic differentiation and mineralization of MC3T3-E1 cells. Our results indicate that exposure to Relaxin-2 upregulated the expression, and elevated the activity of alkaline phosphatase (ALP) when MC3T3-E1 cells were cultured in osteogenic differentiation medium (OM). Additionally, Relaxin-2 upregulated the mRNA levels of osteocalcin (ocn), osteopontin (opn), and collagen type I alpha 1 (Col1a1). The alizarin red S staining assay revealed that Relaxin-2 promoted the mineralization of MC3T3-E1 cells. We also found that Relaxin-2 increased the expression of Runx-2 as well as the epidermal growth factor (EGF) and epidermal growth factor receptor (EGFR). Importantly, silencing of EGF abolished the effects of Relaxin-2 in osteoblastic differentiation and related gene expression. These findings suggest that Relaxin-2 stimulates osteogenic differentiation through activating EGF/EGFR signaling.

Sclerostin inhibits Protein kinase C inhibitor GÖ6976 induced osteogenic differentiation of dental follicle cells

Human dental follicle cells (DFCs) as multipotent stem cells are currently investigated within the field of regenerative medicine considering their potential for the regeneration of dental tissues, bone defects caused by periodontal or degenerative diseases and the treatment of craniofacial disorders. However, molecular mechanisms of the differentiation into mineralizing cells are still inadequately understood. Previous studies have shown that GÖ6976, an inhibitor of classical isoforms of protein kinase C (PKC), enhanced ostogenic differentiation of DFCs. A possible mechanism for increased osteogenic differentiation could be the regulation of ossification inhibitors. This study therefore investigated whether the osteogenic differentiation inhibitor sclerostin (SOST) is regulated by GÖ6976 and whether the addition of sclerostin attenuates the stimulating effect of the PKC inhibitor. We demonstrated that the expression of the sclerostin gene decreased after PKC inhibition by GÖ6976 and that its gene expression is likely maintained by PKC via the BMP signaling pathway. Furthermore, supplementation of osteogenic differentiation medium with sclerostin impairs GÖ6976-induced differentiation of DFCs. Our data suggest that regulation of sclerostin mediates PKC inhibition-induced mineralization of DFCs.

Tanshinone IIA promotes osteogenic differentiation potential and suppresses adipogenic differentiation potential of bone marrow mesenchymal stem cells.

Tanshinone IIA (Tan IIA) may have therapeutic effects on avascular necrosis of the femoral head (ANFH) by targeting bone marrow mesenchymal stem cells (BMSCs). The effect and underlying mechanism of Tan IIA on adipogenesis and osteogenesis ability of BMSCs remain to be elucidated. In the present study BMSCs were treated with osteogenic or adipogenic differentiation medium with or without Tan IIA under hypoxic environment. Osteogenic differentiation potential was evaluated by alkaline phosphatase (ALP) measurement, alizarin red staining and reverse transcription‑quantitative (RT‑q) PCR of osteogenic marker genes. Adipogenic differentiation potential was evaluated with oil red staining and RT‑qPCR of adipogenic marker genes. Detailed mechanism was explored by RNA‑seq and small molecular treatment during osteogenesis and adipogenesis of BMSCs. ALP level, mineralized nodules and expression level of osteogenic marker genes significantly increased following Tan IIA treatment during osteogenic differentiation of BMSCs. Lipid droplet and expression levels of adipogenic marker genes significantly decreased following Tan IIA treatment during adipogenic differentiation of BMSCs. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes analyses of RNA‑seq data indicated increased Akt and TGFβ signaling following Tan IIA treatment. Further western blot assay confirmed that Tan IIA significantly activated Akt/cAMP response element‑binding protein signaling and TGFβ/Smad3 signaling. Application of Akti1/2 (an Akt inhibitor) significantly decreased the promotion effect of osteogenesis induced by Tan IIA, while the addition of SB431542 significantly reduced inhibition effect of adipogenesis caused by Tan IIA. Tan IIA could promote osteogenic differentiation potential of BMSCs by activating AKT signaling and suppress adipogenic differentiation potential of BMSCs by activating TGFβ signaling.

Integrating Mechanics and Bioactivity: A Detailed Assessment of Elasticity and Viscoelasticity at Different Scales in 2D Biofunctionalized PEGDA Hydrogels for Targeted Bone Regeneration.

Methods for promoting and controlling the differentiation of human mesenchymal stem cells (hMSCs) in vitro before in vivo transplantation are crucial for the advancement of tissue engineering and regenerative medicine. In this study, we developed poly(ethylene glycol) diacrylate (PEGDA) hydrogels with tunable mechanical properties, including elasticity and viscoelasticity, coupled with bioactivity achieved through the immobilization of a mixture of RGD and a mimetic peptide of the BMP-2 protein. Despite the key relevance of hydrogel mechanical properties for cell culture, a standard for its characterization has not been proposed, and comparisons between studies are challenging due to the different techniques employed. Here, a comprehensive approach was employed to characterize the elasticity and viscoelasticity of these hydrogels, integrating compression testing, rheology, and atomic force microscopy (AFM) microindentation. Distinct mechanical behaviors were observed across different PEGDA compositions, and some consistent trends across multiple techniques were identified. Using a photoactivated cross-linker, we controlled the functionalization density independently of the mechanical properties. X-ray photoelectrin spectroscopy and fluorescence microscopy were employed to evaluate the functionalization density of the materials before the culturing of hMSCs on them. The cells cultured on all functionalized hydrogels expressed an early osteoblast marker (Runx2) after 2 weeks, even in the absence of a differentiation-inducing medium compared to our controls. Additionally, after only 1 week of culture with osteogenic differentiation medium, cells showed accelerated differentiation, with clear morphological differences observed among cells in the different conditions. Notably, cells on stiff but stress-relaxing hydrogels exhibited an overexpression of the osteocyte marker E11. This suggests that the combination of the functionalization procedure with the mechanical properties of the hydrogel provides a potent approach to promoting the osteogenic differentiation of hMSCs.

Oncostatin M promotes osteogenic differentiation of tendon-derived stem cells through the JAK2/STAT3 signalling pathway

PurposeOncostatin M (OSM) is involved in the regulation of osteogenic differentiation and has a major role in the development of heterotopic ossification. The role of OSM in osteogenic differentiation of tendon-derived stem cells (TDSCs) and its mechanism have not been reported. This study aim to investigate the role of OSM in osteogenic differentiation of TDSCs and study the mechanism.MethodsTDSCs were differentiated in osteogenic differentiation medium for 7 days. Recombinant OSM was added to the osteogenic differentiation medium for 7 and 14 days. The effect of Janus kinase 2 (JAK2) inhibitor AZD1480 and signal transducer and activator of transcription 3 (STAT3) inhibitor stattic in the presence of recombinant OSM on osteogenic differentiation of TDSCs was examined after differentiation for 7 and 14 days. Alkaline phosphatase and alizarin red staining were used to assess the effects on early and mid-stage osteogenic differentiation, respectively. Western blotting and qPCR were used to assess the expression of receptor and signalling pathway-related proteins and osteogenic marker genes, respectively.ResultsTDSCs were successfully induced to differentiate into osteoblasts. Recombinant OSM promoted osteogenic differentiation of TDSCs to early and mid-stages. After addition of AZD1480 or stattic, decreased alkaline phosphatase and alizarin red staining were observed in the early and mid-stages of osteogenic differentiation. Additionally, decreased expression of receptor and pathway-related proteins, and osteogenic genes was found by western blotting and qPCR, respectively.ConclusionOSM promotes osteogenic differentiation of TDSCs and the JAK2/STAT3 signalling pathway plays an important role.

Nerve growth factor promote osteogenic differentiation of dental pulp stem cells through MEK/ERK signalling pathways.

Nerve growth factor (NGF) and its receptor, tropomyosin receptor kinase A (TrkA), are known to play important roles in the immune and nervous system. However, the effects of NGF on the osteogenic differentiation of dental pulp stem cells (DPSCs) remain unclear. This study aimed to investigate the role of NGF on the osteogenic differentiation of DPSCs in vitro and the underlying mechanisms. DPSCs were cultured in osteogenic differentiation medium containing NGF (50 ng/mL) for 7 days. Then osteogenic-related genes and protein markers were analysed using qRT-PCR and Western blot, respectively. Furthermore, addition of NGF inhibitor and small interfering RNA (siRNA) transfection experiments were used to elucidate the molecular signalling pathway responsible for the process. NGF increased osteogenic differentiation of DPSCs significantly compared with DPSCs cultured in an osteogenic-inducing medium. The NGF inhibitor Ro 08-2750 (10 μM) and siRNA-mediated gene silencing of NGF receptor, TrkA and ERK signalling pathways inhibitor U0126 (10 μM) suppressed osteogenic-related genes and protein markers on DPSCs. Furthermore, our data revealed that NGF-upregulated osteogenic differentiation of DPSCs may be associated with the activation of MEK/ERK signalling pathways via TrkA. Collectively, NGF was capable of promoting osteogenic differentiation of DPSCs through MEK/ERK signalling pathways, which may enhance the DPSCs-mediated bone tissue regeneration.

Human umbilical cord mesenchymal stem cells overexpressing RUNX1 promote tendon-bone healing by inhibiting osteolysis, enhancing osteogenesis and promoting angiogenesis.

Rotator cuff injury (RCI) is a common shoulder injury, which is difficult to be completely repaired by surgery. Hence, new strategies are needed to promote the healing of tendon-bone. We aimed to investigate the effect of human umbilical cord mesenchymal stem cells (hUC-MSCs) overexpressing RUNX1 on the tendon-bone healing after RCI, and to further explore its mechanism. Lentiviral vector was used to mediate the overexpression of RUNX1. RUNX1-overexpressed UCB-MSCs (referred to as MSC-RUNX1) were co-cultured with osteoclasts, and TRAP staining was performed to observe the formation of osteoclasts. Then MSC-RUNX1 was cultured in osteogenic differentiation medium, Alizarin red staining was conducted to detect osteogenic differentiation. The expression of markers of osteogenesis and osteoclast was detected by RT-qPCR. EA. hy926 cells were co-cultured with MSC-RUNX1. Transwell assay was used to detect the migration, and the expression of angiogenesis related-genes VEGF and TGF-β was detected by RT-qPCR. The rat rotator cuff reconstruction model was established and MSCs were injected at the tendon-bone junction. Biomechanical test and micro-CT scanning were performed, and HE, Masson and Alcian Blue staining were used for histological evaluation of tendon-bone healing. TUNEL and PCNA immunofluorescence (IF) staining were performed to evaluate apoptosis and proliferation at the tendon-bone healing site. The levels of TNF-α, IL-6 and IL-8 in serum were detected by ELISA. The expression of CD31 and Endomucin that related to angiogenesis was detected by IF. Safranin O-fast and TRAP/CD40L immunohistochemical staining were used to assess the levels of osteoclasts and osteoblasts at the tendon-bone healing site. hUC-MSCs overexpressing RUNX1 inhibited osteoclast formation and promoted osteogenic differentiation. MSC-RUNX1 could promote the migration and tube formation of EA. hy926 cells, and up-regulate the levels of VEGF and TGF-β. Model mice treated with MSC-RUNX1 partially restored the biomechanical indexes. Treatment of MSC-RUNX1 obviously increased the bone density, accompanied by the formation of new bone. In vivo experiments showed that MSC-RUNX1 treatment could promote tendon-bone healing and inhibit inflammatory response in rats. MSC-RUNX1 treatment also promoted angiogenesis at the tendon-bone healing site, while inhibiting osteoclast formation and promoting osteogenic differentiation. hUC-MSCs overexpressing RUNX1 can inhibit the formation of osteoclasts and differentiation of osteoblasts, promote angiogenesis and inhibit inflammation, thereby promoting tendon-bone healing after RCI.

Comparison of the differentiation of ovine fetal bone-marrow mesenchymal stem cells towards osteocytes on chitosan/alginate/CuO-NPs and chitosan/alginate/FeO-NPs scaffolds

In the current study, the creation of a chitosan/alginate scaffold hydrogel with and without FeO-NPs or CuO-NPs was studied. From fetal ovine bone marrow mesenchymal stem cells (BM-MSCs) were isolated and cultivated. Their differentiation into osteocyte and adipose cells was investigated. Also, on the scaffolds, cytotoxicity and apoptosis were studied. To investigate the differentiation, treatment groups include: (1) BM-MSCs were plated in DMEM culture medium with high glucose containing 10% FBS and antibiotics (negative control); (2) BM-MSCs were plated in osteogenic differentiation medium (positive control); (3) positive control group + FeO-NPs, (4) positive control group + CuO-NPs; (5) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate scaffold; (6) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/FeO-NPs scaffold; and (7) BM-MSCs were plated in osteogenic differentiation medium on chitosan/alginate/CuO-NPs scaffold. Alkaline phosphatase enzyme concentrations, mineralization rate using a calcium kit, and mineralization measurement by alizarin staining quantification were evaluated after 21 days of culture. In addition, qRT-PCR was used to assess the expression of the ALP, ColA, and Runx2 genes. When compared to other treatment groups, the addition of CuO-NPs in the chitosan/alginate hydrogel significantly increased the expression of the ColA and Runx2 genes (p < 0.05). However, there was no significant difference between the chitosan/alginate hydrogel groups containing FeO-NPs and CuO-NPs in the expression of the ALP gene. It appears that the addition of nanoparticles, in particular CuO-NPs, has made the chitosan/alginate scaffold more effective in supporting osteocyte differentiation.

Comparison of properties of HAp and CaTiO3-HAp ceramic composite fabricated by different sintering conditions

A hydroxyapatite (HAp) ceramic and a 20% wt CaTiO3-HAp ceramic composite for potential application as biomaterials were produced using single-step sintering (SS) and two-step sintering (TSS) in air. The sample pellets were SS sintered at 1250 ?C with a holding time of 1 h. For TSS, the pellets were heated at 10?C/min to 1250?C (T1) and held at this temperature for 20 min (t1). The temperature was then rapidly lowered at 20?C/min to 1150?C (T2), and held at this temperature for 10 min (t2). The 20% wt CaTiO3-HAp ceramic composite obtained from TSS had a fine grain of 0.56 ? 0.04 mm due to the restraint of grain growth caused by the fast cooling from T1 to T2 and the hard CaTiO3 particles dispersed in the HAp matrix. The microstructure refinement of the 20% wt CaTiO3-HAp ceramic composite fabricated by TSS produced suitable sintered density due to increased locking at triple junctions. This ceramic composite exhibited fracture toughness of 2.10 MPa.m1/2 with a brittleness of 1.97 mm-1/2, indicating that crack propagation was suppressed. MG-63 osteoblast cells were able to adhere to the surface of both HAp and the 20% wt CaTiO3-HAp ceramic composite produced by TSS and were no different between 3 and 7 days of culture. The alkaline phosphatase activity of MG-63 cells was higher on both ceramics cultured in osteogenic differentiation medium than in complete growth medium, which indicated more efficient osteoinductivity.

LncRNA USP2-AS1 facilitates the osteogenic differentiation of bone marrow mesenchymal stem cells by targeting KDM3A/ETS1/USP2 to activate the Wnt/β-catenin signaling pathway

ABSTRACT Human bone marrow mesenchymal stem cells (HBMSCs) can promote new bone formation. Previous studies have proven the ability of long non-coding RNAs (lncRNAs) to modulate the osteogenic differentiation of mesenchymal stem cells. However, the molecular mechanism modulated by lncRNAs in affecting the osteogenic differentiation of HBMSCs remains largely unknown. Thus, this study aims to reveal the role of lncRNA ubiquitin-specific peptidase 2 antisense RNA 1 (USP2-AS1) in regulating the osteogenic differentiation of HBMSCs and investigate its regulatory mechanism. Through bioinformatics analysis and RT-qPCR, we confirmed that USP2-AS1 expression was increased in HBMSCs after culturing in osteogenic differentiation medium (OM-HBMSCs). Moreover, we uncovered that knockdown of USP2-AS1 inhibited the osteogenic differentiation of HBMSCs. Further exploration indicated that USP2-AS1 positively regulated the expression of its nearby gene USP2. Mechanistically, USP2-AS1 recruited lysine demethylase 3A (KDM3A) to stabilize ETS proto-oncogene 1 (ETS1), transcription factor that transcriptionally activated USP2. Additionally, USP2-induced Wnt/β-catenin signalling pathway activation via deubiquitination of β-catenin protein. In summary, our study proved that lncRNA USP2-AS1 facilitates the osteogenic differentiation of HBMSCs by targeting KDM3A/ETS1/USP2 axis to activate the Wnt/β-catenin signalling pathway.

Effects of cerium-doped bioactive glass incorporation on an alginate/gelatin scaffold for bone tissue engineering: In vitro characterizations

Bioactive glasses (BGs) have been extensively employed in treating bone defects due to their capacity to bond and integrate with hard and soft tissues. To promote their characteristics, BGs are doped with therapeutic inorganic ions; Among these, Cerium (Ce) is of special attention because of its material and biological properties. This study aimed to investigate the effects of the addition of Ce to BG on the physicochemical and biological properties of the alginate/gelatin (Alg-Gel) scaffold compared with a similar scaffold that only contains BG45S5. The scaffolds were characterized for their biocompatibility using human bone marrow-derived mesenchymal stem cells (hBM-MSCs) by MTT analysis. The osteogenic differentiation of hBM-MSCs cultured on the scaffolds was assessed by evaluating the alkaline phosphatase (ALP) activity and the expression of osteogenic-related genes. Scanning electron microscopy of the prepared scaffolds showed an interconnected porous structure with an average diameter of 212–272 μm. The Young's modulus of the scaffolds significantly increased from 13 ± 0.82 MPa for Alg-Gel to 91 ± 1.76 MPa for Alg-Gel-BG/Ce. Ce doping improved the osteogenic differentiation of hBM-MSCs and ALP secretion compared to the other samples, even without adding an osteogenic differentiation medium. The obtained results demonstrated the biocompatibility and osteo-inductive potentials of the Alg-Gel-BG/Ce scaffold for bone tissue engineering.

Icariin promotes osteogenic differentiation through the mmu_circ_0000349/mmu-miR-138-5p/Jumonji domain-containing protein-3 axis

Circular RNAs (circRNAs) regulate Jumonji domain-containing protein-3 (JMJD3) by sponging with microRNAs (miRNAs). This study aimed to investigate the role of icariin on specific circRNA/miRNA/JMJD3 axis in osteogenic differentiation of MC3T3-E1 cells. CircRNA sequencing was performed on the MC3T3-E1 cells induced by osteogenic differentiation medium for 1 d (negative control (NC) group) and 14 d (osteogenesis group). And mmu_circ_0000349 was verified using Sanger sequencing, ribonuclease R degradation, and actinomycin D assay. The function of mmu_circ_0000349 was validated by detecting the expressions of osteogenic differentiation markers, alkaline phosphatase (ALP), and runt-related transcription (RUNX2), via real-time quantitative PCR (qPCR) and Western blotting or ALP and alizarin red staining assay. Dual luciferase reporter gene assay confirmed the relationship between mmu_circ_0000349 and mmu-miR-138-5p (or mmu-miR-138-5p and JMJD3). Meanwhile, the JMJD3 binding to mmu_circ_0000349 was screened using an RNA pull-down assay. qPCR and Western blotting confirmed the effect of icariin on the mmu_circ_0000349/mmu-miR-138-5p/JMJD3 axis and osteogenic differentiation. As MC3T3-E1 osteogenic differentiation progressed, the JMJD3 expression level increased. A total of 361 circRNAs exhibited differences between the NC and osteogenesis groups. After validation, mmu_circ_0000349 was further analyzed as it exhibited the largest expression. And mmu_circ_0000349 was identified as a stable circular structure. Overexpression of mmu_circ_0000349 increased the expression levels of ALP and RUNX2, enhanced ALP activity, and increased the number of mineralized nodules; contrarily, inhibition of mmu_circ_0000349 exerted opposite effects. The data also confirmed that mmu_circ_0000349 regulated JMJD3 by sponging with mmu-miR-138-5p. With the increase in icariin concentration and time for treatment, the expression levels of mmu_circ_0000349, JMJD3, ALP, and RUNX2 also increased, whereas that of mmu-miR-138-5p decreased. In conclusion, Icariin promoted osteogenic differentiation by regulating the mmu_circ_0000349/mmu-miR-138-5p/JMJD3 pathway. Therefore, this provides a theoretical basis for the treatment of diseases related to osteogenic differentiation.

Osteogenic Differentiation Capacity of Dental Pulp Stem Cells on 3D Printed Polyurethane/Boric Acid Scaffold.

Additive manufacturing is growing in the area of dentistry and orthopedics due to the potential for the fabrication of individual implants. In this study, fused deposition modeling which is the most popular method was used to produce 3D scaffolds having a grid pattern from the polyurethane (PU) filament. Then, this scaffold was coated with boric acid (BA) with the thermionic vacuum arc technique. The microstructure analysis showed the macro-pores having a dimension of ~ 0.16 mm2. The BA coating increased the roughness in adverse decreased the wettability. The presence of BA on the scaffold before and after cell culture was confirmed by FESEM-EDS and ATR-FTIR. The Cell proliferation and osteogenic differentiation capacity of dental pulp stem cells (DPSCs) on uncoated and coated printed 3D PU scaffolds were also investigated. On the third day, cell viability was found to be higher (1.3-fold) in the groups containing BA. However, on the seventh day, the increase in cell proliferation in the PU+BA group was found to be less than in the other groups. According to Ca deposition analysis and Alizarin Red staining, PU+BA increased the calcium accumulation in the cells in both osteogenic induced and non-induced conditions at day 14. According to gene expression analysis, the Runx2 expression was not detected in PU+BA groups with and without differentiation medium (p ≤0.05). The expression of OCN was persistently increased up to 21-fold and 48-fold in cells on PU and PU+BA in osteogenic differentiation medium group after 14 days compared to control group (p ≤0.05). DSPP expression was observed only in PU+BA in osteogenic differentiation medium group. In line with the results that we have obtained, our 3D printed scaffolds have properties to trigger the differentiation of DPSCs cells in terms of osteogenicity.

Ultrasound cavitation: a reliable non-enzymatic method for adipose-derived mesenchymal stem cell (ADSC) isolation

BackgroundAdipose tissue is known to serve as an abundant and readily accessible source of adipose-derived stem cells (ADSCs) as an alternative to bone marrow. Collagenase is one of the most widely used methods for the isolation of ADSCs from adipose tissue, but it takes a long time, and there are also debates about safety. We propose an ultrasonic cavitation-treated method that can significantly reduce time and avoid the problem of using xenogeneic enzymes in ADSCs isolation.MethodsADSCs were isolated from adipose tissue using the enzyme treatment method and the ultrasonic cavitation treatment method. Cell proliferation was measured using cell viability assay. The expression levels of the surface markers of ADSCs were estimated by real-time PCR. After, ADSCs were cultured in chondrogenic, osteogenic, or adipogenic differentiation medium; the differentiation potential of ADCSs was analyzed by Alcian blue, Alizarin Red S, Oil Red O, and real-time PCR.ResultsThe cells treated with collagenase and ultrasound had similar cell yields and proliferation after isolation. The difference in the expression of surface markers of ADSCs was not statistically significant. ADSCs showed differentiation potential into adipocytes, osteocytes, and chondrocytes, and there was no difference between the enzyme treatment method and the ultrasonic cavitation treatment method. The yield of the ADSC increased in time- and intensity dependently.ConclusionsUltrasound certainly serves as a promising method in advancing ADSC isolation technology.

Preparation, characterization and biocompatibility of calcium peroxide-loaded polycaprolactone microparticles.

To explore the physicochemical characteristics and biocompatibility of calcium peroxide (CPO)-loaded polycaprolactone (PCL) microparticle. The CPO/PCL particles were prepared. The morphology and elemental distribution of CPO, PCL and CPO/PCL particles were observed with scanning electron microscopy and energy dispersive spectroscopy, respectively. Rat adipose mesenchymal stem cells were isolated and treated with different concentrations (0.10%, 0.25%, 0.50%, 1.00%) of CPO or CPO/PCL particles. The mesenchymal stem cells were cultured in normal media or osteogenic differentiation media under the hypoxia/normoxia conditions, and the amount of released O2 and H2O2 after CPO/PCL treatment were detected. The gene expressions of alkaline phosphatase (ALP), Runt-associated transcription factor 2 (RUNX2), osteopontin (OPN) and osteocalcin (OCN) were detected by realtime RT-PCR. SD rats were subcutaneously injected with 1.00% CPO/PCL particles and the pathological changes and infiltration of immune cells were observed with HE staining and immunohistochemistry at day 7 and day 14 after injection. Scanning electron microscope showed that CPO particles had a polygonal structure, PCL particles were in a small spherical plastic particle state, and CPO/PCL particles had a block-like crystal structure. Energy dispersive spectroscopy revealed that PCL particles showed no calcium mapping, while CPO/PCL particles showed obvious and uniform calcium mapping. The concentrations of O2 and H2O2 released by CPO/PCL particles were lower than those of CPO group, and the oxygen release time was longer. The expressions of Alp, Runx2, Ocn and Opn increased with the higher content of CPO/PCL particles under hypoxia in osteogenic differentiation culture and normal culture, and the induction was more obvious under osteogenic differentiation conditions (all P<0.05). HE staining results showed that the muscle tissue fibers around the injection site were scattered and disorderly distributed, with varying sizes and thicknesses at day 7 after particle injection. Significant vascular congestion, widened gaps, mild interstitial congestion, local edema, inflammatory cell infiltration, and large area vacuolization were observed in some tissues of rats. At day 14 after microparticle injection, the muscle tissue around the injection site and the tissue fibers at the microparticle implantation site were arranged neatly, and the gap size was not thickened, the vascular congestion, local inflammatory cell infiltration, and vacuolization were significantly improved compared with those at day 7. The immunohistochemical staining results showed that the expressions of CD3 and CD68 positive cells significantly increased in the surrounding muscle tissue, and were densely distributed in a large area at day 7 after particle injection. At day 14 of microparticle injection, the numbers of CD3 and CD68 positive cells in peripheral muscle tissue and tissue at the site of particle implantation were lower than those at day 7 (all P<0.01). CPO/PCL particles have good oxygen release activity, low damage to tissue, and excellent biocompatibility.

Osteogenic microenvironment affects palatal development through glycolysis

Palate development involves various events, including proliferation, osteogenic differentiation, and epithelial-mesenchymal transition. Disruption of these processes can result in the cleft palate (CP). Mouse embryonic palatal mesenchyme (MEPM) cells are commonly used to explore the mechanism of palatal development and CP. However, the role of the microenvironment in the biological properties of MEPM cells, which undergoes dynamic changes during palate development, is rarely reported. In this study, we investigated whether there were differences between the palatal shelf mesenchyme at different developmental stages. Our results found that the palatal shelves facilitate proliferation at the early palate stage at mouse embryonic day (E) 13.5 and the tendency towards osteogenesis at E15.5, the late palate development stage. And the osteogenic microenvironment, which was mimicked by osteogenic differentiation medium (OIM), affected the biological properties of MEPM cells when compared to the routine medium. Specifically, MEPM cells showed slower proliferation, shorter S phase, increased apoptosis, and less migration distance after osteogenesis. E15.5 MEPM cells were more sensitive than E13.5, showing an earlier change. Moreover, E13.5 MEPM cells had weaker osteogenic ability than E15.5, and both MEPM cells exhibited different Lactate dehydrogenase A (LDHA) and Cytochrome c (CytC) expressions in OIM compared to routine medium, suggesting that glycolysis might be associated with the influence of the osteogenic microenvironment on MEPM cells. By comparing the stemness of the two cells, we investigated that the stemness of E13.5 MEPM cells was stronger than that of E15.5 MEPM cells, and E15.5 MEPM cells were more like differentiated cells than stem cells, as their capacity to differentiate into multiple cell fates was reduced. E13.5 MEPM cells might be the precursor cells of E15.5 MEPM cells. Our results enriched the understanding of the effect of the microenvironment on the biological properties of E13.5 and E15.5 MEPM cells, which should be considered when using MEPM cells as a model for palatal studies in the future.

Comparison of Osteogenic Capacity and Osteoinduction of Adipose Tissue-Derived Cell Populations.

Stromal vascular fraction (SVF) is the primary isolate obtained after enzymatic digestion of adipose tissue that contains various cell types. Its successful application for cell-based construct preparation in an intra-operative setting for clinical bone augmentation and regeneration has been previously reported. However, the performance of SVF-based constructs compared with traditional ex vivo expanded adipose tissue-derived mesenchymal stromal cells (ATMSCs) remains unclear and direct comparative analyses are scarce. Consequently, we here aimed at comparing the in vitro osteogenic differentiation capacity of donor-matched SVF versus ATMSCs as well as their osteoinductive capacity. Human adipose tissue from nine different donors was used to isolate SVF, which was further purified via plastic-adherence to obtain donor-matched ATMSCs. Both cell populations were immunophenotypically characterized for mesenchymal stromal cell, endothelial, and hematopoietic markers after isolation and immunocytochemical staining was used to identify different cell types during prolonged cell culture. Based on normalization using plastic-adherence fraction determination, SVF and ATMSCs were seeded and cultured in osteogenic differentiation medium for 28 days. Further, SVF and ATMSCs were seeded onto devitalized bovine bone granules and subcutaneously implanted into nude mice. After 42 days of implantation, granules were retrieved, histologically processed, and stained with hematoxylin and eosin (HE) to assess ectopic bone formation. The ATMSCs were shown to be a homogenous cell population during cell culture, whereas SVF cultures consisted of multiple cell types. All donor-matched comparisons showed either accelerated or stronger mineralization for SVF cultures in vitro. However, neither SVF nor ATMSCs loaded on devitalized bone granules induced ectopic bone formation on subcutaneous implantation, as opposed to control granules loaded with bone morphogenetic protein-2 (BMP-2), which triggered ectopic bone formation with 100% incidence. Despite the observed lack of osteoinduction, our findings provide important in vitro evidence on the osteogenic superiority of intra-operatively available SVF as compared with donor-matched ATMSCs. Consequently, further studies should focus on optimizing the efficacy of these cell populations for implementation in orthotopic bone fracture or defect treatment.

Topographical evaluation of human mesenchymal stem cells during osteogenic differentiation using scanning ion conductance microscopy

Human mesenchymal stem cells (hMSCs) have attracted considerable attention as valuable cell sources for regenerative medicine in various diseases. Osteogenic differentiation is one of the capabilities of hMSCs that is critical to their clinical applications. Morphological measurements are essential for monitoring hMSC osteogenic differentiation because they are non-destructive and conserve valuable cell sources. However, the three-dimensional topography of cells during differentiation has not been fully investigated. Here, we quantified the time-course changes in hMSC topography during osteogenic differentiation using scanning ion conductance microscopy (SICM). Rapidly expanding clone (REC), an hMSC subpopulation with high proliferation and differentiation potencies, and conventional hMSCs (cMSCs) were used as the hMSC sources. In the osteogenic differentiation medium, RECs and cMSCs showed lower cell heights than those in the undifferentiation medium, indicating the occurrence of morphological changes during the osteogenic differentiation. Interestingly, during differentiation, RECs exhibited a low height at the beginning of the culture period (day 1), while the height of cMSCs gradually decreased, implying that RECs had a higher differentiation capacity than cMSCs. The three-dimensional topographical information will contribute to a deeper understanding of hMSC osteogenic differentiation and may become an important differentiation indicator in future clinical applications.

MYC promotes fibroblast osteogenesis by regulating ALP and BMP2 to participate in ectopic ossification of ankylosing spondylitis

BackgroundEctopic ossification is an important cause of disability in patients with ankylosing spondylitis (AS). Whether fibroblasts can transdifferentiate into osteoblasts and contribute to ossification remains unknown. This study aims to investigate the role of stem cell transcription factors (POU5F1, SOX2, KLF4, MYC, etc.) of fibroblasts in ectopic ossification in patients with AS.MethodsPrimary fibroblasts were isolated from the ligaments of patients with AS or osteoarthritis (OA). In an in vitro study, primary fibroblasts were cultured in osteogenic differentiation medium (ODM) to induce ossification. The level of mineralization was assessed by mineralization assay. The mRNA and protein levels of stem cell transcription factors were measured by real-time quantitative PCR (q-PCR) and western blotting. MYC was knocked down by infecting primary fibroblasts with lentivirus. The interactions between stem cell transcription factors and osteogenic genes were analysed by chromatin immunoprecipitation (ChIP). Recombinant human cytokines were added to the osteogenic model in vitro to evaluate their role in ossification.ResultsWe found that MYC was elevated significantly in the process of inducing primary fibroblasts to differentiate into osteoblasts. In addition, the level of MYC was remarkably higher in AS ligaments than in OA ligaments. When MYC was knocked down, the expression of the osteogenic genes alkaline phosphatase (ALP) and bone morphogenic protein 2 (BMP2) was decreased, and the level of mineralization was reduced significantly. In addition, the ALP and BMP2 were confirmed to be the direct target genes of MYC. Furthermore, interferon-γ (IFN-γ), which showed high expression in AS ligaments, was found to promote the expression of MYC in fibroblasts in the process of ossification in vitro.ConclusionsThis study demonstrates the role of MYC in ectopic ossification. MYC may act as the critical bridge that links inflammation with ossification in AS, thus providing new insights into the molecular mechanisms of ectopic ossification in AS.