Orthogonal Frequency Division Multiplexing Based On Offset Quadrature Amplitude Modulation Research Articles

Review of Channel Estimation for Candidate Waveforms of Next Generation Networks

The advancement in wireless communication applications encourages the use of effective and efficient channel estimation (CE) techniques because of the varying behaviour of the Rayleigh fading channel. In most cases, the emphasis of most proposed CE schemes is to improve the CE performance and complexity for ensuring quality signal reception and improved system throughput. Candidate waveforms whose designs are based on filter bank multi-carrier (FBMC) modulation techniques such as filter bank orthogonal frequency division multiplexing based on offset quadrature amplitude modulation (OFDM-OQAM), universal filtered multicarrier (UFMC) and generalised frequency division multiplexing based on offset quadrature amplitude modulation (GFDM-OQAM) are no exception to the use of these proposed CE techniques in the literature. These schemes are considered as potential waveform candidates for the physical/media access control layer of the emerging fifth generation (5G) networks. Therefore, pinpoint CE techniques represent an important requirement for these waveforms to attain their full potentials. In this regard, this paper reviews the concept of CE as applicable to these waveforms as well as other waveform candidates under consideration in the emerging 5G networks. Since the design of the majority of the waveform candidates is filter based, a review of the general filter design considerations is presented in this paper. Secondly, we review general CE techniques for candidate waveforms of next generation networks and classify some of the studied CE techniques. In particular, we classify the CE schemes used in filter bank OFDM-OQAM and GFDM-OQAM based transceivers and present a performance comparison of some of these CE schemes. Besides, the paper reviews the performances of two linear CE schemes and three adaptive based CE schemes for two FBMC based waveform candidates assuming near perfect reconstruction (NPR) and non-perfect reconstruction (Non-PR) filter designs over slow and fast frequency selective Rayleigh fading channels. The results obtained are documented through computer simulations, where the performances of the studied CE schemes in terms of the normalised mean square error (NMSE) are analysed. Lastly, we summarise the findings of this work and suggest possible research directions in order to improve the potentials of the studied candidate waveforms over Rayleigh fading channels.

Improved Interference Cancelation Channel Estimation Method in OFDM/OQAM System

To the significant amount of pilot overhead of the interference cancelation methods in orthogonal frequency division multiplexing (OFDM) based on offset quadrature amplitude modulation (OFDM/OQAM) system, we proposed an improved interference cancelation method (ICM) for OFDM/OQAM system in this paper. In this method, we use the auxiliary pilot (AP) to eliminate the influence of the intersymbol interference on channel estimation, which can reduce the pilot overhead of OFDM/OQAM system significantly. At the same time, to improve the channel estimation performance, we analyze the source of the intrinsic interference of system and its distribution in time and frequency domain, then, we reset the interference cancelation range of AP, which can cancel more intrinsic interference for OFDM/OQAM system. According to the results of performance analysis, compared to the conventional interference cancelation methods, the proposed method performs better in terms of energy efficiency and spectral efficiency. Also, the simulation results of the proposed method show that the proposed method can outperform traditional interference cancelation methods in channel estimation performance.

Joint frequency offset, time offset, and channel estimation for OFDM/OQAM systems

Among the multicarrier modulation techniques considered as an alternative to orthogonal frequency division multiplexing (OFDM) for future wireless networks, a derivative of OFDM based on offset quadrature amplitude modulation (OFDM/OQAM) has received considerable attention. In this paper, we propose an improved joint estimation method for carrier frequency offset, sampling time offset, and channel impulse response, needed for the practical application of OFDM/OQAM. The proposed joint ML estimator instruments a pilot-based maximum-likelihood (ML) estimation of the unknown parameters, as derived under the assumptions of Gaussian noise and independent input symbols. The ML estimator formulation relies on the splitting of each received pilot symbol into contributions from surrounding pilot symbols, non-pilot symbols and additive noise. Within the ML framework, the Cramer-Rao bound on the covariance matrix of unbiased estimators of the joint parameter vector under consideration is derived as a performance benchmark. The proposed method is compared with a highly cited previous work. The improvements in the results point to the superiority of the proposed method, which also performs close to the Cramer-Rao bound.

Blind CFO Estimation for OFDM/OQAM Systems Over Doubly-Selective Fading Channels

Orthogonal Frequency Division Multiplexing based on Offset Quadrature Amplitude Modulation (OFDM/OQAM) systems are highly sensitive to Carrier Frequency Offset (CFO), especially in doubly selective fading channels. In this paper, by modeling the doubly selective channel with Basis Expansion Model (BEM), we prove the cyclostationarity of the received OFDM/OQAM signal in the presence of CFO. A blind CFO estimator is proposed based on the derived close-form second-order cyclic statistic. Analysis and simulation results demonstrate that the proposed estimator provides robust CFO estimation performance in OFDM/OQAM systems over doubly selective fading channels.

Transmission of 100-Gb/s DDO-OFDM/OQAM over 320-km SSMF with a single photodiode.

In this paper, we propose a novel approach to simultaneously receive multi-band 100-Gb/s direct-detection optical signal with only one polarization and one conventional 40-GHz photodiode. The modulation format of orthogonal frequency-division multiplexing based on offset quadrature amplitude modulation (OFDM/OQAM) is selected to provide signal spectrum with high side-lobe suppression ratio, which can effectively reduce the electrical sub-band frequency interference. The whole 100-Gb/s OFDM/OQAM signal is comprised of 6 sub-bands with 16- and 32-QAM formats loading. Only one guard band is required to accommodate the overlapped 6-band signal-to-signal beat interference (SSBI). The receiver bandwidth is mainly limited by the digital storage oscilloscope (DSO) of 33 GHz. The transmission distance over standard single mode fiber (SSMF) is up to 320 km.