Orientation Of Interfacial Water Molecules Research Articles

Cholesterol Changes Interfacial Water Alignment in Model Cell Membranes.

The nanoscopic layer of water that directly hydrates biological membranes plays a critical role in maintaining the cell structure, regulating biochemical processes, and managing intermolecular interactions at the membrane interface. Therefore, comprehending the membrane structure, including its hydration, is essential for understanding the chemistry of life. While cholesterol is a fundamental lipid molecule in mammalian cells, influencing both the structure and dynamics of cell membranes, its impact on the structure of interfacial water has remained unknown. We used surface-specific vibrational sum-frequency generation spectroscopy to study the effect of cholesterol on the structure and hydration of monolayers of the lipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), and egg sphingomyelin (SM). We found that for the unsaturated lipid DOPC, cholesterol intercalates in the membrane without significantly changing the orientation of the lipid tails and the orientation of the water molecules hydrating the headgroups of DOPC. In contrast, for the saturated lipids DPPC and SM, the addition of cholesterol leads to clearly enhanced packing and ordering of the hydrophobic tails. It is also observed that the orientation of the water hydrating the lipid headgroups is enhanced upon the addition of cholesterol. These results are important because the orientation of interfacial water molecules influences the cell membranes' dipole potential and the strength and specificity of interactions between cell membranes and peripheral proteins and other biomolecules. The lipid nature-dependent role of cholesterol in altering the arrangement of interfacial water molecules offers a fresh perspective on domain-selective cellular processes, such as protein binding.

Electric field as a crystallization switch of heterogeneous ice formation

Using molecular dynamics simulations, we investigated the effect of external electric field on ice formation with the present of a substrate surface. It turns out that the electric field can affect the ice formation on substrate surface by altering the dipole orientation of interfacial water molecules (IWs): a crossover from inhibiting to promoting ice formation with the increase of electric field strength. According to the influence of the electric field on ice formation, the electric field strength range of 0.0 V nm−1–7.0 V nm−1 can be divided into three regions. In the region I and region III, there are both ice formation on the substrate surface. While, the behavior of IWs in the region I and region III are distinguished, including the arrangements of oxygen atoms and the dipole orientation distribution. In region II, ice formation does not occur in the system within 5 × 200 ns simulations. The IWs show a disorder structure, preventing the ice formation process on substrate. The interfacial water molecular orientation distribution and two-dimensional free energy landscape reveals that the electric field can alter the dipole orientation of the interfacial water and lead a free energy barrier, making the ice formation process harder. Our result demonstrates the external electric field can regulate the behavior of IWs, and further affect the ice formation process. The external electric field act as a crystallization switch of ice formation on substrate, shedding light into the studies on the control of ice crystallization.

Observation of Strong Synergy in the Interfacial Water Response of Binary Ionic and Nonionic Surfactant Mixtures.

Interfacial vibrational footprints of the binary mixture of sodium dodecyl sulfate (SDS) and hexaethylene glycol monododecyl ether (C12E6) were probed using heterodyne detected vibrational sum frequency generation (HDVSFG). Our results show that in the presence of C12E6 at CMC (70 μM) the effect of SDS on the orientation of interfacial water molecules is enhanced 10 times compared to just pure surfactants. The experimental results contest the traditional Langmuir adsorption model predictions. This is also evidenced by our molecular dynamics simulations that show a remarkable restructuring and enhanced orientation of the interfacial water molecules upon DS- adsorption to the C12E6 surface. The simulations show that the adsorption free energy of DS- ions to a water surface covered with C12E6 is an enthalpy-driven process and more attractive by ∼10 kBT compared to the adsorption energy of DS- to the surface of pure water.

Effects of the Chemical and Structural Properties of Silane Monolayers on the Organization of Water Molecules and Ions at Interfaces, from Molecular Dynamics Simulations.

Understanding the organization of the hydration layer at functionalized silica surfaces is relevant for a large range of biosensing applications or surface phenomena such as biomolecule adsorption. Silane monolayers are widely used to functionalize silica surfaces. Using molecular dynamics simulations, we have investigated the role of silane molecule head-group charge, alkyl chain length, and surface coverage in the structural organization and dynamic properties of Na+ ions, Cl- ions, and water molecules at the interface. The silane molecules studied are 3-aminopropyldimethylethoxysilane, n-propyldimethylmethoxysilane, octadecyldimethylmethoxysilane, and (dimethylamino)dimethylsilylundecanoate. Our results suggest that the distribution of interfacial ions is sensitive to the 2D dispersion of the silane-charged head groups. Also, while charged silane monolayers show a strong orientation of interfacial water molecules, which leads to a rupture in the hydrogen bond network and disturbs their tetrahedral organization, the arrangement of water molecules at the interface with uncharged silane monolayers seems to be related to the surface roughness and to alkyl chain length. In line with these results, the diffusion of ions and water molecules is higher at the CH3 long monolayer interface than at the CH3 short monolayer interface and at the charged monolayer interfaces. Also, whatever the silane molecules studied, bulk properties are recovered around 0.7 nm above the interface. The interfacial water organization is known to impact biomolecule adsorption. Therefore, these results could further help in optimizing the functionalization layers to capture analytes.

Interfacial Water Structure at Zwitterionic Membrane/Water Interface: The Importance of Interactions between Water and Lipid Carbonyl Groups.

In this work, atomistic molecular dynamics (MD) simulations of palmitoyl-oleoyl-phosphatidylcholine (POPC) bilayer were carried out to investigate the effect of water models on membrane dipole potential, which is primarily associated with the preferential orientation of molecular dipoles at the membrane–water interface. We discovered that the overestimation of the dipole potential by the TIPS3P water model can be effectively reduced by the TIP4P water model. On the one hand, the TIP4P water model decreases the negative contribution of lipid to the dipole potential through influencing the orientation of lipid headgroups. On the other hand, the TIP4P water model reduces the positive contribution of water to the dipole potential by increasing the preference of H-down orientation (the water dipole orients toward the bilayer center). Interestingly, the TIP4P water model affects the orientation of interfacial water molecules more obviously than that of lipid headgroups, leading to the decrease in the dipole potential. Furthermore, the MD results revealed that the water close to the positively charged choline (namely, N-associated water) prefers the H-down orientation while the water around the negatively charged phosphate (namely, P-associated water) favors the H-up orientation, in support of recent experimental and MD studies. However, interfacial water molecules are more strongly influenced by the phosphate groups than by the choline groups, resulting in the net H-up orientation (the water dipole orients toward the bilayer center) in the region of lipid headgroups. In addition, it is intriguing that the preference of H-up orientation decreases when water molecules penetrate more deeply into the lipid bilayer. This is attributed to the counteracting effect of lipid carbonyl groups, and the effect varies with the lipid chains (oleoyl and palmitoyl chains), suggesting the important role of lipid carbonyl groups.

Surface Characterization of Colloidal Silica Nanoparticles by Second Harmonic Scattering: Quantifying the Surface Potential and Interfacial Water Order.

The microscopic description of the interface of colloidal particles in solution is essential to understand and predict the stability of these systems, as well as their chemical and electrochemical reactivity. However, this description often relies on the use of simplified electrostatic mean field models for the structure of the interface, which give only theoretical estimates of surface potential values and do not provide properties related to the local microscopic structure, such as the orientation of interfacial water molecules. Here we apply polarimetric angle-resolved second harmonic scattering (AR-SHS) to 300 nm diameter SiO2 colloidal suspensions to experimentally determine both surface potential and interfacial water orientation as a function of pH and NaCl concentration. The surface potential values and interfacial water orientation change significantly over the studied pH and salt concentration range, whereas zeta-potential (ζ) values remain constant. By comparing the surface and ζ-potentials, we find a layer of hydrated condensed ions present in the high pH case, and for NaCl concentrations ≥1 mM. For milder pH ranges (pH < 11), as well as for salt concentrations <1 mM, no charge condensation layer is observed. These findings are used to compute the surface charge densities using the Gouy–Chapman and Gouy–Chapman–Stern models. Furthermore, by using the AR-SHS data, we are able to determine the preferred water orientation in the layer directly in contact with the silica interface. Molecular dynamics simulations confirm the experimental trends and allow deciphering of the contributions of water layers to the total response.

Molecular mechanism of charge inversion revealed by polar orientation of interfacial water molecules: A heterodyne-detected vibrational sum frequency generation study.

"Charge inversion" is a phenomenon in which multivalent counterions overcompensate for interfacial charges and invert the sign of the net charge near a surface. This phenomenon is believed to be relevant to biologically important processes such as DNA condensation, and hence it has attracted much attention. We investigated the polar orientation of interfacial water molecules at two different negatively charged interfaces in the absence and presence of La3+ using heterodyne-detected vibrational sum frequency generation spectroscopy, which can directly determine the up/down orientation of interfacial molecules. It was found that the orientations of water molecules at a bio-relevant phospholipid interface change from the hydrogen-up to the hydrogen-down with the addition of 10 µM La3+. This change of water orientation indicates that the net charge at the phospholipid interface is inverted by adsorption of La3+ to the phosphate headgroup. By contrast, at an alkylsulfate interface, the majority of the interfacial water molecules remain hydrogen-up orientated even in the presence of 25 mM La3+, indicating that the sulfate headgroup is still solvated by up-oriented water. The observed headgroup specificity suggests that charge inversion at the phospholipid interface originates primarily from the chemical interaction between the phosphate and La3+ ion.

Vibrational Sum-Frequency Generation Study of Morpholine at Air–Liquid and Air–Solution Interfaces

The structure and orientation of interfacial morpholine molecules have been investigated, using vibrational sum-frequency generation (VSFG) spectroscopy—a nonlinear surface specific technique. The VSFG spectra with SSP and PPP polarizations have been measured in the CH (2800–3000 cm–1) and the OH (3000–3750 cm–1) stretch regions at the air–morpholine and air–solution interfaces. The vibrational frequencies in the CH stretch region could be observed in VSFG spectra, implying presence of morpholine molecules at the interfaces with net polar orientation. The intensities of the CH stretch bands get enhanced at the air–solution interface of morpholine solution in millimolar concentration, in comparison to that at the air–morpholine interface which is attributed to increase in polar orientation of interfacial morpholine molecules induced by water molecules. In pure morpholine, the most predominant conformation of molecules is equatorial chair, both in the bulk and at the air–morpholine interface. But in aqueous solution of morpholine, the contribution from axial chair conformer is known to increase. This effect, and also a probable change from the chair to the boat/twist boat conformation at the air–solution interface, may contribute to the enhanced intensity of VSFG peaks of CH stretch bands in solution. The VSFG intensities of the OH stretching frequencies of interfacial water molecules are also enhanced in the presence of morpholine, suggesting an increase in net polar orientation of water molecules induced by morpholine molecules. The VSFG spectra were also measured in the presence of 300 mM HCl, which showed indications of protonation of the interfacial morpholine molecules. Addition of HCl to aqueous solution of morpholine alters the orientation of interfacial water molecules significantly, and the enhanced VSFG intensities in the OH region induced by morpholine molecules are almost completely obliterated. The result suggests that orientation of interfacial water molecules in the presence of HCl gets random. However, the effects of HCl in the CH region of the VSFG spectra differ for different stretching bands. In presence of readily ionizable HCl molecules, a large number of ions are generated, which are probably responsible for changing the surface orientation of both water and morpholine molecules.

Vibrational sum–frequency generation spectroscopy of ionic liquid 1‐butyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate at the air–water interface

The structure and orientation of room temperature ionic liquid (RTIL) 1‐butyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate [PF3(C2F5)3], commonly known as [bmim][fap], have been investigated at the air−[bmim][fap] and air–water interfaces, employing vibrational sum–frequency generation (VSFG) spectroscopy. The VSFG spectra in the CH stretch region suggest presence of the [bmim] cation at the interfaces. Studies reveal that the butyl chain protrudes out into air, and the imidazolium ring lies almost planar to the interface. The CH stretch intensities get enhanced at the air–water interface, mainly because of polar orientation of imidazolium cation induced by interfacial water molecules. The OH stretch intensities are also enhanced at the air–water interface due to polar orientation of interfacial water molecules induced by [bmim][fap]. The Brewster angle microscopy suggests self aggregation of [bmim][fap] in the presence of water, and the aggregation becomes extensive showing dense surface domains with time. However, the surface pressure is almost unaffected due to aggregation.

Interfacial effects on the band edges of functionalized si surfaces in liquid water.

By combining ab initio molecular dynamics simulations and many-body perturbation theory calculations of electronic energy levels, we determined the band edge positions of functionalized Si(111) surfaces in the presence of liquid water, with respect to vacuum and to water redox potentials. We considered surface terminations commonly used for Si photoelectrodes in water splitting experiments. We found that, when exposed to water, the semiconductor band edges were shifted by approximately 0.5 eV in the case of hydrophobic surfaces, irrespective of the termination. The effect of the liquid on band edge positions of hydrophilic surfaces was much more significant and determined by a complex combination of structural and electronic effects. These include structural rearrangements of the semiconductor surfaces in the presence of water, changes in the orientation of interfacial water molecules with respect to the bulk liquid, and charge transfer at the interfaces, between the solid and the liquid. Our results showed that the use of many-body perturbation theory is key to obtain results in agreement with experiments; they also showed that the use of simple computational schemes that neglect the detailed microscopic structure of the solid-liquid interface may lead to substantial errors in predicting the alignment between the solid band edges and water redox potentials.

Alumina(0001)/Water Interface: Structural Properties and Infrared Spectra from First-Principles Molecular Dynamics Simulations

We investigated the atomic structure and infrared spectra of the alumina(0001)/water interface, using first-principles molecular dynamics simulations based on density functional theory within the generalized gradient approximation. The computed structural properties of the interface are in good agreement with the results of synchrotron X-ray experiments. Detailed analyses of the computed infrared spectra revealed two types of water molecules at the hydrophilic oxide/water interface: molecules participating in strong “ice-like” hydrogen bonding with the oxide surface and molecules involved in weaker “liquid-like” hydrogen bonding. Our results provide a molecular interpretation of the “ice-like” and “liquid-like” bands observed in sum-frequency vibrational spectroscopy experiments and underscore the significance of strong hydrogen-bonding interactions in determining the orientation of interfacial water molecules.

Influence of Hydrogen Bonding on the Structure of the (001) Corundum–Water Interface. Density Functional Theory Calculations and Monte Carlo Simulations

Density functional theory calculations and classical Monte Carlo simulations are applied to study the behavior of water in contact with a hydroxylated corundum (001) surface. Using DFT with periodic boundary conditions at T = 0 K, we systematically study the influence of the number of water molecules on the surface geometry and on the structure of the contact water layer. Only little effect of the thickness of the water layer on the geometry of the surface hydroxyl groups is observed. On the other hand, the molecules in the second layer have strong influence on the arrangement of water molecules in direct contact with the solid surface. In order to mimic macroscopic systems at room temperature, we perform inhomogeneous MC simulations of model corundum surface in contact with the water phase modeled by SPC/E model. The water molecules are classified according to their hydrogen-bonded partners into several groups. It is found that the preferential orientation of interfacial water molecules is primarily determined by the type of their hydrogen bonding. The hydroxyl groups at the corundum surface can serve as hydrogen bond donor or acceptor, depending on their orientation. No surface hydroxyls are found to coordinate two water molecules at the same time. On the other hand, water molecules coordinated by two different surface groups appear in MC simulations.

Dynamic Behavior of Interfacial Water at the Silica Surface

Molecular dynamics simulations were employed to study the dynamic properties of water at the silica−liquid interface at ambient temperature. Three different degrees of hydroxylation of a crystalline silica surface were used. To assess the water dynamic properties we calculated the residence probability and in-plane mean-square displacement as a function of distance from the surface. The data indicate that water molecules at the fully hydroxylated surface remain longer, on average, in the interfacial region than in the other cases. By assessing the dynamics of molecular dipole moment and hydrogen−hydrogen vector an anisotropic reorientation was discovered for interfacial water in contact with any of the surfaces considered. However, the features of the anisotropic reorientation observed for water molecules depend strongly on the relative orientation of interfacial water molecules and their interactions with surface hydroxyl groups. On the partially hydroxylated surface, where water molecules with hydrogen-...

Variation of Ionic Strength Reveals the Interfacial Water Structure at a Charged Mineral Surface

We have used visible-infrared sum-frequency generation spectroscopy to study the structure of water molecules that form the interface with fused silica. Spectra throughout the OH-stretching region were collected in two different polarization schemes so that the orientation of interfacial water molecules could be studied. A depth profiling experiment was performed by varying the ionic strength, thereby peeling away the outskirts of this interfacial region, leaving water molecules progressively closer to the charged interface. As the ionic strength increases, the spectral intensity drops since the interfacial region is becoming thinner. However, we notice a change in the relative contribution of tetrahedrally coordinated molecules compared to those that make less hydrogen bonds. We have the opportunity to study these two water species individually; we conclude that the higher coordination species exists some distance away from the interface and is oriented close to the plane of the surface with a mean tilt ...

Water at polar and nonpolar solid walls (Review)

Recent progress in simulating the properties of interfacial water at hard hydrophobic and hydrophilic surfaces is reviewed and compared to results for the air/water interface. The authors discuss static properties such as the equilibrium contact angle, the depletion layer thickness, and the orientation of interfacial water molecules. Relations between these properties, e.g., the relation between the contact angle and the thickness of the depletion layer which is experimentally observed on hydrophobic surfaces, are emphasized. For a hydrophilic sapphire surface, the authors discuss the influence of geometry and density of polar surface groups on the interfacial water structure. They discuss nonequilibrium effects arising in laminar shear flows, where the classic no-slip hydrodynamic boundary condition is violated at hydrophobic interfaces. They discuss the arising slip and relate it to static properties of the solid hydrophobic/water interface.

Understanding how organic solvent polarity affects water structure and bonding at halocarbon–water interfaces

Vibrational sum-frequency spectroscopy (VSFS) is employed here to study the bonding and structure of water molecules at the mixed halocarbon–water interface. Mixtures of non-polar CCl 4 with more polar solvents CHCl 3, dichloromethane (DCM), and 1,2-dichloroethane (DCE) are used to vary the polarity of the organic phase. The OH stretching modes of interfacial water molecules are used to characterize and compare the interactions between water and the different halocarbons in the organic phase. The spectroscopic results show differing degrees of interaction between water and the various halocarbon molecules in the interfacial region as manifested in spectral shifts and intensity changes in the OH stretching modes. The spectral observations indicate that as the organic phase is systematically increased in polarity with the addition of polar halocarbons, the interfacial water molecules display increased bonding interactions with the organic phase. This increased interaction between interfacial water and the interfacial halocarbons leads to a reduction in the strong orientation of interfacial water molecules that is so prevalent for water adjacent to non-polar organic liquids. The results provide important insights into water adjacent to a hydrophobic surface as that surface takes on increasingly polar characteristics.

Surfactant Adsorption at the Salt/Water Interface: Comparing the Conformation and Interfacial Water Structure for Selected Surfactants

We report in situ spectroscopic measurements monitoring the adsorption of a series of carboxylate surfactants onto the surface of the semisoluble, ionic solid fluorite (CaF2). We employ the surface-specific technique, vibrational sum-frequency spectroscopy (VSFS), to examine the effect that surfactant adsorption has on the bonding interactions and orientation of interfacial water molecules through the alteration of the electric properties in the interfacial region. In addition, we report on the chain length and headgroup dependence of the formation of hydrophobic self-assembled monolayers on the surface of the solid phase. Differences in chain length and headgroup functionality lead to large changes in the adsorption behavior and structuring of the monolayers formed and the interactions of interfacial water molecules with these monolayers. Fundamental studies such as these are essential for understanding the mechanisms involved in the surfactant adsorption process, information that is important for industrially relevant processes such as mineral ore flotation, waste processing, and petroleum recovery.

Sum frequency vibrational spectroscopy of leucine molecules adsorbed at air-water interface.

Sum frequency vibrational spectroscopy was used to study adsorption of leucine molecules at air-water interface from solutions with different concentrations and pH values. The surface density and the orientation of the isopropyl head group of the adsorbed leucine molecules could be deduced from the measurements. It was found that the orientation depends on the surface density, but only weakly on bulk pH value at the saturated surface density. The vibrational spectra of the interfacial water molecules appeared to be strongly affected by the charge state of the adsorbed leucine molecules. Enhancement and inversion of polar orientation of interfacial water molecules by surface charges or field controllable by the bulk pH value were observed.

Ordering of Interfacial Water Molecules at the Charged Air/Water Interface Observed by Vibrational Sum Frequency Generation

The molecular structure and orientation of interfacial water molecules at the air/water interface in the presence of soluble cationic and anionic surfactants has been characterized. We have employed vibrational sum frequency generation (VSFG) to probe the orientation of interfacial water molecules as a function of both bulk surfactant concentration and solution ion strength. The observed ordering of interfacial water molecules is manifested by an enhancement of the OH stretching modes in the VSFG spectra. We attribute the observed enhancement to an alignment of the interfacial water molecules induced by the large electrostatic field present at these charged interfaces. The nature of this enhancement is further explored by studying mixed (cationic and anionic) surfactant systems as well as surfactant systems at different ionic strengths. From these studies we find that the interfacial water molecules attain their highest degree of alignment at surface surfactant concentrations well below maximum surface co...

Multinuclear Magnetic Resonance Studies on Aqueous Suspensions of Synthetic Saponites

The structure at the liquid/solid interface of synthetic saponites is monitored by NMR methods. These results are compared with data obtained with a natural saponite. The mean orientation of interfacial water molecules is different for synthetic and natural saponites. Interaction of water molecules or counterions with the solid surface depends on the charge layer of the synthetic clays. Water/acetonitrile and sodium/tetrapropylammonium cation competitions have been studied. Significant changes of the orientation of interfacial water molecules and removal of sodium counterions are observed only with the lowest charged saponite.