Organic Solar Cell Devices Research Articles

Suppressing Exciton-Vibration Coupling via Intramolecular Noncovalent Interactions for Low-Energy-Loss Organic Solar Cells.

Minimizing energy loss is crucial for breaking through the efficiency bottleneck of organic solar cells (OSCs). The main mechanism of energy loss can be attributed to non-radiative recombination energy loss (ΔEnr) that occurs due to exciton-vibration coupling. To tackle this challenge, tuning intramolecular noncovalent interactions is strategically utilized to tailor novel fused ring electron acceptors (FREAs). Upon comprehensive analysis of both theoretical and experimental results, this approach can effectively enhance molecular rigidity, suppress structural relaxation, reduce exciton reorganization energy, and weakens exciton-vibration coupling strength. Consequently, the binary OSC device based on Y-SeSe, which features dual strong intramolecular Se···O noncovalent interactions, achieves an outstanding power conversion efficiency (PCE) of 19.49%, accompanied by an extremely small ΔEnr of 0.184 eV, much lower than those of Y-SS and Y-SSe based devices with weaker intramolecular noncovalent interactions. These achievements not only set an efficiency record for selenium-containing OSCs, but also mark the lowest reported ΔEnr value among high-performance binary devices. Furthermore, the ternary blend device showcases a remarkable PCE of 20.51%, one of the highest PCEs for single-junction OSCs. This work demonstrates the effectiveness of intramolecular noncovalent interactions in suppressing exciton-vibration coupling, thereby achieving low-energy-loss and high-efficiency OSCs.

Enhancing physicochemical durability and photoelectronic performance beyond bendable large-area organic photoelectronic devices through tailored multilayer interface

Photoelectronic devices, such as organic solar cells (OSCs) and organic photodetector (OPDs), play a crucial role in the development of renewable energy technologies, with an emphasis on achieving high efficiency, photoresponse and mechanical stability. This study presents a novel, annealing-free bilayer electron transport layer (ETL) comprising polyethyleneimine ethoxylated zinc oxide nanoparticles (PE-ZnO) and protonated polyethyleneimine (p-PEIE) for inverted flexible organic photoelectronic conversion devices, with significantly improves overall efficiency and mechanical durability. This novel ETL configuration demonstrated a not only increased the power conversion efficiency (PCE) of flexible OSC devices up to 15.50 %, but also demonstrated outstanding mechanical stability. In addition to bending-flexural stress, where the devices retained 96.95 % efficiency at 0.75 cm radius, sliding-shear stress were also conducted to simulate rollable device conditions. Remarkably, the bilayer ETL maintained approximately 97 % of its initial efficiency after 5000 sliding cycles. Additionally, the large-area flexible OSCs with an active area of 54 cm2, reached PCE of 12.63 %, proving to be 81.5 % as efficient as small-area flexible cells, demonstrating scalability and practical viability. The application of bilayer ETL in flexible OPDs also results in significant reduction in dark current, enhanced photoresponse, and excellent mechanical stability indicating a robust solution for both solar energy harvesting and light sensing technologies. These findings provide a universal solution for improving the physicochemical durability and photoelectronic performance of bendable large-area organic photoelectronic devices.

Regiospecific Incorporation of Fluorine Atoms in Polythiophene Derivatives for Efficient Organic Solar Cells.

Derivatives of polythiophene (PT) have garnered considerable attention in organic solar cells (OSCs) because of their relatively uncomplicated molecular structures and cost-effective synthesis. Herein, we have developed two regioisomeric fluorinated PT donors, PEI3T-FITVT and PEI3T-FOTVT, to realize efficient OSCs. PEI3T-FITVT and PEI3T-FOTVT are strategically designed with different fluorine atom arrangements on thiophene-vinyl-thiophene (TVT) units. Notably, PEI3T-FOTVT possesses enhanced backbone planarity induced by F···S noncovalent interactions between two constituent building blocks. Consequently, PEI3T-FOTVT with the higher aggregation and crystalline properties leads to a 2.5-fold increase in hole mobility over PEI3T-FITVT (from 1.4 × 10-4 to 3.6 × 10-4 cm2 V-1 s-1). Furthermore, PEI3T-FOTVT exhibits higher domain purity than PEI3T-FITVT, leading to faster charge transport and reduced charge recombination in OSC devices. These characteristics lead to a higher power conversion efficiency of 14.4% for PEI3T-FOTVT-based OSCs, compared to 12.9% for PEI3T-FITVT-based OSCs.

Enabling High‐Efficiency and Stable Binary Organic Solar Cells by Solid Additive‐Assisted Morphology Modulation

AbstractThe solid additive strategy represents a simple yet effective approach to achieving high‐efficiency organic solar cells (OSCs) by enhancing the morphology of the active layer. In this study, a highly volatile solid additive, 2,4,6‐trichloro‐1,3,5‐triazine (TCT), is employed to modulate the morphology. Unlike other solid additives previously reported, TCT exhibits remarkable intermolecular interactions with both polymer donor and acceptor, offering two distinct advantages. Firstly, TCT notably enhances the crystallinity and molecular order of the blend film, subtly optimizing the fiber network structure within, thereby facilitating carrier transport and significantly improving the mobility of the blend film. Secondly, TCT stabilizes the bi‐continuous fibrous morphology of the polymer donor and acceptor, mitigating the morphological evolution of the active layer and enhancing device stability. Consequently, the D18:L8‐BO:TCT device exhibits a higher power conversion efficiency of 19.50% compared to the D18:L8‐BO device (18.13%). Furthermore, after 960 h of storage, the OSC device treated with TCT retains 90% of its initial PCE, significantly outperforming the D18:L8‐BO device (73%). This study presents a promising avenue for achieving high‐performance OSCs through manipulating the active layer morphology with solid additives.

Isomeric Dimer Acceptors for Stable Organic Solar Cells with over 19 % Efficiency

AbstractThe strategy of isomerization is known for its simple yet effective role in optimizing molecular configuration and enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). However, the impact of isomerization on the design of dimer acceptors has been rarely investigated, and the relationship between the chemical structure and optoelectronic property remains unclear. In this study, we designed and synthesized two dimer acceptor isomers named D‐TPh and D‐TN, which differ in the positional arrangement of their end capping groups. Compared to D‐TN, D‐TPh exhibited enhanced backbone planarity, elevated lowest unoccupied molecular orbital energy level, and more ordered molecular stacking. Consequently, the OSC device based on PM6 : D‐TPh achieved a PCE of 19.05 %, higher than that (PCE=18.42 %) of the device based on PM6 : D‐TN. Large‐area PM6 : D‐TPh devices (1 cm2) yielded a PCE of 18.00 %. More importantly, the extrapolated T80 lifetime of the PM6 : D‐TPh device is over 2800 h with MPP tracking under continuous one‐sun illumination. These results suggest that isomerization strategy is an effective way to optimize the molecular configuration of dimer acceptors for the fabrication of high‐efficiency and stable OSCs.

Isomeric Dimer Acceptors for Stable Organic Solar Cells with over 19 % Efficiency.

The strategy of isomerization is known for its simple yet effective role in optimizing molecular configuration and enhancing the power conversion efficiency (PCE) of organic solar cells (OSCs). However, the impact of isomerization on the design of dimer acceptors has been rarely investigated, and the relationship between the chemical structure and optoelectronic property remains unclear. In this study, we designed and synthesized two dimer acceptor isomers named D-TPh and D-TN, which differ in the positional arrangement of their end capping groups. Compared to D-TN, D-TPh exhibited enhanced backbone planarity, elevated lowest unoccupied molecular orbital energy level, and more ordered molecular stacking. Consequently, the OSC device based on PM6 : D-TPh achieved a PCE of 19.05 %, higher than that (PCE=18.42 %) of the device based on PM6 : D-TN. Large-area PM6 : D-TPh devices (1 cm2) yielded a PCE of 18.00 %. More importantly, the extrapolated T80 lifetime of the PM6 : D-TPh device is over 2800 h with MPP tracking under continuous one-sun illumination. These results suggest that isomerization strategy is an effective way to optimize the molecular configuration of dimer acceptors for the fabrication of high-efficiency and stable OSCs.

Configurational Isomerization‐Induced Orientation Switching: Non‐Fused Ring Dipodal Phosphonic Acids as Hole‐Extraction Layers for Efficient Organic Solar Cells

AbstractPhosphonic acid (PA) self‐assembled molecules have recently emerged as efficient hole‐extraction layers (HELs) for organic solar cells (OSCs). However, the structural effects of PAs on their self‐assembly behaviors on indium tin oxide (ITO) and thus photovoltaic performance remain obscure. Herein, we present a novel class of PAs, namely “non‐fused ring dipodal phosphonic acids” (NFR‐DPAs), featuring simple and malleable non‐fused ring backbones and dipodal phosphonic acid anchoring groups. The efficacy of configurational isomerism in modulating the photoelectronic properties and switching molecular orientation of PAs atop electrodes results in distinct substrate surface energy and electronic characteristics. The NFR‐DPA with linear (C2h symmetry) and brominated backbone exhibits favorable face‐on orientation and enhanced work function modification capability compared to its angular (C2v symmetry) and non‐brominated counterparts. This makes it versatile HELs in mitigating interfacial resistance for energy barrier‐free hole collection, and affording optimal active layer morphology, which results in an impressive efficiency of 19.11 % with a low voltage loss of 0.52 V for binary OSC devices and an excellent efficiency of 19.66 % for ternary OSC devices. This study presents a new dimension to design PA‐based HELs for high‐performance OSCs.

Configurational Isomerization-Induced Orientation Switching: Non-Fused Ring Dipodal Phosphonic Acids as Hole-Extraction Layers for Efficient Organic Solar Cells.

Phosphonic acid (PA) self-assembled molecules have recently emerged as efficient hole-extraction layers (HELs) for organic solar cells (OSCs). However, the structural effects of PAs on their self-assembly behaviors on indium tin oxide (ITO) and thus photovoltaic performance remain obscure. Herein, we present a novel class of PAs, namely "non-fused ring dipodal phosphonic acids" (NFR-DPAs), featuring simple and malleable non-fused ring backbones and dipodal phosphonic acid anchoring groups. The efficacy of configurational isomerism in modulating the photoelectronic properties and switching molecular orientation of PAs atop electrodes results in distinct substrate surface energy and electronic characteristics. The NFR-DPA with linear (C2h symmetry) and brominated backbone exhibits favorable face-on orientation and enhanced work function modification capability compared to its angular (C2v symmetry) and non-brominated counterparts. This makes it versatile HELs in mitigating interfacial resistance for energy barrier-free hole collection, and affording optimal active layer morphology, which results in an impressive efficiency of 19.11 % with a low voltage loss of 0.52 V for binary OSC devices and an excellent efficiency of 19.66 % for ternary OSC devices. This study presents a new dimension to design PA-based HELs for high-performance OSCs.

Role of Near-IR Sensitive Asymmetric A-DA′D–π–A-type Non-Fullerene Acceptors for Efficient Organic Solar Cells: A Theoretical Insight

Non-fullerene acceptor (NFA) molecules attracted huge attention from the photovoltaic community for their potential use in organic solar cells (OSCs). Herein, we designed a series of NFA materials (AR1–AR9) for OSCs by altering end-capped moieties. We employed various advanced density functional theory (DFT) and time-dependent (TD-DFT) approaches to characterize this designed AR1–AR9 series. Compared to the synthetic reference molecule ([Formula: see text], designed molecules AR1–AR9 revealed a smaller bandgap (1.85 eV), and improved absorption spectra ([Formula: see text] 741 nm) in comparison to [Formula: see text] ([Formula: see text] 668 nm), indicating the better potential for the tailored molecules. Furthermore, the designed series (AR1–AR9) shows lower reorganization energy values (for holes and electrons) and lower binding energies (0.323 eV), whereas, improved charge mobilities, showing them better candidates for OSCs. Moreover, frontier molecular orbitals (FMO), open-circuit voltages ([Formula: see text] and improved charge-transfer characteristics have also been investigated. These findings revealed that all developed NFAs exhibited a wide range of exciton dissociation constants and enhanced absorption efficiency with a relatively lower LUMO energy level. Therefore, we believe that these materials will be beneficial in boosting the power conversion efficiency (PCE) of OSC devices by improving their optoelectronic and photophysical properties.

Physics-Informed Machine Learning with Data-Driven Equations for Predicting Organic Solar Cell Performance.

Organic solar cells (OSCs) have emerged as a promising solution in pursuing sustainable energy. This study presents a comprehensive approach to advancing OSC development by integrating data-driven equations from quantum mechanical (QM) descriptors with physics-informed machine learning (PIML) models. We circumvent traditional experimental limitations through high-throughput QM calculations, prioritizing transparent and interpretable models. Using the SISSO++ method, we identified key descriptors that effectively map the relationships between input variables and photovoltaic performance metrics. Our innovative predictive models, derived from SISSO outputs, excel in forecasting critical OSC parameters such as short-circuit current (JSC), open-circuit voltage (VOC), fill factor (FF), and power conversion efficiency (PCEmax), achieving high accuracy even with limited data sets. To validate our models' practical utility, we applied the PIML framework to a newly compiled data set of OSC devices, demonstrating their versatility and capability in pinpointing high-performance materials. This research underscores the strong predictive power of our models, bridging the gap between experimental results and theoretical predictions and making significant contributions to the advancement of sustainable energy technologies.

The effect of fluorinated conjugated side chains on the photovoltaic performance of polymers based on benzodithiophene (BDT) and carbazolobistriazole (CTA)

Reasonable regulation of the structure-performance relationship is extremely crucial to enhancing the device performance of organic solar cells (OSCs). As a novel fused-benzotriazole (BTA) electron-accepting (A) unit, carbazolobistriazole (CTA) has excellent luminescent properties, and the alkyl chains on the three N atoms allow flexible modulation of polymer solubility. However, higher molecular energy levels and weak crystallinity restrict the enhancement of device performance. Herein, a new donor polymer PE97 with CTA as A unit and 4,8-bis(4-(2-ethylhexyl)-3,5-difluorophenyl)benzo[1,2-b:4,5-b’]dithiophene (BDT-P2F) as electron-donating (D) unit was designed and synthesized. In comparison with the first CTA-based polymer PE93 with 4,8-bis(5-(2-ethylhexyl)-4-fluorothiophen-2-yl)benzo[1,2-b:4,5-b’]dithiophene (BDT-TF) as D unit, PE97 realizes stronger molecular stacking conducive to modulation of the active layer morphology and a deeper highest occupied molecular orbital (HOMO) level, which are favorable to increase short-circuit current density (JSC) and open-circuit voltage (VOC) of OSCs. When paired with Y-series non-fullerene acceptor eC9-2F, PE97-based OSC devices have achieved a higher power conversion efficiency (PCE) of 15.5 %, with a VOC of 0.81 V, a JSC of 25.3 mA cm−2, and a fill factor (FF) of 75.7 %, which figures significantly surpass efficiency (13.6 %) of PE93-based devices. These results indicate that the BDT-P2F unit can excellently modulate the optoelectronic properties of CTA-based polymers. This highlights the potential of the BDT-P2F as a promising D unit for polymers with weak crystallinity and limited electron-withdrawing properties.

The superiority of isomeric, fluorination and curtailed π-conjunction on A–D–A type acceptors for organic photovoltaics

The performance of organic solar cell (OSC) devices has been significantly enhanced by the dramatic evolution of A–D–A type non-fullerene acceptors (NFAs). Nevertheless, the structure–property-performance relationship of NFAs in the OSC device is unclear. Here, the intrinsic design factors of isomeric, fluorination and π-conjunction curtailing on the photophysical properties of benzodi (thienopyran) (BDTP) (named NBDTP-M, NBDTTP-M, NBDTP-Fin, and NBDTP-Fout)-based NFAs are discussed. The results show that fluorination on the terminal group of NBDTP-Fout could effectively decrease the highest occupied orbital (HOMO) energy level and the lowest unoccupied orbital (LUMO) energy level. And the long π-conjugated donor unit for NBDTTP-M could increase the HOMO energy level and bring a small HOMO-LUMO energy bandgap. Meanwhile, the substitution of external oxygen atoms and the fluorine atoms in the terminal group could introduce positive changes to the electrostatic potential of the NBDTP-Fout, favouring the charge separation at the donor/acceptor interface. Moreover, the structural design of external oxygen atom substitution, fluorination on the terminal group and curtailed π-conjugated donor unit could decrease the electron vibration-coupling of exciton diffusion, exciton dissociation and electronic transfer processes. The suppression of the exciton decay and charge recombination in those high-performance NFAs indicate that the investigated molecular designs could be effective for further improvement of OSCs.

Systematic anode engineering enabling universal efficiency improvements in organic solar cells

Anode modification and optimization is crucial towards improving performance of organic solar cells (OSCs). PEDOT:PSS is the most common choice as a hole transport layer (HTL) material, but suffers from issues including low conductivity. In this work, three alkyl amine derivatives - methylamine hydrochloride (MA), ethylamine hydrochloride (EA) and propylamine hydrochloride (PA) are doped into the commercially available Al 4083 PEDOT:PSS to form PEDOT:PSS-MA, PEDOT:PSS-EA and PEDOT:PSS-PA, as modified HTLs. All these modified HTLs exhibit improved chemical and electrical properties including work functions (WF), conductivities and charge carrier motilities. The alkyl amine doping shows compatibility in both Small Molecular Acceptors and All-Polymer OSCs. With PEDOT:PSS-MA demonstrates a highest PCE of 18.49 % compared to the 17.84 % of OSC devices prepared with pristine PEDOT:PSS with the PM6:L8-BO system, while PM6:PY-IT all-polymer OSCs improve PCE from 14.53 % to 15.22 %. AFM characterizations reveal that the introduction of the dopants have smoothened the surface morphology of spin-coated HTL films, which contributes towards more efficient charge extraction. In summary, this study not only presents a method of improving OSC efficiencies, but also provides insight and further possible directions towards anode optimization of OSCs.

Design and modification thienonaphthalimides based non-fullerene acceptors for organic solar cells with high photovoltaic performance in visible light absorption range

Herein, we theoretically designed and characterized eight new thienonaphthalimides-based non-fullerene acceptor (NFA) materials (MT1–MT8) derived from 1ad molecule for organic solar cells (OSCs) devices. In this study, density functional theory (DFT) and time-dependent density functional theory were used to perform theoretical characters of all molecules. All computational analysis were successfully done at mPW1PW91/6-31g(d,p) DFT level. Compared with R (3.25 eV), MT4 showed better planarity and narrower band gap of 2.470 eV. A relatively lower excitation energy (2.039 eV) and binding energy (0.431 eV) were also found in MT4. Meanwhile, molecular electrostatic potential, transition density matrix and hole-electron analyses proved that MT4 had better photovoltaic and photophysical properties than R. We also designed J52-Cl:MT4 blend compound to study the charge transfer behavior at the interface which shown successful shift of electrons from donor to acceptor. Therefore, our newly designed molecules have the potential of being good NFAs for efficient OSC devices.

Trifluoromethylation Enables Compact 2D Linear Stacking and Improves the Efficiency and Stability of Q-PHJ Organic Solar Cells.

Compared to the bulk heterojunction (BHJ) devices, the quasiplanar heterojunction (Q-PHJ) exhibits a more stable morphology and superior charge transfer performance. To achieve both high efficiency and long-term stability, it is necessary to design new materials for Q-PHJ devices. In this study, QxIC-CF3 and QxIC-CH3 are designed and synthesized for the first time. The trifluoromethylation of the central core exerts a modulatory effect on the molecular stacking pattern, leveraging the strong electrostatic potential and intermolecular interactions. Compared with QxIC-CH3, the single crystal structure reveals that QxIC-CF3 exhibits a more compact 2D linear stacking behavior. These benefits, combined with the separated electron and hole transport channels in Q-PHJ device, lead to increased charge mobility and reduced energy loss. The devices based on D18/QxIC-CF3 exhibit an efficiency of 18.1%, which is the highest power conversion efficiency (PCE) for Q-PHJ to date. Additionally, the thermodynamic stability of the active layer morphology enhances the lifespan of the aforementioned devices under illumination conditions. Specifically, the T80 is 420 h, which is nearly twice that of the renowned Y6-based BHJ device (T80 = 220h). By combining the advantages of the trifluoromethylation and Q-PHJ device, efficient and stable organic solar cell devices can be constructed.

Superior End-Group Stacking Promotes Simultaneous Multiple Charge-Transfer Mechanisms in Organic Solar Cells with an All-Fused-Ring Nonfullerene Acceptor.

The all-fused-ring acceptor (AFRA) is a success for nonfullerene materials and has attracted considerable attention as its high optical and chemical stability expected to reduce energy loss, and power conversion efficiency (PCE) approaching 15% in constructed all-small-molecule organic solar cells (OSCs). Herein, the intrinsic role of the structure of AFRA F13 and the reason for its high PCE were revealed by comparison with those of typical fused acceptors IDT-IC and Y6. An increased degree of conjugation in F13 leads to broader and red-shifted absorption peaks, facilitating enhancement of the short-circuit current. Multiple charge-transfer mechanisms are mainly attributed to the higher Frenkel exciton (FE) state due to the multiple transition ways for acceptors in the C1-CN:F13 system. The increased number of atoms contributing to the charge-transfer (CT) state facilitated the existence of more superior stacking patterns with easy formation of CT and FE/CT states and a high charge separation rate. It was found using the AFRA is an effective strategy to enhance end-group stacking, enhancing the borrowing of oscillator strength to promote multiple CT mechanisms in the complexes, explaining the high performance of this OSC device. This work is promising to guide designing an efficient AFRA in the future.

Systematic Engineering of Near-Infrared Small Molecules Based on 4H-Cyclopenta[1,2-b:5,4-b']dithiophene Acceptors for Organic Solar Cells.

Nonfullerene acceptors (NFAs) have emerged as tremendous materials, efficiently advancing bulk-heterojunction organic solar cells (OSCs) technology. Unlike their fullerene counterparts, NFAs offer the unique advantage of finely tunable electronic energy levels and optical characteristics, which correspond to substantial enhancement in power conversion efficiency of OSCs. Herein, we have introduced a new series of near-infrared NFAs (AY1-AY8) to advance this technology further. Our research deeply investigates the structure-property relationship and thoroughly explores the optical, optoelectronics, photophysical, and photovoltaic characteristics of a synthetic reference molecule (R) and the modeled AY1-AY8 NFAs series. We performed advanced quantum chemical simulations using density functional theory (DFT) and time-dependent DFT methods. Additionally, we also estimated key geometric characteristics such as frontier molecular orbitals, hole-electron overlap, density of states, molecular electrostatic potential, molecular excitation and binding energies, transition density matrix, and reorganizational energy of electrons and holes and compared them with those of a synthetic reference molecule (R). Our findings show that all designed materials (AY1-AY8) exhibit red-shift absorption, improved electronic charge mobility, and low binding and excitation energies compared to R. Notably, these designed materials (AY1-AY8) display significantly narrower electronic energy gaps (E g 1.89-1.71 eV), indicating enhanced charge shifting from the highest occupied molecular orbital to lowest unoccupied molecular orbital and broadening of the absorption spectrum. Moreover, we also revealed a comprehensive study of the donor/acceptor complex of PTB7-Th/AY8 to understand charge shifting between donor and acceptor molecules. Therefore, we strongly recommend this designed (AY1-AY8) series to the experimentalists for the future development of highly efficient OSC devices.

Wide Bandgap Polymer Donors Based on Succinimide-Substituted Thiophene for Nonfullerene Organic Solar Cells.

The advent of nonfullerene acceptors (NFAs) has greatly improved the photovoltaic performance of organic solar cells (OSCs). However, to compete with other solar cell technologies, there is a pressing need for accelerated research and development of improved NFAs as well as their compatible wide bandgap polymer donors. In this study, a novel electron-withdrawing building block, succinimide-substituted thiophene (TS), is utilized for the first time to synthesize three wide bandgap polymer donors: PBDT-TS-C5, PBDT-TSBT-C12, and PBDTF-TSBT-C16. These polymers exhibit complementary bandgaps for efficient sunlight harvesting and suitable frontier energy levels for exciton dissociation when paired with the extensively studied NFA, Y6. Among these donors, PBDTF-TSBT-C16 demonstrates the highest hole mobility and a relatively low highest occupied molecular orbital (HOMO) energy level, attributed to the incorporation of thiophene spacers and electron-withdrawing fluorine substituents. OSC devices based on the blend of PBDTF-TSBT-C16:Y6 achieve the highest power conversion efficiencyof 13.21%, with a short circuit current density (Jsc) of 26.83mA cm-2, an open circuit voltage (Voc) of 0.80V, and a fill factorof 0.62. Notably, the Voc × Jsc product reaches 21.46mW cm-2, demonstrating the potential of TS as an electron acceptor building block for the development of high-performance wide bandgap polymer donors in OSCs.

Ligand‐Triggered MXene Quantum Dots with Tunable Work Function as Anode and Cathode Interlayers for Organic Solar Cells

The interfacial layers of organic optoelectronic devices generally suffer from the problems of difficulty in regulating the work function (WF) and low mobility, which are prone to mismatch of interfacial energy levels and loss of carrier transport energy. Herein, O‐terminated and NH2‐terminated Ti3C2Tx MXenes quantum dots (MQDs) are synthesized to develop efficient O‐MQD hole transfer layer (HTL) and E‐MQD electron transfer layer (ETL) for organic optoelectronic devices of organic solar cells (OSCs) and organic photodetectors (OPDs). It is found that the strong electronic coupling interaction between the surface terminations and matrices enables O‐MQD and E‐MQD with tunable WF and satisfactory conductivity. Consequently, in a binary D18:L8‐BO system, the power conversion efficiencies of the OSC device based on O‐MQD HTL and E‐MQD ETL are 18.62% and 18.15%, respectively. Moreover, the OPDs with O‐MQD HTL and E‐MQD ETL exhibit higher shot‐noise‐limited detectivity (Dshot*) of 1.24 × 1013 and 1.10 × 1013 Jones, respectively, compared to the devices using classic interlayers. These findings provide some insights into the design of advanced dual‐function interlayers for organic optoelectronic devices.

5-Chlorobenzoxazole as solid additive for efficient organic solar cells

Adding solid additives to the active layer is a simple and efficient method to adjust the morphology of the active layer to obtain appropriate phase separation, thus improving the organic solar cell device performance. We found a 5-Chlorobenzoxazole molecule as a solid additive to PM6:Y6 system, which increased the filling factor from 66.2 % to 71.0 % and the PCE from 14.8 % to 16.1 %. The results indicate that 5-Chlorobenzoxazole can interact with Y6, thus optimizing the morphology of the active film, enhancing the ability of charge extraction, and further improving FF and PCE.